Internet Draft Sean Harnedy InfiniSwitch Corp. Expiration Date: April 2003 October 2002 Definitions of Managed Objects for the Infiniband Performance Management Agent (PMA) Status of this Memo This document is an Internet-Draft and is in full conformance with all provisions of Section 10 of RFC2026. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. Copyright Notice Copyright (C) The Internet Society (2001). All Rights Reserved. Abstract This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it defines objects for managing InfiniBand Performance Management Agents (PMA). Table of Contents 1. Introduction ................................................. 2 2. The SNMP Management Framework ................................ 2 3. Conventions used in this document ............................ 3 4. Structure of the MIB ......................................... 3 4.1. Overview ................................................... 3 4.2. Discussion of MIB Groups ................................... 3 4.3. The PMA MIB Objects ........................................ 3 4.3.1 The PMA Port Counters Mandatory Group .................... 3 4.3.2 The PMA Port Counters Optional Group ..................... 4 4.3.3 The PMA Port Receive Error Group ......................... 4 4.3.4 The PMA Port Transmit Discard Details Group .............. 4 Expires April 2003 [Page 1] Internet Draft IPOVERIB PMA MIB October 2002 4.3.5 The PMA Port Flow Control Counters Group ................ 4 4.3.6 The PMA Port Op Code Receive Counters Group .............. 4 4.3.7 The PMA Port Op Code VL Counters Group .................. 4 4.3.8 The PMA Port Op Code VL Data Counters Group .............. 4 4.3.9 The PMA Port VL Transmit Flow Control Update Error Group . 4 4.3.10 The PMA Port VL Transmit Wait Group ..................... 4 4.3.11 The PMA Port VL Software Congestion Group ............... 4 4.4. The PMA Conformance Group .................................. 4 4.4.1. PMA Compliance Groups .................................... 4 5. IPOIB PMA MIB Definitions .................................... 5 6. Security Considerations ...................................... 53 7. Intellectual Property ........................................ 53 8 References ................................................... 53 9. Author's Address ............................................. 55 1. Introduction This document defines a MIB for the InfiniBand Performance Managment Agent (PMA). The Infiniband Architecture[IBTAArch] is defined by the Infiniband Trade Association. Infiniband is designed to provide low latency high bandwidth interconnect in a computing environment. This document will define the objects related to managing the Performance Management Agent on each device in an InfiniBand Fabric. 2. The SNMP Management Framework The SNMP Management Framework presently consists of five major components: o An overall architecture, described in RFC 2571[RFC2571]. o Mechanisms for describing and naming objects and events for the purpose of management. The first version of this Structure of Management Information (SMI) is called SMIv1 and described in STD 16, RFC 1155[RFC1155], STD 16, RFC 1212 [RFC1212] and RFC 1215 [RFC1215]. The second version, called SMIv2, is described in STD 58, RFC 2578[RFC2578], STD 58, RFC 2579[RFC2579], and STD 58, RFC 2580[RFC2580]. o Message protocols for transferring management information. The first version of the SNMP message protocol is called SNMPv1 and described in STD 15, RFC 1157[RFC1157]. A second version of the SNMP message protocol, which is not an Internet standards track protocol, is called SNMPv2c and described in RFC 1901[RFC1901] and RFC 1906[RFC1906]. The third version of the message protocol is called SNMPv3 and described in RFC 1906[RFC1906], RFC 2572[RFC2572] and RFC 2574[RFC2574]. o Protocol operations for accessing management information. The first set of protocol operations and associated PDU Expires April 2003 [Page 2] Internet Draft IPOVERIB PMA MIB October 2002 formats is described in STD 15, RFC 1157[RFC1157]. A second set of protocol operations and associated PDU formats is described in RFC 1905[RFC1905]. o A set of fundamental applications described in RFC 2573[RFC2573] and the view-based access control mechanism described in RFC 2575[RFC2575]. A more detailed introduction to the current SNMP Management Framework can be found in RFC 2570[RFC2570]. Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the mechanisms defined in the SMI. This memo specifies a MIB module that is compliant to the SMIv2. A MIB conforming to the SMIv1 can be produced through the appropriate translations. The resulting translated MIB must be semantically equivalent, except where objects or events are omitted because no translation is possible (use of Counter64). Some machine readable information in SMIv2 will be converted into textual descriptions in SMIv1 during the translation process. However, this loss of machine readable information is not considered to change the semantics of the MIB. 3. Conventions used in this document The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119]. 4. Structure of the MIB This section describes the structure of the IPOIB PMA MIB. 4.1. Overview The SNMP management of the PMA involves the monitoring of key management attributes. The PMA is manadatory on all InfiniBand nodes. 4.2. Discussion of MIB Groups The PMA MIB is divided into two basic groups: MIB objects and the conformance section. 4.3. The PMA MIB Objects There are eleven general groups of PMA MIB objects. 4.3.1 The PMA Port Counters Mandatory Group Expires April 2003 [Page 3] Internet Draft IPOVERIB PMA MIB October 2002 This group provides the mandatory PMA port counters. 4.3.2 The PMA Port Counters Optional Group This group provides the optional PMA port counters. 4.3.3 The PMA Port Receive Error Group This group provides the receive errors PMA port counters. 4.3.4 The PMA Port Transmit Discard Details Group This group provides the transmit discard details PMA port counters. 4.3.5 The PMA Port Flow Control Counters Group This group provides the flow control PMA port counters. 4.3.6 The PMA Port Op Code Receive Counters Group This group provides the op code receive PMA port counters. 4.3.7 The PMA Port Op Code VL Counters Group This group provides the op code VL PMA port counters. 4.3.8 The PMA Port Op Code VL Data Counters Group This group provides the op code VL data PMA port counters. 4.3.9 The PMA Port VL Transmit Flow Control Update Error Group This group provides the VL transmit flow control update errors PMA port counters. 4.3.10 The PMA Port VL Transmit Wait Group This group provides the VL transmit wait PMA port counters. 4.3.11 The PMA Port VL Software Congestion Group This group provides the VL software congestion PMA port counters. 4.4. The PMA Conformance Group The PMA Conformance Group lists the possible compliances for various types of InfiniBand nodes (basic and full), and the units of conformance that define the constituent object groups. 4.4.1. PMA Compliance Groups The PMA Compliance Groups list acceptable MIB implementation Expires April 2003 [Page 4] Internet Draft IPOVERIB PMA MIB October 2002 requirements. 5. IPOIB PMA MIB Definitions PMA-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Counter32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF IbDataPort, infinibandMIB FROM IB-TC-MIB; ibPmaMIB MODULE-IDENTITY LAST-UPDATED "200210191200Z" -- October 19, 2002 ORGANIZATION "IETF IP Over IB Working Group Email: ipoib@ietf.org" CONTACT-INFO "Sean Harnedy (sharnedy@infiniswitch.com) InfiniSwitch Corporation" DESCRIPTION "This module contains managed object definitions for the Performance Management Agent instrumentation for an InfiniBand Performance Management Agent (PMA)." REVISION "200210191200Z" -- October 19, 2002 12:00:00 GMT DESCRIPTION "Initial IETF Draft Revision (-00)." ::= { infinibandMIB 6 } --**************************************************************** -- Object Indentifiers for the IPOIB PMA MIB --**************************************************************** ibPmaObjects OBJECT IDENTIFIER ::= { ibPmaMIB 1 } ibPmaConformance OBJECT IDENTIFIER ::= { ibPmaMIB 2 } --**************************************************************** -- Port Counters Group -- -- DESCRIPTION: This Group provides basic performance and exception -- statistics for a port. This group contains 2 tables: one for -- the mandatory counters and one for the optional counters. -- These objects are based on the PortCounters attribute. -- -- NOTE: during operation, instead of "overflowing" these counters -- stop at all 1's (until reset by the PMA). --**************************************************************** ibPmaPortCntrsInfo OBJECT IDENTIFIER ::= { ibPmaObjects 1 } --**************************************************************** -- The Mandatory Port Counters Table --**************************************************************** Expires April 2003 [Page 5] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortCntrsTable OBJECT-TYPE SYNTAX SEQUENCE OF IbPmaPortCntrsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing PMA Port Counters information." ::= { ibPmaPortCntrsInfo 1 } ibPmaPortCntrsEntry OBJECT-TYPE SYNTAX IbPmaPortCntrsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ibPmaPortCntrsTable containing information about the basic performance and exception statistics for a particular data port." INDEX { ibPmaPortCntrsIndex } ::= { ibPmaPortCntrsTable 1 } IbPmaPortCntrsEntry ::= SEQUENCE { ibPmaPortCntrsIndex IbDataPort, ibPmaSymbolErrCounter Integer32, ibPmaLinkErrRecoveryCntr Integer32, ibPmaLinkDownedCntr Integer32, ibPmaPortRcvErr Integer32, ibPmaPortRcvRemPhysErr Integer32, ibPmaPortRcvSwitchRelayErr Integer32, ibPmaPortXmitDiscard Integer32, ibPmaPortXmitConstraintErr Integer32, ibPmaPortRcvConstraintErr Integer32, ibPmaLocalLinkIntegrityErr Integer32, ibPmaExcessBufOverrunErr Integer32, ibPmaVl15Dropped Integer32 } ibPmaPortCntrsIndex OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index that identifies the InfiniBand data port. The IBA defines a range of valid data ports from 1 to N, where N can have a maximum value of 254." ::= { ibPmaPortCntrsEntry 1 } Expires April 2003 [Page 6] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaSymbolErrCounter OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of symbol errors detected on one or more lanes." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 188 PortCounters::PortSymbolErrorCounter." ::= { ibPmaPortCntrsEntry 2 } ibPmaLinkErrRecoveryCntr OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of times the Port Training state machine has successfully completed the link error recovery process." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 188 PortCounters::LinkErrorRecoveryCounters." ::= { ibPmaPortCntrsEntry 3 } ibPmaLinkDownedCntr OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of times the Port Training state machine has failed the link error recovery process and downed the link." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 188 PortCounters::LinkDownedCounter." ::= { ibPmaPortCntrsEntry 4 } ibPmaPortRcvErr OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets containing an error that were received on the port. These errors include: - Local physical errors (ICRC, VCRC, FCCRC, and all physical errors that cause entry into the BAD PACKET of BAD PACKET DISCARD states of the packet receiver state machine) - Malformed data packet errors (LVer, length, VL) - Malformed link packet errors (operand, length, VL) - Packets discarded due to buffer overrun." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 188 PortCounters::PortRcvErrors." ::= { ibPmaPortCntrsEntry 5 } Expires April 2003 [Page 7] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortRcvRemPhysErr OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets marked with the EBP delimeter received on the port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 188 PortCounters::PortRcvRemotePhysicalErrors." ::= { ibPmaPortCntrsEntry 6 } ibPmaPortRcvSwitchRelayErr OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received on the port that are discarded because they could not be forwarded by the switch relay. Reasons for this include: - DLID mapping - VL mapping - looping (output port = input port)" REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 188 PortCounters::PortRcvSwitchRelayErrors." ::= { ibPmaPortCntrsEntry 7 } ibPmaPortXmitDiscard OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of outbound packets discarded by the port because the port is down or congested. Reasons for this include: - output port is in the inactive state - packet length exceeded neighbor MTU - switch lifetime limit exceeded - switch HOQ limit exceeded." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 188 PortCounters::PortXmitDiscards." ::= { ibPmaPortCntrsEntry 8 } Expires April 2003 [Page 8] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortXmitConstraintErr OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets not transmitted from the port for the following reasons: - FilterRawOutbound is true and packet is raw - PartitionEnforcementOutbound is true and packet fails partition key check, IP version check, or transport header version check." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 188 PortCounters::PortXmitConstraintErrors." ::= { ibPmaPortCntrsEntry 9 } ibPmaPortRcvConstraintErr OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received on the port that are discarded for the following reasons: - FilterRawInbound is true and packet is raw - PartitionEnforcementInbound is true and packet fails partition key check, IP version check, or transport header version check." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 188 PortCounters::PortRcvConstraintErrors." ::= { ibPmaPortCntrsEntry 10 } ibPmaLocalLinkIntegrityErr OBJECT-TYPE SYNTAX Integer32(0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that the frequency of packets containing local physical errors exceeded local_phy_errors." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 188 PortCounters::LocalLinkIntegrityErrors." ::= { ibPmaPortCntrsEntry 11 } Expires April 2003 [Page 9] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaExcessBufOverrunErr OBJECT-TYPE SYNTAX Integer32(0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that overrun_errors consecutive flow control update periods occurred with at least one overrun error in each period." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 188 PortCounters::ExcessiveBufferOverrunErrors." ::= { ibPmaPortCntrsEntry 12 } ibPmaVl15Dropped OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incoming VL 15 packets dropped due to resource limitations on port due to lack of buffers." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 188 PortCounters::VL15Dropped." ::= { ibPmaPortCntrsEntry 13 } --**************************************************************** -- The Optional Port Counters Table --**************************************************************** ibPmaPortCntrsOptTable OBJECT-TYPE SYNTAX SEQUENCE OF IbPmaPortCntrsOptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the optional PMA Port Counters information." ::= { ibPmaPortCntrsInfo 2 } ibPmaPortCntrsOptEntry OBJECT-TYPE SYNTAX IbPmaPortCntrsOptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ibPmaPortCntrsOptTable containing information about the optional performance and exception statistics for a particular data port." INDEX { ibPmaPortCntrsOptIndex } ::= { ibPmaPortCntrsOptTable 1 } Expires April 2003 [Page 10] Internet Draft IPOVERIB PMA MIB October 2002 IbPmaPortCntrsOptEntry ::= SEQUENCE { ibPmaPortCntrsOptIndex IbDataPort, ibPmaPortXmitData Integer32, ibPmaPortRcvData Integer32, ibPmaPortXmitPkts Integer32, ibPmaPortRcvPkts Integer32 } ibPmaPortCntrsOptIndex OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index that identifies the InfiniBand data port. The IBA defines a range of valid data ports from 1 to N, where N can have a maximum value of 254." ::= { ibPmaPortCntrsOptEntry 1 } ibPmaPortXmitData OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of data octets divided by 4, transmitted on all VLs from the port. This includes all octets between (and not including) the start of packet delimeter and the VCRC. It excludes all link packets. NOTE: This counter is optional and should have a 0 value if not implemented." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 188 PortCounters::PortXmitData." ::= { ibPmaPortCntrsOptEntry 2 } ibPmaPortRcvData OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of data octets divided by 4, received on all VLs from the port. This includes all octets between (and not including) the start of packet delimeter and the VCRC. It excludes all link packets. NOTE: This counter is optional and should have a 0 value if not implemented." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 188 PortCounters::PortRcvData." ::= { ibPmaPortCntrsOptEntry 3 } Expires April 2003 [Page 11] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortXmitPkts OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets, excluding link packets, transmitted on all VLs from the port. NOTE: This counter is optional and should have a 0 value if not implemented." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 188 PortCounters::PortXmitPkts." ::= { ibPmaPortCntrsOptEntry 4 } ibPmaPortRcvPkts OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets, including packets containing errors and excluding link packets, received on all VLs on this port. NOTE: This counter is optional and should have a 0 value if not implemented." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 188 PortCounters::PortRcvPkts." ::= { ibPmaPortCntrsOptEntry 5 } --**************************************************************** -- Port Transmit and Receive Error Group -- -- DESCRIPTION: This Group provides details for receive errors and -- transmit discard details for each port. This group contains -- three tables: The Port Receive Error Details table, The Port -- Transmit Discard Details table, and The Port Flow Control -- Counters Table. -- These three tables are optional. -- -- NOTE: during operation, instead of "overflowing" these counters -- stop at all 1's (until reset by the PMA). --**************************************************************** ibPmaPortXmitRecvInfo OBJECT IDENTIFIER ::= { ibPmaObjects 2 } --**************************************************************** -- The Port Receive Error Details Table --**************************************************************** Expires April 2003 [Page 12] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortRcvErrTable OBJECT-TYPE SYNTAX SEQUENCE OF IbPmaPortRcvErrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing PMA Port Receive Error information." ::= { ibPmaPortXmitRecvInfo 1 } ibPmaPortRcvErrEntry OBJECT-TYPE SYNTAX IbPmaPortRcvErrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ibPmaPortRcvErrTable containing information about the receive error statistics for a particular data port." INDEX { ibPmaPortRcvErrIndex } ::= { ibPmaPortRcvErrTable 1 } IbPmaPortRcvErrEntry ::= SEQUENCE { ibPmaPortRcvErrIndex IbDataPort, ibPmaPortRcvErrLocalPhysErrs Integer32, ibPmaPortMalformedPacketErrs Integer32, ibPmaPortBufferOverrunErrs Integer32, ibPmaPortDLIDMappingErrs Integer32, ibPmaPortVLMappingErrs Integer32, ibPmaPortLoopingErrs Integer32 } ibPmaPortRcvErrIndex OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index that identifies the InfiniBand data port. The IBA defines a range of valid data ports from 1 to N, where N can have a maximum value of 254." ::= { ibPmaPortRcvErrEntry 1 } ibPmaPortRcvErrLocalPhysErrs OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received on the port that contain local physical errors (ICRC, VCRC, FCCRC, and all physical errors that cause entry into the BAD PACKET or BAD PACKET DISCARD states of the packet receiver state machine)." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.1; Table 191 PortRcvErrorDetails::PortLocalPhysicalErrors." ::= { ibPmaPortRcvErrEntry 2 } Expires April 2003 [Page 13] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortMalformedPacketErrs OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received on the port that contain malformed packet errors. -data packets: LVer, length, VL -link packets: operand, length VL" REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.1; Table 191 PortRcvErrorDetails::PortMalformedPacketErrors." ::= { ibPmaPortRcvErrEntry 3 } ibPmaPortBufferOverrunErrs OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received on the port that were discarded due to buffer overrun." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.1; Table 191 PortRcvErrorDetails::PortBufferOverrunErrors." ::= { ibPmaPortRcvErrEntry 4 } ibPmaPortDLIDMappingErrs OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received on the port that were discarded because they could not be forwarded by the switch relay due to DLID mapping errors." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.1; Table 191 PortRcvErrorDetails::PortDLIDMappingErrors." ::= { ibPmaPortRcvErrEntry 5 } ibPmaPortVLMappingErrs OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received on the port that were discarded because they could not be forwarded by the switch relay due to VL mapping errors." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.1; Table 191 PortRcvErrorDetails::PortVLMappingErrors." ::= { ibPmaPortRcvErrEntry 6 } Expires April 2003 [Page 14] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortLoopingErrs OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received on the port that were discarded because they could not be forwarded by the switch relay due to looping errors (where the output port = the input port)." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.1; Table 191 PortRcvErrorDetails::PortLoopingErrors." ::= { ibPmaPortRcvErrEntry 7 } --**************************************************************** -- The Port Transmit Discard Details Table --**************************************************************** ibPmaPortXmitDiscardTable OBJECT-TYPE SYNTAX SEQUENCE OF IbPmaPortXmitDiscardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing PMA Port Transmit Discard details." ::= { ibPmaPortXmitRecvInfo 2 } ibPmaPortXmitDiscardEntry OBJECT-TYPE SYNTAX IbPmaPortXmitDiscardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ibPmaPortXmitDiscardTable containing information about the transmit discard details for a particular data port." INDEX { ibPmaPortXmitDiscardIndex } ::= { ibPmaPortXmitDiscardTable 1 } IbPmaPortXmitDiscardEntry ::= SEQUENCE { ibPmaPortXmitDiscardIndex IbDataPort, ibPmaPortInactiveDiscards Integer32, ibPmaPortNeighborMtuDiscards Integer32, ibPmaPortSwLifetimeLimitDiscards Integer32, ibPmaPortSwHoqLimitDiscards Integer32 } Expires April 2003 [Page 15] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortXmitDiscardIndex OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index that identifies the InfiniBand data port. The IBA defines a range of valid data ports from 1 to N, where N can have a maximum value of 254." ::= { ibPmaPortXmitDiscardEntry 1 } ibPmaPortInactiveDiscards OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of outbound packets discarded by the port because it is in the inactive state." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.2; Table 192 PortXmitDisacrdDetails::PortInactiveDiscards." ::= { ibPmaPortXmitDiscardEntry 2 } ibPmaPortNeighborMtuDiscards OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of outbound packets discarded by the port because packet length exceeded the neighbor MTU." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.2; Table 192 PortXmitDisacrdDetails::PortNeighborMTUDiscards." ::= { ibPmaPortXmitDiscardEntry 3 } ibPmaPortSwLifetimeLimitDiscards OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of outbound packets discarded by the port because the switch lifetime limit was exceeded. (This value is only relevant for switches; otherwise the value should be 0)." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.2; Table 192 PortXmitDisacrdDetails::PortSwLifetimeLimitDiscards." ::= { ibPmaPortXmitDiscardEntry 4 } Expires April 2003 [Page 16] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortSwHoqLimitDiscards OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of outbound packets discarded by the port because the switch HOQ lifetime was exceeded. (This object applies to switches only. For other InfiniBand entities this should have a value of 0)." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.2; Table 192 PortXmitDisacrdDetails::PortSwHOQLimitDiscards." ::= { ibPmaPortXmitDiscardEntry 5 } --**************************************************************** -- Port Flow Control Counters Table --**************************************************************** ibPmaPortFlowCtlCntrsTable OBJECT-TYPE SYNTAX SEQUENCE OF IbPmaPortXmitDiscardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing PMA Port Flow Control counters information." ::= { ibPmaPortXmitRecvInfo 3 } ibPmaPortFlowCtlCntrsEntry OBJECT-TYPE SYNTAX IbPmaPortFlowCtlCntrsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ibPmaPortFLowCtlCntrsTable containing information about the flow control statistics for a particular data port." INDEX { ibPmaPortFlowCtlCntrsIndex } ::= { ibPmaPortFlowCtlCntrsTable 1 } IbPmaPortFlowCtlCntrsEntry ::= SEQUENCE { ibPmaPortFlowCtlCntrsIndex IbDataPort, ibPmaPortFlowCtlXmitFlowPkts Integer32, ibPmaPortFlowCtlRcvFlowPkts Integer32 } ibPmaPortFlowCtlCntrsIndex OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index that identifies the InfiniBand data port. The IBA defines a range of valid data ports from 1 to N, where N can have a maximum value of 254." ::= { ibPmaPortFlowCtlCntrsEntry 1 } Expires April 2003 [Page 17] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortFlowCtlXmitFlowPkts OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flow control packets transmitted on the port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.4; Table 194 PortFlowCtlCounters::PortXmitFlowPkts." ::= { ibPmaPortFlowCtlCntrsEntry 2 } ibPmaPortFlowCtlRcvFlowPkts OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flow control packets received on the port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.4; Table 194 PortFlowCtlCounters::PortRcvFlowPkts." ::= { ibPmaPortFlowCtlCntrsEntry 3 } --**************************************************************** -- Port Op Code Group -- -- DESCRIPTION: This Group provides details for port statistics -- indexed by op code and port number. This group contains -- three tables: The Port Op Code Receive Counters Group, The -- Port Op Code Virtual Lane Counters Group, and The Port Op -- Code Virtual Lane Data Counters Group. -- These three tables are optional. -- -- NOTE: during operation, instead of "overflowing" these counters -- stop at all 1's (until reset by the PMA). --**************************************************************** ibPmaPortOpCodeInfo OBJECT IDENTIFIER ::= { ibPmaObjects 3 } --**************************************************************** -- Port Op Code Receive Counters Group --**************************************************************** ibPmaPortOpCodeRcvCntrsTable OBJECT-TYPE SYNTAX SEQUENCE OF IbPmaPortOpCodeRcvCntrsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing PMA Port Counters per Op Code information." ::= { ibPmaPortOpCodeInfo 1 } Expires April 2003 [Page 18] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortOpCodeRcvCntrsEntry OBJECT-TYPE SYNTAX IbPmaPortOpCodeRcvCntrsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ibPmaPortOpCodeRcvCntrsTable containing information about the receive counters per op code for a particular data port." INDEX { ibPmaPortOpCodeRcvCntrsPortIndex, ibPmaPortOpCodeRcvCntrsIndex } ::= { ibPmaPortOpCodeRcvCntrsTable 1 } IbPmaPortOpCodeRcvCntrsEntry ::= SEQUENCE { ibPmaPortOpCodeRcvCntrsPortIndex IbDataPort, ibPmaPortOpCodeRcvCntrsIndex Integer32, ibPmaPortOpCodeRcvCntrsRcvPkts Counter32, ibPmaPortOpCodeRcvCntrsRcvData Counter32 } ibPmaPortOpCodeRcvCntrsPortIndex OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index that identifies the InfiniBand data port. The IBA defines a range of valid data ports from 1 to N, where N can have a maximum value of 254." ::= { ibPmaPortOpCodeRcvCntrsEntry 1 } ibPmaPortOpCodeRcvCntrsIndex OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The op code for which this statistic is being reported. Note: this is a 1-based value." ::= { ibPmaPortOpCodeRcvCntrsEntry 2 } ibPmaPortOpCodeRcvCntrsRcvPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received without error on this port for this op code." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.3; Table 193 PortOpRcvCounters::PortOpRcvPkts." ::= { ibPmaPortOpCodeRcvCntrsEntry 3 } Expires April 2003 [Page 19] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortOpCodeRcvCntrsRcvData OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of data octets (divided by 4) received without error for all VLs on this port for this op code. This includes all octets between the start of packet delimeter and the VCRC, exclusive. It excludes all link packets." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.3; Table 193 PortOpRcvCounters::PortOpRcvData." ::= { ibPmaPortOpCodeRcvCntrsEntry 4 } --**************************************************************** -- Port Op Code Virtual Lane Counters Group --**************************************************************** ibPmaPortOpCodeVlCntrsTable OBJECT-TYPE SYNTAX SEQUENCE OF IbPmaPortOpCodeVlCntrsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing PMA Port virtual lane op code information." ::= { ibPmaPortOpCodeInfo 2 } ibPmaPortOpCodeVlCntrsEntry OBJECT-TYPE SYNTAX IbPmaPortOpCodeVlCntrsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ibPmaPortOpCodeVlCntrsTable containing information about the virtual lane statistics for a particular data port based on op code." INDEX { ibPmaPortOpCodeVlCntrsPortIndex, ibPmaPortOpCodeVlCntrsIndex } ::= { ibPmaPortOpCodeVlCntrsTable 1 } IbPmaPortOpCodeVlCntrsEntry ::= SEQUENCE { ibPmaPortOpCodeVlCntrsPortIndex IbDataPort, ibPmaPortOpCodeVlCntrsIndex Integer32, ibPmaPortVlOpPkt0 Integer32, ibPmaPortVlOpPkt1 Integer32, ibPmaPortVlOpPkt2 Integer32, ibPmaPortVlOpPkt3 Integer32, ibPmaPortVlOpPkt4 Integer32, ibPmaPortVlOpPkt5 Integer32, ibPmaPortVlOpPkt6 Integer32, ibPmaPortVlOpPkt7 Integer32, ibPmaPortVlOpPkt8 Integer32, ibPmaPortVlOpPkt9 Integer32, ibPmaPortVlOpPkt10 Integer32, ibPmaPortVlOpPkt11 Integer32, Expires April 2003 [Page 20] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlOpPkt12 Integer32, ibPmaPortVlOpPkt13 Integer32, ibPmaPortVlOpPkt14 Integer32, ibPmaPortVlOpPkt15 Integer32 } ibPmaPortOpCodeVlCntrsPortIndex OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index that identifies the InfiniBand data port. The IBA defines a range of valid data ports from 1 to N, where N can have a maximum value of 254." ::= { ibPmaPortOpCodeVlCntrsEntry 1 } ibPmaPortOpCodeVlCntrsIndex OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The op code for which this statistic is being reported. Note: this is a 1-based value." ::= { ibPmaPortOpCodeVlCntrsEntry 2 } ibPmaPortVlOpPkt0 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received without error on the port using this op code for Virtual Lane 0." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.5; Table 195 PortVLOpPackets::PortVLOpPacket0." ::= { ibPmaPortOpCodeVlCntrsEntry 3 } ibPmaPortVlOpPkt1 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received without error on the port using this op code for Virtual Lane 1." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.5; Table 195 PortVLOpPackets::PortVLOpPacket1." ::= { ibPmaPortOpCodeVlCntrsEntry 4 } Expires April 2003 [Page 21] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlOpPkt2 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received without error on the port using this op code for Virtual Lane 2." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.5; Table 195 PortVLOpPackets::PortVLOpPacket2." ::= { ibPmaPortOpCodeVlCntrsEntry 5 } ibPmaPortVlOpPkt3 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received without error on the port using this op code for Virtual Lane 3." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.5; Table 195 PortVLOpPackets::PortVLOpPacket3." ::= { ibPmaPortOpCodeVlCntrsEntry 6 } ibPmaPortVlOpPkt4 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received without error on the port using this op code for Virtual Lane 4." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.5; Table 195 PortVLOpPackets::PortVLOpPacket4." ::= { ibPmaPortOpCodeVlCntrsEntry 7 } ibPmaPortVlOpPkt5 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received without error on the port using this op code for Virtual Lane 5." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.5; Table 195 PortVLOpPackets::PortVLOpPacket5." ::= { ibPmaPortOpCodeVlCntrsEntry 8 } Expires April 2003 [Page 22] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlOpPkt6 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received without error on the port using this op code for Virtual Lane 6." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.5; Table 195 PortVLOpPackets::PortVLOpPacket6." ::= { ibPmaPortOpCodeVlCntrsEntry 9 } ibPmaPortVlOpPkt7 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received without error on the port using this op code for Virtual Lane 7." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.5; Table 195 PortVLOpPackets::PortVLOpPacket7." ::= { ibPmaPortOpCodeVlCntrsEntry 10 } ibPmaPortVlOpPkt8 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received without error on the port using this op code for Virtual Lane 8." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.5; Table 195 PortVLOpPackets::PortVLOpPacket8." ::= { ibPmaPortOpCodeVlCntrsEntry 11 } ibPmaPortVlOpPkt9 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received without error on the port using this op code for Virtual Lane 9." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.5; Table 195 PortVLOpPackets::PortVLOpPacket9." ::= { ibPmaPortOpCodeVlCntrsEntry 12 } Expires April 2003 [Page 23] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlOpPkt10 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received without error on the port using this op code for Virtual Lane 10." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.5; Table 195 PortVLOpPackets::PortVLOpPacket10." ::= { ibPmaPortOpCodeVlCntrsEntry 13 } ibPmaPortVlOpPkt11 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received without error on the port using this op code for Virtual Lane 11." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.5; Table 195 PortVLOpPackets::PortVLOpPacket11." ::= { ibPmaPortOpCodeVlCntrsEntry 14 } ibPmaPortVlOpPkt12 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received without error on the port using this op code for Virtual Lane 12." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.5; Table 195 PortVLOpPackets::PortVLOpPacket12." ::= { ibPmaPortOpCodeVlCntrsEntry 15 } ibPmaPortVlOpPkt13 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received without error on the port using this op code for Virtual Lane 13." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.5; Table 195 PortVLOpPackets::PortVLOpPacket13." ::= { ibPmaPortOpCodeVlCntrsEntry 16 } Expires April 2003 [Page 24] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlOpPkt14 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received without error on the port using this op code for Virtual Lane 14." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.5; Table 195 PortVLOpPackets::PortVLOpPacket14." ::= { ibPmaPortOpCodeVlCntrsEntry 17 } ibPmaPortVlOpPkt15 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received without error on the port using this op code for Virtual Lane 15." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.5; Table 195 PortVLOpPackets::PortVLOpPacket15." ::= { ibPmaPortOpCodeVlCntrsEntry 18 } --**************************************************************** -- Port Op Code Virtual Lane Data Counters Table --**************************************************************** ibPmaPortOpCodeVlDataCntrsTable OBJECT-TYPE SYNTAX SEQUENCE OF IbPmaPortOpCodeVlCntrsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing PMA Port virtual lane op code information about the number of data octets received without error." ::= { ibPmaPortOpCodeInfo 3 } ibPmaPortOpCodeVlDataCntrsEntry OBJECT-TYPE SYNTAX IbPmaPortOpCodeVlDataCntrsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ibPmaPortCntrsTable containing information about the basic performance and exception statistics for a particular data port." INDEX { ibPmaPortOpCodeVlDataPortIndex, ibPmaPortOpCodeVlDataIndex } ::= { ibPmaPortOpCodeVlDataCntrsTable 1 } Expires April 2003 [Page 25] Internet Draft IPOVERIB PMA MIB October 2002 IbPmaPortOpCodeVlDataCntrsEntry ::= SEQUENCE { ibPmaPortOpCodeVlDataPortIndex IbDataPort, ibPmaPortOpCodeVlDataIndex Integer32, ibPmaPortVlOpData0 Counter32, ibPmaPortVlOpData1 Counter32, ibPmaPortVlOpData2 Counter32, ibPmaPortVlOpData3 Counter32, ibPmaPortVlOpData4 Counter32, ibPmaPortVlOpData5 Counter32, ibPmaPortVlOpData6 Counter32, ibPmaPortVlOpData7 Counter32, ibPmaPortVlOpData8 Counter32, ibPmaPortVlOpData9 Counter32, ibPmaPortVlOpData10 Counter32, ibPmaPortVlOpData11 Counter32, ibPmaPortVlOpData12 Counter32, ibPmaPortVlOpData13 Counter32, ibPmaPortVlOpData14 Counter32, ibPmaPortVlOpData15 Counter32 } ibPmaPortOpCodeVlDataPortIndex OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index that identifies the InfiniBand data port. The IBA defines a range of valid data ports from 1 to N, where N can have a maximum value of 254." ::= { ibPmaPortOpCodeVlDataCntrsEntry 1 } ibPmaPortOpCodeVlDataIndex OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The op code for which this statistic is being reported. Note: this is a 1-based value." ::= { ibPmaPortOpCodeVlDataCntrsEntry 2 } ibPmaPortVlOpData0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of data octets (divided by 4) that were received on VL 0 for this port and op code. This count includes all octets between the start of the packet and VCRC, exclusive. It excludes all link packets." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 196 PortVLOpData::PortVLOpData0." ::= { ibPmaPortOpCodeVlDataCntrsEntry 3 } Expires April 2003 [Page 26] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlOpData1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of data octets (divided by 4) that were received on VL 1 for this port and op code. This count includes all octets between the start of the packet and VCRC, exclusive. It excludes all link packets." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 196 PortVLOpData::PortVLOpData1." ::= { ibPmaPortOpCodeVlDataCntrsEntry 4 } ibPmaPortVlOpData2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of data octets (divided by 4) that were received on VL 2 for this port and op code. This count includes all octets between the start of the packet and VCRC, exclusive. It excludes all link packets." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 196 PortVLOpData::PortVLOpData2." ::= { ibPmaPortOpCodeVlDataCntrsEntry 5 } ibPmaPortVlOpData3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of data octets (divided by 4) that were received on VL 3 for this port and op code. This count includes all octets between the start of the packet and VCRC, exclusive. It excludes all link packets." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 196 PortVLOpData::PortVLOpData3." ::= { ibPmaPortOpCodeVlDataCntrsEntry 6 } ibPmaPortVlOpData4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of data octets (divided by 4) that were received on VL 4 for this port and op code. This count includes all octets between the start of the packet and VCRC, exclusive. It excludes all link packets." Expires April 2003 [Page 27] Internet Draft IPOVERIB PMA MIB October 2002 REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 196 PortVLOpData::PortVLOpData4." ::= { ibPmaPortOpCodeVlDataCntrsEntry 7 } ibPmaPortVlOpData5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of data octets (divided by 4) that were received on VL 5 for this port and op code. This count includes all octets between the start of the packet and VCRC, exclusive. It excludes all link packets." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 196 PortVLOpData::PortVLOpData5." ::= { ibPmaPortOpCodeVlDataCntrsEntry 8 } ibPmaPortVlOpData6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of data octets (divided by 4) that were received on VL 6 for this port and op code. This count includes all octets between the start of the packet and VCRC, exclusive. It excludes all link packets." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 196 PortVLOpData::PortVLOpData6." ::= { ibPmaPortOpCodeVlDataCntrsEntry 9 } ibPmaPortVlOpData7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of data octets (divided by 4) that were received on VL 7 for this port and op code. This count includes all octets between the start of the packet and VCRC, exclusive. It excludes all link packets." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 196 PortVLOpData::PortVLOpData7." ::= { ibPmaPortOpCodeVlDataCntrsEntry 10 } ibPmaPortVlOpData8 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current Expires April 2003 [Page 28] Internet Draft IPOVERIB PMA MIB October 2002 DESCRIPTION "Total number of data octets (divided by 4) that were received on VL 8 for this port and op code. This count includes all octets between the start of the packet and VCRC, exclusive. It excludes all link packets." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 196 PortVLOpData::PortVLOpData8." ::= { ibPmaPortOpCodeVlDataCntrsEntry 11 } ibPmaPortVlOpData9 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of data octets (divided by 4) that were received on VL 9 for this port and op code. This count includes all octets between the start of the packet and VCRC, exclusive. It excludes all link packets." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 196 PortVLOpData::PortVLOpData9." ::= { ibPmaPortOpCodeVlDataCntrsEntry 12 } ibPmaPortVlOpData10 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of data octets (divided by 4) that were received on VL 10 for this port and op code. This count includes all octets between the start of the packet and VCRC, exclusive. It excludes all link packets." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 196 PortVLOpData::PortVLOpData10." ::= { ibPmaPortOpCodeVlDataCntrsEntry 13 } ibPmaPortVlOpData11 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of data octets (divided by 4) that were received on VL 11 for this port and op code. This count includes all octets between the start of the packet and VCRC, exclusive. It excludes all link packets." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 196 PortVLOpData::PortVLOpData11." ::= { ibPmaPortOpCodeVlDataCntrsEntry 14 } Expires April 2003 [Page 29] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlOpData12 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of data octets (divided by 4) that were received on VL 12 for this port and op code. This count includes all octets between the start of the packet and VCRC, exclusive. It excludes all link packets." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 196 PortVLOpData::PortVLOpData12." ::= { ibPmaPortOpCodeVlDataCntrsEntry 15 } ibPmaPortVlOpData13 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of data octets (divided by 4) that were received on VL 13 for this port and op code. This count includes all octets between the start of the packet and VCRC, exclusive. It excludes all link packets." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 196 PortVLOpData::PortVLOpData13." ::= { ibPmaPortOpCodeVlDataCntrsEntry 16 } ibPmaPortVlOpData14 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of data octets (divided by 4) that were received on VL 14 for this port and op code. This count includes all octets between the start of the packet and VCRC, exclusive. It excludes all link packets." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 196 PortVLOpData::PortVLOpData14." ::= { ibPmaPortOpCodeVlDataCntrsEntry 17 } ibPmaPortVlOpData15 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of data octets (divided by 4) that were received on VL 15 for this port and op code. This count includes all octets between the start of the packet and VCRC, exclusive. It excludes all link packets." Expires April 2003 [Page 30] Internet Draft IPOVERIB PMA MIB October 2002 REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 196 PortVLOpData::PortVLOpData15." ::= { ibPmaPortOpCodeVlDataCntrsEntry 18 } --**************************************************************** -- Port Virtual Lane Group -- -- DESCRIPTION: This Group provides details for port statistics -- indexed by the virtual lane within the port. This group -- contains three tables: The Port Virtual Lane Transmit Flow -- Control Error Table, The Port Virtual Lane Transmit Wait -- Counters Table, and The Port Virtual Lane Software Congestion -- Table. -- These three tables are optional. -- -- NOTE: during operation, instead of "overflowing" these counters -- stop at all 1's (until reset by the PMA). --**************************************************************** ibPmaPortVlInfo OBJECT IDENTIFIER ::= { ibPmaObjects 4 } --**************************************************************** -- Port Virtual Lane Transmit Flow Control Error Table --**************************************************************** ibPmaPortVlXmitFCUpErrTable OBJECT-TYPE SYNTAX SEQUENCE OF IbPmaPortCntrsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing PMA Port Virtual Lane Flow Control update errors for a particular port." ::= { ibPmaPortVlInfo 1 } ibPmaPortVlXmitFCUpErrEntry OBJECT-TYPE SYNTAX IbPmaPortVlXmitFCUpErrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ibPmaPortVlXmitFCUpErrTable containing information about the transmit flow control error statistics for the virtual lanes on a particular data port." INDEX { ibPmaPortVlXmitFCUpErrPortIndex } ::= { ibPmaPortVlXmitFCUpErrTable 1 } IbPmaPortVlXmitFCUpErrEntry ::= SEQUENCE { ibPmaPortVlXmitFCUpErrPortIndex IbDataPort, ibPmaPortVlXmitFCUpErr0 Integer32, ibPmaPortVlXmitFCUpErr1 Integer32, ibPmaPortVlXmitFCUpErr2 Integer32, ibPmaPortVlXmitFCUpErr3 Integer32, ibPmaPortVlXmitFCUpErr4 Integer32, Expires April 2003 [Page 31] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlXmitFCUpErr5 Integer32, ibPmaPortVlXmitFCUpErr6 Integer32, ibPmaPortVlXmitFCUpErr7 Integer32, ibPmaPortVlXmitFCUpErr8 Integer32, ibPmaPortVlXmitFCUpErr9 Integer32, ibPmaPortVlXmitFCUpErr10 Integer32, ibPmaPortVlXmitFCUpErr11 Integer32, ibPmaPortVlXmitFCUpErr12 Integer32, ibPmaPortVlXmitFCUpErr13 Integer32, ibPmaPortVlXmitFCUpErr14 Integer32, ibPmaPortVlXmitFCUpErr15 Integer32 } ibPmaPortVlXmitFCUpErrPortIndex OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index that identifies the InfiniBand data port. The IBA defines a range of valid data ports from 1 to N, where N can have a maximum value of 254." ::= { ibPmaPortVlXmitFCUpErrEntry 1 } ibPmaPortVlXmitFCUpErr0 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flow control update errors on VL 0 for this port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.7; Table 197 PortVLXmitFlowCtlUpdateErrors::PortVLXmitFlowCtlUpdateErrors0." ::= { ibPmaPortVlXmitFCUpErrEntry 2 } ibPmaPortVlXmitFCUpErr1 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flow control update errors on VL 1 for this port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.7; Table 197 PortVLXmitFlowCtlUpdateErrors::PortVLXmitFlowCtlUpdateErrors1." ::= { ibPmaPortVlXmitFCUpErrEntry 3 } Expires April 2003 [Page 32] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlXmitFCUpErr2 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flow control update errors on VL 2 for this port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.7; Table 197 PortVLXmitFlowCtlUpdateErrors::PortVLXmitFlowCtlUpdateErrors2." ::= { ibPmaPortVlXmitFCUpErrEntry 4 } ibPmaPortVlXmitFCUpErr3 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flow control update errors on VL 3 for this port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.7; Table 197 PortVLXmitFlowCtlUpdateErrors::PortVLXmitFlowCtlUpdateErrors3." ::= { ibPmaPortVlXmitFCUpErrEntry 5 } ibPmaPortVlXmitFCUpErr4 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flow control update errors on VL 4 for this port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.7; Table 197 PortVLXmitFlowCtlUpdateErrors::PortVLXmitFlowCtlUpdateErrors4." ::= { ibPmaPortVlXmitFCUpErrEntry 6 } ibPmaPortVlXmitFCUpErr5 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flow control update errors on VL 5 for this port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.7; Table 197 PortVLXmitFlowCtlUpdateErrors::PortVLXmitFlowCtlUpdateErrors5." ::= { ibPmaPortVlXmitFCUpErrEntry 7 } Expires April 2003 [Page 33] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlXmitFCUpErr6 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flow control update errors on VL 6 for this port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.7; Table 197 PortVLXmitFlowCtlUpdateErrors::PortVLXmitFlowCtlUpdateErrors6." ::= { ibPmaPortVlXmitFCUpErrEntry 8 } ibPmaPortVlXmitFCUpErr7 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flow control update errors on VL 7 for this port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.7; Table 197 PortVLXmitFlowCtlUpdateErrors::PortVLXmitFlowCtlUpdateErrors7." ::= { ibPmaPortVlXmitFCUpErrEntry 9 } ibPmaPortVlXmitFCUpErr8 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flow control update errors on VL 8 for this port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.7; Table 197 PortVLXmitFlowCtlUpdateErrors::PortVLXmitFlowCtlUpdateErrors8." ::= { ibPmaPortVlXmitFCUpErrEntry 10 } ibPmaPortVlXmitFCUpErr9 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flow control update errors on VL 9 for this port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.7; Table 197 PortVLXmitFlowCtlUpdateErrors::PortVLXmitFlowCtlUpdateErrors9." ::= { ibPmaPortVlXmitFCUpErrEntry 11 } Expires April 2003 [Page 34] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlXmitFCUpErr10 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flow control update errors on VL 10 for this port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.7; Table 197 PortVLXmitFlowCtlUpdateErrors::PortVLXmitFlowCtlUpdateErrors10." ::= { ibPmaPortVlXmitFCUpErrEntry 12 } ibPmaPortVlXmitFCUpErr11 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flow control update errors on VL 11 for this port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.7; Table 197 PortVLXmitFlowCtlUpdateErrors::PortVLXmitFlowCtlUpdateErrors11." ::= { ibPmaPortVlXmitFCUpErrEntry 13 } ibPmaPortVlXmitFCUpErr12 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flow control update errors on VL 12 for this port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.7; Table 197 PortVLXmitFlowCtlUpdateErrors::PortVLXmitFlowCtlUpdateErrors12." ::= { ibPmaPortVlXmitFCUpErrEntry 14 } ibPmaPortVlXmitFCUpErr13 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flow control update errors on VL 13 for this port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.7; Table 197 PortVLXmitFlowCtlUpdateErrors::PortVLXmitFlowCtlUpdateErrors13." ::= { ibPmaPortVlXmitFCUpErrEntry 15 } Expires April 2003 [Page 35] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlXmitFCUpErr14 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flow control update errors on VL 14 for this port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.7; Table 197 PortVLXmitFlowCtlUpdateErrors::PortVLXmitFlowCtlUpdateErrors14." ::= { ibPmaPortVlXmitFCUpErrEntry 16 } ibPmaPortVlXmitFCUpErr15 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flow control update errors on VL 15 for this port." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.7; Table 197 PortVLXmitFlowCtlUpdateErrors::PortVLXmitFlowCtlUpdateErrors15." ::= { ibPmaPortVlXmitFCUpErrEntry 17 } --**************************************************************** -- Port Virtual Lane Transmit Wait Counters Table --**************************************************************** ibPmaPortVlXmitWaitCntrsTable OBJECT-TYPE SYNTAX SEQUENCE OF IbPmaPortVlXmitWaitCntrsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing PMA Port Virtual Lane Tranmsit Wait Counters information." ::= { ibPmaPortVlInfo 2 } ibPmaPortVlXmitWaitCntrsEntry OBJECT-TYPE SYNTAX IbPmaPortVlXmitWaitCntrsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ibPmaPortVlXmitWaitCntrsTable containing information about the transmit wait counters for a virtual lane for a particular data port." INDEX { ibPmaPortVlXmitWaitCntrsIndex } ::= { ibPmaPortVlXmitWaitCntrsTable 1 } IbPmaPortVlXmitWaitCntrsEntry ::= SEQUENCE { ibPmaPortVlXmitWaitCntrsIndex IbDataPort, ibPmaPortVlXmitWait0 Integer32, Expires April 2003 [Page 36] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlXmitWait1 Integer32, ibPmaPortVlXmitWait2 Integer32, ibPmaPortVlXmitWait3 Integer32, ibPmaPortVlXmitWait4 Integer32, ibPmaPortVlXmitWait5 Integer32, ibPmaPortVlXmitWait6 Integer32, ibPmaPortVlXmitWait7 Integer32, ibPmaPortVlXmitWait8 Integer32, ibPmaPortVlXmitWait9 Integer32, ibPmaPortVlXmitWait10 Integer32, ibPmaPortVlXmitWait11 Integer32, ibPmaPortVlXmitWait12 Integer32, ibPmaPortVlXmitWait13 Integer32, ibPmaPortVlXmitWait14 Integer32, ibPmaPortVlXmitWait15 Integer32 } ibPmaPortVlXmitWaitCntrsIndex OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index that identifies the InfiniBand data port. The IBA defines a range of valid data ports from 1 to N, where N can have a maximum value of 254." ::= { ibPmaPortVlXmitWaitCntrsEntry 1 } ibPmaPortVlXmitWait0 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ticks during which the port had data to transmit on VL0 but no data was sent during the entire tick either because of insufficient credits or because of lack of arbitration." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 198 PortVLXmitWaitCounters::PortVLXmitWait0." ::= { ibPmaPortVlXmitWaitCntrsEntry 2 } ibPmaPortVlXmitWait1 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ticks during which the port had data to transmit on VL1 but no data was sent during the entire tick either because of insufficient credits or because of lack of arbitration." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 198 PortVLXmitWaitCounters::PortVLXmitWait1." ::= { ibPmaPortVlXmitWaitCntrsEntry 3 } Expires April 2003 [Page 37] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlXmitWait2 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ticks during which the port had data to transmit on VL2 but no data was sent during the entire tick either because of insufficient credits or because of lack of arbitration." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 198 PortVLXmitWaitCounters::PortVLXmitWait2." ::= { ibPmaPortVlXmitWaitCntrsEntry 4 } ibPmaPortVlXmitWait3 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ticks during which the port had data to transmit on VL3 but no data was sent during the entire tick either because of insufficient credits or because of lack of arbitration." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 198 PortVLXmitWaitCounters::PortVLXmitWait3." ::= { ibPmaPortVlXmitWaitCntrsEntry 5 } ibPmaPortVlXmitWait4 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ticks during which the port had data to transmit on VL4 but no data was sent during the entire tick either because of insufficient credits or because of lack of arbitration." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 198 PortVLXmitWaitCounters::PortVLXmitWait4." ::= { ibPmaPortVlXmitWaitCntrsEntry 6 } ibPmaPortVlXmitWait5 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ticks during which the port had data to transmit on VL5 but no data was sent during the entire tick either because of insufficient credits or because of lack of arbitration." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 198 PortVLXmitWaitCounters::PortVLXmitWait5." ::= { ibPmaPortVlXmitWaitCntrsEntry 7 } Expires April 2003 [Page 38] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlXmitWait6 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ticks during which the port had data to transmit on VL6 but no data was sent during the entire tick either because of insufficient credits or because of lack of arbitration." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 198 PortVLXmitWaitCounters::PortVLXmitWait6." ::= { ibPmaPortVlXmitWaitCntrsEntry 8 } ibPmaPortVlXmitWait7 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ticks during which the port had data to transmit on VL7 but no data was sent during the entire tick either because of insufficient credits or because of lack of arbitration." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 198 PortVLXmitWaitCounters::PortVLXmitWait7." ::= { ibPmaPortVlXmitWaitCntrsEntry 9 } ibPmaPortVlXmitWait8 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ticks during which the port had data to transmit on VL8 but no data was sent during the entire tick either because of insufficient credits or because of lack of arbitration." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 198 PortVLXmitWaitCounters::PortVLXmitWait8." ::= { ibPmaPortVlXmitWaitCntrsEntry 10 } ibPmaPortVlXmitWait9 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ticks during which the port had data to transmit on VL9 but no data was sent during the entire tick either because of insufficient credits or because of lack of arbitration." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 198 PortVLXmitWaitCounters::PortVLXmitWait9." ::= { ibPmaPortVlXmitWaitCntrsEntry 11 } Expires April 2003 [Page 39] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlXmitWait10 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ticks during which the port had data to transmit on VL10 but no data was sent during the entire tick either because of insufficient credits or because of lack of arbitration." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 198 PortVLXmitWaitCounters::PortVLXmitWait10." ::= { ibPmaPortVlXmitWaitCntrsEntry 12 } ibPmaPortVlXmitWait11 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ticks during which the port had data to transmit on VL11 but no data was sent during the entire tick either because of insufficient credits or because of lack of arbitration." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 198 PortVLXmitWaitCounters::PortVLXmitWait11." ::= { ibPmaPortVlXmitWaitCntrsEntry 13 } ibPmaPortVlXmitWait12 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ticks during which the port had data to transmit on VL12 but no data was sent during the entire tick either because of insufficient credits or because of lack of arbitration." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 198 PortVLXmitWaitCounters::PortVLXmitWait12." ::= { ibPmaPortVlXmitWaitCntrsEntry 14 } ibPmaPortVlXmitWait13 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ticks during which the port had data to transmit on VL13 but no data was sent during the entire tick either because of insufficient credits or because of lack of arbitration." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 198 PortVLXmitWaitCounters::PortVLXmitWait13." ::= { ibPmaPortVlXmitWaitCntrsEntry 15 } Expires April 2003 [Page 40] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlXmitWait14 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ticks during which the port had data to transmit on VL14 but no data was sent during the entire tick either because of insufficient credits or because of lack of arbitration." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 198 PortVLXmitWaitCounters::PortVLXmitWait14." ::= { ibPmaPortVlXmitWaitCntrsEntry 16 } ibPmaPortVlXmitWait15 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ticks during which the port had data to transmit on VL15 but no data was sent during the entire tick either because of insufficient credits or because of lack of arbitration." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.4.6; Table 198 PortVLXmitWaitCounters::PortVLXmitWait15." ::= { ibPmaPortVlXmitWaitCntrsEntry 17 } --**************************************************************** -- Port Virtual Lane Software Congestion Table --**************************************************************** ibPmaPortVlSwCongestionTable OBJECT-TYPE SYNTAX SEQUENCE OF IbPmaPortVlSwCongestionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing PMA Port Virtual Lane Software Congestion information." ::= { ibPmaPortVlInfo 3 } ibPmaPortVlSwCongestionEntry OBJECT-TYPE SYNTAX IbPmaPortVlSwCongestionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ibPmaPortVlSwCongestionTable containing information about the software congestion per virtual lane for a particular data port." INDEX { ibPmaPortVlSwCongestionIndex } ::= { ibPmaPortVlSwCongestionTable 1 } IbPmaPortVlSwCongestionEntry ::= SEQUENCE { ibPmaPortVlSwCongestionIndex IbDataPort, ibPmaPortVlSwCongestion0 Integer32, Expires April 2003 [Page 41] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlSwCongestion1 Integer32, ibPmaPortVlSwCongestion2 Integer32, ibPmaPortVlSwCongestion3 Integer32, ibPmaPortVlSwCongestion4 Integer32, ibPmaPortVlSwCongestion5 Integer32, ibPmaPortVlSwCongestion6 Integer32, ibPmaPortVlSwCongestion7 Integer32, ibPmaPortVlSwCongestion8 Integer32, ibPmaPortVlSwCongestion9 Integer32, ibPmaPortVlSwCongestion10 Integer32, ibPmaPortVlSwCongestion11 Integer32, ibPmaPortVlSwCongestion12 Integer32, ibPmaPortVlSwCongestion13 Integer32, ibPmaPortVlSwCongestion14 Integer32, ibPmaPortVlSwCongestion15 Integer32 } ibPmaPortVlSwCongestionIndex OBJECT-TYPE SYNTAX IbDataPort MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index that identifies the InfiniBand data port. The IBA defines a range of valid data ports from 1 to N, where N can have a maximum value of 254." ::= { ibPmaPortVlSwCongestionEntry 1 } ibPmaPortVlSwCongestion0 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets to be transmitted on VL 0 for this output port that were discarded because of congestion. This includes the following reasons - Switch lifetime limit exceeded - Switch HOQ limit exceeded." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 199 SwPortVLCongestion::SWPortVLCongestion0." ::= { ibPmaPortVlSwCongestionEntry 2 } ibPmaPortVlSwCongestion1 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets to be transmitted on VL 1 for this output port that were discarded because of congestion. This includes the following reasons - Switch lifetime limit exceeded - Switch HOQ limit exceeded." Expires April 2003 [Page 42] Internet Draft IPOVERIB PMA MIB October 2002 REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 199 SwPortVLCongestion::SWPortVLCongestion1." ::= { ibPmaPortVlSwCongestionEntry 3 } ibPmaPortVlSwCongestion2 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets to be transmitted on VL 2 for this output port that were discarded because of congestion. This includes the following reasons - Switch lifetime limit exceeded - Switch HOQ limit exceeded." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 199 SwPortVLCongestion::SWPortVLCongestion2." ::= { ibPmaPortVlSwCongestionEntry 4 } ibPmaPortVlSwCongestion3 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets to be transmitted on VL 3 for this output port that were discarded because of congestion. This includes the following reasons - Switch lifetime limit exceeded - Switch HOQ limit exceeded." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 199 SwPortVLCongestion::SWPortVLCongestion3." ::= { ibPmaPortVlSwCongestionEntry 5 } ibPmaPortVlSwCongestion4 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets to be transmitted on VL 4 for this output port that were discarded because of congestion. This includes the following reasons - Switch lifetime limit exceeded - Switch HOQ limit exceeded." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 199 SwPortVLCongestion::SWPortVLCongestion4." ::= { ibPmaPortVlSwCongestionEntry 6 } Expires April 2003 [Page 43] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlSwCongestion5 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets to be transmitted on VL 5 for this output port that were discarded because of congestion. This includes the following reasons - Switch lifetime limit exceeded - Switch HOQ limit exceeded." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 199 SwPortVLCongestion::SWPortVLCongestion5." ::= { ibPmaPortVlSwCongestionEntry 7 } ibPmaPortVlSwCongestion6 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets to be transmitted on VL 6 for this output port that were discarded because of congestion. This includes the following reasons - Switch lifetime limit exceeded - Switch HOQ limit exceeded." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 199 SwPortVLCongestion::SWPortVLCongestion6." ::= { ibPmaPortVlSwCongestionEntry 8 } ibPmaPortVlSwCongestion7 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets to be transmitted on VL 7 for this output port that were discarded because of congestion. This includes the following reasons - Switch lifetime limit exceeded - Switch HOQ limit exceeded." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 199 SwPortVLCongestion::SWPortVLCongestion7." ::= { ibPmaPortVlSwCongestionEntry 9 } Expires April 2003 [Page 44] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlSwCongestion8 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets to be transmitted on VL 8 for this output port that were discarded because of congestion. This includes the following reasons - Switch lifetime limit exceeded - Switch HOQ limit exceeded." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 199 SwPortVLCongestion::SWPortVLCongestion8." ::= { ibPmaPortVlSwCongestionEntry 10 } ibPmaPortVlSwCongestion9 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets to be transmitted on VL 9 for this output port that were discarded because of congestion. This includes the following reasons - Switch lifetime limit exceeded - Switch HOQ limit exceeded." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 199 SwPortVLCongestion::SWPortVLCongestion9." ::= { ibPmaPortVlSwCongestionEntry 11 } ibPmaPortVlSwCongestion10 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets to be transmitted on VL 10 for this output port that were discarded because of congestion. This includes the following reasons - Switch lifetime limit exceeded - Switch HOQ limit exceeded." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 199 SwPortVLCongestion::SWPortVLCongestion10." ::= { ibPmaPortVlSwCongestionEntry 12 } Expires April 2003 [Page 45] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlSwCongestion11 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets to be transmitted on VL 11 for this output port that were discarded because of congestion. This includes the following reasons - Switch lifetime limit exceeded - Switch HOQ limit exceeded." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 199 SwPortVLCongestion::SWPortVLCongestion11." ::= { ibPmaPortVlSwCongestionEntry 13 } ibPmaPortVlSwCongestion12 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets to be transmitted on VL 12 for this output port that were discarded because of congestion. This includes the following reasons - Switch lifetime limit exceeded - Switch HOQ limit exceeded." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 199 SwPortVLCongestion::SWPortVLCongestion12." ::= { ibPmaPortVlSwCongestionEntry 14 } ibPmaPortVlSwCongestion13 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets to be transmitted on VL 13 for this output port that were discarded because of congestion. This includes the following reasons - Switch lifetime limit exceeded - Switch HOQ limit exceeded." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 199 SwPortVLCongestion::SWPortVLCongestion13." ::= { ibPmaPortVlSwCongestionEntry 15 } ibPmaPortVlSwCongestion14 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current Expires April 2003 [Page 46] Internet Draft IPOVERIB PMA MIB October 2002 DESCRIPTION "Total number of packets to be transmitted on VL 14 for this output port that were discarded because of congestion. This includes the following reasons - Switch lifetime limit exceeded - Switch HOQ limit exceeded." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 199 SwPortVLCongestion::SWPortVLCongestion14." ::= { ibPmaPortVlSwCongestionEntry 16 } ibPmaPortVlSwCongestion15 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets to be transmitted on VL 15 for this output port that were discarded because of congestion. This includes the following reasons - Switch lifetime limit exceeded - Switch HOQ limit exceeded." REFERENCE "InfiniBand Architecture Release 1.0.a Vol 1. Section 16.1.3.5; Table 199 SwPortVLCongestion::SWPortVLCongestion15." ::= { ibPmaPortVlSwCongestionEntry 17 } --**************************************************************** -- Module Conformance Statement -- -- DESCRIPTION: The module conformance statement includes the -- compliance statements and the units of conformance -- section. --**************************************************************** ibPmaCompliances OBJECT IDENTIFIER ::= { ibPmaConformance 1 } ibPmaGroups OBJECT IDENTIFIER ::= { ibPmaConformance 2 } --**************************************************************** -- Compliance Statements --**************************************************************** ibPmaBasicNodeCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The basic node implementation requirements for agents that support the IPOIB PMA MIB." MODULE -- this module MANDATORY-GROUPS { ibPmaPortCntrsMandatoryGroup } ::= { ibPmaCompliances 1 } Expires April 2003 [Page 47] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaFullNodeCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The full node implementation requirements for agents that support the IPOIB PMA MIB. This include all of the optional counter groups" MODULE -- this module MANDATORY-GROUPS { ibPmaPortCntrsMandatoryGroup, ibPmaPortCntrsOptionalGroup, ibPmaPortRcvErrGroup, ibPmaPortXmitDiscardGroup, ibPmaPortFlowCtlCntrsGroup, ibPmaPortOpCodeRcvCntrsGroup, ibPmaPortOpCodeVlCntrsGroup, ibPmaPortOpCodeVlDataCntrsGroup, ibPmaPortVlXmitFCUpErrGroup, ibPmaPortVlXmitWaitGroup, ibPmaPortVlSwCongestionGroup } ::= { ibPmaCompliances 2 } --**************************************************************** -- Units Of Conformance --**************************************************************** ibPmaPortCntrsMandatoryGroup OBJECT-GROUP OBJECTS { ibPmaSymbolErrCounter, ibPmaLinkErrRecoveryCntr, ibPmaLinkDownedCntr, ibPmaPortRcvErr, ibPmaPortRcvRemPhysErr, ibPmaPortRcvSwitchRelayErr, ibPmaPortXmitDiscard, ibPmaPortXmitConstraintErr, ibPmaPortRcvConstraintErr, ibPmaLocalLinkIntegrityErr, ibPmaExcessBufOverrunErr, ibPmaVl15Dropped } STATUS current DESCRIPTION "The ibPmaPortCntrsMandatoryGroup defines the MIB objects that describe the mandatory counters that must be maintained by the Performance Management Agent." ::= { ibPmaGroups 1 } Expires April 2003 [Page 48] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortCntrsOptionalGroup OBJECT-GROUP OBJECTS { ibPmaPortXmitData, ibPmaPortRcvData, ibPmaPortXmitPkts, ibPmaPortRcvPkts } STATUS current DESCRIPTION "The ibPmaPortCntrsOptionalGroup defines the MIB objects that describe the optional counters that must be maintained by the Performance Management Agent." ::= { ibPmaGroups 2 } ibPmaPortRcvErrGroup OBJECT-GROUP OBJECTS { ibPmaPortRcvErrLocalPhysErrs, ibPmaPortMalformedPacketErrs, ibPmaPortBufferOverrunErrs, ibPmaPortDLIDMappingErrs, ibPmaPortVLMappingErrs, ibPmaPortLoopingErrs } STATUS current DESCRIPTION "The ibPmaPortRcvErrGroup defines the MIB objects that describe the receive error counters for a particular port by the PMA." ::= { ibPmaGroups 3 } ibPmaPortXmitDiscardGroup OBJECT-GROUP OBJECTS { ibPmaPortInactiveDiscards, ibPmaPortNeighborMtuDiscards, ibPmaPortSwLifetimeLimitDiscards, ibPmaPortSwHoqLimitDiscards } STATUS current DESCRIPTION "The ibPmaPortXmitDiscardGroup defines the MIB objects that describe the transmit discard details for a particular port by the PMA." ::= { ibPmaGroups 4 } Expires April 2003 [Page 49] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortFlowCtlCntrsGroup OBJECT-GROUP OBJECTS { ibPmaPortFlowCtlXmitFlowPkts, ibPmaPortFlowCtlRcvFlowPkts } STATUS current DESCRIPTION "The ibPmaPortFlowCtlCntrsGroup defines the MIB objects that describe the transmit and receive flow control counters for a particular port by the PMA." ::= { ibPmaGroups 5 } ibPmaPortOpCodeRcvCntrsGroup OBJECT-GROUP OBJECTS { ibPmaPortOpCodeRcvCntrsRcvPkts, ibPmaPortOpCodeRcvCntrsRcvData } STATUS current DESCRIPTION "The ibPmaPortOpCodeRcvCntrsGroup defines the MIB objects that describe the receive counters for a particular port and op code by the PMA." ::= { ibPmaGroups 6 } ibPmaPortOpCodeVlCntrsGroup OBJECT-GROUP OBJECTS { ibPmaPortVlOpPkt0, ibPmaPortVlOpPkt1, ibPmaPortVlOpPkt2, ibPmaPortVlOpPkt3, ibPmaPortVlOpPkt4, ibPmaPortVlOpPkt5, ibPmaPortVlOpPkt6, ibPmaPortVlOpPkt7, ibPmaPortVlOpPkt8, ibPmaPortVlOpPkt9, ibPmaPortVlOpPkt10, ibPmaPortVlOpPkt11, ibPmaPortVlOpPkt12, ibPmaPortVlOpPkt13, ibPmaPortVlOpPkt14, ibPmaPortVlOpPkt15 } STATUS current DESCRIPTION "The ibPmaPortOpCodeVlCntrsGroup defines the MIB objects that describe the packet counters for a particular port, op code, and virtual lane by the PMA." ::= { ibPmaGroups 7 } Expires April 2003 [Page 50] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortOpCodeVlDataCntrsGroup OBJECT-GROUP OBJECTS { ibPmaPortVlOpData0, ibPmaPortVlOpData1, ibPmaPortVlOpData2, ibPmaPortVlOpData3, ibPmaPortVlOpData4, ibPmaPortVlOpData5, ibPmaPortVlOpData6, ibPmaPortVlOpData7, ibPmaPortVlOpData8, ibPmaPortVlOpData9, ibPmaPortVlOpData10, ibPmaPortVlOpData11, ibPmaPortVlOpData12, ibPmaPortVlOpData13, ibPmaPortVlOpData14, ibPmaPortVlOpData15 } STATUS current DESCRIPTION "The ibPmaPortOpCodeVlDataCntrsGroup defines the MIB objects that describe the octet counters for a particular port, op code, and virtual lane by the PMA." ::= { ibPmaGroups 8 } ibPmaPortVlXmitFCUpErrGroup OBJECT-GROUP OBJECTS { ibPmaPortVlXmitFCUpErr0, ibPmaPortVlXmitFCUpErr1, ibPmaPortVlXmitFCUpErr2, ibPmaPortVlXmitFCUpErr3, ibPmaPortVlXmitFCUpErr4, ibPmaPortVlXmitFCUpErr5, ibPmaPortVlXmitFCUpErr6, ibPmaPortVlXmitFCUpErr7, ibPmaPortVlXmitFCUpErr8, ibPmaPortVlXmitFCUpErr9, ibPmaPortVlXmitFCUpErr10, ibPmaPortVlXmitFCUpErr11, ibPmaPortVlXmitFCUpErr12, ibPmaPortVlXmitFCUpErr13, ibPmaPortVlXmitFCUpErr14, ibPmaPortVlXmitFCUpErr15 } STATUS current DESCRIPTION "The ibPmaPortVlXmitFCUpErrGroup defines the MIB objects that describe the transmit flow control update counters for a particular port and virtual lane by the PMA." ::= { ibPmaGroups 9 } Expires April 2003 [Page 51] Internet Draft IPOVERIB PMA MIB October 2002 ibPmaPortVlXmitWaitGroup OBJECT-GROUP OBJECTS { ibPmaPortVlXmitWait0, ibPmaPortVlXmitWait1, ibPmaPortVlXmitWait2, ibPmaPortVlXmitWait3, ibPmaPortVlXmitWait4, ibPmaPortVlXmitWait5, ibPmaPortVlXmitWait6, ibPmaPortVlXmitWait7, ibPmaPortVlXmitWait8, ibPmaPortVlXmitWait9, ibPmaPortVlXmitWait10, ibPmaPortVlXmitWait11, ibPmaPortVlXmitWait12, ibPmaPortVlXmitWait13, ibPmaPortVlXmitWait14, ibPmaPortVlXmitWait15 } STATUS current DESCRIPTION "The ibPmaPortVlXmitWaitGroup defines the MIB objects that describe the transmit wait counters for a particular port and virtual lane by the PMA." ::= { ibPmaGroups 10 } ibPmaPortVlSwCongestionGroup OBJECT-GROUP OBJECTS { ibPmaPortVlSwCongestion0, ibPmaPortVlSwCongestion1, ibPmaPortVlSwCongestion2, ibPmaPortVlSwCongestion3, ibPmaPortVlSwCongestion4, ibPmaPortVlSwCongestion5, ibPmaPortVlSwCongestion6, ibPmaPortVlSwCongestion7, ibPmaPortVlSwCongestion8, ibPmaPortVlSwCongestion9, ibPmaPortVlSwCongestion10, ibPmaPortVlSwCongestion11, ibPmaPortVlSwCongestion12, ibPmaPortVlSwCongestion13, ibPmaPortVlSwCongestion14, ibPmaPortVlSwCongestion15 } STATUS current DESCRIPTION "The ibPmaPortVlSwCongestionGroup defines the MIB objects that describe the software congestion counters for a particular port and virtual lane by the PMA." ::= { ibPmaGroups 11 } END Expires April 2003 [Page 52] Internet Draft IPOVERIB PMA MIB October 2002 6. Security Considerations SNMPv1 by itself is not a secure environment. Even if the network itself is secure (for example by using IPSec), even then, there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB. It is recommended that the implementers consider the security features as provided by the SNMPv3 framework. Specifically, the use of the User-based Security Model RFC 2574 [RFC2574] and the View- based Access Control Model RFC 2575 [RFC2575] is recommended. It is then a customer/user responsibility to ensure that the SNMP entity giving access to an instance of this MIB, is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them. 7. Intellectual Property The IETF takes no position regarding the validity or scope of any intellectual property or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; neither does it represent that it has made any effort to identify any such rights. Information on the IETF's procedures with respect to rights in standards-track and standards-related documentation can be found in BCP-11. Copies of claims of rights made available for publication and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementors or users of this specification can be obtained from the IETF Secretariat. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights which may cover technology that may be required to practice this standard. Please address the information to the IETF Executive Director. 8. References [RFC2571] Harrington, D., Presuhn, R. and B. Wijnen, "An Architecture for Describing SNMP Management Frameworks", RFC 2571, April 1999. [RFC1155] Rose, M. and K. McCloghrie, "Structure and Identification of Management Information for TCP/IP-based Internets", STD 16, RFC 1155, May 1990. Expires April 2003 [Page 53] Internet Draft IPOVERIB PMA MIB October 2002 [RFC1212] Rose, M. and K. McCloghrie, "Concise MIB Definitions", STD 16, RFC 1212, March 1991. [RFC1215] Rose, M., "A Convention for Defining Traps for use with the SNMP", RFC 1215, March 1991. [RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. [RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999. [RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999. [RFC1157] Case, J., Fedor, M., Schoffstall, M. and J. Davin, "Simple Network Management Protocol", STD 15, RFC 1157, May 1990. [RFC1901] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, "Introduction to Community-based SNMPv2", RFC 1901, January 1996. [RFC1906] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, "Transport Mappings for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1906, January 1996. [RFC2572] Case, J., Harrington D., Presuhn R. and B. Wijnen, "Message Processing and Dispatching for the Simple Network Management Protocol (SNMP)", RFC 2572, April 1999. [RFC2574] Blumenthal, U. and B. Wijnen, "User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)", RFC 2574, April 1999. [RFC1905] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, "Protocol Operations for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1905, January 1996. [RFC2573] Levi, D., Meyer, P. and B. Stewart, "SNMPv3 Applications", RFC 2573, April 1999. [RFC2575] Wijnen, B., Presuhn, R. and K. McCloghrie, "View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP)", RFC 2575, April 1999. [RFC2570] Case, J., Mundy, R., Partain, D. and B. Stewart, "Introduction to Version 3 of the Internet-standard Network Management Framework", RFC 2570, April 1999. Expires April 2003 [Page 54] Internet Draft IPOVERIB PMA MIB October 2002 [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [IBTAArch] Infiniband Trade Association, Infiniband(TM) Architecture Specification Vol 1 & 2 Release 1.0a, 1999, 2000. [IBIF] Anderson, B., and S. Harnedy, "Definition of Managed Objects Infiniband Interface Types" , June 2002. [IBTC] Harnedy, S., "Definition of Textual Conventions and OBJECT- IDENTITIES for IP Over InfiniBand (IPOVERIB) Management" . May 2002. 9. Author's Address Sean Harnedy InfiniSwitch Corporation 134 Flanders Road Phone: 1-508-599-6388 Westborough, MA 01581 Email: sharnedy@infiniswitch.com USA Expires April 2003 [Page 55]