NTP H. Gerstung Internet-Draft Meinberg Expires: September 5, 2007 March 4, 2007 Definitions of Managed Objects for Network Time Protocol Version 4 (NTPv4) draft-ietf-ntp-ntpv4-mib-01 Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on September 5, 2007. Copyright Notice Copyright (C) The IETF Trust (2007). Abstract The Network Time Protocol (NTP) is used in networks of all types and sizes for time synchronization of servers, workstations and other networked equipment. As time synchronization is more and more a mission critical service, standardized means for monitoring and management of this subsystem of a networked host are required to allow operators of such a service to setup a monitoring system that is platform- and vendor-independant. This RFC draft provides a standardized collection of data objects for monitoring the NTP Gerstung Expires September 5, 2007 [Page 1] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 service of such a network participant and it is part of the NTP Version 4 standardization effort. Table of Contents 1. The Internet-Standard Management Framework . . . . . . . . . . 3 2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. Technical Description . . . . . . . . . . . . . . . . . . . . 3 4. MIB Definition . . . . . . . . . . . . . . . . . . . . . . . . 4 5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 20 6. Security Considerations . . . . . . . . . . . . . . . . . . . 20 7. References . . . . . . . . . . . . . . . . . . . . . . . . . . 20 7.1. Normative References . . . . . . . . . . . . . . . . . . . 20 7.2. Informative References . . . . . . . . . . . . . . . . . . 21 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 21 Intellectual Property and Copyright Statements . . . . . . . . . . 22 Gerstung Expires September 5, 2007 [Page 2] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 1. The Internet-Standard Management Framework For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC3410 [4]. Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in RFC2578 [1], RFC2579 [2] and RFC2580 [3]. 2. Introduction The NTPv4 MIB Module is designed to allow SNMP to be used to monitor and manage local NTP service instances. It provides a collection of data objects that can be queried using the SNMP protocol and represent the current status of the NTP service instance. This includes general information about the NTP service instance itself (vendor, product, version) as well as connectivity to upstream NTP servers used as sources of reference time and to hardware reference clocks like radio clocks. The most important values are included in order to be able to detect failures before they can have an impact on the overall time synchronization status of the network. There are also a collection of notification objects to inform about state changes in the NTP service. There are objects to control these notifications as well. 3. Technical Description The NTPv4 MIB Module is divided into sections for general server information, current NTP service status, status information of all mobilized associations (e.g. unicast upstream time servers, multicast or broadcast time references and hardware clocks), NTP service control objects, NTP objects used only for notifications, as well as SNMP notification definitions for core events. The general server information section contains static information and can be queried to identify which NTP service implementation is running on a host. This includes the vendor and product name of the running NTP software as well as version information, hardware/os platform identity and the time resolution of the underlying OS. Section 2 (current NTP status) includes data objects that represent Gerstung Expires September 5, 2007 [Page 3] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 the current operational status of the NTP service instance. The third section contains data objects that represent the set of time references ("associations") the NTP instance is currently working with. The fourth section contains objects that can be used to control the NTP service. The currently defined objects control how often the heartbeat interval notification is sent out and which notifications are enabled. The fifth section contains objects that are only used as varbinds in notifications. There is currently only one object in this section--a message that adds a clear text event message to notifications. Certain important events can occur while the NTP instance is running. The sixth section defines SNMP notifications for a collection of the most important ones ("core events") and additionally provides a heartbeat notification as well as a test notification to allow management systems to test the reception of NTP related notifications as well as enable heartbeat-based monitoring systems to assure that the NTP service is still up and running. 4. MIB Definition -- ************************************************************************** -- --$Id: draft-ietf-ntp-ntpv4-mib-01.xml 1.2 2007/03/05 07:52:46Z heiko TRASH $ --$Name: $ -- -- The Network Time Protocol Version 4 -- Management Information Base (MIB) -- -- Author: Heiko Gerstung (heiko.gerstung@meinberg.de) -- for the Internet Engineering Task Force (IETF) -- NTP Working Group (ntpwg) -- -- -- ************************************************************************** -- -- $Log: draft-ietf-ntp-ntpv4-mib-01.xml $ -- Revision 1.2 2007/03/05 07:52:46Z heiko -- - registered as -01 in revision control -- Revision 1.1 2007/03/05 07:52:17Z heiko -- Initial revision -- Revision 1.10 2007/03/05 07:49:21Z heiko -- - changed document date Gerstung Expires September 5, 2007 [Page 4] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 -- Revision 1.9 2007/03/04 06:59:44Z chelliot -- MIB: -- - Added time objects, comments, changed notifications -- - Changed server to service -- Revision 1.8 2006/10/23 03:37:44Z chelliot -- MIB: -- - Changed various object types, added notification control object -- Revision 1.7 2006/06/16 07:13:50Z heiko -- XML/RFC: -- - added/changed comments about the to-be-done IANA SMI assignment -- Revision 1.6 2006/06/16 07:04:43Z heiko -- RFC/XML: -- - phone number corrected -- - removed unused references -- MIB: -- - added ntpSrvTimePrecision -- - changed INTEGER objects to Integer32 -- - changed default value for ntpSrvStatusStratum from 99 to 16 -- - changed default value for ntpSrvStatusActiveRefclockId from 99 to 0 -- - changed object names to ntpSrvStatusActiveRefSourceName -- (from ntpSrvStatusActiveRefclockName) and to -- ntpSrvStatusNumberOfRefSources (from ntpSrvStatusNumberOfRefclocks) -- - removed ntpSrvStatusAuthKeyId object -- - added ntpSrvStatusDispersion to provide the current root dispersion -- - major rework of section 3 (Status of associations) to compile cleanly -- including: -- - added dispersion to the association dataset -- - renaming of objects -- - added an index to the association table -- - formal changes -- - traps are now reverse mappable -- - traps are now define with payload where applicable -- - added compliance statements -- Revision 1.5 2006/02/27 08:28:16Z heiko -- - changed to RFC format and added header as well as -- introduction and technical description -- - added other necessary RFC components (copyright statement etc.) -- Revision 1.4 2006/02/27 07:06:49Z heiko -- - removed all objects with data type REAL -- - everything that needs to be floating point is now defined as -- DisplayString -- Revision 1.2 2006/01/23 08:58:11Z heiko -- - changed the datatype of offset, jitter and delay objects from Integer32 -- to REAL -- -- ************************************************************************** NTPv4-MIB DEFINITIONS ::= BEGIN Gerstung Expires September 5, 2007 [Page 5] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 IMPORTS MODULE-IDENTITY, OBJECT-TYPE , mib-2, Integer32, NOTIFICATION-TYPE, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF DisplayString FROM SNMPv2-TC InetAddressType, InetAddress FROM INET-ADDRESS-MIB; ntpSnmpMIB MODULE-IDENTITY LAST-UPDATED "200703040000Z" -- March 4, 2007 ORGANIZATION "The IETF NTP Working Group (ntpwg)" CONTACT-INFO " WG Email: Subscribe: Editor 1 name Title Employeer Address Phone email Editor 2 name..." DESCRIPTION "The Management Information Base for NTP time services." REVISION "200703040000Z" DESCRIPTION "More MIB review modifications." REVISION "200610230000Z" DESCRIPTION "Modifications from MIB review." REVISION "200606190000Z" DESCRIPTION "First Draft Version" REVISION "200512190000Z" DESCRIPTION "revised edition (added traps and stuff)" REVISION "200511160000Z" DESCRIPTION "Initial draft" ::= { mib-2 XXX } ntpSnmpMIBObjects OBJECT IDENTIFIER ::= { ntpSnmpMIB 1 } Gerstung Expires September 5, 2007 [Page 6] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 -- MIB contains 4 groups ntpSrvInfo OBJECT IDENTIFIER ::= { ntpSnmpMIBObjects 1 } ntpSrvStatus OBJECT IDENTIFIER ::= { ntpSnmpMIBObjects 2 } ntpAssociation OBJECT IDENTIFIER ::= { ntpSnmpMIBObjects 3 } ntpSrvControl OBJECT IDENTIFIER ::= { ntpSnmpMIBObjects 4 } ntpSrvNotifObjects OBJECT IDENTIFIER ::= { ntpSnmpMIBObjects 5 } ntpSrvNotifPrefix OBJECT IDENTIFIER ::= { ntpSnmpMIBObjects 6 } -- -- Section 1: General Service information objects -- (relatively static information) -- ntpSrvSoftwareName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The product name of the installed NTP version." -- the product name of the running ntp implementation, e.g. "ntpd" ::= { ntpSrvInfo 1 } ntpSrvSoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The software version of the installed NTP implementation." -- full version string, e.g. "ntpd-4.2.0b@1.1433 ..." ::= { ntpSrvInfo 2 } ntpSrvSoftwareVersionVal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Software version of installed NTP as an unsigned integer value." -- e.g. if version string is "4.2.0b" this could be translated into 4202 -- could be useful to find out if version of service on a is newer or older -- than version of the service on b (without too much string parsing trouble) ::= { ntpSrvInfo 3 } ntpSrvSoftwareVendor OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION Gerstung Expires September 5, 2007 [Page 7] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 "The vendor/author of the installed NTP version." ::= { ntpSrvInfo 4 } ntpSrvSystemType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "General hardware/os platform information." -- e.g. "Linux 2.6.12 / x86" -- freely configurable, default is OS Version / Hardware platform ::= { ntpSrvInfo 5 } ntpSrvTimeResolution OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A string describing the time resolution of the running NTP implementation." -- e.g. "100 ns" -- depends on the NTP implementation and the underlying OS. The current -- resolution should be used, so if the OS only supports 10ms and ntpd is -- capable of 1ns, the 10ms should be advertised ::= { ntpSrvInfo 6 } ntpSrvTimeResolutionVal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time resolution in integer format." -- ntpSrvTimeResolution in Integer format -- shows the resolution based on 1 second, e.g. "1ms" translates to 1000 ::= { ntpSrvInfo 7 } ntpSrvTimePrecision OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A string describing the precision with which the NTP service implementation/OS manages its time base." -- e.g. "-18" means 2^-18 = 0.000003814697265625 seconds -- "-5" means 2^-5 = 0.03125 seconds -- depends on the NTP implementation and the underlying OS. ::= { ntpSrvInfo 8 } Gerstung Expires September 5, 2007 [Page 8] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 ntpSrvTimePrecisionVal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The service's precision in integer format." -- ntpSrvTimePrecision in signed Integer format -- shows the precision. A value of -5 would mean 2^-5 = 31.25 ms ::= { ntpSrvInfo 9 } ntpSrvTimeDistance OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The distance from this NTP instance to the root time reference (stratum 0) source." -- including the unit -- e.g. "13.243 ms" ::= { ntpSrvInfo 10 } -- -- Section 2: Current NTP status (dynamic information) -- ntpSrvStatusCurrentState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The actual status of NTP as a string" --- possible strings: --- "not running" : NTP is not running --- "not synchronized" : NTP is not synchronized to any time source --- (stratum = 16) --- "none configured" : NTP is not synchronized and does not have a server --- configured --- (stratum = 16) --- "sync to local" : NTP is synchronized to own local clock --- (degraded reliability) --- "sync to refclock" : NTP is synchronized to a local hardware refclock --- (e.g. GPS) --- "sync to remote server" : NTP is synchronized to a remote NTP server --- ("upstream" server) --- "unknown" : The state of NTP is unknown. ::= { ntpSrvStatus 1 } ntpSrvStatusCurrentStateVal OBJECT-TYPE Gerstung Expires September 5, 2007 [Page 9] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 SYNTAX INTEGER { notRunning(1), notSynchronized(2), noneConfigured(3), syncToLocal(4), syncToRefclock(5), syncToRemoteServer(6), unknown(99) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the NTP as integer value." -- see ntpSrvStatusCurrentState DEFVAL { 99 } ::= { ntpSrvStatus 2 } ntpSrvStatusStratum OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The NTP service's own stratum value." -- should be stratum of syspeer + 1 (or 16 if no syspeer) DEFVAL { 16 } ::= { ntpSrvStatus 3 } ntpSrvStatusActiveRefSourceId OBJECT-TYPE SYNTAX Unsigned32 ( 0..99999 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The association ID of the current syspeer." DEFVAL { 0 } ::= { ntpSrvStatus 4 } ntpSrvStatusActiveRefSourceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The hostname/descriptive name of the current reference source selected as syspeer." -- e.g. "ntp1.ptb.de" or "GPS" or "DCFi" ... -- maybe something like "RefClk(8)" = "hardware clock using driver 8" -- would be nice ::= { ntpSrvStatus 5 } Gerstung Expires September 5, 2007 [Page 10] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 ntpSrvStatusActiveOffset OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Time offset to the current selected reference time source as a string." -- including unit, e.g. "0.032 ms" or "1.232 s" ::= { ntpSrvStatus 6 } ntpSrvStatusNumberOfRefSources OBJECT-TYPE SYNTAX Unsigned32 (0..99) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reference sources configured for NTP." DEFVAL { 0 } ::= { ntpSrvStatus 7 } ntpSrvStatusDispersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The root dispersion of the running NTP instance." -- e.g. "6.927" DEFVAL { "n/a" } ::= { ntpSrvStatus 8 } ntpSrvStatusServiceUptime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The uptime of the NTP service in seconds." -- time since ntpd was (re-)started (not sysUptime!) DEFVAL { 0 } ::= { ntpSrvStatus 9 } ntpSrvStatusTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0 | 16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The current NTP time on the device, in 128-bit NTP date format. Ref: draft-ietf-ntp-ntpv4-proto-04, section 5: It includes a 64-bit signed seconds field Gerstung Expires September 5, 2007 [Page 11] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 spanning 584 billion years and a 64-bit fraction field resolving .05 attosecond (i.e. 0.5e-18). For convenience in mapping between formats, the seconds field is divided into a 32-bit era field and a 32-bit timestamp field. If time is not syncronized this field shall be a zero-length string. This object can be used to timestamp events on this node and allow a management station to coorelate different time objects. For example, a management station could query this object and sysUpTime in the same operation to be able to relate sysUpTime to NTP time. This object is not to be used to set the time of the node querying this object. NTP should be used for this--or at least SNTP." ::= { ntpSrvStatus 10 } -- ntpSrvStatusTimeVal OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The current NTP time on the device, in 64-bit -- NTP time format. Ref: draft-ietf-ntp-ntpv4-proto-04, -- section 5: -- It includes a 32-bit unsigned seconds field spanning -- 136 years and a 32-bit fraction field resolving 232 -- picoseconds." -- ::= { ntpSrvStatus 10 } -- -- ntpSrvStatusEra OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The current Era." -- ::= { ntpSrvStatus 11 } -- -- ntpSrvStatusTimeDiscontinuityTimer OBJECT-TYPE -- SYNTAX TimeTicks -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The value of sysUpTime when a discontinuity event Gerstung Expires September 5, 2007 [Page 12] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 -- happened that affected the value of ntpSrvStatusTimeVal." -- ::= { ntpSrvStatus 12 } -- -- ntpSrvStatusTimeDiscontinuityOffset OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Latest time adjustment offset at the time of the last -- discontinuity event for ntpSrvStatusTimeVal." -- ::= { ntpSrvStatus 13 } -- -- Section 3: The status of all currently mobilized associations -- ntpAssociationTable OBJECT-TYPE SYNTAX SEQUENCE OF NtpAssociationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of currently mobilized associations." ::= { ntpAssociation 1 } ntpAssociationEntry OBJECT-TYPE SYNTAX NtpAssociationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry of currently mobilized associations." INDEX { ntpAssocId } ::= { ntpAssociationTable 1 } NtpAssociationEntry ::= SEQUENCE { ntpAssocId Unsigned32, ntpAssocName DisplayString, ntpAssocRefId DisplayString, ntpAssocAddressType InetAddressType, ntpAssocAddress InetAddress, ntpAssocOffset DisplayString, ntpAssocStatusJitter DisplayString, ntpAssocStatusDelay DisplayString, ntpAssocStatusDispersion DisplayString } ntpAssocId OBJECT-TYPE SYNTAX Unsigned32 ( 1..99999 ) Gerstung Expires September 5, 2007 [Page 13] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The association ID. This is an internal, unique ID." ::= { ntpAssociationEntry 1 } ntpAssocName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The hostname or other descriptive name for the association." ::= { ntpAssociationEntry 2 } ntpAssocRefId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The refclock driver ID, if available." -- a refclock driver ID like "127.127.1.0" for non uni/multi/broadcast -- associations ::= { ntpAssociationEntry 3 } ntpAssocAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of address of the association." -- contains the type of address for uni/multi/broadcast associations ::= { ntpAssociationEntry 4 } ntpAssocAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address (IPv4 or IPv6) of the association." -- contains IP address of uni/multi/broadcast associations ::= { ntpAssociationEntry 5 } ntpAssocOffset OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time offset to the association as a string." Gerstung Expires September 5, 2007 [Page 14] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 -- including unit, e.g. "0.032 ms" or "1.232 s" ::= { ntpAssociationEntry 6 } ntpAssocStatusJitter OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The jitter in miliseconds as a string." ::= { ntpAssociationEntry 7 } ntpAssocStatusDelay OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The network delay in miliseconds as a string." ::= { ntpAssociationEntry 8 } ntpAssocStatusDispersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The root dispersion of the association." -- e.g. "6.927" ::= { ntpAssociationEntry 9 } -- -- Section 4: Control objects -- ntpSrvHeartbeatInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The interval at which the ntpSrvNotifHeartbeat notification should be sent, in seconds. If set to 0 and the srvNotifHeartbeat bit in ntpSrvNotifBits is 1 then ntpSrvNotifHeartbeat is sent once." DEFVAL { 60 } ::= { ntpSrvControl 1 } ntpSrvNotifBits OBJECT-TYPE SYNTAX BITS { notUsed(0), -- Used to sync up bit and notification -- indices srvNotifNotSync(1), Gerstung Expires September 5, 2007 [Page 15] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 srvNotifServiceStarted(2), srvNotifServiceStopped(3), srvNotifStratumChange(4), srvNotifSyspeerChanged(5), srvNotifAddAssociation(6), srvNotifRemoveAssociation(7), srvNotifConfigChanged(8), srvNotifLeapSecondAnnounced(9), srvNotifHeartbeat(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "A bit for each notification. A 1 for a particular bit enables that particular notification, a 0 disables it." ::= { ntpSrvControl 2 } -- -- Section 5: Notification objects -- ntpSrvNotifMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Used as a payload object for all notifications. Holds a clear text event message." DEFVAL { "no event" } ::= { ntpSrvNotifObjects 1 } -- -- Service SNMP notification definitions -- ntpSrvNotifications OBJECT IDENTIFIER ::= { ntpSrvNotifPrefix 0 } ntpSrvNotifNotInSync NOTIFICATION-TYPE OBJECTS { ntpSrvStatusCurrentStateVal } STATUS current DESCRIPTION "The notification to be sent when the NTP service transistions to not synchronised." ::= { ntpSrvNotifications 1 } ntpSrvNotifServiceStarted NOTIFICATION-TYPE OBJECTS { ntpSrvNotifMessage } STATUS current Gerstung Expires September 5, 2007 [Page 16] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 DESCRIPTION "The notification to be sent when NTP starts up." ::= { ntpSrvNotifications 2 } ntpSrvNotifServiceStopped NOTIFICATION-TYPE OBJECTS { ntpSrvNotifMessage } STATUS current DESCRIPTION "The notification to be sent when NTP stops." ::= { ntpSrvNotifications 3 } ntpSrvNotifStratumChange NOTIFICATION-TYPE OBJECTS { ntpSrvStatusTime, ntpSrvStatusStratum, ntpSrvNotifMessage } STATUS current DESCRIPTION "The notification to be sent when stratum level of NTP changes." ::= { ntpSrvNotifications 4 } ntpSrvNotifSyspeerChanged NOTIFICATION-TYPE OBJECTS { ntpSrvStatusTime, ntpSrvStatusActiveRefSourceId, ntpSrvNotifMessage } STATUS current DESCRIPTION "The notification to be sent when a (new) syspeer has been selected." ::= { ntpSrvNotifications 5 } ntpSrvNotifAddAssociation NOTIFICATION-TYPE OBJECTS { ntpSrvStatusTime, ntpAssocName, ntpSrvNotifMessage } STATUS current DESCRIPTION "The notification to be sent when a new association is mobilized." ::= { ntpSrvNotifications 6 } ntpSrvNotifRemoveAssociation NOTIFICATION-TYPE OBJECTS { ntpSrvStatusTime, ntpAssocName, ntpSrvNotifMessage } STATUS current DESCRIPTION "The notification to be sent when an association is demobilized." ::= { ntpSrvNotifications 7 } ntpSrvNotifConfigChanged NOTIFICATION-TYPE OBJECTS { ntpSrvStatusTime, ntpSrvNotifMessage } STATUS current DESCRIPTION "The notification to be sent when the NTP configuration has changed." -- e.g. when the system connected to the internet and was assigned -- a new IP address by the ISPs DHCP server Gerstung Expires September 5, 2007 [Page 17] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 ::= { ntpSrvNotifications 8 } ntpSrvNotifLeapSecondAnnounced NOTIFICATION-TYPE OBJECTS { ntpSrvStatusTime, ntpSrvNotifMessage } STATUS current DESCRIPTION "The notification to be sent when a leap second has been announced." ::= { ntpSrvNotifications 9 } ntpSrvNotifHeartbeat NOTIFICATION-TYPE OBJECTS { ntpSrvStatusTime, ntpSrvStatusCurrentStateVal, ntpSrvHeartbeatInterval, ntpSrvNotifMessage } STATUS current DESCRIPTION "The notification to be sent periodically (as defined by ntpSrvHeartbeatInterval) to indicate that the NTP service is still alive." ::= { ntpSrvNotifications 10 } -- -- Conformance/Compliance statements -- ntpSrvConformance OBJECT IDENTIFIER ::= { ntpSnmpMIB 6 } ntpSrvCompliances OBJECT IDENTIFIER ::= { ntpSrvConformance 1 } ntpSrvGroups OBJECT IDENTIFIER ::= { ntpSrvConformance 2 } ntpSrvCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the NTP Service MIB" MODULE -- this module MANDATORY-GROUPS { ntpSrvObjectsGroup, ntpSrvNotifPrefixGroup } ::= { ntpSrvCompliances 1 } ntpSrvObjectsGroup OBJECT-GROUP OBJECTS { ntpSrvSoftwareName, ntpSrvSoftwareVersion, ntpSrvSoftwareVersionVal, ntpSrvSoftwareVendor, ntpSrvSystemType, ntpSrvTimeResolution, Gerstung Expires September 5, 2007 [Page 18] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 ntpSrvTimeResolutionVal, ntpSrvTimePrecision, ntpSrvTimePrecisionVal, ntpSrvTimeDistance, ntpSrvStatusCurrentState, ntpSrvStatusCurrentStateVal, ntpSrvStatusStratum, ntpSrvStatusActiveRefSourceId, ntpSrvStatusActiveRefSourceName, ntpSrvStatusActiveOffset, ntpSrvStatusNumberOfRefSources, ntpSrvStatusDispersion, ntpSrvStatusServiceUptime, ntpSrvStatusTime, ntpAssocName, ntpAssocRefId, ntpAssocAddressType, ntpAssocAddress, ntpAssocOffset, ntpAssocStatusJitter, ntpAssocStatusDelay, ntpAssocStatusDispersion, ntpSrvHeartbeatInterval, ntpSrvNotifBits, ntpSrvNotifMessage } STATUS current DESCRIPTION "The collection of objects for the NTP Service MIB" ::= { ntpSrvGroups 1 } ntpSrvNotifPrefixGroup NOTIFICATION-GROUP NOTIFICATIONS { ntpSrvNotifNotInSync, ntpSrvNotifServiceStarted, ntpSrvNotifServiceStopped, ntpSrvNotifStratumChange, ntpSrvNotifSyspeerChanged, ntpSrvNotifAddAssociation, ntpSrvNotifRemoveAssociation, ntpSrvNotifConfigChanged, ntpSrvNotifLeapSecondAnnounced, ntpSrvNotifHeartbeat } STATUS current DESCRIPTION "The collection of notifications for the NTP Service MIB" ::= { ntpSrvGroups 2 } Gerstung Expires September 5, 2007 [Page 19] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 END 5. IANA Considerations The MIB module in this document uses the following IANA-assigned OBJECT IDENTIFIER values recorded in the SMI Numbers registry: Descriptor OBJECT IDENTIFIER value ---------- ----------------------- ntpSnmp { mib-2 XXX } RFC Ed. : the IANA is requested to assign a value for "XXX" under the 'mib-2' subtree and to record the assignment in the SMI Numbers registry. When the assignment has been made, the RFC Editor is asked to replace "XXX" (here and in the MIB module) with the assigned value and to remove this note. 6. Security Considerations All data objects in this MIB are read-only and therefore security is managed by the implementation of the SNMP agent providing the data objects in this MIB. The general access management methods used for SNMP agents apply. 7. References 7.1. Normative References [1] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. [2] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999. [3] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999. Gerstung Expires September 5, 2007 [Page 20] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 7.2. Informative References [4] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction and Applicability Statements for Internet-Standard Management Framework", RFC 3410, December 2002. Author's Address Heiko Gerstung Meinberg Funkuhren Gmbh & Co. KG Auf der Landwehr 22 Bad Pyrmont 31812 Germany Phone: +49 5281 9309 25 Email: heiko.gerstung@meinberg.de Gerstung Expires September 5, 2007 [Page 21] Internet-Draft Definitions of Managed Objects for NTPv4 March 2007 Full Copyright Statement Copyright (C) The IETF Trust (2007). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Acknowledgment Funding for the RFC Editor function is provided by the IETF Administrative Support Activity (IASA). Gerstung Expires September 5, 2007 [Page 22]