SIP M. Munakata Internet-Draft S. Schubert Intended status: Informational T. Ohba Expires: January 15, 2009 NTT July 14, 2008 UA-Driven Privacy Mechanism for SIP draft-ietf-sip-ua-privacy-02 Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on January 15, 2009. Abstract This document defines a best current practice for a user agent to generate an anonymous SIP message by utilizing mechanisms such as GRUU and TURN without the need for a privacy service defined in RFC 3323. Munakata, et al. Expires January 15, 2009 [Page 1] Internet-Draft UA-Driven Privacy Mechanism for SIP July 2008 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. Concept of Privacy . . . . . . . . . . . . . . . . . . . . . . 3 4. Treatment of Privacy-Sensitive Information . . . . . . . . . . 4 4.1. Obtaining Functional Anonymous URI Using GRUU Mechanism . 4 4.2. Obtaining Functional Anonymous IP Address Using TURN Mechanism . . . . . . . . . . . . . . . . . . . . . . . . 5 5. User Agent Behavior . . . . . . . . . . . . . . . . . . . . . 5 5.1. Essential Privacy-Sensitive Information . . . . . . . . . 5 5.1.1. Contact . . . . . . . . . . . . . . . . . . . . . . . 5 5.1.2. From . . . . . . . . . . . . . . . . . . . . . . . . . 6 5.1.3. Via . . . . . . . . . . . . . . . . . . . . . . . . . 7 5.1.4. IP addresses in SDP . . . . . . . . . . . . . . . . . 7 5.2. Non-Essential Privacy-Sensitive Information . . . . . . . 7 5.2.1. Host Names in Other SIP Headers . . . . . . . . . . . 7 5.2.2. Optional SIP Headers . . . . . . . . . . . . . . . . . 7 6. Security Considerations . . . . . . . . . . . . . . . . . . . 8 7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 8 8. References . . . . . . . . . . . . . . . . . . . . . . . . . . 8 8.1. Normative References . . . . . . . . . . . . . . . . . . . 8 8.2. Informative References . . . . . . . . . . . . . . . . . . 9 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 9 Intellectual Property and Copyright Statements . . . . . . . . . . 10 Munakata, et al. Expires January 15, 2009 [Page 2] Internet-Draft UA-Driven Privacy Mechanism for SIP July 2008 1. Introduction [RFC3323] defines a privacy mechanism for the Session Initiation Protocol (SIP) [RFC3261], based on techniques available at the time of its publication. This mechanism relies on the use of a separate privacy service to remove sensitive information from SIP messages sent by a user agent before forwarding those messages to the final destination. Since then, numerous SIP extensions have been proposed and standardized. Some of those enable a user agent to withhold its user's identity and related information without the need for privacy services, which was not possible when RFC 3323 was defined. This document defines a best current practice in which a user agent controls all the privacy functions on its own utilizing SIP extensions such as GRUU (Globally Routable User Agent URIs) [I-D.ietf-sip-gruu] and TURN (Traversal Using Relay NAT) [I-D.ietf-behave-turn]. 2. Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. privacy-sensitive information: The information that identifies a user who sends the SIP message, as well as the supplementary information that can be used to guess the user's identity. 3. Concept of Privacy The concept of privacy in this document is the act of concealing identity of a user and supplementary information. The scope of this document is to withhold the privacy-sensitive information of the user who sends the SIP message from other users and intermediaries handling the message. The protection of network privacy (e.g., topology hiding) is outside the scope of this document. Privacy-sensitive information includes display-name and URI (Uniform Resource Identifier) in a From header that can reveal the user's name and affiliation (e.g., company name), contact information in a Contact header that is used to communicate with the user agent, IP addresses in Via header and SDP (Session Description Protocol) [RFC4566] that tell the location of a user agent. A host name that appears in headers such as Call-ID is also regarded as privacy- sensitive information because it may reveal the user's domain name. Munakata, et al. Expires January 15, 2009 [Page 3] Internet-Draft UA-Driven Privacy Mechanism for SIP July 2008 4. Treatment of Privacy-Sensitive Information The two pieces of information that a user agent needs to obscure while sustaining its purpose and functionality are the URI and IP address used for establishing a media/signaling session. Essential privacy-sensitive information in a UA-generated SIP message includes display-names (in From and Contact), as well as URIs (in From and Contact) and IP addresses (in Contact, Via, and SDP). Among these, URIs and IP addresses in Contact, Via, and SDP must be functional even when they are anonymized. With the use of GRUU [I-D.ietf-sip-gruu] and TURN [I-D.ietf-behave-turn], a user agent can obtain URI and IP address for media and signaling that are functional yet anonymous, and do not identify the user agent nor the user. Instructions on how to obtain a functional anonymous URI and IP address are given in Section 4.1 and 4.2, respectively. Host names should be concealed because the user's identity may be guessed from them but they are not always regarded as essential privacy-sensitive information. In addition, a user agent should be careful not to include any information that identifies the user in optional SIP headers such as Subject and User-Agent. 4.1. Obtaining Functional Anonymous URI Using GRUU Mechanism A user agent wanting to obtain functional anonymous URI MUST support and SHOULD utilize the GRUU mechanism unless the user agent obtains functional anonymous URI through other means outside the scope of this document. By sending a REGISTER request requesting GRUU, the user agent can obtain an anonymous URI, which can later be used for Contact header. The detailed process on how a user agent obtains a GRUU is described in [I-D.ietf-sip-gruu]. If the Registrar supports the GRUU and returns a REGISTER response, the user agent SHOULD search within the REGISTER response for a "temp-gruu" URI parameter, which provides the desired privacy property. If the "temp-gruu" URI parameter and value exist within the REGISTER response, the user agent SHOULD use the value of the "temp-gruu" as an anonymous URI representing the user agent. This URI SHOULD be used for Contact header. Munakata, et al. Expires January 15, 2009 [Page 4] Internet-Draft UA-Driven Privacy Mechanism for SIP July 2008 If there is no "temp-gruu" URI parameter in the 200 response to the REGISTER request, a user agent SHOULD NOT proceed with its anonymization process, unless something equivalent to "temp-gruu" is provided through some administrative means. It is RECOMMENDED that user agent consult the user before sending a request without a functional anonymous URI when privacy is requested from the user. 4.2. Obtaining Functional Anonymous IP Address Using TURN Mechanism It is assumed that a user agent is either manually or automatically configured through means such as a configuration framework [I-D.ietf-sipping-config-framework] with the address of one or more STUN (Session Traversal Utilities for NAT) [I-D.ietf-behave-turn]relay servers. Anonymous IP addresses are needed in two places to maintain privacy, one to be used in signaling such as in a Via header, another to be used in SDP for media. A user agent that is not provided with a functional anonymous IP address through some administrative means, MUST obtain a relayed address if anonymity is desired (IP address of the media relay) for use in SDP and in Via header. Such IP address is to be derived from a STUN relay server through TURN mechanism, which allows a STUN server to act as a media relay. 5. User Agent Behavior This section describes how to generate an anonymous SIP message at a user agent. A user agent fully compliant with this document MUST obscure or conceal all the essential UA-inserted privacy-sensitive information in SIP requests and responses as shown in Section 5.1 when user privacy is requested. In addition, the user agent SHOULD conceal the non-essential privacy-sensitive information as shown in Section 5.2. 5.1. Essential Privacy-Sensitive Information 5.1.1. Contact Without privacy considerations, this field contains a URI or an IP address used to reach the user agent for mid-dialog requests and possibly out-of-dialog requests, such as REFER [RFC3515]. The Contact header can also contain a display-name. Since the Contact Munakata, et al. Expires January 15, 2009 [Page 5] Internet-Draft UA-Driven Privacy Mechanism for SIP July 2008 header is essential for routing further requests to the user agent, it must include a functional URI of IP address even when it is anonymized. A user agent generating an anonymous SIP message supporting this specification MUST anonymize a Contact header using an anonymous URI ("temp-gruu") through GRUU mechanism or an anonymous IP address through TURN mechanism unless an equivalent functional anonymous URI or IP address is provided by some other means. Refer to Section 4.1 for details on how to obtain an anonymous URI through GRUU, and refer to Section 4.2 for details on how to obtain an IP address through TURN. A display-name in a Contact header MUST be omitted or "Anonymous". 5.1.2. From Without privacy considerations, this field contains the identity of the user, such as display-name and URI. RFCs 3261 and 3323 recommend to set "sip:anonymous@anonymous.invalid" as a SIP URI in a From header when user privacy is requested. This raises issues, when the mechanism of SIP-Identity [RFC4474] is applied to the message because the SIP-Identity requires an actual domain name in a From header. A user agent generating an anonymous SIP message supporting this specification MUST anonymize a From header in an either way described below. A user agent SHOULD anonymize a From header using an anonymous display-name and an anonymous URI following the procedure noted in section 4.1.1.3 of RFC 3261 unless it is aware that SIP-Identity mechanism will be applied to the request. The recommended form of the From header is: From: "Anonymous" ;tag=1928301774 If a user agent is aware that the SIP-Identity mechanism will be applied to the request, it SHOULD include valid hostname instead of "anonymous.invalid" for a URI in a From header as follows. From: "Anonymous" ;tag=1928301774 Munakata, et al. Expires January 15, 2009 [Page 6] Internet-Draft UA-Driven Privacy Mechanism for SIP July 2008 5.1.3. Via Without privacy considerations, the bottommost Via header added by a user agent contains the IP address and port or hostname that are used to reach the user agent for responses. A user agent generating an anonymous SIP message supporting this specification MUST anonymize an IP address in a Via header, if present, using an anonymous IP address through TURN mechanism unless an equivalent functional anonymous IP address is provided by some other means. Refer to Section 4.2 for details on how to obtain an IP address through TURN. Via header SHOULD NOT include a host name, but it is not essential. 5.1.4. IP addresses in SDP A user agent generating an anonymous SIP message supporting this specification MUST anonymize IP addresses in SDP, if present, using an anonymous IP address through TURN mechanism unless an equivalent functional anonymous IP address is provided by some other means. Refer to Section 4.2 for details on how to obtain an IP address through TURN. 5.2. Non-Essential Privacy-Sensitive Information 5.2.1. Host Names in Other SIP Headers A user agent generating an anonymous SIP message supporting this specification SHOULD conceal host names in any SIP headers, such as Call-ID and Warning headers, but it is not always regarded as essential privacy-sensitive information. 5.2.2. Optional SIP Headers Other optional SIP headers (such as Calll-Info, In-Reply-To, Organization, Referred-By, Reply-To, Server, Subject, User-Agent, and Warning) can contain privacy-sensitive information. A user agent generating an anonymous SIP message supporting this specification SHOULD NOT include any information that identifies the user in such optional headers. Munakata, et al. Expires January 15, 2009 [Page 7] Internet-Draft UA-Driven Privacy Mechanism for SIP July 2008 6. Security Considerations Many of the security considerations in either [RFC3323] and [RFC3325] remains valid even with the use of this specification but this specification does not introduce any new security consideration. In fact, this specification alleviates the security consideration described in RFC 3323 by providing a privacy mechanism which is executed at the user agent rather than being dependent on the network , as a result providing the user agent with certainty that crucial privacy sensitive information are concealed. 7. IANA Considerations This document requires no action by IANA. 8. References 8.1. Normative References [I-D.ietf-behave-turn] Rosenberg, J., Mahy, R., and P. Matthews, "Traversal Using Relays around NAT (TURN): Relay Extensions to Session Traversal Utilities for NAT (STUN)", draft-ietf-behave-turn-09 (work in progress), July 2008. [I-D.ietf-sip-gruu] Rosenberg, J., "Obtaining and Using Globally Routable User Agent (UA) URIs (GRUU) in the Session Initiation Protocol (SIP)", draft-ietf-sip-gruu-15 (work in progress), October 2007. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC3261] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A., Peterson, J., Sparks, R., Handley, M., and E. Schooler, "SIP: Session Initiation Protocol", RFC 3261, June 2002. [RFC4566] Handley, M., Jacobson, V., and C. Perkins, "SDP: Session Description Protocol", RFC 4566, July 2006. Munakata, et al. Expires January 15, 2009 [Page 8] Internet-Draft UA-Driven Privacy Mechanism for SIP July 2008 8.2. Informative References [I-D.ietf-sipping-config-framework] Channabasappa, S., "A Framework for Session Initiation Protocol User Agent Profile Delivery", draft-ietf-sipping-config-framework-15 (work in progress), February 2008. [RFC3323] Peterson, J., "A Privacy Mechanism for the Session Initiation Protocol (SIP)", RFC 3323, November 2002. [RFC3325] Jennings, C., Peterson, J., and M. Watson, "Private Extensions to the Session Initiation Protocol (SIP) for Asserted Identity within Trusted Networks", RFC 3325, November 2002. [RFC3515] Sparks, R., "The Session Initiation Protocol (SIP) Refer Method", RFC 3515, April 2003. [RFC4474] Peterson, J. and C. Jennings, "Enhancements for Authenticated Identity Management in the Session Initiation Protocol (SIP)", RFC 4474, August 2006. Authors' Addresses Mayumi Munakata NTT Corporation Email: munakata.mayumi@lab.ntt.co.jp Shida Schubert NTT Corporation Email: shida@ntt-at.com Takumi Ohba NTT Corporation 9-11, Midori-cho 3-Chome Musashino-shi, Tokyo 180-8585 Japan Phone: +81 422 59 7748 Email: ohba.takumi@lab.ntt.co.jp URI: http://www.ntt.co.jp Munakata, et al. Expires January 15, 2009 [Page 9] Internet-Draft UA-Driven Privacy Mechanism for SIP July 2008 Full Copyright Statement Copyright (C) The IETF Trust (2008). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Munakata, et al. Expires January 15, 2009 [Page 10]