Internet Draft C. DeSanti H.K. Vivek K. McCloghrie S. Gai Cisco Systems 13 October 2005 Fibre-Channel Zone Server MIB T11/05-505v3 and draft-kzm-imss-fc-zs-mib-01.txt Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress". The list of current Internet-Drafts can be accessed at http://www.ietf.org/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. Abstract This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for information related to a Fibre Channel Zone Server. At present, this memo is being proposed to T11.5 (http://www.t11.org). The plan is that it will later become a work item of IETF's IMSS working group. Expires April 2006 [Page 1] Internet Draft FC Zone Server MIB October 2005 Table of Contents 1 Introduction ................................................. 3 1.1 Change Log ................................................. 3 2 The Internet-Standard Management Framework ................... 4 3 Short Overview of Fibre Channel .............................. 5 4 Relationship to Other MIBs ................................... 7 5 MIB Overview ................................................. 8 5.1 Fibre Channel management instance .......................... 8 5.2 Switch Index ............................................... 8 5.3 Fabric Index ............................................... 9 5.4 Basic and Enhanced Modes ................................... 9 5.5 The t11ZsBasicGroup Group .................................. 10 5.6 The t11ZsEnhancedModeGroup ................................. 10 5.7 The t11ZsActivateGroup ..................................... 10 5.8 The t11ZsStatisticsGroup ................................... 10 5.9 The t11ZsNotificationGroup ................................. 10 5.10 The t11ZsNotificationControlGroup ......................... 10 6 The T11-GS-SERVER-SESSION-MIB Module ......................... 11 7 The T11-ZONE-SERVER-MIB Module ............................... 17 8 Intellectual Property ........................................ 71 9 Acknowledgements ............................................. 71 10 Normative References ........................................ 72 11 Informative References ...................................... 73 12 IANA Considerations ......................................... 73 13 Security Considerations ..................................... 73 14 Authors' Addresses .......................................... 75 Expires April 2006 [Page 2] Internet Draft FC Zone Server MIB October 2005 1. Introduction This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for information related to a Fibre Channel network's Zone Server. 1.1. Change Log This section to be deleted when the document becomes approved. 1.1.1. Initial version The initial version was submitted to T11.5 asT11/05-505v0 on 25 July 2005. 1.1.2. Changes made in 31 August version The following changes were made for the version dated 31 August 2005, which was submitted to T11.5 as: 05-505v1, and to the IETF as: draft-kzm-imss-fc-zs-mib-00.txt. - The Fibre Channel Overview section was expanded. - The MIB Overview section was expanded. - The Security Considerations was expanded. - Minor wording changes in several places. 1.1.3. Changes made in 20 September version The following changes were made for the version dated 20 September 2005, which was submitted to T11.5 as 05-505v2. - A new subsection on Basic versus Enhanced mode was added to the MIB Overview section. - The format of IP addresses for the t11GssSessionOwner was made more explicit. - The enumerated label 'gs5client' was changed to 'gs5Client'. Expires April 2006 [Page 3] Internet Draft FC Zone Server MIB October 2005 - Text was added to the DESCRIPTIONs of t11ZsServerDistributeResult and t11ZsServerDistributeFailReason to clarify that they are only useful in Basic mode. - Text was added to the DESCRIPTIONs of t11ZsServerDistribute and t11ZsServerDistributeResult to cite the use of Stage Fabric Configuration Update (SFC) requests as one way by which the requested distribution might be achieved. 1.1.4. Changes made in 13 October version The following changes were made for the version dated 13 October 2005, which was submitted to T11.5 as: 05-505v3, and to the IETF as: draft-kzm-imss-fc-zs-mib-01.txt. - Two new enumerations, 'rejectFailure' and 'otherFailure', were defined to replace one existing enumeration ('failure') of the t11ZsServerDistributeResult object. 'rejectFailure' indicates an SW-RJT error, and 'otherFailure' indicates some other failure. - The t11ZsServerDistributeFailReason object was changed to be the 4-byte reason value from a SW-RJT, as defined in FC-SW-4, when the value of t11ZsServerDistributeResult is 'rejectFailure'. - Extended the meaning of t11ZsServerDatabaseStorageType so that it also specifies the persistence across reboots of the read-write values in the t11ZsServerTable and t11ZsNotifyControlTable tables. - Added explicit statements that each of the Counter32's in this MIB have no discontinuities other than those which all Counter32's have when sysUpTime=0. - Fixed various other "nits" as defined by the IETF's latest guidelines for writing Internet-Drafts. 2. The Internet-Standard Management Framework For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410]. Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally Expires April 2006 [Page 4] Internet Draft FC Zone Server MIB October 2005 accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580]. 3. Short Overview of Fibre Channel The Fibre Channel (FC) is logically a bidirectional point-to-point serial data channel, structured for high performance. Fibre Channel provides a general transport vehicle for higher level protocols such as Small Computer System Interface (SCSI) command sets, the High- Performance Parallel Interface (HIPPI) data framing, IP (Internet Protocol), IEEE 802.2, and others. Physically, Fibre Channel is an interconnection of multiple communication points, called N_Ports, interconnected either by a switching network, called a Fabric, or by a point-to-point link. A Fibre Channel "node" consists of one or more N_Ports. A Fabric may consist of multiple Interconnect Elements, some of which are switches. An N_Port connects to the Fabric via a port on a switch called an F_Port. When multiple FC nodes are connected to a single port on a switch via an "Arbitrated Loop" topology, the switch port is called an FL_Port, and the nodes' ports are called NL_Ports. The term Nx_Port is used to refer to either an N_Port or an NL_Port. The term Fx_Port is used to refer to either an F_Port or an FL_Port. A switch port, which is interconnected to another switch port via an Inter-Switch Link (ISL), is called an E_Port. A B_Port connects a bridge device with an E_Port on a switch; a B_Port provides a subset of E_Port functionality. Many Fibre Channel components, including the fabric, each node, and most ports, have globally-unique names. These globally-unique names are typically formatted as World Wide Names (WWNs). More information on WWNs can be found in [FC-FS]. WWNs are expected to be persistent across agent and unit resets. Fibre Channel frames contain 24-bit address identifiers which identify the frame's source and destination ports. Each FC port has both an address identifier and a WWN. When a fabric is in use, the FC address identifiers are dynamic and are assigned by a switch. Each octet of a 24-bit address represents a level in an address hierarchy, with a Domain_ID being the highest level of the hierarchy. Expires April 2006 [Page 5] Internet Draft FC Zone Server MIB October 2005 Fabric Zones provide a mechanism to control frame delivery between Nx_Ports ("Hard Zoning") or to expose selected views of Name Server information ("Soft Zoning"). This technique is similar to virtual private networks in that the fabric has the ability to group devices into Zones. Administrators create Zones to increase network security, and prevent data loss or corruption, by controlling access between devices or user groups. Zones may be specifically used to create: a) Barriers between devices that use different operating systems. It is often critical to separate servers and storage devices with different operating systems because accidental transfer of information from one to another may delete or corrupt data; b) Logical subsets of closed user groups. Administrators may authorize access rights to specific Zones for specific user groups, thereby protecting confidential data from unauthorized access; c) Groups of devices that are separate from devices in the rest of a fabric. Zones allow certain processes to be performed on devices in a group without interrupting devices in other groups; or d) Temporary access between devices for specific purposes. Administrators may remove Zone restrictions temporarily, then restore Zone restrictions to perform normal processes. Zones are configured via a Fabric Zone Server, using requests defined in FC-GS-5 [FC-GS-5]), or via the T11-ZONE-SERVER-MIB module defined in this memo, or via some other mechanism. An Nx_Port may be a member of one or more Zones. Zone membership may be specified by: a) The N_Port_Name of the Nx_Port connected to the switch; b) The N_Port_ID assigned during Fabric Login; c) The Node_Name associated with the Nx_Port; note that the Node_Name may include more than one Nx_Port; d) The F_Port_Name of the Fx_Port to which the Nx_Port is connected; or e) The domain identification (Domain_ID) and physical port number of the Switch Port to which the Nx_Port is attached. Expires April 2006 [Page 6] Internet Draft FC Zone Server MIB October 2005 A Fabric's Zone Server may be used to create a Zone by specifying the Zone Members. One or more Zones may be collected into a Zone Set, and a Zone may be a member of more than one Zone Set. A Zone Set creates a collection of Zones that may be activated or deactivated as a single entity across all Switches in a Fabric (e.g., having two Zone Sets, one for normal operation, and a second for backup during off- hours). Only one Zone Set may be activated at one time. Other terminology defined in GS-5 is: an Active Zone Set is the Zone Set currently enforced by a Fabric; a Zone Set Database is a database of the Zone Sets available to be activated within a Fabric; and a Zoning Database is a generic term used to indicate a combination of an Active Zone Set and a Zone Set Database. Two distinct sets of management requests, Enhanced and Basic, are defined in [FC-GS-5] to interact with a Fabric Zone Server. If all the Switches in a Fabric support the Enhanced request set, then it may be used by a management application; otherwise only the Basic request set may be used, in order to support backward compatibility. In Enhanced Zoning, write access to a Zone Server's Zoning Database is rejected unless it occurs inside a Zoning session. A Zoning session is a Server session with a sub-type specifying the Zone Server. A Server session is delimited by a switch's receipt of Server Session Begin (SSB) and Server Session End (SSE) requests, sent via FC-GS-5's Common Transport (CT) protocol. A Zoning session in Enhanced Zoning is associated with a lock on the Fabric. An SSB request locks the Fabric, and an SSE request releases the lock. Changes requested in a Zoning Database by Enhanced Zoning commands persist after the end of the Zoning session only if the commands are followed by a Commit Zone Changes (CMIT) request within the same Server session. Query requests to a Fabric Zone Server (in Enhanced mode) should be issued inside a Zoning session in order to ensure that the Zoning Database information obtained is consistent. 4. Relationship to Other MIBs The Fibre Channel Management MIB [FC-MGMT] defines basic information for Fibre Channel hosts and switches, including extensions to the standard IF-MIB [RFC2863] for Fibre Channel interfaces. This MIB extends beyond [FC-MGMT] to cover the management of Fibre Channel Zoning Servers, both for Basic Zoning Management and for Expires April 2006 [Page 7] Internet Draft FC Zone Server MIB October 2005 Enhanced Zoning Management, as defined in the FC-GS-5 specification. This MIB imports some common Textual Conventions from T11-TC-MIB, defined in [FC-FAM-MIB]. It also imports a TC from T11-FC-NAME- SERVER-MIB, defined in [FC-NSM-MIB]. 5. MIB Overview This document defines two MIB modules: T11-GS-SERVER-SESSION-MIB and T11-ZONE-SERVER-MIB. T11-GS-SERVER-SESSION-MIB supports FC-GS-5's (potentially) generic capability of having Server sessions, a capability which is used by Enhanced Zoning. T11-ZONE-SERVER-MIB is specific to the operation of Zone Servers, which can operate in Basic mode or in Enhanced mode. 5.1. Fibre Channel management instance A Fibre Channel management instance is defined in [FC-MGMT] as a separable managed instance of Fibre Channel functionality. Fibre Channel functionality may be grouped into Fibre Channel management instances in whatever way is most convenient for the implementation(s). For example, one such grouping accommodates a single SNMP agent having multiple AgentX [RFC2741] sub-agents, with each sub-agent implementing a different Fibre Channel management instance. The object, fcmInstanceIndex, is IMPORTed from the FC-MGMT-MIB [FC-MGMT] as the index value to uniquely identify each Fibre Channel management instance within the same SNMP context ([RFC3411] section 3.3.1). 5.2. Switch Index The FC-MGMT-MIB [FC-MGMT] defines the fcmSwitchTable as a table of information about Fibre Channel switches which are managed by Fibre Channel management instances. Each Fibre Channel management instance can manage one or more Fibre Channel switches. The Switch Index, fcmSwitchIndex, is IMPORTed from the FC-MGMT-MIB as the index value to uniquely identify a Fibre Channel switch amongst those (one or more) managed by the same Fibre Channel management instance. Expires April 2006 [Page 8] Internet Draft FC Zone Server MIB October 2005 5.3. Fabric Index The latest standard for an interconnecting Fabric containing multiple Fabric Switch elements is [FC-SW-4]; it specifies the operation of both a single Fabric in a physical infrastructure, as well as the support of multiple Virtual Fabrics operating within one (or more) physical infrastructures. Whether operating on a physical Fabric (i.e., without Virtual Fabrics) or within a Virtual Fabric, the operation of a Zone Server within a Fabric is identical. Therefore, this MIB defines all Fabric-related information in tables which are INDEX-ed by an arbitrary integer, named a "Fabric Index", the syntax of which is IMPORTed from the T11-TC-MIB [FC-FAM-MIB]. When a device is connected to a single physical Fabric, without use of any virtual Fabrics, the value of this Fabric Index will always be 1. In an environment of multiple virtual and/or physical Fabrics, this index provides a means to distinguish one Fabric from another. 5.4. Basic and Enhanced Modes The two Zone Server modes, Basic and Enhanced, have a sufficient amount of commonality to make it worth having one set of MIB objects which are used for the subset common to both modes. To accommodate the differences, additional MIB objects are defined. For Enhanced mode, the additional objects are defined in a group, t11ZsEnhancedModeGroup, which is only required to be implemented in a Zone Server capability of supporting Enhanced mode. The objects specific to Basic mode are always (even in Enhanced mode) expected to be implemented, but when in Enhanced mode, their values are either restricted or do not affect current operations. An example of restricted values is: the distribution of updates to the Zone Server database throughout the Fabric has to be requested explicitly in Basic mode; this functionality is provided in the MIB by the t11ZsServerDistribute object, together with its associated objects: t11ZsServerDistributeResult and t11ZsServerDistributeFailReason. In contrast, in Enhanced mode, the distribution is implicit because the commit function requires the update to the Zone Server database to be propagated throughout the Fabric (see section 6.4.7.3 of [FC-GS-5]). Thus, when operating in Enhanced mode, t11ZsServerDistribute, t11ZsServerDistributeResult and t11ZsServerDistributeFailReason have fixed values. An example of not affect current operations is: t11ZsServerHardZoning which specifies whether a switch enforces hard Zoning on a fabric Expires April 2006 [Page 9] Internet Draft FC Zone Server MIB October 2005 when in Basic mode. This object is instantiated and could even be modified while in Enhanced mode, but its value only takes effect when in Basic mode. (Note that in Enhanced mode, t11ZsActiveHardZoning specifies whether hard Zoning is enabled on a particular Zone.) 5.5. The t11ZsBasicGroup Group This group contains objects to retrieve and to modify the Zoning configuration of a Zone Server capable of operating in Basic mode. 5.6. The t11ZsEnhancedModeGroup This group contains objects to retrieve and to modify the Zoning configuration of a Zone Server capable of operating in Enhanced mode. 5.7. The t11ZsActivateGroup This group contains objects which allow a Zone Set to be activated via SNMP SetRequests and provide the status and result of such an activation. 5.8. The t11ZsStatisticsGroup This group contains objects for collecting Zone Server statistics. 5.9. The t11ZsNotificationGroup This group contains notifications for monitoring: Zone merge successes and failures, Zone Server request rejections, changes in the Default Zoning behaviour, and the success or failure of an attempt to activate or deactivate a Zone Set. 5.10. The t11ZsNotificationControlGroup This group contains objects which allow each type of notification (in the t11ZsNotificationGroup group) to be independently enabled or disabled. It also contains objects which are used to include useful information in those notifications; these objects are defined as read-only to allow the values contained in the most recent notification to be queried. Expires April 2006 [Page 10] Internet Draft FC Zone Server MIB October 2005 6. The T11-GS-SERVER-SESSION-MIB Module T11-GS-SERVER-SESSION-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, mib-2 FROM SNMPv2-SMI -- [RFC2578] MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- [RFC2580] fcmInstanceIndex, fcmSwitchIndex FROM FC-MGMT-MIB -- [FC-MGMT] T11FabricIndex FROM T11-TC-MIB; -- [FC-FAM-MIB] t11GsServerSessionMIB MODULE-IDENTITY LAST-UPDATED "200510130000Z" ORGANIZATION "T11" CONTACT-INFO " Claudio DeSanti Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA EMail: cds@cisco.com Keith McCloghrie Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA Email: kzm@cisco.com" DESCRIPTION "The MIB module for the management of Fibre Channel Server Sessions as defined generically in FC-GS-5 to represent a collection of one or more requests for the session's server. Such a session is started by a Server Session Begin (SSB) request and terminated by a Server Session End (SSE) request. In particular, GS-5 Server Sessions are used by Enhanced Zoning Management." REVISION "200510130000Z" DESCRIPTION "Initial version of this MIB." ::= { mib-2 nnn } -- to be determined later t11GssMIBObjects OBJECT IDENTIFIER ::= { t11GsServerSessionMIB 1 } t11GssMIBConformance OBJECT IDENTIFIER ::= { t11GsServerSessionMIB 2 } t11GssMIBNotifications OBJECT IDENTIFIER ::= { t11GsServerSessionMIB 0 } t11GssConfiguration OBJECT IDENTIFIER ::= { t11GssMIBObjects 1 } Expires April 2006 [Page 11] Internet Draft FC Zone Server MIB October 2005 -- -- t11GssSessionTable -- t11GssSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF T11GssSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about the active GS-5 Server sessions on one or more switches on all fabrics known to those switches." REFERENCE "ANSI INCITS xxx/200x, T11/Project 1677-D/Rev 8.00, Fibre Channel - Generic Services-5 (FC-GS-5), 17 September 2004, sections 4.9.5 and 6.4.10.2." ::= { t11GssConfiguration 1 } t11GssSessionEntry OBJECT-TYPE SYNTAX T11GssSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information specific to a GS-5 Server session for a particular fabric on a particular switch (identified by values of fcmInstanceIndex and fcmSwitchIndex). Note that each switch can have at most one Server session per Fabric. If GS-5 requires that a session be established before changes can be made, then in order to make such changes via SNMP SetRequests, an entry in this table must be created. Such an entry is created implicitly (with t11GssSessionOwnerType having a value of 'snmp') by the first SetRequest which makes such a change." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11GssSessionFabricIndex } ::= { t11GssSessionTable 1 } T11GssSessionEntry ::= SEQUENCE { t11GssSessionFabricIndex T11FabricIndex, t11GssSessionOwnerType INTEGER, t11GssSessionOwner OCTET STRING, Expires April 2006 [Page 12] Internet Draft FC Zone Server MIB October 2005 t11GssSessionControl INTEGER, t11GssSessionCommitResult INTEGER } t11GssSessionFabricIndex OBJECT-TYPE SYNTAX T11FabricIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique index value which uniquely identifies a particular Fabric. In a fabric conformant to FC-SW-4, multiple Virtual Fabrics can operate within one (or more) physical infrastructures, and this index value is used to uniquely identify a particular (physical or virtual) fabric within a physical infrastructure. In a fabric conformant to versions earlier than FC-SW-4, only a single fabric could operate within a physical infrastructure, and thus, the value of this fabric index was defined to always be 1." ::= { t11GssSessionEntry 1 } t11GssSessionOwnerType OBJECT-TYPE SYNTAX INTEGER { other(1), gs5Client(2), cli(3), snmp(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the owner type for this session: other - none of the following. gs5Client - Fibre Channel GS-5 services client. cli - Command Line Interface (CLI). snmp - this session was established due to an SNMP SetRequest. " ::= { t11GssSessionEntry 2 } Expires April 2006 [Page 13] Internet Draft FC Zone Server MIB October 2005 t11GssSessionOwner OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the owner for this session. If the value of the corresponding instance of t11GssSessionOwnerType is 'gs5Client', this object will contain the FC_ID of the GS-5 client which issued the Server Session Begin (SSB) which initiated this session. If the value of the corresponding instance of t11GssSessionOwnerType object is 'cli', this object will contain the user name of the CLI (Command Line Interface) user on whose behalf the session was setup. If the value of the corresponding instance of t11GssSessionOwnerType is 'snmp', this object will contain the source IP address of the SNMP SetRequests which initiated the setup of this session, in the form: for IPv4, n.n.n.n, or, for IPv6, in any of the three conventional forms listed in section 2.2 of RFC 3513." REFERENCE "ANSI INCITS xxx/200x, T11/Project 1677-D/Rev 8.00, Fibre Channel - Generic Services-5 (FC-GS-5), 17 September 2004, section 4.9.5.2. RFC 3513, Internet Protocol Version 6 (IPv6) Addressing Architecture, April 2003." ::= { t11GssSessionEntry 3 } t11GssSessionControl OBJECT-TYPE SYNTAX INTEGER { commitZoneChanges(1), terminateSession(2), noop(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object can only be set when the corresponding Expires April 2006 [Page 14] Internet Draft FC Zone Server MIB October 2005 instance of t11GssSessionOwnerType has the value 'snmp' and by the owner of the session. A particular Server may impose additional constraints, e.g., a Zone Server will reject a commit when it is operating in Basic mode. Setting the object requests an action: commitZoneChanges - requests that the changes made within this session to the Zone Set Database be committed. terminateSession - requests that the session be terminated, with any outstanding changes made within this session being discarded. noop - requests nothing. When read, the value is always 'noop'." REFERENCE "ANSI INCITS xxx/200x, T11/Project 1677-D/Rev 8.00, Fibre Channel - Generic Services-5 (FC-GS-5), 17 September 2004, section 6.4.10.2." ::= { t11GssSessionEntry 4 } t11GssSessionCommitResult OBJECT-TYPE SYNTAX INTEGER { commitSuccessful(1), commitInProgress(2), commitFailed(3), none(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the outcome of the most recent 'commitChanges' request which was invoked via the corresponding instance of t11GssSessionControl. The value 'none' indicates that no such request has been invoked via the corresponding instance of t11GssSessionControl." REFERENCE "ANSI INCITS xxx/200x, T11/Project 1677-D/Rev 8.00, Fibre Channel - Generic Services-5 (FC-GS-5), 17 September 2004, section 6.4.10.2.3." Expires April 2006 [Page 15] Internet Draft FC Zone Server MIB October 2005 ::= { t11GssSessionEntry 5 } -- Conformance t11GssMIBCompliances OBJECT IDENTIFIER ::= { t11GssMIBConformance 1 } t11GssMIBGroups OBJECT IDENTIFIER ::= { t11GssMIBConformance 2 } t11GssMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which support GS-5 Server sessions." MODULE MANDATORY-GROUPS { t11GssActiveGroup } OBJECT t11GssSessionControl MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { t11GssMIBCompliances 1 } -- Units of Conformance t11GssActiveGroup OBJECT-GROUP OBJECTS { t11GssSessionOwnerType, t11GssSessionOwner, t11GssSessionControl, t11GssSessionCommitResult } STATUS current DESCRIPTION "A collection of objects containing information about active GS-5 Server sessions." ::= { t11GssMIBGroups 1 } END Expires April 2006 [Page 16] Internet Draft FC Zone Server MIB October 2005 7. The T11-ZONE-SERVER-MIB Module T11-ZONE-SERVER-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, mib-2, Counter32, Unsigned32 FROM SNMPv2-SMI -- [RFC2578] MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF -- [RFC2580] TEXTUAL-CONVENTION, RowStatus, StorageType, TruthValue, TimeStamp FROM SNMPv2-TC -- [RFC2579] SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- [RFC3411] ifIndex FROM IF-MIB -- [RFC2863] fcmInstanceIndex, fcmSwitchIndex, FcNameIdOrZero, FcDomainIdOrZero FROM FC-MGMT-MIB -- [FC-MGMT] T11NsGs4RejectReasonCode FROM T11-FC-NAME-SERVER-MIB -- [FC-NS-MIB] T11FabricIndex FROM T11-TC-MIB -- [FC-FAM-MIB] t11FamLocalSwitchWwn FROM T11-FC-FABRIC-ADDR-MGR-MIB; -- [FC-FAM-MIB] t11ZoneServerMIB MODULE-IDENTITY LAST-UPDATED "200510130000Z" ORGANIZATION "T11" CONTACT-INFO " Claudio DeSanti Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA EMail: cds@cisco.com Keith McCloghrie Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA Email: kzm@cisco.com" DESCRIPTION "The MIB module for the management of Fibre Channel Zoning Servers, both for Basic Zoning Management and for Enhanced Zoning Management, as defined in the FC-GS-5 specification. Expires April 2006 [Page 17] Internet Draft FC Zone Server MIB October 2005 When this MIB is used for Enhanced Zoning Management, operations which request the modification of zoning definitions will be rejected if they are not issued within the context of a GS-5 Server session -- see the related MIB module: T11-GS-SERVER-SESSION-MIB. For changes to a Zone Set Database made by SNMP SetRequests within the context of a GS-5 Server session, a Zone Server (in Enhanced mode) keeps track of such changes but does not update its Zone Set Database unless and until a 'commit' operation. To model this behaviour, this MIB assumes that a Zone Server (in Enhanced mode) takes a snapshot of its Zone Set Database when a session is established so as to create what is herein called the 'copy' database. It is this 'copy' database which is then updated by SNMP SetRequests within that session. If and when a 'commit' operation is requested in the session, the 'copy' database is then used to overwrite the committed contents of the Zone Set database, and the new Zone Set database is distributed to all other switches in the fabric. If the session is ended without a successful commit, the updates made during the session (or, since any last previous commit in the same session) are discarded. When this MIB is used for Basic Zoning Management, operations which request the modification of Zoning definitions are made at the Zone Server on a particular switch, and a separate set of MIB objects are defined to request they be distributed across the fabric." REVISION "200510130000Z" DESCRIPTION "Initial version of this MIB. Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC yyyy; see the RFC itself for full legal notices." -- RFC Editor: replace yyyy with actual RFC number & remove this note REVISION "200510100000Z" DESCRIPTION "Initial version of this MIB module, published as RFCyyyy." -- RFC-Editor, replace yyyy with actual RFC number & remove this note ::= { mib-2 XXX } -- to be assigned by IANA -- RFC Editor: replace XXX with IANA-assigned number & remove this note t11ZsMIBObjects OBJECT IDENTIFIER ::= { t11ZoneServerMIB 1 } Expires April 2006 [Page 18] Internet Draft FC Zone Server MIB October 2005 t11ZsMIBConformance OBJECT IDENTIFIER ::= { t11ZoneServerMIB 2 } t11ZsMIBNotifications OBJECT IDENTIFIER ::= { t11ZoneServerMIB 0 } t11ZsConfiguration OBJECT IDENTIFIER ::= { t11ZsMIBObjects 1 } t11ZsStatistics OBJECT IDENTIFIER ::= { t11ZsMIBObjects 2 } -- Textual Conventions T11ZsZoneMemberType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the addressing mechanism by which a member is identified: 01 - N_Port_Name 02 - Domain_ID and physical port 03 - N_Port_ID 04 - Node_Name 05 - Alias Name 06 - F_Port_Name E0-FF (hex) - Vendor Specific. " REFERENCE "ANSI INCITS xxx/200x, T11/Project 1677-D/Rev 8.00, Fibre Channel - Generic Services-5 (FC-GS-5), 17 September 2004, section 6.4.8.3.6." SYNTAX Unsigned32 (0..255) T11ZsRejectReasonExplanation ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The reason code explanation when rejecting a Zone Server request: 'other' - e.g., a reason code assigned too recently to be included in this version of this MIB 'noAdditionalExplanation' - there is no additional explanation 'zonesNotSupported' - Zones are not supported 'zoneSetNameUnknown' - Zone Set name is not known 'noZoneSetActive' - no Zone Set is currently active 'zoneNameUnknown' Expires April 2006 [Page 19] Internet Draft FC Zone Server MIB October 2005 - Zone name is unknown 'zoneStateUnknown' - state of the Zone is not known 'incorrectPayloadLen' - payload length is not correct 'tooLargeZoneSet' - Zone Set is larger than permitted size 'deactivateZoneSetFailed' - deactivation of Zone Set failed 'reqNotSupported' - request is not supported 'capabilityNotSupported' - capability is not supported 'zoneMemberIDTypeNotSupp' - Zone Member Identifier Type is not supported 'invalidZoneSetDefinition' - Zone Set definition is invalid 'enhancedZoningCmdsNotSupported' - Enhanced Zoning commands are not supported 'zoneSetExists' - Zone Set already exists 'zoneExists' - Zone already exists 'aliasExists' - Zone Alias already exists 'zoneSetUnknown' - Zone Set unknown 'zoneUnknown' - Zone unknown 'aliasUnknown' - Zone Alias unknown 'zoneAliasTypeUnknown' - unknown Zone attribute type 'unableEnhancedMode' - fabric unable to work in Enhanced Mode 'basicZoningCmdsNotSupported' - Basic Zoning commands are not supported 'zoneAttribObjectExists' - Zone attribute object already exists 'zoneAttribObjectUnknown' - Zone attribute object unknown 'requestInProcess' - request in process 'cmitInProcess' - CMIT in process Expires April 2006 [Page 20] Internet Draft FC Zone Server MIB October 2005 'hardEnforcementFailed' - hard enforcement failed 'unresolvedReferences' - unresolved references in the Zone Set Database 'consistencyChecksFailed' - consistency checks failed." REFERENCE "ANSI INCITS xxx/200x, T11/Project 1677-D/Rev 8.00, Fibre Channel - Generic Services-5 (FC-GS-5), 17 September 2004, section 6.4.9." SYNTAX INTEGER { other(1), noAdditionalExplanation(2), zonesNotSupported(3), zoneSetNameUnknown(4), noZoneSetActive(5), zoneNameUnknown(6), zoneStateUnknown(7), incorrectPayloadLen(8), tooLargeZoneSet(9), deactivateZoneSetFailed(10), reqNotSupported(11), capabilityNotSupported(12), zoneMemberIDTypeNotSupp(13), invalidZoneSetDefinition(14), enhancedZoningCmdsNotSupported(15), zoneSetExists(16), zoneExists(17), aliasExists(18), zoneSetUnknown(19), zoneUnknown(20), aliasUnknown(21), zoneAliasTypeUnknown(22), unableEnhancedMode(23), basicZoningCmdsNotSupported(24), zoneAttribObjectExists(25), zoneAttribObjectUnknown(26), requestInProcess(27), cmitInProcess(28), hardEnforcementFailed(29), unresolvedReferences(30), consistencyChecksFailed(31) } T11ZoningName ::= TEXTUAL-CONVENTION Expires April 2006 [Page 21] Internet Draft FC Zone Server MIB October 2005 STATUS current DESCRIPTION "This datatype is a refinement of an SnmpAdminString, and is used to represent a name stored in a Fibre Channel Zoning Data Structure. The value begins with a letter (upper or lower case) followed by zero or more characters from the set: lower case letters, upper case letters, numbers, and the symbols ($-^_). The value does not include fill bytes." REFERENCE "ANSI INCITS xxx/200x, T11/Project 1677-D/Rev 8.00, Fibre Channel - Generic Services-5 (FC-GS-5), 17 September 2004, section 6.4.8.1." SYNTAX OCTET STRING (SIZE (1..64)) -- -- t11ZsServerTable -- t11ZsServerTable OBJECT-TYPE SYNTAX SEQUENCE OF T11ZsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about the Zone Servers on each fabric in one or more switches, and providing the capability to perform operations on their Zone Server databases." ::= { t11ZsConfiguration 1 } t11ZsServerEntry OBJECT-TYPE SYNTAX T11ZsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information specific to a Zone Server for a particular fabric (identified by the value of t11ZsServerFabricIndex) on a particular switch (identified by values of fcmInstanceIndex and fcmSwitchIndex)." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11ZsServerFabricIndex } Expires April 2006 [Page 22] Internet Draft FC Zone Server MIB October 2005 ::= { t11ZsServerTable 1 } T11ZsServerEntry ::= SEQUENCE { t11ZsServerFabricIndex T11FabricIndex, t11ZsServerCapabilityObject BITS, t11ZsServerDatabaseStorageType StorageType, t11ZsServerDistribute INTEGER, t11ZsServerDistributeResult INTEGER, t11ZsServerDistributeFailReason OCTET STRING, t11ZsServerLastChange TimeStamp, t11ZsServerHardZoning TruthValue, t11ZsServerReadFromDatabase INTEGER, t11ZsServerOperationMode INTEGER, t11ZsServerChangeModeResult INTEGER, t11ZsServerDefaultZoneSetting INTEGER, t11ZsServerMergeControlSetting INTEGER, t11ZsServerDefZoneBroadcast TruthValue } t11ZsServerFabricIndex OBJECT-TYPE SYNTAX T11FabricIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique index value which uniquely identifies a particular fabric. In a fabric conformant to FC-SW-4, multiple Virtual Fabrics can operate within one (or more) physical infrastructures, and this index value is used to uniquely identify a particular (physical or virtual) fabric within a physical infrastructure. In a fabric conformant to versions earlier than FC-SW-4, only a single fabric could operate within a physical infrastructure, and thus, the value of this fabric index was defined to always be 1." ::= { t11ZsServerEntry 1 } t11ZsServerCapabilityObject OBJECT-TYPE SYNTAX BITS { enhancedMode(0), zonesetDb(1), activateDirect(2), hardZoning(3) Expires April 2006 [Page 23] Internet Draft FC Zone Server MIB October 2005 } MAX-ACCESS read-only STATUS current DESCRIPTION "This bitmap represents the capability of the switch on this fabric: 'enhancedMode' - able to support enhanced Zoning mode of operation. 'zonesetDb' - able to support maintaining of a Zone Set Database. 'activateDirect' - able to support the Activate Direct command. 'hardZoning' - able to support Hard Zoning." REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), T11/Project 1674-D/Rev 7.5, June 2005, section 6.1.23.4.4" ::= { t11ZsServerEntry 2 } t11ZsServerDatabaseStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the memory realization, on a particular switch, of the Zone Set database for a particular fabric. Specifically, each row in the following tables: t11ZsSetTable t11ZsZoneTable t11ZsSetZoneTable t11ZsAliasTable t11ZsZoneMemberTable t11ZsAttribBlockTable t11ZsAttribTable has a StorageType as specified by the instance of this object which is INDEX-ed by the same values of fcmInstanceIndex, fcmSwitchIndex and t11ZsServerFabricIndex. Expires April 2006 [Page 24] Internet Draft FC Zone Server MIB October 2005 This value of this object is also used to indicate the persistence across reboots of writable values in its row of the t11ZsServerTable, as well as the corresponding row in the t11ZsNotifyControlTable." DEFVAL { nonVolatile } ::= { t11ZsServerEntry 3 } t11ZsServerDistribute OBJECT-TYPE SYNTAX INTEGER { noop(1), zonesetDb(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object can be set only in Basic mode. When set to the value 'zonesetDb', it requests that the Zone Set database of a particular switch for a particular fabric be distributed to every other switch in that fabric, e.g., by using Stage Fabric Configuration Update (SFC) requests. Setting this object to 'noop' has no effect. When read, the value of this object is always 'noop'. Setting this object will fail if the corresponding instance of t11ZsServerOperationMode has the value 'enhanced', or if the corresponding instance of t11ZsZoneSetDistributeResult has the value 'inProgress'." REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), T11/Project 1674-D/Rev 7.5, June 2005, section 6.1.19.1." ::= { t11ZsServerEntry 4 } t11ZsServerDistributeResult OBJECT-TYPE SYNTAX INTEGER { none(1), inProgress(2), success(3), rejectFailure(4), otherFailure(5) } MAX-ACCESS read-only STATUS current DESCRIPTION Expires April 2006 [Page 25] Internet Draft FC Zone Server MIB October 2005 "The status/result of the last distribution of the Zone Set database which was invoked via the corresponding instance of t11ZsZoneSetDistribute, e.g., the status/result of Stage Fabric Configuration Update (SFC) request(s) used to implement the setting of t11ZsZoneSetDistribute. 'none' - no distribution has been invoked via the corresponding instance of t11ZsZoneSetDistribute. 'inProgress' - distribution is still in progress. 'success' - distribution completely successfully. 'rejectFailure' - distribution failed due to a SW-RJT. 'otherFailure' - distribution failed for some other reason. When the value is 'rejectFailure', the corresponding instance of t11ZsServerDistributeFailReason contains the reason code and reason code explanation. While in Enhanced mode, the value of this object is always 'none'." ::= { t11ZsServerEntry 5 } t11ZsServerDistributeFailReason OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0 | 4)) MAX-ACCESS read-only STATUS current DESCRIPTION "When the corresponding instance of t11ZsZoneSetDistributeResult has the value 'rejectFailure', this object contains the 4-byte code contained in the SW_RJT. The four bytes are formatted to be: "Reserved", "Reason Code", "Reason Code Explanation", and "Vendor Specific", respectively, as specified in FC-SW-4. When the corresponding instance of t11ZsZoneSetDistributeResult has a value other than 'rejectFailure', this object should contain the zero-length string. While in Enhanced mode, the value of this object is the zero-length string." REFERENCE Expires April 2006 [Page 26] Internet Draft FC Zone Server MIB October 2005 "Fibre Channel - Switch Fabric - 4 (FC-SW-4), Rev 7.4, May 2005, section 6.1.3 and tables 4, 5 & 6." ::= { t11ZsServerEntry 6 } t11ZsServerLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the last change (creation, modification or deletion) to the Zone Set database for the Zone Server for a particular fabric. If said Zone Set database has not changed since the last re-initialization of the local network management system, then this object will contain a zero value." ::= { t11ZsServerEntry 7 } t11ZsServerHardZoning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether this switch, if and when it is in Basic mode, enforces Hard Zoning on this fabric." REFERENCE "ANSI INCITS xxx/200x, T11/Project 1677-D/Rev 8.00, Fibre Channel - Generic Services-5 (FC-GS-5), 17 September 2004, section 6.4.10.3.2." ::= { t11ZsServerEntry 8 } t11ZsServerReadFromDatabase OBJECT-TYPE SYNTAX INTEGER { committedDB(1), copyDB(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "In Enhanced mode, this object specifies whether subsequent SNMP Responses (generated by the local SNMP agent) to operations which read the configuration of Zone Sets, Zones, Members, Aliases and Attributes will reflect the values stored in the current (committed) Zone Set database, or those stored in the 'copy' database. Expires April 2006 [Page 27] Internet Draft FC Zone Server MIB October 2005 In Basic mode, the value of this object is always 'committedDB' (since there is no 'copy' database in Basic mode)." DEFVAL { committedDB } ::= { t11ZsServerEntry 9 } t11ZsServerOperationMode OBJECT-TYPE SYNTAX INTEGER { basic(1), enhanced(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The operational mode of the Zone Server. Setting this object to 'enhanced' requests the mode of operation of the Zone Server be Enhanced mode. Such a set can succeed only if all devices in the Fibre Channel fabric are capable of working in Enhanced mode. If not, the request will fail and the corresponding value of t11ZsServerChangeModeResult will so indicate. Setting this object to 'basic' requests the mode of operation of the Zone Server be Basic mode. However, such a set may fail while operating in Enhanced mode, since FC-GS-5 makes no provision for changing (back) to Basic mode. Note that setting this object does not cause or require the setup of a 'session'." REFERENCE "ANSI INCITS xxx/200x, T11/Project 1677-D/Rev 8.00, Fibre Channel - Generic Services-5 (FC-GS-5), 17 September 2004, sections 6.4.10.1.1 and 6.4.10.1.2." DEFVAL { basic } ::= { t11ZsServerEntry 10 } t11ZsServerChangeModeResult OBJECT-TYPE SYNTAX INTEGER { success(1), failure(2), inProgress(3), none(4) } Expires April 2006 [Page 28] Internet Draft FC Zone Server MIB October 2005 MAX-ACCESS read-only STATUS current DESCRIPTION "When this this object has the value of 'success' or 'failure', the value indicates the outcome of the most recent request, invoked via t11ZsServerOperationMode, to change the mode of operation of the Zone Server. When such a request is in progress, this object has the value 'inProgress'. Prior to the first such request, the value of this object is 'none'." ::= { t11ZsServerEntry 11 } t11ZsServerDefaultZoneSetting OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the Enhanced Zoning flag which governs the behaviour of the Default Zone on this fabric. If this object is set to 'permit', then the members of the Default Zone on this fabric can communicate with each other. If this object is set to 'deny', then the members of the Default Zone on this fabric cannot communicate with each other." REFERENCE "ANSI INCITS xxx/200x, T11/Project 1677-D/Rev 8.00, Fibre Channel - Generic Services-5 (FC-GS-5), 17 September 2004, section 6.4.10.1.1." DEFVAL { deny } ::= { t11ZsServerEntry 12 } t11ZsServerMergeControlSetting OBJECT-TYPE SYNTAX INTEGER { allow(1), restrict(2) } MAX-ACCESS read-write STATUS current DESCRIPTION Expires April 2006 [Page 29] Internet Draft FC Zone Server MIB October 2005 "This object controls the Enhanced Zoning flag which indicates the Merge Control Setting for this fabric: 'allow' - a switch may join the fabric only if its Zoning Database is able to merge with the fabric's Zoning Database. 'restrict' - a switch may join the fabric only if its Zoning Database is equal to the fabric's Zoning Database." REFERENCE "ANSI INCITS xxx/200x, T11/Project 1677-D/Rev 8.00, Fibre Channel - Generic Services-5 (FC-GS-5), 17 September 2004, section 6.4.10.1.1." DEFVAL { allow } ::= { t11ZsServerEntry 13 } t11ZsServerDefZoneBroadcast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls an Enhanced Zoning capability: it indicates whether Broadcast Zoning is enabled on the Default Zone on this fabric. If this object is set to 'true', then it is enabled. If this object is set to 'false', then it is disabled. If broadcast Zoning is enabled on a Default Zone, then broadcast frames generated by a member in that Default Zone will be restricted to members in that Default Zone." REFERENCE "ANSI INCITS xxx/200x, T11/Project 1677-D/Rev 8.00, Fibre Channel - Generic Services-5 (FC-GS-5), 17 September 2004, section 6.4.7.2.2." ::= { t11ZsServerEntry 14 } -- -- t11ZsSetTable -- t11ZsSetTable OBJECT-TYPE SYNTAX SEQUENCE OF T11ZsSetEntry MAX-ACCESS not-accessible STATUS current Expires April 2006 [Page 30] Internet Draft FC Zone Server MIB October 2005 DESCRIPTION "A table containing information on every Zone Set in the Zone Set database of the Zone Servers on each fabric in one or more switches. In Enhanced mode, changes to a database made via this table are always made to the 'copy' database, but values read from this table reflect the contents of either the 'copy' database or the current (committed) database as indicated by the corresponding value of t11ZsServerReadFromDatabase." ::= { t11ZsConfiguration 2 } t11ZsSetEntry OBJECT-TYPE SYNTAX T11ZsSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about a Zone Set in the Zone Set database of a particular fabric (identified by the value of t11ZsServerFabricIndex) on a particular switch (identified by values of fcmInstanceIndex and fcmSwitchIndex). A Zone Set is created containing zero or more existing Zones. As and when new Zones are created (as rows in the t11ZsZoneTable), they can be added to a Zone Set by creating an entry for each in the t11ZsSetZoneTable. The StorageType of a row in this table is specified by the instance of t11ZsServerDatabaseStorageType which is INDEX-ed by the same values of fcmInstanceIndex, fcmSwitchIndex and t11ZsServerFabricIndex." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11ZsServerFabricIndex, t11ZsSetIndex } ::= { t11ZsSetTable 1 } T11ZsSetEntry ::= SEQUENCE { t11ZsSetIndex Unsigned32, t11ZsSetName T11ZoningName, t11ZsSetRowStatus RowStatus } t11ZsSetIndex OBJECT-TYPE Expires April 2006 [Page 31] Internet Draft FC Zone Server MIB October 2005 SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of a Zone Set. This object uniquely identifies a Zone Set in the Zone Set database for a particular fabric on a particular switch." ::= { t11ZsSetEntry 1 } t11ZsSetName OBJECT-TYPE SYNTAX T11ZoningName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of this Zone Set. The t11ZsSetName should be unique within a fabric. The Zone Set can be renamed by setting this object to a new value." ::= { t11ZsSetEntry 2 } t11ZsSetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. This object can not be set to 'active' unless the corresponding value of t11ZsSetName is unique within the fabric's Zone Server database on this switch." ::= { t11ZsSetEntry 3 } -- -- t11ZsZoneTable -- t11ZsZoneTable OBJECT-TYPE SYNTAX SEQUENCE OF T11ZsZoneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table gives information on all the Zones in the Zone Set database of the Zone Servers on each fabric in one or more switches. Expires April 2006 [Page 32] Internet Draft FC Zone Server MIB October 2005 In Enhanced mode, changes to a database made via this table are always made to the 'copy' database, but values read from this table reflect the contents of either the 'copy' database or the current (committed) database as indicated by the corresponding value of t11ZsServerReadFromDatabase." ::= { t11ZsConfiguration 3 } t11ZsZoneEntry OBJECT-TYPE SYNTAX T11ZsZoneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about a Zone in the Zone Set database of a particular fabric (identified by the value of t11ZsServerFabricIndex) on a particular switch (identified by values of fcmInstanceIndex and fcmSwitchIndex). To create a Zone, first create an entry in this table, and then add members to it by creating entries in the t11ZsZoneMemberTable. The StorageType of a row in this table is specified by the instance of t11ZsServerDatabaseStorageType which is INDEX-ed by the same values of fcmInstanceIndex, fcmSwitchIndex and t11ZsServerFabricIndex." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11ZsServerFabricIndex, t11ZsZoneIndex } ::= { t11ZsZoneTable 1 } T11ZsZoneEntry ::= SEQUENCE { t11ZsZoneIndex Unsigned32, t11ZsZoneName T11ZoningName, t11ZsZoneAttribBlock Unsigned32, t11ZsZoneRowStatus RowStatus } t11ZsZoneIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value which uniquely identifies this Zone within a particular fabric's Zone Set database Expires April 2006 [Page 33] Internet Draft FC Zone Server MIB October 2005 on a particular switch." ::= { t11ZsZoneEntry 1 } t11ZsZoneName OBJECT-TYPE SYNTAX T11ZoningName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of this Zone. The t11ZsZoneName should be unique within a fabric. The Zone can be renamed by setting this object to a new value." ::= { t11ZsZoneEntry 2 } t11ZsZoneAttribBlock OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the index value of the Zone Attribute Block which contains the Attributes of this Zone. In Enhanced mode, a value of zero indicates this Zone has no Zone Attributes. In Basic mode, this object always has the value of zero." ::= { t11ZsZoneEntry 3 } t11ZsZoneRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. This object can not be set to 'active' unless the corresponding value of t11ZsZoneName is unique within the fabric's Zone Server database on this switch." ::= { t11ZsZoneEntry 4 } -- -- Which Zones belong to each Zone Set -- Expires April 2006 [Page 34] Internet Draft FC Zone Server MIB October 2005 t11ZsSetZoneTable OBJECT-TYPE SYNTAX SEQUENCE OF T11ZsSetZoneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies which Zones belong to which Zone Sets in the Zone Set database of the Zone Servers on each fabric in one or more switches." ::= { t11ZsConfiguration 4 } t11ZsSetZoneEntry OBJECT-TYPE SYNTAX T11ZsSetZoneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry specifies that a particular Zone (identified by the value of t11ZsZoneIndex) is one of the Zones which form a particular Zone Set (identified by the value of t11ZsSetIndex) in the Zone Set database of a particular fabric (identified by the value of t11ZsServerFabricIndex) on a particular switch (identified by values of fcmInstanceIndex and fcmSwitchIndex). The StorageType of a row in this table is specified by the instance of t11ZsServerDatabaseStorageType which is INDEX-ed by the same values of fcmInstanceIndex, fcmSwitchIndex and t11ZsServerFabricIndex." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11ZsServerFabricIndex, t11ZsSetIndex, t11ZsZoneIndex } ::= { t11ZsSetZoneTable 1 } T11ZsSetZoneEntry ::= SEQUENCE { t11ZsSetZoneRowStatus RowStatus } t11ZsSetZoneRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row." ::= { t11ZsSetZoneEntry 1 } Expires April 2006 [Page 35] Internet Draft FC Zone Server MIB October 2005 -- -- t11ZsAliasTable -- t11ZsAliasTable OBJECT-TYPE SYNTAX SEQUENCE OF T11ZsAliasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about the Zone Aliases in the Zone Set database of the Zone Servers on each fabric in one or more switches. In Enhanced mode, changes to a database made via this table are always made to the 'copy' database, but values read from this table reflect the contents of either the 'copy' database or the current (committed) database as indicated by the corresponding value of t11ZsServerReadFromDatabase." ::= { t11ZsConfiguration 5 } t11ZsAliasEntry OBJECT-TYPE SYNTAX T11ZsAliasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about a Zone Alias in the Zone Set database of a particular fabric (identified by the value of t11ZsServerFabricIndex) on a particular switch (identified by values of fcmInstanceIndex and fcmSwitchIndex). A Zone Member is added to a Zone Alias by creating an entry in the t11ZsZoneMemberTable pointing to a row of this table via t11ZsAliasIndex, i.e.,: - t11ZsZoneMemberParentType = 'alias', - t11ZsZoneMemberParentIndex = Alias's t11ZsAliasIndex, - t11ZsZoneMemberFormat != '05 - Alias Name', and - t11ZsZoneMemberID = Member's identifier. A Zone Alias is added to a Zone by creating an entry in the t11ZsZoneMemberTable pointing to a row of this table via t11ZsAliasName, i.e.,: Expires April 2006 [Page 36] Internet Draft FC Zone Server MIB October 2005 - t11ZsZoneMemberParentType = 'zone', and - t11ZsZoneMemberParentIndex = Zone's t11ZsZoneIndex, - t11ZsZoneMemberFormat = '05 - Alias Name', - t11ZsZoneMemberID = Alias's t11ZsAliasName. The StorageType of a row in this table is specified by the instance of t11ZsServerDatabaseStorageType which is INDEX-ed by the same values of fcmInstanceIndex, fcmSwitchIndex and t11ZsServerFabricIndex." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11ZsServerFabricIndex, t11ZsAliasIndex } ::= { t11ZsAliasTable 1 } T11ZsAliasEntry ::= SEQUENCE { t11ZsAliasIndex Unsigned32, t11ZsAliasName T11ZoningName, t11ZsAliasRowStatus RowStatus } t11ZsAliasIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value which uniquely identifies this Zone Alias within the Zone Set database of a particular fabric on a particular switch." ::= { t11ZsAliasEntry 1 } t11ZsAliasName OBJECT-TYPE SYNTAX T11ZoningName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of this Zone Alias. The name of the Zone Alias should be unique within a fabric. The Zone Alias can be renamed by setting this object to a new value if and when it is not in a Zone, i.e., if and only if the current name is not the value of any t11ZsZoneMemberID in the same Zone Set database." ::= { t11ZsAliasEntry 2 } t11ZsAliasRowStatus OBJECT-TYPE SYNTAX RowStatus Expires April 2006 [Page 37] Internet Draft FC Zone Server MIB October 2005 MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. This object can not be set to 'active' unless the corresponding value of t11ZsAliasName is unique within the fabric's Zone Server database on this switch." ::= { t11ZsAliasEntry 3 } -- -- t11ZsZoneMemberTable -- t11ZsZoneMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF T11ZsZoneMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all members of a Zone/Zone Alias and information about those members in the Zone Set database of the Zone Servers on each fabric in one or more switches. In Enhanced mode, changes to a database made via this table are always made to the 'copy' database, but values read from this table reflect the contents of either the 'copy' database or the current (committed) database as indicated by the corresponding value of t11ZsServerReadFromDatabase." ::= { t11ZsConfiguration 6 } t11ZsZoneMemberEntry OBJECT-TYPE SYNTAX T11ZsZoneMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents the relationship between a member and (one of) its 'parent(s)', i.e., a Zone or Zone Alias to which the member belongs, within a particular fabric (identified by the value of t11ZsServerFabricIndex) on a particular switch (identified by values of fcmInstanceIndex and fcmSwitchIndex). Expires April 2006 [Page 38] Internet Draft FC Zone Server MIB October 2005 A Zone member (other than an alias) is added to a Zone by creating an entry in this table having: - t11ZsZoneMemberParentType = 'zone', and - t11ZsZoneMemberParentIndex = Zone's t11ZsZoneIndex, - t11ZsZoneMemberFormat != '05 - Alias Name', - t11ZsZoneMemberID = Member's identifier. The StorageType of a row in this table is specified by the instance of t11ZsServerDatabaseStorageType which is INDEX-ed by the same values of fcmInstanceIndex, fcmSwitchIndex and t11ZsServerFabricIndex." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11ZsServerFabricIndex, t11ZsZoneMemberParentType, t11ZsZoneMemberParentIndex, t11ZsZoneMemberIndex } ::= { t11ZsZoneMemberTable 1 } T11ZsZoneMemberEntry ::= SEQUENCE { t11ZsZoneMemberParentType INTEGER, t11ZsZoneMemberParentIndex Unsigned32, t11ZsZoneMemberIndex Unsigned32, t11ZsZoneMemberFormat T11ZsZoneMemberType, t11ZsZoneMemberID OCTET STRING, t11ZsZoneMemberRowStatus RowStatus } t11ZsZoneMemberParentType OBJECT-TYPE SYNTAX INTEGER { zone(1), -- member belongs to a Zone alias(2) -- member belongs to a Zone Alias } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object determines whether this member belongs to a Zone or an Zone Alias." ::= { t11ZsZoneMemberEntry 1 } t11ZsZoneMemberParentIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the index value of the Zone or Zone Alias to which this member belongs. Expires April 2006 [Page 39] Internet Draft FC Zone Server MIB October 2005 If the value of the corresponding instance of t11ZsZoneMemberParentType is 'zone', then this object will contain the value of the t11ZsZoneIndex object of the Zone to which this member belongs. If the value of the corresponding instance of t11ZsZoneMemberParentType is 'alias', then this object will contain the value of the t11ZsAliasIndex object of the Zone Alias to which this member belongs." ::= { t11ZsZoneMemberEntry 2 } t11ZsZoneMemberIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value which uniquely identifies this Zone Member amongst all Zone Members in the Zone Set database of a particular fabric on a particular switch." ::= { t11ZsZoneMemberEntry 3 } t11ZsZoneMemberFormat OBJECT-TYPE SYNTAX T11ZsZoneMemberType MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the format of the Zone/Zone Alias member's identifier contained in t11ZsZoneMemberID. This object can not be modified while the corresponding value of t11ZsZoneMemberRowStatus object is 'active'." ::= { t11ZsZoneMemberEntry 4 } t11ZsZoneMemberID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the Member Identifier of the Zone or Alias. The interpretation of this object depends on the value of the corresponding instance of t11ZsZoneMemberFormat: - if t11ZsZoneMemberFormat is 'N_Port_Name', then Expires April 2006 [Page 40] Internet Draft FC Zone Server MIB October 2005 this object contains a N_Port_Name. - if t11ZsZoneMemberFormat is 'Domain_ID and physical port', then this object contains a 4-octet value in network-byte order. The first octet is zero, the second octet contains the Domain_ID, and the last two octets contain the physical port number. - if t11ZsZoneMemberFormat is 'N_Port_ID', then this object contains the 3-octet Nx_Port FC_ID. - if t11ZsZoneMemberFormat is 'Alias Name', then this object contains the value of t11ZsAliasName for some Alias in the same Zone Set database. - if t11ZsZoneMemberFormat is 'Node_Name', then this object contains an 8-octet Node_Name. - if t11ZsZoneMemberFormat is 'F_Port_Name', then this object contains an 8-octet F_Port_Name. - if t11ZsZoneMemberFormat is one of the 'Vendor Specific' values, then this object contains a 1 to 255 octet value in a format defined by the relevant vendor. This object cannot be modified while the corresponding value of t11ZsZoneMemberRowStatus object is 'active'." ::= { t11ZsZoneMemberEntry 5 } t11ZsZoneMemberRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. The corresponding instances of t11ZsZoneMemberID and t11ZsZoneMemberFormat objects MUST be set before or concurrently with setting this object to 'active'." ::= { t11ZsZoneMemberEntry 6 } -- -- t11ZsAttribBlockTable -- Expires April 2006 [Page 41] Internet Draft FC Zone Server MIB October 2005 t11ZsAttribBlockTable OBJECT-TYPE SYNTAX SEQUENCE OF T11ZsAttribBlockEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table gives information on all the Zone Attributes in the Zone Set database of the Zone Servers on each fabric in one or more switches. In Enhanced mode, changes to a database made via this table are always made to the 'copy' database, but values read from this table reflect the contents of either the 'copy' database or the current (committed) database as indicated by the corresponding value of t11ZsServerReadFromDatabase." ::= { t11ZsConfiguration 7 } t11ZsAttribBlockEntry OBJECT-TYPE SYNTAX T11ZsAttribBlockEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about a Zone Attribute Block (of Zone Attributes) in the Zone Set database of a particular fabric (identified by the value of t11ZsServerFabricIndex) on a particular switch (identified by values of fcmInstanceIndex and fcmSwitchIndex). Deleting an entry in this table deletes all associated entries in the t11ZsAttribTable. The StorageType of a row in this table is specified by the instance of t11ZsServerDatabaseStorageType which is INDEX-ed by the same values of fcmInstanceIndex, fcmSwitchIndex and t11ZsServerFabricIndex." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11ZsServerFabricIndex, t11ZsAttribBlockIndex } ::= { t11ZsAttribBlockTable 1 } T11ZsAttribBlockEntry ::= SEQUENCE { t11ZsAttribBlockIndex Unsigned32, t11ZsAttribBlockName T11ZoningName, t11ZsAttribBlockRowStatus RowStatus } Expires April 2006 [Page 42] Internet Draft FC Zone Server MIB October 2005 t11ZsAttribBlockIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value which uniquely identifies this Zone Attribute within the Zone Set database of a particular fabric on a particular switch." ::= { t11ZsAttribBlockEntry 1 } t11ZsAttribBlockName OBJECT-TYPE SYNTAX T11ZoningName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of this Zone Attribute Block, which should be unique within the fabric." ::= { t11ZsAttribBlockEntry 2 } t11ZsAttribBlockRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row." ::= { t11ZsAttribBlockEntry 3 } -- -- t11ZsAttribTable -- t11ZsAttribTable OBJECT-TYPE SYNTAX SEQUENCE OF T11ZsAttribEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table gives information on the Zone Attributes within the Zone Attribute Blocks in the Zone Set database of the Zone Servers on each fabric in one or more switches. In Enhanced mode, changes to a database made via this table are always made to the 'copy' database, but values read from this table reflect the contents of either the 'copy' database or the current (committed) Expires April 2006 [Page 43] Internet Draft FC Zone Server MIB October 2005 database as indicated by the corresponding value of t11ZsServerReadFromDatabase." ::= { t11ZsConfiguration 8 } t11ZsAttribEntry OBJECT-TYPE SYNTAX T11ZsAttribEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about a Zone Attribute in a Zone Attribute Block (identified by t11ZsAttribBlockIndex) in the Zone Set database of a particular fabric (identified by the value of t11ZsServerFabricIndex) on a particular switch (identified by values of fcmInstanceIndex and fcmSwitchIndex). An entry in this table cannot be created prior to its associated entry in the t11ZsAttribBlockTable. The StorageType of a row in this table is specified by the instance of t11ZsServerDatabaseStorageType which is INDEX-ed by the same values of fcmInstanceIndex, fcmSwitchIndex and t11ZsServerFabricIndex." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11ZsServerFabricIndex, t11ZsAttribBlockIndex, t11ZsAttribIndex } ::= { t11ZsAttribTable 1 } T11ZsAttribEntry ::= SEQUENCE { t11ZsAttribIndex Unsigned32, t11ZsAttribType Unsigned32, t11ZsAttribValue OCTET STRING, t11ZsAttribRowStatus RowStatus } t11ZsAttribIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value which uniquely identifies this Zone Attribute within its Zone Attribute Block in the Zone Set database of a particular fabric on a particular switch." Expires April 2006 [Page 44] Internet Draft FC Zone Server MIB October 2005 ::= { t11ZsAttribEntry 1 } t11ZsAttribType OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The type of attribute: 0001 - Protocol 0002 - Broadcast Zone 0003 - Hard Zone 00E0 (hex) - Vendor Specific." REFERENCE "ANSI INCITS xxx/200x, T11/Project 1677-D/Rev 8.00, Fibre Channel - Generic Services-5 (FC-GS-5), 17 September 2004, section 6.4.8.3.8." ::= { t11ZsAttribEntry 2 } t11ZsAttribValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the attribute, formatted as specified in FC-GS-5 for the type given by the corresponding instance of t11ZsAttribType." REFERENCE "ANSI INCITS xxx/200x, T11/Project 1677-D/Rev 8.00, Fibre Channel - Generic Services-5 (FC-GS-5), 17 September 2004, section 6.4.8.3.8." ::= { t11ZsAttribEntry 3 } t11ZsAttribRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row." ::= { t11ZsAttribEntry 4 } -- -- Activating a Zone Set -- Expires April 2006 [Page 45] Internet Draft FC Zone Server MIB October 2005 t11ZsActivateTable OBJECT-TYPE SYNTAX SEQUENCE OF T11ZsActivateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides a mechanism to allow a Zone Set to be activated on a fabric." ::= { t11ZsConfiguration 9 } t11ZsActivateEntry OBJECT-TYPE SYNTAX T11ZsActivateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry reflects the state of the activation of a Zone Set by a particular switch (identified by values of fcmInstanceIndex and fcmSwitchIndex) on a particular fabric (identified by the value of t11ZsServerFabricIndex)." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11ZsServerFabricIndex } ::= { t11ZsActivateTable 1 } T11ZsActivateEntry ::= SEQUENCE { t11ZsActivate Unsigned32, t11ZsActivateDeactivate INTEGER, t11ZsActivateResult INTEGER, t11ZsActivateFailCause SnmpAdminString, t11ZsActivateFailDomainId FcDomainIdOrZero } t11ZsActivate OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to a value is a request for a Zone Set to be activated on the fabric which is represented by this row. The Zone Set to be activated is the one for which t11ZsSetIndex has the same value. If a Zone Set is already active on a fabric when a request is made to activate a different one on that fabric, then the existing Zone Set is automatically Expires April 2006 [Page 46] Internet Draft FC Zone Server MIB October 2005 deactivated and the specified Zone Set is activated in instead. The value of this object when read is always 0." ::= { t11ZsActivateEntry 1 } t11ZsActivateDeactivate OBJECT-TYPE SYNTAX INTEGER { deactivate(1), noop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to 'deactivate' is a request to deactivate the currently active Zone Set on a fabric. No action is taken if this object is set to 'noop'. When read, the value of this object is always 'noop'." ::= { t11ZsActivateEntry 2 } t11ZsActivateResult OBJECT-TYPE SYNTAX INTEGER { activateSuccess(1), activateFailure(2), deactivateSuccess(3), deactivateFailure(4), inProgress(5), none(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the outcome of the most recent activation/deactivation using this entry. When the value of this object is 'inProgress', the values of the corresponding instances of t11ZsActivate and t11ZsSetDeActivate cannot be modified. The value 'none' indicates activation/de-activation has not been attempted." ::= { t11ZsActivateEntry 3 } Expires April 2006 [Page 47] Internet Draft FC Zone Server MIB October 2005 t11ZsActivateFailCause OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual message indicating the reason for the most recent failure of a Zone Set activation or de-activation, or the zero-length string if no information is available. When the corresponding instance of t11ZsActivateResult is either 'activateFailure' or 'deactivateFailure', the value of this object indicates the reason for that failure." ::= { t11ZsActivateEntry 4 } t11ZsActivateFailDomainId OBJECT-TYPE SYNTAX FcDomainIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "If the failure cause (as indicated by t11ZsSetFailCause) was specific to a particular device, this object contains the Domain_ID of that device. Otherwise, this object contains zero." ::= { t11ZsActivateEntry 5 } -- -- The Active/Enforced Zone Sets -- t11ZsActiveTable OBJECT-TYPE SYNTAX SEQUENCE OF T11ZsActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information on the currently enforced/active Zone Set on each fabric. An active Zone Set cannot be modified. This table will be empty when no Zone Set is activated." ::= { t11ZsConfiguration 10 } t11ZsActiveEntry OBJECT-TYPE SYNTAX T11ZsActiveEntry Expires April 2006 [Page 48] Internet Draft FC Zone Server MIB October 2005 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents an active Zone Set of a particular fabric (identified by the value of t11ZsServerFabricIndex), according to a particular switch (identified by values of fcmInstanceIndex and fcmSwitchIndex)." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11ZsServerFabricIndex } ::= { t11ZsActiveTable 1 } T11ZsActiveEntry ::= SEQUENCE { t11ZsActiveZoneSetName T11ZoningName, t11ZsActiveActivateTime TimeStamp } t11ZsActiveZoneSetName OBJECT-TYPE SYNTAX T11ZoningName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of this Zone Set on this fabric." ::= { t11ZsActiveEntry 1 } t11ZsActiveActivateTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at which this entry was most recently activated. If this row was activated prior to the last re-initialization of the local network management system, then this object will contain a zero value." ::= { t11ZsActiveEntry 2 } -- -- Zones in the Active/Enforced Zone Set -- t11ZsActiveZoneTable OBJECT-TYPE SYNTAX SEQUENCE OF T11ZsActiveZoneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION Expires April 2006 [Page 49] Internet Draft FC Zone Server MIB October 2005 "This table contains all the Zones that are present in the active Zone Sets on all fabrics." ::= { t11ZsConfiguration 11 } t11ZsActiveZoneEntry OBJECT-TYPE SYNTAX T11ZsActiveZoneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a Zone in the active Zone Set of a particular fabric (identified by the value of t11ZsServerFabricIndex), according to a particular switch (identified by values of fcmInstanceIndex and fcmSwitchIndex)." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11ZsServerFabricIndex, t11ZsActiveZoneIndex } ::= { t11ZsActiveZoneTable 1 } T11ZsActiveZoneEntry ::= SEQUENCE { t11ZsActiveZoneIndex Unsigned32, t11ZsActiveZoneName T11ZoningName, t11ZsActiveBroadcast TruthValue, t11ZsActiveHardZoning TruthValue } t11ZsActiveZoneIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value which uniquely identifies this this Zone within the active Zone Set on a particular fabric." ::= { t11ZsActiveZoneEntry 1 } t11ZsActiveZoneName OBJECT-TYPE SYNTAX T11ZoningName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of this Zone." ::= { t11ZsActiveZoneEntry 2 } t11ZsActiveBroadcast OBJECT-TYPE SYNTAX TruthValue Expires April 2006 [Page 50] Internet Draft FC Zone Server MIB October 2005 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether broadcast Zoning is enabled on this Zone. If broadcast Zoning is enabled, then broadcast frames generated by a member in this Zone will be restricted to members in this Zone. This object is only instantiated in Enhanced mode." ::= { t11ZsActiveZoneEntry 3 } t11ZsActiveHardZoning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether hard Zoning is enabled on this Zone. This object is only instantiated in Enhanced mode." ::= { t11ZsActiveZoneEntry 4 } -- -- Zone Members in the Active/Enforced Zone Set -- t11ZsActiveZoneMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF T11ZsActiveZoneMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all members of all Zones within the active Zone Set on any fabric." ::= { t11ZsConfiguration 12 } t11ZsActiveZoneMemberEntry OBJECT-TYPE SYNTAX T11ZsActiveZoneMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a member of a Zone in the active Zone Set of a particular fabric (identified by the value t11ZsServerFabricIndex), according to a particular switch (identified by values of fcmInstanceIndex and fcmSwitchIndex)." Expires April 2006 [Page 51] Internet Draft FC Zone Server MIB October 2005 INDEX { fcmInstanceIndex, fcmSwitchIndex, t11ZsServerFabricIndex, t11ZsActiveZoneIndex, t11ZsActiveZoneMemberIndex } ::= { t11ZsActiveZoneMemberTable 1 } T11ZsActiveZoneMemberEntry ::= SEQUENCE { t11ZsActiveZoneMemberIndex Unsigned32, t11ZsActiveZoneMemberFormat T11ZsZoneMemberType, t11ZsActiveZoneMemberID OCTET STRING } t11ZsActiveZoneMemberIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value which uniquely identifies this member amongst the members of a particular Zone in the active Zone Set on a particular fabric." ::= { t11ZsActiveZoneMemberEntry 1 } t11ZsActiveZoneMemberFormat OBJECT-TYPE SYNTAX T11ZsZoneMemberType MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the identifier format of the corresponding instance of t11ZsActiveZoneMemberID." ::= { t11ZsActiveZoneMemberEntry 2 } t11ZsActiveZoneMemberID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This value of this object identifies the member using the format specified in the corresponding instance of t11ZsActiveZoneMemberFormat." ::= { t11ZsActiveZoneMemberEntry 3 } -- -- Zone Attributes in the Active/Enforced Zone Set -- t11ZsActiveAttribTable OBJECT-TYPE Expires April 2006 [Page 52] Internet Draft FC Zone Server MIB October 2005 SYNTAX SEQUENCE OF T11ZsActiveAttribEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about some of the Attributes of the Zones within the active Zone Set on each fabric. This table contains all the types of attributes which might apply zero, one, or more times to a Zone. Attributes which apply once and only to a Zone are specified in the t11ZsActiveZoneTable. This table will always empty in Basic mode. It will also be empty if there are no Zones in any active Zone Set having any of the applicable types of attributes." ::= { t11ZsConfiguration 13 } t11ZsActiveAttribEntry OBJECT-TYPE SYNTAX T11ZsActiveAttribEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains an Attribute of a particular Zone in the active Zone Set of a particular fabric (identified by the value of t11ZsServerFabricIndex), according to a particular switch (identified by values of fcmInstanceIndex and fcmSwitchIndex)." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11ZsServerFabricIndex, t11ZsActiveZoneIndex, t11ZsActiveAttribIndex } ::= { t11ZsActiveAttribTable 1 } T11ZsActiveAttribEntry ::= SEQUENCE { t11ZsActiveAttribIndex Unsigned32, t11ZsActiveAttribType Unsigned32, t11ZsActiveAttribValue OCTET STRING } t11ZsActiveAttribIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION Expires April 2006 [Page 53] Internet Draft FC Zone Server MIB October 2005 "An index value which uniquely identifies this attribute amongst the other attributes for a particular Zone in the active Zone Set on a particular fabric." ::= { t11ZsActiveAttribEntry 1 } t11ZsActiveAttribType OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The type of attribute: 0001 - Protocol 00E0 (hex) - Vendor Specific Note that type 2 (Hard) and type 3 (Broadcast) are represented by t11ZsActiveBroadcast and t11ZsActiveHardZoning." REFERENCE "ANSI INCITS xxx/200x, T11/Project 1677-D/Rev 8.00, Fibre Channel - Generic Services-5 (FC-GS-5), 17 September 2004, section 6.4.8.3.8." ::= { t11ZsActiveAttribEntry 2 } t11ZsActiveAttribValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the attribute, formatted according to its type as indicated by the corresponding instance of t11ZsActiveAttribType." REFERENCE "ANSI INCITS xxx/200x, T11/Project 1677-D/Rev 8.00, Fibre Channel - Generic Services-5 (FC-GS-5), 17 September 2004, section 6.4.8.3.8." ::= { t11ZsActiveAttribEntry 3 } -- -- Zone Server Statistics -- t11ZsStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF T11ZsStatsEntry MAX-ACCESS not-accessible Expires April 2006 [Page 54] Internet Draft FC Zone Server MIB October 2005 STATUS current DESCRIPTION "A table of statistics maintained by Zone Servers." ::= { t11ZsStatistics 1 } t11ZsStatsEntry OBJECT-TYPE SYNTAX T11ZsStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of statistics for a Zone Server on a particular fabric (identified by the value of t11ZsServerFabricIndex) on a particular switch (identified by values of fcmInstanceIndex and fcmSwitchIndex)." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11ZsServerFabricIndex } ::= { t11ZsStatsTable 1 } T11ZsStatsEntry ::= SEQUENCE { t11ZsTxMergeRequests Counter32, t11ZsRxMergeAccepts Counter32, t11ZsRxMergeRequests Counter32, t11ZsTxMergeAccepts Counter32, t11ZsTxChangeRequests Counter32, t11ZsRxChangeAccepts Counter32, t11ZsRxChangeRequests Counter32, t11ZsTxChangeAccepts Counter32, t11ZsRxGS5Requests Counter32, t11ZsTxGS5Rejects Counter32 } t11ZsTxMergeRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Merge Request Frames sent by this Zone Server to other Zone Servers in the same fabric. This counter has no discontinuities other than those which all Counter32's have when sysUpTime=0." ::= { t11ZsStatsEntry 1 } t11ZsRxMergeAccepts OBJECT-TYPE Expires April 2006 [Page 55] Internet Draft FC Zone Server MIB October 2005 SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Merge Accept Frames received by this Zone Server from other Zone Servers in the same fabric. This counter has no discontinuities other than those which all Counter32's have when sysUpTime=0." ::= { t11ZsStatsEntry 2 } t11ZsRxMergeRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Merge Request Frames received by this Zone Server from other Zone Servers in the same fabric. This counter has no discontinuities other than those which all Counter32's have when sysUpTime=0." ::= { t11ZsStatsEntry 3 } t11ZsTxMergeAccepts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Merge Accept Frames sent by this Zone Server to other Zone Servers in the same fabric. This counter has no discontinuities other than those which all Counter32's have when sysUpTime=0." ::= { t11ZsStatsEntry 4 } t11ZsTxChangeRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Change Requests sent by this Zone Server to other Zone Servers in the same fabric. This includes Acquire Change Authorization requests, Stage Fabric Config Update requests, Expires April 2006 [Page 56] Internet Draft FC Zone Server MIB October 2005 Update Fabric Config requests and Release Change Authorization requests. This counter has no discontinuities other than those which all Counter32's have when sysUpTime=0." ::= { t11ZsStatsEntry 5 } t11ZsRxChangeAccepts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Change Responses received by this Zone Server from other Zone Servers in the same fabric. This includes Acquire Change Authorization Accept, Stage Fabric Config Update Accept, Update Fabric Config Accept and Release Change Authorization Accept frames. This counter has no discontinuities other than those which all Counter32's have when sysUpTime=0." ::= { t11ZsStatsEntry 6 } t11ZsRxChangeRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Change Requests received by this Zone Server from other Zone Servers in the same fabric. This includes Acquire Change Authorization requests, Stage Fabric Config Update requests, Update Fabric Config requests and Release Change Authorization requests. This counter has no discontinuities other than those which all Counter32's have when sysUpTime=0." ::= { t11ZsStatsEntry 7 } t11ZsTxChangeAccepts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current Expires April 2006 [Page 57] Internet Draft FC Zone Server MIB October 2005 DESCRIPTION "The number of Change Responses sent by this Zone Server to other Zone Servers in the same fabric. This includes Acquire Change Authorization Accept, Stage Fabric Config Update Accept, Update Fabric Config Accept and Release Change Authorization Accept frames. This counter has no discontinuities other than those which all Counter32's have when sysUpTime=0." ::= { t11ZsStatsEntry 8 } t11ZsRxGS5Requests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of GS-5 requests received by this Zone Server on this fabric. This counter has no discontinuities other than those which all Counter32's have when sysUpTime=0." ::= { t11ZsStatsEntry 9 } t11ZsTxGS5Rejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of GS-5 requests rejected by this Zone Server on this fabric. This counter has no discontinuities other than those which all Counter32's have when sysUpTime=0." ::= { t11ZsStatsEntry 10 } -- -- Notification Control Table -- t11ZsNotifyControlTable OBJECT-TYPE SYNTAX SEQUENCE OF T11ZsNotifyControlEntry MAX-ACCESS not-accessible STATUS current Expires April 2006 [Page 58] Internet Draft FC Zone Server MIB October 2005 DESCRIPTION "A table of control information for notifications generated due to Zone Server events." ::= { t11ZsConfiguration 14 } t11ZsNotifyControlEntry OBJECT-TYPE SYNTAX T11ZsNotifyControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains notification control information specific to a Zone Server for a particular fabric (identified by the value of t11ZsServerFabricIndex) on a particular switch (identified by values of fcmInstanceIndex and fcmSwitchIndex)." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11ZsServerFabricIndex } ::= { t11ZsNotifyControlTable 1 } T11ZsNotifyControlEntry ::= SEQUENCE { t11ZsNotifyRequestRejectEnable TruthValue, t11ZsNotifyMergeFailureEnable TruthValue, t11ZsNotifyMergeSuccessEnable TruthValue, t11ZsNotifyDefZoneChangeEnable TruthValue, t11ZsNotifyActivateEnable TruthValue, t11ZsRejectCtCommandString OCTET STRING, t11ZsRejectRequestSource FcNameIdOrZero, t11ZsRejectReasonCode T11NsGs4RejectReasonCode, t11ZsRejectReasonCodeExp T11ZsRejectReasonExplanation } t11ZsNotifyRequestRejectEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether t11ZsRequestRejectNotify notifications should be generated by the Zone Server for this fabric." ::= { t11ZsNotifyControlEntry 1 } t11ZsNotifyMergeFailureEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current Expires April 2006 [Page 59] Internet Draft FC Zone Server MIB October 2005 DESCRIPTION "This object specifies whether t11ZsMergeFailureNotify notifications should be generated by the Zone Server for this fabric." ::= { t11ZsNotifyControlEntry 2 } t11ZsNotifyMergeSuccessEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether t11ZsMergeSuccessNotify notifications should be generated by the Zone Server for this fabric." ::= { t11ZsNotifyControlEntry 3 } t11ZsNotifyDefZoneChangeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether t11ZsDefZoneChangeNotify notifications should be generated by the Zone Server for this fabric." ::= { t11ZsNotifyControlEntry 4 } t11ZsNotifyActivateEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether t11ZsActivateNotify notifications should be generated by the Zone Server for this fabric." ::= { t11ZsNotifyControlEntry 5 } t11ZsRejectCtCommandString OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The binary content of the Zone Server request, formatted as an octet string (in network byte order) containing the CT_IU, as described in Table 2 of [FC-GS-5] (including the preamble), Expires April 2006 [Page 60] Internet Draft FC Zone Server MIB October 2005 which was most recently rejected by the Zone Server for this fabric. This object contains the zero-length string if and when the CT-IU's content is unavailable. When the length of this object is 255 octets, it contains the first 255 octets of the CT-IU (in network-byte order)." ::= { t11ZsNotifyControlEntry 6 } t11ZsRejectRequestSource OBJECT-TYPE SYNTAX FcNameIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The WWN which was the source of the CT_IU contained in the corresponding instance of t11ZsRejectCtCommandString." ::= { t11ZsNotifyControlEntry 7 } t11ZsRejectReasonCode OBJECT-TYPE SYNTAX T11NsGs4RejectReasonCode MAX-ACCESS read-only STATUS current DESCRIPTION "The reason code corresponding to the most recent rejection of a request by the Zone Server for this fabric." ::= { t11ZsNotifyControlEntry 8 } t11ZsRejectReasonCodeExp OBJECT-TYPE SYNTAX T11ZsRejectReasonExplanation MAX-ACCESS read-only STATUS current DESCRIPTION "When the value of t11ZsRejectReasonCode is 'Unable to perform command request', this object contains the corresponding reason code explanation." ::= { t11ZsNotifyControlEntry 9 } t11ZsFabricIndex OBJECT-TYPE SYNTAX Unsigned32 (0..4096) MAX-ACCESS accessible-for-notify Expires April 2006 [Page 61] Internet Draft FC Zone Server MIB October 2005 STATUS current DESCRIPTION "This object contains either a value of T11FabricIndex to identify the fabric on which some occurrence has caused a notification to be generated, or it has the value 4096 to indicate all applicable fabrics." ::= { t11ZsConfiguration 15 } -- Notifications t11ZsRequestRejectNotify NOTIFICATION-TYPE OBJECTS { t11FamLocalSwitchWwn, t11ZsRejectRequestSource, t11ZsRejectCtCommandString, t11ZsRejectReasonCode, t11ZsRejectReasonCodeExp } STATUS current DESCRIPTION "This notification is generated whenever a Zone Server (indicated by the value of t11FamLocalSwitchWwn) rejects a request. The value of t11ZsRejectCtCommandString indicates the rejected request, and the values of t11ZsRejectReasonCode and t11ZsRejectReasonCodeExp indicate the reason for the rejection. The value of t11ZsRequestClient indicates the source of the request." ::= { t11ZsMIBNotifications 1 } t11ZsMergeFailureNotify NOTIFICATION-TYPE OBJECTS { ifIndex, t11ZsFabricIndex } STATUS current DESCRIPTION "This notification indicates that a Zone merge failure has occurred on the Fabric indicated by the value of t11ZsFabricIndex, on the interface indicated by the value of ifIndex. If multiple Virtual Fabrics are configured on an interface, and all have a Zone merge failure at the same time, then just one notification is generated and t11ZsFabricIndex has the value 4096." ::= { t11ZsMIBNotifications 2 } Expires April 2006 [Page 62] Internet Draft FC Zone Server MIB October 2005 t11ZsMergeSuccessNotify NOTIFICATION-TYPE OBJECTS { ifIndex, t11ZsFabricIndex } STATUS current DESCRIPTION "This notification indicates that a successful Zone merge has occurred on the Fabric indicated by the value of t11ZsFabricIndex, on the interface indicated by the value of ifIndex. If multiple Virtual Fabrics are configured on an interface, and all have a successful Zone Merge at the same time, then just one notification is generated and t11ZsFabricIndex has the value 4096." ::= { t11ZsMIBNotifications 3 } t11ZsDefZoneChangeNotify NOTIFICATION-TYPE OBJECTS { t11ZsServerDefaultZoneSetting } STATUS current DESCRIPTION "This notification indicates that the value of a Default Zone Setting has changed. The value of t11ZsServerDefaultZoneSetting contains the value after the change." ::= { t11ZsMIBNotifications 4 } t11ZsActivateNotify NOTIFICATION-TYPE OBJECTS { t11FamLocalSwitchWwn, t11ZsActivateResult } STATUS current DESCRIPTION "This notification is generated whenever a switch (indicated by the value of t11FamLocalSwitchWwn) activates/deactivates a Zone Set on a fabric. The t11ZsActivateResult object denotes the outcome of the activation/deactivation." ::= { t11ZsMIBNotifications 5 } -- Conformance t11ZsMIBCompliances OBJECT IDENTIFIER ::= { t11ZsMIBConformance 1 } t11ZsMIBGroups OBJECT IDENTIFIER ::= { t11ZsMIBConformance 2 } t11ZsMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which Expires April 2006 [Page 63] Internet Draft FC Zone Server MIB October 2005 implement the Zone Server." MODULE MANDATORY-GROUPS {t11ZsBasicGroup, t11ZsNotificationControlGroup, t11ZsNotificationGroup } GROUP t11ZsEnhancedModeGroup DESCRIPTION "This group is mandatory only for those systems with Zone Servers which support Enhanced Mode." GROUP t11ZsActivateGroup DESCRIPTION "Only entities that provide write access for activating a Zone Set support need to support this group." GROUP t11ZsStatisticsGroup DESCRIPTION "These counters, containing Zone Server statistics, are mandatory only for those systems which count such events." OBJECT t11ZsSetRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsZoneRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsSetZoneRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsAliasRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required." Expires April 2006 [Page 64] Internet Draft FC Zone Server MIB October 2005 OBJECT t11ZsZoneMemberRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsAttribBlockRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsAttribRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsServerDatabaseStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsServerDistribute MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsServerReadFromDatabase MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsServerOperationMode MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsServerDefaultZoneSetting MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsServerMergeControlSetting MIN-ACCESS read-only Expires April 2006 [Page 65] Internet Draft FC Zone Server MIB October 2005 DESCRIPTION "Write access is not required." OBJECT t11ZsServerDefZoneBroadcast MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsSetName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsZoneName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsZoneAttribBlock MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsAliasName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsZoneMemberFormat MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsZoneMemberID MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsAttribBlockName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsAttribType MIN-ACCESS read-only Expires April 2006 [Page 66] Internet Draft FC Zone Server MIB October 2005 DESCRIPTION "Write access is not required." OBJECT t11ZsAttribValue MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsActivate MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsActivateDeactivate MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsNotifyRequestRejectEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsNotifyMergeFailureEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsNotifyMergeSuccessEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsNotifyDefZoneChangeEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11ZsNotifyActivateEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { t11ZsMIBCompliances 1 } Expires April 2006 [Page 67] Internet Draft FC Zone Server MIB October 2005 -- Units of Conformance t11ZsBasicGroup OBJECT-GROUP OBJECTS { t11ZsServerCapabilityObject, t11ZsServerDatabaseStorageType, t11ZsServerDistribute, t11ZsServerDistributeResult, t11ZsServerDistributeFailReason, t11ZsServerLastChange, t11ZsServerHardZoning, t11ZsServerReadFromDatabase, t11ZsServerOperationMode, t11ZsSetName, t11ZsSetRowStatus, t11ZsZoneName, t11ZsZoneAttribBlock, t11ZsZoneRowStatus, t11ZsSetZoneRowStatus, t11ZsZoneMemberFormat, t11ZsZoneMemberID, t11ZsZoneMemberRowStatus, t11ZsActiveZoneSetName, t11ZsActiveActivateTime, t11ZsActiveZoneName, t11ZsActiveZoneMemberFormat, t11ZsActiveZoneMemberID } STATUS current DESCRIPTION "A collection of objects for displaying and updating the Zone configuration of a Zone Server capable of operating in Basic mode." ::= { t11ZsMIBGroups 1 } t11ZsEnhancedModeGroup OBJECT-GROUP OBJECTS { t11ZsServerChangeModeResult, t11ZsServerDefaultZoneSetting, t11ZsServerMergeControlSetting, t11ZsServerDefZoneBroadcast, t11ZsAliasName, t11ZsAliasRowStatus, t11ZsAttribBlockName, t11ZsAttribBlockRowStatus, t11ZsAttribType, t11ZsAttribValue, Expires April 2006 [Page 68] Internet Draft FC Zone Server MIB October 2005 t11ZsAttribRowStatus, t11ZsActiveBroadcast, t11ZsActiveHardZoning, t11ZsActiveAttribType, t11ZsActiveAttribValue } STATUS current DESCRIPTION "A collection of additional objects for displaying and updating the Zone configuration of a Zone Server capable of operating in Enhanced mode." ::= { t11ZsMIBGroups 2 } t11ZsStatisticsGroup OBJECT-GROUP OBJECTS { t11ZsTxMergeRequests, t11ZsRxMergeAccepts, t11ZsRxMergeRequests, t11ZsTxMergeAccepts, t11ZsTxChangeRequests, t11ZsRxChangeAccepts, t11ZsRxChangeRequests, t11ZsTxChangeAccepts, t11ZsRxGS5Requests, t11ZsTxGS5Rejects } STATUS current DESCRIPTION "A collection of objects for collecting the Zone Server statistics information." ::= { t11ZsMIBGroups 3 } t11ZsNotificationControlGroup OBJECT-GROUP OBJECTS { t11ZsNotifyRequestRejectEnable, t11ZsNotifyMergeFailureEnable, t11ZsNotifyMergeSuccessEnable, t11ZsNotifyDefZoneChangeEnable, t11ZsNotifyActivateEnable, t11ZsRejectCtCommandString, t11ZsRejectRequestSource, t11ZsRejectReasonCode, t11ZsRejectReasonCodeExp, t11ZsFabricIndex } STATUS current DESCRIPTION Expires April 2006 [Page 69] Internet Draft FC Zone Server MIB October 2005 "A collection of notification control and notification information objects for monitoring Zone Server request rejection and Zone merge failures." ::= { t11ZsMIBGroups 4 } t11ZsActivateGroup OBJECT-GROUP OBJECTS { t11ZsActivate, t11ZsActivateDeactivate, t11ZsActivateResult, t11ZsActivateFailCause, t11ZsActivateFailDomainId } STATUS current DESCRIPTION "A collection of objects which allow a Zone Set to be activated via SNMP SetRequests and provide the status and result of such an activation." ::= { t11ZsMIBGroups 5 } t11ZsNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { t11ZsRequestRejectNotify, t11ZsMergeFailureNotify, t11ZsMergeSuccessNotify, t11ZsDefZoneChangeNotify, t11ZsActivateNotify } STATUS current DESCRIPTION "A collection of notification(s) for monitoring Zone Server request rejection, Zone merge failures and successes and Default Zoning behavioural changes." ::= { t11ZsMIBGroups 6 } END Expires April 2006 [Page 70] Internet Draft FC Zone Server MIB October 2005 8. Intellectual Property "The IETF takes no position regarding the validity or scope of any intellectual property or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; neither does it represent that it has made any effort to identify any such rights. Information on the IETF's procedures with respect to rights in standards-track and standards-related documentation can be found in BCP-11. Copies of claims of rights made available for publication and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementors or users of this specification can be obtained from the IETF Secretariat." "The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights which may cover technology that may be required to practice this standard. Please address the information to the IETF Executive Director." 9. Acknowledgements This document is a work item of the INCITS Task Group T11.5. We wish to acknowledge the contributions and comments from the INCITS Technical Committee T11, including the following: T11 Chair: Robert Snively, Brocade T11 Vice Chair: Claudio DeSanti, Cisco Systems T11.5 Chair: Roger Cummings, Symantec and T11.5 members, especially Scott Kipp, McData. Expires April 2006 [Page 71] Internet Draft FC Zone Server MIB October 2005 10. Normative References [RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. [RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999. [RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999. [RFC2863] McCloghrie, K., and F. Kastenholz, "The Interfaces Group MIB", RFC 2863, June 2000. [RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for Describing Simple Network Management Protocol (SNMP) Management Frameworks", STD 58, RFC 3411, December 2002. [FC-GS-5] "Fibre Channel - GENERIC SERVICES - 5 (FC-GS-5)", ANSI NCITS xxx- xxxx, T11/Project 1677-D/Rev 8.00, 17 September 2004. [FC-SW-4] "Fibre Channel - Switch Fabric - 4 (FC-SW-4)", ANSI NCITS xxx-xxxx, T11/Project 1674-D/Rev 7.4, May 2005. [FC-MGMT] K. McCloghrie, "Fibre Channel Management MIB", Internet-Draft (draft-ietf-ips-fcmgmt-mib-nn.txt), work-in-progress. [FC-FAM-MIB] DeSanti, C., Gaonkar, V., McCloghrie, K., and S. Gai, "Fibre- Channel Fabric Address Manager MIB", Internet-Draft (draft-ietf- imss-fc-fam-mib-nn.txt), work-in-progress. [FC-NS-MIB] DeSanti, C., Gaonkar, V., Vivek, H., McCloghrie, K., and S. Gai, Expires April 2006 [Page 72] Internet Draft FC Zone Server MIB October 2005 "Fibre-Channel Name Server MIB", Internet-Draft (draft-ietf-imss- fc-nsm-mib-nn.txt), work-in-progress. 11. Informative References [RFC2741] Daniele, M., Wijnen, B., Ellison, M., and D. Francisco, "Agent Extensibility (AgentX) Protocol Version 1", RFC 2741, January 2000. [RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart, "Introduction and Applicability Statements for Internet- Standard Management Framework", RFC 3410, December 2002. [FC-FS] "Fibre Channel - Framing and Signaling (FC-FS)" ANSI INCITS 373-2003, April 2003. 12. IANA Considerations IANA is requested to make a MIB OID assignment for the T11-ZONE- SERVER-MIB module under the appropriate subtree. 13. Security Considerations There are many management objects defined in these MIB modules with a MAX-ACCESS clause of read-write and/or read-create. Such objects may be considered sensitive or vulnerable in some network environments. The support for SET operations in a non-secure environment without proper protection can have a negative effect on network operations. Specifically, unauthorized write access to any of the writable objects could cause unauthorized manipulation of the Zoning information on a Zone Server, and/or the activation of an unauthorized Active Zone Set in a Fabric. This could result in: allowing unauthorized connectivity, and/or denying authorized connectivity, between hosts connected to the Fibre Channel network. Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments. It is thus important to control even GET and/or NOTIFY access to these objects and possibly to even encrypt the values of these objects when sending them over Expires April 2006 [Page 73] Internet Draft FC Zone Server MIB October 2005 the network via SNMP. Unauthorized read access to any of the readable objects in the t11ZsServerTable, t11ZsActiveZoneTable, t11ZsActiveZoneMemberTable, or t11ZsActiveAttribTable tables would reveal information about the currently authorized connectivity between hosts connected to the Fibre Channel network. Unauthorized read access to any of the readable objects in the t11ZsSetTable, t11ZsZoneTable, t11ZsSetZoneTable, t11ZsAliasTable, t11ZsZoneMemberTable, t11ZsAttribBlockTable or t11ZsAttribTable tables would reveal information about potential/alternative connectivity which could be authorized between hosts connected to the Fibre Channel network. SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPSec), even then, there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB module. It is RECOMMENDED that implementors consider the security features as provided by the SNMPv3 framework (see [RFC3410], section 8), including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy). Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them. Expires April 2006 [Page 74] Internet Draft FC Zone Server MIB October 2005 14. Authors' Addresses Claudio DeSanti Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA Phone: +1 408 853-9172 EMail: cds@cisco.com H.K. Vivek Cisco Systems, Inc. 71 Millers Rd Bangalore, India Phone: +91 80 2289933x5117 EMail: hvivek@cisco.com Keith McCloghrie Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA USA 95134 Phone: +1 408-526-5260 Email: kzm@cisco.com Silvano Gai Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA USA 95134 Phone: +1 408-526-7269 Email: sgai@cisco.com Full Copyright Statement Copyright (C) The Internet Society (2005). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Disclaimer of validity Expires April 2006 [Page 75] Internet Draft FC Zone Server MIB October 2005 The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Acknowledgment Funding for the RFC Editor function is currently provided by the Internet Society. Expires April 2006 [Page 76]