Re: [Adslmib] [Technical Errata Reported] RFC3728 (1791)

["Romascanu, Dan (Dan)" <dromasca at avaya.com>]

Based on the previous discussions, unless I hear any objections in the
next 24 hours I will approve this Errata Report by entering it in
Verified state. 

Dan


> -----Original Message-----
> From: RFC Errata System [mailto:rfc-editor at rfc-editor.org] 
> Sent: Wednesday, June 03, 2009 2:04 PM
> To: rray at pesa.com; Rajesh.Abbi at alcatel.com; Romascanu, Dan 
> (Dan); rbonica at juniper.net; sneedmike at hotmail.com; 
> Menachem.Dodge at ecitele.com
> Cc: smadar_t at rad.com; adslmib at ietf.org; rfc-editor at rfc-editor.org
> Subject: [Technical Errata Reported] RFC3728 (1791)
> 
> 
> The following errata report has been submitted for RFC3728, 
> "Definitions of Managed Objects for Very High Speed Digital 
> Subscriber Lines (VDSL)".
> 
> --------------------------------------
> You may review the report below and at:
> http://www.rfc-editor.org/errata_search.php?rfc=3728&eid=1791
> 
> --------------------------------------
> Type: Technical
> Reported by: Smadar Tauber <smadar_t at rad.com>
> 
> Section: Global
> 
> Original Text
> -------------
> UNITS definition of the following MIB objects, should change 
> from dBm to dB.
> That will also fix the conflict with the units appearing in 
> the Description of these MIB objects (dB).
> 
> vdslPhysCurrSnrMgn
> vdslPhysCurrAtn
> vdslLineConfDownMaxSnrMgn
> vdslLineConfDownMinSnrMgn
> vdslLineConfDownTargetSnrMgn
> vdslLineConfUpMaxSnrMgn
> vdslLineConfUpMinSnrMgn
> vdslLineConfUpTargetSnrMgn
> 
> Example of original text:
>    vdslPhysCurrSnrMgn OBJECT-TYPE
>        SYNTAX       Integer32 (-127..127)
>        UNITS        "0.25dBm"
>        MAX-ACCESS   read-only
>        STATUS       current
>        DESCRIPTION
>            "Noise Margin as seen by this Vtu with respect to its
>            received signal in 0.25dB.  The effective range is
>            -31.75 to +31.75 dB."
>        REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
>         ::= { vdslPhysEntry 5 }
> 
> Corrected Text
> --------------
> Example of corrected text:
>    vdslPhysCurrSnrMgn OBJECT-TYPE
>        SYNTAX       Integer32 (-127..127)
>        UNITS        "0.25dB"
>        MAX-ACCESS   read-only
>        STATUS       current
>        DESCRIPTION
>            "Noise Margin as seen by this Vtu with respect to its
>            received signal in 0.25dB.  The effective range is
>            -31.75 to +31.75 dB."
>        REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
>         ::= { vdslPhysEntry 5 }
> 
> 
> Notes
> -----
> This Errata replaces errata 1788 (rejected because it did not 
> include list of all MIB objects having this problem and could 
> not be edited). 
> It was decided by the adslmib Forum, that the solution should 
> be as described by this Errata.
> 
> Instructions:
> -------------
> This errata is currently posted as "Reported". If necessary, 
> please use "Reply All" to discuss whether it should be 
> verified or rejected. When a decision is reached, the 
> verifying party (IESG) can log in to change the status and 
> edit the report, if necessary. 
> 
> --------------------------------------
> RFC3728 (draft-ietf-adslmib-vdsl-12)
> --------------------------------------
> Title               : Definitions of Managed Objects for Very 
> High Speed Digital Subscriber Lines (VDSL)
> Publication Date    : February 2004
> Author(s)           : B. Ray, R. Abbi
> Category            : PROPOSED STANDARD
> Source              : ADSL MIB
> Area                : Operations and Management
> Stream              : IETF
> Verifying Party     : IESG
>