|
I am fine with this new one.
Bert
----- Original Message -----
Sent: Wednesday, June 03, 2009 1:09
PM
Subject: Re: [Adslmib] [Technical Errata
Reported] RFC3728 (1791)
Based on the previous discussions, unless I hear any objections
in the
next 24 hours I will approve this Errata Report by entering it
in
Verified state.
Dan
> -----Original
Message-----
> From: RFC Errata System
[mailto:rfc-editor at rfc-editor.org]
> Sent: Wednesday, June 03, 2009
2:04 PM
> To: rray at pesa.com; Rajesh.Abbi at alcatel.com; Romascanu,
Dan
> (Dan); rbonica at juniper.net; sneedmike at hotmail.com;
> Menachem.Dodge at ecitele.com
>
Cc: smadar_t at rad.com; adslmib at ietf.org; rfc-editor at rfc-editor.org
>
Subject: [Technical Errata Reported] RFC3728 (1791)
>
>
>
The following errata report has been submitted for RFC3728,
>
"Definitions of Managed Objects for Very High Speed Digital
>
Subscriber Lines (VDSL)".
>
>
--------------------------------------
> You may review the report below
and at:
> http://www.rfc-editor.org/errata_search.php?rfc=3728&eid=1791
>
> --------------------------------------
> Type:
Technical
> Reported by: Smadar Tauber <smadar_t at rad.com>
>
>
Section: Global
>
> Original Text
> -------------
>
UNITS definition of the following MIB objects, should change
> from dBm
to dB.
> That will also fix the conflict with the units appearing in
> the Description of these MIB objects (dB).
>
>
vdslPhysCurrSnrMgn
> vdslPhysCurrAtn
>
vdslLineConfDownMaxSnrMgn
> vdslLineConfDownMinSnrMgn
>
vdslLineConfDownTargetSnrMgn
> vdslLineConfUpMaxSnrMgn
>
vdslLineConfUpMinSnrMgn
> vdslLineConfUpTargetSnrMgn
>
>
Example of original text:
> vdslPhysCurrSnrMgn
OBJECT-TYPE
>
SYNTAX Integer32
(-127..127)
>
UNITS
"0.25dBm"
>
MAX-ACCESS
read-only
>
STATUS
current
>
DESCRIPTION
>
"Noise Margin as seen by this Vtu with respect to
its
>
received signal in 0.25dB. The effective range
is
>
-31.75 to +31.75 dB."
>
REFERENCE "T1E1.4/2000-009R3, Part 1, common
spec"
> ::= {
vdslPhysEntry 5 }
>
> Corrected Text
>
--------------
> Example of corrected text:
>
vdslPhysCurrSnrMgn
OBJECT-TYPE
>
SYNTAX Integer32
(-127..127)
>
UNITS
"0.25dB"
>
MAX-ACCESS
read-only
>
STATUS
current
>
DESCRIPTION
>
"Noise Margin as seen by this Vtu with respect to
its
>
received signal in 0.25dB. The effective range
is
>
-31.75 to +31.75 dB."
>
REFERENCE "T1E1.4/2000-009R3, Part 1, common
spec"
> ::= {
vdslPhysEntry 5 }
>
>
> Notes
> -----
> This
Errata replaces errata 1788 (rejected because it did not
> include list
of all MIB objects having this problem and could
> not be edited).
> It was decided by the adslmib Forum, that the solution should
> be as described by this Errata.
>
>
Instructions:
> -------------
> This errata is currently posted as
"Reported". If necessary,
> please use "Reply All" to discuss whether
it should be
> verified or rejected. When a decision is reached, the
> verifying party (IESG) can log in to change the status and
>
edit the report, if necessary.
>
>
--------------------------------------
> RFC3728
(draft-ietf-adslmib-vdsl-12)
>
--------------------------------------
>
Title
: Definitions of Managed Objects for Very
> High Speed Digital
Subscriber Lines (VDSL)
> Publication Date : February
2004
>
Author(s) : B.
Ray, R. Abbi
>
Category :
PROPOSED STANDARD
>
Source
: ADSL MIB
>
Area
: Operations and Management
>
Stream
: IETF
> Verifying Party : IESG
>
_______________________________________________
Adslmib mailing
list
Adslmib at ietf.org
https://www.ietf.org/mailman/listinfo/adslmib
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus
Database: 270.12.51/2151 - Release Date: 06/02/09
17:53:00
|