[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[alto] Requirements Qs



Title: Requirements Qs

I have been reading draft-ietf-alto-reqs-01.txt and had some questions about the requirements here, particularly from an IPv4/IPv6 transition perspective.

2.2.  ALTO terminology

   o  Host Group Descriptor: This can be, for example, a single IP

      address, an address prefix or address range that contains the

      host(s), or an autonomous system (AS) number.

Q: must  Host Group Descriptor:  be able to include both IPv4 and IPv6 for a dual stack host ?


REQ.  ARv01-8: The ALTO client protocol MUST support the host group

   descriptor types "IPv4 address prefix" and "IPv6 address prefix."

   They can be used to specify the IP address of one host, or an IP

   address range (in CIDR notation), which contains all hosts in

   question.  It is also possible to specify a broader address range

   (i.e., a shorter prefix length) than the intended group of hosts actually uses, in order to conceal their exact identity.

Q:  Is it that “host group descriptor”  is a set of "IPv4 address prefix" or "IPv6 address prefix." Or is it possible that a host group descriptor  is a set containing both "IPv4 address prefix" and "IPv6 address prefix." ?


4.  Host group descriptors

Q: What is the requirement text for section 4?

There are two options listed, the discussion Tuesday seemed to depreciate the AS option. Is it required to support both ? Is one optional ?

Q:ASs have defined semantics. If it is not an AS are there requirements we should be stating about the creation/ deletion / definition of PIDs ? ( e.g. who can do it, when, etc.)

5.  Rating criteria

Q: What is the requirement text for section 4?

Q:If the intention is to support dual (IPv4/IPv6) stack hosts, would there be a need to be able to use these rating criteria to express a preference between them ?

regards,
Steven Wright, MBA,PhD.
Strategic Standards
AT&T Network Architecture
phone (404) 499 7030
fax (404) 986 6141
email steven.wright.3 at att.com

*****

The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential, proprietary, and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from all computers. GA621


Note Well: Messages sent to this mailing list are the opinions of the senders and do not imply endorsement by the IETF.