[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Ecrit] Use of SIPPING config framework for configuring location

John
Or, you can use SIP and not have to implement HELD. HELD doesn't need to go into every device, and I'd be surprised that it ends up in every device. Some devices may end up only supporting SIP, and using the Geolocation header is a fine way of getting either a location URI or a PIDF-LO. 

James

At 01:56 AM 4/2/2009, Elwell, John wrote:

James,

Thanks. That sounds like a good suggestion. We will give it
consideration.

John


> -----Original Message-----
> From: Winterbottom, James [mailto:James.Winterbottom at andrew.com]
> Sent: 02 April 2009 07:34
> To: Elwell, John; ecrit at ietf.org
> Subject: RE: [Ecrit] Use of SIPPING config framework for
> configuring location
>
> John,
>
> If you have to do something in the SIPPING framework then it would be
> far better to provide a LIS URI and then do a HELD look up as
> per Phone
> BCP or framework. This would mean what you are providing is
> another LIS
> discovery technique rather than yet another LCP.
>
> Cheers
> James
>
>
> -----Original Message-----
> From: ecrit-bounces at ietf.org [mailto:ecrit-bounces at ietf.org] On Behalf
> Of Elwell, John
> Sent: Thursday, 2 April 2009 5:07 PM
> To: ecrit at ietf.org
> Subject: [Ecrit] Use of SIPPING config framework for configuring
> location
>
> We had a SIPPING WG ad hoc meeting during IETF 74, in which the SIP
> Forum UA-config work was presented. It aims to provide a
> simple profile
> of the SIPPING configuration framework and datasets.
>
> The question arose whether the configuration data obtained
> from the SIP
> configuration server should have the possibility to contain the
> geographic location of the SIP UA. Effectively this would make it
> another LCP. Does this sound reasonable? Can this be done
> without impact
> on the ECRIT framework and Phone BCP?
>
> John
>
> _______________________________________________
> Ecrit mailing list
> Ecrit at ietf.org
> https://www.ietf.org/mailman/listinfo/ecrit
>
> --------------------------------------------------------------
> ----------------------------------
> This message is for the designated recipient only and may
> contain privileged, proprietary, or otherwise private information.
> If you have received it in error, please notify the sender
> immediately and delete the original.  Any unauthorized use of
> this email is prohibited.
> --------------------------------------------------------------
> ----------------------------------
> [mf2]
>
>
_______________________________________________
Ecrit mailing list
Ecrit at ietf.org
https://www.ietf.org/mailman/listinfo/ecrit