[mpls] draft-dai-mpls-tp-lock-instruct-00

[Sami Boutros <sboutros at cisco.com>]

Hi
Xuehui, Bo, Jian,

The draft seems to cover what we already covered in

http://tools.ietf.org/html/draft-boutros-mpls-tp-loopback-02

4.4.2. Lock

   The Lock operation is used to take an LSP out of service for
mainte-
   nance.  The Lock operation is carried in an MPLS
Loopback request
   message sent from a MEP to a trail-end MEP of the LSP to
request that
   the LSP be taken out of service.  In response, the Lock
operation is
   carried in an Loopback response message sent from the
trail-end MEP
   back to the originating MEP to report the result.


4.4.3. Unlock

   The Unlock operation is used to restore a previously locked
LSP to
   service.  The Unlock operation is carried in an MPLS
Loopback request
   message sent from a MEP to a trail-end MEP of the LSP to
request that
   the LSP be restored to service.  In response, the
Unlock operation is
   carried in an Loopback Response message sent from the
trail-end MEP
   back to the originating MEP to report the result.

Thanks,

Sami