-----Original Message-----
From: JimRoberts [mailto:jr at askonce.net]
Sent: 15 November 2007 06:50
To: pwe3 at ietf.org; akiva at AXERRA.com; Harrison,N,Neil,DMN R
Subject: E1 Framing questionGentlemenI was researching E1 Framing on a Sprint International Private Line going from Portland Oregon to Costa Rica and the effect of taking the framed circuit and passing it through the DACS equipment of the local LEC in Costa Rica which does not support framing and I came across a correspondence you were involved in several years ago.I would very much value your opinion on whether this is a possiblity, ie can framing bits pass through to a CPE device when the local LEC in Costa Rica does not frame the incoming framed E1 from Sprint when they send it out towards the customer equipment.Your input would be very much appreciated.
Jim Roberts - President
Ask Once Communications Inc.
3402 NE 98th Ave. Building # 2
Vancouver, WA 98662
360-883-1800 voice
360-883-1888 fax360-921-8383 Mobilewww.askonce.netAll correspondence contained in this e-mail is consideredconfidential. If you have received this e-mail in errorplease delete it immediately. Thank you.
_______________________________________________ pwe3 mailing list pwe3 at ietf.org https://www1.ietf.org/mailman/listinfo/pwe3