[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Rserpool] Last Call: draft-ietf-rserpool-mib (Reliable ServerPooling: Management Information Base using SMIv2) toExperimental RFC)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Dear all,
attached to this mail you find the updated version of the RSerPool MIB module.
See my comments inline.
> >> - According to RFC4181 this one
> >> rserpoolMIBConformance OBJECT IDENTIFIER ::= { rserpoolMIB 4 }
> >> should change to
> >> rserpoolMIBConformance OBJECT IDENTIFIER ::= { rserpoolMIB 2
> >> }
> >
> > 1 is used for the ENRP servers branch, 2 is used for PE branch, 3 for PU
> > branch. The next available number is 4.
Fixed.
> The normal setup (according to rfc41`81) would be something like:
>
> rserpoolMIBObjects OBJECT-IDENTIFIER ::= { rserpoolMIB 1 }
> rserpoolMIBConformance OBJECT IDENTIFIER ::= { rserpoolMIB 2 }
>
> rserpoolENRPServers OBJECT IDENTIFIER ::= { rserpoolMIBObjects 1 }
> rserpoolPoolElements OBJECT IDENTIFIER ::= { rserpoolMIBObjects 2 }
> rserpoolPoolUsers OBJECT IDENTIFIER ::= { rserpoolMIBObjects 3 }
>
> Your new MIB module has no indertation at all.
> Not a fatal flaw, but does not help in readability.
Fixed.
> The new MIB module causes these SMICng warnings:
> W: f(rserpool.mi2), (137,1) Sequence "RSerPoolENRPEntry" and Row
> "rserpoolENRPEntry" should have related names W: f(rserpool.mi2), (276,1)
> Sequence "RSerPoolENRPPoolEntry" and Row "rserpoolENRPPoolEntry" should
> have related names W: f(rserpool.mi2), (315,1) Sequence
> "RSerPoolENRPPoolElementEntry" and Row "rserpoolENRPPoolElementEntry"
> should have related names W: f(rserpool.mi2), (465,1) Sequence
> "RSerPoolENRPASAPAddrTableEntry" and Row "rserpoolENRPASAPAddrTableEntry"
> should have related names W: f(rserpool.mi2), (520,1) Sequence
> "RSerPoolENRPUserAddrTableEntry" and Row "rserpoolENRPUserAddrTableEntry"
> should have related names W: f(rserpool.mi2), (584,1) Sequence
> "RSerPoolENRPENRPAddrTableEntry" and Row "rserpoolENRPENRPAddrTableEntry"
> should have related names W: f(rserpool.mi2), (636,1) Sequence
> "RSerPoolENRPPeerEntry" and Row "rserpoolENRPPeerEntry" should have related
> names W: f(rserpool.mi2), (695,1) Sequence "RSerPoolENRPPeerAddrTableEntry"
> and Row "rserpoolENRPPeerAddrTableEntry" should have related names W:
> f(rserpool.mi2), (753,1) Sequence "RSerPoolPoolElementEntry" and Row
> "rserpoolPEEntry" should have related names W: f(rserpool.mi2), (941,1)
> Sequence "RSerPoolPEASAPAddrTableEntry" and Row
> "rserpoolPEASAPAddrTableEntry" should have related names W:
> f(rserpool.mi2), (994,1) Sequence "RSerPoolPEUserAddrTableEntry" and Row
> "rserpoolPEUserAddrTableEntry" should have related names W:
> f(rserpool.mi2), (1060,1) Sequence "RSerPoolPoolUserEntry" and Row
> "rserpoolPUEntry" should have related names
>
> *** 0 errors and 12 warnings in parsing
>
> Probably cause by sticking to a better naming convention. Bit it would be
> consistent throughout. It seems likd what you have is not absolutely
> incorrect. Yet... it is certainly not following the way things are normally
> done.
>
> I think this is more what I would expect:
>
> rserpoolENRPTable OBJECT-TYPE
> SYNTAX SEQUENCE OF RserpoolENRPEntry
>
> Then the ENTRY spec should read like:
>
> rserpoolENRPEntry OBJECT-TYPE
> SYNTAX RserpoolENRPEntry
>
> And then:
>
> RserpoolENRPEntry ::= SEQUENCE {
> rserpoolENRPIndex Unsigned32,
>
>
> Same further down in the MIB module.
I replaced the prefix RSerPool by Rserpool. The warning should be fixed now.
Bert, please could you run the SMICng program again on the updated MIB module?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
iEYEARECAAYFAkmKh3IACgkQ32BbsHYPLWVI/wCffN6IE/gABUiaqRHRCaXrcm74
ZqAAn3ETcUhzC8nPrhoMJ8QeKZ2Iv/CT
=1J4Z
-----END PGP SIGNATURE-----
RSERPOOL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, experimental,
TimeTicks, Unsigned32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
InetAddressType, InetAddress, InetPortNumber
FROM INET-ADDRESS-MIB;
-- ## Module definition ###########################################
rserpoolMIB MODULE-IDENTITY
LAST-UPDATED
"200902050559Z" -- February 5, 2009
ORGANIZATION
"IEM-TdR, UNIVERSITY OF DUISBURG-ESSEN"
CONTACT-INFO
" THOMAS-DREIBHOLZ
Postal: University of Duisburg-Essen
Institute for Experimental Mathematics
Ellernstrasse 29
D-45326 Essen
Germany
Phone: +49-201-183-7637
Fax: +49-201-183-7673
Email: dreibh at iem.uni-due.de
JAIWANT-MULIK
Postal: Delaware State University
CIS Department
1200 N. DuPont Hw
Dover, DE
USA 19904
Phone: +1-302-857-7910
Fax: +1-302-857-6552
Email: jaiwant at mulik.com"
DESCRIPTION
"The MIB module for managing an RSerPool implementation"
REVISION
"200902050559Z" -- February 5, 2009
DESCRIPTION
"This version of the MIB module is published as RFC xxxx"
::= { experimental xxxxxx } -- To be IANA Assigned!!!
-- ## RSerPool type definitions ###################################
RSerPoolENRPServerIdentifierTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "x"
STATUS current
DESCRIPTION "The ID of an ENRP server"
SYNTAX Unsigned32 (1..4294967295)
RSerPoolOperationScopeTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1024t"
STATUS current
DESCRIPTION "The ID of an operation scope"
SYNTAX OCTET STRING (SIZE (0..65535))
RSerPoolPoolHandleTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1024t"
STATUS current
DESCRIPTION "The pool handle"
SYNTAX OCTET STRING (SIZE (0..65535))
RSerPoolDescriptionTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1024t"
STATUS current
DESCRIPTION "Description"
SYNTAX OCTET STRING (SIZE (0..4095))
RserpoolPoolElementIdentifierTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "x"
STATUS current
DESCRIPTION "The pool element ID"
SYNTAX Unsigned32 (1..4294967295)
RSerPoolPolicyIdentifierTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "x"
STATUS current
DESCRIPTION "The ID of the pool policy"
SYNTAX Unsigned32 (1..4294967295)
RSerPoolPolicyLoadTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION "The load status of a pool element"
SYNTAX Unsigned32 (0..4294967295)
RSerPoolPolicyWeightTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION "The weight of a pool element"
SYNTAX Unsigned32 (0..4294967295)
RSerPoolTransportUseTypeTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The transport use of a pool element"
SYNTAX INTEGER {
dataOnly(0),
dataPlusControl(1)
}
RSerPoolOpaqueAddressTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1024t"
STATUS current
DESCRIPTION "Opaque address"
SYNTAX OCTET STRING (SIZE (0..65535))
-- ## Top-level definitions #######################################
rserpoolENRPServers OBJECT IDENTIFIER ::= { rserpoolMIB 1 }
rserpoolPoolElements OBJECT IDENTIFIER ::= { rserpoolMIB 2 }
rserpoolPoolUsers OBJECT IDENTIFIER ::= { rserpoolMIB 3 }
-- ################################################################
-- #### ENRP Servers Section ####
-- ################################################################
-- ## Definition of the ENRP server table #########################
rserpoolENRPTable OBJECT-TYPE
SYNTAX SEQUENCE OF RserpoolENRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing of ENRP servers."
::= { rserpoolENRPServers 1 }
rserpoolENRPEntry OBJECT-TYPE
SYNTAX RserpoolENRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An ENRP server entry in the table listing of ENRP
servers."
INDEX { rserpoolENRPIndex }
::= { rserpoolENRPTable 1 }
RserpoolENRPEntry ::= SEQUENCE {
rserpoolENRPIndex Unsigned32,
rserpoolENRPOperationScope RSerPoolOperationScopeTC,
rserpoolENRPIdentifier RSerPoolENRPServerIdentifierTC,
rserpoolENRPDescription RSerPoolDescriptionTC,
rserpoolENRPUptime TimeTicks,
rserpoolENRPPort InetPortNumber,
rserpoolENRPASAPAnnouncePort InetPortNumber,
rserpoolENRPASAPAnnounceAddrType InetAddressType,
rserpoolENRPASAPAnnounceAddr InetAddress,
rserpoolENRPENRPAnnouncePort InetPortNumber,
rserpoolENRPENRPAnnounceAddrType InetAddressType,
rserpoolENRPENRPAnnounceAddr InetAddress }
rserpoolENRPIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer to uniquely identify an ENRP server."
::= { rserpoolENRPEntry 1 }
rserpoolENRPOperationScope OBJECT-TYPE
SYNTAX RSerPoolOperationScopeTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The definition of the operation scope of this ENRP server."
::= { rserpoolENRPEntry 2 }
rserpoolENRPIdentifier OBJECT-TYPE
SYNTAX RSerPoolENRPServerIdentifierTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ENRP server identifier of this ENRP server."
::= { rserpoolENRPEntry 3 }
rserpoolENRPDescription OBJECT-TYPE
SYNTAX RSerPoolDescriptionTC
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A textual description of this ENRP server, e.g. its location
and a contact address of its administrator."
::= { rserpoolENRPEntry 4 }
rserpoolENRPUptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ENRP service uptime of this ENRP server."
::= { rserpoolENRPEntry 5 }
rserpoolENRPPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SCTP port number of the ENRP protocol endpoint of
this ENRP server."
::= { rserpoolENRPEntry 6 }
rserpoolENRPASAPAnnouncePort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination UDP port number ASAP multicast announce
messages are sent to."
::= { rserpoolENRPEntry 7 }
rserpoolENRPASAPAnnounceAddrType OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network-layer protocol ASAP multicast announce messages
are sent over."
::= { rserpoolENRPEntry 8 }
rserpoolENRPASAPAnnounceAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP multicast address ASAP multicast
announce messages are sent to. The type of this address is
given in rserpoolENRPASAPAnnounceAddrType."
::= { rserpoolENRPEntry 9 }
rserpoolENRPENRPAnnouncePort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination UDP port number ENRP multicast announce
messages are sent to."
::= { rserpoolENRPEntry 10 }
rserpoolENRPENRPAnnounceAddrType OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network-layer protocol ENRP multicast announce messages
are sent over."
::= { rserpoolENRPEntry 11 }
rserpoolENRPENRPAnnounceAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination multicast IP address ENRP multicast
announce messages are sent to. The type of this address
is given in rserpoolENRPENRPAnnounceAddrType."
::= { rserpoolENRPEntry 12 }
-- ## Definition of the pool table ################################
rserpoolENRPPoolTable OBJECT-TYPE
SYNTAX SEQUENCE OF RserpoolENRPPoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing of pools."
::= { rserpoolENRPServers 3 }
rserpoolENRPPoolEntry OBJECT-TYPE
SYNTAX RserpoolENRPPoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The pool entry in the table listing of pools."
INDEX { rserpoolENRPIndex, rserpoolENRPPoolIndex }
::= { rserpoolENRPPoolTable 1 }
RserpoolENRPPoolEntry ::= SEQUENCE {
rserpoolENRPPoolIndex Unsigned32,
rserpoolENRPPoolHandle RSerPoolPoolHandleTC }
rserpoolENRPPoolIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer to uniquely identify a pool."
::= { rserpoolENRPPoolEntry 1 }
rserpoolENRPPoolHandle OBJECT-TYPE
SYNTAX RSerPoolPoolHandleTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The pool handle of this pool."
::= { rserpoolENRPPoolEntry 2 }
-- ## Definition of the pool element table ########################
rserpoolENRPPoolElementTable OBJECT-TYPE
SYNTAX SEQUENCE OF RserpoolENRPPoolElementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing of pool elements."
::= { rserpoolENRPServers 4 }
rserpoolENRPPoolElementEntry OBJECT-TYPE
SYNTAX RserpoolENRPPoolElementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A pool element in the table listing of pool elements."
INDEX {
rserpoolENRPIndex,
rserpoolENRPPoolIndex,
rserpoolENRPPoolElementIndex }
::= { rserpoolENRPPoolElementTable 1 }
RserpoolENRPPoolElementEntry ::= SEQUENCE {
rserpoolENRPPoolElementIndex Unsigned32,
rserpoolENRPPoolElementID RserpoolPoolElementIdentifierTC,
rserpoolENRPASAPTransportPort InetPortNumber,
rserpoolENRPUserTransportProto Unsigned32,
rserpoolENRPUserTransportPort InetPortNumber,
rserpoolENRPUserTransportUse RSerPoolTransportUseTypeTC,
rserpoolENRPPolicyID RSerPoolPolicyIdentifierTC,
rserpoolENRPPolicyDescription RSerPoolDescriptionTC,
rserpoolENRPPolicyWeight RSerPoolPolicyWeightTC,
rserpoolENRPPolicyLoad RSerPoolPolicyLoadTC,
rserpoolENRPPolicyLoadDeg RSerPoolPolicyLoadTC,
rserpoolENRPRegistrationLife TimeTicks,
rserpoolENRPHomeENRPServer RSerPoolENRPServerIdentifierTC }
rserpoolENRPPoolElementIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer to uniquely identify a pool element. Note,
that uniqueness of a pool element identifier in the pool
is not enforced, therefore this index is required here!"
::={ rserpoolENRPPoolElementEntry 1 }
rserpoolENRPPoolElementID OBJECT-TYPE
SYNTAX RserpoolPoolElementIdentifierTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The pool element identifier of this pool element."
::={ rserpoolENRPPoolElementEntry 2 }
rserpoolENRPASAPTransportPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SCTP port number of the ASAP endpoint of this pool
element."
::= { rserpoolENRPPoolElementEntry 3 }
rserpoolENRPUserTransportProto OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport protocol number of the service endpoint
of this pool element."
::= { rserpoolENRPPoolElementEntry 4 }
rserpoolENRPUserTransportPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport protocol's port number of the service
endpoint of this pool element."
::= { rserpoolENRPPoolElementEntry 5 }
rserpoolENRPUserTransportUse OBJECT-TYPE
SYNTAX RSerPoolTransportUseTypeTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport use of the service endpoint of this pool
element."
::= { rserpoolENRPPoolElementEntry 6 }
rserpoolENRPPolicyID OBJECT-TYPE
SYNTAX RSerPoolPolicyIdentifierTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The pool policy of this pool element."
::= { rserpoolENRPPoolElementEntry 7 }
rserpoolENRPPolicyDescription OBJECT-TYPE
SYNTAX RSerPoolDescriptionTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The textual description of the pool policy of this pool
element."
::= { rserpoolENRPPoolElementEntry 8 }
rserpoolENRPPolicyWeight OBJECT-TYPE
SYNTAX RSerPoolPolicyWeightTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The pool policy's weight parameter for this pool element."
::= { rserpoolENRPPoolElementEntry 9 }
rserpoolENRPPolicyLoad OBJECT-TYPE
SYNTAX RSerPoolPolicyLoadTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The pool policy's load status for this pool element."
::= { rserpoolENRPPoolElementEntry 10 }
rserpoolENRPPolicyLoadDeg OBJECT-TYPE
SYNTAX RSerPoolPolicyLoadTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The pool policy's load degradation parameter for this pool
element."
::= { rserpoolENRPPoolElementEntry 11 }
rserpoolENRPRegistrationLife OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The registration life of this pool element."
::= { rserpoolENRPPoolElementEntry 12 }
rserpoolENRPHomeENRPServer OBJECT-TYPE
SYNTAX RSerPoolENRPServerIdentifierTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID of the home ENRP server of this pool element."
::= { rserpoolENRPPoolElementEntry 13 }
-- ## Definition of the ASAP transport address list table #########
rserpoolENRPASAPAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RserpoolENRPASAPAddrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing of all IP addresses of the ASAP transport
endpoint."
::= { rserpoolENRPServers 5 }
rserpoolENRPASAPAddrTableEntry OBJECT-TYPE
SYNTAX RserpoolENRPASAPAddrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IP address of the ASAP transport endpoint."
INDEX {
rserpoolENRPIndex,
rserpoolENRPPoolIndex,
rserpoolENRPPoolElementIndex,
rserpoolENRPASAPAddrTableIndex }
::= { rserpoolENRPASAPAddrTable 1 }
RserpoolENRPASAPAddrTableEntry ::= SEQUENCE {
rserpoolENRPASAPAddrTableIndex Unsigned32,
rserpoolENRPASAPL3Type InetAddressType,
rserpoolENRPASAPL3Addr InetAddress }
rserpoolENRPASAPAddrTableIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique identifier for the IP address of an ASAP transport
endpoint."
::= { rserpoolENRPASAPAddrTableEntry 1 }
rserpoolENRPASAPL3Type OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network-layer protocol (IPv4 or IPv6) of an IP address of
an ASAP transport endpoint."
::= { rserpoolENRPASAPAddrTableEntry 2 }
rserpoolENRPASAPL3Addr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of an ASAP transport endpoint. The type of
this address is given in rserpoolENRPASAPL3Type."
::= { rserpoolENRPASAPAddrTableEntry 3 }
-- ## Definition of the user transport address list table #########
rserpoolENRPUserAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RserpoolENRPUserAddrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing of all IP addresses of the user
transport endpoint."
::= { rserpoolENRPServers 6 }
rserpoolENRPUserAddrTableEntry OBJECT-TYPE
SYNTAX RserpoolENRPUserAddrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IP address of the user transport endpoint."
INDEX {
rserpoolENRPIndex,
rserpoolENRPPoolIndex,
rserpoolENRPPoolElementIndex,
rserpoolENRPUserAddrTableIndex }
::= { rserpoolENRPUserAddrTable 1 }
RserpoolENRPUserAddrTableEntry ::= SEQUENCE {
rserpoolENRPUserAddrTableIndex Unsigned32,
rserpoolENRPUserL3Type InetAddressType,
rserpoolENRPUserL3Addr InetAddress,
rserpoolENRPUserL3Opaque RSerPoolOpaqueAddressTC }
rserpoolENRPUserAddrTableIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique identifier for the IP address of an user transport
endpoint."
::= { rserpoolENRPUserAddrTableEntry 1 }
rserpoolENRPUserL3Type OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network-layer protocol (IPv4 or IPv6) of an IP address
of an user transport endpoint."
::= { rserpoolENRPUserAddrTableEntry 2 }
rserpoolENRPUserL3Addr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of an user transport endpoint. The type of
this address is given in rserpoolENRPUserL3Type."
::= { rserpoolENRPUserAddrTableEntry 3 }
rserpoolENRPUserL3Opaque OBJECT-TYPE
SYNTAX RSerPoolOpaqueAddressTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The opaque address of an user transport endpoint."
::= { rserpoolENRPUserAddrTableEntry 4 }
-- ## Definition of ENRP address list table #######################
rserpoolENRPENRPAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RserpoolENRPENRPAddrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing of all IP addresses of the ENRP
transport endpoint."
::= { rserpoolENRPServers 7 }
rserpoolENRPENRPAddrTableEntry OBJECT-TYPE
SYNTAX RserpoolENRPENRPAddrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IP address of the ENRP transport endpoint."
INDEX {
rserpoolENRPIndex,
rserpoolENRPENRPAddrTableIndex }
::= { rserpoolENRPENRPAddrTable 1 }
RserpoolENRPENRPAddrTableEntry ::= SEQUENCE {
rserpoolENRPENRPAddrTableIndex Unsigned32,
rserpoolENRPENRPL3Type InetAddressType,
rserpoolENRPENRPL3Addr InetAddress }
rserpoolENRPENRPAddrTableIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique identifier for the IP address of an ENRP transport
endpoint."
::= { rserpoolENRPENRPAddrTableEntry 1 }
rserpoolENRPENRPL3Type OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network-layer protocol (IPv4 or IPv6) of an IP address of
an ENRP transport endpoint."
::= { rserpoolENRPENRPAddrTableEntry 2 }
rserpoolENRPENRPL3Addr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of an ENRP transport endpoint. The type of
this address is given in rserpoolENRPENRPL3Type."
::= { rserpoolENRPENRPAddrTableEntry 3 }
-- ## Definition of peer table ####################################
rserpoolENRPPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RserpoolENRPPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing of a peer table."
::= { rserpoolENRPServers 8 }
rserpoolENRPPeerEntry OBJECT-TYPE
SYNTAX RserpoolENRPPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A peer entry in the table listing of a peer table."
INDEX { rserpoolENRPPeerIndex }
::= { rserpoolENRPPeerTable 1 }
RserpoolENRPPeerEntry ::= SEQUENCE {
rserpoolENRPPeerIndex Unsigned32,
rserpoolENRPPeerIdentifier Unsigned32,
rserpoolENRPPeerPort InetPortNumber,
rserpoolENRPPeerLastHeard TimeTicks }
rserpoolENRPPeerIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique identifier for a peer entry in the table
listing of a peer table."
::= { rserpoolENRPPeerEntry 1 }
rserpoolENRPPeerIdentifier OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ENRP identifier of this peer."
::= { rserpoolENRPPeerEntry 2 }
rserpoolENRPPeerPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SCTP port number of the ENRP transport endpoint of
this peer."
::= { rserpoolENRPPeerEntry 3 }
rserpoolENRPPeerLastHeard OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the reception of the last ENRP Presence
message of this peer."
::= { rserpoolENRPPeerEntry 4 }
-- ## Definition of peer address list table #######################
rserpoolENRPPeerAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RserpoolENRPPeerAddrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing of the peer endpoint addresses."
::= { rserpoolENRPServers 9 }
rserpoolENRPPeerAddrTableEntry OBJECT-TYPE
SYNTAX RserpoolENRPPeerAddrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing of all IP addresses of the ENRP
transport endpoint of a peer referenced by peerIndex."
INDEX {
rserpoolENRPPeerIndex,
rserpoolENRPPeerAddrTableIndex }
::= { rserpoolENRPPeerAddrTable 1 }
RserpoolENRPPeerAddrTableEntry ::= SEQUENCE {
rserpoolENRPPeerAddrTableIndex Unsigned32,
rserpoolENRPPeerL3Type InetAddressType,
rserpoolENRPPeerL3Addr InetAddress }
rserpoolENRPPeerAddrTableIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique identifier for the IP address of a peer ENRP
transport endpoint."
::= { rserpoolENRPPeerAddrTableEntry 1 }
rserpoolENRPPeerL3Type OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network-layer protocol (IPv4 or IPv6) of an IP address
of a peer ENRP transport endpoint."
::= { rserpoolENRPPeerAddrTableEntry 2 }
rserpoolENRPPeerL3Addr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of a peer ENRP transport endpoint. The type
of this address is given in rserpoolENRPPeerL3Type."
::= { rserpoolENRPPeerAddrTableEntry 3 }
-- ################################################################
-- #### Pool Elements Section ####
-- ################################################################
-- ## Definition of the pool element table ########################
rserpoolPETable OBJECT-TYPE
SYNTAX SEQUENCE OF RserpoolPoolElementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing of pool elements."
::= { rserpoolPoolElements 1 }
rserpoolPEEntry OBJECT-TYPE
SYNTAX RserpoolPoolElementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A pool element in the table listing of pool elements."
INDEX { rserpoolPEIndex }
::= { rserpoolPETable 1 }
RserpoolPoolElementEntry ::= SEQUENCE {
rserpoolPEIndex Unsigned32,
rserpoolPEOperationScope RSerPoolOperationScopeTC,
rserpoolPEPoolHandle RSerPoolPoolHandleTC,
rserpoolPEIdentifier RserpoolPoolElementIdentifierTC,
rserpoolPEDescription RSerPoolDescriptionTC,
rserpoolPEUptime TimeTicks,
rserpoolPEASAPTransportPort InetPortNumber,
rserpoolPEUserTransportProto Unsigned32,
rserpoolPEUserTransportPort InetPortNumber,
rserpoolPEUserTransportUse RSerPoolTransportUseTypeTC,
rserpoolPEPolicyID RSerPoolPolicyIdentifierTC,
rserpoolPEPolicyDescription RSerPoolDescriptionTC,
rserpoolPEPolicyWeight RSerPoolPolicyWeightTC,
rserpoolPEPolicyLoad RSerPoolPolicyLoadTC,
rserpoolPEPolicyLoadDeg RSerPoolPolicyLoadTC,
rserpoolPERegistrationLife TimeTicks,
rserpoolPEHomeENRPServer RSerPoolENRPServerIdentifierTC }
rserpoolPEIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer to uniquely identify a pool element. Note,
that uniqueness of a pool element identifier in the pool
is not enforced, therefore this index is required here!"
::={ rserpoolPEEntry 1 }
rserpoolPEOperationScope OBJECT-TYPE
SYNTAX RSerPoolOperationScopeTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operation scope of this pool element."
::= { rserpoolPEEntry 2 }
rserpoolPEPoolHandle OBJECT-TYPE
SYNTAX RSerPoolPoolHandleTC
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The pool handle of this pool element. Changing this object
will update the pool element's pool handle and result in a
re-registration."
::={ rserpoolPEEntry 3 }
rserpoolPEIdentifier OBJECT-TYPE
SYNTAX RserpoolPoolElementIdentifierTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The pool element identifier of this pool element."
::={ rserpoolPEEntry 4 }
rserpoolPEDescription OBJECT-TYPE
SYNTAX RSerPoolDescriptionTC
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A textual description of this pool element, e.g. its location
and a contact address of its administrator."
::= { rserpoolPEEntry 5 }
rserpoolPEUptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ENRP service uptime of this pool element."
::= { rserpoolPEEntry 6 }
rserpoolPEASAPTransportPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SCTP port number of the ASAP endpoint of this pool element."
::= { rserpoolPEEntry 7 }
rserpoolPEUserTransportProto OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport protocol number of the service endpoint
of this pool element."
::= { rserpoolPEEntry 8 }
rserpoolPEUserTransportPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport protocol's port number of the service
endpoint of this pool element."
::= { rserpoolPEEntry 9 }
rserpoolPEUserTransportUse OBJECT-TYPE
SYNTAX RSerPoolTransportUseTypeTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport use of the service endpoint of this pool element."
::= { rserpoolPEEntry 10 }
rserpoolPEPolicyID OBJECT-TYPE
SYNTAX RSerPoolPolicyIdentifierTC
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The pool policy of this pool element. Changing this object
will update the pool element's policy and result in a
re-registration."
::= { rserpoolPEEntry 11 }
rserpoolPEPolicyDescription OBJECT-TYPE
SYNTAX RSerPoolDescriptionTC
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The textual description of the pool policy of this pool element."
::= { rserpoolPEEntry 12 }
rserpoolPEPolicyWeight OBJECT-TYPE
SYNTAX RSerPoolPolicyWeightTC
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The pool policy's weight parameter for this pool element.
Changing this object will update the pool element's policy
weight setting and result in
a re-registration."
::= { rserpoolPEEntry 13 }
rserpoolPEPolicyLoad OBJECT-TYPE
SYNTAX RSerPoolPolicyLoadTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The pool policy's load status for this pool element."
::= { rserpoolPEEntry 14 }
rserpoolPEPolicyLoadDeg OBJECT-TYPE
SYNTAX RSerPoolPolicyLoadTC
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The pool policy's load degradation parameter for this pool
element. Changing this object will update the pool element's
load degradation setting and result in a re-registration."
::= { rserpoolPEEntry 15 }
rserpoolPERegistrationLife OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The registration life of this pool element. Changing this
object will update the pool element's lifetime setting and
result in a re-registration."
::= { rserpoolPEEntry 16 }
rserpoolPEHomeENRPServer OBJECT-TYPE
SYNTAX RSerPoolENRPServerIdentifierTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID of the home ENRP server of this pool element."
::= { rserpoolPEEntry 17 }
-- ## Definition of the ASAP transport address list table #########
rserpoolPEASAPAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RserpoolPEASAPAddrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing of all IP addresses of the ASAP transport
endpoint."
::= { rserpoolPoolElements 2 }
rserpoolPEASAPAddrTableEntry OBJECT-TYPE
SYNTAX RserpoolPEASAPAddrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IP address of the ASAP transport endpoint."
INDEX {
rserpoolPEIndex,
rserpoolPEASAPAddrTableIndex }
::= { rserpoolPEASAPAddrTable 1 }
RserpoolPEASAPAddrTableEntry ::= SEQUENCE {
rserpoolPEASAPAddrTableIndex Unsigned32,
rserpoolPEASAPL3Type InetAddressType,
rserpoolPEASAPL3Addr InetAddress }
rserpoolPEASAPAddrTableIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique identifier for the IP address of an ASAP transport
endpoint."
::= { rserpoolPEASAPAddrTableEntry 1 }
rserpoolPEASAPL3Type OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network-layer protocol (IPv4 or IPv6) of an IP address of
an ASAP transport endpoint."
::= { rserpoolPEASAPAddrTableEntry 2 }
rserpoolPEASAPL3Addr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of an ASAP transport endpoint. The type of
this address is given in rserpoolPEASAPL3Type."
::= { rserpoolPEASAPAddrTableEntry 3 }
-- ## Definition of the user transport address list table #########
rserpoolPEUserAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RserpoolPEUserAddrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing of all IP addresses of the user
transport endpoint."
::= { rserpoolPoolElements 6 }
rserpoolPEUserAddrTableEntry OBJECT-TYPE
SYNTAX RserpoolPEUserAddrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IP address of the user transport endpoint."
INDEX {
rserpoolPEIndex,
rserpoolPEUserAddrTableIndex }
::= { rserpoolPEUserAddrTable 1 }
RserpoolPEUserAddrTableEntry ::= SEQUENCE {
rserpoolPEUserAddrTableIndex Unsigned32,
rserpoolPEUserL3Type InetAddressType,
rserpoolPEUserL3Addr InetAddress,
rserpoolPEUserL3Opaque RSerPoolOpaqueAddressTC }
rserpoolPEUserAddrTableIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique identifier for the IP address of an user transport
endpoint."
::= { rserpoolPEUserAddrTableEntry 1 }
rserpoolPEUserL3Type OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network-layer protocol of an IP address of
an user transport endpoint. Set to unknown for opaque address."
::= { rserpoolPEUserAddrTableEntry 2 }
rserpoolPEUserL3Addr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of an user transport endpoint. The type of
this address is given in rserpoolPEUserL3Addr."
::= { rserpoolPEUserAddrTableEntry 3 }
rserpoolPEUserL3Opaque OBJECT-TYPE
SYNTAX RSerPoolOpaqueAddressTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The opaque address of an user transport endpoint."
::= { rserpoolPEUserAddrTableEntry 4 }
-- ################################################################
-- #### Pool Users Section ####
-- ################################################################
-- ## Definition of the pool user table ###########################
rserpoolPUTable OBJECT-TYPE
SYNTAX SEQUENCE OF RserpoolPoolUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing of pool users."
::= { rserpoolPoolUsers 1 }
rserpoolPUEntry OBJECT-TYPE
SYNTAX RserpoolPoolUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A pool user in the table listing of pool users."
INDEX { rserpoolPUIndex }
::= { rserpoolPUTable 1 }
RserpoolPoolUserEntry ::= SEQUENCE {
rserpoolPUIndex Unsigned32,
rserpoolPUOperationScope RSerPoolOperationScopeTC,
rserpoolPUPoolHandle RSerPoolPoolHandleTC,
rserpoolPUDescription RSerPoolDescriptionTC,
rserpoolPUUptime TimeTicks }
rserpoolPUIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer to uniquely identify a pool user."
::= { rserpoolPUEntry 1 }
rserpoolPUOperationScope OBJECT-TYPE
SYNTAX RSerPoolOperationScopeTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operation scope of this pool user."
::= { rserpoolPUEntry 2 }
rserpoolPUPoolHandle OBJECT-TYPE
SYNTAX RSerPoolPoolHandleTC
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The pool handle of this pool user. Changing this object
will update the pool user's pool handle for all future
sessions."
::={ rserpoolPUEntry 3 }
rserpoolPUDescription OBJECT-TYPE
SYNTAX RSerPoolDescriptionTC
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A textual description of this pool user, e.g. its location
and a contact address of its administrator."
::= { rserpoolPUEntry 4 }
rserpoolPUUptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ENRP service uptime of this pool user."
::= { rserpoolPUEntry 5 }
-- ## MIB conformance and compliance ##############################
rserpoolMIBConformance OBJECT IDENTIFIER ::= { rserpoolMIB 4 }
rserpoolMIBCompliances OBJECT IDENTIFIER ::= {
rserpoolMIBConformance 1
}
rserpoolMIBGroups OBJECT IDENTIFIER ::= {
rserpoolMIBConformance 2
}
rserpoolMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement RSerPool."
MODULE
MANDATORY-GROUPS {
rserpoolENRPGroup,
rserpoolPEGroup,
rserpoolPUGroup }
::= { rserpoolMIBCompliances 1 }
rserpoolENRPGroup OBJECT-GROUP
OBJECTS {
rserpoolENRPOperationScope,
rserpoolENRPIdentifier,
rserpoolENRPDescription,
rserpoolENRPUptime,
rserpoolENRPPort,
rserpoolENRPASAPAnnouncePort,
rserpoolENRPASAPAnnounceAddr,
rserpoolENRPASAPAnnounceAddrType,
rserpoolENRPENRPAnnounceAddrType,
rserpoolENRPENRPAnnouncePort,
rserpoolENRPENRPAnnounceAddr,
rserpoolENRPPoolHandle,
rserpoolENRPPoolElementID,
rserpoolENRPASAPTransportPort,
rserpoolENRPUserTransportProto,
rserpoolENRPUserTransportUse,
rserpoolENRPUserTransportPort,
rserpoolENRPPolicyID,
rserpoolENRPPolicyDescription,
rserpoolENRPPolicyWeight,
rserpoolENRPPolicyLoad,
rserpoolENRPPolicyLoadDeg,
rserpoolENRPRegistrationLife,
rserpoolENRPHomeENRPServer,
rserpoolENRPASAPL3Type,
rserpoolENRPASAPL3Addr,
rserpoolENRPUserL3Type,
rserpoolENRPUserL3Addr,
rserpoolENRPUserL3Opaque,
rserpoolENRPENRPL3Type,
rserpoolENRPENRPL3Addr,
rserpoolENRPPeerIdentifier,
rserpoolENRPPeerPort,
rserpoolENRPPeerLastHeard,
rserpoolENRPPeerL3Type,
rserpoolENRPPeerL3Addr }
STATUS current
DESCRIPTION
"The group contains all ENRP server instances
running on the system"
::= { rserpoolMIBGroups 1 }
rserpoolPEGroup OBJECT-GROUP
OBJECTS {
rserpoolPEOperationScope,
rserpoolPEPoolHandle,
rserpoolPEIdentifier,
rserpoolPEDescription,
rserpoolPEUptime,
rserpoolPEASAPTransportPort,
rserpoolPEUserTransportProto,
rserpoolPEUserTransportPort,
rserpoolPEUserTransportUse,
rserpoolPEPolicyID,
rserpoolPEPolicyDescription,
rserpoolPEPolicyWeight,
rserpoolPEPolicyLoad,
rserpoolPEPolicyLoadDeg,
rserpoolPERegistrationLife,
rserpoolPEHomeENRPServer,
rserpoolPEASAPL3Type,
rserpoolPEASAPL3Addr,
rserpoolPEUserL3Type,
rserpoolPEUserL3Addr,
rserpoolPEUserL3Opaque }
STATUS current
DESCRIPTION
"The group contains all pool element instances
running on the system"
::= { rserpoolMIBGroups 2 }
rserpoolPUGroup OBJECT-GROUP
OBJECTS { rserpoolPUOperationScope,
rserpoolPUPoolHandle,
rserpoolPUDescription,
rserpoolPUUptime }
STATUS current
DESCRIPTION
"The group contains all pool user instances
running on the system"
::= { rserpoolMIBGroups 3 }
END