RE: [Sip] tool for automating soft phone key pad clicking

[Rathod Subhashchandra <rathod at tataelxsi.co.in>]

Hi Javier,

Thanks lot for this information.
I have installed the Macro Express 3.
Need to play with this tool to know how key strokes can be automated.

My requirement is
1.	I have developed the test automation tool for SIP protocol conformance.
2.	Testing at present with SJPhone. SJPhone needs manual interaction for
accepting/rejecting the call and also to place the MT(Mobile Terminating) to
the Testing tool.
4.	We have close to 300 test cases. Manually accepting/rejecting and placing
call for these many test cases is becoming very difficult job.
Hence, I wanted to automate the SJPhone for
accepting/rejecting/call-placing. I can't write the stub as I don't have
interface document.

At present, I am not sure, whether all above things shall be taken care by
MacroExpress3.

Thanks !
Rathod.


-----Original Message-----
From: Jesus Javier Arauz (MI/EEM)
[mailto:jesus.javier.arauz at ericsson.com]
Sent: Friday, January 05, 2007 1:41 PM
To: Rathod Subhashchandra; Sebastien Tricaud
Cc: sip at ietf.org
Subject: RE: [Sip] tool for automating soft phone key pad clicking


Hi,

In a recent prototype I had to emulate processing of a 302 response by a
SIP client by launching a script that actually dials the phone number
received in the Contact header of the 302 on the client's UI. The reason
was obviously that the client did not properly implement the re-dialling
on reception of the 302.

The tool I used is MacroExpress 3 and it worked pretty well.

Hope it is helpful,
/Javier

Rathod Subhashchandra wrote:
> Hi Sebastien,
>
> I went through this.
> Looks very complicated. I am looking a tool like WinRunner. Can you
> help me in this?
>
> Thanks !
> Rathod.
>
>
> -----Original Message-----
> From: Sebastien Tricaud [mailto:sebastien.tricaud at wengo.fr]
> Sent: Thursday, January 04, 2007 3:42 PM
> To: Rathod Subhashchandra
> Cc: sip at ietf.org
> Subject: Re: [Sip] tool for automating soft phone key pad clicking
>
>
> Hello,
>
> For buttons clicks, I guess you can get sounds produced by softphones
> and script a player to it :-)
>
> Or, you can use miniua for sip calls scripting. Its documentation is
> available there ->
> http://dev.openwengo.com/trac/openwengo/trac.cgi/wiki/MiniUa
>
>
> In the hope that help you,
>
> Sebastien.
>
>
>
>
>
> Rathod Subhashchandra wrote:
>> Hi All,
>>
>> I am looking for a tool which shall help in automating third party
>> software(SIP Stack phone) like automating of buttons click on the
>> soft phones. It would be a great help if someone provides relevant
>> details.
>>
>> Thanks !
>> Rathod.
>>
>>
>>
>>
>> _______________________________________________
>> Sip mailing list  https://www1.ietf.org/mailman/listinfo/sip
>> This list is for NEW development of the core SIP Protocol Use
>> sip-implementors at cs.columbia.edu for questions on current sip Use
>> sipping at ietf.org for new developments on the application of sip


_______________________________________________
Sip mailing list  https://www1.ietf.org/mailman/listinfo/sip
This list is for NEW development of the core SIP Protocol
Use sip-implementors at cs.columbia.edu for questions on current sip
Use sipping at ietf.org for new developments on the application of sip