RE: [XCON] Proposed small fixes to BFCP

["Oscar Novo \(JO/LMF\)" <oscar.novo at ericsson.com>]

Hello,

I think the solution is good but I have a question about the ChairAction
operation:

NEW:

    ChairAction  =   (COMMON-HEADER)
                   1*(FLOOR-REQUEST-STATUS)
                     (FLOOR-REQUEST-ID)
                     [STATUS-INFO]
                    *[EXTENSION-ATTRIBUTE]
 

Why this operation does not use the OVERALL-REQUEST-STATUS attribute as
well to refer to positions in a global queue?

NEW PROPOSAL:

    ChairAction  =   (COMMON-HEADER)
                     [OVERALL-REQUEST-STATUS]  <--
                   1*[FLOOR-REQUEST-STATUS]
                     (FLOOR-REQUEST-ID)
                     [STATUS-INFO]
                    *[EXTENSION-ATTRIBUTE]

Cheers,

Oscar


-----Original Message-----
From: Adam Roach [mailto:adam at nostrum.com] 
Sent: 29. huhtikuuta 2006 2:27
To: Gonzalo Camarillo (JO/LMF)
Cc: Joerg Ott; Keith Drage; alan at sipstation.com; XCON
Subject: Re: [XCON] Proposed small fixes to BFCP

I was hoping to hear more from working group members before making the
decision -- but it appears that no one has any comments one way or the
other on the issue. I'll discuss with our AD and try to determine the
best way to move forward.

/a

Gonzalo Camarillo wrote:
> Adam, Alan,
>
> I would like to, at least, get the "go ahead" from the chairs...
>
> Thanks,
>
> Gonzalo
>
> Gonzalo Camarillo wrote:
>> Folks,
>>
>> while implementing our BFCP stack (the 'running code' part of the 
>> protocol), we have discovered a couple of relatively minor bugs in 
>> the BFCP spec that need to be fixed. They are probably too big to be 
>> fixed thru RFC editor notes. My suggestion would be to remove the 
>> draft from the queue, perform the changes I propose below, and send 
>> it back to the queue. Opinions?
>>
>>
>> Section 5.3.9 defines the ChairAction message. That message can 
>> contain several floors (which belong to the same floor request
>> operation) but can only provide a single queue position (within the 
>> REQUEST-STATUS attribute) for all of them. We need to be able to 
>> provide different queue positions for different floors (e.g., second 
>> for floor 1 and third for floor 2). In order to do this, we need to 
>> define a new grouped attribute called FLOOR-REQUEST-STATUS whose 
>> definition would be the following:
>>
>> Attribute header:
>>
>>      0                   1                   2                   3
>>       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
>>
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
>>      |x x x x x x x|M|    Length     |           Floor ID
|
>>      
>> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
>>
>> Attribute ABNF:
>>
>>  FLOOR-REQUEST-STATUS =   (FLOOR-REQUEST-STATUS-HEADER)
>>                           (REQUEST-STATUS)
>>                           [STATUS-INFO]
>>                          *[EXTENSION-ATTRIBUTE]
>>
>> Now, the already existing FLOOR-REQUEST-INFORMATION grouped attribute

>> would carry '1*(FLOOR-REQUEST-STATUS)' instead of '1*(FLOOR-ID)'
>>
>> The same for the already existing ChairAction message.
>>
>>
>> Additionally, we would define a new grouped attribute called 
>> OVERALL-REQUEST-STATUS, whose definition would be almost identical to

>> the FLOOR-REQUEST-STATUS attribute. The only difference is that this 
>> one would carry a Floor Request ID instead of a Floor ID. This 
>> attribute would be used within the FLOOR-REQUEST-INFORMATION 
>> attribute, whose ABNF would become:
>>
>> OLD:
>>
>>    FLOOR-REQUEST-INFORMATION =   (FLOOR-REQUEST-INFORMATION-HEADER)
>>                                  (REQUEST-STATUS)              <--
>>                                1*(FLOOR-ID)                    <--
>>                                  [BENEFICIARY-INFORMATION]
>>                                  [REQUESTED-BY-INFORMATION]
>>                                  [PRIORITY]
>>                                  [PARTICIPANT-PROVIDED-INFO]
>>                                  [STATUS-INFO]                 <--
>>                                 *[EXTENSION-ATTRIBUTE]
>>
>> NEW:
>>
>>    FLOOR-REQUEST-INFORMATION =   (FLOOR-REQUEST-INFORMATION-HEADER)
>>                                  (OVERALL-REQUEST-STATUS)
>>                                1*(FLOOR-REQUEST-STATUS)
>>                                  [BENEFICIARY-INFORMATION]
>>                                  [REQUESTED-BY-INFORMATION]
>>                                  [PRIORITY]
>>                                  [PARTICIPANT-PROVIDED-INFO]
>>                                 *[EXTENSION-ATTRIBUTE]
>>
>>
>>
>> Then, we would need to add a brief discussion on queues, indicating 
>> that the queue positions in the OVERALL-REQUEST-STATUS attribute 
>> refer to positions in a global queue for floor requests and that 
>> queue positions in the FLOOR-REQUEST-STATUS attribute refer to 
>> positions in a queue for floor requests for a particular floor. Of 
>> course, implementations are free to implement (or provide information
>> about) one, both, or none of these queue types.
>>
>> The ChairAction message would become:
>>
>> OLD:
>>
>>    ChairAction  =   (COMMON-HEADER)
>>                   1*(FLOOR-ID)             <--
>>                     (FLOOR-REQUEST-ID)
>>                     (REQUEST-STATUS)       <--
>>                     [STATUS-INFO]
>>                    *[EXTENSION-ATTRIBUTE]
>>
>> NEW:
>>
>>    ChairAction  =   (COMMON-HEADER)
>>                   1*(FLOOR-REQUEST-STATUS)
>>                     (FLOOR-REQUEST-ID)
>>                     [STATUS-INFO]
>>                    *[EXTENSION-ATTRIBUTE]
>>
>>
>> A different issue (more easily fixable than the issue above) is that 
>> the FloorRequest and the FloorQuery messages should carry
>> 1*(FLOOR-ID) instead of *(FLOOR-ID).
>>
>> Cheers,
>>
>> Gonzalo
>>


_______________________________________________
XCON mailing list
XCON at ietf.org
https://www1.ietf.org/mailman/listinfo/xcon

_______________________________________________
XCON mailing list
XCON at ietf.org
https://www1.ietf.org/mailman/listinfo/xcon