"Ethernet Traffic Parameters", Dimitri Papadimitriou, 17-Apr-09. ( bytes)

This document describes the Metro Ethernet Forum (MEF) - specific Ethernet Traffic Parameters as described in MEF10.1 when using Generalized Multi-Protocol Label Switching (GMPLS) Resource ReSerVation Protocol - Traffic Engineering (RSVP-TE) signaling.

"OSPFv2 Routing Protocols Extensions for ASON Routing", Dimitri Papadimitriou, 7-Apr-09. ( bytes)

The ITU-T has defined an architecture and requirements for operating an Automatically Switched Optical Network (ASON). The Generalized Multiprotocol Label Switching (GMPLS) protocol suite is designed to provide a control plane for a range of network technologies including optical networks such as time division multiplexing (TDM) networks including SONET/SDH and Optical Transport Networks (OTNs), and lambda switching optical networks. The requirements for GMPLS routing to satisfy the requirements of ASON routing, and an evaluation of existing GMPLS routing protocols are provided in other documents. This document defines to the OSPFv2 Link State Routing Protocol to meet the routing requirements for routing in an ASON. D.Papadimitriou et al. - Expires October 2009 [page 1] draft-ietf-ccamp-gmpls-ason-routing-ospf-08.txt April 2009 Note that this work is scoped to the requirements and evaluation expressed in RFC 4258 and RFC 4652 and the ITU-T Recommendations current when those documents were written. Future extensions of revisions of this work may be necessary if the ITU-T Recommendations are revised or if new requirements are introduced into a revision of RFC 4258.

"Graceful Shutdown in MPLS and Generalized MPLS Traffic Engineering Networks", Zafar Ali, JP Vasseur, Anca Zamfir, 9-Mar-09. ( bytes)

MPLS-TE Graceful Shutdown is a method for explicitly notifying the nodes in a Traffic Engineering (TE) enabled network that the TE capability on a link or on an entire Label Switching Router (LSR) is going to be disabled. MPLS-TE graceful shutdown mechanisms are tailored toward addressing planned outage in the network. This document provides requirements and protocol mechanisms to reduce/eliminate traffic disruption in the event of a planned shutdown of a network resource. These operations are equally applicable to both MPLS and its Generalized MPLS (GMPLS) extensions.

"draft-ietf-ccamp-gmpls-vcat-lcas-08.txt", Greg Bernstein, Richard Rabbat, Huub Helvoort, 28-Jul-09. ( bytes)

This document describes requirements for, and use of, the Generalized Multi-Protocol Label Switching (GMPLS) control plane in conjunction with the Virtual Concatenation (VCAT) layer 1 inverse multiplexing mechanism and its companion Link Capacity Adjustment Scheme (LCAS) which can be used for hitless dynamic resizing of the inverse multiplex group. These techniques apply to Optical Transport Network (OTN), Synchronous Optical Network (SONET), Synchronous Digital Hierarchy (SDH), and Plesiochronous Digital Hierarchy (PDH) signals.

"Generalized Multi-Protocol Label Switching (GMPLS) Protocol Extensions for Multi-Layer and Multi-Region Networks (MLN/MRN)", Dimitri Papadimitriou, Martin Vigoureux, Kohei Shiomoto, Deborah Brungard, Jean-Louis Le Roux, 13-Jul-09. ( bytes)

There are specific requirements for the support of networks comprising Label Switching Routers (LSR) participating in different data plane switching layers controlled by a single Generalized Multi Protocol Label Switching (GMPLS) control plane instance, referred to as GMPLS Multi-Layer Networks/Multi-Region Networks (MLN/MRN). This document defines extensions to GMPLS routing and signaling protocols so as to support the operation of GMPLS Multi-Layer/Multi- Region Networks. It covers the elements of a single GMPLS control plane instance controlling multiple LSP regions or layers within a single TE domain.

"Generalized Multi-Protocol Label Switching (GMPLS) Ethernet Label Switching Architecture and Framework", Don Fedyk, Lou Berger, Loa Andersson, 13-Feb-09. ( bytes)

There has been significant recent work in increasing the capabilities of Ethernet switches and Ethernet forwarding models. As a consequence, the role of Ethernet is rapidly expanding into "transport networks" that previously were the domain of other technologies such as Synchronous Optical Network (SONET)/Synchronous Digital Hierarchy (SDH), Time-Division Multiplex (TDM) and Asynchronous Transfer Mode (ATM). This document defines an architecture and framework for a Generalized GMPLS based control plane for Ethernet in this "transport network" capacity. GMPLS has already been specified for similar technologies. Some additional extensions to the GMPLS control plane are needed and this document provides a framework for these extensions.

"Label Switched Path (LSP) Dynamic Provisioning Performance Metrics in Generalized MPLS Networks", Weiqiang Sun, Guoying Zhang, Jianhua Gao, Guowu Xie, Rajiv Papneja, Bin Gu, Xueqing Wei, Tomohiro Otani, Ruiquan Jing, 9-Jul-09. ( bytes)

Generalized Multi-Protocol Label Switching (GMPLS) is one of the most promising candidate technologies for future data transmission network. GMPLS has been developed to control and operate different kinds of network elements, such as conventional routers, switches, Dense Wavelength Division Multiplexing (DWDM) systems, Add- Drop Multiplexers (ADMs), photonic cross-connects (PXCs), optical cross- connects (OXCs), etc. Dynamic provisioning ability of these physically diverse devices differs from each other drastically. At the same time, the need for dynamically provisioned connections is increasing because optical networks are being deployed in metro areas. As different applications have varied requirements in the provisioning performance of optical networks, it is imperative to define standardized metrics and procedures such that the performance of networks and application needs can be mapped to each other. This document provides a series of performance metrics to evaluate the dynamic LSP provisioning performance in GMPLS networks, specifically the dynamic LSP setup/release performance. These metrics can depict the features of GMPLS networks in LSP dynamic provisioning. They can also be used in operational networks for carriers to monitor the control plane performance in realtime.

"Data Channel Status Confirmation Extensions for the Link Management Protocol", Dan Li, Huiying Xu, Fatai Zhang, Snigdho Bardalai, Julien Meuric, Diego Caviglia, 26-May-09. ( bytes)

This document defines simple additions to the Link Management Protocol (LMP) to provide a control plane tool that can assist in the location of stranded resources by allowing adjacent LSRs to confirm data channel statuses, and provides triggers for notifying the management plane if any discrepancies are found. As LMP is already used to verify data plane connectivity, it is considered to be an appropriate candidate to support this feature. Li Expires November 2009 [page 1] draft-ietf-ccamp-confirm-data-channel-status-05.txt May 2009

"RSVP-TE Signaling Extension For Management Plane To Control Plane LSP Handover In A GMPLS Enabled Transport Network.", Diego Caviglia, Daniele Ceccarelli, Dino Bramanti, Dan Li, Snigdho Bardalai, 27-Jul-09. ( bytes)

We would like to dedicate this work to our friend and colleague Dino Bramanti, who passed away at the early age of 38. Dino has been involved in this work since its beginning. In a transport network scenario, where Data Plane connections controlled either by GMPLS Control Plane (Soft Permanent Connections - SPC) or by Management System (Permanent Connections - PC) may independently coexist, the ability of transforming an existing PC into a SPC and vice versa - without actually affecting Data Plane traffic being carried over it - is a requirement [RFC5493]. This memo provides a minor extension to RSVP-TE [RFC2205], [RFC3471], [RFC3473], [RFC4872] signaling protocol, within GMPLS architecture, to enable such connection ownership transfer and describes the defined procedures. Failure conditions and subsequent roll back are also defined taking into account that an handover failure MUST NOT impact the already established data plane connections.

"Generalized Multiprotocol Label Switching (GMPLS) control of Ethernet PBB-TE", Don Fedyk, David Allan, Himanshu Shah, Nabil Bitar, Attila Takacs, Diego Caviglia, Alan McGuire, Nurit Sprecher, Lou Berger, 25-Feb-09. ( bytes)

This specification is complementary to the GMPLS controlled Ethernet architecture document [ARCH] and describes the technology specific aspects of GMPLS control for Provider Backbone Bridge Traffic Engineering (PBB-TE) [IEEE 802.1Qay]. The necessary GMPLS extensions and mechanisms are described to establish Ethernet PBB-TE point to point (P2P) and point to multipoint (P2MP) connections. This document supports, but does not modify, the standard IEEE data plane.

"Generalized MPLS (GMPLS) Support For Metro Ethernet Forum and G.8011 Ethernet Service Switching", Lou Berger, Don Fedyk, 25-Feb-09. ( bytes)

This document describes a method for controlling two specific types of Ethernet switching via Generalized Multi-Protocol Label Switching (GMPLS). This document supports the types of switching implied by the Ethernet services that have been defined in the context of the Metro Ethernet Forum (MEF) and International Telecommunication Union (ITU) G.8011. Specifically, switching in support of Ethernet private line and Ethernet virtual private line services. Support for MEF and ITU defined parameters are also covered.

"Generalized MPLS (GMPLS) Support For Metro Ethernet Forum and G.8011 User-Network Interface (UNI)", Lou Berger, Don Fedyk, 25-Feb-09. ( bytes)

This document describes a method for controlling two specific types of Ethernet switching via a Generalized Multi-Protocol Label Switching (GMPLS) based User-Network Interface (UNI). This document supports the types of switching required by the Ethernet services that have been defined in the context of the Metro Ethernet Forum (MEF) and International Telecommunication Union (ITU) G.8011. This document is the UNI companion to "Generalized MPLS (GMPLS) Support For Metro Ethernet Forum and G.8011 Ethernet Service Switching". This document does not define or limit the underlying intra-domain or Internal NNI (I-NNI) technology used to support the UNI.

"Document: draft-ietf-ccamp-gmpls-g-694-lambda-labels-04.txt", Richard Rabbat, 24-Mar-09. ( bytes)

Technology in the optical domain is constantly evolving and as a consequence new equipment providing lambda switching capability has been developed and is currently being deployed. However, RFC 3471 has defined that a wavelength label (section 3.2.1.1) "only has significance between two neighbors" and global wavelength continuity is not considered. In order to achieve interoperability in a network composed of next generation lambda switch-capable equipment, this document defines a standard lambda label format, being compliant with ITU-T G.694. Moreover some consideration on how to ensure lambda continuity with RSVP-TE is provided. This document is a companion to the Generalized Multi-Protocol Label Switching (GMPLS) signaling. It defines the label format when Lambda Switching is requested in an all optical network.

"Service Provider Requirements for Ethernet control with GMPLS", Wataru Imajuku, Yoshiaki Sone, Muneyoshi Suzuki, Kazuhiro Matsuda, Tomohiro Otani, Kenichi Ogaki, Nabil Bitar, 14-Jun-09. ( bytes)

Generalized Multi-Protocol Label Switching (GMPLS) is applicable to Ethernet switches supporting Provider Backbone Bridge Traffic Engineering (PBB-TE) networks. The GMPLS controlled Ethernet label switch network not only automates creation of Ethernet Label Switched Paths(Eth-LSPs), it also provides sophisticated Eth-LSP recovery Mechanisms such as protection and restoration of an Eth-LSP. This document describes the requirements for the set of solutions of GMPLS controlled Ethernet label switch networks.

"Generalized MPLS (GMPLS) Data Channel Switching Capable (DCSC) and Channel Set Label Extensions", Lou Berger, Don Fedyk, 25-Feb-09. ( bytes)

This document describes two technology-independent extensions to Generalized Multi-Protocol Label Switching. The first extension defines the new switching type Data Channel Switching Capable. Data Channel Switching Capable interfaces are able to support switching of the whole digital channel presented on single channel interfaces. The second extension defines a new type of generalized label and updates related objects. The new label is called the Generalized Channel_Set Label and allows more than one data plane label to be controlled as part of an LSP.

"Routing and Wavelength Assignment Information Model for Wavelength Switched Optical Networks", Greg Bernstein, 10-Jul-09. ( bytes)

This document provides a model of information needed by the routing and wavelength assignment (RWA) process in wavelength switched optical networks (WSONs). The purpose of the information described in this model is to facilitate constrained lightpath computation in WSONs, particularly in cases where there are no or a limited number of wavelength converters available. This model does not include optical impairments.

"Framework for GMPLS and PCE Control of Wavelength Switched Optical Networks (WSON)", Greg Bernstein, 4-Mar-09. ( bytes)

This memo provides a framework for applying Generalized Multi- Protocol Label Switching (GMPLS) and the Path Computation Element (PCE) architecture to the control of wavelength switched optical networks (WSON). In particular we provide control plane models for key wavelength switched optical network subsystems and processes. The subsystems include wavelength division multiplexed links, tunable laser transmitters, reconfigurable optical add/drop multiplexers (ROADM) and wavelength converters. Lightpath provisioning, in general, requires the routing and wavelength assignment (RWA) process. This process is reviewed and the information requirements, both static and dynamic for this process are presented, along with alternative implementation scenarios that could be realized via GMPLS/PCE and/or extended GMPLS/PCE protocols. This memo does NOT address optical impairments in any depth and focuses on topological elements and path selection constraints that are common across different WSON environments. It is expected that a variety of different techniques will be applied to optical impairments depending on the type of WSON, such as access, metro or long haul.

"Routing and Wavelength Assignment Information Encoding for Wavelength Switched Optical Networks", Greg Bernstein, 10-Jul-09. ( bytes)

A wavelength switched optical network (WSON) requires that certain key information elements are made available to facilitate path computation and the establishment of label switching paths (LSPs). The information model described in "Routing and Wavelength Assignment Information for Wavelength Switched Optical Networks" shows what information is required at specific points in the WSON. The information may be used in Generalized Multiprotocol Label Switching (GMPLS) signaling protocols, and may be distributed by GMPLS routing protocols. Other distribution mechanisms (for example, XML-based protocols) may also be used. This document provides efficient, protocol-agnostic encodings for the information elements necessary to operate a WSON. It is intended that protocol-specific documents will reference this memo to describe how information is carried for specific uses.

"OAM Configuration Framework and Requirements for GMPLS RSVP-TE", Attila Takacs, Don Fedyk, He Jia, 9-Mar-09. ( bytes)

OAM is an integral part of transport connections, hence it is required that OAM functions are activated/deactivated in sync with connection commissioning/decommissioning; avoiding spurious alarms and ensuring consistent operation. In certain technologies OAM entities are inherently established once the connection is set up, while other technologies require extra configuration to establish and configure OAM entities. This document specifies extensions to RSVP-TE to support the establishment and configuration of OAM entities along with LSP signaling.

"GMPLS RSVP-TE Extensions for Ethernet OAM Configuration", Attila Takacs, Balazs Gero, Don Fedyk, Dinesh Mohan, Hao Long, 9-Mar-09. ( bytes)

The GMPLS controlled Ethernet Label Switching (GELS) work is extending GMPLS RSVP-TE to support the establishment of Ethernet LSPs. IEEE Ethernet Connectivity Fault Management (CFM) specifies an adjunct OAM flow to check connectivity in Ethernet networks. CFM can be also used with Ethernet LSPs for fault detection and triggering recovery mechanisms. The ITU-T Y.1731 specification builds on CFM and specifies additional OAM mechanisms, including Performance Monitoring, for Ethernet networks. This document specifies extensions of GMPLS RSVP-TE to support the setup of the associated Ethernet OAM (CFM and Y.1731) entities adding a technology specific TLV to [OAM-CONF-FWK].

"A Framework for the Control of Wavelength Switched Optical Networks (WSON) with Impairments", Greg Bernstein, 29-Jun-09. ( bytes)

The operation of optical networks requires information on the physical characterization of optical network elements, subsystems, devices, and cabling. These physical characteristics may be important to consider when using a GMPLS control plane to support path setup and maintenance. This document discusses how the definition and characterization of optical fiber, devices, subsystems, and network elements contained in various ITU-T recommendations can be combined with GMPLS control plane protocols and mechanisms to support Impairment Aware Routing and Wavelength Assignment (IA-RWA) in optical networks.

Return to Internet-Draft directory.

Return to IETF home page.