Virtual Router Redundancy Protocol (vrrp)
NOTE: This charter is a snapshot of the . It may now be out-of-date.
Last Modified: 2007-04-02
Radia Perlman <email@example.com>
Mukesh Gupta <firstname.lastname@example.org>
Routing Area Director(s):
Ross Callon <email@example.com>
David Ward <firstname.lastname@example.org>
Routing Area Advisor:
David Ward <email@example.com>
General Discussion: firstname.lastname@example.org
To Subscribe: email@example.com
In Body: subscribe vrrp
Description of Working Group:
The purpose of this working group is to define and develop a standard
virtual router redundancy protocol for IPv4 and IPv6. A virtual
router redundancy protocol is a protocol which allows several
routers on a multiaccess link to utilize the same virtual IP address.
One router will be elected as a master with the other routers acting as
backups in case of the failure of the master router. The primary
motivation to using a virtual router redundancy protocol is that host
systems may be configured (manually or via DHCP) with a single default
gateway, rather than running an active routing protocol. The protocol
should also support the ability to load share traffic when both routers
The goals of this working group are:
1. Define and develop a standard virtual router redundancy protocol
for IPv4 and IPv6.
2. Develop VRRP MIB(s).
3. Separate specifications will be developed for IPv4 and IPv6.
4. Determine whether static (configuration based) load sharing is
adequate or if some amount of dynamic load sharing is required.
5. Working group will examine security issues to determine what
security threats it is appropriate for the VRRP protocol to
handle and include the appropriate mechanisms in the VRRP protocol.
6. The internet draft "Virtual Router Redundancy Protocol"
(draft-hinden-vrrp-00.txt) will be use as the basis of virtual
router redundancy protocol. The working group will also consider
other Internet-Drafts related to this topic allowing for issues
regarding change control, security, running code, etc.
7. Intellectual property issues regarding the technology to
develop a virtual router redundancy protocol will be identified
Goals and Milestones:
|Done|| ||Charter Working Group |
|Done|| ||Issue new Internet Drafts for IPv4 version of the protocol. |
|Done|| ||Review and finalize IPv4 Internet Drafts. |
|Done|| ||Issue Internet Draft for IPv6 version of VRRP. |
|Done|| ||Submit revised IPv4 Internet Drafts to IESG for proposed
|Done|| ||Issue VRRP MIB drafts. |
|Done|| ||Issue revised draft for IPv6 version of VRRP. |
|Done|| ||Finalize MIB draft and submit to IESG. |
|Done|| ||Resolve open issues with authentication methods |
|Done|| ||Issue VRRPv3 (VRRP for IPv6) MIB drafts |
|Done|| ||Submit updated version of VRRP (IPv4) for Draft Standard |
|Done|| ||Decide on the VRRP MIB draft (unified or separated MIBs) |
|Done|| ||Resolve ND vs VMACs issue with VRRPv3 |
|Done|| ||Submit MIB for VRRPv3 for Proposed Standard |
|Done|| ||Submit VRRP for IPv6 (VRRPv3) for Proposed Standard |
|Nov 2004|| ||Review the WG goals and future potential |
Request For Comments:
|RFC2338|| PS ||Virtual Router Redundancy Protocol |
|RFC2787|| PS ||Definitions of Managed Objects for the Virtual Router
Redundancy Protocol using SNMPv2 |
|RFC3768|| Standard ||Virtual Router Redundancy Protocol |