Network Working Group G. Zorn Request for Comments: 2867 Cisco Systems, Inc. Category: Informational B. Aboba Updates: 2866 Microsoft Corporation D. Mitton Nortel Networks June 2000 RADIUS Accounting Modifications for Tunnel Protocol Support Status of this Memo This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited. Copyright Notice Copyright (C) The Internet Society (2000). All Rights Reserved. Abstract This document defines new RADIUS accounting Attributes and new values for the existing Acct-Status-Type Attribute [1] designed to support the provision of compulsory tunneling in dial-up networks. Specification of Requirements In this document, the key words "MAY", "MUST, "MUST NOT", "optional", "recommended", "SHOULD", and "SHOULD NOT", are to be interpreted as described in [2]. 1. Introduction Many applications of tunneling protocols such as PPTP [5] and L2TP [4] involve dial-up network access. Some, such as the provision of secure access to corporate intranets via the Internet, are characterized by voluntary tunneling: the tunnel is created at the request of the user for a specific purpose. Other applications involve compulsory tunneling: the tunnel is created without any action from the user and without allowing the user any choice in the matter, as a service of the Internet service provider (ISP). Typically, ISPs providing a service want to collect data regarding that service for billing, network planning, etc. One way to collect usage data in dial-up networks is by means of RADIUS Accounting [1]. The use of RADIUS Accounting allows dial-up usage data to be collected at a central location, rather than stored on each NAS. Zorn, et al. Informational [Page 1] RFC 2867 RADIUS Tunnel Accounting Support June 2000 In order to collect usage data regarding tunneling, new RADIUS attributes are needed; this document defines these attributes. In addition, several new values for the Acct-Status-Type attribute are proposed. Specific recommendations for, and examples of, the application of this attribute for the L2TP protocol can be found in RFC 2809. 2. Implementation Notes Compulsory tunneling may be part of a package of services provided by one entity to another. For example, a corporation might contract with an ISP to provide remote intranet access to its employees via compulsory tunneling. In this case, the integration of RADIUS and tunnel protocols allows the ISP and the corporation to synchronize their accounting activities so that each side receives a record of the user's resource consumption. This provides the corporation with the means to audit ISP bills. In auditing, the User-Name, Acct-Tunnel-Connection, Tunnel-Client- Endpoint and Tunnel-Server-Endpoint attributes are typically used to uniquely identify the call, allowing the Accounting-Request sent by the NAS to be reconciled with the corresponding Accounting-Request sent by the tunnel server. When implementing RADIUS accounting for L2TP/PPTP tunneling, the Call-Serial-Number SHOULD be used in the Acct-Tunnel-Connection attribute. In L2TP, the Call-Serial-Number is a 32-bit field and in PPTP it is a 16-bit field. In PPTP the combination of IP Address and Call-Serial-Number SHOULD be unique, but this is not required. In addition, no method for determining the Call-Serial-Number is specified, which leaves open the possibility of wrapping after a reboot. Note that a 16-bit Call-Serial-Number is not sufficient to distinguish a given call from all other calls over an extended time period. For example, if the Call-Serial-Number is assigned monotonically, the NAS in question has 96 ports which are continually busy and the average call is of 20 minutes duration, then a 16-bit Call-Serial-Number will wrap within 65536/(96 * 3 calls/hour * 24 hours/day) = 9.48 days. 3. New Acct-Status-Type Values 3.1. Tunnel-Start Value 9 Zorn, et al. Informational [Page 2] RFC 2867 RADIUS Tunnel Accounting Support June 2000 Description This value MAY be used to mark the establishment of a tunnel with another node. If this value is used, the following attributes SHOULD also be included in the Accounting-Request packet: User-Name (1) NAS-IP-Address (4) Acct-Delay-Time (41) Event-Timestamp (55) Tunnel-Type (64) Tunnel-Medium-Type (65) Tunnel-Client-Endpoint (66) Tunnel-Server-Endpoint (67) Acct-Tunnel-Connection (68) 3.2. Tunnel-Stop Value 10 Description This value MAY be used to mark the destruction of a tunnel to or from another node. If this value is used, the following attributes SHOULD also be included in the Accounting-Request packet: User-Name (1) NAS-IP-Address (4) Acct-Delay-Time (41) Acct-Input-Octets (42) Acct-Output-Octets (43) Acct-Session-Id (44) Acct-Session-Time (46) Acct-Input-Packets (47) Acct-Output-Packets (48) Acct-Terminate-Cause (49) Acct-Multi-Session-Id (51) Event-Timestamp (55) Tunnel-Type (64) Tunnel-Medium-Type (65) Tunnel-Client-Endpoint (66) Tunnel-Server-Endpoint (67) Acct-Tunnel-Connection (68) Acct-Tunnel-Packets-Lost (86) Zorn, et al. Informational [Page 3] RFC 2867 RADIUS Tunnel Accounting Support June 2000 3.3. Tunnel-Reject Value 11 Description This value MAY be used to mark the rejection of the establishment of a tunnel with another node. If this value is used, the following attributes SHOULD also be included in the Accounting-Request packet: User-Name (1) NAS-IP-Address (4) Acct-Delay-Time (41) Acct-Terminate-Cause (49) Event-Timestamp (55) Tunnel-Type (64) Tunnel-Medium-Type (65) Tunnel-Client-Endpoint (66) Tunnel-Server-Endpoint (67) Acct-Tunnel-Connection (68) 3.4. Tunnel-Link-Start Value 12 Description This value MAY be used to mark the creation of a tunnel link. Only some tunnel types (e.g., L2TP) support multiple links per tunnel. This Attribute is intended to mark the creation of a link within a tunnel that carries multiple links. For example, if a mandatory tunnel were to carry M links over its lifetime, 2(M+1) RADIUS Accounting messages might be sent: one each marking the initiation and destruction of the tunnel itself and one each for the initiation and destruction of each link within the tunnel. If only a single link can be carried in a given tunnel (e.g., IPsec in the tunnel mode), this Attribute need not be included in accounting packets, since the presence of the Tunnel-Start Attribute will imply the initiation of the (only possible) link. Zorn, et al. Informational [Page 4] RFC 2867 RADIUS Tunnel Accounting Support June 2000 If this value is used, the following attributes SHOULD also be included in the Accounting-Request packet: User-Name (1) NAS-IP-Address (4) NAS-Port (5) Acct-Delay-Time (41) Event-Timestamp (55) Tunnel-Type (64) Tunnel-Medium-Type (65) Tunnel-Client-Endpoint (66) Tunnel-Server-Endpoint (67) Acct-Tunnel-Connection (68) 3.5. Tunnel-Link-Stop Value 13 Description This value MAY be used to mark the destruction of a tunnel link. Only some tunnel types (e.g., L2TP) support multiple links per tunnel. This Attribute is intended to mark the destruction of a link within a tunnel that carries multiple links. For example, if a mandatory tunnel were to carry M links over its lifetime, 2(M+1) RADIUS Accounting messages might be sent: one each marking the initiation and destruction of the tunnel itself and one each for the initiation and destruction of each link within the tunnel. If only a single link can be carried in a given tunnel (e.g., IPsec in the tunnel mode), this Attribute need not be included in accounting packets, since the presence of the Tunnel-Stop Attribute will imply the termination of the (only possible) link. If this value is used, the following attributes SHOULD also be included in the Accounting-Request packet: User-Name (1) NAS-IP-Address (4) NAS-Port (5) Acct-Delay-Time (41) Acct-Input-Octets (42) Acct-Output-Octets (43) Acct-Session-Id (44) Acct-Session-Time (46) Acct-Input-Packets (47) Zorn, et al. Informational [Page 5] RFC 2867 RADIUS Tunnel Accounting Support June 2000 Acct-Output-Packets (48) Acct-Terminate-Cause (49) Acct-Multi-Session-Id (51) Event-Timestamp (55) NAS-Port-Type (61) Tunnel-Type (64) Tunnel-Medium-Type (65) Tunnel-Client-Endpoint (66) Tunnel-Server-Endpoint (67) Acct-Tunnel-Connection (68) Acct-Tunnel-Packets-Lost (86) 3.6. Tunnel-Link-Reject Value 14 Description This value MAY be used to mark the rejection of the establishment of a new link in an existing tunnel. Only some tunnel types (e.g., L2TP) support multiple links per tunnel. If only a single link can be carried in a given tunnel (e.g., IPsec in the tunnel mode), this Attribute need not be included in accounting packets, since in this case the Tunnel-Reject Attribute has the same meaning. If this value is used, the following attributes SHOULD also be included in the Accounting-Request packet: User-Name (1) NAS-IP-Address (4) Acct-Delay-Time (41) Acct-Terminate-Cause (49) Event-Timestamp (55) Tunnel-Type (64) Tunnel-Medium-Type (65) Tunnel-Client-Endpoint (66) Tunnel-Server-Endpoint (67) Acct-Tunnel-Connection (68) Zorn, et al. Informational [Page 6] RFC 2867 RADIUS Tunnel Accounting Support June 2000 4. Attributes 4.1. Acct-Tunnel-Connection Description This Attribute indicates the identifier assigned to the tunnel session. It SHOULD be included in Accounting-Request packets which contain an Acct-Status-Type attribute having the value Start, Stop or any of the values described above. This attribute, along with the Tunnel-Client-Endpoint and Tunnel- Server-Endpoint attributes [3], may be used to provide a means to uniquely identify a tunnel session for auditing purposes. A summary of the Acct-Tunnel-Connection Attribute format is shown below. The fields are transmitted from left to right. 0 1 2 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type | Length | String ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Type 68 for Acct-Tunnel-Connection Length >= 3 String The format of the identifier represented by the String field depends upon the value of the Tunnel-Type attribute [3]. For example, to fully identify an L2TP tunnel connection, the L2TP Tunnel ID and Call ID might be encoded in this field. The exact encoding of this field is implementation dependent. 4.2. Acct-Tunnel-Packets-Lost Description This Attribute indicates the number of packets lost on a given link. It SHOULD be included in Accounting-Request packets which contain an Acct-Status-Type attribute having the value Tunnel-Link-Stop. Zorn, et al. Informational [Page 7] RFC 2867 RADIUS Tunnel Accounting Support June 2000 A summary of the Acct-Tunnel-Packets-Lost Attribute format is shown below. The fields are transmitted from left to right. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type | Length | Lost +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Lost (cont) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Type 86 for Acct-Tunnel-Packets-Lost Length 6 Lost The Lost field is 4 octets in length and represents the number of packets lost on the link. 5. Table of Attributes The following table provides a guide to which attributes may be found in Accounting-Request packets. No tunnel attributes should be found in Accounting-Response packets. Request # Attribute 0-1 64 Tunnel-Type 0-1 65 Tunnel-Medium-Type 0-1 66 Tunnel-Client-Endpoint 0-1 67 Tunnel-Server-Endpoint 0-1 68 Acct-Tunnel-Connection 0 69 Tunnel-Password 0-1 81 Tunnel-Private-Group-ID 0-1 82 Tunnel-Assignment-ID 0 83 Tunnel-Preference 0-1 86 Acct-Tunnel-Packets-Lost Zorn, et al. Informational [Page 8] RFC 2867 RADIUS Tunnel Accounting Support June 2000 The following table defines the meaning of the above table entries. 0 This attribute MUST NOT be present in packet. 0+ Zero or more instances of this attribute MAY be present in packet. 0-1 Zero or one instance of this attribute MAY be present in packet. 6. Security Considerations By "sniffing" RADIUS Accounting packets, it might be possible for an eavesdropper to perform a passive analysis of tunnel connections. 7. References [1] Rigney, C., "RADIUS Accounting", RFC 2866, June 2000. [2] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [3] Zorn, G., Leifer, D., Rubens, A., Shriver, J., Holdrege, M. and I. Goyret, "RADIUS Attributes for Tunnel Protocol Support", RFC 2868, June 2000. [4] Townsley, W., Valencia, A., Rubens, A., Pall, G., Zorn, G. and B. Palter, "Layer Two Tunneling Protocol "L2TP"", RFC 2661, August 1999. [5] Hamzeh, K., Pall, G., Verthein, W., Taarud, J., Little, W. and G. Zorn, "Point-to-Point Tunneling Protocol (PPTP)", RFC 2637, July 1999. 8. Acknowledgments Thanks to Aydin Edguer, Ly Loi, Matt Holdrege and Gurdeep Singh Pall for salient input and review. Zorn, et al. Informational [Page 9] RFC 2867 RADIUS Tunnel Accounting Support June 2000 9. Authors' Addresses Questions about this memo can be directed to: Glen Zorn Cisco Systems, Inc. 500 108th Avenue N.E., Suite 500 Bellevue, Washington 98004 USA Phone: +1 425 438 8218 FAX: +1 425 438 1848 EMail: gwz@cisco.com Dave Mitton Nortel Networks 880 Technology Park Drive Billerica, MA 01821 Phone: +1 978 288 4570 Fax: +1 978 288 3030 EMail: dmitton@nortelnetworks.com Bernard Aboba Microsoft Corporation One Microsoft Way Redmond, Washington 98052 Phone: +1 425 936 6605 Fax: +1 425 936 7329 EMail: aboba@internaut.com Zorn, et al. Informational [Page 10] RFC 2867 RADIUS Tunnel Accounting Support June 2000 10. Full Copyright Statement Copyright (C) The Internet Society (2000). All Rights Reserved. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English. The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns. This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society. Zorn, et al. Informational [Page 11]