Network Working Group M.P. Andrews
Internet-Draft ISC
Intended status: Standards Track May 09, 2011
Expires: November 10, 2011

6to4 DHCP Router Option
draft-andrews-v6ops-6to4-router-option-00

Abstract

Provides a DHCP 6to4 Relay Router option.

Status of this Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on November 10, 2011.

Copyright Notice

Copyright (c) 2011 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.


Table of Contents

1. Introduction

Using 6to4 [RFC 3056] currently requires manual configuration of the relay router or the use of a anycast relay router [RFC 3068]. The latter has a number of well known issues (add reference).

This document attempts to address some of those issues by providing a method for clients to discover the address of a 6to4 relay router. It is expected that the 6to4 relay router will be managed and that it will be topologically close to the client thereby reducing some of the issues with using public anycast relay routers.

Additionally not all IPv4 address allocated to clients are suitable for use with 6to4. Whether they be [RFC 1918] address, or other addresses behind a NAT, or are behind a firewall which blocks 6to4 encapsulted traffic. This document provides a method for the DHCP server operator to signal that the address being returned is not suitable for use with 6to4.

2. 6to4 Relay Router Option

The 6to4 DHCP relay option has code TBD and consists of a single IPv4 address specifing the IPv4 address of the 6to4 relay router. Setting the relay router address to 0.0.0.0 indicates that 6to4 will not work for returned lease address.

    0                   1                   2                   3
    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |      TBD      |       4       |          relay router         ~
   +---------------+---------------+---------------+---------------+
   ~            address            |
   +-------------------------------+
	

3. IANA Considerations

IANA is requested to allocate a DHCP option code point.

4. Security Considerations

A rogue DHCP server advertising this option can cause 6to4 traffic to be redirected anywhere in the world.

Setting the returned address to 0.0.0.0 can be used to deny 6to4 service when it would otherwise work.

5. References

[RFC 1918] Rekhter, Y., Moskowitz, B., Karrenberg, D., de Groot, G. J. and E. Lear, "Address Allocation for Private Internets", BCP 5, RFC 1918, February 1996.
[RFC 3056] Carpenter, B. and K. Moore, "Connection of IPv6 Domains via IPv4 Clouds", RFC 3056, February 2001.
[RFC 3068] Huitema, C., "An Anycast Prefix for 6to4 Relay Routers", RFC 3068, June 2001.

Author's Address

Mark P. Andrews Internet Systems Consortium 950 Charter Street Redwood City, CA 94063 US EMail: marka@isc.org