TOC 
IPFIX Working GroupE. Boschi
Internet-DraftB. Trammell
Intended status: ExperimentalHitachi Europe
Expires: January 8, 2009July 7, 2008


IP Flow Anonymisation Support
draft-boschi-ipfix-anon-00.txt

Status of this Memo

By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”

The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt.

The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html.

This Internet-Draft will expire on January 8, 2009.

Abstract

This document describes anonymisation techniques for IP flow data. It provides a categorization of common anomymisation schemes and defines the parameters needed to describe them. It describes support for anonymization within the IPFIX protocol, providing the basis for the definition of information models for configuring anonymisation techniques within an IPFIX Metering or Exporting Process, and for reporting the technique in use to an IPFIX Collecting Process.



Table of Contents

1.  Introduction
    1.1.  IPFIX Protocol Overview
    1.2.  IPFIX Documents Overview
2.  Terminology
3.  Categorisation of Anonymisation Techniques
4.  Anonymisation of IP Flow Data
    4.1.  IP Address Anonymisation
    4.2.  Timestamp Anonymisation
    4.3.  Anonymisation of Other Flow Fields
5.  Parameters for the Description of Anonymisation Techniques
6.  Anonymisation Support in IPFIX
7.  Security Considerations
8.  IANA Considerations
9.  References
    9.1.  Normative References
    9.2.  Informative References
§  Authors' Addresses
§  Intellectual Property and Copyright Statements




 TOC 

1.  Introduction

The standardisation of an IP flow information export protocol [RFC5101] (Claise, B., “Specification of the IP Flow Information Export (IPFIX) Protocol for the Exchange of IP Traffic Flow Information,” January 2008.) and associated representations removes a technical barrier to the sharing of IP flow data across organizational boundaries and with network operations, security, and research communities for a wide variety of purposes. However, with wider dissemination comes greater risks to the privacy of the users of networks under measurement, and to the security of those networks. While it is not a complete solution to the issues posed by distribution of IP flow information, anonymisation is an important tool for the protection of privacy within network measurement infrastructures. Additionally, various jurisdictions define data protection laws and regulations that flow measurement activities must comply with, and anonymisation may be a part of such compliance [IMC07, FloCon08].

This document presents a mechanism for representing anonymised data within IPFIX and guidelines for using it. It begins with a categorization of anonymisation techniques. It then describes applicability of each technique to commonly anonymisable fields of IP flow data, organized by information element data type and semantics as in [RFC5102] (Quittek, J., Bryant, S., Claise, B., Aitken, P., and J. Meyer, “Information Model for IP Flow Information Export,” January 2008.); enumerates the parameters required by each of the applicable anonymisation techniques; and provides guidelines for the use of each of these techniques in accordance with best practices in data protection. Finally, it specifies a mechanism for exporting anonymised data and binding anonymisation metadata to templates using IPFIX Options.



 TOC 

1.1.  IPFIX Protocol Overview

In the IPFIX protocol, { type, length, value } tuples are expressed in templates containing { type, length } pairs, specifying which { value } fields are present in data records conforming to the Template, giving great flexibility as to what data is transmitted.

Since Templates are sent very infrequently compared with Data Records, this results in significant bandwidth savings.

Different Data Records may be transmitted simply by sending new Templates specifying the { type, length } pairs for the new data format. See [RFC5101] (Claise, B., “Specification of the IP Flow Information Export (IPFIX) Protocol for the Exchange of IP Traffic Flow Information,” January 2008.) for more information.

The IPFIX information model (Quittek, J., Bryant, S., Claise, B., Aitken, P., and J. Meyer, “Information Model for IP Flow Information Export,” January 2008.) [RFC5102] defines a large number of standard Information Elements which provide the necessary { type } information for Templates.

The use of standard elements enables interoperability among different vendors' implementations. Additionally, non-standard enterprise-specific elements may be defined for private use.



 TOC 

1.2.  IPFIX Documents Overview

"Specification of the IPFIX Protocol for the Exchange of IP Traffic Flow Information" (Claise, B., “Specification of the IP Flow Information Export (IPFIX) Protocol for the Exchange of IP Traffic Flow Information,” January 2008.) [RFC5101] (informally, the IPFIX Protocol document) and its associated documents define the IPFIX Protocol, which provides network engineers and administrators with access to IP traffic flow information.

"Architecture for IP Flow Information Export" (Sadasivan, G. and N. Brownlee, “Architecture Model for IP Flow Information Export,” October 2003.) [I‑D.ietf‑ipfix‑arch] (the IPFIX Architecture document) defines the architecture for the export of measured IP flow information out of an IPFIX Exporting Process to an IPFIX Collecting Process, and the basic terminology used to describe the elements of this architecture, per the requirements defined in "Requirements for IP Flow Information Export" (Quittek, J., Zseby, T., Claise, B., and S. Zander, “Requirements for IP Flow Information Export (IPFIX),” October 2004.) [RFC3917]. The IPFIX Protocol document [RFC5101] (Claise, B., “Specification of the IP Flow Information Export (IPFIX) Protocol for the Exchange of IP Traffic Flow Information,” January 2008.) then covers the details of the method for transporting IPFIX Data Records and Templates via a congestion-aware transport protocol from an IPFIX Exporting Process to an IPFIX Collecting Process.

"Information Model for IP Flow Information Export" (Quittek, J., Bryant, S., Claise, B., Aitken, P., and J. Meyer, “Information Model for IP Flow Information Export,” January 2008.) [RFC5102] (informally, the IPFIX Information Model document) describes the Information Elements used by IPFIX, including details on Information Element naming, numbering, and data type encoding. Finally, "IPFIX Applicability" (Zseby, T., “IPFIX Applicability,” July 2007.) [I‑D.ietf‑ipfix‑as] describes the various applications of the IPFIX protocol and their use of information exported via IPFIX, and relates the IPFIX architecture to other measurement architectures and frameworks.

This document references the Protocol and Architecture documents for terminology and extends the IPFIX Information Model to provide new Information Elements for anonymisation metadata.



 TOC 

2.  Terminology

The terminology used in this document is fully aligned with the terminology defined in [RFC5101] (Claise, B., “Specification of the IP Flow Information Export (IPFIX) Protocol for the Exchange of IP Traffic Flow Information,” January 2008.). Therefore, the terms defined in the IPFIX terminology are capitalized in this document, as in other IPFIX drafts ([RFC5101] (Claise, B., “Specification of the IP Flow Information Export (IPFIX) Protocol for the Exchange of IP Traffic Flow Information,” January 2008.), [RFC5102] (Quittek, J., Bryant, S., Claise, B., Aitken, P., and J. Meyer, “Information Model for IP Flow Information Export,” January 2008.)).

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.) [RFC2119].



 TOC 

3.  Categorisation of Anonymisation Techniques

Anonymisation modifies a data set in order to protect the identity of the people or entities described by the data set from disclosure. With respect to network traffic data, anonymisation generally attempts to preserve some set of properties of the network traffic useful for a given application or applications, while ensuring the data cannot be traced back to the specific networks, hosts, or users generating the traffic.

Anonymisation may be broadly split into three categories: generalisation and reversible or irreversible substitution. When generalisation is used, identifying information is grouped in sets, and one single value is used to identify each set element. Note that this may cause multiple records to become indistinguishable, thereby aggregating them into a single record. Generalisation is an irreversible operation, in that the information needed to identify a single record from its "generalised value" is lost.

Substitution (or pseudonymization) substitutes a false identifier for a real one, and can be reversible or irreversible. Reversible substitution uses an invertible or otherwise reversible function, so that the real identifier may be recovered later. Irreversible substitution, likewise, uses a one-way or randomising function, so that the real identifier cannot be recovered.

While anonymisation is generally applied at the resolution of single fields within a record, attacks against anonymisation use entire records and relationships between records within a data set. Therefore, fields which may not necessarily be identifying by themselves may be anonymised in order to increase the anonymity of the data set as a whole.



 TOC 

4.  Anonymisation of IP Flow Data

Due to the restricted semantics of IP flow data, there are a relatively limited set of specific anonymisation techniques available on flow data, though each falls into the broad categories above. Each type of field that may commonly appear in a flow record may have its own applicable specific techniques.

Of all the fields in an IP flow record, the most attention in the literature has been paid to IP addresses [TODO: cite]. IP addresses are structured identifiers, that is, partial IP address prefixes may be used to identify networks just as full IP addresses identify hosts. This leads to the application of prefix-preserving anonymisation of IP address information [TODO: cite]. Prefix-preserving anonymisation is a (generally irreversible) substitution technique which has the additional property that the structure of the IP address space is maintained in the anonymised data.

While not identifiers in and of themselves, timestamps are vulnerable to fingerprinting attacks, wherein relationships between the start and end timestamps of flows within a data set can be used to identify hosts or networks [TODO: cite]. Therefore, a variety of anonymisation techniques are available, including loss of precision (a form of generalisation), or noise addition (substitution), which may or may not preserve the sequencing of flows in the data set.

Counters and other flow values can also be used to break anonymisation in fingerprinting attacks, so the same techniques, precision loss and noise addition, are available for these fields as well.

Of course, the simplest form of anomymisation and the most extreme form of generalisation is black-marker anonymisation, or full deletion of a field from each record of the flow data. The black marker technique is available on any type of field in a flow record.

[TODO: This section is incomplete; the set of techniques should be more exhaustive.]



 TOC 

4.1.  IP Address Anonymisation

The following table gives an overview of the schemes for IP address anonymization described in this document and their categorization.

SchemeActionReversibility
Truncation Generalisation N
Scrambling Substitution Y
Prefix-preserving Substitution Y
Random noise addition Substitution N

[TODO: This section is incomplete; text here should expand on the table.]



 TOC 

4.2.  Timestamp Anonymisation

[TODO: as section 4.1]

[EDITOR'S NOTE: Counters might go here, since they are subject to the same techniques for largely the same reasons.]



 TOC 

4.3.  Anonymisation of Other Flow Fields

[TODO: as section 4.1]

[EDITOR'S NOTE: Port Numbers go here. Counters might, if not above. It might make sense to split this into flow key anonymisation versus flow value anonymisation.]



 TOC 

5.  Parameters for the Description of Anonymisation Techniques

[TODO: see corresponding section of draft-ietf-psamp-sample-tech for the proposed structure of this section.]



 TOC 

6.  Anonymisation Support in IPFIX

[TODO: Here we'll describe how the information specified above can be transmitted on the wire using an option template. The idea is to scope the option to the Template ID and for each field specify which are anonymised, providing info on the output characteristics of the technique, and which ones aren't.]

[EDITOR'S NOTE: Multiple anon. techniques applied on an IE at the same time is indicated with multiple elements of the same type (in application order as in PSAMP)]

[EDITOR'S NOTE: for blackmarking we'll recommend not to export the information at all following the data protection law principle that only necessary information should be exported.]



 TOC 

7.  Security Considerations

[TODO: write this section.]



 TOC 

8.  IANA Considerations

This document contains no actions for IANA.



 TOC 

9.  References



 TOC 

9.1. Normative References

[RFC5101] Claise, B., “Specification of the IP Flow Information Export (IPFIX) Protocol for the Exchange of IP Traffic Flow Information,” RFC 5101, January 2008 (TXT).
[RFC5102] Quittek, J., Bryant, S., Claise, B., Aitken, P., and J. Meyer, “Information Model for IP Flow Information Export,” RFC 5102, January 2008 (TXT).


 TOC 

9.2. Informative References

[I-D.ietf-ipfix-arch] Sadasivan, G. and N. Brownlee, “Architecture Model for IP Flow Information Export,” draft-ietf-ipfix-arch-02 (work in progress), October 2003 (TXT).
[I-D.ietf-ipfix-as] Zseby, T., “IPFIX Applicability,” draft-ietf-ipfix-as-12 (work in progress), July 2007 (TXT).
[I-D.ietf-ipfix-architecture] Sadasivan, G., “Architecture for IP Flow Information Export,” draft-ietf-ipfix-architecture-12 (work in progress), September 2006 (TXT).
[I-D.ietf-ipfix-reducing-redundancy] Boschi, E., “Reducing Redundancy in IP Flow Information Export (IPFIX) and Packet Sampling (PSAMP) Reports,” draft-ietf-ipfix-reducing-redundancy-04 (work in progress), May 2007 (TXT).
[RFC3917] Quittek, J., Zseby, T., Claise, B., and S. Zander, “Requirements for IP Flow Information Export (IPFIX),” RFC 3917, October 2004 (TXT).
[RFC2119] Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” BCP 14, RFC 2119, March 1997 (TXT, HTML, XML).


 TOC 

Authors' Addresses

  Elisa Boschi
  Hitachi Europe
  c/o ETH Zurich
  Gloriastrasse 35
  8092 Zurich
  Switzerland
Phone:  +41 44 632 70 57
Email:  elisa.boschi@hitachi-eu.com
  
  Brian Trammell
  Hitachi Europe
  c/o ETH Zurich
  Gloriastrasse 35
  8092 Zurich
  Switzerland
Phone:  +41 44 632 70 13
Email:  trammell@tik.ee.ethz.ch


 TOC 

Full Copyright Statement

Intellectual Property