None P. Schwabe
Internet-Draft MPI-SP & Radboud University
Intended status: Informational B. E. Westerbaan
Expires: 27 March 2024 Cloudflare
24 September 2023
Kyber Post-Quantum KEM
draft-cfrg-schwabe-kyber-03
Abstract
This memo specifies a preliminary version ("draft00", "v3.02") of
Kyber, an IND-CCA2 secure Key Encapsulation Method.
About This Document
This note is to be removed before publishing as an RFC.
The latest revision of this draft can be found at
https://bwesterb.github.io/draft-schwabe-cfrg-kyber/draft-cfrg-
schwabe-kyber.html. Status information for this document may be
found at https://datatracker.ietf.org/doc/draft-cfrg-schwabe-kyber/.
Source for this draft and an issue tracker can be found at
https://github.com/bwesterb/draft-schwabe-cfrg-kyber.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on 27 March 2024.
Copyright Notice
Copyright (c) 2023 IETF Trust and the persons identified as the
document authors. All rights reserved.
Schwabe & Westerbaan Expires 27 March 2024 [Page 1]
Internet-Draft kyber September 2023
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents (https://trustee.ietf.org/
license-info) in effect on the date of publication of this document.
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document. Code Components
extracted from this document must include Revised BSD License text as
described in Section 4.e of the Trust Legal Provisions and are
provided without warranty as described in the Revised BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1. Warning on stability and relation to ML-KEM . . . . . . . 3
2. Conventions and Definitions . . . . . . . . . . . . . . . . . 4
3. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4. The field GF(q) . . . . . . . . . . . . . . . . . . . . . . . 5
4.1. Size . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4.2. Compression . . . . . . . . . . . . . . . . . . . . . . . 6
5. The ring Rq . . . . . . . . . . . . . . . . . . . . . . . . . 7
5.1. Operations . . . . . . . . . . . . . . . . . . . . . . . 7
5.1.1. Size of polynomials . . . . . . . . . . . . . . . . . 7
5.1.2. Addition and subtraction . . . . . . . . . . . . . . 7
5.1.3. Multiplication . . . . . . . . . . . . . . . . . . . 8
6. Symmetric cryptographic primitives . . . . . . . . . . . . . 12
7. Sampling of polynomials . . . . . . . . . . . . . . . . . . . 12
7.1. Uniformly . . . . . . . . . . . . . . . . . . . . . . . . 12
7.1.1. sampleMatrix . . . . . . . . . . . . . . . . . . . . 13
7.2. From a binomial distribution . . . . . . . . . . . . . . 13
7.2.1. sampleNoise . . . . . . . . . . . . . . . . . . . . . 14
8. Vector and matrices . . . . . . . . . . . . . . . . . . . . . 14
8.1. Operations on vectors . . . . . . . . . . . . . . . . . . 14
8.2. Dot product and matrix multiplication . . . . . . . . . . 14
8.3. Transpose . . . . . . . . . . . . . . . . . . . . . . . . 15
9. Serialization . . . . . . . . . . . . . . . . . . . . . . . . 15
9.1. OctetsToBits . . . . . . . . . . . . . . . . . . . . . . 15
9.2. Encode and Decode . . . . . . . . . . . . . . . . . . . . 15
9.2.1. Polynomials . . . . . . . . . . . . . . . . . . . . . 15
9.2.2. Vectors . . . . . . . . . . . . . . . . . . . . . . . 16
10. Inner malleable public-key encryption scheme . . . . . . . . 16
10.1. Parameters . . . . . . . . . . . . . . . . . . . . . . . 16
10.2. Key generation . . . . . . . . . . . . . . . . . . . . . 16
10.3. Encryption . . . . . . . . . . . . . . . . . . . . . . . 17
10.4. Decryption . . . . . . . . . . . . . . . . . . . . . . . 18
11. Kyber . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
11.1. Key generation . . . . . . . . . . . . . . . . . . . . . 19
11.2. Encapsulation . . . . . . . . . . . . . . . . . . . . . 19
11.3. Decapsulation . . . . . . . . . . . . . . . . . . . . . 19
12. Parameter sets . . . . . . . . . . . . . . . . . . . . . . . 20
Schwabe & Westerbaan Expires 27 March 2024 [Page 2]
Internet-Draft kyber September 2023
13. Machine-readable specification . . . . . . . . . . . . . . . 22
14. Security Considerations . . . . . . . . . . . . . . . . . . . 29
15. References . . . . . . . . . . . . . . . . . . . . . . . . . 29
15.1. Normative References . . . . . . . . . . . . . . . . . . 29
15.2. Informative References . . . . . . . . . . . . . . . . . 29
Appendix A. Acknowledgments . . . . . . . . . . . . . . . . . . 31
Appendix B. Change Log . . . . . . . . . . . . . . . . . . . . . 31
B.1. Since draft-schwabe-cfrg-kyber-02 . . . . . . . . . . . . 31
B.2. Since draft-schwabe-cfrg-kyber-01 . . . . . . . . . . . . 31
B.3. Since draft-schwabe-cfrg-kyber-00 . . . . . . . . . . . . 31
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 32
1. Introduction
Kyber is NIST's pick for a post-quantum key agreement [NISTR3].
Kyber is not a Diffie-Hellman (DH) style non-interactive key
agreement, but instead, Kyber is a Key Encapsulation Method (KEM). A
KEM is a three-tuple of algorithms (_KeyGen_, _Encapsulate_,
_Decapsulate_):
* _KeyGen_ takes no inputs and generates a private key and a public
key;
* _Encapsulate_ takes as input a public key and produces as output a
ciphertext and a shared secret;
* _Decapsulate_ takes as input a ciphertext and a private key and
produces a shared secret.
Like DH, a KEM can be used as an unauthenticated key-agreement
protocol, for example in TLS [HYBRID] [XYBERTLS]. However, unlike
DH, a KEM-based key agreement is _interactive_, because the party
executing Encapsulate can compute its protocol message (the
ciphertext) only after having received the input (public key) from
the party running _KeyGen_ and _Decapsulate_.
A KEM can be transformed into a PKE scheme using HPKE [RFC9180]
[XYBERHPKE].
1.1. Warning on stability and relation to ML-KEM
*NOTE* This draft is not stable and does not (yet) match the final
NIST standard ML-KEM (FIPS 203) expected in 2024. It also does not
match the draft for ML-KEM published by NIST August 2023. [MLKEM]
Currently it matches Kyber as submitted to round 3 of the NIST PQC
process [KYBERV302].
Schwabe & Westerbaan Expires 27 March 2024 [Page 3]
Internet-Draft kyber September 2023
2. Conventions and Definitions
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
3. Overview
Kyber is an IND-CCA2 secure KEM. It is constructed by applying a
Fujisaki-Okamato style transformation on InnerPKE, which is the
underlying IND-CPA secure Public Key Encryption scheme. We cannot
use InnerPKE directly, as its ciphertexts are malleable.
F.O. transform
InnerPKE ----------------------> Kyber
IND-CPA IND-CCA2
Kyber is a lattice-based scheme. More precisely, its security is
based on the learning-with-errors-and-rounding problem in module
lattices (MLWER). The underlying polynomial ring R (defined in
Section 5) is chosen such that multiplication is very fast using the
number theoretic transform (NTT, see Section 5.1.3.1).
An InnerPKE private key is a vector _s_ over R of length k which is
_small_ in a particular way. Here k is a security parameter akin to
the size of a prime modulus. For Kyber512, which targets AES-128's
security level, the value of k is 2, for Kyber768 (AES-192 security
level) k is 3, and for Kyber1024 (AES-256 security level) k is 4.
The public key consists of two values:
* _A_ a k-by-k matrix over R sampled uniformly at random _and_
* _t = A s + e_, where e is a suitably small masking vector.
Distinguishing between such A s + e and a uniformly sampled t is the
decision module learning-with-errors (MLWE) problem. If that is
hard, then it is also hard to recover the private key from the public
key as that would allow you to distinguish between those two.
To save space in the public key, A is recomputed deterministically
from a 256bit seed _rho_. Strictly speaking, A is not uniformly
random anymore, but it's computationally indistuinguishable from it.
A ciphertext for a message m under this public key is a pair (c_1,
c_2) computed roughly as follows:
Schwabe & Westerbaan Expires 27 March 2024 [Page 4]
Internet-Draft kyber September 2023
c_1 = Compress(A^T r + e_1, d_u)
c_2 = Compress(t^T r + e_2 + Decompress(m, 1), d_v)
where
* e_1, e_2 and r are small blinds;
* Compress(-, d) removes some information, leaving d bits per
coefficient and Decompress is an "approximate inverse" of
Compress;
* d_u, d_v are scheme parameters; and
* superscript T denotes transposition, so _A^T_ is the transpose of
A, see Section 8.3 and _t^T r_ is the dot product of t and r, see
Section 8.2.
Distinguishing such a ciphertext and uniformly sampled (c_1, c_2) is
an example of the full MLWER problem, see Section 4.4 of [KYBERV302].
To decrypt the ciphertext, one computes
m = Compress(Decompress(c_2, d_v) - s^T Decompress(c_1, d_u), 1).
It it not straight-forward to see that this formula is correct. In
fact, there is negligable but non-zero probability that a ciphertext
does not decrypt correctly given by the DFP column in Table 4. This
failure probability can be computed by a careful automated analysis
of the probabilities involved, see kyber_failure.py of [SECEST].
To define all these operations precisely, we first define the field
of coefficients for our polynomial ring; what it means to be small;
and how to compress. Then we define the polynomial ring R; its
operations and in particular the NTT. We continue with the different
methods of sampling and (de)serialization. Then, we first define
InnerPKE and finally Kyber proper.
4. The field GF(q)
Kyber is defined over GF(q) = Z/qZ, the integers modulo q = 13*2^8+1
= 3329.
4.1. Size
To define the size of a field element, we need a signed modulo. For
any odd m, we write
a smod m
Schwabe & Westerbaan Expires 27 March 2024 [Page 5]
Internet-Draft kyber September 2023
for the unique integer b with -(m-1)/2 < b <= (m-1)/2 and b = a
modulo m.
To avoid confusion, for the more familiar modulo we write umod; that
is
a umod m
is the unique integer b with 0 <= b < m and b = a modulo m.
Now we can define the norm of a field element:
|| a || = abs(a smod q)
Examples:
3325 smod q = -4 || 3325 || = 4
-3320 smod q = 9 || -3320 || = 9
// TODO (#23) Should we define smod and umod at all, since we don't
// use it.
//
// -- Bas
4.2. Compression
In several parts of the algorithm, we will need a method to compress
fied elements down into d bits. To do this, we use the following
method.
For any positive integer d, integer x and integer 0 <= y < 2^d, we
define
Compress(x, d) = Round( (2^d / q) x ) umod 2^d
Decompress(y, d) = Round( (q / 2^d) y )
where Round(x) rounds any fraction to the nearest integer going up
with ties.
Note that in Section 8.1 we extend Compress and Decompress to
polynomials and vectors of polynomials.
These two operations have the following properties:
* 0 <= Compress(x, d) < 2^d
* 0 <= Decompress(y, d) < q
Schwabe & Westerbaan Expires 27 March 2024 [Page 6]
Internet-Draft kyber September 2023
* Compress(Decompress(y, d), d) = y
* If Decompress(Compress(x, d), d) = x', then || x' - x || <=
Round(q/2^(d+1))
* If x = x' modulo q, then Compress(x, d) = Compress(x', d)
For implementation efficiency, these can be computed as follows.
Compress(x, d) = Div( (x << d) + q/2), q ) & ((1 << d) - 1)
Decompress(y, d) = (q*y + (1 << (d-1))) >> d
where Div(x, a) = Floor(x / a).
// TODO Do we want to include the proof that this is correct? Do we
// need to define >> and < GF(q)[x]/(x^2-zeta) x ... x GF(q)[x]/(x^2+zeta^127)
given by a |-> ( a mod x^2 - zeta, ..., a mod x^2 + zeta^127 ) is an
isomorphism. This is the Number Theoretic Transform (NTT).
Multiplication on the right is much easier: it's almost
componentwise, see Section 5.1.3.3.
A propos, the the constant factors that appear in the moduli in order
can be computed efficiently as follows (all modulo q):
-zeta = -zeta^brv(64) = -zeta^{1 + 2 brv(0)}
zeta = zeta^brv(64) = -zeta^{1 + 2 brv(1)}
-zeta^65 = -zeta^brv(65) = -zeta^{1 + 2 brv(2)}
zeta^65 = zeta^brv(65) = -zeta^{1 + 2 brv(3)}
-zeta^33 = -zeta^brv(66) = -zeta^{1 + 2 brv(4)}
zeta^33 = zeta^brv(66) = -zeta^{1 + 2 brv(5)}
...
-zeta^127 = -zeta^brv(127) = -zeta^{1 + 2 brv(126)}
zeta^127 = zeta^brv(127) = -zeta^{1 + 2 brv(127)}
To compute a multiplication in R efficiently, one can first use the
NTT, to go to the right "into the NTT domain"; compute the
multiplication there and move back with the inverse NTT.
The NTT can be computed efficiently by performing each binary split
of the polynomial separately as follows:
a |-> ( a mod x^128 - zeta^64, a mod x^128 + zeta^64 ),
|-> ( a mod x^64 - zeta^32, a mod x^64 + zeta^32,
a mod x^64 - zeta^96, a mod x^64 + zeta^96 ),
et cetera
Schwabe & Westerbaan Expires 27 March 2024 [Page 9]
Internet-Draft kyber September 2023
If we concatenate the resulting coefficients, expanding the
definitions, for the first step we get:
a |-> ( a_0 + zeta^64 a_128, a_1 + zeta^64 a_129,
...
a_126 + zeta^64 a_254, a_127 + zeta^64 a_255,
a_0 - zeta^64 a_128, a_1 - zeta^64 a_129,
...
a_126 - zeta^64 a_254, a_127 - zeta^64 a_255)
We can see this as 128 applications of the linear map CT_64, where
CT_i: (a, b) |-> (a + zeta^i b, a - zeta^i b) modulo q
for the appropriate i in the following order, pictured in the case of
n=16:
-x----------------x--------x---
-|-x--------------|-x------|-x-
-|-|-x------------|-|-x----x-|-
-|-|-|-x----------|-|-|-x----x-
-|-|-|-|-x--------x-|-|-|--x---
-|-|-|-|-|-x--------x-|-|--|-x-
-|-|-|-|-|-|-x--------x-|--x-|-
-|-|-|-|-|-|-|-x--------x----x-
-x-|-|-|-|-|-|-|--x--------x---
---x-|-|-|-|-|-|--|-x------|-x-
-----x-|-|-|-|-|--|-|-x----x-|-
-------x-|-|-|-|--|-|-|-x----x-
---------x-|-|-|--x-|-|-|--x---
-----------x-|-|----x-|-|--|-x-
-------------x-|------x-|--x-|-
---------------x--------x----x-
For n=16 there are 3 levels with 1, 2 and 4 row groups respectively.
For the full n=256, there are 7 levels with 1, 2, 4, 8, 16, 32 and 64
row groups respectively. The appropriate power of zeta in the first
level is brv(1)=64. The second level has brv(2) and brv(3) as powers
of zeta for the top and bottom row group respectively, and so on.
The CT_i is known as a Cooley-Tukey butterfly. Its inverse is given
by the Gentleman-Sande butterfly:
GS_i: (a, b) |-> ( (a+b)/2, zeta^-i (a-b)/2 ) modulo q
The inverse NTT can be computed by replacing CS_i by GS_i and
flipping the diagram horizontally.
// TODO (#8) This section gives background not necessary for the
Schwabe & Westerbaan Expires 27 March 2024 [Page 10]
Internet-Draft kyber September 2023
// implementation. Should we keep it?
//
// -- Bas
5.1.3.1.1. Optimization notes
The modular divisions by two in the InvNTT can be collected into a
single modular division by 128.
zeta^-i can be computed as -zeta^(128-i), which allows one to use the
same precomputed table of powers of zeta for both the NTT and InvNTT.
// TODO Add hints on lazy Montgomery reduction? Including
// https://eprint.iacr.org/2020/1377.pdf
//
// -- Bas
5.1.3.2. NTT and InvNTT
As primitive 256th root of unity we use zeta=17.
As before, brv(i) denotes the 7-bit bitreversal of i, so brv(1)=64
and brv(91)=109.
The NTT is a linear bijection R -> R given by the matrix:
[ zeta^{ (2 brv(i>>1) + 1) (j>>1) } if i=j mod 2
(NTT)_{ij} = [
[ 0 otherwise
Recall that we start counting rows and columns at zero. The NTT can
be computed more efficiently as described in section Section 5.1.3.1.
The inverse of the NTT is called InvNTT. It is given by the matrix:
[ zeta^{ 256 - (2 brv(j>>1) + 1) (i>>1) } if i=j mod 2
128 (InvNTT)_{ij} = [
[ 0 otherwise
Examples:
NTT(1, 1, 0, ..., 0) = (1, 1, ..., 1, 1)
NTT(0, 1, 2, ..., 255) = (2429, 2845, 425, 1865, ..., 2502, 2134, 2717, 2303)
Schwabe & Westerbaan Expires 27 March 2024 [Page 11]
Internet-Draft kyber September 2023
5.1.3.3. Multiplication in NTT domain
For elements a, b in R, we write a o b for multiplication in the NTT
domain. That is: a * b = InvNTT(NTT(a) o NTT(b)). Concretely:
[ a_i b_i + zeta^{2 brv(i >> 1) + 1} a_{i+1} b_{i+1} if i even
(a o b)_i = [
[ a_{i-1} b_i + a_i b_{i-1} otherwise
6. Symmetric cryptographic primitives
Kyber makes use of various symmertic primitives PRF, XOF, KDF, H and
G, where
XOF(seed) = SHAKE-128(seed)
PRF(seed, counter) = SHAKE-256(seed || counter)
KDF(prekey) = SHAKE-256(msg)[:32]
H(msg) = SHA3-256(msg)
G(msg) = (SHA3-512(msg)[:32], SHA3-512(msg)[32:])
Here counter is an octet; seed is 32 octets; prekey is 64 octets; and
the length of msg varies.
On the surface, they look different, but they are all based on the
same flexible Keccak XOF that uses the f1600 permutation, see
[FIPS202]:
XOF(seed) = Keccak[256](seed || 1111, .)
PRF(seed, ctr) = Keccak[512](seed || ctr || 1111, .)
KDF(prekey) = Keccak[512](prekey || 1111, 256)
H(msg) = Keccak[512](msg || 01, 256)
G(msg) = (Keccak[1024](msg || 01, 512)[:32],
Keccak[1024](msg || 01, 512)[32:])
Keccak[c] = Sponge[Keccak-f[1600], pad10*1, 1600-c]
The reason five different primitives are used is to ensure domain
separation, which is crucial for security, cf. [H2CURVE] ยง2.2.5.
Additionally, a smaller sponge capacity is used for performance where
permissable by the security requirements.
7. Sampling of polynomials
7.1. Uniformly
The polynomials in the matrix A are sampled uniformly and
deterministically from an octet stream (XOF) using rejection sampling
as follows.
Schwabe & Westerbaan Expires 27 March 2024 [Page 12]
Internet-Draft kyber September 2023
Three octets b_0, b_1, b_2 are read from the stream at a time. These
are interpreted as two 12-bit unsigned integers d_1, d_2 via
d_1 + d_2 2^12 = b_0 + b_1 2^8 + b_2 2^16
This creates a stream of 12-bit ds. Of these, the elements >= q are
ignored. From the resultant stream, the coefficients of the
polynomial are taken in order. In Python:
def sampleUniform(stream):
cs = []
while True:
b = stream.read(3)
d1 = b[0] + 256*(b[1] % 16)
d2 = (b[1] >> 4) + 16*b[2]
for d in [d1, d2]:
if d >= q: continue
cs.append(d)
if len(cs) == n: return Poly(cs)
Example:
sampleUniform(SHAKE-128('')) = (3199, 697, 2212, 2302, ..., 255, 846, 1)
7.1.1. sampleMatrix
Now, the _k_ by _k_ matrix _A_ over _R_ is derived deterministically
from a 32-octet seed _rho_ using sampleUniform as follows.
sampleMatrix(rho)_{ij} = sampleUniform(XOF(rho || octet(j) || octet(i))
That is, to derive the polynomial at the _i_th row and _j_th column,
sampleUniform is called with the 34-octet seed created by first
appending the octet _j_ and then the octet _i_ to _rho_. Recall that
we start counting rows and columns from zero.
As the NTT is a bijection, it does not matter whether we interpret
the polynomials of the sampled matrix in the NTT domain or not. For
efficiency, we do interpret the sampled matrix in the NTT domain.
7.2. From a binomial distribution
Noise is sampled from a centered binomial distribution Binomial(2eta,
1/2) - eta deterministically as follows.
An octet array a of length 64*eta is converted to a polynomial CBD(a,
eta)
Schwabe & Westerbaan Expires 27 March 2024 [Page 13]
Internet-Draft kyber September 2023
CBD(a, eta)_i = b_{2i eta} + b_{2i eta + 1} + ... + b_{2i eta + eta-1}
- b_{2i eta + eta} - ... - b_{2i eta + 2eta - 1},
where b = OctetsToBits(a).
Examples:
CBD((0, 1, 2, ..., 127), 2) = (0, 0, 1, 0, 1, 0, ..., 3328, 1, 0, 1)
CBD((0, 1, 2, ..., 191), 3) = (0, 1, 3328, 0, 2, ..., 3328, 3327, 3328, 1)
7.2.1. sampleNoise
A _k_ component small vector _v_ is derived from a seed 32-octet seed
_sigma_, an offset _offset_ and size _eta_ as follows:
sampleNoise(sigma, eta, offset)_i = CBD(PRF(sigma, octet(i+offset)), eta)
Recall that we start counting vector indices at zero.
8. Vector and matrices
8.1. Operations on vectors
Recall that Compress(x, d) maps a field element x into {0, ...,
2^d-1}. In Kyber d is at most 11 and so we can interpret Compress(x,
d) as a field element again.
In this way, we can extend Compress(-, d) to polynomials by applying
to each coefficient separately and in turn to vectors by applying to
each polynomial. That is, for a vector v and polynomial p:
Compress(p, d)_i = Compress(p_i, d)
Compress(v, d)_i = Compress(v_i, d)
8.2. Dot product and matrix multiplication
We will also use "o", from section Section 5.1.3.3, to denote the dot
product and matrix multiplication in the NTT domain. Concretely:
1. For two length k vector v and w, we write
v o w = v_0 o w_0 + ... + v_{k-1} o w_{k-1}
2. For a k by k matrix A and a length k vector v, we have
(A o v)_i = A_i o v,
Schwabe & Westerbaan Expires 27 March 2024 [Page 14]
Internet-Draft kyber September 2023
where A_i denotes the (i+1)th row of the matrix A as we start
counting at zero.
8.3. Transpose
For a matrix A, we denote by A^T the tranposed matrix. To wit:
A^T_ij = A_ji.
We define Decompress(-, d) for vectors and polynomials in the same
way.
9. Serialization
9.1. OctetsToBits
For any list of octets a_0, ..., a_{s-1}, we define OctetsToBits(a),
which is a list of bits of length 8s, defined by
OctetsToBits(a)_i = ((a_(i>>3)) >> (i umod 8)) umod 2.
Example:
OctetsToBits(12,45) = (0, 0, 1, 1, 0, 0, 0, 0, 1, 0, 1, 1, 0, 1, 0, 0)
9.2. Encode and Decode
For an integer 0 < w <= 12, we define Decode(a, w), which converts
any list a of w*l/8 octets into a list of length l with values in {0,
..., 2^w-1} as follows.
Decode(a, w)_i = b_{wi} + b_{wi+1} 2 + b_{wi+2} 2^2 + ... + b_{wi+w-1} 2^{w-1},
where b = OctetsToBits(a).
Encode(-, w) is the unique inverse of Decode(-, w)
9.2.1. Polynomials
A polynomial p is encoded by passing its coefficients to Encode:
EncodePoly(p, w) = Encode(p_0, p_1, ..., p_{n-1}, w)
DecodePoly(-, w) is the unique inverse of EncodePoly(-, w).
Schwabe & Westerbaan Expires 27 March 2024 [Page 15]
Internet-Draft kyber September 2023
9.2.2. Vectors
A vector v of length k over R is encoded by concatenating the
coefficients in the obvious way:
EncodeVec(v, w) = Encode((v_0)_0, ..., (v_0)_{n-1},
(v_1)_{0}, ..., (v_1)_{n-1},
..., (v_{k-1})_{n-1}, w)
DecodeVec(-, w) is the unique inverse of EncodeVec(-, w).
10. Inner malleable public-key encryption scheme
We are ready to define the IND-CPA secure Public-Key Encryption
scheme that underlies Kyber. It is unsafe to use this underlying
scheme directly as its ciphertexts are malleable. Instead, a Public-
Key Encryption scheme can be constructed on top of Kyber by using
HPKE [RFC9180] [XYBERHPKE].
10.1. Parameters
We have already been introduced to the following parameters:
_q_ Order of field underlying _R_.
_n_ Length of polynomials in _R_.
_zeta_ Primitive root of unity in GF(q), used for NTT in R.
_XOF_, _H_, _G_, _PRF_, _KDF_ Various symmetric primitives.
_k_ Main security parameter: the number of rows and columns in the
matrix _A_.
Additionally, Kyber takes the following parameters
_eta1_, _eta2_ Size of small coefficients used in the private key
and noise vectors.
_d_u_, _d_v_ How many bits to retain per coefficient of the _u_ and
_v_ components of the ciphertext.
The values of these parameters are given in Section 12.
10.2. Key generation
InnerKeyGen(seed) takes a 32 octet *seed* and deterministically
produces a keypair as follows.
Schwabe & Westerbaan Expires 27 March 2024 [Page 16]
Internet-Draft kyber September 2023
1. Set (rho, sigma) = G(seed).
2. Derive
1. AHat = sampleMatrix(rho).
2. s = sampleNoise(sigma, eta1, 0)
3. e = sampleNoise(sigma, eta1, k)
3. Compute
1. sHat = NTT(s)
2. tHat = AHat o sHat + NTT(e)
4. Return
1. publicKey = EncodeVec(tHat, 12) || rho
2. privateKey = EncodeVec(sHat, 12)
Note that in essence we're simply computing t = A s + e.
10.3. Encryption
InnerEnc(msg, publicKey, seed) takes a 32-octet seed, and
deterministically encrypts the 32-octet msg for the InnerPKE public
key publicKey as follows.
1. Split publicKey into
1. k*(n/8)*12-octet tHatPacked
2. 32-octet rho
2. Parse tHat = DecodeVec(tHatPacked, 12)
3. Derive
1. AHat = sampleMatrix(rho)
2. r = sampleNoise(seed, eta1, 0)
3. e_1 = sampleNoise(seed, eta2, k)
4. e_2 = sampleNoise(seed, eta2, 2k)_0
Schwabe & Westerbaan Expires 27 March 2024 [Page 17]
Internet-Draft kyber September 2023
4. Compute
1. rHat = NTT(r)
2. u = InvNTT(AHat^T o rHat) + e_1
3. v = InvNTT(tHat o rHat) + e_2 + Decompress(DecodePoly(msg,
1), 1)
4. c_1 = EncodeVec(Compress(u, d_u), d_u)
5. c_2 = EncodePoly(Compress(v, d_v), d_v)
5. Return
1. cipherText = c_1 || c_2
10.4. Decryption
InnerDec(cipherText, privateKey) takes an InnerPKE private key
privateKey and decrypts a cipher text cipherText as follows.
1. Split cipherText into
1. d_u*k*n/8-octet c_1
2. d_v*n/8-octet c_2
2. Parse
1. u = Decompress(DecodeVec(c_1, d_u), d_u)
2. v = Decompress(DecodePoly(c_2, d_v), d_v)
3. sHat = DecodeVec(privateKey, 12)
3. Compute
1. m = v - InvNTT(sHat o NTT(u))
4. Return
1. plainText = EncodePoly(Compress(m, 1), 1)
11. Kyber
Now we are ready to define Kyber itself.
Schwabe & Westerbaan Expires 27 March 2024 [Page 18]
Internet-Draft kyber September 2023
11.1. Key generation
A Kyber keypair is derived deterministically from a 64-octet seed as
follows.
1. Split seed into
1. A 32-octet cpaSeed
2. A 32-octet z
2. Compute
1. (cpaPublicKey, cpaPrivateKey) = InnerKeyGen(cpaSeed)
2. h = H(cpaPublicKey)
3. Return
1. publicKey = cpaPublicKey
2. privateKey = cpaPrivateKey || cpaPublicKey || h || z
11.2. Encapsulation
Kyber encapsulation takes a public key and generates a shared secret
and ciphertext for the public key as follows.
1. Sample secret cryptographically-secure random 32-octet seed.
2. Compute
1. m = H(seed)
2. (Kbar, cpaSeed) = G(m || H(publicKey))
3. cpaCipherText = InnerEnc(m, publicKey, cpaSeed)
3. Return
1. cipherText = cpaCipherText
2. sharedSecret = KDF(KBar || H(cpaCipherText))
11.3. Decapsulation
Kyber decapsulation takes a private key and a cipher text and returns
a shared secret as follows.
Schwabe & Westerbaan Expires 27 March 2024 [Page 19]
Internet-Draft kyber September 2023
1. Split privateKey into
1. A 12*k*n/8-octet cpaPrivateKey
2. A 12*k*n/8+32-octet cpaPublicKey
3. A 32-octet h
4. A 32-octet z
2. Compute
1. m2 = InnerDec(cipherText, cpaPrivateKey)
2. (KBar2, cpaSeed2) = G(m2 || h)
3. cipherText2 = InnerEnc(m2, cpaPublicKey, cpaSeed2)
4. K1 = KDF(KBar2 || H(cipherText))
5. K2 = KDF(z || H(cipherText))
3. In constant-time, set K = K1 if cipherText == cipherText2 else
set K = K2.
4. Return
1. sharedSecret = K
For security, the implementation MUST NOT explicitly return or
otherwise leak via a side-channel, decapsulation succeeded, viz
cipherText == cipherText2.
12. Parameter sets
+======+=======+=================================+
| Name | Value | Description |
+======+=======+=================================+
| q | 3329 | Order of base field |
+------+-------+---------------------------------+
| n | 256 | Degree of polynomials |
+------+-------+---------------------------------+
| zeta | 17 | nth root of unity in base field |
+------+-------+---------------------------------+
Table 1: Common parameters to all versions of
Kyber
Schwabe & Westerbaan Expires 27 March 2024 [Page 20]
Internet-Draft kyber September 2023
+===========+===================+
| Primitive | Instantiation |
+===========+===================+
| XOF | SHAKE-128 |
+-----------+-------------------+
| H | SHA3-256 |
+-----------+-------------------+
| G | SHA3-512 |
+-----------+-------------------+
| PRF(s,b) | SHAKE-256(s || b) |
+-----------+-------------------+
| KDF | SHAKE-256 |
+-----------+-------------------+
Table 2: Instantiation of
symmetric primitives in Kyber
+============+===================================================+
| Name | Description |
+============+===================================================+
| k | Dimension of module |
+------------+---------------------------------------------------+
| eta1, eta2 | Size of "small" coefficients used in the private |
| | key and noise vectors. |
+------------+---------------------------------------------------+
| d_u | How many bits to retain per coefficient of u, the |
| | private-key independent part of the ciphertext |
+------------+---------------------------------------------------+
| d_v | How many bits to retain per coefficient of v, the |
| | private-key dependent part of the ciphertext. |
+------------+---------------------------------------------------+
Table 3: Description of kyber parameters
+===============+===+======+======+=====+=====+=====+========+
| Parameter set | k | eta1 | eta2 | d_u | d_v | sec | DFP |
+===============+===+======+======+=====+=====+=====+========+
| Kyber512 | 2 | 3 | 2 | 10 | 4 | I | 2^-139 |
+---------------+---+------+------+-----+-----+-----+--------+
| Kyber768 | 3 | 2 | 2 | 10 | 4 | III | 2^-164 |
+---------------+---+------+------+-----+-----+-----+--------+
| Kyber1024 | 4 | 2 | 2 | 11 | 5 | V | 2^-174 |
+---------------+---+------+------+-----+-----+-----+--------+
Table 4: Kyber parameter sets with NIST security level
(sec) and decryption failure probability (DFP)
Schwabe & Westerbaan Expires 27 March 2024 [Page 21]
Internet-Draft kyber September 2023
+===============+====+======+======+======+
| Parameter set | ss | pk | ct | sk |
+===============+====+======+======+======+
| Kyber512 | 32 | 800 | 768 | 1632 |
+---------------+----+------+------+------+
| Kyber768 | 32 | 1184 | 1088 | 2400 |
+---------------+----+------+------+------+
| Kyber1024 | 32 | 1568 | 1568 | 3168 |
+---------------+----+------+------+------+
Table 5: Kyber parameter sets with
sizes of shared secret (ss), public key
(pk), cipher text (ct) and private key
(sk)
13. Machine-readable specification
# WARNING This is a specification of Kyber; not a production ready
# implementation. It is slow and does not run in constant time.
# Requires the CryptoDome for SHAKE. To install, run
#
# pip install pycryptodome pytest
from Crypto.Hash import SHAKE128, SHAKE256
import io
import hashlib
import functools
import collections
from math import floor
q = 3329
nBits = 8
zeta = 17
eta2 = 2
n = 2**nBits
inv2 = (q+1)//2 # inverse of 2
params = collections.namedtuple('params', ('k', 'du', 'dv', 'eta1'))
params512 = params(k = 2, du = 10, dv = 4, eta1 = 3)
params768 = params(k = 3, du = 10, dv = 4, eta1 = 2)
params1024 = params(k = 4, du = 11, dv = 5, eta1 = 2)
def smod(x):
r = x % q
Schwabe & Westerbaan Expires 27 March 2024 [Page 22]
Internet-Draft kyber September 2023
if r > (q-1)//2:
r -= q
return r
# Rounds to nearest integer with ties going up
def Round(x):
return int(floor(x + 0.5))
def Compress(x, d):
return Round((2**d / q) * x) % (2**d)
def Decompress(y, d):
assert 0 <= y and y <= 2**d
return Round((q / 2**d) * y)
def BitsToWords(bs, w):
assert len(bs) % w == 0
return [sum(bs[i+j] * 2**j for j in range(w))
for i in range(0, len(bs), w)]
def WordsToBits(bs, w):
return sum([[(b >> i) % 2 for i in range(w)] for b in bs], [])
def Encode(a, w):
return bytes(BitsToWords(WordsToBits(a, w), 8))
def Decode(a, w):
return BitsToWords(WordsToBits(a, 8), w)
def brv(x):
""" Reverses a 7-bit number """
return int(''.join(reversed(bin(x)[2:].zfill(nBits-1))), 2)
class Poly:
def __init__(self, cs=None):
self.cs = (0,)*n if cs is None else tuple(cs)
assert len(self.cs) == n
def __add__(self, other):
return Poly((a+b) % q for a,b in zip(self.cs, other.cs))
def __neg__(self):
return Poly(q-a for a in self.cs)
def __sub__(self, other):
return self + -other
def __str__(self):
return f"Poly({self.cs}"
Schwabe & Westerbaan Expires 27 March 2024 [Page 23]
Internet-Draft kyber September 2023
def __eq__(self, other):
return self.cs == other.cs
def NTT(self):
cs = list(self.cs)
layer = n // 2
zi = 0
while layer >= 2:
for offset in range(0, n-layer, 2*layer):
zi += 1
z = pow(zeta, brv(zi), q)
for j in range(offset, offset+layer):
t = (z * cs[j + layer]) % q
cs[j + layer] = (cs[j] - t) % q
cs[j] = (cs[j] + t) % q
layer //= 2
return Poly(cs)
def RefNTT(self):
# Slower, but simpler, version of the NTT.
cs = [0]*n
for i in range(0, n, 2):
for j in range(n // 2):
z = pow(zeta, (2*brv(i//2)+1)*j, q)
cs[i] = (cs[i] + self.cs[2*j] * z) % q
cs[i+1] = (cs[i+1] + self.cs[2*j+1] * z) % q
return Poly(cs)
def InvNTT(self):
cs = list(self.cs)
layer = 2
zi = n//2
while layer < n:
for offset in range(0, n-layer, 2*layer):
zi -= 1
z = pow(zeta, brv(zi), q)
for j in range(offset, offset+layer):
t = (cs[j+layer] - cs[j]) % q
cs[j] = (inv2*(cs[j] + cs[j+layer])) % q
cs[j+layer] = (inv2 * z * t) % q
layer *= 2
return Poly(cs)
def MulNTT(self, other):
""" Computes self o other, the multiplication of self and other
in the NTT domain. """
Schwabe & Westerbaan Expires 27 March 2024 [Page 24]
Internet-Draft kyber September 2023
cs = [None]*n
for i in range(0, n, 2):
a1 = self.cs[i]
a2 = self.cs[i+1]
b1 = other.cs[i]
b2 = other.cs[i+1]
z = pow(zeta, 2*brv(i//2)+1, q)
cs[i] = (a1 * b1 + z * a2 * b2) % q
cs[i+1] = (a2 * b1 + a1 * b2) % q
return Poly(cs)
def Compress(self, d):
return Poly(Compress(c, d) for c in self.cs)
def Decompress(self, d):
return Poly(Decompress(c, d) for c in self.cs)
def Encode(self, d):
return Encode(self.cs, d)
def sampleUniform(stream):
cs = []
while True:
b = stream.read(3)
d1 = b[0] + 256*(b[1] % 16)
d2 = (b[1] >> 4) + 16*b[2]
assert d1 + 2**12 * d2 == b[0] + 2**8 * b[1] + 2**16*b[2]
for d in [d1, d2]:
if d >= q:
continue
cs.append(d)
if len(cs) == n:
return Poly(cs)
def CBD(a, eta):
assert len(a) == 64*eta
b = WordsToBits(a, 8)
cs = []
for i in range(n):
cs.append((sum(b[:eta]) - sum(b[eta:2*eta])) % q)
b = b[2*eta:]
return Poly(cs)
def XOF(seed, j, i):
h = SHAKE128.new()
h.update(seed + bytes([j, i]))
return h
Schwabe & Westerbaan Expires 27 March 2024 [Page 25]
Internet-Draft kyber September 2023
def PRF(seed, nonce):
assert len(seed) == 32
h = SHAKE256.new()
h.update(seed + bytes([nonce]))
return h
def G(seed):
h = hashlib.sha3_512(seed).digest()
return h[:32], h[32:]
def H(msg): return hashlib.sha3_256(msg).digest()
def KDF(msg): return hashlib.shake_256(msg).digest(length=32)
class Vec:
def __init__(self, ps):
self.ps = tuple(ps)
def NTT(self):
return Vec(p.NTT() for p in self.ps)
def InvNTT(self):
return Vec(p.InvNTT() for p in self.ps)
def DotNTT(self, other):
""" Computes the dot product in NTT domain. """
return sum((a.MulNTT(b) for a, b in zip(self.ps, other.ps)),
Poly())
def __add__(self, other):
return Vec(a+b for a,b in zip(self.ps, other.ps))
def Compress(self, d):
return Vec(p.Compress(d) for p in self.ps)
def Decompress(self, d):
return Vec(p.Decompress(d) for p in self.ps)
def Encode(self, d):
return Encode(sum((p.cs for p in self.ps), ()), d)
def __eq__(self, other):
return self.ps == other.ps
def EncodeVec(vec, w):
return Encode(sum([p.cs for p in vec.ps], ()), w)
def DecodeVec(bs, k, w):
cs = Decode(bs, w)
return Vec(Poly(cs[n*i:n*(i+1)]) for i in range(k))
Schwabe & Westerbaan Expires 27 March 2024 [Page 26]
Internet-Draft kyber September 2023
def DecodePoly(bs, w):
return Poly(Decode(bs, w))
class Matrix:
def __init__(self, cs):
""" Samples the matrix uniformly from seed rho """
self.cs = tuple(tuple(row) for row in cs)
def MulNTT(self, vec):
""" Computes matrix multiplication A*vec in the NTT domain. """
return Vec(Vec(row).DotNTT(vec) for row in self.cs)
def T(self):
""" Returns transpose of matrix """
k = len(self.cs)
return Matrix((self.cs[j][i] for j in range(k))
for i in range(k))
def sampleMatrix(rho, k):
return Matrix([[sampleUniform(XOF(rho, j, i))
for j in range(k)] for i in range(k)])
def sampleNoise(sigma, eta, offset, k):
return Vec(CBD(PRF(sigma, i+offset).read(64*eta), eta)
for i in range(k))
def constantTimeSelectOnEquality(a, b, ifEq, ifNeq):
# WARNING! In production code this must be done in a
# data-independent constant-time manner, which this implementation
# is not. In fact, many more lines of code in this
# file are not constant-time.
return ifEq if a == b else ifNeq
def InnerKeyGen(seed, params):
assert len(seed) == 32
rho, sigma = G(seed)
A = sampleMatrix(rho, params.k)
s = sampleNoise(sigma, params.eta1, 0, params.k)
e = sampleNoise(sigma, params.eta1, params.k, params.k)
sHat = s.NTT()
eHat = e.NTT()
tHat = A.MulNTT(sHat) + eHat
pk = EncodeVec(tHat, 12) + rho
sk = EncodeVec(sHat, 12)
return (pk, sk)
def InnerEnc(pk, msg, seed, params):
assert len(msg) == 32
Schwabe & Westerbaan Expires 27 March 2024 [Page 27]
Internet-Draft kyber September 2023
tHat = DecodeVec(pk[:-32], params.k, 12)
rho = pk[-32:]
A = sampleMatrix(rho, params.k)
r = sampleNoise(seed, params.eta1, 0, params.k)
e1 = sampleNoise(seed, eta2, params.k, params.k)
e2 = sampleNoise(seed, eta2, 2*params.k, 1).ps[0]
rHat = r.NTT()
u = A.T().MulNTT(rHat).InvNTT() + e1
m = Poly(Decode(msg, 1)).Decompress(1)
v = tHat.DotNTT(rHat).InvNTT() + e2 + m
c1 = u.Compress(params.du).Encode(params.du)
c2 = v.Compress(params.dv).Encode(params.dv)
return c1 + c2
def InnerDec(sk, ct, params):
split = params.du * params.k * n // 8
c1, c2 = ct[:split], ct[split:]
u = DecodeVec(c1, params.k, params.du).Decompress(params.du)
v = DecodePoly(c2, params.dv).Decompress(params.dv)
sHat = DecodeVec(sk, params.k, 12)
return (v - sHat.DotNTT(u.NTT()).InvNTT()).Compress(1).Encode(1)
def KeyGen(seed, params):
assert len(seed) == 64
z = seed[32:]
pk, sk2 = InnerKeyGen(seed[:32], params)
h = H(pk)
return (pk, sk2 + pk + h + z)
def Enc(pk, seed, params):
assert len(seed) == 32
m = H(seed)
Kbar, r = G(m + H(pk))
ct = InnerEnc(pk, m, r, params)
K = KDF(Kbar + H(ct))
return (ct, K)
def Dec(sk, ct, params):
sk2 = sk[:12 * params.k * n//8]
pk = sk[12 * params.k * n//8 : 24 * params.k * n//8 + 32]
h = sk[24 * params.k * n//8 + 32 : 24 * params.k * n//8 + 64]
z = sk[24 * params.k * n//8 + 64 : 24 * params.k * n//8 + 96]
m2 = InnerDec(sk, ct, params)
Kbar2, r2 = G(m2 + h)
ct2 = InnerEnc(pk, m2, r2, params)
return constantTimeSelectOnEquality(
ct2, ct,
Schwabe & Westerbaan Expires 27 March 2024 [Page 28]
Internet-Draft kyber September 2023
KDF(Kbar2 + H(ct)), # if ct == ct2
KDF(z + H(ct)), # if ct != ct2
)
14. Security Considerations
Kyber512, Kyber768 and Kyber1024 are designed to be post-quantum IND-
CCA2 secure KEMs, at the security levels of AES-128, AES-192 and AES-
256.
The designers of Kyber recommend Kyber768.
The inner public key encryption SHOULD NOT be used directly, as its
ciphertexts are malleable. Instead, for public key encryption, HPKE
can be used to turn Kyber into IND-CCA2 secure PKE [RFC9180]
[XYBERHPKE].
Any implementation MUST use implicit rejection as specified in
Section 11.3.
15. References
15.1. Normative References
[FIPS202] National Institute of Standards and Technology, "FIPS PUB
202: SHA-3 Standard: Permutation-Based Hash and
Extendable-Output Functions", n.d.,
.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, .
15.2. Informative References
[H2CURVE] Faz-Hernandez, A., Scott, S., Sullivan, N., Wahby, R. S.,
and C. A. Wood, "Hashing to Elliptic Curves", Work in
Progress, Internet-Draft, draft-irtf-cfrg-hash-to-curve-
16, 15 June 2022, .
Schwabe & Westerbaan Expires 27 March 2024 [Page 29]
Internet-Draft kyber September 2023
[HYBRID] Stebila, D., Fluhrer, S., and S. Gueron, "Hybrid key
exchange in TLS 1.3", Work in Progress, Internet-Draft,
draft-stebila-tls-hybrid-design-03, 12 February 2020,
.
[KYBERV302]
Avanzi, R., Bos, J., Ducas, L., Kiltz, E., Lepoint, T.,
Lyubashevsky, V., Schanck, J., Schwabe, P., Seiler, G.,
and D. Stehle, "CRYSTALS-Kyber, Algorithm Specification
And Supporting Documentation (version 3.02)", 2021,
.
[MLKEM] National Institute of Standards and Technology, "FIPS 203
(Initial Draft): Module-Lattice-Based Key-Encapsulation
Mechanism Standard", n.d.,
.
[NISTR3] The NIST PQC Team, "PQC Standardization Process:
Announcing Four Candidates to be Standardized, Plus Fourth
Round Candidates", n.d., .
[RFC9180] Barnes, R., Bhargavan, K., Lipp, B., and C. Wood, "Hybrid
Public Key Encryption", RFC 9180, DOI 10.17487/RFC9180,
February 2022, .
[SECEST] Ducas, L. and J. Schanck, "CRYSTALS security estimate
scripts", n.d.,
.
[XYBERHPKE]
Westerbaan, B. and C. A. Wood, "X25519Kyber768Draft00
hybrid post-quantum KEM for HPKE", Work in Progress,
Internet-Draft, draft-westerbaan-cfrg-hpke-xyber768d00-02,
4 May 2023, .
[XYBERTLS] Westerbaan, B. and D. Stebila, "X25519Kyber768Draft00
hybrid post-quantum key agreement", Work in Progress,
Internet-Draft, draft-tls-westerbaan-xyber768d00-02, 31
March 2023, .
Schwabe & Westerbaan Expires 27 March 2024 [Page 30]
Internet-Draft kyber September 2023
Appendix A. Acknowledgments
The authors would like to thank C. Wood, Florence D., I. Liusvaara,
J. Crawford, J. Schanck, M. Thomson, and N. Sullivan for their
input and assistance.
Appendix B. Change Log
*RFC Editor's Note:* Please remove this section prior to
publication of a final version of this document.
B.1. Since draft-schwabe-cfrg-kyber-02
* Fix a typo in the machine-readable specification, and use a proper
SHAKE implementation. #5
* Add table with sizes.
* Reordered sections.
* Add reference to Kyber in HPKE.
* Miscellaneous editorial changes.
* Remove encapsulation seed as an explicit parameter in the written
specification.
* Write security recommendations. #18
* Explain relation with ML-KEM.
B.2. Since draft-schwabe-cfrg-kyber-01
* Fix various typos.
* Move sections around.
* Elaborate domain separation and encoding of nonces in symmetric
primitives.
* Add explicit formula for InvNTT.
* Add acknowledgements.
B.3. Since draft-schwabe-cfrg-kyber-00
* Test specification against NIST test vectors.
Schwabe & Westerbaan Expires 27 March 2024 [Page 31]
Internet-Draft kyber September 2023
* Fix two unintentional mismatches between this document and the
reference implementation:
1. KDF uses SHAKE-256 instead of SHAKE-128.
2. Reverse order of seed. (z comes at the end.)
* Elaborate text in particular introduction, and symmetric key
section.
Authors' Addresses
Peter Schwabe
MPI-SP & Radboud University
Email: peter@cryptojedi.org
Bas Westerbaan
Cloudflare
Email: bas@cloudflare.com
Schwabe & Westerbaan Expires 27 March 2024 [Page 32]