| Internet-Draft | Content Delivery Network Interconnection | August 2022 |
| Sopher & Mishra | Expires 9 February 2023 | [Page] |
Open Caching architecture is a use case of Content Delivery Networks Interconnection (CDNI) in which the commercial Content Delivery Network (CDN) is the upstream CDN (uCDN) and the ISP caching layer serves as the downstream CDN (dCDN). This document supplements the CDNI Metadata Footprint Types defined in RFC 8006. The Footprint Types defined in this document can be used for Footprint objects as part of the Metadata interface (MI) defined in RFC 8006 or the Footprint & Capabilities Advertisement interface (FCI) defined in RFC 8008. The document also updates RFC 9241 with relevant ALTO entity domain types. The defined Footprint Types are derived from requirements raised by Open Caching but are also applicable to CDNI use cases in general.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 9 February 2023.¶
Copyright (c) 2022 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
The Streaming Video Alliance [SVA] is a global association that works to solve streaming video challenges in an effort to improve end-user experience and adoption. The Open Caching Working Group [OCWG] of the Streaming Video Alliance [SVA] is focused on the delegation of video delivery requests from commercial CDNs to a caching layer at the ISP's network. Open Caching architecture is a specific use case of CDNI where the commercial CDN is the upstream CDN (uCDN) and the ISP caching layer is the downstream CDN (dCDN). The Open Caching Request Routing Specification [OC-RR] defines the Request Routing process and the interfaces that are required for its provisioning. This document defines and registers CDNI Footprint and Capabilities objects [RFC8008] that are required for Open Caching Request Routing.¶
For consistency with other CDNI documents this document follows the CDNI convention of uCDN (upstream CDN) and dCDN (downstream CDN) to represent the commercial CDN and ISP caching layer respectively.¶
This document registers two CDNI Metadata Footprint Types (section 7.2 of [RFC8006]) for the defined objects:¶
Section 5 of [RFC8008] describes the FCI Capability Advertisement Object, which includes an array of CDNI Footprint Objects. Each such object has a footprint-type and a footprint-value, as described in section 4.2.2.2 of [RFC8006]. This document defines additional footprint types, beyond those mentioned in CDNI metadata [RFC8006].¶
Section 4.3.8 of [RFC8006] specifies the "Country Code" footprint type for listing [ISO3166-1] alpha-2 codes. Using Footprint Objects of this type, one can define an FCI Capability Advertisement Object footprint constraint that matches a specific country. Herein is define the subdivisioncode simple data type, as well as a footprint type allowing the dCDN to define constraints matching geographic areas with better granularity, specifically using the [ISO3166-2] Country Subdivision codes.¶
The "SubdivisionCode" data type specified in Section 2.1.1.1, describes a country specific subdivision using an [ISO3166-2] code. The data type is added to the list of data types described in section 4.3 of [RFC8006] that are used as properties of CDNI Metadata objects.¶
An [ISO3166-2] code in lower case. Each code consists of two parts separated by a hyphen. The first part is the [ISO3166-1] code of the country. The second part is a string of up to three alphanumeric characters.¶
The "SubdivisionCode" simple data type specified in Section 2.1.1, is added to the data types listed as footprint types in section 4.2.2.2 of [RFC8006] .¶
Below is an example using a footprint object of type "SubdivisionCode". The Footprint Object in this example creates a constraint matching clients both in the Nova-Scotia province of Canada (ISO [ISO3166-2] code "CA-NS"), as well as in the state of New-York In the US (ISO [ISO3166-2] code "US-NY").¶
{
"capabilities": [
{
"capability-type": <CDNI capability object type>,
"capability-value": <CDNI capability object>,
"footprints": [
{
"footprint-type": "subdivisioncode",
"footprint-value": ["ca-ns", "us-ny"]
}
]
}
]
}
¶
As described in section 5 of [RFC8008], the FCI Capability Advertisement Object includes an array of CDNI Footprint Objects. Appendix B of [RFC8008] specifies the semantics of a Footprint Objects array as a multiple, additive, footprint constraints. This implies that the advertisement of different footprint types narrows the dCDN's candidacy cumulatively.¶
Sections 4.3.5 and 4.3.6 of [RFC8006] specify the "IPv4CIDR" and "IPv6CIDR" footprint types, respectively, for listing IP addresses blocks. Using Footprint Objects of these types, one can define FCI Capability Advertisement Object footprint constraints that match IPv4 or IPv6 clients. However, the described "narrowing" semantic of the Footprint Objects array prevents the usage of these objects together to create a footprint constraint that matches IPv4 clients together with IPv6 clients.¶
Below is an example for an attempt at creating an object matching IPv4 clients of subnet "192.0.2.0/24", as well as IPv6 clients of subnet "2001:db8::/32". Such a definition results in an empty list of clients, as the constraints are additives and a client address cannot be both IPv4 and IPv6.¶
{
"capabilities": [
{
"capability-type": <CDNI capability object type>,
"capability-value": <CDNI capability object>,
"footprints": [
{
"footprint-type": "ipv4cidr",
"footprint-value": ["192.0.2.0/24"]
},
{
"footprint-type": "ipv6cidr",
"footprint-value": ["2001:db8::/32"]
}
]
}
]
}
¶
To overcome the described limitation and allow a list of footprint constraints that match both IPv4 and IPv6 client addresses, below is introduced the "FootprintUnion" footprint type. This footprint type allows the collection of multiple footprint-objects into a unified object. It is useful for resolving the above limitation, as well as for unifying footprints of additional types such as countrycode and subdivisioncode.¶
The "FootprintUnion" data type is based on the Footprint Object already defined in section 4.2.2.2 of [RFC8006]. The footprint-value for a FootprintUnion object is an array of Footprint objects, where the Footprint objects may be of any Footprint Type other than FootprintUnion.¶
The "footprintunion" data type specified in Section 2.2.1, is added to the data types listed as footprint types in section 4.2.2.2 of [RFC8006].¶
Below is an example using a footprint object of type "footprintunion".¶
{
"capabilities": [
{
"capability-type": <CDNI capability object type>,
"capability-value": <CDNI capability object>,
"footprints": [
{
"footprint-type": "footprintunion",
"footprint-value": [
{
"footprint-type": "ipv4cidr",
"footprint-value": ["192.0.2.0/24"]
},
{
"footprint-type": "ipv6cidr",
"footprint-value": ["2001:db8::/32"]
}
]
}
]
}
]
}
¶
The footprint union also enables composing a countrycode and subdivisioncode based footprint objects. In the example below we create a constraint covering autonomous system 64496 within the US (ISO [ISO3166-1] alpha-2 code "US") and the Nova-Scotia province of Canada (ISO [ISO3166-2] code "CA-NS").¶
{
"capabilities": [
{
"capability-type": <CDNI capability object type>,
"capability-value": <CDNI capability object>,
"footprints": [
{
"footprint-type": "asn",
"footprint-value": ["as64496"]
},
{
"footprint-type": "footprintunion",
"footprint-value": [
{
"footprint-type": "countrycode",
"footprint-value": ["us"]
},
{
"footprint-type": "subdivisioncode",
"footprint-value": ["ca-ns"]
}
]
}
]
}
]
}
¶
Section 6 of [RFC9241] describes how to represent footprint objects as entities in the ALTO property map. The approach is to represent the "footprint-type" as an entity domain type of the ALTO entity, and the footprint value as its domain-specific identifier. [RFC9241] further refers to the representation of footprint objects of types "asn" and "countrycode". Here we extend this definition to the "subdivisioncode" footprint-type.¶
The SUBDIVISIONCODE domain associates property values that defines codes for the names of the principal subdivisions.¶
The entity domain type of the SUBDIVISIONCODE domain is "subdivisioncode" (in lowercase).¶
The entity identifier of an entity in a SUBDIVISIONCODE is encoded as an alpha-2 [ISO3166-1] Country Code, followed by a separator and up to three alphanumeric characters.¶
Section 7.2 of [RFC8006] creates the "CDNI Metadata Footprint Types" subregistry within the "Content Delivery Network Interconnection (CDNI) Parameters" registry.¶
This document requests the registration of the two additional Footprint Types as defined in Section 2.2 and Section 2.1 :¶
| Footprint Type | Description | Specification |
|---|---|---|
| FCI.subdivisioncode | [ISO3166-2] Subdivision Code: An alpha-2 [ISO3166-1] Country Code, followed by a separator and up to three alphanumeric characters. | RFCthis |
| FCI.footprintunion | A combination of other Footprint Objects | RFCthis |
[RFC Editor: Please replace RFCthis with the published RFC number for this document.]¶
Section 12.3 of [RFC9240] creates the "ALTO Entity Domain Types" registry.¶
This document requests the registration of an additional ALTO Entity Domain Types:¶
| Identifier | Entity Identifier Encoding | Hierarchy and Inheritance | Media Type of Defining Resource | Mapping to ALTO Address Type |
|---|---|---|---|---|
| subdivisioncode | See RFCthis, Section 3.1.1.1 | None | None | false |
[RFC Editor: Please replace RFCthis with the published RFC number for this document.]¶
This specification is in accordance with the CDNI Metadata and the CDNI Request Routing: Footprint and Capabilities Semantics. As such, it is subject to the security and privacy considerations as defined in Section 8 of [RFC8006] and in Section 7 of [RFC8008] respectively. More specifically, the use of "SubdivisionCode" footprint type, introduces a higher level of granularity into the published dCDN Footprint. Therefore, to meet confidentiality requirements, the use of transport-layer security mechanisms as specified in Section 7 of [RFC8008] is required.¶
The authors would like to express their gratitude to Ori Finkelman and Kevin J. Ma for their guidance and reviews throughout the development of this document.¶