Internet-Draft Retrofit Structured Fields May 2022
Nottingham Expires 25 November 2022 [Page]
Workgroup:
Network Working Group
Internet-Draft:
draft-ietf-httpbis-retrofit-03
Published:
Intended Status:
Standards Track
Expires:
Author:
M. Nottingham

Retrofit Structured Fields for HTTP

Abstract

This specification nominates a selection of existing HTTP fields as having syntax that is compatible with Structured Fields, so that they can be handled as such (subject to certain caveats).

To accommodate some additional fields whose syntax is not compatible, it also defines mappings of their semantics into new Structured Fields. It does not specify how to negotiate their use.

About This Document

This note is to be removed before publishing as an RFC.

Status information for this document may be found at https://datatracker.ietf.org/doc/draft-ietf-httpbis-retrofit/.

Discussion of this document takes place on the HTTP Working Group mailing list (mailto:ietf-http-wg@w3.org), which is archived at https://lists.w3.org/Archives/Public/ietf-http-wg/. Working Group information can be found at https://httpwg.org/.

Source for this draft and an issue tracker can be found at https://github.com/httpwg/http-extensions/labels/retrofit.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 25 November 2022.

Table of Contents

1. Introduction

Structured Field Values for HTTP [STRUCTURED-FIELDS] introduced a data model with associated parsing and serialization algorithms for use by new HTTP field values. Fields that are defined as Structured Fields can realise a number of benefits, including:

However, a field needs to be defined as a Structured Field for these benefits to be realised. Many existing fields are not, making up the bulk of header and trailer fields seen in HTTP traffic on the internet.

This specification defines how a selection of existing HTTP fields can be handled as Structured Fields, so that these benefits can be realised -- thereby making them Retrofit Structured Fields.

It does so using two techniques. Section 2 lists compatible fields -- those that can be handled as if they were Structured Fields due to the similarity of their defined syntax to that in Structured Fields. Section 3 lists mapped fields -- those whose syntax needs to be transformed into an underlying data model which is then mapped into that defined by Structured Fields.

Note that while implementations can parse and serialise compatible fields as Structured Fields subject to the caveats in Section 2, a sender cannot generate mapped fields from Section 3 and expect them to be understood and acted upon by the recipient without prior negotiation. This specification does not define such a mechanism.

1.1. Notational Conventions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

2. Compatible Fields

The HTTP fields listed in Table 1 can usually have their values handled as Structured Fields according to the listed parsing and serialisation algorithms in [STRUCTURED-FIELDS], subject to the listed caveats.

The listed types are chosen for compatibility with the defined syntax of the field as well as with actual internet traffic. However, not all instances of these fields will successfully parse. This might be because the field value is clearly invalid, or it might be because it is valid but not parseable as a Structured Field.

An application using this specification will need to consider how to handle such field values. Depending on its requirements, it might be advisable to reject such values, treat them as opaque strings, or attempt to recover a structured value from them in an ad hoc fashion.

Table 1: Compatible Fields
Field Name Structured Type
Accept List
Accept-Encoding List
Accept-Language List
Accept-Patch List
Accept-Post List
Accept-Ranges List
Access-Control-Allow-Credentials Item
Access-Control-Allow-Headers List
Access-Control-Allow-Methods List
Access-Control-Allow-Origin Item
Access-Control-Expose-Headers List
Access-Control-Max-Age Item
Access-Control-Request-Headers List
Access-Control-Request-Method Item
Age Item
Allow List
ALPN List
Alt-Svc Dictionary
Alt-Used Item
Cache-Control Dictionary
CDN-Loop List
Clear-Site-Data List
Connection List
Content-Encoding List
Content-Language List
Content-Length List
Content-Type Item
Cross-Origin-Resource-Policy Item
Expect Dictionary
Expect-CT Dictionary
Forwarded Dictionary
Host Item
Keep-Alive Dictionary
Max-Forwards Item
Origin Item
Pragma Dictionary
Prefer Dictionary
Preference-Applied Dictionary
Retry-After Item
Sec-WebSocket-Extensions List
Sec-WebSocket-Protocol List
Sec-WebSocket-Version Item
Server-Timing List
Surrogate-Control Dictionary
TE List
Timing-Allow-Origin List
Trailer List
Transfer-Encoding List
Vary List
X-Content-Type-Options Item
X-Frame-Options Item
X-XSS-Protection List

Note the following caveats regarding compatibility:

Parameter and Dictionary keys:

HTTP parameter names are case-insensitive (per Section 5.6.6 of [HTTP]), but Structured Fields require them to be all-lowercase. Although the vast majority of parameters seen in typical traffic are all-lowercase, compatibility can be improved by force-lowercasing parameters when parsing. Likewise, many Dictionary-based fields (e.g., Cache-Control, Expect-CT, Pragma, Prefer, Preference-Applied, Surrogate-Control) have case-insensitive keys, and compatibility can be improved by force-lowercasing them when parsing.

Parameter delimitation:

The parameters rule in HTTP (see Section 5.6.6 of [HTTP]) allows whitespace before the ";" delimiter, but Structured Fields does not. Compatibility can be improved by allowing such whitespace when parsing.

String quoting:

Section 5.6.4 of [HTTP] allows backslash-escaping most characters in quoted strings, whereas Structured Field Strings only escape "\" and DQUOTE. Compatibility can be improved by unescaping other characters before parsing.

Token limitations:

In Structured Fields, tokens are required to begin with an alphabetic character or "*", whereas HTTP tokens allow a wider range of characters. This prevents use of mapped values that begin with one of these characters. For example, media types, field names, methods, range-units, character and transfer codings that begin with a number or special character other than "*" might be valid HTTP protocol elements, but will not be able to be parsed as Structured Field Tokens.

Integer limitations:

Structured Fields Integers can have at most 15 digits; larger values will not be able to be represented in them.

IPv6 Literals:

Fields whose values contain IPv6 literal addresses (such as CDN-Loop, Host, and Origin) are not able to be represented as Structured Fields Tokens, because the brackets used to delimit them are not allowed in Tokens.

Empty Field Values:

Empty and whitespace-only field values are considered errors in Structured Fields. For compatible fields, an empty field indicates that the field should be silently ignored.

Alt-Svc:

Some ALPN tokens (e.g., h3-Q43) do not conform to key's syntax, and therefore cannot be represented as a Token. Since the final version of HTTP/3 uses the h3 token, this shouldn't be a long-term issue, although future tokens may again violate this assumption.

Content-Length:

Note that Content-Length is defined as a List because it is not uncommon for implementations to mistakenly send multiple values. See Section 8.6 of [HTTP] for handling requirements.

Retry-After:

Only the delta-seconds form of Retry-After can be represented; a Retry-After value containing a http-date will need to be converted into delta-seconds to be conveyed as a Structured Field Value.

3. Mapped Fields

Some HTTP field values have syntax that cannot be successfully parsed as Structured Fields. Instead, it is necessary to map them into a separate Structured Field with an alternative name.

For example, the Date HTTP header field carries a date:

Date: Sun, 06 Nov 1994 08:49:37 GMT

Its value is more efficiently represented as an Integer number of delta seconds from the Unix epoch (00:00:00 UTC on 1 January 1970, minus leap seconds). Thus, the example above would be mapped to:

SF-Date: 784072177

As in Section 2, these fields are unable to carry values that are not valid Structured Fields, and so an application using this specification will need to how to support such values. Typically, handling them using the original field name is sufficient.

Each field name listed below indicates a replacement field name and a means of mapping its original value into a Structured Field.

3.1. URLs

The field names in Table 2 (paired with their mapped field names) have values that can be mapped into Structured Fields by treating the original field's value as a String.

Table 2: URL Fields
Field Name Mapped Field Name
Content-Location SF-Content-Location
Location SF-Location
Referer SF-Referer

For example, a Location field could be mapped as:

SF-Location: "https://example.com/foo"

3.2. Dates

The field names in Table 3 (paired with their mapped field names) have values that can be mapped into Structured Fields by parsing their payload according to Section 5.6.7 of [HTTP] and representing the result as an Integer number of seconds delta from the Unix Epoch (00:00:00 UTC on 1 January 1970, minus leap seconds).

Table 3: Date Fields
Field Name Mapped Field Name
Date SF-Date
Expires SF-Expires
If-Modified-Since SF-IMS
If-Unmodified-Since SF-IUS
Last-Modified SF-LM

For example, an Expires field could be mapped as:

SF-Expires: 1571965240

3.3. ETags

The field value of the ETag header field can be mapped into the SF-ETag Structured Field by representing the entity-tag as a String, and the weakness flag as a Boolean "w" parameter on it, where true indicates that the entity-tag is weak; if 0 or unset, the entity-tag is strong.

For example:

SF-ETag: "abcdef"; w=?1

If-None-Match's field value can be mapped into the SF-INM Structured Field, which is a List of the structure described above.

For example:

SF-INM: "abcdef"; w=?1, "ghijkl"

3.5. Cookies

The field values of the Cookie and Set-Cookie fields [COOKIES] can be mapped into the SF-Cookie Structured Field (a List) and SF-Set-Cookie Structured Field (a Dictionary), respectively.

In each case, cookie names are Tokens. Their values are Strings, unless they can be represented accurately and unambiguously using the textual representation of another structured types (e.g., an Integer or Decimal).

Set-Cookie parameters map to Parameters on the appropriate SF-Set-Cookie member, with the parameter name being forced to lowercase. Set-Cookie parameter values are Strings unless a specific type is defined for them. This specification defines the parameter types in Table 4.

Expires is mapped to an Integer representation of parsed-cookie-date (see Part x.x of [COOKIES]) expressed as a number of seconds delta from the Unix Epoch (00:00:00 UTC on 1 January 1970, minus leap seconds).

Note that although this mapping is very similar to the syntax of Cookie and Set-Cookie headers, cookies in both fields are separated by commas, not semicolons, and multiple cookies can appear in each field.

For example:

SF-Set-Cookie: lang="en-US"; expires="Wed, 09 Jun 2021 10:18:14 GMT";
               samesite=Strict; secure=?1
SF-Cookie: SID="31d4d96e407aad42", lang="en-US"

4. IANA Considerations

Please add the following note to the "Hypertext Transfer Protocol (HTTP) Field Name Registry":

Then, add a new column, "Structured Type", with the values from Section 2 assigned to the nominated registrations, prefixing each with "*" to indicate that it is a retrofit type.

Then, add the field names in Table 5, with the corresponding Structured Type as indicated, a status of "permanent" and referring to this document.

Table 5: New Fields
Field Name Structured Type
SF-Content-Location String
SF-Cookie List
SF-Date Item
SF-ETag Item
SF-Expires Item
SF-IMS Item
SF-INM List
SF-IUS Item
SF-Link List
SF-LM Item
SF-Location String
SF-Referer String
SF-Set-Cookie Dictionary

Finally, add the indicated Structured Type for each existing registry entry listed in Table 6.

Table 6: Existing Fields
Field Name Structured Type
Accept-CH List
Cache-Status List
CDN-Cache-Control Dictionary
Cross-Origin-Embedder-Policy Item
Cross-Origin-Embedder-Policy-Report-Only Item
Cross-Origin-Opener-Policy Item
Cross-Origin-Opener-Policy-Report-Only Item
Origin-Agent-Cluster Item
Priority Dictionary
Proxy-Status List

5. Security Considerations

Section 2 identifies existing HTTP fields that can be parsed and serialised with the algorithms defined in [STRUCTURED-FIELDS]. Variances from existing parser behavior might be exploitable, particularly if they allow an attacker to target one implementation in a chain (e.g., an intermediary). However, given the considerable variance in parsers already deployed, convergence towards a single parsing algorithm is likely to have a net security benefit in the longer term.

Section 3 defines alternative representations of existing fields. Because downstream consumers might interpret the message differently based upon whether they recognise the alternative representation, implementations are prohibited from generating such fields unless they have negotiated support for them with their peer. This specification does not define such a mechanism, but any such definition needs to consider the implications of doing so carefully.

6. Normative References

[COOKIES]
Chen, L., Englehardt, S., West, M., and J. Wilander, "Cookies: HTTP State Management Mechanism", Work in Progress, Internet-Draft, draft-ietf-httpbis-rfc6265bis-10, , <https://datatracker.ietf.org/doc/html/draft-ietf-httpbis-rfc6265bis-10>.
[HTTP]
Fielding, R. T., Nottingham, M., and J. Reschke, "HTTP Semantics", Work in Progress, Internet-Draft, draft-ietf-httpbis-semantics-19, , <https://datatracker.ietf.org/doc/html/draft-ietf-httpbis-semantics-19>.
[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/rfc/rfc2119>.
[RFC8174]
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/rfc/rfc8174>.
[RFC8288]
Nottingham, M., "Web Linking", RFC 8288, DOI 10.17487/RFC8288, , <https://www.rfc-editor.org/rfc/rfc8288>.
[STRUCTURED-FIELDS]
Nottingham, M. and P-H. Kamp, "Structured Field Values for HTTP", RFC 8941, DOI 10.17487/RFC8941, , <https://www.rfc-editor.org/rfc/rfc8941>.

Author's Address

Mark Nottingham
Prahran
Australia