TOC 
http-stateA. Barth
Internet-DraftU.C. Berkeley
Expires: July 10, 2010January 06, 2010


HTTP State Management Mechanism
draft-ietf-httpstate-cookie-00

Abstract

This document defines the HTTP Cookie and Set-Cookie headers.

NOTE: If you have suggestions for improving the draft, please send email to http-state@ietf.org. Suggestions with test cases are especially appreciated.

Status of this Memo

This Internet-Draft is submitted to IETF in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”

The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt.

The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html.

This Internet-Draft will expire on July 10, 2010.

Copyright Notice

Copyright (c) 2010 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the BSD License.

This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English.



Table of Contents

1.  Introduction
    1.1.  Syntax Notation
2.  Terminology
3.  Overview
    3.1.  Examples
4.  Protocol Description
    4.1.  Set-Cookie
        4.1.1.  Syntax
        4.1.2.  Semantics
    4.2.  Cookie
        4.2.1.  Syntax
        4.2.2.  Semantics
    4.3.  Controlling Caching
5.  User Agent Conformance
    5.1.  Parsing the Set-Cookie Header
        5.1.1.  The Max-Age Attribute
        5.1.2.  The Expires Attribute
        5.1.3.  The Domain Attribute
        5.1.4.  The Path Attribute
        5.1.5.  The Secure Attribute
        5.1.6.  The HttpOnly Attribute
    5.2.  Storage Model
    5.3.  The Cookie Header
6.  Implementation Considerations
    6.1.  Set-Cookie Content
    6.2.  Implementation Limits
7.  Security Considerations
    7.1.  Clear Text
    7.2.  Weak Isolation
    7.3.  Cookie Spoofing
8.  Other, Similar, Proposals
9.  Normative References
Appendix A.  Acknowledgements
Appendix B.  Tabled Items
§  Author's Address




 TOC 

1.  Introduction

This document defines the HTTP Cookie and Set-Cookie header.



 TOC 

1.1.  Syntax Notation

This specification uses the Augmented Backus-Naur Form (ABNF) notation of [RFC5234] (Crocker, D., Ed. and P. Overell, “Augmented BNF for Syntax Specifications: ABNF,” January 2008.).

The following core rules are included by reference, as defined in [RFC5234] (Crocker, D., Ed. and P. Overell, “Augmented BNF for Syntax Specifications: ABNF,” January 2008.), Appendix B.1: ALPHA (letters), CR (carriage return), CRLF (CR LF), CTL (controls), DIGIT (decimal 0-9), DQUOTE (double quote), HEXDIG (hexadecimal 0-9/A-F/a-f), LF (line feed), OCTET (any 8-bit sequence of data), SP (space), VCHAR (any visible [USASCII] character), and WSP (whitespace).



 TOC 

2.  Terminology

The terms user agent, client, server, proxy, and origin server have the same meaning as in the HTTP/1.0 specification.

Fully-qualified host name (FQHN) means either the fully-qualified domain name (FQDN) of a host (i.e., a completely specified domain name ending in a top-level domain such as .com or .uk), or the numeric Internet Protocol (IP) address of a host. The fully qualified domain name is preferred; use of numeric IP addresses is strongly discouraged. [TODO: What does "strongly discouraged" mean?]

The terms request-host and request-URI refer to the values the client would send to the server as, respectively, the host (but not port) and abs_path portions of the absoluteURI (http_URL) of the HTTP request line. Note that request-host must be a FQHN. Hosts names can be specified either as an IP address or a FQHN string.

Because it was used in Netscape's original implementation of state management, we will use the term cookie to refer to the state information that passes between an origin server and user agent, and that gets stored by the user agent.



 TOC 

3.  Overview

We outline here a way for an origin server to send state information to the user agent, and for the user agent to return the state information to the origin server.

The origin server initiates a session, if it so desires, by including a Set-Cookie header in an HTTP response. (Note that "session" here does not refer to a persistent network connection but to a logical session created from HTTP requests and responses. The presence or absence of a persistent connection should have no effect on the use of cookie-derived sessions).

A user agent returns a Cookie request header (see below) to the origin server if it chooses to continue a session. The origin server may ignore it or use it to determine the current state of the session. It may send the client a Set-Cookie response header with the same or different information, or it may send no Set-Cookie header at all.

Servers may return a Set-Cookie response headers with any response. User agents should send Cookie request headers, subject to other rules detailed below, with every request.

An origin server may include multiple Set-Cookie headers in a response. Note that an intervening gateway MUST NOT fold multiple Set-Cookie headers into a single header.

[TODO: Overview the Set-Cookie and Cookie headers.]



 TOC 

3.1.  Examples

[TODO: Put some examples here.



 TOC 

4.  Protocol Description

The cookie protocol consists of two HTTP headers: the Set-Cookie header and the Cookie header. The server sends the Set-Cookie header is to the user agent in an HTTP response, causing the user agent to modify the Cookie header it returns to the server.

This section describes the syntax and semantics of the protocol. Detailed conformance requirements for user agents are given in Section [TODO].



 TOC 

4.1.  Set-Cookie



 TOC 

4.1.1.  Syntax

Informally, the Set-Cookie response header comprises the token Set-Cookie:, followed by a cookie. Each cookie begins with a name-value-pair, followed by zero or more semi-colon-separated attribute-value pairs.

[TODO: Consider replacing this grammar with the one from 2009-11-07-Yui-Naruse.txt.]


  set-cookie-header = "Set-Cookie:" name-value-pairs
  name-value-pairs  = name-value-pair *(";" name-value-pair)
  name-value-pair   = name ["=" value]        ; optional value
  name              = token
  value             = *CHAR
  token             = <token, as defined in Section 2.2 of RFC 2616>

The valid character for the value production vary depending on the attribute name.

[TODO: Investigate what token actually means.]

Attributes names are case-insensitive. White space is permitted between tokens. Servers MUST NOT include two attributes with the same name. Note that although the above syntax description shows value as optional, some attributes require values.

The cookie-value is opaque to the user agent and MAY be anything the origin server chooses to send, possibly in a server-selected printable ASCII encoding. "Opaque" implies that the content is of interest and relevance only to the origin server. The content may, in fact, be readable by anyone who examines the Set-Cookie header.

NOTE: The syntax above allows whitespace between the attribute and the U+3D ("=") character. Servers wishing to interoperate with some legacy user agents might wish to elide this extra white space to maximize compatibility.



 TOC 

4.1.2.  Semantics

When the user agent receives a Set-Cookie header, the user agent stores the cookie in its cookie store. When the user agent makes another HTTP request to the origin server, the user agent returns the cookie in the Cookie header.

The server can override the default handling of cookies by specifying cookie attributes. User agents ignore unrecognized cookie attributes.



 TOC 

4.1.2.1.  Max-Age

[TODO: Consider removing Max-Age from the server conformance section because it's not supported by IE.]

Syntax
A sequence of ASCII numerals.
Semantics
The value of the Max-Age attribute represents the maximum lifetime of the cookie, measured in seconds from the moment the user agent receives the cookie. If the server does not supply an Expires or a Max-Age attribute, the lifetime of the cookie is limited to the current session (as defined by the user agent).



 TOC 

4.1.2.2.  Expires

Syntax
An RFC 1123 date [cite]. (Note that user agents use very forgiving date parers; see Section [TODO]).
Semantics
The value of the Expires attribute represents the maximum lifetime of the cookie, represented as the point in time at which the cookie expires. If the server does not supply an Expires or a Max-Age attribute, the lifetime of the cookie is limited to the current session (as defined by the user agent).



 TOC 

4.1.2.3.  Domain

[TODO: Test Domain.] The Domain attribute specifies the domain for which the cookie is valid. The leading dot isn't required. If there is no Domain attribute, the default is to return the cookie only to the origin server. [TODO: You can only set cookies for related domains.]



 TOC 

4.1.2.4.  Path

Syntax
A sequence of characters beginning with a "/" character.
Semantics
The Path attribute specifies the scope of the cookie within a given FQDN. The user agent will include a cookie in an HTTP request only if the Request-URI's path matches, or is a subdirectory of, the cookie's Path attribute (where the "/" character is interpreted as a directory separator). The default value for the Path attribute is the directory of the Request-URI when the cookie was received.



 TOC 

4.1.2.5.  Secure

Syntax
Servers MUST NOT include a value.
Semantics
The user agent SHOULD protect the confidentiality of cookies with the Secure attribute by not transmitting Secure cookies over an "insecure" channel (where "insecure" is defined by the user agent).



 TOC 

4.1.2.6.  HttpOnly

Syntax
Servers MUST NOT include a value.
Semantics
The user agent SHOULD protect confidentiality of cookies with the HttpOnly attribute by not revealing their contents via "non-HTTP" APIs. (Note that this document does not define which APIs are "non-HTTP".)



 TOC 

4.2.  Cookie



 TOC 

4.2.1.  Syntax

The user agent returns stored cookies to the origin server in the Cookie header. The Cookie header shares a common syntax with the Set-Cookie header, but the semantics of the header differ dramatically.

  cookie-header     = "Cookie:" name-value-pairs
  name-value-pairs  = name-value-pair *(";" name-value-pair)
  name-value-pair   = name "=" value
  name              = token
  value             = *CHAR

NOTE: If the server supplies a Set-Cookie header that does not conform to the grammar in Section [TODO], the user agent might not supply a Cookie header that conforms to the preceding grammar.



 TOC 

4.2.2.  Semantics

Each name-value-pair represents a cookie stored by the user agent. The cookie name is returned in as the name and the cookie value is returned as the value.

The meaning of the cookies in the Cookie header is not defined by this document. Servers are expected to imbue these cookies with server-specific semantics.



 TOC 

4.3.  Controlling Caching

[TODO: Should we go into this much detail here? This seems redundant with the HTTP specs.]

An origin server must be cognizant of the effect of possible caching of both the returned resource and the Set-Cookie header. Caching "public" documents is desirable. For example, if the origin server wants to use a public document such as a "front door" page as a sentinel to indicate the beginning of a session for which a Set-Cookie response header must be generated, the page should be stored in caches "pre-expired" so that the origin server will see further requests. "Private documents", for example those that contain information strictly private to a session, should not be cached in shared caches.

If the cookie is intended for use by a single user, the Set-Cookie header should not be cached. A Set-Cookie header that is intended to be shared by multiple users may be cached.

The origin server should send the following additional HTTP/1.1 response headers, depending on circumstances: [TODO: Is this good advice?]

and one of the following:

HTTP/1.1 servers must send Expires: old-date (where old-date is a date long in the past) on responses containing Set-Cookie response headers unless they know for certain (by out of band means) that there are no downstream HTTP/1.0 proxies. HTTP/1.1 servers may send other Cache-Control directives that permit caching by HTTP/1.1 proxies in addition to the Expires: old-date directive; the Cache-Control directive will override the Expires: old-date for HTTP/1.1 proxies.



 TOC 

5.  User Agent Conformance

Not all origin servers conform to the behavior specified in the previous section. To ensure interoperability, user agents MUST process cookies in a manner that is "black-box" indistinguishable from the requirements in this section.



 TOC 

5.1.  Parsing the Set-Cookie Header

Let an LWS character be either a U+20 (SPACE) or a U+09 (TAB) character.

When a user agent receives an Set-Cookie header in an HTTP response, the user agent *receives a set-cookie-string* consisting of the value of the header.

A user agent MUST use the following algorithm to parse set-cookie-strings:

  1. [TODO: Deal with "," characters. My current thinking is that we don't actually have to do anything special for them.]
  2. If the header contains a U+3B (";") character:

    the name-value-pair string is characters up to, but not including, the first U+3B (";"), and the unparsed-cookie-attributes are the remainder of the header (including the U+3B (";") in question).

    Otherwise:

    the name-value-pair string is all the character contained in the header, and the unparsed-cookie-attributes is the empty string.

  3. If the name-value-pair string contains a U+3D ("=") character:

    the (possibly empty) name string is the characters up to, but not including, the first U+3D ("=") character, and the (possibly empty) value string is the characters after the first U+3D ("=") character.

    Otherwise:

    the name string is empty, and the value string is the entire name-value-pair string.

  4. Remove any leading or trailing space from the name string and the value string.
  5. The cookie-name is the name string, and the cookie-value is the value string.

The user agent MUST use the following algorithm to parse the unparsed-attributes:

  1. If the unparsed-attributes string is empty, skip the rest of these steps.
  2. Consume the first character of the unparsed-attributes (which will be a U+3B (";") character).
  3. If the remaining unparsed-attributes contains a U+3B (";") character:

    Consume the characters of the unparsed-attributes up to, but not including, the first U+3B (";") character.

    Otherwise:

    Consume the remainder of the unparsed-attributes.

    The characters consumed in this step comprise the attribute-value-pair string.
  4. If the attribute-value-pair string contains a U+3D ("=") character:

    the (possibly empty) name string is the characters up to, but not including, the first U+3D ("=") character, and the (possibly empty) value string is the characters after the first U+3D ("=") character .

    Otherwise:

    the name string is the entire attribute-value-pair string, and the value string is empty. (Note that this step differs from the analogous step when parsing the name-value-pair string.)

  5. Remove any leading or trailing space from the name string and the value string.
  6. If the name is a ASCII case-insensitive match for an entry in the following table, process the value string as instructed.
    
           Attribute  |  Instruction
          ------------+---------------------
           Max-Age    |  See Section [TODO]
           Expires    |  See Section [TODO]
           Domain     |  See Section [TODO]
           Path       |  See Section [TODO]
           Secure     |  See Section [TODO]
           HttpOnly   |  See Section [TODO]
    
    
  7. Return to Step 1.

[TODO: Can parsing a cookie ever fail? Doesn't look like it! Well, unless you count "Set-Cookie: " as a fail...]

When the user agent finishes parsing the set-cookie-string header, the user agent *receives a cookie* from the origin server with name cookie-name, value cookie-value, and attributes cookie-attribute-list.



 TOC 

5.1.1.  The Max-Age Attribute

When the user agent receives a cookie attribute with a name string that case-insensitively matches the string "Max-Age", the user agent MUST process the value string as follows.

If the first character of the value string is not a DIGIT or a "-" character, the user agent MUST ignore the attribute.

If the remainder of value string contains a non-DIGIT character, the user agent MUST ignore the attribute.

Let delta-seconds be the contents of the value string converted to an integer.

If delta-seconds is less than or equal to 0, then append an attribute named Expires (note the name conversion) to the cookie-attribute-list with a value equal to the current date and time.

If delta-seconds is strictly greater than 0, then append an attribute named Expires (note the name conversion) to the cookie-attribute-list with a value equal to the current date and time plus delta-seconds seconds.



 TOC 

5.1.2.  The Expires Attribute

Unfortunately, cookie dates are quite complex for historical reasons.

When the user agent receives a cookie attribute with a name string that case-insensitively matches the string "Expires", the user agent MUST process the value string as follows.

If the attribute lacks a value or the value is the empty string, abort these steps.

Using the grammar below, divide the value of the attribute into date-tokens.


      cookie-date     = date-token-list
      date-token-list = date-token [ delimiter date-token-list ]
      delimiter       = %x09 / %x20 / %x21 / %x22 / %x23 / %x24 /
                        %x25 / %x26 / %x27 / %x28 / %x29 / %x2A /
                        %x2B / %x2C / %x2D / %x2E / %x2F / %x3B /
                        %x3C / %x3D / %x3E / %x3F / %x40 / %x5B /
                        %x5C / %x5D / %x5E / %x5F / %x60 / %x7B /
                        %x7C / %x7D / %x7E
      date-token      = day-of-month / month / year / time / mystery
      day-of-month    = 2DIGIT / DIGIT
      month           = "jan" [ mystery ] / "feb" [ mystery ] /
                        "mar" [ mystery ] / "apr" [ mystery ] /
                        "may" [ mystery ] / "jun" [ mystery ] /
                        "jul" [ mystery ] / "aug" [ mystery ] /
                        "sep" [ mystery ] / "oct" [ mystery ] /
                        "nov" [ mystery ] / "dec" [ mystery ]
      year            = 5DIGIT / 4DIGIT / 3DIGIT / 2DIGIT / DIGIT
      time            = 2DIGIT ":" 2DIGIT ":" 2DIGIT
      mystery         = <anything except a delimiter>

Process each data-token sequentially in the order the date-tokens appear in the attribute value:

  1. If the found-day-of-month flag is not set and the token matches the day-of-month production, set the found-day-of-month flag and set the day-of-month-value to the number denoted by the token. Skip the remaining sub-steps and continue to the next token.
  2. If the found-month flag is not set and the token matches the month production, set the found-month flag and set the month-value to the month denoted by the token. Skip the remaining sub-steps and continue to the next token.
  3. If the found-year flag is not set and the token matches the year production, set the found-year flag and set the year-value to the number denoted by the token. Skip the remaining sub-steps and continue to the next token.
  4. If the found-time flag is not set and the token matches the time production, set the found-time flag and set the hour-value, minute-value, and second-value to the numbers denoted by the digits in the token, respectively. Skip the remaining sub-steps and continue to the next token.

Abort these steps if

If the year-value is greater than 68 and less than 100, increment the year-value by 1900.

If the year-value is greater than or equal to 0 and less than 69, increment the year-value by 2000.

Let the expiry-time be the date whose day-of-month, month, year, hour, minute, and second (in GMT) are the day-of-month-value, the month-value, the year-value, the hour-value, the minute-value, and the second-value, respectively.

If the expiry-time is later than the last date the user agent can represent, the user agent MAY replace the expiry-time with the last representable date.

If the expiry-time is earlier than the first date the user agent can represent, the user agent MAY replace the expiry-time with the first representable date.

Append an attribute named Expires to the cookie-attribute-list with a value equal to expiry-time.



 TOC 

5.1.3.  The Domain Attribute

When the user agent receives a cookie attribute with a name string that case-insensitively matches the string "Domain", the user agent MUST process the value string as follows:



 TOC 

5.1.4.  The Path Attribute

The user agent MUST use the following algorithm to compute the default-path of a cookie:

  1. Let uri-path be the path portion of the URI from which the user agent received the cookie. [TODO: Define this more precisely.]
  2. If the first character of the uri-path is not a "/" character, output "/" and skip the remaining steps.
  3. If the uri-path contains only a single "/" character, output "/" and skip the remaining steps.
  4. Output the characters of the uri-path from the first character up to, and but not including, the right-most "/".

A request-path path-matches a cookie-path if the cookie-path is a prefix of the request-path and at least one of the following conditions hold:

When the user agent receives a cookie attribute with a name string that case-insensitively matches the string "Path", the user agent MUST process the value string as follows:

[TODO: Test \ ? ; # $ % etc]



 TOC 

5.1.5.  The Secure Attribute

When the user agent receives a cookie attribute with a name string that case-insensitively matches the string "Secure", the user agent MUST append an attribute named Secure to the cookie-attribute-list with an empty value regardless of the value string.



 TOC 

5.1.6.  The HttpOnly Attribute

When the user agent receives a cookie attribute with a name string that case-insensitively matches the string "HttpOnly", the user agent MUST append an attribute named HttpOnly to the cookie-attribute-list with an empty value regardless of the value string.



 TOC 

5.2.  Storage Model

When the user agent receives a cookie, the user agent SHOULD record the cookie in its cookie store as follows.

A user agent MAY ignore received cookies in their entirety if the user agent is configured to block receiving cookie for a particular response. For example, the user agent might wish to block receiving cookies from "third-party" responses.

The user agent stores the following fields about each cookie:

When the user agent receives a cookie, the user agent MUST follow the following algorithm:

  1. Create a new cookie based on the parsed Set-Cookie header:
    1. Create a new cookie with the following default field values:
      • name = the cookie-name
      • value = the cookie-value
      • expiry = the latest representable date
      • domain = the request-host
      • path = the cookie's default-path
      • last-access = the date and time the cookie was received
      • persistent = false
      • host-only = true
      • secure-only = false
      • http-only = false
    2. Update the default field values according to the cookie-attributes:
      expiry
      If the cookie-attributes contains at least one valid Expires attribute, store the expiry-value of the last such attribute in the expiry field. Store the value true in the persistent field. [TODO: Test that this really works when mixing Max-Age and Expires.]
      domain
      If the cookie-attributes contains at least one Domain attribute, store the value of the last such attribute in the domain field. Store the value false in the host-only field. [TODO: Reject cookies for unrelated domains.] [TODO: If the URL's host is an IP address, let Domain to be an IP address if it matches the URL's host exactly, but set the host-only flag. ]
      path
      If the cookie-attributes contains at least one Path attribute, store the value of the last such attribute in the path field.
      secure-only
      If the cookie-attributes contains at least one Secure attribute, store the value true in the secure-only field.
      http-only
      If the cookie-attributes contains at least one HttpOnly attribute, store the value true in the http-only field.
  2. Remove from the cookie store all cookies that have the share the same name, domain, path, and host-only fields as the newly created cookie. [TODO: Validate this list!] [TODO: There's some funny business around http-only here.]
  3. Insert the newly created cookie into the cookie store.

The user agent MUST evict a cookie from the cookie store if A cookie exists in the cookie store with an expiry date in the past.

The user agent MAY evict a cookie from the cookie store if the number of cookies sharing a domain field exceeds some predetermined upper bound (such as 50 cookies). [TODO: Explain where 50 comes from.]

The user agent MAY evict cookies from the cookie store if the cookie store exceeds some maximum storage bound (such as 3000 cookies). [TODO: Explain where 3000 comes from.]

When the user agent evicts cookies from the cookie store, the user agent MUST evict cookies in the following priority order:

  1. Cookies with an expiry date in the past.
  2. Cookies that share a domain field more than a predetermined number of other cookies.
  3. All other cookies.

If two cookies have the same removal priority, the user agent MUST evict the cookie with the least recent last-access date first.

When "the current session is over", the user agent MUST remove from the cookie store all cookies with the persistent field set to false.

NOTE: This document does not define when "the current session is over." Many user agents remove non-persistent cookies when they exit. However, other user agent expire non-persistent cookies using other heuristics.



 TOC 

5.3.  The Cookie Header

When the user agent generates an HTTP request for a particular URI, the user agent SHOULD attach exactly one HTTP header named Cookie if the cookie-string (defined below) for that URI is non-empty.

A user agent MAY elide the Cookie header in its entirety if the user agent is configured to block sending cookie for a particular request. For example, the user agent might wish to block sending cookies during "third-party" requests.

The user agent MUST use the following algorithm to compute the cookie-string from a cookie store and a URI:

  1. Let cookie-list be the set of cookies from the cookie store that meet the following requirements: NOTE: The Cookie header will not contain any expired cookies because cookies past their expiry date are removed from the cookie store immediately.
  2. Sort the cookie-list in the following order:
  3. Update the last-access field of each cookie in the cookie-list to the current date.
  4. Serialize the cookie-list into a cookie-string by processing each cookie in the cookie-list in order:
    1. If the cookie's name and value fields are both empty, skip the remaining steps for this cookie and continue to the next cookie, if any.
    2. If the cookie's name field is non-empty, output the cookie's name field followed by the character U+3D ("=").
    3. Output the cookie's value field.
    4. If there is an unprocessed cookie in the cookie-list, output the characters U+3B and U+20 ("; ")



 TOC 

6.  Implementation Considerations



 TOC 

6.1.  Set-Cookie Content

An origin server's content should probably be divided into disjoint application areas, some of which require the use of state information. The application areas can be distinguished by their request URLs. The Set-Cookie header can incorporate information about the application areas by setting the Path attribute for each one.

The session information can obviously be clear or encoded text that describes state. However, if it grows too large, it can become unwieldy. Therefore, an implementor might choose for the session information to be a key to a server-side resource. [TODO: Describe briefly how to generate a decent session key.]

[TODO: We could recommend that servers encrypt and mac their cookie data.]

[TODO: Mention issues that arise from having multiple concurrent sessions.]



 TOC 

6.2.  Implementation Limits

Practical user agent implementations have limits on the number and size of cookies that they can store. General-use user agents SHOULD provide each of the following minimum capabilities:

The information in a Set-Cookie response header must be retained in its entirety. If for some reason there is inadequate space to store the cookie, the cookie must be discarded, not truncated.

Applications should use as few and as small cookies as possible, and they should cope gracefully with the loss of a cookie. [TODO: Could mention latency issues that arise from having tons of cookies.]



 TOC 

7.  Security Considerations



 TOC 

7.1.  Clear Text

The information in the Set-Cookie and Cookie headers is transmitted in the clear. Three consequences are:

  1. Any sensitive information that is conveyed in in the headers is exposed to an eavesdropper.
  2. A malicious intermediary could alter the headers as they travel in either direction, with unpredictable results.
  3. A malicious client could alter the Cookie header before transmission, with unpredictable results.

These facts imply that information of a personal and/or financial nature should be sent over a secure channel. For less sensitive information, or when the content of the header is a database key, an origin server should be vigilant to prevent a bad Cookie value from causing failures.



 TOC 

7.2.  Weak Isolation

[TODO: Weak isolation by port.]

[TODO: Weak isolation by scheme (e.g., ftp, gopher, etc).]



 TOC 

7.3.  Cookie Spoofing

[TODO: Mention integrity issue where a sibling domain can inject cookies.]

[TODO: Mention integrity issue where a HTTP can inject cookies into HTTPS.]



 TOC 

8.  Other, Similar, Proposals

[TODO: Describe relation to the Netscape Cookie Spec, RFC 2109, RFC 2629, and cookie-v2.]



 TOC 

9. Normative References

[RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” RFC 2616, June 1999.
[RFC5234] Crocker, D., Ed. and P. Overell, “Augmented BNF for Syntax Specifications: ABNF,” STD 68, RFC 5234, January 2008.


 TOC 

Appendix A.  Acknowledgements

This document borrows heavily from RFC 2109. [TODO: Figure out the proper way to credit the authors of RFC 2109.]



 TOC 

Appendix B.  Tabled Items

Tabled items:



 TOC 

Author's Address

  Adam Barth
  University of California, Berkeley
Email:  abarth@eecs.berkeley.edu
URI:  http://www.adambarth.com/