EPON MIB WG L. Khermosh Internet-Draft Passave Technologies Expires: March 21, 2005 September 20, 2004 Managed Objects of EPON draft-ietf-hubmib-efm-epon-mib-02.txt Status of this Memo This document is an Internet-Draft and is subject to all provisions of section 3 of RFC 3667. By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she become aware will be disclosed, in accordance with RFC 3668. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on March 21, 2005. Copyright Notice Copyright (C) The Internet Society (2004). Abstract This document defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP based Internets. In particular, it defines objects for managing devices and interfaces that conform to the Ethernet Passive Optical Networks (EPON) standards as defined in IEEE Draft 802.3ah-2004 Draft 3.3. The document contains a list of management entities based on the registers defined in the Institute of Electrical and Electronic Engineers, IEEE Draft 802.3ah-2004 Draft 3.3 Annex 30A and mainly Khermosh Expires March 21, 2005 [Page 1] Internet-Draft Managed Objects of EPON September 2004 partitioned accordingly. Table of Contents 1. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. The Internet-Standard Management Framework . . . . . . . . . . 4 3. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4. Relationship of the EFM EPON MIB and EPON device MIB to other MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4.1 Relationship of the EFM EPON MIB to the Interfaces MIB, the Ethernet-like Interfaces MIB and the MAU MIB EFM EPON interfaces . . . . . . . . . . . . . . . . . . . 6 4.2 Relationship of the EFM EPON MIB to the OAM EFM MIB . . . 6 4.3 Relationship of the EPON Device MIB to EFM EPON MIB . . . 6 4.4 Relationship of the EPON Device MIB to Optical interface MIB . . . . . . . . . . . . . . . . . . . . . . 6 4.5 Relationship of the EPON Device MIB to bridge MIB . . . . 6 4.6 Relationship of the EPON Device MIB to the Entity MIB . . 6 5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 7 6. MIB structure . . . . . . . . . . . . . . . . . . . . . . . . 8 7. Relationship table of the dot3EFM MIB module objects to the IEEE802.3ah objects . . . . . . . . . . . . . . . . . . . 9 8. Definitions - The EFM EPON MIB module . . . . . . . . . . . . 13 9. Definitions - The EPON Device MIB . . . . . . . . . . . . . . 40 10. Security Considerations . . . . . . . . . . . . . . . . . . 72 11. References . . . . . . . . . . . . . . . . . . . . . . . . . 75 11.1 Normative References . . . . . . . . . . . . . . . . . . . . 75 11.2 Informative References . . . . . . . . . . . . . . . . . . . 76 Author's Address . . . . . . . . . . . . . . . . . . . . . . . 76 Intellectual Property and Copyright Statements . . . . . . . . 77 Khermosh Expires March 21, 2005 [Page 2] Internet-Draft Managed Objects of EPON September 2004 1. Terminology Key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. Khermosh Expires March 21, 2005 [Page 3] Internet-Draft Managed Objects of EPON September 2004 2. The Internet-Standard Management Framework For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410]. Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580]. Khermosh Expires March 21, 2005 [Page 4] Internet-Draft Managed Objects of EPON September 2004 3. Overview This document defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP based Internets. In particular, it defines objects for managing devices and interfaces that conform to the Ethernet Passive Optical Networks (EPON) standards as defined in [802.3ah]. The document contains a list of management entities based on the registers defined in [802.3ah] Annex 30A and partitioned accordingly. The document also contains a device group section defining the MIB modules for EPON from a device perspective, that are connected directly to the IEEE 802.3ah specifications. The document also provides amendments to the 802.3 MAU MIB modules documents for the EFM EPON device type addition. Khermosh Expires March 21, 2005 [Page 5] Internet-Draft Managed Objects of EPON September 2004 4. Relationship of the EFM EPON MIB and EPON device MIB to other MIBs 4.1 Relationship of the EFM EPON MIB to the Interfaces MIB, the Ethernet-like Interfaces MIB and the MAU MIB EFM EPON interfaces require implementation of Interfaces MIB module [RFC2863], Ethernet-like Interfaces MIB module [RFC3635] and MAU-MIB module [RFC3636]. The MIB modules defined in this document are an extension for these MIB modules. For instance, The module is defining dot3MpcpRemoteMACAddress only while assuming the local MAC address attribute is already defined in [RFC3635]. 4.2 Relationship of the EFM EPON MIB to the OAM EFM MIB EFM EPON interfaces require implementation of OAM EFM MIB module [I-D.ietf-hubmib-efm-mib]. This document defines OAM MIB module attributes and managed objects that are complementary to the EFM EPON MIB module. 4.3 Relationship of the EPON Device MIB to EFM EPON MIB EPON devices require implementation of the EFM EPON MIB module which are specified in this document. The opposite is not required as it possible to implement the EFM interfaces by itself. 4.4 Relationship of the EPON Device MIB to Optical interface MIB EPON devices may implement the Optical interface MIB module [RFC3591]. The optical interface MIB module document defines optical interface attributes and managed objects that are assumed to be used by an EPON device. 4.5 Relationship of the EPON Device MIB to bridge MIB EPON OLT devices may implement the bridge MIB modules [RFC1493], [RFC1525], Where the LLIDs of the PON are referred as the bridge ports. There is a direct mapping between the bridge ports and the LLIDs, which are virtual bridge ports. Attributes in the bridge MIB module should be used accordingly. This document defines managed objects for a bridge that are assumed to be used by an EPON OLT device which bridges the data between the LLIDs of the PON. 4.6 Relationship of the EPON Device MIB to the Entity MIB EPON OLT devices may implement the Entity MIB modules [RFC2737], Where attributes like physical device ID and physical status, Hardware status are used from that MIB module Khermosh Expires March 21, 2005 [Page 6] Internet-Draft Managed Objects of EPON September 2004 5. IANA Considerations The EFM EPON MIB module requires the allocation of a single object identifier for its MODULE-IDENTITY under the MIB-2 tree. The EPON Device MIB module requires the allocation of a single object identifier for its MODULE-IDENTITY under the MIB-2 tree. IANA has not yet allocated these object identifiers. Khermosh Expires March 21, 2005 [Page 7] Internet-Draft Managed Objects of EPON September 2004 6. MIB structure This document includes two MIB modules, the first is the EFM EPON MIB module and the second is the EPON device MIB module. The EFM EPON MIB module defines the objects used for configuration and description of the [802.3ah] P2MP section. These MIB module objects are included in three MIB module groups. The MPCP MIB module definition - MIB module related to [802.3ah] clause 64 Multi Point Control Protocol attributes. In this MIB module group: The dot3MpcpTable defines the objects used for the configuration and description of the status of MPCP ([802.3ah] Multi-Point Control Protocol) compliant interfaces. The dot3MpcpStatTable defines the statistics group for MPCP compliant interfaces. The OMPEmulation MIB module definitions - MIB module related to [802.3ah] clause 65 point to point emulation attributes. In this MIB module group: The dot3OmpEmulationTable defines the objects used for the configuration and description of the status of OMPEmulation compliant interfaces. The dot3OmpEmulationStatTable defines the statistics group for OMPEmulation compliant interfaces. The MAU MIB module definition including MAU type definitions and EPON MAU managed object related to [802.3ah] clause 60 and clause 65. The dot3EponMauTable defines the objects used for the configuration and description of the status of MAU EPON compliant interfaces. The dot3EponMauType defines the Type group for [802.3ah] EPOM MAUs. Editor note - Editor recommands the MAU Type object should be in [802.3] MAU type objects [RFC3636]. The EPON Device MIB module defines the objects used for configuration and description of management objects for EPON compliant Devices. The eponDeviceControlTable defines the objects used for the configuration and description of the EPON compliant devices. The eponDeviceRemoteMACAddressLLIDTable defines the objects used for configuration and description of the MacAddress to LLID table used for the bridge emulation of the EPON devices. The eponDeviceStatTable defines the objects used for the statistics group of the EPON devices. The eponDeviceEventObjectTable defines the objects used for configuration and desription of specific Events of the EPON devices. The eponDeviceEventsLogTable defines the objects used for the events log of the EPON devices. Khermosh Expires March 21, 2005 [Page 8] Internet-Draft Managed Objects of EPON September 2004 7. Relationship table of the dot3EFM MIB module objects to the IEEE802.3ah objects oMPCP managed object class (30.3.5) +----------------------+----------------------+---------------------+ | dot3EFM MIB module | IEEE802.3ah object | Reference | | object | | | +----------------------+----------------------+---------------------+ | dot3MpcpID | aMPCPID | 30.3.5.1.1 | | | | | | dot3MpcpAdminState | aMPCPAdminState | 30.3.5.1.2 | | | | | | dot3MpcpMode | aMPCPMode | 30.3.5.1.3 | | | | | | dot3MpcpLinkID | aMPCPLinkID | 30.3.5.1.4 | | | | | | dot3MpcpRemoteMACAdd | aMPCPRemoteMACAddres | 30.3.5.1.5 | | ess | | | | | | | | dot3MpcpRegistration | aMPCPRegistrationSta | 30.3.5.1.6 | | tate | e | | | | | | | dot3MpcpMACCtrlFrame | aMPCPMACCtrlFramesTr | 30.3.5.1.7 | | Transmitted | nsmitted | | | | | | | dot3MpcpMACCtrlFrame | aMPCPMACCtrlFramesRe | 30.3.5.1.8 | | Received | eived | | | | | | | dot3MpcpTxGate | aMPCPTxGate | 30.3.5.1.9 | | | | | | dot3MpcpTxRegAck | aMPCPTxRegAck | 30.3.5.1.10 | | | | | | dot3MpcpTxRegister | aMPCPTxRegister | 30.3.5.1.11 | | | | | | dot3MpcpTxRegRequest | aMPCPTxRegRequest | 30.3.5.1.12 | | | | | | dot3MpcpTxReport | aMPCPTxReport | 30.3.5.1.13 | | | | | | dot3MpcpRxGate | aMPCPRxGate | 30.3.5.1.14 | | | | | | dot3MpcpRxRegAck | aMPCPRxRegAck | 30.3.5.1.15 | | | | | | dot3MpcpRxRegister | aMPCPRxRegister | 30.3.5.1.16 | | | | | | dot3MpcpRxRegRequest | aMPCPRxRegRequest | 30.3.5.1.17 | | | | | | dot3MpcpRxReport | aMPCPRxReport | 30.3.5.1.18 | Khermosh Expires March 21, 2005 [Page 9] Internet-Draft Managed Objects of EPON September 2004 | | | | | dot3MpcpTransmitElap | aMPCPTransmitElapsed | 30.3.5.1.19 | | ed | | | | | | | | dot3MpcpReceiveElaps | aMPCPReceiveElapsed | 30.3.5.1.20 | | d | | | | | | | | dot3MpcpRoundTripTim | aMPCPRoundTripTime | 30.3.5.1.21 | | | | | | | | | | dot3MpcpDiscoveryWin | aMPCPDiscoveryWindow | 30.3.5.1.22 | | owsSent | Sent | | | | | | | dot3MpcpDiscoveryTim | aMPCPDiscoveryTimeou | 30.3.5.1.23 | | out | | | | | | | | dot3MpcpMaximumPendi | aMPCPMaximumPendingG | 30.3.5.1.24 | | gGrants | ants | | | | | | | dot3MPCPAdminControl | acMPCPAdminControl | 30.3.5.2.1 | | | | | | dot3MpcpOnTime | laserOnTime | 64.3.5.1 | | | | | | dot3MpcpOffTime | laserOffTime | 64.3.5.1 | | | | | | dot3MpcpSyncTime | SyncTime | 64.3.3.2 | | | | | | dot3MpcpRxNotSupport | | | | dMPCP | | | +----------------------+----------------------+---------------------+ Table 1 Khermosh Expires March 21, 2005 [Page 10] Internet-Draft Managed Objects of EPON September 2004 oOMPEmulation managed object class (30.3.7) +----------------------+----------------------+---------------------+ | dot3EFM MIB module | IEEE802.3ah object | Reference | | object | | | +----------------------+----------------------+---------------------+ | dot3OmpEmulationID | aOMPEmulationID | 30.3.7.1.1 | | | | | | dot3OmpEmulationType | aOMPEmulationType | 30.3.7.1.2 | | | | | | dot3OmpEmulationSLDE | aSLDErrors | 30.3.7.1.3 | | rors | | | | | | | | dot3OmpEmulationCRC8 | aCRC8Errors | 30.3.7.1.4 | | rrors | | | | | | | | dot3OmpEmulationGood | aGoodLLID | 30.3.7.1.5 | | LID | | | | | | | | dot3OmpEmulationOnuP | aONUPONcastLLID | 30.3.7.1.6 | | nCastLLID | | | | | | | | dot3OmpEmulationOltP | aOLTPONcastLLID | 30.3.7.1.7 | | nCastLLID | | | | | | | | dot3OmpEmulationBadL | aBadLLID | 30.3.7.1.8 | | ID | | | | | | | | dot3OmpEmulationBroa | | | | castLLIDNotOnuID | | | | | | | | dot3OmpEmulationOnuL | | | | IDNotBroadcast | | | | | | | | dot3OmpEmulationBroa | | | | castLLIDPlusOnuId | | | | | | | | dot3OmpEmulationNotB | | | | oadcastLLIDNotOnuId | | | +----------------------+----------------------+---------------------+ Table 2 Khermosh Expires March 21, 2005 [Page 11] Internet-Draft Managed Objects of EPON September 2004 oMAU managed object class (30.5.1) +----------------------+----------------------+---------------------+ | dot3EFM MIB module | IEEE802.3ah object | Reference | | object | | | +----------------------+----------------------+---------------------+ | dot3EponMauType | aMAUType | 30.5.1.1.2 | | | | | | dot3EponMauPCSCoding | aPCSCodingViolation | 30.5.1.1.12 | | iolation | | | | | | | | dot3EponMauFecAbilit | aFECAbility | 30.5.1.1.13 | | | | | | | | | | dot3EponMauFecMode | aFECmode | 30.5.1.1.14 | | | | | | dot3EponMauFECCorrec | aFECCorrectedBlocks | 30.5.1.1.15 | | edBlocks | | | | | | | | dot3EponMauFECUncorr | aFECUncorrectableBlo | 30.5.1.1.16 | | ctableBlocks | ks | | | | | | | dot3EponMauBufferHea | | | | CodingViolation | | | +----------------------+----------------------+---------------------+ Table 3 Khermosh Expires March 21, 2005 [Page 12] Internet-Draft Managed Objects of EPON September 2004 8. Definitions - The EFM EPON MIB module (See section 30.2.5 in [802.3ah] for details) DOT3-EFM-EPON-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, mib-2, OBJECT-TYPE, Counter32, Integer32, OBJECT-IDENTITY FROM SNMPv2-SMI TruthValue, MacAddress FROM SNMPv2-TC ifIndex FROM IF-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ; dot3EfmeponMIB MODULE-IDENTITY LAST-UPDATED "200409210000Z" -- September 21, 2004 ORGANIZATION "IETF Ethernet Interfaces and Hub MIB Working Group" CONTACT-INFO "WG charter: http://www.ietf.org/html.charters/hubmib-charter.html Mailing Lists: General Discussion: hubmib@ietf.org To Subscribe: hubmib-request@ietf.org In Body: subscribe your_email_address Chair: Dan Romascanu Postal: Avaya Inc. Atidim Technology Park, Bldg. 3 Tel Aviv 61131 Israel Tel: +972-3-645-8414 E-mail: dromasca@avaya.com Editor: Lior Khermosh Postal: Passave Technologies Inc. Ackerstein Towers, Tower A, 6th floor, 9 Hamenofim St. Hertzliya Pituach 46725, ISRAEL P.O.Box 2089 Hertzliya Pituach 46120 Israel Tel: +972-9-9717600 Ext: 7181 Khermosh Expires March 21, 2005 [Page 13] Internet-Draft Managed Objects of EPON September 2004 E-mail: lior.khermosh@passave.com" DESCRIPTION "The objects in this MIB module are used to manage the Ethernet in the First Mile (EFM) Multi Point Control Protocol (MPCP) Interfaces as defined in IEEE Draft P802.3ah/D3.0 clause 64,65. The following reference is used throughout this MIB module: [802.3ah] refers to: IEEE Draft P802.3ah/D3.3: 'Draft amendment to - Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - Media Access Control Parameters, Physical Layers and Management Parameters for subscriber access networks', 22 April 2004. Of particular interest are Clause 64(MPCP) 65(P2MP RS) and 60 (PON PMDs). Clause 30, 'Management', and Clause 45, 'Management Data Input/Output (MDIO) Interface'. Copyright (C) The Internet Society (2004). This version of this MIB module is part of XXXX see the RFC itself for full legal notices." -- Editor's Note: Replace XXXX with the actual RFC number -- assigned by RFC Editor and remove this note REVISION "200409210000Z" -- September 21, 2004 DESCRIPTION "Initial version, published as RFC XXXX." ::= { mib-2 XXX } -- Editor's Note: Replace XXX with a real OID once it is -- assigned by IANA and remove this note. -- Editor-s note: MPCP MIB modules definitions ([802.3ah] --- clause 30.3.5) -- Editor-s note: Description in attributes with References should be -- minimized in later versions dot3MpcpMIB OBJECT IDENTIFIER ::= { dot3EfmeponMIB 1} dot3MpcpObjects OBJECT IDENTIFIER ::= { dot3MpcpMIB 1} dot3MpcpConformance OBJECT IDENTIFIER ::= { dot3MpcpMIB 2} Khermosh Expires March 21, 2005 [Page 14] Internet-Draft Managed Objects of EPON September 2004 dot3MpcpTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot3MpcpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for dot3 Multi-Point Control Protocol (MPCP) MIB modules." ::= { dot3MpcpObjects 1 } dot3MpcpEntry OBJECT-TYPE SYNTAX Dot3MpcpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the dot3 MPCP MIB modules table." INDEX { ifIndex } ::= { dot3MpcpTable 1 } Dot3MpcpEntry ::= SEQUENCE { dot3MpcpID Integer32, dot3MpcpOperStatus TruthValue, dot3MpcpMode INTEGER, dot3MpcpLinkID Integer32, dot3MpcpRemoteMACAddress MacAddress, dot3MpcpRegistrationState INTEGER, dot3MpcpTransmitElapsed Integer32, dot3MpcpReceiveElapsed Integer32, dot3MpcpRoundTripTime Integer32, dot3MpcpMaximumPendingGrants Integer32, dot3MpcpAdminState TruthValue, dot3MpcpOnTime Integer32, dot3MpcpOffTime Integer32, dot3MpcpSyncTime Integer32 } dot3MpcpID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable is assigned so as to uniquely identify the Multi-Point MAC Control (MPCP) entity, as defined in [802.3ah] clause 64, among the subordinate managed objects of the containing object. This attribute is relevant for an OLT and an ONU." REFERENCE "[802.3ah], 30.3.5.1.1." ::= { dot3MpcpEntry 1 } Khermosh Expires March 21, 2005 [Page 15] Internet-Draft Managed Objects of EPON September 2004 dot3MpcpOperStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable can be used to define the operational state of the Multi-Point MAC Control sublayer as defined in [802.3ah] clause 64. Selecting admin for an interface with Multi-Point MAC Control sublayer. When the attribute is True the the interface will act as if Multi-point control protocol is enabled. When the attribute is False the interface will act as if it does not have the Multi-point control protocol. The operational state can be changed using the dot3MpcpAdminState attribute. This attribute is relevant for an OLT and an ONU." REFERENCE "[802.3ah], 30.3.5.1.2." ::= { dot3MpcpEntry 2 } dot3MpcpMode OBJECT-TYPE SYNTAX INTEGER { olt(1), onu(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable can be used to identify the operational state of the Multi-Point MAC Control sublayer as defined in [802.3ah] clause 64. Selecting olt(1) for an OLT (server) mode and onu(2) for an ONU (client) mode. Writing can be done during only during initialization, when dot3MpcpOperStatus indicates Flase. This attribute is relevant for an OLT and an ONU." REFERENCE "[802.3ah], 30.3.5.1.3." DEFVAL { 1 } ::= { dot3MpcpEntry 3 } dot3MpcpLinkID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only value that identifies the Logical Link identity (LLID) associated with the MAC port as specified in [802.3ah] clause 65.1.3.2.2. This attribute is relevant for an OLT and an ONU." REFERENCE "[802.3ah], 30.3.5.1.4." Khermosh Expires March 21, 2005 [Page 16] Internet-Draft Managed Objects of EPON September 2004 ::= { dot3MpcpEntry 4 } dot3MpcpRemoteMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only value that identifies the source_address parameter of the last MPCPDUs passed to the MAC Control. This value is updated on reception of a valid frame with (1) a destination Field equal to the reserved multicast address for MAC Control specified in [802.3ah] Annex 31A, (2) lengthOrType field value equal to the reserved Type for MAC Control as specified in [802.3ah] Annex 31A. (3) an MPCP subtype value equal to the subtype reserved for MPCP as specified in [802.3ah] Annex 31A. This attribute is relevant for an OLT and an ONU." REFERENCE "[802.3ah], 30.3.5.1.5." ::= { dot3MpcpEntry 5 } dot3MpcpRegistrationState OBJECT-TYPE SYNTAX INTEGER { unregistered(1), registering(2), registered(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only value that identifies the operational state of the Multi-Point MAC Control sublayer as defined in [802.3ah] clause 64. When this attribute has the enumeration unregistered(1) the interface may be used for registering a link partner. When this attribute has the enumeration registering(2) the interface is in the process of registering a link-partner. When this attribute has the enumeration registered(3) the interface has an established link-partner. This attribute is relevant for an OLT and an ONU. For the OLT it provides an indication per LLID." REFERENCE "[802.3ah], 30.3.5.1.6." ::= { dot3MpcpEntry 6 } dot3MpcpTransmitElapsed OBJECT-TYPE SYNTAX Integer32 UNITS "TQ (16nsec)" MAX-ACCESS read-only STATUS current Khermosh Expires March 21, 2005 [Page 17] Internet-Draft Managed Objects of EPON September 2004 DESCRIPTION "A read-only value that reports the interval from last MPCP frame transmission in increments of Time Quanta (TQ) 16ns. The value returned shall be (interval from last MPCP frame transmission in ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. This attribute is relevant for an OLT and an ONU." REFERENCE "[802.3ah], 30.3.5.1.19." ::= { dot3MpcpEntry 7 } dot3MpcpReceiveElapsed OBJECT-TYPE SYNTAX Integer32 UNITS "TQ (16nsec)" MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only value that reports the interval from last MPCP frame reception in increments of Time Quanta (TQ) 16ns. The value returned shall be (interval from last MPCP last MPCP frame reception in ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. This attribute is relevant for an OLT and an ONU." REFERENCE "[802.3ah], 30.3.5.1.20." ::= { dot3MpcpEntry 8 } dot3MpcpRoundTripTime OBJECT-TYPE SYNTAX Integer32 UNITS "TQ (16nsec)" MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only value that reports the MPCP round trip time in increments of Time Quanta (TQ) 16ns. The value returned shall be (round trip time in ns)/16. If this value exceeds (2^16-1) the value (2^16-1) shall be returned. This attribute is relevant for an OLT and an ONU. For the OLT there is a value per LLID" REFERENCE "[802.3ah], 30.3.5.1.21." ::= { dot3MpcpEntry 9 } dot3MpcpMaximumPendingGrants OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only value that indicates the maximum number of grants an ONU can store. The maximum number of grants an ONU can store has a range of 0 to 255. Khermosh Expires March 21, 2005 [Page 18] Internet-Draft Managed Objects of EPON September 2004 This attribute is relevant for an OLT and an ONU. For the OLT there is a value per LLID" REFERENCE "[802.3ah], 30.3.5.1.24." ::= { dot3MpcpEntry 10 } dot3MpcpAdminState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable can be used to define the operational state of the Multi-Point MAC Control sublayer as defined in [802.3ah] clause 64. Selecting admin for an interface with Multi-Point MAC Control sublayer. When selecting the value as True the interface Multi-Point control protocol is enabled. When selecting the value as False the interface acts as if the Multi-point Control protocol does not exist. Reading reflects the state of the attribute and the operation of the Multi-point control protocol mode of the interface. Writing can be done all the time. This attribute is relevant for an OLT and an ONU." REFERENCE "[802.3ah], 30.3.5.2.1." DEFVAL { false } ::= { dot3MpcpEntry 11 } dot3MpcpOnTime OBJECT-TYPE SYNTAX Integer32 UNITS "TQ (16nsec)" MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only value that reports the -on time- for a grant burst in increments of Time Quanta (TQ) 16ns as defined in [802.3ah] 60,64. The value returned shall be (on time ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. This attribute is relevant for an OLT and an ONU." REFERENCE "[802.3ah], 64.3.5.1." ::= { dot3MpcpEntry 12 } dot3MpcpOffTime OBJECT-TYPE SYNTAX Integer32 UNITS "TQ (16nsec)" MAX-ACCESS read-only STATUS current DESCRIPTION Khermosh Expires March 21, 2005 [Page 19] Internet-Draft Managed Objects of EPON September 2004 "A read-only value that reports the -off time- for a grant burst in increments of Time Quanta (TQ) 16ns as defined in [802.3ah] 60,64. The value returned shall be (off time ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. This attribute is relevant for an OLT and an ONU." REFERENCE "[802.3ah], 64.3.5.1." ::= { dot3MpcpEntry 13 } dot3MpcpSyncTime OBJECT-TYPE SYNTAX Integer32 UNITS "TQ (16nsec)" MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only value that reports the -sync lock time- for an OLT receiver in increments of Time Quanta (TQ) 16ns as defined in [802.3ah] 60,64,65. The value returned shall be (sync lock time ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. This attribute is relevant for an OLT and an ONU." REFERENCE "[802.3ah], 64.3.3.2." ::= { dot3MpcpEntry 14 } dot3MpcpStatTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot3MpcpStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the list of statistics counters of [802.3ah] clause 64 MPCP interface." ::= { dot3MpcpObjects 2 } dot3MpcpStatEntry OBJECT-TYPE SYNTAX Dot3MpcpStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entries for table of statistics counters of [802.3ah] clause 64 MPCP interface." INDEX { ifIndex } ::= { dot3MpcpStatTable 1 } Dot3MpcpStatEntry ::= SEQUENCE { dot3MpcpMACCtrlFramesTransmitted Counter32, Khermosh Expires March 21, 2005 [Page 20] Internet-Draft Managed Objects of EPON September 2004 dot3MpcpMACCtrlFramesReceived Counter32, dot3MpcpDiscoveryWindowsSent Counter32, dot3MpcpDiscoveryTimeout Counter32, dot3MpcpTxRegRequest Counter32, dot3MpcpRxRegRequest Counter32, dot3MpcpTxRegAck Counter32, dot3MpcpRxRegAck Counter32, dot3MpcpTxReport Counter32, dot3MpcpRxReport Counter32, dot3MpcpTxGate Counter32, dot3MpcpRxGate Counter32, dot3MpcpTxRegister Counter32, dot3MpcpRxRegister Counter32, dot3MpcpRxNotSupportedMPCP Counter32 } dot3MpcpMACCtrlFramesTransmitted OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of MPCP frames passed to the MAC sublayer for transmission. This counter is incremented when a MA_CONTROL.request service primitive is generated within the MAC control sublayer with an opcode indicating a MPCP frame. This attribute is relevant for an OLT and an ONU." REFERENCE "[802.3ah], 30.3.5.1.7." ::= { dot3MpcpStatEntry 1 } dot3MpcpMACCtrlFramesReceived OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of MPCP frames passed by the MAC sublayer to the MAC Control sublayer. This counter is incremented when a ReceiveFrame function call returns a valid frame with: (1) a lengthOrType field value equal to the reserved Type for 802.3_MAC_Control as specified in 31.4.1.3, and (2) an opcode indicating a MPCP frame. This attribute is relevant for an OLT and an ONU." REFERENCE "[802.3ah], 30.3.5.1.8." ::= { dot3MpcpStatEntry 2} dot3MpcpDiscoveryWindowsSent OBJECT-TYPE Khermosh Expires March 21, 2005 [Page 21] Internet-Draft Managed Objects of EPON September 2004 SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of discovery windows generated. The counter is incremented by one for each generated discovery window. This attribute is relevant for an OLT and an ONU. At the ONU value should be zero." REFERENCE "[802.3ah], 30.3.5.1.22." ::= { dot3MpcpStatEntry 3} dot3MpcpDiscoveryTimeout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a discovery timeout occurs. Increment the counter by one for each discovery processing state-machine reset resulting from timeout waiting for message arrival. This attribute is relevant for an OLT and an ONU." REFERENCE "[802.3ah], 30.3.5.1.23." ::= { dot3MpcpStatEntry 4} dot3MpcpTxRegRequest OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a REGISTER_REQ MPCP frames transmission occurs. Increment the counter by one for each REGISTER_REQ MPCP frame transmitted as defined in [802.3ah] clause 64. This counter is mandatory for an ONU. This attribute is relevant for an OLT and an ONU. At the OLT value should be zero." REFERENCE "[802.3ah], 30.3.5.1.12." ::= { dot3MpcpStatEntry 5} dot3MpcpRxRegRequest OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a REGISTER_REQ MPCP frames reception occurs. A single counter at the ONU and Khermosh Expires March 21, 2005 [Page 22] Internet-Draft Managed Objects of EPON September 2004 a set of counters, one for each LLID, at the OLT. Increment the counter by one for each REGISTER_REQ MPCP frame received for each LLID as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and for an OLT. At the ONU value should be zero." REFERENCE "[802.3ah], 30.3.5.1.17." ::= { dot3MpcpStatEntry 6} dot3MpcpTxRegAck OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a REGISTER_ACK MPCP frames transmission occurs. Increment the counter by one for each REGISTER_ACK MPCP frame transmitted as defined in [802.3ah] clause 64. This counter is mandatory for an ONU. This attribute is relevant for an OLT and an ONU. At the OLT the value should be zero." REFERENCE "[802.3ah], 30.3.5.1.10." ::= { dot3MpcpStatEntry 7} dot3MpcpRxRegAck OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a REGISTER_ACK MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each REGISTER_ACK MPCP frame received for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and for an OLT. At the ONU the value should be zero." REFERENCE "[802.3ah], 30.3.5.1.15." ::= { dot3MpcpStatEntry 8} dot3MpcpTxReport OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a REPORT MPCP frames transmission occurs. Increment the counter by one for each REPORT MPCP frame transmitted as defined in Khermosh Expires March 21, 2005 [Page 23] Internet-Draft Managed Objects of EPON September 2004 [802.3ah] clause 64. This counter is mandatory for an ONU. This attribute is relevant for an OLT and an ONU. At the OLT value should be zero." REFERENCE "[802.3ah], 30.3.5.1.13." ::= { dot3MpcpStatEntry 9} dot3MpcpRxReport OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a REPORT MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each REPORT MPCP frame received for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and for an OLT. At the ONU value should be zero." REFERENCE "[802.3ah], 30.3.5.1.18." ::= { dot3MpcpStatEntry 10} dot3MpcpTxGate OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a GATE MPCP frames transmission occurs. A set of counters, one for each LLID, at the OLT. Increment the counter by one for each GATE MPCP frame transmitted, for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an OLT. This attribute is relevant for an OLT and an ONU. At the ONU the value should be zero." REFERENCE "[802.3ah], 30.3.5.1.9." ::= { dot3MpcpStatEntry 11} dot3MpcpRxGate OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a GATE MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID ,at the OLT. Increment the counter by one for each GATE MPCP frame received, Khermosh Expires March 21, 2005 [Page 24] Internet-Draft Managed Objects of EPON September 2004 for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and for an OLT. At the OLT the value should be zero." REFERENCE "[802.3ah], 30.3.5.1.14." ::= { dot3MpcpStatEntry 12} dot3MpcpTxRegister OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a REGISTER MPCP frames transmission occurs. A set of counters, one for each LLID, at the OLT. Increment the counter by one for each REGISTER MPCP frame transmitted, for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an OLT. This attribute is relevant for an OLT and an ONU. At the ONU the value should be zero." REFERENCE "[802.3ah], 30.3.5.1.11." ::= { dot3MpcpStatEntry 13} dot3MpcpRxRegister OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a REGISTER MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each REGISTER MPCP frame received, for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and for an OLT. at the OLT the value should be zero." REFERENCE "[802.3ah], 30.3.5.1.16." ::= { dot3MpcpStatEntry 14} dot3MpcpRxNotSupportedMPCP OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a non-supported MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each non-supported MPCP Khermosh Expires March 21, 2005 [Page 25] Internet-Draft Managed Objects of EPON September 2004 frame received, for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and for an OLT." ::= { dot3MpcpStatEntry 15} -- Conformance Statements -- Conformance Groups dot3MpcpGroups OBJECT IDENTIFIER ::= { dot3MpcpConformance 1 } dot3MpcpGroupBase OBJECT-GROUP OBJECTS { dot3MpcpID, dot3MpcpOperStatus, dot3MpcpMode, dot3MpcpLinkID, dot3MpcpRemoteMACAddress, dot3MpcpRegistrationState, dot3MpcpMaximumPendingGrants, dot3MpcpAdminState } STATUS current DESCRIPTION "A collection of objects of dot3 Mpcp Basic entity state definition." ::= { dot3MpcpGroups 1 } dot3MpcpGroupParam OBJECT-GROUP OBJECTS { dot3MpcpTransmitElapsed, dot3MpcpReceiveElapsed, dot3MpcpRoundTripTime, dot3MpcpOnTime, dot3MpcpOffTime, dot3MpcpSyncTime } STATUS current DESCRIPTION "A collection of objects of dot3 Mpcp for P2MP parameters." ::= { dot3MpcpGroups 2 } dot3MpcpGroupStat OBJECT-GROUP OBJECTS { Khermosh Expires March 21, 2005 [Page 26] Internet-Draft Managed Objects of EPON September 2004 dot3MpcpMACCtrlFramesTransmitted, dot3MpcpMACCtrlFramesReceived, dot3MpcpDiscoveryWindowsSent, dot3MpcpDiscoveryTimeout , dot3MpcpTxRegRequest, dot3MpcpRxRegRequest, dot3MpcpTxRegAck, dot3MpcpRxRegAck, dot3MpcpTxReport, dot3MpcpRxReport, dot3MpcpTxGate, dot3MpcpRxGate, dot3MpcpTxRegister, dot3MpcpRxRegister, dot3MpcpRxNotSupportedMPCP } STATUS current DESCRIPTION "A collection of objects of dot3 Mpcp Statistics" ::= { dot3MpcpGroups 3 } -- Compliance dot3MpcpCompliances OBJECT IDENTIFIER ::= { dot3MpcpConformance 2 } dot3MPCPCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Multi-point control protocol interfaces." MODULE -- this module MANDATORY-GROUPS { dot3MpcpGroupBase} GROUP dot3MpcpGroupParam DESCRIPTION "This group is mandatory for all MPCP supporting interfaces for configuration of the Multipoint Parameters." GROUP dot3MpcpGroupStat DESCRIPTION "This group is mandatory for all MPCP supporting interfaces for Statistics collection." ::= { dot3MpcpCompliances 1} -- Editor-s note: OMPEmulation managed object definitions Khermosh Expires March 21, 2005 [Page 27] Internet-Draft Managed Objects of EPON September 2004 dot3OmpEmulationMIB OBJECT IDENTIFIER ::= { dot3EfmeponMIB 2} dot3OmpEmulationObjects OBJECT IDENTIFIER ::={dot3OmpEmulationMIB 1} dot3OmpeConformance OBJECT IDENTIFIER ::= { dot3OmpEmulationMIB 2 } dot3OmpEmulationTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot3OmpEmulationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for dot3 OmpEmulation MIB modules." ::= { dot3OmpEmulationObjects 1 } dot3OmpEmulationEntry OBJECT-TYPE SYNTAX Dot3OmpEmulationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the dot3 OmpEmulation MIB modules table." INDEX { ifIndex } ::= { dot3OmpEmulationTable 1 } Dot3OmpEmulationEntry ::= SEQUENCE { dot3OmpEmulationID Integer32, dot3OmpEmulationType INTEGER } dot3OmpEmulationID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of dot3OmpEmulationID is assigned so as to uniquely identify a OMPEmulation entity among the subordinate managed objects of the containing object. The value is mandated for an ONU." REFERENCE "[802.3ah], 30.3.7.1.1." ::= { dot3OmpEmulationEntry 1} dot3OmpEmulationType OBJECT-TYPE SYNTAX INTEGER { unknown(1), olt(2), onu(3) } Khermosh Expires March 21, 2005 [Page 28] Internet-Draft Managed Objects of EPON September 2004 MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only value that indicates that mode of operation of the Reconciliation Sublayer for Point to Point Emulation (see [802.3ah] clause 65.1). unknown(1) value is assigned in initializing, true state or type not yet known. olt(2) value is assigned when Sublayer operating in OLT mode. onu(3) value is assigned when Sublayer operating in ONU mode." REFERENCE "[802.3ah], 30.3.7.1.2." ::= { dot3OmpEmulationEntry 2} dot3OmpEmulationStatTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot3OmpEmulationStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the list of statistics counters of [802.3ah] clause 65 OMP interface." ::= { dot3OmpEmulationObjects 2} dot3OmpEmulationStatEntry OBJECT-TYPE SYNTAX Dot3OmpEmulationStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entries for Table of statistics counters of [802.3ah] clause 65 OMP interface." INDEX { ifIndex } ::= { dot3OmpEmulationStatTable 1 } Dot3OmpEmulationStatEntry::= SEQUENCE { dot3OmpEmulationSLDErrors Counter32, dot3OmpEmulationCRC8Errors Counter32, dot3OmpEmulationBadLLID Counter32, dot3OmpEmulationGoodLLID Counter32, dot3OmpEmulationOnuPonCastLLID Counter32, dot3OmpEmulationOltPonCastLLID Counter32, dot3OmpEmulationBroadcastLLIDNotOnuID Counter32, dot3OmpEmulationOnuLLIDNotBroadcast Counter32, dot3OmpEmulationBroadcastLLIDPlusOnuId Counter32, dot3OmpEmulationNotBroadcastLLIDNotOnuId Counter32 } dot3OmpEmulationSLDErrors OBJECT-TYPE SYNTAX Counter32 Khermosh Expires March 21, 2005 [Page 29] Internet-Draft Managed Objects of EPON September 2004 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received that do not contain a valid SLD field as defined in [802.3ah] clause 65.1.3.3.1. This attribute is mandatory for an OLT and optional for an ONU." REFERENCE "[802.3ah], 30.3.7.1.3." ::= { dot3OmpEmulationStatEntry 1} dot3OmpEmulationCRC8Errors OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received that contain a valid SLD field, as defined in [802.3ah] clause 65.1.3.3.1, but do not pass the CRC-8 check as defined in [802.3ah] clause 65.1.3.3.3. This attribute is mandatory for an OLT and for an ONU." REFERENCE "[802.3ah], 30.3.7.1.4." ::= { dot3OmpEmulationStatEntry 2} dot3OmpEmulationBadLLID OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received that contain a valid SLD field, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause 65.1.3.3.3, but are discarded due to the LLID check as defined in [802.3ah] clause 65.1.3.3.2. This attribute is relevant for an OLT and an ONU." REFERENCE "[802.3ah], 30.3.7.1.8." ::= { dot3OmpEmulationStatEntry 3} dot3OmpEmulationGoodLLID OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received that contain a valid SLD Khermosh Expires March 21, 2005 [Page 30] Internet-Draft Managed Objects of EPON September 2004 field, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause 65.1.3.3.3. This attribute is relevant for an OLT and an ONU." REFERENCE "[802.3ah], 30.3.7.1.5." ::= { dot3OmpEmulationStatEntry 4} dot3OmpEmulationOnuPonCastLLID OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received that contain a valid SLD field in an ONU, as defined in [802.3ah] 65.1.3.3.1, passes the CRC-8 check, as defined in [802.3ah] 65.1.3.3.3, and the frame meets the rule for acceptance defined in [802.3ah] 65.1.3.3.2." REFERENCE "[802.3ah], 30.3.7.1.6." ::= { dot3OmpEmulationStatEntry 5} dot3OmpEmulationOltPonCastLLID OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received that contain a valid SLD field in an OLT, as defined in [802.3ah] 65.1.3.3.1, passes the CRC-8 check, as defined in [802.3ah] 65.1.3.3.3, and the frame meets the rule for acceptance defined in [802.3ah] 65.1.3.3.2." REFERENCE "[802.3ah], 30.3.7.1.7." ::= { dot3OmpEmulationStatEntry 6} dot3OmpEmulationBroadcastLLIDNotOnuID OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received that contain a valid SLD field in a OLT, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause 65.1.3.3.3, and contain broadcast LLID as defined in [802.3ah] clause 65. This attribute is mandatory for an OLT and for an ONU." Khermosh Expires March 21, 2005 [Page 31] Internet-Draft Managed Objects of EPON September 2004 ::= { dot3OmpEmulationStatEntry 7} dot3OmpEmulationOnuLLIDNotBroadcast OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received that contain a valid SLD field in a OLT, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause 65.1.3.3.3, and contain the ONU's LLID as defined in [802.3ah] clause 65. This attribute is mandatory for an ONU and mandatory for an OLT (a counter per LLID)." ::= { dot3OmpEmulationStatEntry 8} dot3OmpEmulationBroadcastLLIDPlusOnuId OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received that contain a valid SLD field in a OLT, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause 65.1.3.3.3, and contain the broadcast LLID plus ONU's LLID (frame reflected) as defined in [802.3ah] clause 65. This attribute is mandatory for an ONU and mandatory for an OLT (a counter per LLID)." ::= { dot3OmpEmulationStatEntry 9} dot3OmpEmulationNotBroadcastLLIDNotOnuId OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received that contain a valid SLD field in a OLT, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause 65.1.3.3.3, and does not contain the ONU's LLID as defined in [802.3ah] clause 65. This attribute is mandatory for an ONU" ::= { dot3OmpEmulationStatEntry 10} Khermosh Expires March 21, 2005 [Page 32] Internet-Draft Managed Objects of EPON September 2004 -- Conformance Statements -- Conformance Groups dot3OmpeGroups OBJECT IDENTIFIER ::={ dot3OmpeConformance 1} dot3OmpeGroupID OBJECT-GROUP OBJECTS { dot3OmpEmulationID, dot3OmpEmulationType } STATUS current DESCRIPTION "A collection of objects of dot3 OMP emulation ID entity state definition." ::= { dot3OmpeGroups 1 } dot3OmpeGroupStat OBJECT-GROUP OBJECTS { dot3OmpEmulationSLDErrors, dot3OmpEmulationCRC8Errors, dot3OmpEmulationBadLLID, dot3OmpEmulationGoodLLID, dot3OmpEmulationOnuPonCastLLID, dot3OmpEmulationOltPonCastLLID, dot3OmpEmulationBroadcastLLIDNotOnuID, dot3OmpEmulationOnuLLIDNotBroadcast, dot3OmpEmulationBroadcastLLIDPlusOnuId, dot3OmpEmulationNotBroadcastLLIDNotOnuId } STATUS current DESCRIPTION "A collection of objects of dot3 OMP emulation Statistics" ::= { dot3OmpeGroups 2 } -- Compliance dot3OmpeCompliances OBJECT IDENTIFIER ::= { dot3OmpeConformance 2 } dot3OmpeCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for OMPEmulation interfaces." Khermosh Expires March 21, 2005 [Page 33] Internet-Draft Managed Objects of EPON September 2004 MODULE -- this module MANDATORY-GROUPS { dot3OmpeGroupID} GROUP dot3OmpeGroupStat DESCRIPTION "This group is mandatory for all OMPemulation supporting interfaces for Statistics collection." ::= { dot3OmpeCompliances 1} -- Editor-s note: MAU managed object definitions (30.5.1) dot3EponMauMIB OBJECT IDENTIFIER ::= { dot3EfmeponMIB 3} dot3EponMauObjects OBJECT IDENTIFIER ::= { dot3EponMauMIB 1} dot3EponMauConformance OBJECT IDENTIFIER ::= { dot3EponMauMIB 2 } dot3EponMauTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot3EponMauEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for dot3 MAU EPON MIB modules." ::= { dot3EponMauObjects 1 } dot3EponMauEntry OBJECT-TYPE SYNTAX Dot3EponMauEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the dot3 MAU EPON MIB modules table." INDEX { ifIndex } ::= { dot3EponMauTable 1 } Dot3EponMauEntry ::= SEQUENCE { dot3EponMauPCSCodingViolation Counter32, dot3EponMauFecAbility INTEGER, dot3EponMauFecMode INTEGER, dot3EponMauFECCorrectedBlocks Counter32, dot3EponMauFECUncorrectableBlocks Counter32, dot3EponMauBufferHeadCodingViolation Counter32 } Khermosh Expires March 21, 2005 [Page 34] Internet-Draft Managed Objects of EPON September 2004 dot3EponMauPCSCodingViolation OBJECT-TYPE SYNTAX Counter32 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "For 100 Mb/ s operation it is a count of the number of times an invalid code-group is received, other than the /H/ code-group. For 1000 Mb/ s operation it is a count of the number of times an invalid codegroup is received, other than the /V/ code-group." REFERENCE "[802.3ah], 30.5.1.1.12." ::= { dot3EponMauEntry 1} dot3EponMauFecAbility OBJECT-TYPE SYNTAX INTEGER { unknown (1), nonsupported (2), supported (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only value that indicates the support of operation of the 1000BASE-PX PHY optional FEC Sublayer for Forward error correction see [802.3ah] clause 65.2). unknown(1) value is assigned in initializing, for non FEC support state or type not yet known. nonsupported(2) value is assigned when Sublayer is not support. supported(3) value is assigned when Sublayer is supported." REFERENCE "[802.3ah], 30.5.1.1.13." ::= { dot3EponMauEntry 2} dot3EponMauFecMode OBJECT-TYPE SYNTAX INTEGER { unknown (1), disabled (2), enabled (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "A read-write value that indicates the mode of operation of the 1000BASE-PX PHY optional FEC Sublayer for Forward error correction see [802.3ah] clause 65.2). A GET operation returns the current mode of operation the PHY. A SET operation changes the mode of operation Khermosh Expires March 21, 2005 [Page 35] Internet-Draft Managed Objects of EPON September 2004 of the PHY to the indicated value. unknown(1) value is assigned in initializing, for non FEC support state or type not yet known. disabled(2) value is assigned when Sublayer operating in disabled mode. enabled(3) value is assigned when Sublayer operating in FEC mode. writing can be done all the time." REFERENCE "[802.3ah], 30.5.1.1.14." DEFVAL { 1 } ::= { dot3EponMauEntry 3} dot3EponMauFECCorrectedBlocks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs, a count of corrected FEC blocks. This counter will not increment for other PHY Types. Increment the counter by one for each received block that is corrected by the FEC function in the PHY." REFERENCE "[802.3ah], 30.5.1.1.15." ::= { dot3EponMauEntry 4} dot3EponMauFECUncorrectableBlocks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs, a count of uncorrectable FEC blocks. This counter will not increment for other PHY Types. Increment the counter by one for each FEC block that is determined to be uncorrectable by the FEC function in the PHY." REFERENCE "[802.3ah], 30.5.1.1.16." ::= { dot3EponMauEntry 5} dot3EponMauBufferHeadCodingViolation OBJECT-TYPE SYNTAX Counter32 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "For 1000 Mbps operation it is a counts of the number of invalid code-group received directly from the link." ::= { dot3EponMauEntry 6} Khermosh Expires March 21, 2005 [Page 36] Internet-Draft Managed Objects of EPON September 2004 -- Defining EPON MAU types -- Editor's Note: This section should be added to 802.3 MAU MIB -- module RFC. Preference would be that the MAU MIB module -- structure would change so that it is re-written as an -- IANA-maintained module. dot3EponMauType OBJECT IDENTIFIER ::= { dot3EponMauMIB 3 } eponMauType1000BasePXOLT OBJECT-IDENTITY STATUS current DESCRIPTION "Multipoint MAC Control (per 802.3 section 64,65) OLT (master), unknown PMD" REFERENCE "[802.3ah], 30.5.1.1.2." ::= { dot3EponMauType 1 } eponMauType1000BasePXONU OBJECT-IDENTITY STATUS current DESCRIPTION "Multipoint MAC Control (per 802.3 section 64,65),ONU (slave), unknown PMD" REFERENCE "[802.3ah], 30.5.1.1.2." ::= { dot3EponMauType 2 } eponMauType1000BasePX10DOLT OBJECT-IDENTITY STATUS current DESCRIPTION "EPON over 10K link, downlink (per 802.3 section 60), OLT side" REFERENCE "[802.3ah], 30.5.1.1.2." ::= { dot3EponMauType 3 } eponMauType1000BasePX10DONU OBJECT-IDENTITY STATUS current DESCRIPTION "EPON over 10K link, downlink (per 802.3 section 60), ONU side" REFERENCE "[802.3ah], 30.5.1.1.2." ::= { dot3EponMauType 4 } eponMauType1000BasePX10UOLT OBJECT-IDENTITY STATUS current DESCRIPTION "EPON over 10K link, uplink (per 802.3 section 60), OLT side" REFERENCE "[802.3ah], 30.5.1.1.2." ::= { dot3EponMauType 5 } eponMauType1000BasePX10UONU OBJECT-IDENTITY STATUS current DESCRIPTION "EPON over 10K link, uplink (per 802.3 section 60), ONU side" REFERENCE "[802.3ah], 30.5.1.1.2." Khermosh Expires March 21, 2005 [Page 37] Internet-Draft Managed Objects of EPON September 2004 ::= { dot3EponMauType 6 } eponMauType1000BasePX20DOLT OBJECT-IDENTITY STATUS current DESCRIPTION "EPON over 20K link, downlink (per 802.3 section 60), OLT side" REFERENCE "[802.3ah], 30.5.1.1.2." ::= { dot3EponMauType 7 } eponMauType1000BasePX20DONU OBJECT-IDENTITY STATUS current DESCRIPTION "EPON over 20K link, downlink (per 802.3 section 60), ONU side" REFERENCE "[802.3ah], 30.5.1.1.2." ::= { dot3EponMauType 8 } eponMauType1000BasePX20UOLT OBJECT-IDENTITY STATUS current DESCRIPTION "EPON over 20K link, uplink (per 802.3 section 60), OLT side" REFERENCE "[802.3ah], 30.5.1.1.2." ::= { dot3EponMauType 9 } eponMauType1000BasePX20UONU OBJECT-IDENTITY STATUS current DESCRIPTION "EPON over 20K link, uplink (per 802.3 section 60), ONU side" REFERENCE "[802.3ah], 30.5.1.1.2." ::= { dot3EponMauType 10 } -- Conformance Statements -- Conformance Groups dot3EponMauGroups OBJECT IDENTIFIER ::={ dot3EponMauConformance 1} dot3EponMauGroupAll OBJECT-GROUP OBJECTS { dot3EponMauPCSCodingViolation } STATUS current DESCRIPTION "A collection of objects of dot3 MAU definition." ::= { dot3EponMauGroups 1 } dot3EponMauGroupFEC OBJECT-GROUP Khermosh Expires March 21, 2005 [Page 38] Internet-Draft Managed Objects of EPON September 2004 OBJECTS { dot3EponMauFecAbility, dot3EponMauFecMode, dot3EponMauFECCorrectedBlocks, dot3EponMauFECUncorrectableBlocks, dot3EponMauBufferHeadCodingViolation } STATUS current DESCRIPTION "A collection of objects of FEC group definition." ::= { dot3EponMauGroups 2 } -- Compliance dot3EponMauCompliances OBJECT IDENTIFIER::={dot3EponMauConformance 2} dot3EponMauCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for MAU EPON interfaces." MODULE -- this module MANDATORY-GROUPS { dot3EponMauGroupAll } GROUP dot3EponMauGroupFEC DESCRIPTION "This group is mandatory for all EPON MAU devices Supporting FEC functionality as for Definitions and BER Statistics collection." ::= { dot3EponMauCompliances 1} END Khermosh Expires March 21, 2005 [Page 39] Internet-Draft Managed Objects of EPON September 2004 9. Definitions - The EPON Device MIB EPON-DEVICE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, mib-2, OBJECT-TYPE, Counter32, Unsigned32, Integer32, zeroDotZero FROM SNMPv2-SMI TruthValue, DateAndTime, RowStatus, MacAddress FROM SNMPv2-TC ifIndex FROM IF-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB ; eponDeviceMIB MODULE-IDENTITY LAST-UPDATED "200409210000Z" -- September 21, 2004 ORGANIZATION "IETF Ethernet Interfaces and Hub MIB Working Group" CONTACT-INFO "WG charter: http://www.ietf.org/html.charters/hubmib-charter.html Mailing Lists: General Discussion: hubmib@ietf.org To Subscribe: hubmib-request@ietf.org In Body: subscribe your_email_address Chair: Dan Romascanu Postal: Avaya Inc. Atidim Technology Park, Bldg. 3 Tel Aviv 61131 Israel Tel: +972-3-645-8414 E-mail: dromasca@avaya.com Editor: Lior Khermosh Postal: Passave Technologies Inc. Ackerstein Towers, Tower A, 6th floor, 9 Hamenofim St. Hertzliya Pituach 46725, ISRAEL Khermosh Expires March 21, 2005 [Page 40] Internet-Draft Managed Objects of EPON September 2004 P.O.Box 2089 Hertzliya Pituach 46120 Israel Tel: +972-9-9717600 Ext: 7181 E-mail: lior.khermosh@passave.com" DESCRIPTION "The objects in this MIB module are used to manage Ethernet Passive Optical Network (EPON) devices which are based on the Ethernet in the First Mile (EFM) PON as defined in IEEE Draft P802.3ah/D3.0 clause 60,64,65. The following reference is used throughout this MIB module: [802.3ah] refers to: IEEE Draft P802.3ah/D3.3: 'Draft amendment to - Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - Media Access Control Parameters, Physical Layers and Management Parameters for subscriber access networks', 22 April 2004. Of particular interest are Clause 64(MPCP) 65(P2mP RS) and 60 (PON PMDs). Clause 30, 'Management', and Clause 45,'Management Data Input/Output (MDIO) Interface'. Copyright (C) The Internet Society (2004). This version of this MIB module is part of XXXX see the RFC itself for full legal notices." -- Editor's Note: Replace XXXX with the actual RFC number -- assigned by RFC Editor and remove this note REVISION "200409210000Z" -- September 21, 2004 DESCRIPTION "Initial version, published as RFC XXXX." ::= { mib-2 XXX } -- Editor's Note: Replace XXX with a real OID once it is -- assigned by IANA and remove this note. eponDeviceObjectMIB OBJECT IDENTIFIER ::= { eponDeviceMIB 1} eponDeviceObjects OBJECT IDENTIFIER ::= { eponDeviceObjectMIB 1} eponDeviceConformance OBJECT IDENTIFIER ::= { eponDeviceObjectMIB 2} eponDeviceControlObjects OBJECT IDENTIFIER ::= { eponDeviceObjects 1} Khermosh Expires March 21, 2005 [Page 41] Internet-Draft Managed Objects of EPON September 2004 eponDeviceStatObjects OBJECT IDENTIFIER ::= { eponDeviceObjects 2} eponDeviceEventObjects OBJECT IDENTIFIER ::= { eponDeviceObjects 3} eponDeviceControlTable OBJECT-TYPE SYNTAX SEQUENCE OF EponDeviceControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for EPON device MIB modules." ::= { eponDeviceControlObjects 1 } eponDeviceControlEntry OBJECT-TYPE SYNTAX EponDeviceControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the EPON device Control table." INDEX { ifIndex } ::= { eponDeviceControlTable 1 } EponDeviceControlEntry ::= SEQUENCE { eponDeviceObjectReset INTEGER, eponDeviceObjectModes INTEGER, eponDeviceObjectFecEnabled INTEGER, eponDeviceObjectOamMode INTEGER, eponDeviceObjectDeviceReadyMode INTEGER, eponDeviceObjectPowerDown TruthValue, eponDeviceObjectNumberOfLLIDs Integer32, eponDeviceObjectReportThreshold Integer32, eponDeviceRemoteMACAddressLLIDControl INTEGER } eponDeviceObjectReset OBJECT-TYPE SYNTAX INTEGER { running(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to reset the EPON device. The interface may be unavailable while the reset occurs and data may be lost. During reading operation it returns the state of the EPON device. running(1) indicates and Khermosh Expires March 21, 2005 [Page 42] Internet-Draft Managed Objects of EPON September 2004 operates normal operation, reset(2) indicates and operates reset mode. Writing can be done all the time." DEFVAL { 1 } ::= { eponDeviceControlEntry 1 } eponDeviceObjectModes OBJECT-TYPE SYNTAX INTEGER { olt(1), onu(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable defines the mode of the EPON device. When an olt(1) it is an Optical Line Terminal device (server) and when an onu(2) and Optical Network Unit device (client)" ::= { eponDeviceControlEntry 2 } eponDeviceObjectFecEnabled OBJECT-TYPE SYNTAX INTEGER { noFecEnabled (1), fecTxEnabled (2), fecRxEnabled (3), fecTxRxEnabled (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable defines and provides information whether the EPON device uses FEC as defined in the [802.3ah] clause 65.2 for EPON. When noFECEnabled(1) the device does not support FEC mode When fecTxEnabled(2) the device supports the FEC transmission mode. When fecRxEnabled(3) the device supports the FEC Receive mode. When fecTxRxEnabled(4) the device supports the FEC transmission and receive mode. Writing can be done all the time. This attribute is relevant for an OLT and an ONU." DEFVAL { 1 } ::= { eponDeviceControlEntry 4 } eponDeviceObjectOamMode OBJECT-TYPE SYNTAX INTEGER { noOam (1), oamServer (2), oamclient (3) } MAX-ACCESS read-write Khermosh Expires March 21, 2005 [Page 43] Internet-Draft Managed Objects of EPON September 2004 STATUS current DESCRIPTION "This variable defines and provides information on the Operation Administration and Maintenance (OAM) mode of an EPON device as defined by the [802.3ah] clause 57. When noOam(1) the device does not supports the OAM mode. When oamServer(2) the device supports the OAM mode as a server unit. When oamClient(3) the device supports the OAM mode as a client unit. Writing can be done during initialization, eponDeviceObjectDeviceReadyMode is in notReady(1) or inProcess(2). This attribute is relevant for an OLT and an ONU." DEFVAL { 1 } ::= { eponDeviceControlEntry 5 } eponDeviceObjectDeviceReadyMode OBJECT-TYPE SYNTAX INTEGER { notReady (1), inProcess (2), ready (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable defines the mode of an EPON device and provides information on the mode in initialization - ready for registration as defined by the [802.3ah] clause 64. When notReady(1) the device is not ready for operation. When inProcess(2) the device is in initialization process. When ready(3) the device is ready for registration. Writing can be done all the time. This attribute is relevant for an OLT and an ONU." DEFVAL { 1 } ::= { eponDeviceControlEntry 6 } eponDeviceObjectPowerDown OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this variable to True(1) will cause Device to be entered into Power down mode where no registration is allowed and only receiving data from the link. Writing can be done all the time. Khermosh Expires March 21, 2005 [Page 44] Internet-Draft Managed Objects of EPON September 2004 This attribute is relevant for an OLT and an ONU." DEFVAL { false } ::= { eponDeviceControlEntry 7 } eponDeviceObjectNumberOfLLIDs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A read only variable which defines the number of registered LLIDs (as defined by the [802.3ah] clause 65) in a EPON network for an OLT and an ONU. Initialization value is 0. This attribute is relevant for an OLT and an ONU." ::= { eponDeviceControlEntry 8 } eponDeviceObjectReportThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "TQ (16nsec)" MAX-ACCESS read-write STATUS current DESCRIPTION "A set of 8 integers, for each LLID, that defines the threshold reporting for each Queue in the REPORT message, as defined in [802.3ah] 64. First Queue set reporting will provide information on the queue occupancy of frames below this Threshold. The value returned shall be in Time quanta (TQ) which is 16nsec or 2 octets increments. Writing can be done all the time. This attribute is relevant for an OLT and an ONU." DEFVAL { 0 } ::= { eponDeviceControlEntry 9 } eponDeviceRemoteMACAddressLLIDControl OBJECT-TYPE SYNTAX INTEGER { none(1), resetLog(2), useDefaultReporting(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates and controls the resetting of the LLID MAC address log. Setting this object to none(1) has no action resetLog(2) empties the LLID MAC address log. All data is deleted. Setting it to useDefaultReporting(3) Khermosh Expires March 21, 2005 [Page 45] Internet-Draft Managed Objects of EPON September 2004 returns all entries priorities to their factory-default reporting. Reading this object always returns useDefaultReporting(3)." DEFVAL { 3 } ::= { eponDeviceControlEntry 10 } eponDeviceRemoteMACAddressLLIDTable OBJECT-TYPE SYNTAX SEQUENCE OF EponDeviceRemoteMACAddressLLIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of read-only value that identifies the source_address and LLIDs parameter of the remote devices in the network. This MacAddress value, as defined in [802.3ah], 30.3.5.1.5, is updated on reception of a valid frame with a unicast destination Field or (1) a destination Field equal to the reserved multicast address for MAC Control specified in [802.3ah] Annex 31A, (2) lengthOrType field value equal to the reserved Type for MAC Control as specified in [802.3ah] Annex 31A. (3)an MPCP subtype value equal to the subtype reserved for MPCP as specified in [802.3ah] Annex 31A, and an LLID as allocated by the OLT. The table is defined as Remote MAC address - LLID (RMadL) The table is relevant only for an OLT device, and is equivalent from a bridge emulation to the bridge port-MAC address table where the LLIDs are equivalent to virtual bridge ports." ::= { eponDeviceControlObjects 2 } eponDeviceRemoteMACAddressLLIDEntry OBJECT-TYPE SYNTAX EponDeviceRemoteMACAddressLLIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A group of entries. Applications create and delete entries using eponDeviceRMadlEntryStatus. When adding objects to an LLID they are added in the persistent order of their index in this table." INDEX {ifIndex } ::= { eponDeviceRemoteMACAddressLLIDTable 1 } EponDeviceRemoteMACAddressLLIDEntry ::= SEQUENCE { eponDeviceRemoteMACAddressLLIDName SnmpAdminString, eponDeviceRMadlLLID Unsigned32, eponDeviceRMadlLogID OBJECT IDENTIFIER, Khermosh Expires March 21, 2005 [Page 46] Internet-Draft Managed Objects of EPON September 2004 eponDeviceRMadlRemoteAddress MacAddress, eponDeviceRMadlType INTEGER, eponDeviceRMadlAction INTEGER, eponDeviceRMadlEntryStatus RowStatus } eponDeviceRemoteMACAddressLLIDName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A locally-unique, administratively assigned name for a group of entries." ::= { eponDeviceRemoteMACAddressLLIDEntry 1 } eponDeviceRMadlLLID OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "An arbitrary integer for the purpose of identifying the LLID. Writing can be done all the time." DEFVAL { 1 } ::= { eponDeviceRemoteMACAddressLLIDEntry 2 } eponDeviceRMadlLogID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-create STATUS current DESCRIPTION "The object identifier of a MIB module object to add to an entry, indicating the entry ID in the table. Writing can be done all the time." DEFVAL { zeroDotZero } ::= { eponDeviceRemoteMACAddressLLIDEntry 3 } eponDeviceRMadlRemoteAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The remote MAC address of the LLID. Writing can be done all the time." ::= { eponDeviceRemoteMACAddressLLIDEntry 4 } eponDeviceRMadlType OBJECT-TYPE Khermosh Expires March 21, 2005 [Page 47] Internet-Draft Managed Objects of EPON September 2004 SYNTAX INTEGER { notRegister (1), registered (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "A list of types for entries - LLIDs. Indicates and defines the state of registration. notRegister(1) marks a non registered LID, registered(2) marks a registered LLID. Writing can be done all the time." DEFVAL { 1 } ::= { eponDeviceRemoteMACAddressLLIDEntry 5 } eponDeviceRMadlAction OBJECT-TYPE SYNTAX INTEGER { none (1), register (2), deregister (3), reregister (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "A list of actions for an entry - LLID. Indicates and defines the state of registration for the remote device. none(1) marks no action, register(2) marks to register an LLID, deregister(3) marks to deregister an LLID, reregister(4) marks reregistered LLID. Writing can be done all the time." DEFVAL { 1 } ::= { eponDeviceRemoteMACAddressLLIDEntry 6 } eponDeviceRMadlEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The control that allows creation and deletion of entries. Once made active an entry MAY not be modified except to delete it." ::= { eponDeviceRemoteMACAddressLLIDEntry 7 } --Statistics tables Khermosh Expires March 21, 2005 [Page 48] Internet-Draft Managed Objects of EPON September 2004 eponDeviceStatTable OBJECT-TYPE SYNTAX SEQUENCE OF EponDeviceStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the list of statistics counters of EPON devices. The attributes are relevant for an OLT and an ONU." ::= { eponDeviceStatObjects 1} eponDeviceStatEntry OBJECT-TYPE SYNTAX EponDeviceStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entries for Table of statistics counters of EPON devices." INDEX { ifIndex } ::= { eponDeviceStatTable 1 } EponDeviceStatEntry::= SEQUENCE { eponDeviceStatTxFramesQueue0 Counter32, eponDeviceStatTxFramesQueue1 Counter32, eponDeviceStatTxFramesQueue2 Counter32, eponDeviceStatTxFramesQueue3 Counter32, eponDeviceStatTxFramesQueue4 Counter32, eponDeviceStatTxFramesQueue5 Counter32, eponDeviceStatTxFramesQueue6 Counter32, eponDeviceStatTxFramesQueue7 Counter32, eponDeviceStatRxFramesQueue0 Counter32, eponDeviceStatRxFramesQueue1 Counter32, eponDeviceStatRxFramesQueue2 Counter32, eponDeviceStatRxFramesQueue3 Counter32, eponDeviceStatRxFramesQueue4 Counter32, eponDeviceStatRxFramesQueue5 Counter32, eponDeviceStatRxFramesQueue6 Counter32, eponDeviceStatRxFramesQueue7 Counter32, eponDeviceStatDroppedFramesQueue0 Counter32, eponDeviceStatDroppedFramesQueue1 Counter32, eponDeviceStatDroppedFramesQueue2 Counter32, eponDeviceStatDroppedFramesQueue3 Counter32, eponDeviceStatDroppedFramesQueue4 Counter32, eponDeviceStatDroppedFramesQueue5 Counter32, eponDeviceStatDroppedFramesQueue6 Counter32, eponDeviceStatDroppedFramesQueue7 Counter32 } Khermosh Expires March 21, 2005 [Page 49] Internet-Draft Managed Objects of EPON September 2004 eponDeviceStatTxFramesQueue0 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-0- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-0-. The -Queue-0- marking matched the REPORT MPCP message Queue-0 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU." ::= { eponDeviceStatEntry 1} eponDeviceStatTxFramesQueue1 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-1- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-1-. The -Queue-1- marking matched the REPORT MPCP message Queue-1 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU." ::= { eponDeviceStatEntry 2} eponDeviceStatTxFramesQueue2 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-2- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-2-. The -Queue-2- marking matched the REPORT MPCP message Queue-2 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU." ::= { eponDeviceStatEntry 3} eponDeviceStatTxFramesQueue3 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION Khermosh Expires March 21, 2005 [Page 50] Internet-Draft Managed Objects of EPON September 2004 "A count of the number of times a -Queue-3- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-3-. The -Queue-3- marking matched the REPORT MPCP message Queue-3 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU." ::= { eponDeviceStatEntry 4} eponDeviceStatTxFramesQueue4 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-4- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-4-. The -Queue-4- marking matched the REPORT MPCP message Queue-4 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU." ::= { eponDeviceStatEntry 5} eponDeviceStatTxFramesQueue5 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-5- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-5-. The -Queue-5- marking matched the REPORT MPCP message Queue-5 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU." ::= { eponDeviceStatEntry 6} eponDeviceStatTxFramesQueue6 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-6- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-6-. The -Queue-6- marking matched the REPORT MPCP message Queue-6 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU." Khermosh Expires March 21, 2005 [Page 51] Internet-Draft Managed Objects of EPON September 2004 ::= { eponDeviceStatEntry 7} eponDeviceStatTxFramesQueue7 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-7- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-7-. The -Queue-7- marking matched the REPORT MPCP message Queue-7 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU." ::= { eponDeviceStatEntry 8} eponDeviceStatRxFramesQueue0 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-0- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-0-. The -Queue-0- marking matched the REPORT MPCP message Queue-0 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT." ::= { eponDeviceStatEntry 9} eponDeviceStatRxFramesQueue1 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-1- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-1-. The -Queue-1- marking matched the REPORT MPCP message Queue-1 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT." ::= { eponDeviceStatEntry 10} Khermosh Expires March 21, 2005 [Page 52] Internet-Draft Managed Objects of EPON September 2004 eponDeviceStatRxFramesQueue2 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-2- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-2-. The -Queue-2- marking matched the REPORT MPCP message Queue-2 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT." ::= { eponDeviceStatEntry 11} eponDeviceStatRxFramesQueue3 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-3- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-3-. The -Queue-3- marking matched the REPORT MPCP message Queue-3 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT." ::= { eponDeviceStatEntry 12} eponDeviceStatRxFramesQueue4 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-4- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-4-. The -Queue-4- marking matched the REPORT MPCP message Queue-4 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT." ::= { eponDeviceStatEntry 13} Khermosh Expires March 21, 2005 [Page 53] Internet-Draft Managed Objects of EPON September 2004 eponDeviceStatRxFramesQueue5 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-5- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-5-. The -Queue-5- marking matched the REPORT MPCP message Queue-5 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT." ::= { eponDeviceStatEntry 14} eponDeviceStatRxFramesQueue6 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-6- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-6-. The -Queue-6- marking matched the REPORT MPCP message Queue-6 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT." ::= { eponDeviceStatEntry 15} eponDeviceStatRxFramesQueue7 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-7- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-7-. The -Queue-7- marking matched the REPORT MPCP message Queue-7 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT." ::= { eponDeviceStatEntry 16} Khermosh Expires March 21, 2005 [Page 54] Internet-Draft Managed Objects of EPON September 2004 eponDeviceStatDroppedFramesQueue0 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-0- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-0-. The -Queue-0- marking matched the REPORT MPCP message Queue-0 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU." ::= { eponDeviceStatEntry 17} eponDeviceStatDroppedFramesQueue1 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-1- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-1-. The -Queue-1- marking matched the REPORT MPCP message Queue-1 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU." ::= { eponDeviceStatEntry 18} eponDeviceStatDroppedFramesQueue2 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-2- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-2-. The -Queue-2- marking matched the REPORT MPCP message Queue-2 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU." ::= { eponDeviceStatEntry 19} eponDeviceStatDroppedFramesQueue3 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION Khermosh Expires March 21, 2005 [Page 55] Internet-Draft Managed Objects of EPON September 2004 "A count of the number of times a -Queue-3- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-3-. The -Queue-3- marking matched the REPORT MPCP message Queue-3 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU." ::= { eponDeviceStatEntry 20} eponDeviceStatDroppedFramesQueue4 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-4- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-4-. The -Queue-4- marking matched the REPORT MPCP message Queue-4 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU." ::= { eponDeviceStatEntry 21} eponDeviceStatDroppedFramesQueue5 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-5- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-5-. The -Queue-5- marking matched the REPORT MPCP message Queue-5 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU." ::= { eponDeviceStatEntry 22} eponDeviceStatDroppedFramesQueue6 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-6- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-6-. The -Queue-6- marking matched the REPORT MPCP message Queue-6 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU." Khermosh Expires March 21, 2005 [Page 56] Internet-Draft Managed Objects of EPON September 2004 ::= { eponDeviceStatEntry 23} eponDeviceStatDroppedFramesQueue7 OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times a -Queue-7- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-7-. The -Queue-7- marking matched the REPORT MPCP message Queue-7 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU." ::= { eponDeviceStatEntry 24} --Editor's Note use reference to event MIB modules [RFC2981] and --docsis MIB modules [RFC2669] eponDeviceEventObjectTable OBJECT-TYPE SYNTAX SEQUENCE OF EponDeviceEventObjectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the Event Objects for EPON devices. The attributes are relevant for an OLT and an ONU." ::= { eponDeviceEventObjects 1} eponDeviceEventObjectEntry OBJECT-TYPE SYNTAX EponDeviceEventObjectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entries for Table of Event objects for EPON devices." INDEX { ifIndex } ::= { eponDeviceEventObjectTable 1 } EponDeviceEventObjectEntry::= SEQUENCE { eponDeviceSampleMinimum Integer32, eponDeviceDyingGaspAlarmState TruthValue, eponDeviceDyingGaspAlarmEnabled TruthValue, eponDeviceCriticalEventState TruthValue, eponDeviceCriticalEventEnabled TruthValue, eponDeviceLocalLinkFaultAlarmState TruthValue, eponDeviceLocalLinkFaultAlarmEnabled TruthValue, Khermosh Expires March 21, 2005 [Page 57] Internet-Draft Managed Objects of EPON September 2004 eponDeviceTemperatureEventIndicationState TruthValue, eponDeviceTemperatureEventIndicationEnabled TruthValue, eponDevicePowerVoltageEventIndicationState TruthValue, eponDevicePowerVoltageEventIndicationEnabled TruthValue, eponDeviceGlobalEventState TruthValue, eponDeviceGlobalEventEnabled TruthValue, eponDeviceErroredSymbolPeriodEventState TruthValue, eponDeviceErroredSymbolPeriodEventEnabled TruthValue, eponDeviceErroredFrameEventState TruthValue, eponDeviceErroredFrameEventEnabled TruthValue, eponDeviceErroredFramePeriodEventState TruthValue, eponDeviceErroredFramePeriodEventEnabled TruthValue, eponDeviceErroredFrameSecondsSummaryEventState TruthValue, eponDeviceErroredFrameSecondsSummaryEventEnabled TruthValue, eponDeviceOrganizationSpecificEventState TruthValue, eponDeviceOrganizationSpecificEventEnabled TruthValue, eponDeviceEventControl INTEGER } eponDeviceSampleMinimum OBJECT-TYPE SYNTAX Integer32 (1..2147483647) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum Frequency of events this system will accept. A system may use the larger values of this minimum to lessen the impact of constant sampling. For larger sampling intervals the system samples less often and suffers less overhead. Unless explicitly resource limited, a system's value for this object SHOULD be 1, allowing as small as a 1 second interval for ongoing trigger sampling. Writing of the value can be done all the time." DEFVAL { 1 } ::= { eponDeviceEventObjectEntry 1 } eponDeviceDyingGaspAlarmState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only variable, which defines the state of the Dying Gasp indication of the OAM alarm indications as described in the [802.3ah] clause 57. When true the device has a dying gasp alarm asserted. When false the dying gasp alarm is reset " ::= { eponDeviceEventObjectEntry 2} Khermosh Expires March 21, 2005 [Page 58] Internet-Draft Managed Objects of EPON September 2004 eponDeviceDyingGaspAlarmEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A control to allow DyingGaspAlarm event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time." DEFVAL { false } ::= { eponDeviceEventObjectEntry 3 } eponDeviceCriticalEventState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only variable, which defines the state of the Critical Event indication of the OAM alarm indications as described in the [802.3ah] clause 57. When true the device has a Critical Event asserted. When false the Critical Event is reset." ::= { eponDeviceEventObjectEntry 4 } eponDeviceCriticalEventEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A control to allow CriticalEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time." DEFVAL { false } ::= { eponDeviceEventObjectEntry 5 } eponDeviceLocalLinkFaultAlarmState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only variable, which defines the state of the Local Link Fault indication of the OAM alarm indications as described in the [802.3ah] clause 57. When true the device has a Local Link Fault alarm asserted. When false the Local Link Fault alarm is reset." ::= { eponDeviceEventObjectEntry 6 } Khermosh Expires March 21, 2005 [Page 59] Internet-Draft Managed Objects of EPON September 2004 eponDeviceLocalLinkFaultAlarmEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A control to allow LocalLinkFaultAlarm event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time." DEFVAL { false } ::= { eponDeviceEventObjectEntry 7 } eponDeviceTemperatureEventIndicationState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only variable, which defines the state of the Temperature Event indication of an EPON device. When condition of box temperature is above the threshold defined the alarm is asserted. When the condition is below that threshold the alarm is de-asserted. When true the device has a Temperature Event Indication asserted. When false the Temperature Event Indication is reset." ::= { eponDeviceEventObjectEntry 8 } eponDeviceTemperatureEventIndicationEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A control to allow TemperatureEventIndication event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time." DEFVAL { false } ::= { eponDeviceEventObjectEntry 9 } eponDevicePowerVoltageEventIndicationState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only variable, which defines the state of the Power/Voltage Event Indication of an EPON device. When condition of box Power/voltage is above the threshold defined the alarm is asserted. When the condition is Khermosh Expires March 21, 2005 [Page 60] Internet-Draft Managed Objects of EPON September 2004 below that threshold the alarm is de-asserted. When true the device has a Power/Voltage Event Indication asserted. When false the Power/Voltage Event Indication is reset. " ::= { eponDeviceEventObjectEntry 10 } eponDevicePowerVoltageEventIndicationEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A control to allow PowerVoltageEventIndication event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time." DEFVAL { false } ::= { eponDeviceEventObjectEntry 11 } eponDeviceGlobalEventState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only variable, which defines the state of the Global Event indication of an EPON device. When the indication of the event input occurs the event is asserted. When the input is removed that event is de-asserted. When true the device has a Global Event asserted. When false the Global Event Indication is reset." ::= { eponDeviceEventObjectEntry 12 } eponDeviceGlobalEventEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A control to allow GlobalEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time." DEFVAL { false } ::= { eponDeviceEventObjectEntry 13 } eponDeviceErroredSymbolPeriodEventState OBJECT-TYPE SYNTAX TruthValue Khermosh Expires March 21, 2005 [Page 61] Internet-Draft Managed Objects of EPON September 2004 MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only variable, which defines the state of the Errored Symbol Period Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Symbol Period Event asserted. When false the Errored Symbol Period Event is reset." ::= { eponDeviceEventObjectEntry 14} eponDeviceErroredSymbolPeriodEventEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A control to allow ErroredSymbolPeriodEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time." DEFVAL { false } ::= { eponDeviceEventObjectEntry 15 } eponDeviceErroredFrameEventState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only variable, which defines the state of the Errored Frame Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Frame Event asserted. When false the Errored Frame Event is reset." ::= { eponDeviceEventObjectEntry 16 } eponDeviceErroredFrameEventEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A control to allow ErroredFrameEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time." DEFVAL { false } ::= { eponDeviceEventObjectEntry 17 } Khermosh Expires March 21, 2005 [Page 62] Internet-Draft Managed Objects of EPON September 2004 eponDeviceErroredFramePeriodEventState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only variable, which defines the state of the Errored Frame Period Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Frame Period Event asserted. When false the Errored Frame Period Event is reset." ::= { eponDeviceEventObjectEntry 18 } eponDeviceErroredFramePeriodEventEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A control to allow ErroredFramePeriodEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time." DEFVAL { false } ::= { eponDeviceEventObjectEntry 19 } eponDeviceErroredFrameSecondsSummaryEventState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only variable, which defines the state of the Errored Frame Seconds Summary Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Frame Seconds Summary Event asserted. When false the Errored Frame Seconds Summary Event is reset." ::= { eponDeviceEventObjectEntry 20 } eponDeviceErroredFrameSecondsSummaryEventEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A control to allow ErroredFrameSecondsSummaryEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time." Khermosh Expires March 21, 2005 [Page 63] Internet-Draft Managed Objects of EPON September 2004 DEFVAL { false } ::= { eponDeviceEventObjectEntry 21 } eponDeviceOrganizationSpecificEventState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only variable, which defines the state of the Organization Specific Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Organization Specific Event asserted. When false the Organization Specific Event is reset." ::= { eponDeviceEventObjectEntry 22 } eponDeviceOrganizationSpecificEventEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A control to allow OrganizationSpecificEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time." DEFVAL { false } ::= { eponDeviceEventObjectEntry 23 } eponDeviceEventControl OBJECT-TYPE SYNTAX INTEGER { none(1), resetLog(2), useDefaultReporting(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates and controls the resetting of the Event log. Setting this object to none(1) has no action resetLog(2) empties the event log. All data is deleted. Setting it to useDefaultReporting(3) returns all event priorities to their factory-default reporting. Reading this object always returns useDefaultReporting(3)." DEFVAL { 3 } ::= { eponDeviceEventObjectEntry 24 } Khermosh Expires March 21, 2005 [Page 64] Internet-Draft Managed Objects of EPON September 2004 -- Events Log Table eponDeviceEventsLogTable OBJECT-TYPE SYNTAX SEQUENCE OF EponDeviceEventsLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of objects provides a log of notification based on the event as pointed to by entries in those tables. The intent is a MAC level event log (set of events to when they happened). This attribute is relevant for an OLT and an ONU." ::= { eponDeviceEventObjects 2 } eponDeviceEventsLogEntry OBJECT-TYPE SYNTAX EponDeviceEventsLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A group of Events. Applications create and delete entries using eponDeviceEventsEntryStatus. When adding objects to a notification they are added in the lexical order of their index in this table." INDEX {eponDeviceEventsLogName, eponDeviceEventsLogIndex } ::= { eponDeviceEventsLogTable 1 } EponDeviceEventsLogEntry ::= SEQUENCE { eponDeviceEventsLogName SnmpAdminString, eponDeviceEventsLogIndex Unsigned32, eponDeviceEventsLogID OBJECT IDENTIFIER, eponDeviceEventsLogFirstTime DateAndTime, eponDeviceEventsLogLastTime DateAndTime, eponDeviceEventsLogCounts Counter32, eponDeviceEventsLogType INTEGER, eponDeviceEventsLogEntryStatus RowStatus } eponDeviceEventsLogName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A locally-unique, administratively assigned name for a group of Events." ::= { eponDeviceEventsLogEntry 1 } eponDeviceEventsLogIndex OBJECT-TYPE Khermosh Expires March 21, 2005 [Page 65] Internet-Draft Managed Objects of EPON September 2004 SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer for the purpose of identifying individual Events within a eponDeviceEventsLogName group. Events within a group are placed in the notification in the numerical order of this index." ::= { eponDeviceEventsLogEntry 2 } eponDeviceEventsLogID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-create STATUS current DESCRIPTION "The object identifier of a MIB module object to add to a Notification that results from the event. Writing can be done all the time." DEFVAL { zeroDotZero } ::= { eponDeviceEventsLogEntry 3 } eponDeviceEventsLogFirstTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time that an entry was created." ::= { eponDeviceEventsLogEntry 4 } eponDeviceEventsLogLastTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "If multiple events are reported via the same entry, the time that the last event for this entry occurred, otherwise this should have the same value as eponDeviceEventsLogFirstTime." ::= { eponDeviceEventsLogEntry 5 } eponDeviceEventsLogCounts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of consecutive event instances reported by this entry. This starts at 1 with the creation of this row and increments by 1 for each subsequent duplicate Khermosh Expires March 21, 2005 [Page 66] Internet-Draft Managed Objects of EPON September 2004 event." ::= { eponDeviceEventsLogEntry 6 } eponDeviceEventsLogType OBJECT-TYPE SYNTAX INTEGER { eponDeviceDyingGaspAlarmState (1), eponDeviceCriticalEventState (2), eponDeviceLocalLinkFaultAlarmState (3), eponDeviceTemperatureEventIndicationState (4), eponDevicePowerVoltageEventIndicationState (5), eponDeviceGlobalEventState (6), eponDeviceErroredSymbolPeriodEventState (7), eponDeviceErroredFrameEventState (8), eponDeviceErroredFramePeriodEventState (9), eponDeviceErroredFrameSecondsSummaryEventState (10), eponDeviceOrganizationSpecificEventState (11) } MAX-ACCESS read-only STATUS current DESCRIPTION "A list of types for Events. Events are ordered according to their significance where 1 is the highest severity. eponDeviceDyingGaspAlarmState(1) indicates a Dying Gasp Alarm State, eponDeviceCriticalEventState(2) indicates a Critical Event State, eponDeviceLocalLinkFaultAlarmState(3) indicates a Local Link Fault Alarm State, eponDeviceTemperatureEventIndicationState(4) indicates a Temperature Event Indication State, eponDevicePowerVoltageEventIndicationState(5) indicates a Power Voltage Event Indication State, eponDeviceGlobalEventState(6) indicates a Global Event State, eponDeviceErroredSymbolPeriodEventState(7) indicates an Errored Symbol Period Event State, eponDeviceErroredFrameEventState(8) indicates an Errored Frame Event State, eponDeviceErroredFramePeriodEventState(9) indicates an Errored Frame Period Event State, eponDeviceErroredFrameSecondsSummaryEventState(10) indicates an Errored Frame Seconds Summary Event State, eponDeviceOrganizationSpecificEventState(11) indicates an Organization Specific Event State. " ::= { eponDeviceEventsLogEntry 7 } eponDeviceEventsLogEntryStatus OBJECT-TYPE Khermosh Expires March 21, 2005 [Page 67] Internet-Draft Managed Objects of EPON September 2004 SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The control that allows creation and deletion of entries. Once made active an entry MAY not be modified except to delete it." ::= { eponDeviceEventsLogEntry 8 } -- Conformance Statements -- Conformance Groups eponDeviceGroups OBJECT IDENTIFIER ::={ eponDeviceConformance 1} eponDeviceGroupControl OBJECT-GROUP OBJECTS { eponDeviceObjectReset, eponDeviceObjectModes, eponDeviceObjectFecEnabled, eponDeviceObjectOamMode, eponDeviceObjectDeviceReadyMode, eponDeviceObjectPowerDown, eponDeviceObjectNumberOfLLIDs, eponDeviceObjectReportThreshold, eponDeviceRemoteMACAddressLLIDControl } STATUS current DESCRIPTION "A collection of objects of eponDevice control definition." ::= { eponDeviceGroups 1 } eponDeviceGroupRMadLTable OBJECT-GROUP OBJECTS { eponDeviceRMadlLLID, eponDeviceRMadlLogID, eponDeviceRMadlRemoteAddress, eponDeviceRMadlType, eponDeviceRMadlAction, eponDeviceRMadlEntryStatus } STATUS current DESCRIPTION Khermosh Expires March 21, 2005 [Page 68] Internet-Draft Managed Objects of EPON September 2004 "A collection of objects of eponDevice remote Mac address to LLID table." ::= { eponDeviceGroups 2 } eponDeviceGroupStat OBJECT-GROUP OBJECTS { eponDeviceStatTxFramesQueue0, eponDeviceStatTxFramesQueue1, eponDeviceStatTxFramesQueue2, eponDeviceStatTxFramesQueue3, eponDeviceStatTxFramesQueue4, eponDeviceStatTxFramesQueue5, eponDeviceStatTxFramesQueue6, eponDeviceStatTxFramesQueue7, eponDeviceStatRxFramesQueue0, eponDeviceStatRxFramesQueue1, eponDeviceStatRxFramesQueue2, eponDeviceStatRxFramesQueue3, eponDeviceStatRxFramesQueue4, eponDeviceStatRxFramesQueue5, eponDeviceStatRxFramesQueue6, eponDeviceStatRxFramesQueue7, eponDeviceStatDroppedFramesQueue0, eponDeviceStatDroppedFramesQueue1, eponDeviceStatDroppedFramesQueue2, eponDeviceStatDroppedFramesQueue3, eponDeviceStatDroppedFramesQueue4, eponDeviceStatDroppedFramesQueue5, eponDeviceStatDroppedFramesQueue6, eponDeviceStatDroppedFramesQueue7 } STATUS current DESCRIPTION "A collection of objects of EPON device Statistics" ::= { eponDeviceGroups 3 } eponDeviceGroupEvent OBJECT-GROUP OBJECTS { eponDeviceSampleMinimum, eponDeviceDyingGaspAlarmState, eponDeviceDyingGaspAlarmEnabled, eponDeviceCriticalEventState, eponDeviceCriticalEventEnabled, eponDeviceLocalLinkFaultAlarmState, eponDeviceLocalLinkFaultAlarmEnabled, Khermosh Expires March 21, 2005 [Page 69] Internet-Draft Managed Objects of EPON September 2004 eponDeviceTemperatureEventIndicationState, eponDeviceTemperatureEventIndicationEnabled, eponDevicePowerVoltageEventIndicationState, eponDevicePowerVoltageEventIndicationEnabled, eponDeviceGlobalEventState, eponDeviceGlobalEventEnabled, eponDeviceErroredSymbolPeriodEventState, eponDeviceErroredSymbolPeriodEventEnabled, eponDeviceErroredFrameEventState, eponDeviceErroredFrameEventEnabled, eponDeviceErroredFramePeriodEventState , eponDeviceErroredFramePeriodEventEnabled , eponDeviceErroredFrameSecondsSummaryEventState , eponDeviceErroredFrameSecondsSummaryEventEnabled, eponDeviceOrganizationSpecificEventState , eponDeviceOrganizationSpecificEventEnabled, eponDeviceEventControl } STATUS current DESCRIPTION "A collection of objects for EPON device Events" ::= { eponDeviceGroups 4 } eponDeviceGroupEventLog OBJECT-GROUP OBJECTS { eponDeviceEventsLogID, eponDeviceEventsLogFirstTime, eponDeviceEventsLogLastTime, eponDeviceEventsLogCounts, eponDeviceEventsLogType, eponDeviceEventsLogEntryStatus } STATUS current DESCRIPTION "A collection of objects for EPON device Events log" ::= { eponDeviceGroups 5 } -- Compliance eponDeviceCompliances OBJECT IDENTIFIER ::= {eponDeviceConformance 2} eponDeviceCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for EPON Devices." MODULE -- this module MANDATORY-GROUPS { eponDeviceGroupControl } Khermosh Expires March 21, 2005 [Page 70] Internet-Draft Managed Objects of EPON September 2004 GROUP eponDeviceGroupRMadLTable DESCRIPTION " This group is mandatory for all OLT EPON devices supporting LLID-MAC address table." GROUP eponDeviceGroupStat DESCRIPTION "This group is mandatory for all EPON devices supporting interfaces for Statistics collection." GROUP eponDeviceGroupEvent DESCRIPTION "This group is mandatory for all EPON devices supporting interfaces for event collection." GROUP eponDeviceGroupEventLog DESCRIPTION "This group is mandatory for all EPON devices supporting interfaces for event log collection." ::= { eponDeviceCompliances 1} END Khermosh Expires March 21, 2005 [Page 71] Internet-Draft Managed Objects of EPON September 2004 10. Security Considerations There are number of managed objects defined in this MIB module that have a MAX-ACCESS clause of read-write or read-create. Writing to these objects can have a potentially disruptive effects on network operation: Including: Changing dot3MpcpMode mode (Writing can be done during initialization only when dot3MpcpOperStatus indicates Flase) Changing dot3MpcpAdminState state (Writing can be done all the time) Changing eponDeviceObjectReportThreshold (Writing can be done all the time) Changing dot3EponMauFecMode mode (Writing can be done all the time) Changing eponDeviceObjectReset mode (Writing can be done all the time) Changing eponDeviceObjectFecEnabled mode (Writing can be done all the time) Changing eponDeviceObjectOamMode mode (Writing can be done during initialization, eponDeviceObjectDeviceReadyMode is in notReady(1) or inProcess(2)) Changing eponDeviceObjectDeviceReadyMode (Writing can be done all the time) Changing eponDeviceObjectPowerDown (Writing can be done all the time) Changing eponDeviceObjectReportThreshold (Writing can be done all the time) Changing eponDeviceRemoteMACAddressLLIDControl (Writing can be done all the time) Changing eponDeviceRMadlLogID (Writing can be done all the time) Changing eponDeviceRMadlLLID (Writing can be done all the time) Changing eponDeviceRMadlRemoteAddress (Writing can be done all the time) Changing eponDeviceRMadlType (Writing can be done all the time) Changing eponDeviceRMadlAction (Writing can be done all the time) Khermosh Expires March 21, 2005 [Page 72] Internet-Draft Managed Objects of EPON September 2004 Changing eponDeviceRMadlEntryStatus (Writing can be done all the time) Changing eponDeviceSampleMinimum(Writing can be done all the time) Changing eponDeviceDyingGaspAlarmEnabled (Writing can be done all the time) Changing eponDeviceCriticalEventEnabled (Writing can be done all the time) Changing eponDeviceLocalLinkFaultAlarmEnabled (Writing can be done all the time) Changing eponDeviceTemperatureEventIndicationEnabled (Writing can be done all the time) Changing eponDevicePowerVoltageEventIndicationEnabled (Writing can be done all the time) Changing eponDeviceGlobalEventEnabled (Writing can be done all the time) Changing eponDeviceErroredSymbolPeriodEventEnabled (Writing can be done all the time) Changing eponDeviceErroredFrameEventEnabled (Writing can be done all the time) Changing eponDeviceErroredFramePeriodEventEnabled (Writing can be done all the time) Changing eponDeviceErroredFrameSecondsSummaryEventEnabled (Writing can be done all the time) Changing eponDeviceOrganizationSpecificEventEnabled (Writing can be done all the time) Changing eponDeviceEventControl (Writing can be done all the time) Changing eponDeviceEventsLogID (Writing can be done all the time) Changing eponDeviceEventsLogEntryStatus (Writing can be done all the time) The user of this MIB module must therefore be aware that support for SET operations in a non-secure environment without proper protection Khermosh Expires March 21, 2005 [Page 73] Internet-Draft Managed Objects of EPON September 2004 can have a negative effect on network operations. The readable objects in this MIB module (i.e., those with MAX-ACCESS other than not-accessible) may be considered sensitive in some environments since, collectively, they provide information about the performance of network interfaces and can reveal some aspects of their configuration. In such environments it is important to control even GET and NOTIFY access to these objects and possibly even to encrypt their values when sending them over the network via SNMP. SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPSec), even then, there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB module. It is RECOMMENDED that implementers consider the security features as provided by the SNMPv3 framework (see [RFC3410], section 8), including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy). Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them. Khermosh Expires March 21, 2005 [Page 74] Internet-Draft Managed Objects of EPON September 2004 11. References 11.1 Normative References [802.3] IEEE, "Institute of Electrical and Electronic Engineers, IEEE Std 802.3-2002, "IEEE Standard for Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications", December 2002. [802.3ah] IEEE, "Draft amendment to - Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - Media Access Control Parameters, Physical Layers and Management Parameters for subscriber access networks", IEEE Draft P802.3ah/D3.3, April 2004. [I-D.ietf-hubmib-efm-mib] Squire, M., "Ethernet in the First Mile (EFM) Common MIB", draft-squire-hubmib-efm-mib-00 (work in progress), October 2003. [RFC1493] Decker, E., Langille, P., Rijsinghani, A. and K. McCloghrie, "Definitions of Managed Objects for Bridges", RFC 1493, July 1993. [RFC1525] Decker, E., McCloghrie, K., Langille, P. and A. Rijsinghani, "Definitions of Managed Objects for Source Routing Bridges", RFC 1525, September 1993. [RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. [RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999. [RFC2580] McCloghrie, K., Perkins, D. and J. Schoenwaelder, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999. [RFC2669] St. Johns, M., "DOCSIS Cable Device MIB Cable Device Management Information Base for DOCSIS compliant Cable Modems and Cable Modem Termination Systems", RFC 2669, August 1999. Khermosh Expires March 21, 2005 [Page 75] Internet-Draft Managed Objects of EPON September 2004 [RFC2737] McCloghrie, K. and A. Bierman, "Entity MIB (Version 2)", RFC 2737, December 1999. [RFC2981] Kavasseri, R., "Event MIB", RFC 2981, October 2000. [RFC3591] Lam, H-K., Stewart, M. and A. Huynh, "Definitions of Managed Objects for the Optical Interface Type", RFC 3591, September 2003. [RFC3635] Flick, J., "Definitions of Managed Objects for the Ethernet-like Interface Types", RFC 3635, September 2003. [RFC3636] Flick, J., "Definitions of Managed Objects for IEEE 802.3 Medium Attachment Units (MAUs)", RFC 3636, September 2003. 11.2 Informative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group MIB", RFC 2863, June 2000. [RFC2864] McCloghrie, K. and G. Hanson, "The Inverted Stack Table Extension to the Interfaces Group MIB", RFC 2864, June 2000. [RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart, "Introduction and Applicability Statements for Internet-Standard Management Framework", RFC 3410, December 2002. Author's Address Lior Khermosh Passave Technologies Ackerstein Towers, Tower A, 6th floor, 9 Hamenofim St., Hertzliya Pituach, 46725 ISRAEL Phone: +972-9-9717600 Ext: 7181 Fax: +972-9-9540245 EMail: lior.khermosh@passave.com Khermosh Expires March 21, 2005 [Page 76] Internet-Draft Managed Objects of EPON September 2004 Intellectual Property Statement The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. The IETF has been notified of intellectual property rights claimed in regard to some or all of the specification contained in this document. For more information consult the online list of claimed rights. Disclaimer of Validity This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Copyright Statement Copyright (C) The Internet Society (2004). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. Khermosh Expires March 21, 2005 [Page 77] Internet-Draft Managed Objects of EPON September 2004 Acknowledgment Funding for the RFC Editor function is currently provided by the Internet Society. Khermosh Expires March 21, 2005 [Page 78]