Network Working Group S. Chisholm Internet-Draft K. Curran Expires: December 23, 2006 Nortel H. Trevino Cisco June 21, 2006 NETCONF Event Notifications draft-ietf-netconf-notification-02.txt Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on December 23, 2006. Copyright Notice Copyright (C) The Internet Society (2006). Abstract This memo defines a framework for sending asynchronous messages, or event notifications in NETCONF. It defines both the operations necessary to support this concept, and also discusses implications for the mapping to transport protocols. Chisholm, et al. Expires December 23, 2006 [Page 1] Internet-Draft NETCONF Event Notifications June 2006 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1 Definition of Terms . . . . . . . . . . . . . . . . . . . 4 1.2 Event Notifications in NETCONF . . . . . . . . . . . . . . 5 1.3 Motivation . . . . . . . . . . . . . . . . . . . . . . . . 5 1.4 Requirements . . . . . . . . . . . . . . . . . . . . . . . 5 1.5 Architecture . . . . . . . . . . . . . . . . . . . . . . . 7 2. Event-Related Operations . . . . . . . . . . . . . . . . . . . 8 2.1 Subscribing to receive Events . . . . . . . . . . . . . . 8 2.1.1 create-subscription . . . . . . . . . . . . . . . . . 8 2.2 Sending Event Notifications . . . . . . . . . . . . . . . 9 2.2.1 Event Notification . . . . . . . . . . . . . . . . . . 9 2.3 Changing the Subscription . . . . . . . . . . . . . . . . 10 2.3.1 modify-subscription . . . . . . . . . . . . . . . . . 10 2.4 Terminating the Subscription . . . . . . . . . . . . . . . 11 2.4.1 cancel-subscription . . . . . . . . . . . . . . . . . 12 3. Supporting Concepts . . . . . . . . . . . . . . . . . . . . . 13 3.1 Capabilities Exchange . . . . . . . . . . . . . . . . . . 13 3.2 Subscriptions and Datastores . . . . . . . . . . . . . . . 13 3.3 Querying Subscription Properties . . . . . . . . . . . . . 13 3.4 One-way Notification Messages . . . . . . . . . . . . . . 18 3.5 Filter Dependencies . . . . . . . . . . . . . . . . . . . 19 3.5.1 Named Profiles . . . . . . . . . . . . . . . . . . . . 19 3.5.2 Filtering . . . . . . . . . . . . . . . . . . . . . . 19 3.6 Event Classes . . . . . . . . . . . . . . . . . . . . . . 19 3.6.1 Initial Set of Event Classes . . . . . . . . . . . . . 20 3.7 Defining Event Notifications . . . . . . . . . . . . . . . 21 3.8 Interleaving Messages . . . . . . . . . . . . . . . . . . 21 4. XML Schema for Event Notifications . . . . . . . . . . . . . . 23 5. Mapping to Transport Protocols . . . . . . . . . . . . . . . . 27 5.1 SSH . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 5.2 BEEP . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 5.2.1 One-way Notification Messages in Beep . . . . . . . . 28 5.3 SOAP . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 5.3.1 A NETCONF over Soap over HTTP Example . . . . . . . . 29 6. Filtering examples . . . . . . . . . . . . . . . . . . . . . . 32 6.1 Event Classes . . . . . . . . . . . . . . . . . . . . . . 32 6.2 Subtree Filtering . . . . . . . . . . . . . . . . . . . . 32 6.3 XPATH filters . . . . . . . . . . . . . . . . . . . . . . 34 7. Additional Capabilities . . . . . . . . . . . . . . . . . . . 36 7.1 Call-Home Notifications . . . . . . . . . . . . . . . . . 36 7.1.1 Overview . . . . . . . . . . . . . . . . . . . . . . . 36 7.1.2 Dependencies . . . . . . . . . . . . . . . . . . . . . 37 7.1.3 Capability Identifier . . . . . . . . . . . . . . . . 37 8. Security Considerations . . . . . . . . . . . . . . . . . . . 41 9. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 42 10. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 43 Chisholm, et al. Expires December 23, 2006 [Page 2] Internet-Draft NETCONF Event Notifications June 2006 11. References . . . . . . . . . . . . . . . . . . . . . . . . . 43 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . 44 A. Design Alternatives . . . . . . . . . . . . . . . . . . . . . 45 A.1 Suspend And Resume . . . . . . . . . . . . . . . . . . . . 45 A.2 Lifecycle . . . . . . . . . . . . . . . . . . . . . . . . 45 B. Event Notifications and Syslog . . . . . . . . . . . . . . . . 46 B.1 Leveraging Syslog Field Definitions . . . . . . . . . . . 46 B.1.1 Field Mapping . . . . . . . . . . . . . . . . . . . . 47 B.1.2 Severity Mapping . . . . . . . . . . . . . . . . . . . 48 B.2 Syslog within NETCONF Events . . . . . . . . . . . . . . . 48 B.2.1 Motivation . . . . . . . . . . . . . . . . . . . . . . 48 B.2.2 Embedding syslog messages in a NETCONF Event . . . . . 48 B.2.3 Supported Forwarding Options . . . . . . . . . . . . . 49 C. Example Configuration Notifications . . . . . . . . . . . . . 51 C.1 Types of Configuration Events . . . . . . . . . . . . . . 51 C.2 Config Event Notification Structure . . . . . . . . . . . 52 C.3 Configuration Event Content . . . . . . . . . . . . . . . 54 C.3.1 Target Datastore . . . . . . . . . . . . . . . . . . . 54 C.3.2 User Info . . . . . . . . . . . . . . . . . . . . . . 54 C.3.3 Data Source . . . . . . . . . . . . . . . . . . . . . 54 C.3.4 Operation . . . . . . . . . . . . . . . . . . . . . . 54 C.3.5 Context . . . . . . . . . . . . . . . . . . . . . . . 54 C.3.6 Entered Command . . . . . . . . . . . . . . . . . . . 55 C.3.7 New Config . . . . . . . . . . . . . . . . . . . . . . 55 C.3.8 Old Config . . . . . . . . . . . . . . . . . . . . . . 55 C.3.9 Non-netconf commands in configuration notifications . 55 D. IP Address Schema . . . . . . . . . . . . . . . . . . . . . . 56 Intellectual Property and Copyright Statements . . . . . . . . 58 Chisholm, et al. Expires December 23, 2006 [Page 3] Internet-Draft NETCONF Event Notifications June 2006 1. Introduction NETCONF [NETCONF-PROTO] can be conceptually partitioned into four layers: Layer Example +-------------+ +----------------------------------------+ | Content | | Configuration data | +-------------+ +----------------------------------------+ | | +-------------+ +-------------------------------------------+ | Operations | | , | +-------------+ +-------------------------------------------+ | | | +-------------+ +-----------------------------+ | | RPC | | , | | +-------------+ +-----------------------------+ | | | | +-------------+ +------------------------------------------+ | Application | | BEEP, SSH, SSL, console | | Protocol | | | +-------------+ +------------------------------------------+ This document defines a framework for sending asynchronous messages, or event notifications in NETCONF. It defines both the operations necessary to support this concept, and also discusses implications for the mapping to transport protocols. Figure 1 1.1 Definition of Terms The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [3]. Element: An XML Element[XML]. Managed Entity: A node, which supports NETCONF[NETCONF-PROTO] and has access to management instrumentation. This is also known as the NETCONF server. Managed Object: A collection of one of more Elements that define an abstract thing of interest. Chisholm, et al. Expires December 23, 2006 [Page 4] Internet-Draft NETCONF Event Notifications June 2006 1.2 Event Notifications in NETCONF An event is something that happens which may be of interest - a configuration change, a fault, a change in status, crossing a threshold, or an external input to the system, for example. Often this results in an asynchronous message, sometimes referred to as a notification or event notification, being sent out to interested parties to notify them that this event has occurred. This memo defines a mechanism whereby the NETCONF client indicates interest in receiving event notifications from a NETCONF server by creating a subscription to receive event notifications. The NETCONF server replies to indicate whether the subscription request was successful and, if it was successful, begins sending the event notifications to the NETCONF client as the events occur within the system. These event notifications will continue to be sent until either the NETCONF session is terminated or an explicit command to cancel the subscription is sent. The event notification subscription allows a number of options to enable the NETCONF client to specify which events are of interest. These are specified when the subscription is created, but can be modified later using a modify subscription command. 1.3 Motivation The motivation for this work is to enable the sending of asynchronous messages that are consistent with the data model (content) and security model used within a Netconf implementation. 1.4 Requirements The requirements for this solution are as follows: o Initial release should ensure it supports notification in support of configuration operations o Data content must be use the same data model as used in configuration o solution should support structured hierarchical data o solution should be able to carry configuration fragments o solution should support a reasonable message size limit (syslog and SNMP are rather constrained in terms of message sizes) o solution should provide reliable delivery of notifications Chisholm, et al. Expires December 23, 2006 [Page 5] Internet-Draft NETCONF Event Notifications June 2006 o solution should support preconfigured notification destinations o solution should support agent initiated connections o solution should provide a subscription mechanism o solution should support multiple subscriptions o solution should provide a filtering mechanism o solution should support notification names o solution should support notification timestamps o solution should support notification classes o solution should support notification info o solution should provide the ability to specify the content of notifications to ensure predictability o solution should send sufficient information in a notification so that it can be analyzed independent of the transport mechanism o solution should allow notifications to refer to prior configuration change RPCs o solution should not bind subscriptions to a connection o channels for configuration change notifications should share fate with a session that includes a configuration channel o solution should support replay of locally logged notifications o solution should support message chunking capability in cases channels carry mixed RPCs o solution should scale to 30.000-100.000 nodes which may emit notifications o solution should scale to order 30.000-100.000 nodes to send notifications [BL] See also the external website tracking requirements at http://www.eecs.iu-bremen.de/wiki/index.php/Netconf_notifications Chisholm, et al. Expires December 23, 2006 [Page 6] Internet-Draft NETCONF Event Notifications June 2006 1.5 Architecture [Editor's Note: add pointers to the various architecture discussions in the document and identify what people view to be gaps in architecture discussion. The following may not be what people were looking for in this section, but should at least give people something to discuss] The following figure illustrates that the netconf implementation leverages protocol-neutral event management software within the box rather then re-invent everything in Netconf specific methods. The netconf client understands which notifications are of interest to it and creates a subscription that meets its requirements. The network elements accepts the subscription requests and creates a temporary subscription to meet those needs. ---------------------------------------------- | Network Element | | ------------ | | | Alarm | | | | Management | -------------- | -------------- | ------------ |--->|Netconf Stack |<---------->| Netconf | | | | | | | | | | | | -------------- | --->| Client | | V | | | -------------- | ------------ | | | | | Event |--->| ------------------ | | | | Management | | |Other Protocols | | | | ------------ |--->| | | | | ------------------ | | |--------------------------------------------- | | ---------------------------------------------- | | Network Element | | | ------------ | | | | Alarm | | | | | Management | -------------- | | | ------------ |--->|Netconf Stack |<-------| | | | | | | | | | -------------- | | V | | | ------------ | | | | Event |--->| ------------------ | | | Management | | |Other Protocols | | | ------------ |--->| | | | ------------------ | |-------------------------------------------- Chisholm, et al. Expires December 23, 2006 [Page 7] Internet-Draft NETCONF Event Notifications June 2006 2. Event-Related Operations 2.1 Subscribing to receive Events The event notification subscription is initiated by the NETCONF client and responded to by the NETCONF server. When the event notification subscription is created, the events of interest are specified. It is possible to create more than one event notification subscription on a single underlying connection. Each event notification subscription therefore has its own unique identifier. Content for an event notification subscription can be selected by specifying which event classes are of interest and /or by applying user-specified filters. 2.1.1 create-subscription Description: This operation initiates an event notification subscription which will send asynchronous event notifications to the initiator of the command until the command is sent. Parameters: Event Classes: An optional parameter that indicates which event classes are of interest. If not present, events of all classes will be sent. Filter: An optional parameter that indicates which subset of all possible events are of interest. The format of this parameter is the same as that of the filter parameter in the NETCONF protocol operations. If not present, all events not precluded by other parameters will be sent. These filter parameters can only be modified using the modify-subscription command. Named Profile Chisholm, et al. Expires December 23, 2006 [Page 8] Internet-Draft NETCONF Event Notifications June 2006 An optional parameter that points to a separately defined filter profile. The contents of the profile are specified in the provided XML Schema. If not present, no additional filtering will be applied. Note that changes to the profile after the subscription has been created will have no effect unless a modify subscription command is issued. Positive Response: If the NETCONF server can satisfy the request, the server sends an element containing a element containing the subscription ID. Negative Response: An element is included within the if the request cannot be completed for any reason. Subscription requests will fail if a filter with invalid syntax is provided or if the name of a non-existent profile is provided. 2.2 Sending Event Notifications Once the subscription has been set up, the NETCONF server sends the event notifications asynchronously along the connection. Notifications are tagged with event classes, subscription ID, sequence number, and date and time. 2.2.1 Event Notification Description: An event notification is sent to the initiator of an command asynchronously when an event of interest (i.e. meeting the specified filtering criteria) to them has occurred. An event notification is a complete XML document. Parameters: Event Classes: The event class or classes associated with this event notification Chisholm, et al. Expires December 23, 2006 [Page 9] Internet-Draft NETCONF Event Notifications June 2006 Subscription Id: A unique identifier for this event subscription Sequence Number: A sequentially increasing number to uniquely identify event notifications for this subscription. It starts at 0, always increases by just one and rolls back to 0 after its maximum value is reached. Date and Time: The date and time that the event notification was sent by the NETCONF server. Data: Contains event class and notification-specific tagged content. Positive Response: No response. Negative Response: No response. 2.3 Changing the Subscription After an event notification subscription has been established, the NETCONF client can initiate a request to change properties of the event notification subscription. This prevents loss of event notifications that might otherwise occur during a cancelling and recreation of the event notification subscription. This operation is responded to by the NETCONF server 2.3.1 modify-subscription Description: Chisholm, et al. Expires December 23, 2006 [Page 10] Internet-Draft NETCONF Event Notifications June 2006 Change properties of the event notification subscription. Parameters: Subscription Id: A unique identifier for this event subscription. Event Classes: An optional parameter that indicates which Event Classes are of interest. If not present, events of all classes will be sent. Filter: An optional parameter that indicates which subset of all possible events that are of interest. The format is the same filter used for other NETCONF commands. If not present, all events not precluded by other parameters will be sent. These filter parameters can only be modified using the modify- subscription command. Named Profile: An optional parameter that points to separately defined filter profile. The contents of the profile are specified in provided XML Schema. If not present, no additional filtering will be applied. Note that changes to the profile after the subscription has been created will have no effect unless a modify subscription command is issued. Positive Response: If the NETCONF server was able to satisfy the request, an is sent that includes an element. Negative Response: An element is included within the if the request cannot be completed for any reason. Subscription requests will fail if a filter with invalid syntax is provided or if the name of a non-existent profile is provided. 2.4 Terminating the Subscription Closing of the event notification subscription is initiated by the NETCONF client. The specific subscription to be closed is specified Chisholm, et al. Expires December 23, 2006 [Page 11] Internet-Draft NETCONF Event Notifications June 2006 using a subscription ID. The NETCONF server responds. Note that the NETCONF session may also be torn down for other reasons and this will also result in the subscription being cancelled, but is not subjected to the behaviour of this operation. 2.4.1 cancel-subscription Description: Stop and delete the event notification subscription. Parameters: Subscription Id: A unique identifier for this event notification subscription. Positive Response: If the NETCONF server was able to satisfy the request, an is sent that includes an element. Negative Response: An element is included within the if the request cannot be completed for any reason. Chisholm, et al. Expires December 23, 2006 [Page 12] Internet-Draft NETCONF Event Notifications June 2006 3. Supporting Concepts 3.1 Capabilities Exchange The ability to process and send event notifications is advertised during the capability exchange between the NETCONF client and server. "urn:ietf:params:xml:ns:netconf:notification:1.0" For Example urn:ietf:params:xml:ns:netconf:base:1.0 urn:ietf:params:xml:ns:netconf:capability:startup:1.0 urn:ietf:params:xml:ns:netconf:notification:1.0 4 3.2 Subscriptions and Datastores Subscriptions are like Netconf sessions in that they don't exist Netconf datastores. The two exceptions to this are named profiles and the optional call-home notification feature. 3.3 Querying Subscription Properties The following Schema can be used to retrieve information about active event notification subscriptions Schema for reporting on Event Subscriptions NetconfNotificationSchema 2006-04-30T09:30:47-05:00 IETF A schema that can be used to learn about current NetConf Event subscriptions and creating named profiles The session id associated with this subscription. Chisholm, et al. Expires December 23, 2006 [Page 14] Internet-Draft NETCONF Event Notifications June 2006 The subscription id associated with this subscription. The event classes associated with this subscription. The filters associated with this subscription. The named profile associated with this subscription. Note that the contents of the named profile may have changed since it was last applied. Chisholm, et al. Expires December 23, 2006 [Page 15] Internet-Draft NETCONF Event Notifications June 2006 The last time this subscription was modified. If it has not been modified since creation, this is the time of subscription creation. A count of event notifications sent along this connection since the subscription was created. The sequence number of the last event notification sent to this subscription Chisholm, et al. Expires December 23, 2006 [Page 16] Internet-Draft NETCONF Event Notifications June 2006 The event classes associated with this named Profile. The filters associated with this named Profile. The timestamp of the last modification to this named Profile. Note that modification of the profile does not cause an immediate update to all applicable subscription. Therefore, this time should be compared with the last modified time associated with the subscription. If this time is earlier, then the subscription is using the exact set of parameters associated Chisholm, et al. Expires December 23, 2006 [Page 17] Internet-Draft NETCONF Event Notifications June 2006 with this named profile. If this time is later, then the subscription is using an earlier version of this named profile and the exact parameters may not match. 3.4 One-way Notification Messages In order to support the concept that each individual event notification is a well-defined XML-document that can be processed without waiting for all events to come in, it makes sense to define events, not as an endless reply to a subscription command, but as independent messages that originate from the NETCONF server. In order to support this model, this memo introduces the concept of notifications, which are one-way messages. A one-way message is similar to the two-way RPC message, except that no response is expected to the command. In the case of event notification, this message will originate from the NETCONF server, Chisholm, et al. Expires December 23, 2006 [Page 18] Internet-Draft NETCONF Event Notifications June 2006 and not the NETCONF client. 3.5 Filter Dependencies Note that when multiple filters are specified (Event Class, in-line Filter, Named Profiles), they are applied collectively, so event notifications needs to pass all specified filters in order to be sent to the subscriber. If a filter is specified to look for data of a particular value, and the data item is not present within a particular event notification for its value to be checked against, it will be filtered out. For example, if one were to check for 'severity=critical' in a configuration event notification where this field was not supported, then the notification would be filtered out. 3.5.1 Named Profiles A named profile is a filter that is created ahead of time and applied at the time an event notification subscription is created or modified. Note that changes to the profile after the subscription has been created will have no effect unless a modify subscription command is issued. Since named profiles exist outside of the subscription, they persist after the subscription has been cancelled. 3.5.2 Filtering Just-in-time filtering is explicitly stated when the event notification subscription is created. These filters can only be changed using the modify subscription command. This is specified via the Filter parameter. Filters only exist as parameters to the subscription. 3.6 Event Classes Events can be classified into one more event classes. Each event class identifies a set of event notifications which share similar content are generated from similar events The initial set of event classes is configuration, fault, state, audit, data, maintenance, metrics, security, information, heartbeat and syslogTunnel. See the IANA Considerations section for information on defining new event classes. Chisholm, et al. Expires December 23, 2006 [Page 19] Internet-Draft NETCONF Event Notifications June 2006 All events shall carry the following data: list of event class, timestamp and sequence number of the notification. They may also carry additional data. ___________________________________________________________________ || Notification Header || Data | ||__________________________________________________________||______| || subscriptionId| eventClasses| sequenceNumber| dateAndTime|| | ||_______________|_____________|_______________|____________||______| 3.6.1 Initial Set of Event Classes A configuration event, alternatively known as an inventory event, is used to indicate that hardware, software, or a service has been added, changed or removed. In keeping aligned with NETCONF protocol operations, configuration events may included copy configuration event, delete configuration event, or the edit configuration event (create, delete, merge, replace). As configuration notifications could potentially carry huge amounts of data in order to properly support functions such as security audit logs, so it is expected that netconf clients will engineer their subscriptions to meet their needs and to not overwhelm their capacity to process and store event notifications. Examples include hardware board removed, software module loaded or DNS server reconfigured. Changes are reported to all subscribed clients, not just to those clients whose actions triggered the changes. A fault event notification is generated when a fault condition (error or warning) occurs. A fault event may result in an alarm. Examples of fault events could be a communications alarm, environmental alarm, equipment alarm, processing error alarm, quality of service alarm, or a threshold crossing event. See RFC3877 and RFC2819 for more information. The fault notification should carry the following data: severity, event source, probable cause, specific problem, additional information. A state event indicates a change from one state to another, where a state is a condition or stage in the existence of a managed entity. State change events are seen in many specifications. For Entity state changes, see [Entity-State-MIB] for more information. The notification shall identify the object who's state changed and the new state. Internal states of a node are important for supervision purposes and also effect how a node can be configured. Audit events provide event of very specific actions within a managed device. In isolation an audit events provides very limited data. A Chisholm, et al. Expires December 23, 2006 [Page 20] Internet-Draft NETCONF Event Notifications June 2006 collection of audit information forms an audit trail. A data dump event is an asynchronous event containing information about a system, its configuration, state, etc. A maintenance event signals the beginning, process or end of an action either generated by a manual or automated maintenance action. If the maintenance event is a direct result of a configuration management operation on this Netconf session then an rpc-reply notification should be used. This event class is intended instead for reporting on scheduled maintenance activities. Expected data includes a description of the maintenance process, the stage the process has reached, the manual action, automatic process that triggered the notification. Examples include automatic backup completed. A metrics event contains a metric or a collection of metrics. This includes performance metrics. A heart beat event is sent periodically to enable testing that the communications channel is still functional. It behaves much like the other event classes, with the exception that implementations may not want to include an event log, if supported. Although widely used throughout the industry, no current corresponding work within the IETF. However, other standards bodies such as the TeleManagement Forum have similar definitions. An Information event is something that happens of interest which is within the expected operational behaviour and not otherwise covered by another class. syslogTunnel event is when syslog content is sent, unmodified, within a Netconf event Notification. See appendix X.X for more information.. 3.7 Defining Event Notifications Event Notifications are defined ahead of time by defining an XML element and assigning it to particular event classes. This will be done using an "eventClasses" attribute. 3.8 Interleaving Messages While each NETCONF message must be a complete XML document, the design of the event system allows for the interleaving of complete asynchronous event notifications with complete synchronous messages. It is possible to still send command-response type messages such as while events are being generated. The only Chisholm, et al. Expires December 23, 2006 [Page 21] Internet-Draft NETCONF Event Notifications June 2006 restriction is that each message must be complete The following sequence diagram demonstrates an example NETCONF session where after basic session establishment and capability exchange, NETCONF client (C), subscribes to receive event notifications. The NETCONF server (S), starts sending event notifications as events of interest happen within the system. The NETCONF client decides to change the characteristics of their event subscription by sending a command. Before the NETCONF server, receives this command, another event is generated and the NETCONF server starts to send the event notification. The NETCONF server finishes sending this event notification before processing the command and sending the reply. C S | | | capability exchange | |-------------------------->| |<------------------------->| | | | | |-------------------------->| |<--------------------------| | | | | |<--------------------------| | | | | |<--------------------------| | | | | |-------------------------->| (buffered) | | |<--------------------------| | | |<--------------------------| Chisholm, et al. Expires December 23, 2006 [Page 22] Internet-Draft NETCONF Event Notifications June 2006 4. XML Schema for Event Notifications This import accesses the xml: attribute groups for the xml:lang as declared on the error-message element. The unique identifier for this particular subscription within the session. A monotonically increasing integer. Starts at 0. Always increases by just one. Roll back to 0 after maximum value is reached. Chisholm, et al. Expires December 23, 2006 [Page 23] Internet-Draft NETCONF Event Notifications June 2006 Chisholm, et al. Expires December 23, 2006 [Page 24] Internet-Draft NETCONF Event Notifications June 2006 The date and time that the notification was sent by the netconf server. Chisholm, et al. Expires December 23, 2006 [Page 26] Internet-Draft NETCONF Event Notifications June 2006 5. Mapping to Transport Protocols Currently, the NETCONF family of specification allows for running NETCONF over a number of transport protocols, some of which support multiple configurations. Some of these options will be better suited for supporting event notifications then others. 5.1 SSH Session establishment and two-way messages are based on the NETCONF over SSH transport mapping [NETCONF-SSH] One-way event messages are supported as follows: Once the session has been established and capabilities have been exchanged, the server may send complete XML documents to the NETCONF client containing notification elements. No response is expected from the NETCONF client. As the other examples in [NETCONF-SSH] illustrate, a special character sequence, MUST be sent by both the client and the server after each XML document in the NETCONF exchange. This character sequence cannot legally appear in an XML document, so it can be unambiguously used to identify the end of the current document in the event notification of an XML syntax or parsing error, allowing resynchronization of the NETCONF exchange. The NETCONF over SSH session to receive an event notification might look like the following. Note the event notification contents (delimited by tags) are not defined in this document and are provided herein simply for illustration purposes: Chisholm, et al. Expires December 23, 2006 [Page 27] Internet-Draft NETCONF Event Notifications June 2006 123456 2 2000-01-12T12:13:14Z Fred Flinstone Ethernet0/0 1500 ]]> ]]> 5.2 BEEP Session establishment and two-way messages are based on the NETCONF over BEEP transport mapping NETCONF-BEEP 5.2.1 One-way Notification Messages in Beep One-way notification messages can be supported either by mapping to the existing one-to-many BEEP construct or by creating a new one-to- none construct. This area is for future study. 5.2.1.1 One-way messages via the One-to-many Construct Messages in one-to-many exchanges: "rpc", "notification", "rpc-reply" Messages in positive replies: "rpc-reply", "rpc-one-way" Chisholm, et al. Expires December 23, 2006 [Page 28] Internet-Draft NETCONF Event Notifications June 2006 5.2.1.2 One-way notification messages via the One-to-none Construct Note that this construct would need to be added to an extension or update to 'The Blocks Extensible Exchange Protocol Core' RFC 3080. MSG/NoANS: the client sends a "MSG" message, the server, sends no reply. In one-to-none exchanges, no reply to the "MSG" message is expected. 5.3 SOAP Session management and message exchange are based on the NETCONF over SOAP transport mapping NETCONF-SOAP Note that the use of "persistent connections" "chunked transfer- coding" when using HTTP becomes even more important in the supporting of event notifications 5.3.1 A NETCONF over Soap over HTTP Example C: POST /netconf HTTP/1.1 C: Host: netconfdevice C: Content-Type: text/xml; charset=utf-8 C: Accept: application/soap+xml, text/* C: Cache-Control: no-cache C: Pragma: no-cache C: Content-Length: 465 C: C: C: C: C: C: C: C: C: C: The response: S: HTTP/1.1 200 OK S: Content-Type: application/soap+xml; charset=utf-8 S: Content-Length: 917 S: Chisholm, et al. Expires December 23, 2006 [Page 29] Internet-Draft NETCONF Event Notifications June 2006 S: S: S: S: S: S: S: 123456 S: S: S: S: S: And then some time later S: HTTP/1.1 200 OK S: Content-Type: application/soap+xml; charset=utf-8 S: Content-Length: 917 S: S: S: S: S: S: 123456 S: S: 2 S: 2000-01-12T12:13:14Z S: S: Fred Flinstone S: S: S: S: S: S: S: S: S: Ethernet0/0 S: 1500 S: S: S: S: Chisholm, et al. Expires December 23, 2006 [Page 30] Internet-Draft NETCONF Event Notifications June 2006 S: S: S: S: S: Chisholm, et al. Expires December 23, 2006 [Page 31] Internet-Draft NETCONF Event Notifications June 2006 6. Filtering examples The following section provides examples to illustrate the various methods of filtering content on an event notification subscription. 6.1 Event Classes The following example illustrates selecting all event notifications for EventClasses fault, state or config 6.2 Subtree Filtering XML subtree filtering is not well suited for creating elaborate filter definitions given that it only supports equality comparisons (e.g. in the event subtree give me all event notifications which have severity=critical or severity=major or severity=minor). Nevertheless, it may be used for defining simple notification forwarding filters as shown below. The following example illustrates selecting fault EventClass which have severities of critical, major, or minor. The filtering criteria evaluation is as follows: ((fault) & ((severity=critical) | (severity=major) | (severity = minor))) Chisholm, et al. Expires December 23, 2006 [Page 32] Internet-Draft NETCONF Event Notifications June 2006 critical major minor The following example illustrates selecting fault, state, config EventClasses which have severities of critical, major, or minor and come from card Ethernet0. The filtering criteria evaluation is as follows: ((fault | state | config) & ((fault & severity=critical) | (fault & severity=major) | (fault & severity = minor) | (card=Ethernet0))) Chisholm, et al. Expires December 23, 2006 [Page 33] Internet-Draft NETCONF Event Notifications June 2006 fault critical fault major fault minor Ethernet0 6.3 XPATH filters The following example illustrates selecting fault EventClass which have severities of critical, major, or minor. The filtering criteria evaluation is as follows: ((fault) & ((severity=critical) | (severity=major) | (severity = minor))) Chisholm, et al. Expires December 23, 2006 [Page 34] Internet-Draft NETCONF Event Notifications June 2006 (/event[eventClasses/fault] and (/event[severity="critical"] or /event[severity="major"] or /event[severity="minor"])) The following example illustrates selecting fault, state, config EventClasses which have severities of critical, major, or minor and come from card Ethernet0. The filtering criteria evaluation is as follows: ((fault | state | config) & ((fault & severity=critical) | (fault & severity=major) | (fault & severity = minor) | (card=Ethernet0))) ((/event[eventClasses/fault] or /event[eventClasses/state] or /event[eventClasses/config]) and ( (/event[eventClasses/fault] and /event[severity="critical"]) or (/event[eventClasses/fault] and /event[severity="major"]) or (/event[eventClasses/fault] and /event[severity="minor"]) or /event[card="Ethernet0"])) Chisholm, et al. Expires December 23, 2006 [Page 35] Internet-Draft NETCONF Event Notifications June 2006 7. Additional Capabilities 7.1 Call-Home Notifications 7.1.1 Overview Call-Home Notifications are an alternative model for providing notifications that may be preferred for two particular use cases. The first use case is NAT traversal as in this model, the Netconf server initiates the Notification session. The second use case is when a manager has a large number of low-priority devices that it only wants to deal with when there a known issue. While this risks loss of information, for this particular use case, this is not considered an issue. The Call-home-Notification feature supports the concept of a short-lived notification session that only exists when there is something to report. In this feature, a subscription consists of a named profile, and an association with a Netconf client. Unlike normal subscriptions, which only exist when they are active, these subscriptions live while both dormant and active. When an event of interest happens on the managed resource, the Netconf server checks the list of dormant subscriptions and if the filtering parameters in the subscription indicate interest in the Notification resulting from the event, then the Netconf server initiates the connection to the specific Netconf client and sends the Notification. When the Notification has been sent, the connection is terminated. A subscription is active when it is currently session between the Netconf client and server related to this subscription on which Notifications can be sent. A subscription is dormant when there is currently no session set up between the Netconf client and server related to this notification subscription. 7.1.1.1 Session Lifecycle In order to avoid situations in which a sessions is continuously setup and torn down, an inactivity timer is configured on the server. The timeout interval value is the same for all sessions (i.e. system wide) and each session has its own timer. Upon expiration of the inactivity timer, the connection is terminated, otherwise if activity is detected, the timer is reset. [Editor's note: alternatives here were to either create and tear down the session for each notification received or to have the server somehow figure out that there are more notifications coming soon after it has sent a notification and therefore keeps the connection up.] Chisholm, et al. Expires December 23, 2006 [Page 36] Internet-Draft NETCONF Event Notifications June 2006 The session establishment procedure is as follows: 1) The NETCONF server checks to ensure there isn't already a suitable notification session open. 2) The NETCONF server initiates a session using a recognized transport protocol (SSH, Beep, SOAP, etc). In order to "activate" this reverse behavior a new SSH subsystem may need to be defined. This is for further study. In addition, the NE hosting the NETCONF server must support both client and server modes in the case of SSH. 3) Client and server are authenticated according to the underlying transport protocol (e.g. SSH, BEEP) 4) If using BEEP, as described in [NETCONF-BEEP] either party may initiate the BEEP session. Once this occurs, the assumption is that both parties know their roles. At this point, the NETCONF client, initiates NETCONF session establishment whether running SSH or BEEP. 7.1.2 Dependencies This feature is dependant on the named profiles concept from the normal subscription method as well as the definition of . It also uses the same 7.1.3 Capability Identifier urn:ietf:params:xml:ns:netconf:callHomeNotification:1.0 7.1.3.1 New Operations 7.1.3.1.1 New Data Model Chisholm, et al. Expires December 23, 2006 [Page 37] Internet-Draft NETCONF Event Notifications June 2006 Schema for reporting on dormant Call-Home Notification Subscriptions NetConfCallHomeSchema 2006-04-30T09:30:47-05:00 IETF A schema that can be used to learn about callHome Notification subscriptions The Netconf client that is subscribed to receive these notifications as part of the call-home subscription. Chisholm, et al. Expires December 23, 2006 [Page 38] Internet-Draft NETCONF Event Notifications June 2006 The named profile associated with this subscription. Note that the contents of the named profile may have changed since it was last applied 7.1.3.1.2 Modifications to Existing Operations 7.1.3.1.2.1 This capability adds a new attribute to the command. This attribute is callHome: An optional parameter that, when present, indicates whether this will be a call-home Notification subscription. If not present, this will Chisholm, et al. Expires December 23, 2006 [Page 39] Internet-Draft NETCONF Event Notifications June 2006 be a normal subscription. 7.1.3.1.3 Interactions with Other Capabilities It is only when these subscriptions move from the dormant state to the active state that they have sessions associated with them. It is only at this point that they show up in the active subscription list. Chisholm, et al. Expires December 23, 2006 [Page 40] Internet-Draft NETCONF Event Notifications June 2006 8. Security Considerations To be determined once specific aspects of this solution are better understood. In particular, the access control framework and the choice of transport will have a major impact on the security of the solution Chisholm, et al. Expires December 23, 2006 [Page 41] Internet-Draft NETCONF Event Notifications June 2006 9. IANA Considerations Event Classes will likely be an IANA-managed resource. The initial set of values is defined in this specification. In order for new event classes to be allocated, the following requirements must be met: o There must be working group consensus to add the new class o A detailed description of its purpose in the netconf protocol must be provided o A detailed description of all manager and agent implementation requirements associated with the event class must be provided o The description must make clear to developers how to determine when it is appropriate to choose this event classification for a new notification type list Chisholm, et al. Expires December 23, 2006 [Page 42] Internet-Draft NETCONF Event Notifications June 2006 10. Acknowledgements Thanks to Gilbert Gagnon and Greg Wilbur for providing their input into the early work on this document. In addition, the editors would like to acknowledge input at the Vancouver editing session from the following people: Orly Nicklass, James Bakstrieve, Yoshifumi Atarashi, Glenn Waters, Alexander Clemm, Dave Harrington, Dave Partain, Ray Atarashi and Dave Perkins. In addition, they would like to thank Balazs Lengyel his contributions to the event class text. 11. References [NETCONF] Enns, R., "NETCONF Configuration Protocol", ID draft-ietf-netconf-prot-12, February 2006. [NETCONF BEEP] Lear, E. and K. Crozier, "Using the NETCONF Protocol over Blocks Extensible Exchange Protocol (BEEP)", ID draft-ietf-netconf-beep-10, March 2006. [NETCONF Datamodel] Chisholm, S. and S. Adwankar, "Framework for NETCONF Content", ID draft-chisholm-netconf-model-05.txt, April 2006. [NETCONF SOAP] Goddard, T., "Using the Network Configuration Protocol (NETCONF) Over the Simple Object Access Protocol (SOAP)", ID draft-ietf-netconf-soap-08, March 2006. [NETCONF SSH] Wasserman, M. and T. Goddard, "Using the NETCONF Configuration Protocol over Secure Shell (SSH)", ID draft-ietf-netconf-ssh-06.txt, March 2006. [URI] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifiers (URI): Generic Syntax", RFC 2396, August 1998. [XML] World Wide Web Consortium, "Extensible Markup Language (XML) 1.0", W3C XML, February 1998, . [refs.RFC2026] Bradner, S., "The Internet Standards Process -- Revision 3", RFC 2026, BCP 9, October 1996. [refs.RFC2119] Chisholm, et al. Expires December 23, 2006 [Page 43] Internet-Draft NETCONF Event Notifications June 2006 Bradner, s., "Key words for RFCs to Indicate Requirements Levels", RFC 2119, March 1997. [refs.RFC2223] Postel, J. and J. Reynolds, "Instructions to RFC Authors", RFC 2223, October 1997. [refs.RFC3080] Rose, M., "The Blocks Extensible Exchange Protocol Core", RFC 3080, March 2001. Authors' Addresses Sharon Chisholm Nortel 3500 Carling Ave Nepean, Ontario K2H 8E9 Canada Email: schishol@nortel.com Kim Curran Nortel 3500 Carling Ave Nepean, Ontario K2H 8E9 Canada Email: kicurran@nortel.com Hector Trevino Cisco Suite 400 9155 E. Nichols Ave Englewood, CO 80112 USA Email: htrevino@cisco.com Chisholm, et al. Expires December 23, 2006 [Page 44] Internet-Draft NETCONF Event Notifications June 2006 Appendix A. Design Alternatives A.1 Suspend And Resume The purpose of the operation is to stop event notification forwarding and since the notification subscription is transient the operation naturally removes all subscription configuration; For this reasons, a different mechanism might be needed for shutting down the notification session but preserving the subscription information thus allowing the NETCONF server to re- establish the parameters and reproduce the notification subscription. The suspend and resume commands would allows a NETCONF client to suspend event notification forwarding without removing the existing subscription information. It could be used for both subscriptions based on persistent and non-persistent subscription information. Operations and > are proposed for this purpose. If event subscription information is now persistent, unsolicited session termination (i.e. other than command was issued. Event forwarding is resumed by sending a to the NETCONF server on a new connection. A.2 Lifecycle Configuration information associated with the event subscription (event classes and filters) could persist beyond the life of the event subscription session. (i.e. it is maintained by the network element as part of its configuration). This configuration information is subject to the behaviour of the datastore it resides in and may or may not persist across re-boots (e.g. it could be part of the running configuration but not the startup configuration). Chisholm, et al. Expires December 23, 2006 [Page 45] Internet-Draft NETCONF Event Notifications June 2006 Appendix B. Event Notifications and Syslog This appendix describes the mapping between syslog message fields and NETCONF event notification fields. The purpose of this mapping is to provide an unambiguous mapping to enable consistent multi-protocol implementations as well as to enable future migration. The second part of the appendix describes an optional capability to embed an entire syslog message (hereafter referred to as syslog message(s) to avoid confusion with the message field in syslog) within a NETCONF event notification. B.1 Leveraging Syslog Field Definitions This section provides a semantic mapping between NETCONF event fields and syslog message fields. ------------------------------------------------------------------- | PRI | HEADER | MESSAGE | ------------------------------------------------------------------- | FACILITY | SEVERITY | TIMESTAMP | HOSTNAME | TAG CONTENT | ------------------------------------------------------------------- Figure 2 - syslog message (RFC3164) ------------------------------------------------------------------- | HEADER | STRUCTURED DATA | MESSAGE | ------------------------------------------------------------------- Figure 3 - syslog message (draft-ietf-syslog-protocol-14.txt) HEADER (Version, Facility, Severity, Truncate, Flag, TimeStamp, HostName, AppName, ProcId, MsgId) STRUCTURED DATA (Zero or more Structured Data Elements - SDEs) MESSAGE ( Text message ) Chisholm, et al. Expires December 23, 2006 [Page 46] Internet-Draft NETCONF Event Notifications June 2006 B.1.1 Field Mapping ------------------------------------------------------ RFC3164 Syslog ID NETCONF Event ------------------------------------------------------ VERSION ------------------------------------------------------ FACILITY FACILITY ------------------------------------------------------ SEVERITY SEVERITY PerceivedSeverity ------------------------------------------------------ TRUNCATE FLAG ------------------------------------------------------ TIMESTAMP TIMESTAMP EventTime ------------------------------------------------------ HOSTNAME HOSTNAME EventOrigin ------------------------------------------------------ TAG APP-NAME EventOrigin ------------------------------------------------------ PROC-ID ------------------------------------------------------ MSG-ID ------------------------------------------------------ CONTENT CONTENT AdditionalText ------------------------------------------------------ Figure 4 - syslog to NETCONF Event field mapping Notes: VERSION: Schema version is found in XML Schema namespace. However, no correspondence to syslog. FACILITY: No well defined semantics for this field. Therefore not used at this time. TRUNCATE: Not applicable. NETCONF events must be complete XML documents therefore cannot be truncated. TIME: TIMESTAMP in syslog ID is derived from RFC3339 but with additional restrictions PROC-ID: No equivalent field CONTENT: This is a free form text field with not defined semantics. The contents of this field may be included in the AdditionalText field. Chisholm, et al. Expires December 23, 2006 [Page 47] Internet-Draft NETCONF Event Notifications June 2006 B.1.2 Severity Mapping The severity value mappings stated in (draft-ietf-syslog-protocol-14) are used: ITU Perceived Severity syslog SEVERITY Critical Alert Major Critical Minor Error Warning Warning Indeterminate Notice Cleared Notice Figure 5. ITU Perceived Severity to syslog SEVERITY mapping. B.2 Syslog within NETCONF Events B.2.1 Motivation The syslog protocol (RFC3164) is widely used by equipment vendors as a means to deliver event messages. Due to the widespread use of syslog as well as a potential phased availability and coverage of NETCONF events by equipment vendors, it is envisioned that users will also follow a phased migration. As a way to facilitate migration and at the same time allow equipment vendors to provide comprehensive event coverage over a NETCONF event subscription session, syslog messages could be embedded in their entirety within the body of a NETCONF event notification. The information provided in this appendix describes a mechanism to leverage syslog messages for the purpose of complementing the available NETCONF event notification set. The intent is to promote the use of the NETCONF interface and not to simply provide a wrapper and additional delivery mechanism for syslog messages. NETCONF events are intended to be well defined and structured, therefore providing an advantage over the unstructured and often times arbitrarily defined syslog messages (i.e. the message field). Covered herein is the syslog protocol as defined in RFC3164 and draft-ietf-syslog-protocol-14.txt. B.2.2 Embedding syslog messages in a NETCONF Event When event notifications are supported, the default behaviour for a NETCONF server is to send NETCONF event notifications over an established event subscription. As an option, the NETCONF server may embed a syslog message in its entirety (e.g. RFC3164 - PRI, Header, and Message fields), placing it within the Event Info field Chisholm, et al. Expires December 23, 2006 [Page 48] Internet-Draft NETCONF Event Notifications June 2006 (SyslogInfo sub-field) - see Figure 1. ______________________________________________________ | NETCONF Event Header | Data | |________________________ |___________________________| | | Event Info | |_________________________|___________________________| | v ____________________________ | Event Fields | SyslogInfo | |___________________________| Figure 1 - Embedding syslog in a NETCONF Event Notifications B.2.3 Supported Forwarding Options Three event forwarding options may be supported by the NETCONF server: a) XML only (mandatory if NETCONF events capability is supported) b) XML and syslog (Optional) c) syslog only (optional) Note to the reader: Option "a" above refers to event notification messages defined for use over the NETCONF protocol. While their use is not necessarily limited to NETCONF protocol, they are referred to as "NETCONF XML-event" in the remainder of this section simply to avoid ambiguity. B.2.3.1 XML and Syslog option - Forwarding Behaviour It is possible, due to coverage, for a given NETCONF implementation to not support a comprehensive set of NETCONF event notifications. Therefore, it is possible for a given event to trigger the generation of a syslog message without a NETCONF-aware counterpart. In such situations, the NETCONF server could form a NETCONF event notification, embed the syslog message in the SyslogInfo field and forward the NETCONF event notifications to all subscribed destinations. Otherwise, both NETCONF event and syslog messages must be included in the Event Info field. B.2.3.2 Event Class Identification The event class field is found in the NETCONF event header information as described in the main body of this document. It conveys information describing what type of event for which the event notification is generated and lets the consumer of the message know what sort of content to expect. NETCONF event notifications which Chisholm, et al. Expires December 23, 2006 [Page 49] Internet-Draft NETCONF Event Notifications June 2006 only contain a syslog message (Options c) must have the EventClass field set to "syslog". The NETCONF client parses the message in the same manner as any other message, finds the normal fields (ie, XML- marked content) not present and either proceeds to parse the SyslogInfo field or hands the syslog message to the entity responsible for processing syslog messages. B.2.3.3 Event Subscription Options A NETCONF client may request subscription to options b) XML and syslog or c) syslog only listed in "Supported Forwarding Options" at subscription time via the user-specified filter. The FILTER or NAMED FILTER parameter in . As previously indicated, the default behaviour is to forward NETCONF XML only event notifications. [Editor's Note: How is this done exactly?] B.2.3.4 Supported Forwarding Option Discovery A potential means for a NETCONF server to convey its feature set support is via capabilities. However, in this particular case, the event content is not a protocol feature therefore other means are needed. A future version of this document will address this issue. Chisholm, et al. Expires December 23, 2006 [Page 50] Internet-Draft NETCONF Event Notifications June 2006 Appendix C. Example Configuration Notifications This non-normative appendix provides a detailed description of a configuration change event notification definition in support of the configuration operations, particularly those defined by the NETCONF protocol. C.1 Types of Configuration Events Configuration event notifications include: o All-triggered Configuration Events o NETCONF-triggered Configuration Events All-triggered Configuration events report on changes from the perspective of the managed resource, rather than the commands which created the configuration change. They are reported regardless of what specific method was used to initiate the change. They indicate that a change has occurred around hardware, software, services or other managed resources within a system. Specific events includes o Resource Added o Resource Removed o Resource Modified NETCONF-triggered events are those which correspond to the execution of explicit NETCONF operations. These include: o copy-config event * This is a data store level event generated following the successful completion of a copy-config operation. This represents the creation of a new configuration file or replacement of an existing one. o delete-config event * This is a data store level event generated following the successful completion of a delete-config operation. This represents the deletion of a configuration file. o edit-config event * This is an event generated following a change in configuration due to an edit-config operation, e.g., due to the completion of Chisholm, et al. Expires December 23, 2006 [Page 51] Internet-Draft NETCONF Event Notifications June 2006 an edit-config operation which successfully changed some part of the configuration. See edit-config error-options (stop-on- error, ignore-error, rollback-on-error) The contents of this event are dependent on the type of operation performed: edit- config (merge, replace, delete, create). This event is not intended to report completely unsuccessful configuration operations. o lock-config event * This is a data store level event generated following the successful locking of a configuration data store. o unlock-config event * This is a data store level event generated following the successful release of a lock previously held on a configuration data store. C.2 Config Event Notification Structure The table below lists the EventInfo parameters for a config event notification. Nomenclature: O - This is marked optional field because it is implementation/ notification category dependent. In some cases this may be user configurable. M - This is a mandatory field that must be included. Dependency on event class may exist as noted below Chisholm, et al. Expires December 23, 2006 [Page 52] Internet-Draft NETCONF Event Notifications June 2006 ----------------------------------------------------- Parameter Name Restrictions ----------------------------------------------------- EventInfo ----------------------------------------------------- EventID O ----------------------------------------------------- ResourceInstance M ----------------------------------------------------- ConfigChangeType M ----------------------------------------------------- TargetDataStore M ----------------------------------------------------- UserInfo O ----------------------------------------------------- UserName ----------------------------------------------------- SourceIndicator ----------------------------------------------------- TransactionId ----------------------------------------------------- CopyConfigInfo -- copy-config only ----------------------------------------------------- DataSource M ----------------------------------------------------- EditConfigInfo -- edit-config only ----------------------------------------------------- EventTime M ----------------------------------------------------- Context O ----------------------------------------------------- EnteredCommand M ----------------------------------------------------- NewConfig M ----------------------------------------------------- MergeReplaceInfo ----------------------------------------------------- OldConfig O ----------------------------------------------------- EventTime M ----------------------------------------------------- EventGenerationTime ----------------------------------------------------- EventSysUpTime ----------------------------------------------------- Chisholm, et al. Expires December 23, 2006 [Page 53] Internet-Draft NETCONF Event Notifications June 2006 C.3 Configuration Event Content The applicability of these fields to other event classes is for further study. C.3.1 Target Datastore Target datastore refers to the data store (startup, candidate, running) which was modified by the management operation. C.3.2 User Info This is used to convey information describing who originated the configuration event and the means for submitting the request. The user info field contains the following information: user Name: User id which was authorized to execute the associated management operation causing the generation of this event. source Indicator: Indicates the method employed to initiate the management operation telnet, NETCONF, console, etc. transaction Id: If available, this field contains a unique identifier for the associated management operation. This is implementation dependent and may require additional information to be communicated between server and client. A possible option is to make use of the message-id in the NETCONF rpc header C.3.3 Data Source The data source is used, for example, in the copy configuration command to indicated the source of information used in the copy operation Applicable Event Classes: configuration (useful for copy-config) C.3.4 Operation Operation is used, for example, in the edit configuration command to indicated the specific operation that has taken place - create, delete, merge, replace. Applicable Event Classes: configuration (useful for edit-config) C.3.5 Context The configuration sub-mode under which the command was executed. Chisholm, et al. Expires December 23, 2006 [Page 54] Internet-Draft NETCONF Event Notifications June 2006 Applicable Event Classes: configuration C.3.6 Entered Command The command entered and executed on the device. C.3.7 New Config The device's configuration following the successful execution of the entered command. Applicable Event Classes: configuration C.3.8 Old Config The configuration prior to the execution of the entered command. Applicable Event Classes: configuration C.3.9 Non-netconf commands in configuration notifications To support legacy implementations and for better integration with other deployed solutions on the box, sending information via netconf about configuration changes that were originated via other solutions, such as command line interfaces is necessary. In order to do this, the information in the message needs to be clearly tagged so that the consumer of the information knows what to expect. In addition, the creation of the subscription needs allow for the client to indicate whether this non-XML formatted information is of interest The latter is done by identifying the XML namespace under which the data syntax/schema is defined. A NETCONF client requests the format in which it wants the NETCONF server to issue the event notifications at subscription time by specifying the appropriate namespace under the Filter parameter in the operation. An example is provided below: Chisholm, et al. Expires December 23, 2006 [Page 55] Internet-Draft NETCONF Event Notifications June 2006 Appendix D. IP Address Schema An IP version 4 address in dotted notation decimal. Example: 15.13.120.22 An IP version 6 address in colon separated 2 byte block hexadecimal notation. Example: FEDC:AB19:12FE:0234:98EF:1178:8891:CAFF Chisholm, et al. Expires December 23, 2006 [Page 56] Internet-Draft NETCONF Event Notifications June 2006 Chisholm, et al. Expires December 23, 2006 [Page 57] Internet-Draft NETCONF Event Notifications June 2006 Intellectual Property Statement The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. The IETF has been notified of intellectual property rights claimed in regard to some or all of the specification contained in this document. For more information consult the online list of claimed rights. Disclaimer of Validity This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Copyright Statement Copyright (C) The Internet Society (2006). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. Chisholm, et al. Expires December 23, 2006 [Page 58] Internet-Draft NETCONF Event Notifications June 2006 Acknowledgment Funding for the RFC Editor function is currently provided by the Internet Society. Chisholm, et al. Expires December 23, 2006 [Page 59]