Web Authorization Protocol A. Parecki Internet-Draft Okta Intended status: Best Current Practice D. Waite Expires: 17 March 2023 Ping Identity 13 September 2022 OAuth 2.0 for Browser-Based Apps draft-ietf-oauth-browser-based-apps-11 Abstract This specification details the security considerations and best practices that must be taken into account when developing browser- based applications that use OAuth 2.0. Discussion Venues This note is to be removed before publishing as an RFC. Discussion of this document takes place on the Web Authorization Protocol Working Group mailing list (oauth@ietf.org), which is archived at https://mailarchive.ietf.org/arch/browse/oauth/. Source for this draft and an issue tracker can be found at https://github.com/oauth-wg/oauth-browser-based-apps. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 17 March 2023. Copyright Notice Copyright (c) 2022 IETF Trust and the persons identified as the document authors. All rights reserved. Parecki & Waite Expires 17 March 2023 [Page 1] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Notational Conventions . . . . . . . . . . . . . . . . . . . 3 3. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 3 4. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 4 5. First-Party Applications . . . . . . . . . . . . . . . . . . 5 6. Application Architecture Patterns . . . . . . . . . . . . . . 6 6.1. Single-Domain Browser-Based Apps (not using OAuth) . . . 6 6.2. Backend For Frontend (BFF) Proxy . . . . . . . . . . . . 7 6.2.1. Security considerations . . . . . . . . . . . . . . . 9 6.3. Token Mediating Backend . . . . . . . . . . . . . . . . . 9 6.3.1. Security Considerations . . . . . . . . . . . . . . . 11 6.4. JavaScript Applications obtaining tokens directly . . . . 11 6.4.1. Storing Tokens in Local or Session Storage . . . . . 13 6.4.2. Service Worker as the OAuth Client . . . . . . . . . 13 7. Authorization Code Flow . . . . . . . . . . . . . . . . . . . 15 7.1. Initiating the Authorization Request from a Browser-Based Application . . . . . . . . . . . . . . . . . . . . . . . 15 7.2. Handling the Authorization Code Redirect . . . . . . . . 16 8. Refresh Tokens . . . . . . . . . . . . . . . . . . . . . . . 16 9. Security Considerations . . . . . . . . . . . . . . . . . . . 17 9.1. Cross-Site Scripting Attacks (XSS) . . . . . . . . . . . 17 9.2. Reducing the Impact of Token Exfiltration . . . . . . . . 18 9.3. Registration of Browser-Based Apps . . . . . . . . . . . 18 9.4. Client Authentication . . . . . . . . . . . . . . . . . . 18 9.5. Client Impersonation . . . . . . . . . . . . . . . . . . 19 9.6. Cross-Site Request Forgery Protections . . . . . . . . . 19 9.7. Authorization Server Mix-Up Mitigation . . . . . . . . . 19 9.8. Cross-Domain Requests . . . . . . . . . . . . . . . . . . 20 9.9. Content Security Policy . . . . . . . . . . . . . . . . . 20 9.10. OAuth Implicit Flow . . . . . . . . . . . . . . . . . . . 21 9.10.1. Attacks on the Implicit Flow . . . . . . . . . . . . 21 9.10.2. Countermeasures . . . . . . . . . . . . . . . . . . 22 9.10.3. Disadvantages of the Implicit Flow . . . . . . . . . 22 9.10.4. Historic Note . . . . . . . . . . . . . . . . . . . 23 9.11. Additional Security Considerations . . . . . . . . . . . 24 10. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 24 11. References . . . . . . . . . . . . . . . . . . . . . . . . . 24 Parecki & Waite Expires 17 March 2023 [Page 2] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 11.1. Normative References . . . . . . . . . . . . . . . . . . 24 11.2. Informative References . . . . . . . . . . . . . . . . . 25 Appendix A. Server Support Checklist . . . . . . . . . . . . . . 25 Appendix B. Document History . . . . . . . . . . . . . . . . . . 26 Appendix C. Acknowledgements . . . . . . . . . . . . . . . . . . 29 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 29 1. Introduction This specification describes the current best practices for implementing OAuth 2.0 authorization flows in applications executing in a browser. For native application developers using OAuth 2.0 and OpenID Connect, an IETF BCP (best current practice) was published that guides integration of these technologies. This document is formally known as [RFC8252] or BCP 212, but nicknamed "AppAuth" after the OpenID Foundation-sponsored set of libraries that assist developers in adopting these practices. [RFC8252] makes specific recommendations for how to securely implement OAuth in native applications, including incorporating additional OAuth extensions where needed. OAuth 2.0 for Browser-Based Apps addresses the similarities between implementing OAuth for native apps and browser-based apps, and includes additional considerations when running in a browser. This is primarily focused on OAuth, except where OpenID Connect provides additional considerations. Many of these recommendations are derived from the OAuth 2.0 Security Best Current Practice [oauth-security-topics] and browser-based apps are expected to follow those recommendations as well. This draft expands on and further restricts various recommendations in [oauth-security-topics]. 2. Notational Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. 3. Terminology In addition to the terms defined in referenced specifications, this document uses the following terms: "OAuth": In this document, "OAuth" refers to OAuth 2.0, [RFC6749] and [RFC6750]. Parecki & Waite Expires 17 March 2023 [Page 3] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 "Browser-based application": An application that is dynamically downloaded and executed in a web browser, usually written in JavaScript. Also sometimes referred to as a "single-page application", or "SPA". 4. Overview At the time that OAuth 2.0 [RFC6749] and [RFC6750] were created, browser-based JavaScript applications needed a solution that strictly complied with the same-origin policy. Common deployments of OAuth 2.0 involved an application running on a different domain than the authorization server, so it was historically not possible to use the Authorization Code flow which would require a cross-origin POST request. This was one of the motivations for the definition of the Implicit flow, which returns the access token in the front channel via the fragment part of the URL, bypassing the need for a cross- origin POST request. However, there are several drawbacks to the Implicit flow, generally involving vulnerabilities associated with the exposure of the access token in the URL. See Section 9.10 for an analysis of these attacks and the drawbacks of using the Implicit flow in browsers. Additional attacks and security considerations can be found in [oauth-security-topics]. In recent years, widespread adoption of Cross-Origin Resource Sharing (CORS), which enables exceptions to the same-origin policy, allows browser-based apps to use the OAuth 2.0 Authorization Code flow and make a POST request to exchange the authorization code for an access token at the token endpoint. In this flow, the access token is never exposed in the less-secure front channel. Furthermore, adding PKCE to the flow ensures that even if an authorization code is intercepted, it is unusable by an attacker. For this reason, and from other lessons learned, the current best practice for browser-based applications is to use the OAuth 2.0 Authorization Code flow with PKCE. Browser-based applications: * MUST use the OAuth 2.0 Authorization Code flow with the PKCE extension when obtaining an access token * MUST Protect themselves against CSRF attacks by either: - ensuring the authorization server supports PKCE, or Parecki & Waite Expires 17 March 2023 [Page 4] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 - by using the OAuth 2.0 "state" parameter or the OpenID Connect "nonce" parameter to carry one-time use CSRF tokens * MUST Register one or more redirect URIs, and use only exact registered redirect URIs in authorization requests OAuth 2.0 authorization servers supporting browser-based applications: * MUST Require exact matching of registered redirect URIs * MUST Support the PKCE extension * MUST NOT issue access tokens in the authorization response * If issuing refresh tokens to browser-based applications, then: - MUST rotate refresh tokens on each use or use sender- constrained refresh tokens, and - MUST set a maximum lifetime on refresh tokens or expire if they are not used in some amount of time 5. First-Party Applications While OAuth was initially created to allow third-party applications to access an API on behalf of a user, it has proven to be useful in a first-party scenario as well. First-party apps are applications where the same organization provides both the API and the application. Examples of first-party applications are a web email client provided by the operator of the email account, or a mobile banking application created by bank itself. (Note that there is no requirement that the application actually be developed by the same company; a mobile banking application developed by a contractor that is branded as the bank's application is still considered a first-party application.) The first-party app consideration is about the user's relationship to the application and the service. To conform to this best practice, first-party applications using OAuth or OpenID Connect MUST use a redirect-based flow (such as the OAuth Authorization Code flow) as described later in this document. The resource owner password credentials grant MUST NOT be used, as described in [oauth-security-topics] Section 2.4. Instead, by using the Authorization Code flow and redirecting the user to the authorization server, this provides the authorization server the Parecki & Waite Expires 17 March 2023 [Page 5] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 opportunity to prompt the user for multi-factor authentication options, take advantage of single sign-on sessions, or use third- party identity providers. In contrast, the resource owner password credentials grant does not provide any built-in mechanism for these, and would instead be extended with custom code. 6. Application Architecture Patterns Here are the main architectural patterns available when building browser-based applications. * single-domain, not using OAuth * a JavaScript application with a stateful backend component - storing tokens and proxying all requests (BFF Proxy) - obtaining tokens and passing them to the frontend (Token Mediating Backend) * a JavaScript application obtaining access tokens - via JavaScript code executed in the DOM - through a service worker These architectures have different use cases and considerations. 6.1. Single-Domain Browser-Based Apps (not using OAuth) For simple system architectures, such as when the JavaScript application is served from a domain that can share cookies with the domain of the API (resource server) and the authorization server, OAuth adds additional attack vectors that could be avoided with a different solution. In particular, using any redirect-based mechanism of obtaining an access token enables the redirect-based attacks described in [oauth-security-topics] Section 4, but if the application, authorization server and resource server share a domain, then it is unnecessary to use a redirect mechanism to communicate between them. An additional concern with handling access tokens in a browser is that in case of successful cross-site scripting (XSS) attack, tokens could be read and further used or transmitted by the injected code if no secure storage mechanism is in place. Parecki & Waite Expires 17 March 2023 [Page 6] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 As such, it could be considered to use an HTTP-only cookie between the JavaScript application and API so that the JavaScript code can't access the cookie value itself. The Secure cookie attribute should be used to ensure the cookie is not included in unencrypted HTTP requests. Additionally, the SameSite cookie attribute can be used to counter some CSRF attacks, but should not be considered the extent of the CSRF protection, as described in [draft-ietf-httpbis-rfc6265bis] OAuth was originally created for third-party or federated access to APIs, so it may not be the best solution in a common-domain deployment. That said, there are still some advantages in using OAuth even in a common-domain architecture: * Allows more flexibility in the future, such as if you were to later add a new domain to the system. With OAuth already in place, adding a new domain wouldn't require any additional rearchitecting. * Being able to take advantage of existing library support rather than writing bespoke code for the integration. * Centralizing login and multifactor support, account management, and recovery at the OAuth server, rather than making it part of the application logic. * Splitting of responsibilities between authenticating a user and serving resources Using OAuth for browser-based apps in a first-party same-domain scenario provides these advantages, and can be accomplished by any of the architectural patterns described below. 6.2. Backend For Frontend (BFF) Proxy Parecki & Waite Expires 17 March 2023 [Page 7] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 +-------------+ +--------------+ +---------------+ | | | | | | |Authorization| | Token | | Resource | | Endpoint | | Endpoint | | Server | | | | | | | +-------------+ +--------------+ +---------------+ ^ ^ ^ | (D)| (G)| | v v | | +--------------------------------------+ | | | | | Backend for Frontend Proxy (BFF) | (B)| | | | +--------------------------------------+ | | ^ ^ + ^ + | (A)| (C)| (E)| (F)| |(H) v v + v + v +-------------------------------------------------+ | | | Browser | | | +-------------------------------------------------+ In this architecture, commonly referred to as "backend for frontend" or "BFF", the JavaScript code is loaded from a dynamic BFF Proxy (A) that has the ability to execute code and handle the full authentication flow itself. This enables the ability to keep the call to actually get an access token outside the JavaScript application. Note that this BFF Proxy is not the Resource Server, it is the OAuth client and would be accessing data at a separate resource server. In this case, the BFF Proxy initiates the OAuth flow itself, by redirecting the browser to the authorization endpoint (B). When the user is redirected back, the browser delivers the authorization code to the BFF Proxy (C), where it can then exchange it for an access token at the token endpoint (D) using its client secret and PKCE code verifier. The BFF Proxy then keeps the access token and refresh token stored internally, and creates a separate session with the browser-based app via a traditional browser cookie (E). Parecki & Waite Expires 17 March 2023 [Page 8] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 When the JavaScript application in the browser wants to make a request to the Resource Server, it instead makes the request to the BFF Proxy (F), and the BFF Proxy will make the request with the access token to the Resource Server (G), and forward the response (H) back to the browser. (Common examples of this architecture are an Angular front-end with a .NET backend, or a React front-end with a Spring Boot backend.) The BFF Proxy SHOULD be considered a confidential client, and issued its own client secret. The BFF Proxy SHOULD use the OAuth 2.0 Authorization Code grant with PKCE to initiate a request for an access token. Detailed recommendations for confidential clients can be found in [oauth-security-topics] Section 2.1.1. In this scenario, the connection between the browser and BFF Proxy SHOULD be a session cookie provided by the BFF Proxy. 6.2.1. Security considerations Security of the connection between code running in the browser and this BFF Proxy is assumed to utilize browser-level protection mechanisms. Details are out of scope of this document, but many recommendations can be found in the OWASP Cheat Sheet series (https://cheatsheetseries.owasp.org/), such as setting an HTTP-only and Secure cookie to authenticate the session between the browser and BFF Proxy. Additionally, cookies MUST be protected from leakage by other means, such as logs. In this architecture, tokens are never sent to the front-end and are never accessible by any JavaScript code, so it fully protects against XSS attackers stealing tokens. However, an XSS attacker may still be able to make authenticated requests to the BFF Proxy which will in turn make requests to the resource server including the user's legitimate token. While the attacker is unable to extract and use the access token elsewhere, they can still effectively make authenticated requests to the resource server. 6.3. Token Mediating Backend An alternative to a full BFF where all resource requests go through the backend is to use a token mediating backend which obtains the tokens and then forwards the tokens to the browser. Parecki & Waite Expires 17 March 2023 [Page 9] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 +-------------+ +--------------+ +---------------+ | | | | | | |Authorization| | Token | | Resource | | Endpoint | | Endpoint | | Server | | | | | | | +-------------+ +--------------+ +---------------+ ^ ^ ^ | (D)| | | v | | | | +-------------------------+ | | | | | | | Token Mediating Backend | | (B)| | | | | +-------------------------+ | | | | ^ ^ + | | (A)| (C)| (E)| (F)| v v + v + +-------------------------------------------------+ | | | Browser | | | +-------------------------------------------------+ The frontend code makes a request to the Token Mediating Backend (A), and the backend initiates the OAuth flow itself, by redirecting the browser to the authorization endpoint (B). When the user is redirected back, the browser delivers the authorization code to the application server (C), where it can then exchange it for an access token at the token endpoint (D) using its client secret and PKCE code verifier. The backend delivers the tokens to the browser (E), which stores them for later use. The browser makes requests to the resource server directly (F) including the token it has stored. The main advantage this architecture provides over the full BFF architecture previously described is that the backend service is only involved in the acquisition of tokens, and doesn't have to proxy every request in the future. Routing every API call through a backend can be expensive in terms of performance and latency, and can create challenges in deploying the application across many regions. Instead, routing only the token acquisition through a backend means fewer requests are made to the backend. This improves the performance and reduces the latency of requests from the frontend, and reduces the amount of infrastructure needed in the backend. Parecki & Waite Expires 17 March 2023 [Page 10] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 Similar to the previously described BFF Proxy pattern, The Token Mediating Backend SHOULD be considered a confidential client, and issued its own client secret. The Token Mediating Backend SHOULD use the OAuth 2.0 Authorization Code grant with PKCE to initiate a request for an access token. Detailed recommendations for confidential clients can be found in [oauth-security-topics] Section 2.1.1. In this scenario, the connection between the browser and Token Mediating Backend SHOULD be a session cookie provided by the backend. The Token Mediating Backend SHOULD cache tokens it obtains from the authorization server such that when the frontend needs to obtain new tokens, it can do so without the additional round trip to the authorization server if the tokens are still valid. The frontend SHOULD NOT persist tokens in local storage or similar mechanisms; instead, the frontend SHOULD store tokens only in memory, and make a new request to the backend if no tokens exist. This provides fewer attack vectors for token exfiltration should an XSS attack be successful. Editor's Note: A method of implementing this architecture is described by the [tmi-bff] draft, although it is currently an expired individual draft and has not been proposed for adoption to the OAuth Working Group. 6.3.1. Security Considerations If the backend caches tokens from the authorization server, it presents scopes elevation risks if applied indiscriminately. If the token cached by the authorization server features a superset of the scopes requested by the frontend, the backend SHOULD NOT return it to the frontend; instead it SHOULD perform a new request with the smaller set of scopes to the authorization server. In the case of a successful XSS attack, the attacker may be able to access the tokens if the tokens are persisted in the frontend, but is less likely to be able to access the tokens if they are stored only in memory. However, a successful XSS attack will also allow the attacker to call the Token Mediating Backend itself to retrieve the cached token or start a new OAuth flow. 6.4. JavaScript Applications obtaining tokens directly This section describes the architecture of a JavaScript application obtaining tokens from the authorization itself, with no intermediate proxy server. Parecki & Waite Expires 17 March 2023 [Page 11] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 +---------------+ +--------------+ | | | | | Authorization | | Resource | | Server | | Server | | | | | +---------------+ +--------------+ ^ ^ ^ + | | | | |(B) |(C) |(D) |(E) | | | | | | | | + v + v +-----------------+ +-------------------------------+ | | (A) | | | Static Web Host | +-----> | Browser | | | | | +-----------------+ +-------------------------------+ In this architecture, the JavaScript code is first loaded from a static web host into the browser (A), and the application then runs in the browser. This application is considered a public client, since there is no way to issue it a client secret in this model. The code in the browser initiates the Authorization Code flow with the PKCE extension (described in Section 7) (B) above, and obtains an access token via a POST request (C). The application is then responsible for storing the access token (and optional refresh token) as securely as possible using appropriate browser APIs. When the JavaScript application in the browser wants to make a request to the Resource Server, it can interact with the Resource Server directly. It includes the access token in the request (D) and receives the Resource Server's response (E). In this scenario, the Authorization Server and Resource Server MUST support the necessary CORS headers to enable the JavaScript code to make these POST requests from the domain on which the script is executing. (See Section 9.8 for additional details.) Parecki & Waite Expires 17 March 2023 [Page 12] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 Besides the general risks of XSS, if tokens are stored or handled by the browser, XSS poses an additional risk of token exfiltration. In this architecture, the JavaScript application is storing the access token so that it can make requests directly to the resource server. There are two primary methods by which the application can store the token, with different security considerations of each. 6.4.1. Storing Tokens in Local or Session Storage If the JavaScript in the DOM will be making requests directly to the resource server, the simplest mechanism is to store the tokens somewhere accessible to the DOM. In case of a successful XSS attack, the injected code will have full access to the stored tokens and can exfiltrate them to the attacker. 6.4.2. Service Worker as the OAuth Client In this scenario, a Service Worker (https://developer.mozilla.org/en- US/docs/Web/API/Service_Worker_API) is responsible for obtaining tokens from the authorization server and making requests to the resource server. Service workers are run in a separate context from the DOM, have no access to the DOM, and the DOM has no access to the service worker. This makes service workers the most secure place to store tokens, as an XSS attack is unable to exfiltrate the tokens. In this architecture, a service worker intercepts calls from the frontend to the resource server. As such, it completely isolates calls to the authorization server from XSS attack surface, as all tokens are safely kept in the service worker context without any access from other JavaScript contexts. The service worker is then solely responsible for adding the token in the authorization header to calls to the resource server. Parecki & Waite Expires 17 March 2023 [Page 13] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 Resource Authorization User Application Service Worker server server | browse | | | | | ------------>| | | | | |-------------------> | /authorize | | | --------------------------------------------------------> | | | redirect w/ authorization code | | | < - - - - - - - - - - - - - - - - - - - - - - - - - - - | | | | | | | | | token request w/ auth code | /token | | | | ------------------------------------------------------> | | | <- - - - - - - - - - - - - - - - - - - - - - - - - - -| | | | | | | | resource request | | | | |-------------------> resource request with token | | | | | ---------------------------->| | | | | | | User Application Service Worker Resource Authorization server server 6.4.2.1. Implementation Guidelines * The service worker MUST initiate the OAuth 2.0 Authorization Code grant with PKCE itself. * The service worker MUST intercept the authorization code when the _authorization server_ redirects to the application. * The service worker implementation MUST then initiate the token request itself. * The service worker MUST not transmit tokens, authorization codes or PKCE secrets (e.g. code verifier) to the frontend application. * The service worker MUST block authorization requests and token requests initiating from the frontend application in order to avoid any front-end side-channel for getting credentials: the only way of starting the authorization flow is through the service worker. This protects against re-authorization from XSS-injected code. * The application MUST register the Service Worker before running any code interacting with the user. Parecki & Waite Expires 17 March 2023 [Page 14] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 6.4.2.2. Security Considerations A successful XSS attack on an application using this Service Worker pattern would be unable to exfiltrate existing tokens stored by the application. However, an XSS attacker may still be able to cause the Service Worker to make authenticated requests to the resource server including the user's legitimate token. In case of a vulnerability leading to the Service Worker not being registered, an XSS attack would result in the attacker being able to initiate a new OAuth flow to obtain new tokens itself. To prevent the Service Worker from being unregistered, the Service Worker registration must happen as first step of the application start, and before any user interaction. Starting the Service worker before the rest of the application, and the fact that there is no way to remove a Service Worker from an active application (https://www.w3.org/TR/service-workers/#navigator-service-worker- unregister), reduces the risk of an XSS attack being able to prevent the Service Worker from being registered. 7. Authorization Code Flow Browser-based applications that are public clients and use the Authorization Code grant type described in Section 4.1 of OAuth 2.0 [RFC6749] MUST also follow these additional requirements described in this section. 7.1. Initiating the Authorization Request from a Browser-Based Application Browser-based applications that are public clients MUST implement the Proof Key for Code Exchange (PKCE [RFC7636]) extension when obtaining an access token, and authorization servers MUST support and enforce PKCE for such clients. The PKCE extension prevents an attack where the authorization code is intercepted and exchanged for an access token by a malicious client, by providing the authorization server with a way to verify the client instance that exchanges the authorization code is the same one that initiated the flow. Browser-based applications MUST prevent CSRF attacks against their redirect URI. This can be accomplished by any of the below: * using PKCE, and confirming that the authorization server supports PKCE Parecki & Waite Expires 17 March 2023 [Page 15] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 * using a unique value for the OAuth 2.0 "state" parameter * if the application is using OpenID Connect, by using the OpenID Connect "nonce" parameter 7.2. Handling the Authorization Code Redirect Authorization servers MUST require an exact match of a registered redirect URI. As described in [oauth-security-topics] Section 4.1.1. this helps to prevent attacks targeting the authorization code. 8. Refresh Tokens Refresh tokens provide a way for applications to obtain a new access token when the initial access token expires. With public clients, the risk of a leaked refresh token is greater than leaked access tokens, since an attacker may be able to continue using the stolen refresh token to obtain new access tokens potentially without being detectable by the authorization server. Javascript-accessible storage mechanisms like _Local Storage_ provide an attacker with several opportunities by which a refresh token can be leaked, just as with access tokens. As such, these mechanisms are considered a higher risk for handling refresh tokens. Authorization servers may choose whether or not to issue refresh tokens to browser-based applications. [oauth-security-topics] describes some additional requirements around refresh tokens on top of the recommendations of [RFC6749]. Applications and authorization servers conforming to this BCP MUST also follow the recommendations in [oauth-security-topics] around refresh tokens if refresh tokens are issued to browser-based applications. In particular, authorization servers: * MUST either rotate refresh tokens on each use OR use sender- constrained refresh tokens as described in [oauth-security-topics] Section 4.13.2 * MUST either set a maximum lifetime on refresh tokens OR expire if the refresh token has not been used within some amount of time * MUST NOT extend the lifetime of the new refresh token beyond the lifetime of the initial refresh token Parecki & Waite Expires 17 March 2023 [Page 16] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 * upon issuing a rotated refresh token, MUST NOT extend the lifetime of the new refresh token beyond the lifetime of the initial refresh token if the refresh token has a preestablished expiration time For example: * A user authorizes an application, issuing an access token that lasts 1 hour, and a refresh token that lasts 24 hours * After 1 hour, the initial access token expires, so the application uses the refresh token to get a new access token * The authorization server returns a new access token that lasts 1 hour, and a new refresh token that lasts 23 hours * This continues until 24 hours pass from the initial authorization * At this point, when the application attempts to use the refresh token after 24 hours, the request will fail and the application will have to involve the user in a new authorization request By limiting the overall refresh token lifetime to the lifetime of the initial refresh token, this ensures a stolen refresh token cannot be used indefinitely. Authorization servers MAY set different policies around refresh token issuance, lifetime and expiration for browser-based applications compared to other public clients. 9. Security Considerations 9.1. Cross-Site Scripting Attacks (XSS) For all known architectures, all precautions MUST be taken to prevent cross-site scripting (XSS) attacks. In general, XSS attacks are a huge risk, and can lead to full compromise of the application. If tokens are handled or accessible by the browser, there is a risk that a XSS attack can lead to token exfiltration. Even if tokens are never sent to the frontend and are never accessible by any JavaScript code, an XSS attacker may still be able to make authenticated requests to the resource server by mimicking legitimate code in the DOM. For example, the attacker may make a request to the BFF Proxy which will in turn make requests to the resource server including the user's legitimate token. In the Service Worker example, the attacker may make an API call to the Parecki & Waite Expires 17 March 2023 [Page 17] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 Service Worker which will then turn around and make a request to the resource server with the legitimate token. While the attacker is unable to extract and use the access token elsewhere, they can still effectively make authenticated requests to the resource server to steal or modify data. 9.2. Reducing the Impact of Token Exfiltration If tokens are ever accessible to the browser or to any JavaScript code, there is always a risk of token exfiltration. The particular risk may change depending on the architecture chosen. Regardless of the particular architecture chosen, these additional security considerations limit the impact of token exfiltration: * The authorization server SHOULD restrict access tokens to strictly needed resources, to avoid escalating the scope of the attack. * To avoid information disclosure from ID Tokens, the authorization server SHOULD NOT include any ID token claims that aren't used by the frontend. * Refresh tokens should be used in accordance with the guidance in Section 8. 9.3. Registration of Browser-Based Apps Browser-based applications (with no backend) are considered public clients as defined by Section 2.1 of OAuth 2.0 [RFC6749], and MUST be registered with the authorization server as such. Authorization servers MUST record the client type in the client registration details in order to identify and process requests accordingly. Authorization servers MUST require that browser-based applications register one or more redirect URIs. 9.4. Client Authentication Since a browser-based application's source code is delivered to the end-user's browser, it cannot contain provisioned secrets. As such, a browser-based app with native OAuth support is considered a public client as defined by Section 2.1 of OAuth 2.0 [RFC6749]. Parecki & Waite Expires 17 March 2023 [Page 18] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 Secrets that are statically included as part of an app distributed to multiple users should not be treated as confidential secrets, as one user may inspect their copy and learn the shared secret. For this reason, and those stated in Section 5.3.1 of [RFC6819], it is NOT RECOMMENDED for authorization servers to require client authentication of browser-based applications using a shared secret, as this serves little value beyond client identification which is already provided by the client_id request parameter. Authorization servers that still require a statically included shared secret for SPA clients MUST treat the client as a public client, and not accept the secret as proof of the client's identity. Without additional measures, such clients are subject to client impersonation (see Section 9.5 below). 9.5. Client Impersonation As stated in Section 10.2 of OAuth 2.0 [RFC6749], the authorization server SHOULD NOT process authorization requests automatically without user consent or interaction, except when the identity of the client can be assured. If authorization servers restrict redirect URIs to a fixed set of absolute HTTPS URIs, preventing the use of wildcard domains, wildcard paths, or wildcard query string components, this exact match of registered absolute HTTPS URIs MAY be accepted by authorization servers as proof of identity of the client for the purpose of deciding whether to automatically process an authorization request when a previous request for the client_id has already been approved. 9.6. Cross-Site Request Forgery Protections Clients MUST prevent Cross-Site Request Forgery (CSRF) attacks against their redirect URI. Clients can accomplish this by either ensuring the authorization server supports PKCE and relying on the CSRF protection that PKCE provides, or if the client is also an OpenID Connect client, using the OpenID Connect "nonce" parameter, or by using the "state" parameter to carry one-time-use CSRF tokens as described in Section 7.1. See Section 2.1 of [oauth-security-topics] for additional details. 9.7. Authorization Server Mix-Up Mitigation Authorization server mix-up attacks mark a severe threat to every client that supports at least two authorization servers. To conform to this BCP such clients MUST apply countermeasures to defend against mix-up attacks. Parecki & Waite Expires 17 March 2023 [Page 19] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 It is RECOMMENDED to defend against mix-up attacks by identifying and validating the issuer of the authorization response. This can be achieved either by using the "iss" response parameter, as defined in [oauth-iss-auth-resp], or by using the "iss" Claim of the ID token when OpenID Connect is used. Alternative countermeasures, such as using distinct redirect URIs for each issuer, SHOULD only be used if identifying the issuer as described is not possible. Section 4.4 of [oauth-security-topics] provides additional details about mix-up attacks and the countermeasures mentioned above. 9.8. Cross-Domain Requests To complete the Authorization Code flow, the browser-based application will need to exchange the authorization code for an access token at the token endpoint. If the authorization server provides additional endpoints to the application, such as metadata URLs, dynamic client registration, revocation, introspection, discovery or user info endpoints, these endpoints may also be accessed by the browser-based app. Since these requests will be made from a browser, authorization servers MUST support the necessary CORS headers (defined in [Fetch]) to allow the browser to make the request. This specification does not include guidelines for deciding whether a CORS policy for the token endpoint should be a wildcard origin or more restrictive. Note, however, that the browser will attempt to GET or POST to the API endpoint before knowing any CORS policy; it simply hides the succeeding or failing result from JavaScript if the policy does not allow sharing. 9.9. Content Security Policy A browser-based application that wishes to use either long-lived refresh tokens or privileged scopes SHOULD restrict its JavaScript execution to a set of statically hosted scripts via a Content Security Policy ([CSP2]) or similar mechanism. A strong Content Security Policy can limit the potential attack vectors for malicious JavaScript to be executed on the page. Parecki & Waite Expires 17 March 2023 [Page 20] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 9.10. OAuth Implicit Flow The OAuth 2.0 Implicit flow (defined in Section 4.2 of OAuth 2.0 [RFC6749]) works by the authorization server issuing an access token in the authorization response (front channel) without the code exchange step. In this case, the access token is returned in the fragment part of the redirect URI, providing an attacker with several opportunities to intercept and steal the access token. Authorization servers MUST NOT issue access tokens in the authorization response, and MUST issue access tokens only from the token endpoint. 9.10.1. Attacks on the Implicit Flow Many attacks on the Implicit flow described by [RFC6819] and Section 4.1.2 of [oauth-security-topics] do not have sufficient mitigation strategies. The following sections describe the specific attacks that cannot be mitigated while continuing to use the Implicit flow. 9.10.1.1. Threat: Manipulation of the Redirect URI If an attacker is able to cause the authorization response to be sent to a URI under their control, they will directly get access to the authorization response including the access token. Several methods of performing this attack are described in detail in [oauth-security-topics]. 9.10.1.2. Threat: Access Token Leak in Browser History An attacker could obtain the access token from the browser's history. The countermeasures recommended by [RFC6819] are limited to using short expiration times for tokens, and indicating that browsers should not cache the response. Neither of these fully prevent this attack, they only reduce the potential damage. Additionally, many browsers now also sync browser history to cloud services and to multiple devices, providing an even wider attack surface to extract access tokens out of the URL. This is discussed in more detail in Section 4.3.2 of [oauth-security-topics]. Parecki & Waite Expires 17 March 2023 [Page 21] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 9.10.1.3. Threat: Manipulation of Scripts An attacker could modify the page or inject scripts into the browser through various means, including when the browser's HTTPS connection is being intercepted by, for example, a corporate network. While man-in-the-middle attacks are typically out of scope of basic security recommendations to prevent, in the case of browser-based apps they are much easier to perform. An injected script can enable an attacker to have access to everything on the page. The risk of a malicious script running on the page may be amplified when the application uses a known standard way of obtaining access tokens, namely that the attacker can always look at the window.location variable to find an access token. This threat profile is different from an attacker specifically targeting an individual application by knowing where or how an access token obtained via the Authorization Code flow may end up being stored. 9.10.1.4. Threat: Access Token Leak to Third-Party Scripts It is relatively common to use third-party scripts in browser-based apps, such as analytics tools, crash reporting, and even things like a Facebook or Twitter "like" button. In these situations, the author of the application may not be able to be fully aware of the entirety of the code running in the application. When an access token is returned in the fragment, it is visible to any third-party scripts on the page. 9.10.2. Countermeasures In addition to the countermeasures described by [RFC6819] and [oauth-security-topics], using the Authorization Code flow with PKCE extension prevents the attacks described above by avoiding returning the access token in the redirect response at all. When PKCE is used, if an authorization code is stolen in transport, the attacker is unable to do anything with the authorization code. 9.10.3. Disadvantages of the Implicit Flow There are several additional reasons the Implicit flow is disadvantageous compared to using the standard Authorization Code flow. Parecki & Waite Expires 17 March 2023 [Page 22] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 * OAuth 2.0 provides no mechanism for a client to verify that a particular access token was intended for that client, which could lead to misuse and possible impersonation attacks if a malicious party hands off an access token it retrieved through some other means to the client. * Returning an access token in the front-channel redirect gives the authorization server no assurance that the access token will actually end up at the application, since there are many ways this redirect may fail or be intercepted. * Supporting the Implicit flow requires additional code, more upkeep and understanding of the related security considerations, while limiting the authorization server to just the Authorization Code flow reduces the attack surface of the implementation. * If the JavaScript application gets wrapped into a native app, then [RFC8252] also requires the use of the Authorization Code flow with PKCE anyway. In OpenID Connect, the ID Token is sent in a known format (as a JWT), and digitally signed. Returning an ID token using the Implicit flow (response_type=id_token) requires the client validate the JWT signature, as malicious parties could otherwise craft and supply fraudulent ID tokens. Performing OpenID Connect using the Authorization Code flow provides the benefit of the client not needing to verify the JWT signature, as the ID token will have been fetched over an HTTPS connection directly from the authorization server. Additionally, in many cases an application will request both an ID token and an access token, so it is simplier and provides fewer attack vectors to obtain both via the Authorization Code flow. 9.10.4. Historic Note Historically, the Implicit flow provided an advantage to browser- based apps since JavaScript could always arbitrarily read and manipulate the fragment portion of the URL without triggering a page reload. This was necessary in order to remove the access token from the URL after it was obtained by the app. Modern browsers now have the Session History API (described in "Session history and navigation" of [HTML]), which provides a mechanism to modify the path and query string component of the URL without triggering a page reload. This means modern browser-based apps can use the unmodified OAuth 2.0 Authorization Code flow, since they have the ability to remove the authorization code from the query string without triggering a page reload thanks to the Session History API. Parecki & Waite Expires 17 March 2023 [Page 23] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 9.11. Additional Security Considerations The OWASP Foundation (https://www.owasp.org/) maintains a set of security recommendations and best practices for web applications, and it is RECOMMENDED to follow these best practices when creating an OAuth 2.0 Browser-Based application. 10. IANA Considerations This document does not require any IANA actions. 11. References 11.1. Normative References [CSP2] West, M., "Content Security Policy", October 2018. [draft-ietf-httpbis-rfc6265bis] Chen, L., Englehardt, S., West, M., and J. Wilander, "Cookies: HTTP State Management Mechanism", October 2021. [Fetch] whatwg, "Fetch", 2018. [oauth-iss-auth-resp] Meyer zu Selhausen, K. and D. Fett, "OAuth 2.0 Authorization Server Issuer Identifier in Authorization Response", January 2021. [oauth-security-topics] Lodderstedt, T., Bradley, J., Labunets, A., and D. Fett, "OAuth 2.0 Security Best Current Practice", April 2021. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC6749] Hardt, D., Ed., "The OAuth 2.0 Authorization Framework", RFC 6749, DOI 10.17487/RFC6749, October 2012, . [RFC6750] Jones, M. and D. Hardt, "The OAuth 2.0 Authorization Framework: Bearer Token Usage", RFC 6750, DOI 10.17487/RFC6750, October 2012, . Parecki & Waite Expires 17 March 2023 [Page 24] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 [RFC6819] Lodderstedt, T., Ed., McGloin, M., and P. Hunt, "OAuth 2.0 Threat Model and Security Considerations", RFC 6819, DOI 10.17487/RFC6819, January 2013, . [RFC7636] Sakimura, N., Ed., Bradley, J., and N. Agarwal, "Proof Key for Code Exchange by OAuth Public Clients", RFC 7636, DOI 10.17487/RFC7636, September 2015, . [RFC8252] Denniss, W. and J. Bradley, "OAuth 2.0 for Native Apps", BCP 212, RFC 8252, DOI 10.17487/RFC8252, October 2017, . 11.2. Informative References [HTML] whatwg, "HTML", 2020. [tmi-bff] Bertocci, V. and B. Cambpell, "Token Mediating and session Information Backend For Frontend", April 2021. Appendix A. Server Support Checklist OAuth authorization servers that support browser-based apps MUST: 1. Require "https" scheme redirect URIs. 2. Require exact matching of registered redirect URIs. 3. Support PKCE [RFC7636]. Required to protect authorization code grants sent to public clients. See Section 7.1 4. Support cross-domain requests at the token endpoint in order to allow browsers to make the authorization code exchange request. See Section 9.8 5. Not assume that browser-based clients can keep a secret, and SHOULD NOT issue secrets to applications of this type. 6. Not support the Resource Owner Password grant for browser-based clients. 7. Follow the [oauth-security-topics] recommendations on refresh tokens, as well as the additional requirements described in Section 8. Parecki & Waite Expires 17 March 2023 [Page 25] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 Appendix B. Document History [[ To be removed from the final specification ]] -11 * Added a new architecture pattern: Token Mediating Backend * Revised and added clarifications for the Service Worker pattern * Editorial improvements in descriptions of the different architectures * Rephrased headers -10 * Revised the names of the architectural patterns * Added a new pattern using a service worker as the OAuth client to manage tokens * Added some considerations when storing tokens in Local or Session Storage -09 * Provide additional context for the same-domain architecture pattern * Added reference to draft-ietf-httpbis-rfc6265bis to clarify that SameSite is not the only CSRF protection measure needed * Editorial improvements -08 * Added a note to use the "Secure" cookie attribute in addition to SameSite etc * Updates to bring this draft in sync with the latest Security BCP * Updated text for mix-up countermeasures to reference the new "iss" extension * Changed "SHOULD" for refresh token rotation to MUST either use rotation or sender-constraining to match the Security BCP Parecki & Waite Expires 17 March 2023 [Page 26] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 * Fixed references to other specs and extensions * Editorial improvements in descriptions of the different architectures -07 * Clarify PKCE requirements apply only to issuing access tokens * Change "MUST" to "SHOULD" for refresh token rotation * Editorial clarifications -06 * Added refresh token requirements to AS summary * Editorial clarifications -05 * Incorporated editorial and substantive feedback from Mike Jones * Added references to "nonce" as another way to prevent CSRF attacks * Updated headers in the Implicit Flow section to better represent the relationship between the paragraphs -04 * Disallow the use of the Password Grant * Add PKCE support to summary list for authorization server requirements * Rewrote refresh token section to allow refresh tokens if they are time-limited, rotated on each use, and requiring that the rotated refresh token lifetimes do not extend past the lifetime of the initial refresh token, and to bring it in line with the Security BCP * Updated recommendations on using state to reflect the Security BCP * Updated server support checklist to reflect latest changes * Updated the same-domain JS architecture section to emphasize the architecture rather than domain Parecki & Waite Expires 17 March 2023 [Page 27] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 * Editorial clarifications in the section that talks about OpenID Connect ID tokens -03 * Updated the historic note about the fragment URL clarifying that the Session History API means browsers can use the unmodified authorization code flow * Rephrased "Authorization Code Flow" intro paragraph to better lead into the next two sections * Softened "is likely a better decision to avoid using OAuth entirely" to "it may be..." for common-domain deployments * Updated abstract to not be limited to public clients, since the later sections talk about confidential clients * Removed references to avoiding OpenID Connect for same-domain architectures * Updated headers to better describe architectures (Apps Served from a Static Web Server -> JavaScript Applications without a Backend) * Expanded "same-domain architecture" section to better explain the problems that OAuth has in this scenario * Referenced Security BCP in implicit flow attacks where possible * Minor typo corrections -02 * Rewrote overview section incorporating feedback from Leo Tohill * Updated summary recommendation bullet points to split out application and server requirements * Removed the allowance on hostname-only redirect URI matching, now requiring exact redirect URI matching * Updated Section 6.2 to drop reference of SPA with a backend component being a public client * Expanded the architecture section to explicitly mention three architectural patterns available to JS apps -01 Parecki & Waite Expires 17 March 2023 [Page 28] Internet-Draft OAuth 2.0 for Browser-Based Apps September 2022 * Incorporated feedback from Torsten Lodderstedt * Updated abstract * Clarified the definition of browser-based apps to not exclude applications cached in the browser, e.g. via Service Workers * Clarified use of the state parameter for CSRF protection * Added background information about the original reason the implicit flow was created due to lack of CORS support * Clarified the same-domain use case where the SPA and API share a cookie domain * Moved historic note about the fragment URL into the Overview Appendix C. Acknowledgements The authors would like to acknowledge the work of William Denniss and John Bradley, whose recommendation for native apps informed many of the best practices for browser-based applications. The authors would also like to thank Hannes Tschofenig and Torsten Lodderstedt, the attendees of the Internet Identity Workshop 27 session at which this BCP was originally proposed, and the following individuals who contributed ideas, feedback, and wording that shaped and formed the final specification: Annabelle Backman, Brian Campbell, Brock Allen, Christian Mainka, Daniel Fett, George Fletcher, Hannes Tschofenig, Janak Amarasena, John Bradley, Joseph Heenan, Justin Richer, Karl McGuinness, Karsten Meyer zu Selhausen, Leo Tohill, Mike Jones, Philippe De Ryck, Tomek Stojecki, Torsten Lodderstedt, Vittorio Bertocci and Yannick Majoros. Authors' Addresses Aaron Parecki Okta Email: aaron@parecki.com URI: https://aaronparecki.com David Waite Ping Identity Email: david@alkaline-solutions.com Parecki & Waite Expires 17 March 2023 [Page 29]