Network Working Group M.B. Jones
Internet-Draft Microsoft
Intended status: Standards Track D. Hardt
Expires: October 02, 2011 independent
D. Recordon
Facebook
March 31, 2011

The OAuth 2.0 Protocol: Bearer Tokens
draft-ietf-oauth-v2-bearer-04

Abstract

This specification describes how to use bearer tokens when accessing OAuth 2.0 protected resources.

Status of this Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on October 02, 2011.

Copyright Notice

Copyright (c) 2011 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.


Table of Contents

1. Introduction

OAuth enables clients to access protected resources by obtaining an access token, which is defined in [I-D.ietf-oauth-v2] as "a string representing an access authorization issued to the client", rather than using the resource owner's credentials.

Tokens are issued to clients by an authorization server with the approval of the resource owner. The client uses the access token to access the protected resources hosted by the resource server. This specification describes how to make protected resource requests when the OAuth access token is a bearer token.

This specification defines the use of bearer tokens with OAuth over HTTP [RFC2616] using TLS [RFC5246]. Other specifications may extend it for use with other transport protocols.

1.1. Notational Conventions

The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'MAY', and 'OPTIONAL' in this document are to be interpreted as described in [RFC2119].

This document uses the Augmented Backus-Naur Form (ABNF) notation of [I-D.ietf-httpbis-p1-messaging]. Additionally, the following rules are included from [RFC2617]: realm; from [RFC3986]: URI-Reference; and from [I-D.ietf-httpbis-p1-messaging]: RWS and quoted-string.

Unless otherwise noted, all the protocol parameter names and values are case sensitive.

1.2. Terminology

Bearer Token

A security token with the property that any party in possession of the token (a "bearer") can use the token in any way that any other party in possession of it can. Using a bearer token does not require a bearer to prove possession of cryptographic key material (proof-of-possession).

All other terms are as defined in [I-D.ietf-oauth-v2].

1.3. Overview

OAuth provides a method for clients to access a protected resource on behalf of a resource owner. Before a client can access a protected resource, it must first obtain authorization (access grant) from the resource owner and then exchange the access grant for an access token (representing the grant's scope, duration, and other attributes). The client accesses the protected resource by presenting the access token to the resource server.

The access token provides an abstraction layer, replacing different authorization constructs (e.g. username and password, assertion) for a single token understood by the resource server. This abstraction enables issuing access tokens valid for a short time period, as well as removing the resource server's need to understand a wide range of authentication schemes.

+--------+                               +---------------+
|        |--(A)- Authorization Request ->|   Resource    |
|        |                               |     Owner     |
|        |<-(B)----- Access Grant -------|               |
|        |                               +---------------+
|        |
|        |           Access Grant &      +---------------+
|        |--(C)--- Client Credentials -->| Authorization |
| Client |                               |     Server    |
|        |<-(D)----- Access Token -------|               |
|        |                               +---------------+
|        |
|        |                               +---------------+
|        |--(E)----- Access Token ------>|    Resource   |
|        |                               |     Server    |
|        |<-(F)--- Protected Resource ---|               |
+--------+                               +---------------+
          

The abstract flow illustrated in Figure 1 describes the overall OAuth 2.0 protocol architecture. The following steps are specified within this document:

2. Authenticated Requests

Clients SHOULD make authenticated requests with a bearer token using the Authorization request header field defined by [RFC2617]. Resource servers MUST accept authenticated requests using the Bearer HTTP authorization scheme as described in Section 2.1, and MAY support additional methods.

Alternatively, clients MAY transmit the access token in the HTTP body when using the application/x-www-form-urlencoded content type as described in Section 2.2; or clients MAY transmit the access token in the HTTP request URI in the query component as described in Section 2.3. Resource servers MAY support these alternative methods.

Clients SHOULD NOT use the request body or URI unless the Authorization request header field is not available, and MUST NOT use more than one method to transmit the token in each request. Because of the Security Considerations [sec-con] associated with the URI method, it SHOULD NOT be used unless no other method is feasible.

2.1. The Authorization Request Header Field

The Authorization request header field is used by clients to make authenticated requests with bearer tokens. The client uses the Bearer authentication scheme to transmit the access token in the request.

For example:

GET /resource HTTP/1.1
Host: server.example.com
Authorization: Bearer vF9dft4qmT
          

The Authorization header field uses the framework defined by [RFC2617] as follows:

credentials    = "Bearer" RWS access-token
access-token   = 1*( quoted-char / <"> )

quoted-char    =   "!" / "#" / "$" / "%" / "&" / "'" / "("
                 / ")" / "*" / "+" / "-" / "." / "/" / DIGIT
                 / ":" / "<" / "=" / ">" / "?" / "@" / ALPHA
                 / "[" / "]" / "^" / "_" / "`" / "{" / "|"
                 / "}" / "~" / "\" / "," / ";"
          

2.2. Form-Encoded Body Parameter

When including the access token in the HTTP request entity-body, the client adds the access token to the request body using the bearer_token parameter. The client MUST NOT use this method unless the following conditions are met:

The entity-body can include other request-specific parameters, in which case, the bearer_token parameter MUST be properly separated from the request-specific parameters by an & character (ASCII code 38).

For example, the client makes the following HTTP request using transport-layer security:

POST /resource HTTP/1.1
Host: server.example.com
Content-Type: application/x-www-form-urlencoded

bearer_token=vF9dft4qmT
          

The application/x-www-form-urlencoded method SHOULD NOT be used except in application contexts where participating browsers do not have access to the Authorization request header field.

2.3. URI Query Parameter

When including the access token in the HTTP request URI, the client adds the access token to the request URI query component as defined by [RFC3986] using the bearer_token parameter.

For example, the client makes the following HTTP request using transport-layer security:

GET /resource?bearer_token=vF9dft4qmT HTTP/1.1
Host: server.example.com
          

The HTTP request URI query can include other request-specific parameters, in which case, the bearer_token parameter MUST be properly separated from the request-specific parameters by an & character (ASCII code 38).

For example:

http://example.com/resource?x=y&bearer_token=vF9dft4qmT
          

Because of the Security Considerations [sec-con] associated with the URI method, it SHOULD NOT be used unless no other method is feasible.

2.4. The WWW-Authenticate Response Header Field

If the protected resource request does not include authentication credentials or contains an invalid access token, the resource server MUST include the HTTP WWW-Authenticate response header field; it MAY include it in response to other conditions as well. The WWW-Authenticate header field uses the framework defined by [RFC2617] as follows:

challenge       = "Bearer" [ RWS 1#param ]

param           = realm / scope /
                  error / error-desc / error-uri /
                  ( token "=" ( token / quoted-string ) )

scope           = "scope" "=" <"> scope-v *( SP scope-v ) <">
scope-v         = 1*quoted-char

quoted-char     = ALPHA / DIGIT /
                  "!" / "#" / "$" / "%" / "&" / "'" / "(" / ")" /
                  "*" / "+" / "-" / "." / "/" / ":" / "<" / "=" /
                  ">" / "?" / "@" / "[" / "]" / "^" / "_" / "`" /
                  "{" / "|" / "}" / "~" / "\" / "," / ";"

error           = "error" "=" quoted-string
error-desc      = "error_description" "=" quoted-string
error-uri       = "error_uri" = <"> URI-reference <">
          

The scope attribute is a space-delimited list of scope values indicating the required scope of the access token for accessing the requested resource. The scope attribute MUST NOT appear more than once.

If the protected resource request included an access token and failed authentication, the resource server SHOULD include the error attribute to provide the client with the reason why the access request was declined. The parameter value is described in Section 2.4.1. In addition, the resource server MAY include the error_description attribute to provide a human-readable explanation, and the error_uri attribute with an absolute URI identifying a human-readable web page explaining the error. The error, error_description, and error_uri attribute MUST NOT appear more than once.

For example, in response to a protected resource request without authentication:

HTTP/1.1 401 Unauthorized
WWW-Authenticate: Bearer realm="example"
          

And in response to a protected resource request with an authentication attempt using an expired access token:

HTTP/1.1 401 Unauthorized
WWW-Authenticate: Bearer realm="example"
                  error="invalid_token",
                  error_description="The access token expired"
          

2.4.1. Error Codes

When a request fails, the resource server responds using the appropriate HTTP status code (typically, 400, 401, or 403), and includes one of the following error codes in the response:

invalid_request

The request is missing a required parameter, includes an unsupported parameter or parameter value, repeats the same parameter, uses more than one method for including an access token, or is otherwise malformed. The resource server SHOULD respond with the HTTP 400 (Bad Request) status code.
invalid_token

The access token provided is expired, revoked, malformed, or invalid for other reasons. The resource SHOULD respond with the HTTP 401 (Unauthorized) status code. The client MAY request a new access token and retry the protected resource request.
insufficient_scope

The request requires higher privileges than provided by the access token. The resource server SHOULD respond with the HTTP 403 (Forbidden) status code and MAY include the scope attribute with the scope necessary to access the protected resource.

New errors MUST be separately registered in the OAuth Errors registry as described by Section 4.2.

If the request lacks any authentication information (i.e. the client was unaware authentication is necessary or attempted using an unsupported authentication method), the resource server SHOULD NOT include an error code or other error information.

For example:

HTTP/1.1 401 Unauthorized
WWW-Authenticate: Bearer realm="example"
            

3. Security Considerations

This section describes the relevant security threats regarding token handling when using bearer tokens and describes how to mitigate these threats.

3.1. Security Threats

The following list presents several common threats against protocols utilizing some form of tokens. This list of threats is based on NIST Special Publication 800-63 [NIST800-63]. Since this document builds on the OAuth 2.0 specification, we exclude a discussion of threats that are described there or in related documents.

Token manufacture/modification:
An attacker may generate a bogus token or modify the token contents (such as the authentication or attribute statements) of an existing token, causing the resource server to grant inappropriate access to the client. For example, an attacker may modify the token to extend the validity period; a malicious client may modify the assertion to gain access to information that they should not be able to view.
Token disclosure:
Tokens may contain authentication and attribute statements that include sensitive information.
Token redirect:
An attacker uses the token generated for consumption by resource server to obtain access to another resource server.
Token replay:
An attacker attempts to use a token that has already been used with that resource server in the past.

3.2. Threat Mitigation

A large range of threats can be mitigated by protecting the contents of the token by using a digital signature or a Message Authentication Code (MAC). Alternatively, a bearer token can contain a reference to authorization information, rather than encoding the information directly. Such references MUST be infeasible for an attacker to guess; using a reference may require an extra interaction between a server and the token issuer to resolve the reference to the authorization information.

This document does not specify the encoding or the contents of the token; hence detailed recommendations for token integrity protection are outside the scope of this document. We assume that the token integrity protection is sufficient to prevent the token from being modified.

To deal with token redirect, it is important for the authorization server to include the identity of the intended recipients, namely a single resource server (or a list of resource servers). Restricting the use of the token to a specific scope is also recommended.

To provide protection against token disclosure, confidentiality protection is applied via TLS [RFC5246] with a ciphersuite that offers confidentiality protection. This requires that the communication interaction between the client and the authorization server, as well as the interaction between the client and the resource server, utilize confidentiality protection. Since TLS is mandatory to implement and to use with this specification, it is the preferred approach for preventing token disclosure via the communication channel. For those cases where the client is prevented from observing the contents of the token, token encryption has to be applied in addition to the usage of TLS protection.

To deal with token capture and replay, the following recommendations are made: First, the lifetime of the token has to be limited by putting a validity time field inside the protected part of the token. Note that using short-lived (one hour or less) tokens significantly reduces the impact of one of them being leaked. Second, confidentiality protection of the exchanges between the client and the authorization server and between the client and the resource server MUST be applied, for instance, through the use of TLS [RFC5246]. As a consequence, no eavesdropper along the communication path is able to observe the token exchange. Consequently, such an on-path adversary cannot replay the token. Furthermore, when presenting the token to a resource server, the client MUST verify the identity of that resource server, as per [RFC2818]. Note that the client MUST validate the TLS certificate chain when making these requests to protected resources. Presenting the token to an unauthenticated and unauthorized resource server or failing to validate the certificate chain will allow adversaries to steal the token and gain unauthorized access to protected resources.

3.3. Summary of Recommendations

Safeguard bearer tokens
Client implementations MUST ensure that bearer tokens are not leaked to unintended parties, as they will be able to use them to gain access to protected resources. This is the primary security consideration when using bearer tokens and underlies all the more specific recommendations that follow.
Validate SSL certificate chains
The client must validate the TLS certificate chain when making requests to protected resources. Failing to do so may enable DNS hijacking attacks to steal the token and gain unintended access.
Always use TLS (https)
Clients MUST always use TLS [RFC5246] (https) when making requests with bearer tokens. Failing to do so exposes the token to numerous attacks that could give attackers unintended access.
Don't store bearer tokens in cookies
Implementations MUST NOT store bearer tokens within cookies that can be sent in the clear (which is the default transmission mode for cookies).
Issue short-lived bearer tokens
Using short-lived (one hour or less) bearer tokens can reduce the impact of one of them being leaked. In particular, only short-lived bearer tokens should be issued to clients that run within a web browser or other environments where information leakage may occur.
Don't pass bearer tokens in page URLs
Browsers, web servers, and other software may not adequately secure URLs in the browser history, web server logs, and other data structures. If bearer tokens are passed in page URLs (typically as query string parameters), attackers might be able to steal them from the history data, logs, or other unsecured locations. Instead, pass bearer tokens in HTTP message headers or message bodies for which confidentiality measures are taken.

4. IANA Considerations

4.1. OAuth Access Token Type Registration

This specification registers the following access token type in the OAuth Access Token Type Registry.

4.1.1. The "Bearer" OAuth Access Token Type

Type name:

Bearer
Additional Token Endpoint Response Parameters:

(none)
HTTP Authentication Scheme(s):

Bearer
Change controller:

IETF
Specification document(s):

[[ this document ]]

4.2. The OAuth Errors Registry

This specification establishes the OAuth Errors registry.

Additional errors for inclusion in the authorization endpoint response, the token endpoint response, or the resource endpoint response are registered on the advice of one or more Designated Experts (appointed by the IESG or their delegate), with a Specification Required (using terminology from [RFC5226]). However, to allow for the allocation of values prior to publication, the Designated Expert(s) may approve registration once they are satisfied that such a specification will be published.

Registration requests should be sent to the [TBD]@ietf.org mailing list for review and comment, with an appropriate subject (e.g., "Request for error: example"). [[ Note to RFC-EDITOR: The name of the mailing list should be determined in consultation with the IESG and IANA. Suggested name: oauth-ext-review. ]]

Before a period of 14 days has passed, the Designated Expert(s) will either approve or deny the registration request, communicating this decision both to the review list and to IANA. Denials should include an explanation and, if applicable, suggestions as to how to make the request successful. Registration requests that are undetermined for a period longer than 21 days can be brought to the IESG's attention (using the iesg@iesg.org mailing list) for resolution.

4.2.1. Registration Template

Error name:

The name requested (e.g., "example").
Error usage location:

The location(s) where the error can be used. The possible locations are: authorization response, token response, resource response.
Change controller:

For standards-track RFCs, state "IETF". For others, give the name of the responsible party. Other details (e.g., postal address, e-mail address, home page URI) may also be included.
Specification document(s):

Reference to document that specifies the error, preferably including a URI that can be used to retrieve a copy of the document. An indication of the relevant sections may also be included, but is not required.

4.2.2. Initial Registry Contents

The OAuth Errors Registry's initial contents are:

5. References

5.1. Normative References

[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P. and T. Berners-Lee, "Hypertext Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.
[RFC2617] Franks, J., Hallam-Baker, P.M., Hostetler, J.L., Lawrence, S.D., Leach, P.J., Luotonen, A. and L. Stewart, "HTTP Authentication: Basic and Digest Access Authentication", RFC 2617, June 1999.
[RFC2818] Rescorla, E., "HTTP Over TLS", RFC 2818, May 2000.
[RFC3986] Berners-Lee, T., Fielding, R. and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, January 2005.
[RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 5226, May 2008.
[RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.2", RFC 5246, August 2008.
[W3C.REC-html401-19991224] Raggett, D., Hors, A. and I. Jacobs, "HTML 4.01 Specification", World Wide Web Consortium Recommendation REC-html401-19991224, December 1999.
[I-D.ietf-httpbis-p1-messaging] Fielding, R, Gettys, J, Mogul, J, Nielsen, H, Masinter, L, Leach, P, Berners-Lee, T and J Reschke, "HTTP/1.1, part 1: URIs, Connections, and Message Parsing", Internet-Draft draft-ietf-httpbis-p1-messaging-13, March 2011.
[I-D.ietf-oauth-v2] Hammer-Lahav, E, Recordon, D and D Hardt, "The OAuth 2.0 Authorization Protocol", Internet-Draft draft-ietf-oauth-v2-13, February 2011.

5.2. Informative References

[NIST800-63] Burr, W., Dodson, D., Perlner, R., Polk, T., Gupta, S. and E. Nabbus, "NIST Special Publication 800-63-1, INFORMATION SECURITY", December 2008.
[I-D.ietf-httpbis-p7-auth] Fielding, R, Gettys, J, Mogul, J, Nielsen, H, Masinter, L, Leach, P, Berners-Lee, T and J Reschke, "HTTP/1.1, part 7: Authentication", Internet-Draft draft-ietf-httpbis-p7-auth-13, March 2011.

Appendix A. Acknowledgements

The following people contributed to preliminary versions of this document: Blaine Cook (BT), Brian Eaton (Google), Yaron Goland (Microsoft), Brent Goldman (Facebook), Raffi Krikorian (Twitter), Luke Shepard (Facebook), and Allen Tom (Yahoo!). The content and concepts within are a product of the OAuth community, the WRAP community, and the OAuth Working Group.

The OAuth Working Group has dozens of very active contributors who proposed ideas and wording for this document, including: Michael Adams, Andrew Arnott, Dirk Balfanz, Brian Campbell, Leah Culver, Bill de hÓra, Brian Ellin, Igor Faynberg, George Fletcher, Tim Freeman, Evan Gilbert, Justin Hart, John Kemp, Eran Hammer-Lahav, Chasen Le Hara, Michael B. Jones, Torsten Lodderstedt, Eve Maler, James Manger, Laurence Miao, Chuck Mortimore, Anthony Nadalin, Justin Richer, Peter Saint-Andre, Nat Sakimura, Rob Sayre, Marius Scurtescu, Naitik Shah, Justin Smith, Jeremy Suriel, Christian Stübner, Paul Tarjan, and Franklin Tse.

Appendix B. Document History

[[ to be removed by the RFC editor before publication as an RFC ]]

-04

-03

-02

-01

-00

Authors' Addresses

Michael B. Jones Microsoft EMail: mbj@microsoft.com URI: http://self-issued.info/
Dick Hardt independent EMail: dick.hardt@gmail.com URI: http://dickhardt.org/
David Recordon Facebook EMail: dr@fb.com URI: http://www.davidrecordon.com/