A YANG Data Model for Path Computation Element Communications Protocol (PCEP)
Huawei Technologies
Divyashree Techno Park, Whitefield
Bangalore
Karnataka
560066
India
dhruv.ietf@gmail.com
Metaswitch
100 Church Street
Enfield
EN2 6BQ
UK
jonathan.hardwick@metaswitch.com
Juniper Networks
USA
vbeeram@juniper.net
USA
jefftant@gmail.com
Routing
PCE Working Group
This document defines a YANG data model for the management of
Path Computation Element communications Protocol (PCEP) for
communications between a Path Computation Client (PCC) and a Path
Computation Element (PCE), or between two PCEs. The data model
includes configuration and state data.
The Path Computation Element (PCE) defined in
is an entity that is capable of computing a network path or route
based on a network graph, and applying computational constraints.
A Path Computation Client (PCC) may make requests to a PCE for paths
to be computed.
PCEP is the communication protocol between a PCC and PCE and is
defined in . PCEP interactions include path
computation requests and path computation replies as well as
notifications of specific states related to the use of a PCE in the
context of Multiprotocol Label Switching (MPLS) and Generalized MPLS
(GMPLS) Traffic Engineering (TE).
specifies extensions to PCEP to enable stateful control of MPLS TE LSPs.
This document defines a YANG data model
for the management of PCEP speakers. It is important to
establish a common data model for how PCEP speakers are identified,
configured, and monitored. The data model includes configuration data
and state data.
This document contains a specification of the PCEP YANG module,
"ietf-pcep" which provides the PCEP data
model.
The PCEP operational state is included in the same tree as the PCEP
configuration consistent with Network Management Datastore
Architecture .
The origin of the data is indicated as per the origin metadata
annotation.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL
NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED",
"MAY", and "OPTIONAL" in this document are to be interpreted as
described in BCP 14 when, and only when, they
appear in all capitals, as shown here.
This document uses the terminology defined in
and . In particular, it uses the following
acronyms.
Path Computation Request message (PCReq).
Path Computation Reply message (PCRep).
Notification message (PCNtf).
Error message (PCErr).
Request Parameters object (RP).
Synchronization Vector object (SVEC).
Explicit Route object (ERO).
This document also uses the following terms defined in
:
PCEP entity: a local PCEP speaker.
PCEP peer: to refer to a remote PCEP speaker.
PCEP speaker: where it is not necessary to distinguish between local
and remote.
Further, this document also uses the following terms defined in
:
Stateful PCE, Passive Stateful PCE, Active Stateful PCE
Delegation, Revocation, Redelegation
LSP State Report, Path Computation Report message (PCRpt).
LSP State Update, Path Computation Update message (PCUpd).
:
PCE-initiated LSP, Path Computation LSP Initiate Message (PCInitiate).
:
Path Setup Type (PST).
:
Segment Routing (SR).
:
Configuration data.
State data.
A simplified graphical representation of the data model is used in this
document. The meaning of the symbols in these diagrams is defined in .
In this document, names of data nodes and other data
model objects are often used without a prefix, as long as it is clear
from the context in which YANG module each name is defined.
Otherwise, names are prefixed using the standard prefix associated
with the corresponding YANG module, as shown in .
Prefix
YANG module
Reference
yang ietf-yang-types
inet ietf-inet-types
te ietf-te
te-types ietf-te-types
key-chain ietf-key-chain
nacm ietf-netconf-acm
tls-server ietf-tls-server
tls-client ietf-tls-client
ospf ietf-ospf
isis ietf-isis
Following documents are refrenced in the model defined in this document -
Documents
Reference
RSVP-TE: Extensions to RSVP for LSP Tunnels
OSPF Protocol Extensions for Path Computation Element (PCE) Discovery
IS-IS Protocol Extensions for Path Computation Element (PCE) Discovery
Path Computation Element (PCE) Communication Protocol (PCEP)
Preserving Topology Confidentiality in Inter-Domain Path Computation Using a Path-Key-Based Mechanism
Encoding of Objective Functions in the Path Computation Element Communication Protocol (PCEP)
Path Computation Element Communication Protocol (PCEP) Requirements and Protocol Extensions in Support of Global Concurrent Optimization
Common YANG Data Types
YANG Data Model for Key Chains
Path Computation Element Communication Protocol (PCEP) Extensions for Stateful PCE
Optimizations of Label Switched Path State Synchronization Procedures for a Stateful PCE
PCEPS: Usage of TLS to Provide a Secure Transport for the Path Computation Element Communication Protocol (PCEP)
Path Computation Element Communication Protocol (PCEP) Extensions for PCE-Initiated LSP Setup in a Stateful PCE Model
Extensions to the Path Computation Element Communication Protocol (PCEP) for Point-to-Multipoint Traffic Engineering Label Switched Paths
Network Configuration Access Control Model
Conveying Path Setup Type in PCE Communication Protocol (PCEP) Messages
Traffic Engineering Common YANG Types
A YANG Data Model for Traffic Engineering Tunnels and Interfaces
YANG Groupings for TLS Clients and TLS Servers
PCEP Extensions for Segment Routing
PCEP Extensions for Establishing Relationships Between Sets of LSPs
YANG Data Model for OSPF Protocol
YANG Data Model for IS-IS Protocol
PCEP extensions for GMPLS
This section describes some of the design objectives for the model:
In case of existing implementations, it needs to map
the data model defined in this document to their proprietary
native data model. To facilitate such mappings, the data model
should be simple.
The data model should be suitable for new implementations to use
as is.
Mapping to the PCEP MIB Module should be clear.
The data model should allow for static configurations of peers.
The data model should include read-only counters in order to
gather statistics for sent and received PCEP messages,
received messages with errors, and messages that could not be sent
due to errors. This could be in a separate model which
augments the base data model.
It should be fairly straightforward to augment the base data model
for advanced PCE features.
The PCEP YANG module defined in this document has all the common
building blocks for the PCEP protocol.
/pcep/entity/peers/peer/addr
notifications:
+---n pcep-session-up
| ...
+---n pcep-session-down
| ...
+---n pcep-session-local-overload
| ...
+---n pcep-session-local-overload-clear
| ...
+---n pcep-session-peer-overload
| ...
+---n pcep-session-peer-overload-clear
...
]]>
The PCEP yang module may contain status information for the
local PCEP entity.
The entity has an IP address
(using ietf-inet-types ) and a "role"
leaf (the local entity PCEP role) as mandatory.
Note that, the PCEP MIB module uses an
entity list and a system generated entity index as a primary index
to the read only entity
table. If the device implements the PCEP MIB, the "index" leaf MUST contain
the value of the corresponding pcePcepEntityIndex and only one entity
is assumed.
The various information related to this entity such as its domain, capcabilities etc.
Further incase when the entity is PCE it could also have path-key and the LSP-DB information.
/pcep/entity/lsp-db/lsp/plsp-id
| | +--ro pcc-id -> /pcep/entity/lsp-db/lsp/pcc-id
| +--ro lsp* [plsp-id pcc-id]
| +--ro plsp-id uint32
| +--ro pcc-id inet:ip-address
| +--ro lsp-ref
| | +--ro source?
| | | -> /te:te/lsps-state/lsp/source
| | +--ro destination?
| | | -> /te:te/lsps-state/lsp/destination
| | +--ro tunnel-id?
| | | -> /te:te/lsps-state/lsp/tunnel-id
| | +--ro lsp-id?
| | | -> /te:te/lsps-state/lsp/lsp-id
| | +--ro extended-tunnel-id?
| | -> /te:te/lsps-state/lsp/extended-tunnel-id
| +--ro admin-state? boolean
| +--ro operational-state? operational-state
| +--ro delegated
| | +--ro enabled? boolean
| | +--ro peer? -> /pcep/entity/peers/peer/addr
| | +--ro srp-id? uint32
| +--ro initiation {pce-initiated}?
| | +--ro enabled? boolean
| | +--ro peer? -> /pcep/entity/peers/peer/addr
| +--ro symbolic-path-name? string
| +--ro last-error? identityref
| +--ro pst? identityref
| +--ro association-list*
| [type id source global-source extended-id]
| {association}?
| +--ro type
| | -> /pcep/entity/lsp-db/association-list/type
| +--ro id
| | -> /pcep/entity/lsp-db/association-list/id
| +--ro source leafref
| +--ro global-source leafref
| +--ro extended-id leafref
+--ro path-keys {path-key}?
| +--ro path-keys* [path-key]
| +--ro path-key uint16
| +--ro cps
| | +--ro explicit-route-objects* [index]
| | +--ro index uint32
| | +--ro (type)?
| | +--:(numbered-node-hop)
| | | +--ro numbered-node-hop
| | | +--ro node-id te-node-id
| | | +--ro hop-type? te-hop-type
| | +--:(numbered-link-hop)
| | | +--ro numbered-link-hop
| | | +--ro link-tp-id te-tp-id
| | | +--ro hop-type? te-hop-type
| | | +--ro direction? te-link-direction
| | +--:(unnumbered-link-hop)
| | | +--ro unnumbered-link-hop
| | | +--ro link-tp-id te-tp-id
| | | +--ro node-id te-node-id
| | | +--ro hop-type? te-hop-type
| | | +--ro direction? te-link-direction
| | +--:(as-number)
| | | +--ro as-number-hop
| | | +--ro as-number inet:as-number
| | | +--ro hop-type? te-hop-type
| | +--:(label)
| | +--ro label-hop
| | +--ro te-label
| | ...
| +--ro pcc-original? -> /pcep/entity/peers/peer/addr
| +--ro req-id? uint32
| +--ro retrieved? boolean
| +--ro pcc-retrieved? -> /pcep/entity/peers/peer/addr
| +--ro creation-time? yang:timestamp
| +--ro discard-time? uint32
| +--ro reuse-time? uint32
+--rw peers
+--rw peer* [addr]
...
]]>
The peer list contains peer(s) that the
local PCEP entity knows about. A PCEP speaker is identified by its
IP address. If there is a PCEP
speaker in the network that uses multiple IP addresses
then it looks like multiple distinct peers to the other PCEP
speakers in the network.
Since PCEP sessions
can be ephemeral, the peer list tracks a peer even when no
PCEP session currently exists to that peer. The statistics contained
are an aggregate of the statistics for all
successive sessions to that peer.
To limit the quantity of information that is stored, an
implementation MAY choose to discard this information
if and only if no PCEP session exists to the corresponding peer.
The data model for PCEP peer presented in this document uses a flat
list of peers. Each peer in the list is identified by its
IP address (addr-type, addr).
There is a list for static peer configuration and operational state of
all peers (i.e.static as well as discovered)("/pcep/entity/peers"). The list
is used to enable remote PCE configuration at PCC (or PCE) and has the
operational state of these peers as well as the remote PCE peer which were
discovered and PCC peers that have initiated session.
The session list contains PCEP session that the
PCEP entity (PCE or PCC) is currently participating in.
The statistics in
session are semantically different from those in
peer since the former applies to the current session only,
whereas the latter is the aggregate for all sessions that have
existed to that peer.
Although forbids more than one
active PCEP session between a given pair of PCEP entities
at any given time, there is a window during session
establishment where two sessions may exist for a given pair,
one representing a session initiated by the local PCEP
entity and the other representing a session initiated by
the peer. If either of these sessions reaches active state
first, then the other is discarded.
The data model for PCEP session presented in this document uses a flat
list of sessions. Each session in the list is identified by its
initiator. This index allows two sessions to exist transiently for a
given peer, as discussed above.
/pcep/entity/role
+--ro state-last-change? yang:timestamp
+--ro state? pcep-sess-state
+--ro session-creation? yang:timestamp
+--ro connect-retry? yang:counter32
+--ro local-id? uint8
+--ro remote-id? uint8
+--ro keepalive-timer? uint8
+--ro peer-keepalive-timer? uint8
+--ro dead-timer? uint8
+--ro peer-dead-timer? uint8
+--ro ka-hold-time-rem? uint8
+--ro overloaded? boolean
+--ro overload-time? uint32
+--ro peer-overloaded? boolean
+--ro peer-overload-time? uint32
+--ro lspdb-sync? sync-state
| {stateful}?
+--ro recv-db-ver? uint64
| {stateful,sync-opt}?
+--ro of-list {objective-function}?
| +--ro objective-function* [of]
| +--ro of identityref
+--ro pst-list
| +--ro path-setup-type* [pst]
| +--ro pst identityref
+--ro assoc-type-list {association}?
| +--ro assoc-type* [at]
| +--ro at identityref
+--ro speaker-entity-id? string {sync-opt}?
+--ro discontinuity-time? yang:timestamp
]]>
This YANG model defines a list of notifications to inform client of
important events detected during the protocol operation. The
notifications defined cover the PCEP MIB notifications.
/pcep/entity/peers/peer/addr
| +--ro session-initiator?
| | -> /pcep/entity/peers/peer/sessions/session/initiator
| +--ro state-last-change? yang:timestamp
| +--ro state? pcep-sess-state
+---n pcep-session-down
| +--ro peer-addr? -> /pcep/entity/peers/peer/addr
| +--ro session-initiator? pcep-initiator
| +--ro state-last-change? yang:timestamp
| +--ro state? pcep-sess-state
+---n pcep-session-local-overload
| +--ro peer-addr? -> /pcep/entity/peers/peer/addr
| +--ro session-initiator?
| | -> /pcep/entity/peers/peer/sessions/session/initiator
| +--ro overloaded? boolean
| +--ro overload-time? uint32
+---n pcep-session-local-overload-clear
| +--ro peer-addr? -> /pcep/entity/peers/peer/addr
| +--ro overloaded? boolean
+---n pcep-session-peer-overload
| +--ro peer-addr? -> /pcep/entity/peers/peer/addr
| +--ro session-initiator?
| | -> /pcep/entity/peers/peer/sessions/session/initiator
| +--ro peer-overloaded? boolean
| +--ro peer-overload-time? uint32
+---n pcep-session-peer-overload-clear
+--ro peer-addr? -> /pcep/entity/peers/peer/addr
+--ro peer-overloaded? boolean
]]>
This YANG model defines a RPC to trigger state resynchronization to
a particular PCEP peer.
/pcep/entity/peers/peer/addr
]]>
The module, "ietf-pcep", defines the basic components of a PCE speaker. The tree depth in the tree is set to 10.
/pcep/entity/lsp-db/lsp/plsp-id
| | +--ro pcc-id -> /pcep/entity/lsp-db/lsp/pcc-id
| +--ro lsp* [plsp-id pcc-id]
| +--ro plsp-id uint32
| +--ro pcc-id inet:ip-address
| +--ro lsp-ref
| | +--ro source?
| | | -> /te:te/lsps-state/lsp/source
| | +--ro destination?
| | | -> /te:te/lsps-state/lsp/destination
| | +--ro tunnel-id?
| | | -> /te:te/lsps-state/lsp/tunnel-id
| | +--ro lsp-id?
| | | -> /te:te/lsps-state/lsp/lsp-id
| | +--ro extended-tunnel-id?
| | -> /te:te/lsps-state/lsp/extended-tunnel-id
| +--ro admin-state? boolean
| +--ro operational-state? operational-state
| +--ro delegated
| | +--ro enabled? boolean
| | +--ro peer? -> /pcep/entity/peers/peer/addr
| | +--ro srp-id? uint32
| +--ro initiation {pce-initiated}?
| | +--ro enabled? boolean
| | +--ro peer? -> /pcep/entity/peers/peer/addr
| +--ro symbolic-path-name? string
| +--ro last-error? identityref
| +--ro pst? identityref
| +--ro association-list*
| [type id source global-source extended-id]
| {association}?
| +--ro type
| | -> /pcep/entity/lsp-db/association-list/type
| +--ro id
| | -> /pcep/entity/lsp-db/association-list/id
| +--ro source leafref
| +--ro global-source leafref
| +--ro extended-id leafref
+--ro path-keys {path-key}?
| +--ro path-keys* [path-key]
| +--ro path-key uint16
| +--ro cps
| | +--ro explicit-route-objects* [index]
| | +--ro index uint32
| | +--ro (type)?
| | +--:(numbered-node-hop)
| | | +--ro numbered-node-hop
| | | +--ro node-id te-node-id
| | | +--ro hop-type? te-hop-type
| | +--:(numbered-link-hop)
| | | +--ro numbered-link-hop
| | | +--ro link-tp-id te-tp-id
| | | +--ro hop-type? te-hop-type
| | | +--ro direction? te-link-direction
| | +--:(unnumbered-link-hop)
| | | +--ro unnumbered-link-hop
| | | +--ro link-tp-id te-tp-id
| | | +--ro node-id te-node-id
| | | +--ro hop-type? te-hop-type
| | | +--ro direction? te-link-direction
| | +--:(as-number)
| | | +--ro as-number-hop
| | | +--ro as-number inet:as-number
| | | +--ro hop-type? te-hop-type
| | +--:(label)
| | +--ro label-hop
| | +--ro te-label
| | ...
| +--ro pcc-original? -> /pcep/entity/peers/peer/addr
| +--ro req-id? uint32
| +--ro retrieved? boolean
| +--ro pcc-retrieved? -> /pcep/entity/peers/peer/addr
| +--ro creation-time? yang:timestamp
| +--ro discard-time? uint32
| +--ro reuse-time? uint32
+--rw peers
+--rw peer* [addr]
+--rw addr inet:ip-address
+--rw role pcep-role
+--rw description? string
+--rw domain
| +--rw domain* [domain-type domain]
| +--rw domain-type domain-type
| +--rw domain domain
+--rw capability
| +--rw capability? bits
| +--rw pce-initiated? boolean
| | {pce-initiated}?
| +--rw include-db-ver? boolean
| | {stateful,sync-opt}?
| +--rw trigger-resync? boolean
| | {stateful,sync-opt}?
| +--rw trigger-initial-sync? boolean
| | {stateful,sync-opt}?
| +--rw incremental-sync? boolean
| | {stateful,sync-opt}?
| +--rw sr {sr}?
| +--rw enabled? boolean
| +--rw msd-limit? boolean
| +--rw nai? boolean
+--rw msd? uint8 {sr}?
+--rw pce-info
| +--rw scope
| | +--rw path-scope? bits
| | +--rw intra-area-pref? uint8
| | +--rw inter-area-pref? uint8
| | +--rw inter-as-pref? uint8
| | +--rw inter-layer-pref? uint8
| +--rw neigh-domains
| +--rw domain* [domain-type domain]
| +--rw domain-type domain-type
| +--rw domain domain
+--rw delegation-pref? uint8 {stateful}?
+--rw auth
| +--rw (auth-type-selection)?
| +--:(auth-key-chain)
| | +--rw key-chain?
| | key-chain:key-chain-ref
| +--:(auth-key)
| | +--rw crypto-algorithm identityref
| | +--rw (key-string-style)?
| | +--:(keystring)
| | | +--rw keystring? string
| | +--:(hexadecimal)
| | {key-chain:hex-key-string}?
| | +--rw hexadecimal-string?
| | yang:hex-string
| +--:(auth-tls) {tls}?
| +--rw (role)?
| +--:(server)
| | +--rw tls-server
| | ...
| +--:(client)
| +--rw tls-client
| ...
+--ro discontinuity-time? yang:timestamp
+--ro initiate-session? boolean
+--ro session-exists? boolean
+--ro session-up-time? yang:timestamp
+--ro session-fail-time? yang:timestamp
+--ro session-fail-up-time? yang:timestamp
+--ro sessions
+--ro session* [initiator]
+--ro initiator pcep-initiator
+--ro role?
| -> /pcep/entity/role
+--ro state-last-change? yang:timestamp
+--ro state? pcep-sess-state
+--ro session-creation? yang:timestamp
+--ro connect-retry? yang:counter32
+--ro local-id? uint8
+--ro remote-id? uint8
+--ro keepalive-timer? uint8
+--ro peer-keepalive-timer? uint8
+--ro dead-timer? uint8
+--ro peer-dead-timer? uint8
+--ro ka-hold-time-rem? uint8
+--ro overloaded? boolean
+--ro overload-time? uint32
+--ro peer-overloaded? boolean
+--ro peer-overload-time? uint32
+--ro lspdb-sync? sync-state
| {stateful}?
+--ro recv-db-ver? uint64
| {stateful,sync-opt}?
+--ro of-list {objective-function}?
| +--ro objective-function* [of]
| +--ro of identityref
+--ro pst-list
| +--ro path-setup-type* [pst]
| +--ro pst identityref
+--ro assoc-type-list {association}?
| +--ro assoc-type* [at]
| +--ro at identityref
+--ro speaker-entity-id? string {sync-opt}?
+--ro discontinuity-time? yang:timestamp
rpcs:
+---x trigger-resync {stateful,sync-opt}?
+---w input
+---w pcc? -> /pcep/entity/peers/peer/addr
notifications:
+---n pcep-session-up
| +--ro peer-addr? -> /pcep/entity/peers/peer/addr
| +--ro session-initiator?
| | -> /pcep/entity/peers/peer/sessions/session/initiator
| +--ro state-last-change? yang:timestamp
| +--ro state? pcep-sess-state
+---n pcep-session-down
| +--ro peer-addr? -> /pcep/entity/peers/peer/addr
| +--ro session-initiator? pcep-initiator
| +--ro state-last-change? yang:timestamp
| +--ro state? pcep-sess-state
+---n pcep-session-local-overload
| +--ro peer-addr? -> /pcep/entity/peers/peer/addr
| +--ro session-initiator?
| | -> /pcep/entity/peers/peer/sessions/session/initiator
| +--ro overloaded? boolean
| +--ro overload-time? uint32
+---n pcep-session-local-overload-clear
| +--ro peer-addr? -> /pcep/entity/peers/peer/addr
| +--ro overloaded? boolean
+---n pcep-session-peer-overload
| +--ro peer-addr? -> /pcep/entity/peers/peer/addr
| +--ro session-initiator?
| | -> /pcep/entity/peers/peer/sessions/session/initiator
| +--ro peer-overloaded? boolean
| +--ro peer-overload-time? uint32
+---n pcep-session-peer-overload-clear
+--ro peer-addr? -> /pcep/entity/peers/peer/addr
+--ro peer-overloaded? boolean
]]>
The module, "ietf-pcep-stats", augments the ietf-pcep module to include statistics at the
PCEP peer and session level.
This document contains a specification of the base PCEP YANG module,
"ietf-pcep" which provides the basic PCEP data
model.
This document further handles advanced PCE features like -
Capability and Scope
Domain information (local/neighbour)
Path-Key
OF
GCO
P2MP
GMPLS
Inter-Layer
Stateful PCE
Segement Routing
Authentication including PCEPS (TLS)
In the operational state of PCEP which supports stateful PCE mode, the
list of LSP state are maintained in LSP-DB. The key is the PLSP-ID and the
PCC IP address.
The PCEP data model contains the operational state
of LSPs (/pcep/entity/lsp-db/lsp/) with PCEP specific
attributes. The generic TE attributes of the LSP are defined
in . A reference to LSP
state in TE model is maintained.
This section is added so that open issues can be tracked.
This section would be removed when the document is ready for publication.
The TE Model at should
support creating of tunnels at the controller (PCE) and marking
them as PCE-Initiated. The LSP-DB in the PCEP Yang (/pcep/entity/lsp-db/lsp/initiation)
also marks the LSPs which are PCE-initiated.
describe the use of TLS in PCEP.
The peer acting as the PCEP client MUST act as the TLS client.
The TLS client actively opens the TLS connection and the TLS server
passively listens for the incoming TLS connections. The well-known
TCP port number 4189 is used by PCEP servers to listen for TCP
connections established by PCEP over TLS clients. The TLS client
MUST send the TLS ClientHello message to begin the TLS handshake.
The TLS server MUST send a CertificateRequest in order to request a
certificate from the TLS client. Once the TLS handshake has
finished, the client and the server MAY begin to exchange PCEP
messages. Client and server identity verification is done before the
PCEP open message is sent. This means that the identity
verification is completed before the PCEP session is started..
RFC Ed.: In this section, replace all occurrences of 'XXXX' with the
actual RFC number and all occurrences of the revision date below with
the date of RFC publication (and remove this note).
file "ietf-pcep@2019-03-26.yang"
module ietf-pcep {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-pcep";
prefix pcep;
import ietf-inet-types {
prefix inet;
reference
"RFC 6991: Common YANG Data Types";
}
import ietf-yang-types {
prefix yang;
reference
"RFC 6991: Common YANG Data Types";
}
import ietf-te {
prefix te;
reference
"[I-D.ietf-teas-yang-te]: A YANG Data Model for Traffic
Engineering Tunnels and Interfaces";
}
import ietf-te-types {
prefix te-types;
reference
"[I-D.ietf-teas-yang-te-types]: Traffic Engineering Common YANG
Types";
}
import ietf-key-chain {
prefix key-chain;
reference
"RFC 8177: YANG Data Model for Key Chains";
}
import ietf-netconf-acm {
prefix netconf-acm;
reference
"RFC 8341: Network Configuration Protocol (NETCONF) Access
Control Model";
}
import ietf-tls-server {
prefix tls-server;
reference
"[I-D.ietf-netconf-tls-client-server]: YANG Groupings for TLS
Clients and TLS Servers";
}
import ietf-tls-client {
prefix tls-client;
reference
"[I-D.ietf-netconf-tls-client-server]: YANG Groupings for TLS
Clients and TLS Servers";
}
import ietf-ospf {
prefix ospf;
reference
"[I-D.ietf-ospf-yang]: YANG Data Model for OSPF Protocol";
}
import ietf-isis {
prefix isis;
reference
"[I-D.ietf-isis-yang-isis-cfg]: YANG Data Model for IS-IS
Protocol";
}
organization
"IETF PCE (Path Computation Element) Working Group";
contact
"WG Web:
WG List:
Editor: Dhruv Dhody
";
description
"The YANG module defines a generic configuration and
operational model for PCEP.
Copyright (c) 2019 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see the
RFC itself for full legal notices.";
revision 2019-03-26 {
description
"Initial revision.";
reference
"RFC XXXX: A YANG Data Model for Path Computation
Element Communications Protocol (PCEP)";
}
/*
* Typedefs
*/
typedef pcep-role {
type enumeration {
enum unknown {
value 0;
description
"An unknown role";
}
enum pcc {
value 1;
description
"The role of a Path Computation Client";
}
enum pce {
value 2;
description
"The role of Path Computation Element";
}
enum pcc-and-pce {
value 3;
description
"The role of both Path Computation Client and
Path Computation Element";
}
}
description
"The role of a PCEP speaker.
Takes one of the following values
- unknown(0): the role is not known.
- pcc(1): the role is of a Path Computation
Client (PCC).
- pce(2): the role is of a Path Computation
Server (PCE).
- pccAndPce(3): the role is of both a PCC and
a PCE.";
}
typedef pcep-oper-status {
type enumeration {
enum oper-status-up {
value 1;
description
"The PCEP entity is active";
}
enum oper-status-down {
value 2;
description
"The PCEP entity is inactive";
}
enum oper-status-going-up {
value 3;
description
"The PCEP entity is activating";
}
enum oper-status-going-down {
value 4;
description
"The PCEP entity is deactivating";
}
enum oper-status-failed {
value 5;
description
"The PCEP entity has failed and will recover
when possible.";
}
enum oper-status-failed-perm {
value 6;
description
"The PCEP entity has failed and will not recover
without operator intervention";
}
}
description
"The operational status of the PCEP entity.
Takes one of the following values
- oper-status-up(1): Active
- oper-status-down(2): Inactive
- oper-status-going-up(3): Activating
- oper-status-going-down(4): Deactivating
- oper-status-failed(5): Failed
- oper-status-failed-perm(6): Failed Permanantly";
reference
"RFC 5440: Path Computation Element (PCE) Communication
Protocol (PCEP)";
}
typedef pcep-initiator {
type enumeration {
enum local {
value 1;
description
"The local PCEP entity initiated the session";
}
enum remote {
value 2;
description
"The remote PCEP peer initiated the session";
}
}
description
"The initiator of the session, that is, whether the TCP
connection was initiated by the local PCEP entity or
the remote peer.
Takes one of the following values
- local(1): Initiated locally
- remote(2): Initiated remotely";
}
typedef pcep-sess-state {
type enumeration {
enum tcp-pending {
value 1;
description
"The tcp-pending state of PCEP session.";
}
enum open-wait {
value 2;
description
"The open-wait state of PCEP session.";
}
enum keep-wait {
value 3;
description
"The keep-wait state of PCEP session.";
}
enum session-up {
value 4;
description
"The session-up state of PCEP session.";
}
}
description
"The current state of the session.
The set of possible states excludes the idle state
since entries do not exist in the idle state.
Takes one of the following values
- tcp-pending(1): PCEP TCP Pending state
- open-wait(2): PCEP Open Wait state
- keep-wait(3): PCEP Keep Wait state
- session-up(4): PCEP Session Up state";
reference
"RFC 5440: Path Computation Element (PCE) Communication
Protocol (PCEP)";
}
typedef domain-type {
type enumeration {
enum ospf-area {
value 1;
description
"The OSPF area.";
}
enum isis-area {
value 2;
description
"The IS-IS area.";
}
enum as {
value 3;
description
"The Autonomous System (AS).";
}
}
description
"The PCE Domain Type";
}
typedef domain-ospf-area {
type ospf:area-id-type;
description
"OSPF Area ID.";
reference
"[I-D.ietf-ospf-yang]: YANG Data Model for OSPF Protocol";
}
typedef domain-isis-area {
type isis:area-address;
description
"IS-IS Area ID.";
reference
"[I-D.ietf-isis-yang-isis-cfg]: YANG Data Model for IS-IS
Protocol";
}
typedef domain-as {
type inet:as-number;
description
"Autonomous System number.";
}
typedef domain {
type union {
type domain-ospf-area;
type domain-isis-area;
type domain-as;
}
description
"The Domain Information";
}
typedef operational-state {
type enumeration {
enum down {
value 0;
description
"not active.";
}
enum up {
value 1;
description
"signalled.";
}
enum active {
value 2;
description
"up and carrying traffic.";
}
enum going-down {
value 3;
description
"LSP is being torn down, resources are
being released.";
}
enum going-up {
value 4;
description
"LSP is being signalled.";
}
}
description
"The operational status of the LSP";
reference
"RFC 8231: Path Computation Element Communication Protocol
(PCEP) Extensions for Stateful PCE";
}
typedef sync-state {
type enumeration {
enum pending {
value 0;
description
"The state synchronization
has not started.";
}
enum ongoing {
value 1;
description
"The state synchronization
is ongoing.";
}
enum finished {
value 2;
description
"The state synchronization
is finished.";
}
}
description
"The LSP-DB state synchronization operational
status.";
reference
"RFC 8231: Path Computation Element Communication Protocol
(PCEP) Extensions for Stateful PCE";
}
/*
* Features
*/
feature svec {
description
"Support synchronized path computation.";
reference
"RFC 5440: Path Computation Element (PCE) Communication
Protocol (PCEP)";
}
feature gmpls {
description
"Support GMPLS.";
reference
"[I-D.ietf-pce-gmpls-pcep-extensions]: PCEP extensions for
GMPLS";
}
feature objective-function {
description
"Support OF as per RFC 5541.";
reference
"RFC 5541: Encoding of Objective Functions in the Path
Computation Element Communication Protocol (PCEP)";
}
feature global-concurrent {
description
"Support GCO as per RFC 5557.";
reference
"RFC 5557: Path Computation Element Communication Protocol
(PCEP) Requirements and Protocol Extensions in Support of
Global Concurrent Optimization";
}
feature path-key {
description
"Support path-key as per RFC 5520.";
reference
"RFC 5520: Preserving Topology Confidentiality in Inter-
Domain Path Computation Using a Path-Key-Based Mechanism";
}
feature p2mp {
description
"Support P2MP as per RFC 8306.";
reference
"RFC 8306: Extensions to the Path Computation Element
Communication Protocol (PCEP) for Point-to-Multipoint
Traffic Engineering Label Switched Paths";
}
feature stateful {
description
"Support stateful PCE as per RFC 8231.";
reference
"RFC 8231: Path Computation Element Communication Protocol
(PCEP) Extensions for Stateful PCE";
}
feature sync-opt {
description
"Support stateful sync optimization
as per RFC 8232";
reference
"RFC 8232: Optimizations of Label Switched Path State
Synchronization Procedures for a Stateful PCE";
}
feature pce-initiated {
description
"Support PCE-Initiated LSP as per
RFC 8281.";
reference
"RFC 8281: Path Computation Element Communication Protocol
(PCEP) Extensions for PCE-Initiated LSP Setup in a Stateful
PCE Model";
}
feature tls {
description
"Support PCEP over TLS as per
RFC 8253.";
reference
"RFC 8253: PCEPS: Usage of TLS to Provide a Secure Transport
for the Path Computation Element Communication Protocol
(PCEP)";
}
feature sr {
description
"Support Segment Routing for PCE.";
reference
"[I-D.ietf-pce-segment-routing]: PCEP Extensions for Segment
Routing";
}
feature association {
description
"Support Association in PCEP.";
reference
"[I-D.ietf-pce-association-group]: PCEP Extensions for
Establishing Relationships Between Sets of LSPs";
}
/*
* Identities
*/
identity lsp-error {
if-feature "stateful";
description
"Base LSP error";
reference
"RFC 8231: Path Computation Element Communication Protocol
(PCEP) Extensions for Stateful PCE";
}
identity no-error-lsp-error {
base lsp-error;
if-feature "stateful";
description
"No error, LSP is fine.";
reference
"RFC 8231: Path Computation Element Communication Protocol
(PCEP) Extensions for Stateful PCE";
}
identity unknown-lsp-error {
base lsp-error;
if-feature "stateful";
description
"Unknown reason.";
reference
"RFC 8231: Path Computation Element Communication Protocol
(PCEP) Extensions for Stateful PCE";
}
identity limit-lsp-error {
base lsp-error;
if-feature "stateful";
description
"Limit reached for PCE-controlled LSPs.";
reference
"RFC 8231: Path Computation Element Communication Protocol
(PCEP) Extensions for Stateful PCE";
}
identity pending-lsp-error {
base lsp-error;
if-feature "stateful";
description
"Too many pending LSP update requests.";
reference
"RFC 8231: Path Computation Element Communication Protocol
(PCEP) Extensions for Stateful PCE";
}
identity unacceptable-lsp-error {
base lsp-error;
if-feature "stateful";
description
"Unacceptable parameters.";
reference
"RFC 8231: Path Computation Element Communication Protocol
(PCEP) Extensions for Stateful PCE";
}
identity internal-lsp-error {
base lsp-error;
if-feature "stateful";
description
"Internal error.";
reference
"RFC 8231: Path Computation Element Communication Protocol
(PCEP) Extensions for Stateful PCE";
}
identity admin-lsp-error {
base lsp-error;
if-feature "stateful";
description
"LSP administratively brought down.";
reference
"RFC 8231: Path Computation Element Communication Protocol
(PCEP) Extensions for Stateful PCE";
}
identity preempted-lsp-error {
base lsp-error;
if-feature "stateful";
description
"LSP preempted.";
reference
"RFC 8231: Path Computation Element Communication Protocol
(PCEP) Extensions for Stateful PCE";
}
identity rsvp-lsp-error {
base lsp-error;
if-feature "stateful";
description
"RSVP signaling error.";
reference
"RFC 8231: Path Computation Element Communication Protocol
(PCEP) Extensions for Stateful PCE";
}
/*
* Groupings
*/
grouping pce-scope {
description
"This grouping defines PCE path computation scope
information which maybe relevant to PCE selection.
This information corresponds to PCE auto-discovery
information.";
reference
"RFC 5088: OSPF Protocol Extensions for Path
Computation Element (PCE) Discovery
RFC 5089: IS-IS Protocol Extensions for Path
Computation Element (PCE) Discovery";
leaf path-scope {
type bits {
bit intra-area-scope {
description
"PCE can compute intra-area paths.";
}
bit inter-area-scope {
description
"PCE can compute inter-area paths.";
}
bit inter-area-scope-default {
description
"PCE can act as a default PCE for inter-area
path computation.";
}
bit inter-as-scope {
description
"PCE can compute inter-AS paths.";
}
bit inter-as-scope-default {
description
"PCE can act as a default PCE for inter-AS
path computation.";
}
bit inter-layer-scope {
description
"PCE can compute inter-layer paths.";
}
}
description
"The field corresponding to the path scope bits";
}
leaf intra-area-pref {
type uint8 {
range "0..7";
}
description
"The PCE's preference for intra-area TE LSP
computation.";
}
leaf inter-area-pref {
type uint8 {
range "0..7";
}
description
"The PCE's preference for inter-area TE LSP
computation.";
}
leaf inter-as-pref {
type uint8 {
range "0..7";
}
description
"The PCE's preference for inter-AS TE LSP
computation.";
}
leaf inter-layer-pref {
type uint8 {
range "0..7";
}
description
"The PCE's preference for inter-layer TE LSP
computation.";
}
}
//pce-scope
grouping domain {
description
"This grouping specifies a Domain where the
PCEP speaker has topology visibility.";
leaf domain-type {
type domain-type;
description
"The domain type.";
}
leaf domain {
type domain;
description
"The domain Information.";
}
}
//domain
grouping info {
description
"This grouping specifies all information which
maybe relevant to both PCC and PCE.
This information corresponds to PCE auto-discovery
information.";
container domain {
description
"The local domain for the PCEP entity";
list domain {
key "domain-type domain";
description
"The local domain.";
uses domain {
description
"The local domain for the PCEP entity.";
}
}
}
container capability {
description
"The PCEP entity capability information of local
PCEP entity. This maybe relevant to PCE selection
as well. This information corresponds to PCE auto-
discovery information.";
reference
"RFC 5088: OSPF Protocol Extensions for Path
Computation Element (PCE) Discovery
RFC 5089: IS-IS Protocol Extensions for Path
Computation Element (PCE) Discovery";
leaf capability {
type bits {
bit gmpls {
if-feature "gmpls";
description
"Path computation with GMPLS link
constraints.";
}
bit bi-dir {
description
"Bidirectional path computation.";
}
bit diverse {
description
"Diverse path computation.";
}
bit load-balance {
description
"Load-balanced path computation.";
}
bit synchronize {
if-feature "svec";
description
"Synchronized paths computation.";
}
bit objective-function {
if-feature "objective-function";
description
"Support for multiple objective functions.";
}
bit add-path-constraint {
description
"Support for additive path constraints (max
hop count, etc.).";
}
bit prioritization {
description
"Support for request prioritization.";
}
bit multi-request {
description
"Support for multiple requests per message.";
}
bit global-concurrent {
if-feature "global-concurrent";
description
"Support for Global Concurrent Optimization
(GCO).";
}
bit p2mp {
if-feature "p2mp";
description
"Support for P2MP path computation.";
}
bit active {
if-feature "stateful";
description
"Support for active stateful PCE.";
}
bit passive {
if-feature "stateful";
description
"Support for passive stateful PCE.";
}
bit p2mp-active {
if-feature "stateful";
if-feature "p2mp";
description
"Support for active stateful PCE for P2MP.";
}
bit p2mp-passive {
if-feature "stateful";
if-feature "p2mp";
description
"Support for passive stateful PCE for P2MP.";
}
bit p2mp-pce-initiated {
if-feature "stateful";
if-feature "pce-initiated";
if-feature "p2mp";
description
"Support for PCE-initiated LSP for P2MP.";
}
}
description
"The bits string indicating the capabiliies";
reference
"RFC 5088: OSPF Protocol Extensions for Path
Computation Element (PCE) Discovery
RFC 5089: IS-IS Protocol Extensions for Path
Computation Element (PCE) Discovery";
}
leaf pce-initiated {
if-feature "pce-initiated";
type boolean;
description
"Set to true if PCE-initiated LSP capability is
enabled.";
reference
"RFC 8281: Path Computation Element Communication
Protocol (PCEP) Extensions for PCE-Initiated LSP
Setup in a Stateful PCE Model";
}
leaf include-db-ver {
if-feature "stateful";
if-feature "sync-opt";
type boolean;
description
"Support inclusion of LSP-DB-VERSION
in LSP object";
reference
"RFC 8232: Optimizations of Label Switched Path State
Synchronization Procedures for a Stateful PCE";
}
leaf trigger-resync {
if-feature "stateful";
if-feature "sync-opt";
type boolean;
description
"Support PCE triggered re-synchronization";
reference
"RFC 8232: Optimizations of Label Switched Path State
Synchronization Procedures for a Stateful PCE";
}
leaf trigger-initial-sync {
if-feature "stateful";
if-feature "sync-opt";
type boolean;
description
"PCE triggered initial synchronization";
reference
"RFC 8232: Optimizations of Label Switched Path State
Synchronization Procedures for a Stateful PCE";
}
leaf incremental-sync {
if-feature "stateful";
if-feature "sync-opt";
type boolean;
description
"Support incremental (delta) sync";
reference
"RFC 8232: Optimizations of Label Switched Path State
Synchronization Procedures for a Stateful PCE";
}
container sr {
if-feature "sr";
description
"If segment routing is supported";
reference
"[I-D.ietf-pce-segment-routing]: PCEP Extensions for Segment
Routing";
leaf enabled {
type boolean;
description
"Set to true if SR is enabled";
}
leaf msd-limit {
type boolean;
default "false";
description
"True indicates no limit on MSD, the
leaf msd is ignored";
}
leaf nai {
type boolean;
default "false";
description
"True indicates capability to resolve NAI
to SID";
}
}
//sr
}
//capability
leaf msd {
if-feature "sr";
type uint8;
description
"Maximum SID Depth for SR";
reference
"[I-D.ietf-pce-segment-routing]: PCEP Extensions for Segment
Routing";
}
}
//info
grouping pce-info {
description
"This grouping specifies all PCE information
which maybe relevant to the PCE selection.
This information corresponds to PCE auto-discovery
information.";
container scope {
description
"The path computation scope";
uses pce-scope;
}
container neigh-domains {
description
"The list of neighbour PCE-Domain
toward which a PCE can compute
paths";
list domain {
key "domain-type domain";
description
"The neighbour domain.";
uses domain {
description
"The PCE neighbour domain.";
}
}
}
}
//pce-info
grouping notification-instance-hdr {
description
"This group describes common instance specific data
for notifications.";
leaf peer-addr {
type leafref {
path "/pcep/entity/peers/peer/addr";
}
description
"Reference to peer address";
}
}
// notification-instance-hdr
grouping notification-session-hdr {
description
"This group describes common session instance specific
data for notifications.";
leaf session-initiator {
type leafref {
path "/pcep/entity/peers/peer/sessions/"
+ "session/initiator";
}
description
"Reference to pcep session initiator leaf";
}
}
// notification-session-hdr
grouping of-list {
description
"List of OF";
reference
"RFC 5541: Encoding of Objective Functions in the Path
Computation Element Communication Protocol (PCEP)";
list objective-function {
key "of";
description
"The list of authorized OF";
leaf of {
type identityref {
base te-types:objective-function-type;
}
description
"The OF authorized";
}
}
}
/*
* Configuration data nodes
*/
container pcep {
presence "The PCEP is enabled";
description
"Parameters for list of configured PCEP entities
on the device.";
container entity {
description
"The configured PCEP entity on the device.";
leaf addr {
type inet:ip-address;
mandatory true;
description
"The local Internet address of this PCEP entity.
If operating as a PCE server, the PCEP entity
listens on this address. If operating as a PCC,
the PCEP entity binds outgoing TCP connections
to this address. It is possible for the PCEP entity
to operate both as a PCC and a PCE Server, in which
case it uses this address both to listen for incoming
TCP connections and to bind outgoing TCP connections.";
}
leaf enabled {
type boolean;
default "true";
description
"The administrative status of this PCEP
Entity.";
}
leaf role {
type pcep-role;
mandatory true;
description
"The role that this entity can play.
Takes one of the following values.
- unknown(0): this PCEP Entity role is not
known.
- pcc(1): this PCEP Entity is a PCC.
- pce(2): this PCEP Entity is a PCE.
- pcc-and-pce(3): this PCEP Entity is both
a PCC and a PCE.";
}
leaf description {
type string;
description
"Description of the PCEP entity configured
by the user";
}
leaf speaker-entity-id {
if-feature "sync-opt";
type string;
description
"The Speaker Entity Identifier";
reference
"RFC 8232: Optimizations of Label Switched
Path State Synchronization Procedures for
a Stateful PCE";
}
leaf admin-status {
type boolean;
default "true";
description
"The administrative status of this PCEP Entity.
The value true represents admin status as up.
This is the desired operational status as
currently set by an operator or by default in
the implementation. The value of oper-status
represents the current status of an attempt to
reach this desired status.";
}
leaf index {
type uint32;
config false;
description
"The index of the operational PECP entity";
}
leaf oper-status {
type pcep-oper-status;
config false;
description
"The operational status of the PCEP entity.
Takes one of the following values.
- oper-status-up(1): the PCEP entity is active.
- oper-status-down(2): the PCEP entity is inactive.
- oper-status-going-up(3): the PCEP entity is
activating.
- oper-status-going-down(4): the PCEP entity is
deactivating.
- oper-status-failed(5): the PCEP entity has
failed and will recover when possible.
- oper-status-failed-perm(6): the PCEP entity
has failed and will not recover without
operator intervention.";
}
uses info {
description
"Local PCEP entity information";
}
container pce-info {
when "../role = 'pce'"
+ "or "
+ "../role = 'pcc-and-pce'" {
description
"These fields are applicable when the role is PCE.";
}
description
"The Local PCE Entity PCE information";
uses pce-info {
description
"Local PCE information";
}
container path-key {
if-feature "path-key";
description
"Path-Key Configuration";
reference
"RFC 5520: Preserving Topology Confidentiality in Inter-
Domain Path Computation Using a Path-Key-Based Mechanism";
leaf enabled {
type boolean;
description
"Enabled or Disabled";
}
leaf discard-timer {
type uint32;
units "minutes";
default "10";
description
"A timer to discard unwanted path-keys";
}
leaf reuse-time {
type uint32;
units "minutes";
default "30";
description
"A time after which the path-keys could be reused";
}
leaf pce-id {
type inet:ip-address;
description
"PCE Address to be used in each Path-Key Subobject
(PKS)";
}
}
}
leaf connect-timer {
type uint16 {
range "1..65535";
}
units "seconds";
default "60";
description
"The time in seconds that the PCEP entity will wait
to establish a TCP connection with a peer. If a
TCP connection is not established within this time
then PCEP aborts the session setup attempt.";
reference
"RFC 5440: Path Computation Element (PCE) Communication
Protocol (PCEP)";
}
leaf connect-max-retry {
type uint32;
default "5";
description
"The maximum number of times the system tries to
establish a TCP connection to a peer before the
session with the peer transitions to the idle
state.";
reference
"RFC 5440: Path Computation Element (PCE) Communication
Protocol (PCEP)";
}
leaf init-backoff-timer {
type uint16 {
range "1..65535";
}
units "seconds";
description
"The initial back-off time in seconds for retrying
a failed session setup attempt to a peer.
The back-off time increases for each failed
session setup attempt, until a maximum back-off
time is reached. The maximum back-off time is
max-backoff-timer.";
reference
"RFC 5440: Path Computation Element (PCE) Communication
Protocol (PCEP)";
}
leaf max-backoff-timer {
type uint32;
units "seconds";
description
"The maximum back-off time in seconds for retrying
a failed session setup attempt to a peer.
The back-off time increases for each failed session
setup attempt, until this maximum value is reached.
Session setup attempts then repeat periodically
without any further increase in back-off time.";
reference
"RFC 5440: Path Computation Element (PCE) Communication
Protocol (PCEP)";
}
leaf open-wait-timer {
type uint16 {
range "1..65535";
}
units "seconds";
default "60";
description
"The time in seconds that the PCEP entity will wait
to receive an Open message from a peer after the
TCP connection has come up.
If no Open message is received within this time then
PCEP terminates the TCP connection and deletes the
associated sessions.";
reference
"RFC 5440: Path Computation Element (PCE) Communication
Protocol (PCEP)";
}
leaf keep-wait-timer {
type uint16 {
range "1..65535";
}
units "seconds";
default "60";
description
"The time in seconds that the PCEP entity will wait
to receive a Keepalive or PCErr message from a peer
during session initialization after receiving an
Open message. If no Keepalive or PCErr message is
received within this time then PCEP terminates the
TCP connection and deletes the associated
sessions.";
reference
"RFC 5440: Path Computation Element (PCE) Communication
Protocol (PCEP)";
}
leaf keep-alive-timer {
type uint8;
units "seconds";
default "30";
description
"The keep alive transmission timer that this PCEP
entity will propose in the initial OPEN message of
each session it is involved in. This is the
maximum time between two consecutive messages sent
to a peer. Zero means that the PCEP entity prefers
not to send Keepalives at all.
Note that the actual Keepalive transmission
intervals, in either direction of an active PCEP
session, are determined by negotiation between the
peers as specified by RFC 5440, and so may differ
from this configured value.";
reference
"RFC 5440: Path Computation Element (PCE) Communication
Protocol (PCEP)";
}
leaf dead-timer {
type uint8;
units "seconds";
must '(. > ../keep-alive-timer)' {
error-message "The dead timer must be "
+ "larger than the keep alive timer";
}
default "120";
description
"The dead timer that this PCEP entity will propose
in the initial OPEN message of each session it is
involved in. This is the time after which a peer
should declare a session down if it does not
receive any PCEP messages. Zero suggests that the
peer does not run a dead timer at all.";
reference
"RFC 5440: Path Computation Element (PCE) Communication
Protocol (PCEP)";
}
leaf allow-negotiation {
type boolean;
description
"Whether the PCEP entity will permit negotiation of
session parameters.";
}
leaf max-keep-alive-timer {
type uint8;
units "seconds";
description
"In PCEP session parameter negotiation in seconds,
the maximum value that this PCEP entity will
accept from a peer for the interval between
Keepalive transmissions. Zero means that the PCEP
entity will allow no Keepalive transmission at
all.";
}
leaf max-dead-timer {
type uint8;
units "seconds";
description
"In PCEP session parameter negotiation in seconds,
the maximum value that this PCEP entity will accept
from a peer for the Dead timer. Zero means that
the PCEP entity will allow not running a Dead
timer.";
}
leaf min-keep-alive-timer {
type uint8;
units "seconds";
description
"In PCEP session parameter negotiation in seconds,
the minimum value that this PCEP entity will
accept for the interval between Keepalive
transmissions. Zero means that the PCEP entity
insists on no Keepalive transmission at all.";
}
leaf min-dead-timer {
type uint8;
units "seconds";
description
"In PCEP session parameter negotiation in
seconds, the minimum value that this PCEP entity
will accept for the Dead timer. Zero means that
the PCEP entity insists on not running a Dead
timer.";
}
leaf sync-timer {
if-feature "svec";
type uint16;
units "seconds";
default "60";
description
"The value of SyncTimer in seconds is used in the
case of synchronized path computation request
using the SVEC object. Consider the case where a
PCReq message is received by a PCE that contains
the SVEC object referring to M synchronized path
computation requests. If after the expiration of
the SyncTimer all the M path computation requests
have not been, received a protocol error is
triggered and the PCE MUST cancel the whole set
of path computation requests.
The aim of the SyncTimer is to avoid the storage
of unused synchronized requests should one of
them get lost for some reasons (for example, a
misbehaving PCC).
Zero means that the PCEP entity does not use the
SyncTimer.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf request-timer {
type uint16 {
range "1..65535";
}
units "seconds";
description
"The maximum time that the PCEP entity will wait
for a response to a PCReq message.";
}
leaf max-sessions {
type uint32;
description
"Maximum number of sessions involving this PCEP
entity that can exist at any time.";
}
leaf max-unknown-reqs {
type uint32;
default "5";
description
"The maximum number of unrecognized requests and
replies that any session on this PCEP entity is
willing to accept per minute before terminating
the session.
A PCRep message contains an unrecognized reply
if it contains an RP object whose request ID
does not correspond to any in-progress request
sent by this PCEP entity.
A PCReq message contains an unrecognized request
if it contains an RP object whose request ID is
zero.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf max-unknown-msgs {
type uint32;
default "5";
description
"The maximum number of unknown messages that any
session on this PCEP entity is willing to accept
per minute before terminating the session.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf pcep-notification-max-rate {
type uint32;
mandatory true;
description
"This variable indicates the maximum number of
notifications issued per second. If events
occur more rapidly, the implementation may
simply fail to emit these notifications during
that period, or may queue them until an
appropriate time. A value of 0 means no
notifications are emitted and all should be
discarded (that is, not queued).";
}
container stateful-parameter {
if-feature "stateful";
description
"The configured stateful PCE parameters";
leaf state-timeout {
type uint32;
units "seconds";
description
"When a PCEP session is terminated, a PCC
waits for this time period before flushing
LSP state associated with that PCEP session
and reverting to operator-defined default
parameters or behaviours.";
}
leaf redelegation-timeout {
when "../../role = 'pcc'"
+ "or "
+ "../../role = 'pcc-and-pce'" {
description
"This field is applicable when the role is
PCC";
}
type uint32;
units "seconds";
description
"When a PCEP session is terminated, a PCC
waits for this time period before revoking
LSP delegation to a PCE and attempting to
redelegate LSPs associated with the
terminated PCEP session to an alternate
PCE.";
}
leaf rpt-non-pcep-lsp {
when "../../role = 'pcc'"
+ "or "
+ "../../role = 'pcc-and-pce'" {
description
"This field is applicable when the role is
PCC";
}
type boolean;
default "true";
description
"If set, a PCC reports LSPs that are not
controlled by any PCE (for example, LSPs
that are statically configured at the
PCC). ";
}
reference
"RFC 8231: Path Computation Element Communication Protocol
(PCEP) Extensions for Stateful PCE";
}
container of-list {
when "../role = 'pce'"
+ "or "
+ "../role = 'pcc-and-pce'" {
description
"These field are applicable when the role is
PCE";
}
if-feature "objective-function";
uses of-list;
description
"The authorized OF-List at PCE for all peers";
}
container lsp-db {
if-feature "stateful";
config false;
description
"The LSP-DB";
leaf db-ver {
when "../../role = 'pcc'"
+ "or "
+ "../../role = 'pcc-and-pce'" {
description
"This field is applicable when the role is
PCC";
}
if-feature "sync-opt";
type uint64;
description
"The LSP State Database Version Number";
}
list association-list {
if-feature "association";
key "type id source global-source extended-id";
description
"List of all PCEP associations";
reference
"[I-D.ietf-pce-association-group]: PCEP
Extensions for Establishing Relationships
Between Sets of LSPs";
leaf type {
type identityref {
base te-types:association-type;
}
description
"The PCEP association type";
}
leaf id {
type uint16;
description
"PCEP Association ID";
}
leaf source {
type inet:ip-address;
description
"PCEP Association Source.";
}
leaf global-source {
type uint32;
description
"PCEP Association Global Source.";
}
leaf extended-id {
type string;
description
"Additional information to support unique
identification.";
}
list lsp {
key "plsp-id pcc-id";
description
"List of all LSP in this association";
leaf plsp-id {
type leafref {
path "/pcep/entity/lsp-db/"
+ "lsp/plsp-id";
}
description
"Reference to PLSP-ID in LSP-DB";
}
leaf pcc-id {
type leafref {
path "/pcep/entity/lsp-db/"
+ "lsp/pcc-id";
}
description
"Reference to PCC-ID in LSP-DB";
}
}
}
list lsp {
key "plsp-id pcc-id";
description
"List of all LSPs in LSP-DB";
leaf plsp-id {
type uint32 {
range "1..1048575";
}
description
"A PCEP-specific identifier for the LSP. A PCC
creates a unique PLSP-ID for each LSP that is
constant for the lifetime of a PCEP session.
PLSP-ID is 20 bits with 0 and 0xFFFFF are
reserved";
}
leaf pcc-id {
type inet:ip-address;
description
"The local internet address of the PCC, that
generated the PLSP-ID.";
}
container lsp-ref {
description
"reference to ietf-te lsp state";
leaf source {
type leafref {
path "/te:te/te:lsps-state/te:lsp/te:source";
}
description
"Tunnel sender address extracted from
SENDER_TEMPLATE object";
reference
"RFC 3209: RSVP-TE: Extensions to RSVP for
LSP Tunnels";
}
leaf destination {
type leafref {
path "/te:te/te:lsps-state/te:lsp/te:"
+ "destination";
}
description
"Tunnel endpoint address extracted from
SESSION object";
reference
"RFC 3209: RSVP-TE: Extensions to RSVP for
LSP Tunnels";
}
leaf tunnel-id {
type leafref {
path "/te:te/te:lsps-state/te:lsp/te:tunnel-id";
}
description
"Tunnel identifier used in the SESSION
that remains constant over the life
of the tunnel.";
reference
"RFC 3209: RSVP-TE: Extensions to RSVP for
LSP Tunnels";
}
leaf lsp-id {
type leafref {
path "/te:te/te:lsps-state/te:lsp/te:lsp-id";
}
description
"Identifier used in the SENDER_TEMPLATE
and the FILTER_SPEC that can be changed
to allow a sender to share resources with
itself.";
reference
"RFC 3209: RSVP-TE: Extensions to RSVP for
LSP Tunnels";
}
leaf extended-tunnel-id {
type leafref {
path "/te:te/te:lsps-state/te:lsp/te:"
+ "extended-tunnel-id";
}
description
"Extended Tunnel ID of the LSP.";
reference
"RFC 3209: RSVP-TE: Extensions to RSVP for
LSP Tunnels";
}
}
leaf admin-state {
type boolean;
description
"The desired operational state";
}
leaf operational-state {
type operational-state;
description
"The operational status of the LSP";
}
container delegated {
description
"The delegation related parameters";
leaf enabled {
type boolean;
description
"LSP is delegated or not";
}
leaf peer {
type leafref {
path "/pcep/entity/peers/peer/addr";
}
must '(../enabled = true())' {
error-message "The LSP must be delegated";
}
description
"At the PCC, the reference to the PCEP peer to
which LSP is delegated; At the PCE, the
reference to the PCEP peer which delegated this
LSP";
}
leaf srp-id {
type uint32;
description
"The last SRP-ID-number associated with this
LSP.";
}
}
container initiation {
if-feature "pce-initiated";
description
"The PCE initiation related parameters";
reference
"RFC 8281: Path Computation Element Communication
Protocol (PCEP) Extensions for PCE-Initiated LSP
Setup in a Stateful PCE Model";
leaf enabled {
type boolean;
description
"Set to true if this LSP is initiated by a PCE";
}
leaf peer {
type leafref {
path "/pcep/entity/peers/peer/addr";
}
must '(../enabled = true())' {
error-message "The LSP must be PCE-Initiated";
}
description
"At the PCC, the reference to the PCEP peer
that initiated this LSP; At the PCE, the
reference to the PCEP peer where the LSP
is initiated";
}
}
leaf symbolic-path-name {
type string;
description
"The symbolic path name associated with the LSP.";
reference
"RFC 8231: Path Computation Element Communication
Protocol (PCEP) Extensions for Stateful PCE";
}
leaf last-error {
type identityref {
base lsp-error;
}
description
"The last error for the LSP.";
}
leaf pst {
type identityref {
base te-types:path-signaling-type;
}
default "te-types:path-setup-rsvp";
description
"The Path Setup Type";
reference
"RFC 8408: Conveying Path Setup Type in PCE
Communication Protocol (PCEP) Messages";
}
list association-list {
if-feature "association";
key "type id source global-source extended-id";
description
"List of all PCEP associations";
leaf type {
type leafref {
path "/pcep/entity/lsp-db/"
+ "association-list/type";
}
description
"PCEP Association Type";
}
leaf id {
type leafref {
path "/pcep/entity/lsp-db/"
+ "association-list/id";
}
description
"PCEP Association ID";
}
leaf source {
type leafref {
path "/pcep/entity/lsp-db/"
+ "association-list/source";
}
description
"PCEP Association Source.";
}
leaf global-source {
type leafref {
path "/pcep/entity/lsp-db/"
+ "association-list/global-source";
}
description
"PCEP Association Global Source.";
}
leaf extended-id {
type leafref {
path "/pcep/entity/lsp-db/"
+ "association-list/extended-id";
}
description
"Additional information to
support unique identification.";
}
reference
"[I-D.ietf-pce-association-group]: PCEP
Extensions for Establishing Relationships
Between Sets of LSPs";
}
}
}
container path-keys {
when "../role = 'pce' or ../role = 'pcc-and-pce'" {
description
"These fields are applicable when the role is
PCE";
}
if-feature "path-key";
config false;
description
"The path-keys generated by the PCE";
reference
"RFC 5520: Preserving Topology Confidentiality
in Inter-Domain Path Computation Using a Path-
Key-Based Mechanism";
list path-keys {
key "path-key";
description
"The list of path-keys generated by the PCE";
leaf path-key {
type uint16;
description
"The identifier, or token used to represent
the Confidential Path Segment (CPS) within
the context of the PCE";
}
container cps {
description
"The Confidential Path Segment (CPS)";
list explicit-route-objects {
key "index";
description
"List of explicit route objects";
leaf index {
type uint32;
description
"ERO subobject index";
}
uses te-types:explicit-route-hop;
}
}
leaf pcc-original {
type leafref {
path "/pcep/entity/peers/peer/addr";
}
description
"Reference to PCC peer address of
the original request";
}
leaf req-id {
type uint32;
description
"The request ID of the original PCReq.";
}
leaf retrieved {
type boolean;
description
"If path-key has been retrieved yet";
}
leaf pcc-retrieved {
type leafref {
path "/pcep/entity/peers/peer/addr";
}
must '(../retrieved = true())' {
error-message "The Path-key should be retreived";
}
description
"Reference to PCC peer address which
retreived the path-key";
}
leaf creation-time {
type yang:timestamp;
description
"The timestamp value at the time this Path-Key
was created.";
}
leaf discard-time {
type uint32;
units "minutes";
description
"A time after which this path-keys will be
discarded";
}
leaf reuse-time {
type uint32;
units "minutes";
description
"A time after which this path-keys could be
reused";
}
}
}
container peers {
description
"The list of configured peers for the
entity (remote PCE)";
list peer {
key "addr";
description
"The peer configured for the entity.
(remote PCE)";
leaf addr {
type inet:ip-address;
description
"The local Internet address of this
PCEP peer.";
}
leaf role {
type pcep-role;
mandatory true;
description
"The role of the PCEP Peer.
Takes one of the following values.
- unknown(0): this PCEP peer role is not
known.
- pcc(1): this PCEP peer is a PCC.
- pce(2): this PCEP peer is a PCE.
- pcc-and-pce(3): this PCEP peer
is both a PCC and a PCE.";
}
leaf description {
type string;
description
"Description of the PCEP peer
configured by the user";
}
uses info {
description
"PCE Peer information";
}
container pce-info {
uses pce-info {
description
"PCE Peer information";
}
description
"The PCE Peer information";
}
leaf delegation-pref {
if-feature "stateful";
type uint8 {
range "0..7";
}
description
"The PCE peer delegation preference.";
}
container auth {
description
"The Authentication options";
choice auth-type-selection {
description
"Options for expressing authentication
setting.";
case auth-key-chain {
leaf key-chain {
type key-chain:key-chain-ref;
description
"key-chain name.";
}
}
case auth-key {
leaf crypto-algorithm {
type identityref {
base key-chain:crypto-algorithm;
}
mandatory true;
description
"Cryptographic algorithm associated
with key.";
}
choice key-string-style {
description
"Key string styles";
case keystring {
leaf keystring {
netconf-acm:default-deny-all;
type string;
description
"Key string in ASCII format.";
}
}
case hexadecimal {
if-feature "key-chain:hex-key-string";
leaf hexadecimal-string {
netconf-acm:default-deny-all;
type yang:hex-string;
description
"Key in hexadecimal string format. When
compared to ASCII, specification in
hexadecimal affords greater key entropy
with the same number of internal
key-string octets. Additionally, it
discourages usage of well-known words or
numbers.";
}
}
}
}
case auth-tls {
if-feature "tls";
choice role {
description
"The role of the local entity";
case server {
container tls-server {
uses tls-server:tls-server-grouping {
description
"Server TLS information.";
}
description
"TLS related information";
}
}
case client {
container tls-client {
uses tls-client:tls-client-grouping {
description
"Client TLS information.";
}
description
"TLS related information";
}
}
}
}
}
}
leaf discontinuity-time {
type yang:timestamp;
config false;
description
"The timestamp of the time when the information and
statistics were last reset.";
}
leaf initiate-session {
type boolean;
config false;
description
"Indicates whether the local PCEP entity initiates
sessions to this peer, or waits for the peer to
initiate a session.";
}
leaf session-exists {
type boolean;
config false;
description
"Indicates whether a session with
this peer currently exists.";
}
leaf session-up-time {
type yang:timestamp;
config false;
description
"The timestamp value of the last time a
session with this peer was successfully
established.";
}
leaf session-fail-time {
type yang:timestamp;
config false;
description
"The timestamp value of the last time a
session with this peer failed to be
established.";
}
leaf session-fail-up-time {
type yang:timestamp;
config false;
description
"The timestamp value of the last time a
session with this peer failed from
active.";
}
container sessions {
config false;
description
"This entry represents a single PCEP
session in which the local PCEP entity participates.
This entry exists only if the corresponding PCEP
session has been initialized by some event, such as
manual user configuration, auto-discovery of a peer,
or an incoming TCP connection.";
list session {
key "initiator";
description
"The list of sessions, note that for a time being
two sessions may exist for a peer";
leaf initiator {
type pcep-initiator;
description
"The initiator of the session,that is, whether
the TCP connection was initiated by the local
PCEP entity or the peer.
There is a window during session
initialization where two sessions can exist
between a pair of PCEP speakers, each
initiated by one of the speakers. One of
these sessions is always discarded before it
leaves OpenWait state. However, before it is
discarded, two sessions to the given peer
appear transiently in this yang module. The
sessions are distinguished by who initiated
them, and so this field is the key.";
}
leaf role {
type leafref {
path "/pcep/entity/role";
}
description
"The reference to peer role .";
}
leaf state-last-change {
type yang:timestamp;
description
"The timestamp value at the time this
session entered its current state as
denoted by the state leaf.";
}
leaf state {
type pcep-sess-state;
description
"The current state of the session.
The set of possible states excludes the
idle state since entries do not exist
in the idle state.";
}
leaf session-creation {
type yang:timestamp;
description
"The timestamp value at the time this
session was created.";
}
leaf connect-retry {
type yang:counter32;
description
"The number of times that the local PCEP
entity has attempted to establish a TCP
connection for this session without
success. The PCEP entity gives up when
this reaches connect-max-retry.";
}
leaf local-id {
type uint8;
description
"The value of the PCEP session ID used by
the local PCEP entity in the Open message
for this session. If state is tcp-pending
then this is the session ID that will be
used in the Open message. Otherwise, this
is the session ID that was sent in the
Open message.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf remote-id {
type uint8;
must "((../state != 'tcp-pending'"
+ "and "
+ "../state != 'open-wait' )"
+ "or "
+ "((../state = 'tcp-pending'"
+ " or "
+ "../state = 'open-wait' )"
+ "and (. = 0)))" {
error-message "Invalid remote-id";
description
"If state is tcp-pending or open-wait then
this leaf is not used and MUST be set to
zero.";
}
description
"The value of the PCEP session ID used by the
peer in its Open message for this session.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf keepalive-timer {
type uint8;
units "seconds";
must "(../state = 'session-up'"
+ "or "
+ "(../state != 'session-up'"
+ "and (. = 0)))" {
error-message "Invalid keepalive timer";
description
"This field is used if and only if state is
session-up. Otherwise, it is not used and
MUST be set to zero.";
}
description
"The agreed maximum interval at which the local
PCEP entity transmits PCEP messages on this PCEP
session. Zero means that the local PCEP entity
never sends Keepalives on this session.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf peer-keepalive-timer {
type uint8;
units "seconds";
must "(../state = 'session-up'"
+ "or "
+ "(../state != 'session-up'"
+ "and "
+ "(. = 0)))" {
error-message "Invalid Peer keepalive timer";
description
"This field is used if and only if state is
session-up. Otherwise, it is not used and MUST
be set to zero.";
}
description
"The agreed maximum interval at which the peer
transmits PCEP messages on this PCEP session.
Zero means that the peer never sends Keepalives
on this session.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf dead-timer {
type uint8;
units "seconds";
description
"The dead timer interval for this PCEP session.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf peer-dead-timer {
type uint8;
units "seconds";
must "((../state != 'tcp-pending'"
+ "and "
+ "../state != 'open-wait' )"
+ "or "
+ "((../state = 'tcp-pending'"
+ " or "
+ "../state = 'open-wait' )"
+ "and "
+ "(. = 0)))" {
error-message "Invalid Peer Dead timer";
description
"If state is tcp-pending or open-wait then this
leaf is not used and MUST be set to zero.";
}
description
"The peer's dead-timer interval
for this PCEP session.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf ka-hold-time-rem {
type uint8;
units "seconds";
must "((../state != 'tcp-pending'"
+ "and "
+ "../state != 'open-wait' ) "
+ "or "
+ "((../state = 'tcp-pending'"
+ "or "
+ "../state = 'open-wait' )"
+ "and "
+ "(. = 0)))" {
error-message
"Invalid Keepalive hold time remaining";
description
"If state is tcp-pending or open-wait then this
field is not used and MUST be set to zero.";
}
description
"The keep alive hold time remaining for this
session.";
}
leaf overloaded {
type boolean;
description
"If the local PCEP entity has informed the peer that
it is currently overloaded, then this is set to true.
Otherwise, it is set to false.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf overload-time {
type uint32;
units "seconds";
must '((../overloaded = true()) '
+ 'or ((../overloaded != true()) '
+ 'and (. = 0)))' {
error-message "Invalid overload-time";
description
"This field is only used if overloaded is set to
true. Otherwise, it is not used and MUST be set
to zero.";
}
description
"The interval of time that is remaining until the
local PCEP entity will cease to be overloaded on
this session.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf peer-overloaded {
type boolean;
description
"If the peer has informed the local PCEP entity
that it is currently overloaded, then this is
set to true. Otherwise, it is set to false.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf peer-overload-time {
type uint32;
units "seconds";
must '((../peer-overloaded = '
+ 'true()) or '
+ '((../peer-overloaded !='
+ 'true())'
+ ' and '
+ '(. = 0)))' {
error-message "Invalid peer overload time";
description
"This field is only used if peer-overloaded
is set to true. Otherwise, it is not used
and MUST be set to zero.";
}
description
"The interval of time that is remaining until
the peer will cease to be overloaded. If it
is not known how long the peer will stay in
overloaded state, this leaf is set to zero.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf lspdb-sync {
if-feature "stateful";
type sync-state;
description
"The LSP-DB state synchronization status.";
reference
"RFC 8231: Path Computation Element Communication
Protocol (PCEP) Extensions for Stateful PCE";
}
leaf recv-db-ver {
when "../role = 'pcc'"
+ "or "
+ "../role = 'pcc-and-pce'" {
description
"This field is applicable when the role is
PCC";
}
if-feature "stateful";
if-feature "sync-opt";
type uint64;
description
"The last received LSP State Database Version
Number";
reference
"RFC 8231: Path Computation Element Communication
Protocol (PCEP) Extensions for Stateful PCE";
}
container of-list {
when "../role = 'pce'"
+ "or "
+ "../role = 'pcc-and-pce'" {
description
"These fields are applicable when the role is
PCE";
}
if-feature "objective-function";
uses of-list;
description
"Indicate the list of supported OF on this
session";
reference
"RFC 5541: Encoding of Objective Functions in
the Path Computation Element Communication
Protocol (PCEP)";
}
container pst-list {
when "../role = 'pce'"
+ "or "
+ "../role = 'pcc-and-pce'" {
description
"These fields are applicable when the role is
PCE";
}
description
"Indicate the list of supported
PST on this session";
reference
"RFC 8408: Conveying Path Setup Type in PCE
Communication Protocol (PCEP) Messages";
list path-setup-type {
key "pst";
description
"The list of authorized PST";
leaf pst {
type identityref {
base te-types:path-signaling-type;
}
description
"The PST authorized";
}
}
}
container assoc-type-list {
if-feature "association";
description
"Indicate the list of supported association types
on this session";
reference
"[I-D.ietf-pce-association-group]: PCEP
Extensions for Establishing Relationships
Between Sets of LSPs";
list assoc-type {
key "at";
description
"The list of authorized association types";
leaf at {
type identityref {
base te-types:association-type;
}
description
"The association type authorized";
}
}
}
leaf speaker-entity-id {
if-feature "sync-opt";
type string;
description
"The Speaker Entity Identifier";
reference
"RFC 8232: Optimizations of Label Switched
Path State Synchronization Procedures for
a Stateful PCE";
}
leaf discontinuity-time {
type yang:timestamp;
description
"The timestamp value of the time when the
statistics were last reset.";
}
}
// session
}
// sessions
}
//peer
}
//peers
}
//entity
}
//pcep
/*
* Notifications
*/
notification pcep-session-up {
description
"This notification is sent when the value of
'/pcep/peers/peer/sessions/session/state'
enters the 'session-up' state.";
uses notification-instance-hdr;
uses notification-session-hdr;
leaf state-last-change {
type yang:timestamp;
description
"The timestamp value at the time this session
entered its current state as denoted by the state
leaf.";
}
leaf state {
type pcep-sess-state;
description
"The current state of the session.
The set of possible states excludes the idle state
since entries do not exist in the idle state.";
}
reference
"RFC 5440: Path Computation Element (PCE) Communication
Protocol (PCEP)";
}
//notification
notification pcep-session-down {
description
"This notification is sent when the value of
'/pcep/peers/peer/sessions/session/state'
leaves the 'session-up' state.";
uses notification-instance-hdr;
leaf session-initiator {
type pcep-initiator;
description
"The initiator of the session.";
}
leaf state-last-change {
type yang:timestamp;
description
"The timestamp value at the time this session
entered its current state as denoted by the state
leaf.";
}
leaf state {
type pcep-sess-state;
description
"The current state of the session.
The set of possible states excludes the idle state
since entries do not exist in the idle state.";
}
reference
"RFC 5440: Path Computation Element (PCE) Communication
Protocol (PCEP)";
}
//notification
notification pcep-session-local-overload {
description
"This notification is sent when the local PCEP entity
enters overload state for a peer.";
uses notification-instance-hdr;
uses notification-session-hdr;
leaf overloaded {
type boolean;
description
"If the local PCEP entity has informed the peer
that it is currently overloaded, then this is set
to true. Otherwise, it is set to false.";
}
leaf overload-time {
type uint32;
units "seconds";
description
"The interval of time that is remaining until the
local PCEP entity will cease to be overloaded on
this session.";
}
reference
"RFC 5440: Path Computation Element (PCE) Communication
Protocol (PCEP)";
}
//notification
notification pcep-session-local-overload-clear {
description
"This notification is sent when the local PCEP entity
leaves overload state for a peer.";
uses notification-instance-hdr;
leaf overloaded {
type boolean;
description
"If the local PCEP entity has informed the peer
that it is currently overloaded, then this is set
to true. Otherwise, it is set to false.";
}
reference
"RFC 5440: Path Computation Element (PCE) Communication
Protocol (PCEP)";
}
//notification
notification pcep-session-peer-overload {
description
"This notification is sent when a peer enters overload
state.";
uses notification-instance-hdr;
uses notification-session-hdr;
leaf peer-overloaded {
type boolean;
description
"If the peer has informed the local PCEP entity that
it is currently overloaded, then this is set to
true. Otherwise, it is set to false.";
}
leaf peer-overload-time {
type uint32;
units "seconds";
description
"The interval of time that is remaining until the
peer will cease to be overloaded. If it is not
known how long the peer will stay in overloaded
state, this leaf is set to zero.";
}
reference
"RFC 5440: Path Computation Element (PCE) Communication
Protocol (PCEP)";
}
//notification
notification pcep-session-peer-overload-clear {
description
"This notification is sent when a peer leaves overload
state.";
uses notification-instance-hdr;
leaf peer-overloaded {
type boolean;
description
"If the peer has informed the local PCEP entity that
it is currently overloaded, then this is set to
true. Otherwise, it is set to false.";
}
reference
"RFC 5440: Path Computation Element (PCE) Communication
Protocol (PCEP)";
}
//notification
/*
* RPC
*/
rpc trigger-resync {
if-feature "stateful";
if-feature "sync-opt";
description
"Trigger the resyncrinization at the PCE";
reference
"RFC 8232: Optimizations of Label Switched Path State
Synchronization Procedures for a Stateful PCE";
input {
leaf pcc {
type leafref {
path "/pcep/entity/peers/peer/addr";
}
description
"The IP address to identify the PCC. The state
syncronization is re-triggered for all LSPs from
the PCC. The rpc on the PCC will be ignored.";
}
}
//input
}
//rpc
}
]]>
file "ietf-pcep-stats@2019-03-26.yang"
module ietf-pcep-stats {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-pcep-stats";
prefix pcep-stats;
import ietf-pcep {
prefix pcep;
reference
"RFC XXXX: A YANG Data Model for Path Computation
Element Communications Protocol (PCEP)";
}
import ietf-yang-types {
prefix yang;
reference
"RFC 6991: Common YANG Data Types";
}
organization
"IETF PCE (Path Computation Element) Working Group";
contact
"WG Web:
WG List:
Editor: Dhruv Dhody
";
description
"The YANG module augments the PCEP yang operational
model with statistics, counters and telemetry data.
Copyright (c) 2019 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(httpcep://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see the
RFC itself for full legal notices.";
revision 2019-03-26 {
description
"Initial revision.";
reference
"RFC XXXX: A YANG Data Model for Path Computation
Element Communications Protocol (PCEP)";
}
/*
* Groupings
*/
grouping pcep-stats {
description
"This grouping defines statistics for PCEP. It is used
for both peer and current session.";
leaf avg-rsp-time {
when "../../pcep:role = 'pce'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type uint32;
units "milliseconds";
description
"The average response time. If an average response time
has not been calculated then this leaf has the value
zero.";
}
leaf lwm-rsp-time {
when "../../pcep:role = 'pce'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type uint32;
units "milliseconds";
description
"The smallest (low-water mark) response time seen.
If no responses have been received then this leaf has
the value zero.";
}
leaf hwm-rsp-time {
when "../../pcep:role = 'pce'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type uint32;
units "milliseconds";
description
"The greatest (high-water mark) response time seen.
If no responses have been received then this object
has the value zero.";
}
leaf num-pcreq-sent {
when "../../pcep:role = 'pce'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of PCReq messages sent.";
}
leaf num-pcreq-rcvd {
when "../../pcep:role = 'pcc'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of PCReq messages received.";
}
leaf num-pcrep-sent {
when "../../pcep:role = 'pcc'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of PCRep messages sent.";
}
leaf num-pcrep-rcvd {
when "../../pcep:role = 'pce'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of PCRep messages received.";
}
leaf num-pcerr-sent {
type yang:counter32;
description
"The number of PCErr messages sent.";
}
leaf num-pcerr-rcvd {
type yang:counter32;
description
"The number of PCErr messages received.";
}
leaf num-pcntf-sent {
type yang:counter32;
description
"The number of PCNtf messages sent.";
}
leaf num-pcntf-rcvd {
type yang:counter32;
description
"The number of PCNtf messages received.";
}
leaf num-keepalive-sent {
type yang:counter32;
description
"The number of Keepalive messages sent.";
}
leaf num-keepalive-rcvd {
type yang:counter32;
description
"The number of Keepalive messages received.";
}
leaf num-unknown-rcvd {
type yang:counter32;
description
"The number of unknown messages received.";
}
leaf num-corrupt-rcvd {
type yang:counter32;
description
"The number of corrupted PCEP message received.";
}
leaf num-req-sent {
when "../../pcep:role = 'pce'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of requests sent. A request corresponds
1:1 with an RP object in a PCReq message. This might
be greater than num-pcreq-sent because multiple
requests can be batched into a single PCReq
message.";
}
leaf num-req-sent-pend-rep {
when "../../pcep:role = 'pce'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of requests that have been sent for
which a response is still pending.";
}
leaf num-req-sent-ero-rcvd {
when "../../pcep:role = 'pce'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of requests that have been sent for
which a response with an ERO object was received.
Such responses indicate that a path was
successfully computed by the peer.";
}
leaf num-req-sent-nopath-rcvd {
when "../../pcep:role = 'pce'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of requests that have been sent for
which a response with a NO-PATH object was
received. Such responses indicate that the peer
could not find a path to satisfy the
request.";
}
leaf num-req-sent-cancel-rcvd {
when "../../pcep:role = 'pce'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of requests that were cancelled with
a PCNtf message. This might be different than
num-pcntf-rcvd because not all PCNtf messages are
used to cancel requests, and a single PCNtf message
can cancel multiple requests.";
}
leaf num-req-sent-error-rcvd {
when "../../pcep:role = 'pce'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of requests that were rejected with a
PCErr message. This might be different than
num-pcerr-rcvd because not all PCErr messages are
used to reject requests, and a single PCErr message
can reject multiple requests.";
}
leaf num-req-sent-timeout {
when "../../pcep:role = 'pce'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of requests that have been sent to a peer
and have been abandoned because the peer has taken too
long to respond to them.";
}
leaf num-req-sent-cancel-sent {
when "../../pcep:role = 'pce'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of requests that were sent to the peer and
explicitly cancelled by the local PCEP entity sending
a PCNtf.";
}
leaf num-req-rcvd {
when "../../pcep:role = 'pcc'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of requests received. A request
corresponds 1:1 with an RP object in a PCReq
message.
This might be greater than num-pcreq-rcvd because
multiple requests can be batched into a single
PCReq message.";
}
leaf num-req-rcvd-pend-rep {
when "../../pcep:role = 'pcc'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of requests that have been received for
which a response is still pending.";
}
leaf num-req-rcvd-ero-sent {
when "../../pcep:role = 'pcc'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of requests that have been received for
which a response with an ERO object was sent. Such
responses indicate that a path was successfully
computed by the local PCEP entity.";
}
leaf num-req-rcvd-nopath-sent {
when "../../pcep:role = 'pcc'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of requests that have been received for
which a response with a NO-PATH object was sent. Such
responses indicate that the local PCEP entity could
not find a path to satisfy the request.";
}
leaf num-req-rcvd-cancel-sent {
when "../../pcep:role = 'pcc'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of requests received that were cancelled
by the local PCEP entity sending a PCNtf message.
This might be different than num-pcntf-sent because
not all PCNtf messages are used to cancel requests,
and a single PCNtf message can cancel multiple
requests.";
}
leaf num-req-rcvd-error-sent {
when "../../pcep:role = 'pcc'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of requests received that were cancelled
by the local PCEP entity sending a PCErr message.
This might be different than num-pcerr-sent because
not all PCErr messages are used to cancel requests,
and a single PCErr message can cancel multiple
requests.";
}
leaf num-req-rcvd-cancel-rcvd {
when "../../pcep:role = 'pcc'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of requests that were received from the
peer and explicitly cancelled by the peer sending
a PCNtf.";
}
leaf num-rep-rcvd-unknown {
when "../../pcep:role = 'pce'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of responses to unknown requests
received. A response to an unknown request is a
response whose RP object does not contain the
request ID of any request that is currently
outstanding on the session.";
}
leaf num-req-rcvd-unknown {
when "../../pcep:role = 'pcc'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of unknown requests that have been
received. An unknown request is a request
whose RP object contains a request ID of zero.";
}
container svec {
if-feature "pcep:svec";
description
"If synchronized path computation is supported";
leaf num-svec-sent {
when "../../../pcep:role = 'pce'"
+ "or "
+ "../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of SVEC objects sent in PCReq messages.
An SVEC object represents a set of synchronized
requests.";
}
leaf num-svec-req-sent {
when "../../../pcep:role = 'pce'"
+ "or "
+ "../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of requests sent that appeared in one
or more SVEC objects.";
}
leaf num-svec-rcvd {
when "../../../pcep:role = 'pcc'"
+ "or "
+ "../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of SVEC objects received in PCReq
messages. An SVEC object represents a set of
synchronized requests.";
}
leaf num-svec-req-rcvd {
when "../../../pcep:role = 'pcc'"
+ "or "
+ "../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of requests received that appeared
in one or more SVEC objects.";
}
}
//svec
container stateful {
if-feature "pcep:stateful";
description
"Stateful PCE related statistics";
leaf num-pcrpt-sent {
when "../../../pcep:role = 'pce'"
+ "or "
+ "../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of PCRpt messages sent.";
}
leaf num-pcrpt-rcvd {
when "../../../pcep:role = 'pcc'"
+ "or "
+ "../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of PCRpt messages received.";
}
leaf num-pcupd-sent {
when "../../../pcep:role = 'pcc'"
+ "or "
+ "../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of PCUpd messages sent.";
}
leaf num-pcupd-rcvd {
when "../../../pcep:role = 'pce'"
+ "or "
+ "../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of PCUpd messages received.";
}
leaf num-rpt-sent {
when "../../../pcep:role = 'pce'"
+ "or "
+ "../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of LSP Reports sent. A LSP report
corresponds 1:1 with an LSP object in a PCRpt
message. This might be greater than
num-pcrpt-sent because multiple reports can
be batched into a single PCRpt message.";
}
leaf num-rpt-rcvd {
when "../../../pcep:role = 'pcc'"
+ "or "
+ "../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of LSP Reports received. A LSP report
corresponds 1:1 with an LSP object in a PCRpt
message.
This might be greater than num-pcrpt-rcvd because
multiple reports can be batched into a single
PCRpt message.";
}
leaf num-rpt-rcvd-error-sent {
when "../../../pcep:role = 'pcc'"
+ "or "
+ "../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of reports of LSPs received that were
responded by the local PCEP entity by sending a
PCErr message.";
}
leaf num-upd-sent {
when "../../../pcep:role = 'pcc'"
+ "or "
+ "../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of LSP updates sent. A LSP update
corresponds 1:1 with an LSP object in a PCUpd
message. This might be greater than
num-pcupd-sent because multiple updates can
be batched into a single PCUpd message.";
}
leaf num-upd-rcvd {
when "../../../pcep:role = 'pce'"
+ "or "
+ "../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of LSP Updates received. A LSP update
corresponds 1:1 with an LSP object in a PCUpd
message.
This might be greater than num-pcupd-rcvd because
multiple updates can be batched into a single
PCUpd message.";
}
leaf num-upd-rcvd-unknown {
when "../../../pcep:role = 'pce'"
+ "or "
+ "../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of updates to unknown LSPs
received. An update to an unknown LSP is a
update whose LSP object does not contain the
PLSP-ID of any LSP that is currently
present.";
}
leaf num-upd-rcvd-undelegated {
when "../../../pcep:role = 'pce'"
+ "or "
+ "../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of updates to not delegated LSPs
received. An update to an undelegated LSP is a
update whose LSP object does not contain the
PLSP-ID of any LSP that is currently
delegated to current PCEP session.";
}
leaf num-upd-rcvd-error-sent {
when "../../../pcep:role = 'pce'"
+ "or "
+ "../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of updates to LSPs received that were
responded by the local PCEP entity by sending a
PCErr message.";
}
container initiation {
if-feature "pcep:pce-initiated";
description
"PCE-Initiated related statistics";
leaf num-pcinitiate-sent {
when "../../../../pcep:role = 'pcc'"
+ "or "
+ "../../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of PCInitiate messages sent.";
}
leaf num-pcinitiate-rcvd {
when "../../../../pcep:role = 'pce'"
+ "or "
+ "../../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of PCInitiate messages received.";
}
leaf num-initiate-sent {
when "../../../../pcep:role = 'pcc'"
+ "or "
+ "../../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of LSP Initiation sent via PCE.
A LSP initiation corresponds 1:1 with an LSP
object in a PCInitiate message. This might be
greater than num-pcinitiate-sent because
multiple initiations can be batched into a
single PCInitiate message.";
}
leaf num-initiate-rcvd {
when "../../../../pcep:role = 'pce'"
+ "or "
+ "../../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of LSP Initiation received from
PCE. A LSP initiation corresponds 1:1 with
an LSP object in a PCInitiate message. This
might be greater than num-pcinitiate-rcvd
because multiple initiations can be batched
into a single PCInitiate message.";
}
leaf num-initiate-rcvd-error-sent {
when "../../../../pcep:role = 'pce'"
+ "or "
+ "../../../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of initiations of LSPs received
that were responded by the local PCEP entity
by sending a PCErr message.";
}
}
//initiation
}
//stateful
container path-key {
when "../../pcep:role = 'pcc'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
if-feature "pcep:path-key";
description
"If Path-Key is supported";
leaf num-unknown-path-key {
type yang:counter32;
description
"The number of attempts to expand an unknown
path-key.";
}
leaf num-exp-path-key {
type yang:counter32;
description
"The number of attempts to expand an expired
path-key.";
}
leaf num-dup-path-key {
type yang:counter32;
description
"The number of duplicate attempts to expand same
path-key.";
}
leaf num-path-key-no-attempt {
type yang:counter32;
description
"The number of expired path-keys with no attempt to
expand it.";
}
}
//path-key
}
//pcep-stats
/*
* Augment modules to add statistics
*/
augment "/pcep:pcep/pcep:entity/pcep:peers/pcep:peer" {
description
"Augmenting the statistics";
leaf num-sess-setup-ok {
type yang:counter32;
config false;
description
"The number of PCEP sessions successfully established with
the peer, including any current session. This counter is
incremented each time a session with this peer is
successfully established.";
}
leaf num-sess-setup-fail {
type yang:counter32;
config false;
description
"The number of PCEP sessions with the peer
that have been attempted but failed
before being fully established. This
counter is incremented each time a
session retry to this peer fails.";
}
container pcep-stats {
config false;
description
"The container for all statistics at peer level.";
uses pcep-stats {
description
"Since PCEP sessions can be ephemeral, the peer statistics
tracks a peer even when no PCEP session currently exists
to that peer. The statistics contained are an aggregate of
the statistics for all successive sessions to that peer.";
}
leaf num-req-sent-closed {
when "../../pcep:role = 'pce'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCE";
}
type yang:counter32;
description
"The number of requests that were sent to the peer and
implicitly cancelled when the session they were sent
over was closed.";
}
leaf num-req-rcvd-closed {
when "../../pcep:role = 'pcc'"
+ "or "
+ "../../pcep:role = 'pcc-and-pce'" {
description
"Valid for PCEP Peer as PCC";
}
type yang:counter32;
description
"The number of requests that were received from the peer
and implicitly cancelled when the session they were
received over was closed.";
}
}
//pcep-stats
}
//augment
augment "/pcep:pcep/pcep:entity/pcep:peers/pcep:peer/"
+ "pcep:sessions/pcep:session" {
description
"Augmenting the statistics";
container pcep-stats {
description
"The container for all statistics at session level.";
uses pcep-stats {
description
"The statistics contained are for the current sessions to
that peer. These are lost when the session goes down.";
}
}
//pcep-stats
}
//augment
}
]]>
The YANG module defined in this document is designed to be accessed via
network management protocol such as NETCONF
or RESTCONF . The lowest NETCONF layer is the secure
transport layer and the mandatory-to-implement secure transport is
SSH . The lowest RESTCONF layer is HTTPS, and the
mandatory-to-implement secure transport is TLS
The NETCONF access control model provides
the means to restrict access for particular NETCONF or RESTCONF users to a
pre-configured subset of all available NETCONF or RESTCONF protocol
operations and content.
There are a number of data nodes defined in the YANG module which are
writable/creatable/deletable (i.e., config true, which is the
default). These data nodes may be considered sensitive or vulnerable
in some network environments. Write operations (e.g., <edit-config>)
to these data nodes without proper protection can have a negative
effect on network operations. These are the subtrees and data nodes and
their sensitivity/vulnerability:
/pcep/entity/ - configure local parameters, capabilities etc.
/pcep/entity/peers - configure remote peers to setup PCEP session.
Unauthorized access to above list can adversely affect the
PCEP session between the local entity and the peers. This may
lead to inability to compute new paths, stateful operations on
the delegated as well as PCE-initiated LSPs.
Some of the readable data nodes in this YANG module may be considered
sensitive or vulnerable in some network environments. It is thus important
to control read access (e.g., via get, get-config, or notification) to
these data nodes. These are the subtrees and data nodes and their
sensitivity/vulnerability:
/pcep/lsp-db - All the LSPs in the network. Unauthorized access to
this could provide the all path and network usage information.
/pcep/path-keys/ - The Confidential Path Segments (CPS) are hidden
using path-keys. Unauthorized access to this could leak confidential
path information.
Some of the RPC operations in this YANG module may be considered sensitive
or vulnerable in some network environments. It is thus important to control
access to these operations. These are the operations and their
sensitivity/vulnerability:
trigger-resync - trigger resynchronization with the PCE. Unauthorized access to
this could force a PCEP session into continuous state synchronization.
This document registers a URI in the "IETF XML Registry"
.
Following the format in RFC 3688, the following registration has been
made.
urn:ietf:params:xml:ns:yang:ietf-pcep
The PCE WG of the IETF.
N/A; the requested URI is an XML namespace.
This document registers a YANG module in the "YANG Module Names"
registry .
The initial document is based on the PCEP MIB
. We would
like to thank the authors of aforementioned documents.
Thanks to Mahesh Jethmalani for the Yang Doctor review.
Thanks to Martin Bjorklund and Tom Petch for providing guidance regarding the Yang guidelines.
The example below provide an overview of PCEP peer session informations and LSP-DB in the Yang Module.
| |
| | | |
+-------+ | |
IP:192.0.2.1 | |
| PCE |
| |
+-------+ | |
| | | |
| PCC2 |<---------------->| |
| | | |
+-------+ | |
IP:192.0.2.2 | |
| |
| |
+-------+ | |
| | | |
| PCC4 |<---------------->| |
| | | |
+-------+ | |
IP:2001:DB8::4 | |
+-------+
IP:192.0.2.3
2001:DB8::3
at PCE:
{
"entity": [
{
"addr": "192.0.2.3",
"oper-status": "oper-status-up",
"role":"pce",
"capability" : {
"stateful": {
"enabled": true
}
}
"lsp-db" : [
"lsp" : {
"plsp-id": 3,
"pcc-id" :"192.0.2.1",
"lsp-ref" : {
"source": "192.0.2.1",
"destination": "192.0.2.4"
"tunnel-id": 16,
"lsp-id": 3,
"extended-tunnel-id": 0
},
"oper-status": "oper-status-up",
"delegated": true,
"symbolic-path-name": "iewauh",
},
"lsp" : {
"plsp-id": 4,
"pcc-id" :"192.0.2.2",
"lsp-ref" : {
"source": "192.0.2.2",
"destination": "192.0.2.5"
"tunnel-id": 17,
"lsp-id": 4
"extended-tunnel-id": 0
},
"oper-status": "oper-status-up",
"delegated": true,
"symbolic-path-name": "iewauhiewauh",
"extended-tunnel-id": 0
}
]
"peers":[
{
"peer": {
"addr":"192.0.2.1",
"role": "pcc",
"capability": {
"stateful" : {
"enabled": true,
"active": yes,
}
}
"sessions": [
{
"session": {
"initiator": "remote",
"role": "pcc",
}
}
]
}
},
{
"peer": {
"addr":"192.0.2.2",
"role": "pcc",
"capability": {
"stateful" : {
"enabled": true,
"active": true,
}
}
"sessions": [
{
"session": {
"initiator": "remote",
"role": "pcc",
}
}
]
}
}
]
},
{
"addr": "2001:DB8::3",
"oper-status": "oper-status-up",
"role":"pce",
"peers":[
{
"peer": {
"addr":"2001:DB8::4",
"role": "pcc",
"sessions": [
{
"session": {
"initiator": "remote",
"role": "pcc",
}
}
]
}
}
]
}
}
]]>