RIFT J. Head, Ed. Internet-Draft T. Przygienda Intended status: Standards Track Juniper Networks Expires: 26 December 2022 24 June 2022 RIFT Key/Value Structure and Registry draft-ietf-rift-kv-registry-01 Abstract The Routing in Fat-Trees RIFT [RIFT] protocol allows for key/value pairs to be advertised within Key-Value Topology Information Elements (KV-TIEs). The data contained within these KV-TIEs can be used for any imaginable purpose. This document defines the various Key-Types (i.e. Well-Known, OUI, and Experimental) and a method to structure corresponding values. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119]. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 26 December 2022. Copyright Notice Copyright (c) 2022 IETF Trust and the persons identified as the document authors. All rights reserved. Head & Przygienda Expires 26 December 2022 [Page 1] Internet-Draft draft-ietf-rift-kv-registry-01 June 2022 This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Description . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Key Structure . . . . . . . . . . . . . . . . . . . . . . . . 2 2.1. Experimental Key-Type . . . . . . . . . . . . . . . . . . 3 2.2. Well-Known Key-Type . . . . . . . . . . . . . . . . . . . 4 2.3. OUI Key-Type . . . . . . . . . . . . . . . . . . . . . . 4 3. Operational Considerations . . . . . . . . . . . . . . . . . 5 4. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 5 4.1. RIFT Key-Type Registry . . . . . . . . . . . . . . . . . 6 4.1.1. RIFT Key-Type Registry Requested Entries . . . . . . 6 4.2. RIFT Well-Known Key-Type Registry . . . . . . . . . . . . 6 4.2.1. RIFT Well-Known Key-Type Registry Requested Entries . . . . . . . . . . . . . . . . . . . . . . . 7 4.3. Expert Review Guidance . . . . . . . . . . . . . . . . . 7 5. Security Considerations . . . . . . . . . . . . . . . . . . . 8 6. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 8 7. Normative References . . . . . . . . . . . . . . . . . . . . 8 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 8 1. Description The Routing in Fat-Trees RIFT [RIFT] protocol allows for key/value pairs to be advertised within Key-Value Topology Information Elements (KV-TIEs). There are no restrictions placed on the type of data that is contained in KV-TIEs nor what the data is used for. For example, it might be beneficial to advertise overlay protocol state from leaf nodes to the Top-of-Fabric (ToF) nodes. This would make it possible to view critical state of a fabric-wide service from a single ToF node rather than retrieving and reconciling the same state from multiple leaf nodes. 2. Key Structure This section describes the generic Key structure and semantics, Figure 1 further illustrates these components. Head & Przygienda Expires 26 December 2022 [Page 2] Internet-Draft draft-ietf-rift-kv-registry-01 June 2022 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Key-Type | Key Identifier | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Values (variable) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Figure 1: Generic Key-Value Structure *where:* *Key-Type:* A 1-byte value that identifies the Key-Type. It MUST be a reserved value from the RIFT Key-Type Registry that is defined later in this document. The range of valid values is 1 - 255 (2^8-1). 0 is an illegal value and MUST NOT be allocated to or used by any implementation. It MUST be ignored on receipt. *Key Identifier:* A 3-byte value that identifies the specific key and describes the structure of the contained values. The range of valid values is 1 - 16777215 (2^24-1). 0 is an illegal value and MUST NOT be allocated to or used by any implementation. It MUST be ignored on receipt. *Values:* A variable length value that contains data associated with the Key Identifier. It SHOULD contain 1 or more elements. Whether the collection of elements allows duplicates and/or is ordered is governed by the particular Key Identifier's specification. 2.1. Experimental Key-Type This section reserves a value in the RIFT Key-Type Registry to indicate an Experimental Key-Type. As shown in Figure 2, the Key-Type will be used to identify the Key- Type as Experimental. The Key Identifier will be used to identify the specific key and describe the structure of the contained values. Head & Przygienda Expires 26 December 2022 [Page 3] Internet-Draft draft-ietf-rift-kv-registry-01 June 2022 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 1 | Experimental Key Identifier | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Experimental Values (variable) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Figure 2: Experimental Key-Type 2.2. Well-Known Key-Type This section reserves a value in the RIFT Key-Type Registry to indicate Well-Known Key-Types that all implementations SHOULD support. As shown in Figure 3, the Key-Type will be used to identify the Key- Type as Well-Known. The Key Identifier will be used to identify the specific key and describe the structure of the contained values. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 2 | Well-Known Key Identifier | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Well-Known Values (variable) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Figure 3: Well-Known Key-Type 2.3. OUI Key-Type This section reserves a value in the RIFT Key-Type Registry to indicate an OUI (vendor-specific) Key-Type that any implementation MAY support. As shown in Figure 4, the Key-Type will be used to identify the Key- Type as OUI. The Key Identifier MUST use the implementing organization's reserved OUI space to indicate the key and value structure. Head & Przygienda Expires 26 December 2022 [Page 4] Internet-Draft draft-ietf-rift-kv-registry-01 June 2022 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 3 | OUI Key Identifier | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Vendor Specific Values (variable) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Figure 4: OUI Key-Type 3. Operational Considerations While no restrictions are placed on Key-Value data or what it is used for, it is RECOMMENDED that a serialized Thrift model be used for simpler interoperability. [RIFT-AUTO-EVPN] is an example of this type of implementation. Key-Value elements SHOULD NOT be used to carry topology information used by RIFT itself to perform distributed computations. In cases where KV-TIEs are flooded from north to south, policies SHOULD be implemented in order to avoid network-wide flooding. For networks with more than one ToF node, it is RECOMMENDED that those ToF nodes contain identical KV-TIE information when being distributed from north to south. RIFT [RIFT] requires that only one KV-TIE is selected when identical keys are received from multiple northbound neighbors. If this is not considered then the tie- breaking rules may cause a node to select a suboptimal KV-TIE. Consider a case where failure conditions cause the ToF nodes to become split-brained. While the Key-Type and Key Identifier will be identical, the value(s) contained within may differ. The node(s) receiving these differing KV-TIEs will select the one from the ToF node with the highest System ID, potentially leading to unintended effects. 4. IANA Considerations This section requests that IANA create two new registries the "RIFT Key-Type" and "RIFT Well-Known Key-Type" registries in accordance with [RFC8126]. Experts reviewing requests for new values to either registry MUST consider the items in the Expert Review Guidance (Section 4.3) section. Head & Przygienda Expires 26 December 2022 [Page 5] Internet-Draft draft-ietf-rift-kv-registry-01 June 2022 The following sections detail each registry's requirements and suggested values. 4.1. RIFT Key-Type Registry This section requests that IANA create and help govern the following registry: *Registry Name:* RIFT Key-Type Registry *Registration Procedures:* Expert Review *Description:* Key-Type registry for the RIFT protocol. *Reference:* This document. 4.1.1. RIFT Key-Type Registry Requested Entries This section requests that IANA register the following suggested values to the "RIFT Key-Type Registry". +=======+==============+=============================+===========+ | Value | Key-Type | Description | Status/ | | | | | Reference | +=======+==============+=============================+===========+ | 0 | Illegal | Not allowed. | This | | | | | document | +-------+--------------+-----------------------------+-----------+ | 1 | Experimental | Indicates that the Key-Type | This | | | | is Experimental. | document. | +-------+--------------+-----------------------------+-----------+ | 2 | Well-Known | Indicates that the Key-Type | This | | | | is Well-Known. | document. | +-------+--------------+-----------------------------+-----------+ | 3 | OUI | Indicates that the Key-Type | This | | | | is OUI (vendor specific). | document. | +-------+--------------+-----------------------------+-----------+ Table 1 4.2. RIFT Well-Known Key-Type Registry This section requests that IANA create and help govern the following registry: Head & Przygienda Expires 26 December 2022 [Page 6] Internet-Draft draft-ietf-rift-kv-registry-01 June 2022 *Registry Name:* RIFT Well-Known Key-Type Registry *Registration Procedures:* Expert Review *Description:* Well-Known Key-Type (2) registry for the RIFT protocol. *Reference:* This document. 4.2.1. RIFT Well-Known Key-Type Registry Requested Entries This section requests that IANA register the following suggested values to the "RIFT Well-Known Key-Type Registry". +=======+================+================+==================+ | Value | Key-Identifier | Description | Status/Reference | +=======+================+================+==================+ | 0 | Illegal | Not allowed. | This document. | +-------+----------------+----------------+------------------+ | 1 | MAC/IP Binding | To be defined. | To be defined. | +-------+----------------+----------------+------------------+ | 2 | FAM Security | To be defined. | To be defined. | | | Roll-Over Key | | | +-------+----------------+----------------+------------------+ Table 2 4.3. Expert Review Guidance Experts reviewing requests for values from the RIFT Key-Type Registry or the the the Well-Known RIFT Key-Type Registry are responsible for the following: 1. Determining the existence of a specification that clearly defines the purpose supporting the request and MUST contain all required fields for given registry. The document MUST also be permenent and publically available. 2. Ensuring that any requests are made available to the RIFT working group for review should the work originate from outside of the RIFT Working Group. Head & Przygienda Expires 26 December 2022 [Page 7] Internet-Draft draft-ietf-rift-kv-registry-01 June 2022 3. Ensuring that any work produce outside of the IETF does not conflict with any work that is already published or actively pursuing being published. 5. Security Considerations This document introduces no new security concerns to RIFT or other specifications referenced in this document given that the Key-Value TIEs are already extensively secured by the RIFT [RIFT] protocol specification itself. 6. Acknowledgements To be provided. 7. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC8126] Cotton, M., Leiba, B., and T. Narten, "Guidelines for Writing an IANA Considerations Section in RFCs", June 2017, . [RIFT] Przygienda, T., Sharma, A., Thubert, P., Rijsman, B., and D. Afanasiev, "RIFT: Routing in Fat Trees", Work in Progress, draft-ietf-rift-rift-15, July 2021. [RIFT-AUTO-EVPN] Head, J., Przygienda, T., and W. Lin, "RIFT Auto-EVPN", Work in Progress, draft-head-rift-auto-evpn-02, March 2022. Authors' Addresses Jordan Head (editor) Juniper Networks 1137 Innovation Way Sunnyvale, CA United States of America Email: jhead@juniper.net Head & Przygienda Expires 26 December 2022 [Page 8] Internet-Draft draft-ietf-rift-kv-registry-01 June 2022 Tony Przygienda Juniper Networks 1137 Innovation Way Sunnyvale, CA United States of America Email: prz@juniper.net Head & Przygienda Expires 26 December 2022 [Page 9]