Network Working Group P. Hunt, Ed. Internet-Draft Oracle Intended status: Standards Track K. Grizzle Expires: November 14, 2014 SailPoint M. Ansari Cisco E. Wahlstroem Technology Nexus C. Mortimore Salesforce May 13, 2014 System for Cross-Domain Identity Management:Protocol draft-ietf-scim-api-05 Abstract The System for Cross-Domain Identity Management (SCIM) specification is designed to make managing user identity in cloud based applications and services easier. The specification suite seeks to build upon experience with existing schemas and deployments, placing specific emphasis on simplicity of development and integration, while applying existing authentication, authorization, and privacy models. It's intent is to reduce the cost and complexity of user management operations by providing a common user schema and extension model, as well as binding documents to provide patterns for exchanging this schema using standard protocols. In essence, make it fast, cheap, and easy to move users in to, out of, and around the cloud. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on November 14, 2014. Hunt, et al. Expires November 14, 2014 [Page 1] Internet-Draft draft-ietf-scim-api-05 May 2014 Copyright Notice Copyright (c) 2014 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction and Overview . . . . . . . . . . . . . . . . . . 3 1.1. Intended Audience . . . . . . . . . . . . . . . . . . . . 3 1.2. Notational Conventions . . . . . . . . . . . . . . . . . 3 1.3. Definitions . . . . . . . . . . . . . . . . . . . . . . . 3 2. Authentication and Authorization . . . . . . . . . . . . . . 4 3. API . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3.1. Creating Resources . . . . . . . . . . . . . . . . . . . 7 3.1.1. Resource Types . . . . . . . . . . . . . . . . . . . 8 3.2. Retrieving Resources . . . . . . . . . . . . . . . . . . 8 3.2.1. Retrieving a known Resource . . . . . . . . . . . . . 8 3.2.2. List/Query Resources . . . . . . . . . . . . . . . . 10 3.2.3. Querying Resources Using HTTP POST . . . . . . . . . 20 3.3. Modifying Resources . . . . . . . . . . . . . . . . . . . 22 3.3.1. Modifying with PUT . . . . . . . . . . . . . . . . . 23 3.3.2. Modifying with PATCH . . . . . . . . . . . . . . . . 25 3.4. Deleting Resources . . . . . . . . . . . . . . . . . . . 34 3.5. Bulk . . . . . . . . . . . . . . . . . . . . . . . . . . 35 3.6. Data Input/Output Formats . . . . . . . . . . . . . . . . 50 3.7. Additional Operation Response Parameters . . . . . . . . 51 3.8. Attribute Notation . . . . . . . . . . . . . . . . . . . 52 3.9. "/Me" Authenticated Subject Alias . . . . . . . . . . . . 53 3.10. HTTP Response Codes . . . . . . . . . . . . . . . . . . . 53 3.11. API Versioning . . . . . . . . . . . . . . . . . . . . . 55 3.12. Versioning Resources . . . . . . . . . . . . . . . . . . 55 4. Multi-Tenancy . . . . . . . . . . . . . . . . . . . . . . . . 57 4.1. Associating Clients to Tenants . . . . . . . . . . . . . 58 4.2. SCIM Identifiers with Multiple Tenants . . . . . . . . . 58 5. Security Considerations . . . . . . . . . . . . . . . . . . . 59 5.1. TLS Support . . . . . . . . . . . . . . . . . . . . . . . 59 5.2. Querying Using HTTP GET . . . . . . . . . . . . . . . . . 59 5.3. Universal Identifiers . . . . . . . . . . . . . . . . . . 60 Hunt, et al. Expires November 14, 2014 [Page 2] Internet-Draft draft-ietf-scim-api-05 May 2014 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 60 6.1. Media Type Registration . . . . . . . . . . . . . . . . . 60 7. References . . . . . . . . . . . . . . . . . . . . . . . . . 61 7.1. Normative References . . . . . . . . . . . . . . . . . . 61 7.2. Informative References . . . . . . . . . . . . . . . . . 62 Appendix A. Contributors . . . . . . . . . . . . . . . . . . . . 62 Appendix B. Acknowledgments . . . . . . . . . . . . . . . . . . 62 Appendix C. Change Log . . . . . . . . . . . . . . . . . . . . . 63 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 64 1. Introduction and Overview The SCIM Protocol is an application-level, HTTP protocol for provisioning and managing identity data on the web. The protocol supports creation, modification, retrieval, and discovery of core identity resources; i.e., Users and Groups, as well as custom resource extensions. 1.1. Intended Audience This document is intended as a guide to SCIM API usage for both identity service providers and clients. 1.2. Notational Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. These keywords are capitalized when used to unambiguously specify requirements of the protocol or application features and behavior that affect the interoperability and security of implementations. When these words are not capitalized, they are meant in their natural-language sense. For purposes of readability examples are not URL encoded. Implementers MUST percent encode URLs as described in Section 2.1 [RFC3986]. 1.3. Definitions Base URL: The SCIM HTTP API is always relative to a Base URL. The Base URL MUST NOT contain a query string as clients may append additional path information and query parameters as part of forming the request. Example: "https://example.com/scim/" For readability, all examples in this document are expressed assuming the SCIM service root and the server root are the same. It is expected that SCIM servers may be deployed using any URI Hunt, et al. Expires November 14, 2014 [Page 3] Internet-Draft draft-ietf-scim-api-05 May 2014 prefix. For example, a SCIM server might be have a prefix of "https://example.com/", or "https://example.com/scim/tenancypath/ ". Additionally client may also apply a version number to the server root prefix (see Section 3.11). 2. Authentication and Authorization The SCIM protocol does not define a scheme for authentication and authorization therefore implementers are free to choose mechanisms appropriate to their use cases. The choice of authentication mechanism will impact interoperability. It is RECOMMENDED that clients be implemented in such a way that new authentication schemes can be deployed. Implementers SHOULD support existing authentication /authorization schemes. In particular, OAuth2[RFC6750] is RECOMMENDED. Appropriate security considerations of the selected authentication and authorization schemes SHOULD be taken. Because this protocol uses HTTP response status codes as the primary means of reporting the result of a request, servers are advised to respond to unauthorized or unauthenticated requests using the 401 response code in accordance with section 10.4.2 of Section 10.4.2 [RFC2616]. All examples assume OAuth2 bearer token [RFC6750]; e.g., GET /Users/2819c223-7f76-453a-919d-413861904646 HTTP/1.1 Host: example.com Authorization: Bearer h480djs93hd8 The context of the request (i.e. the user for whom data is being requested) MUST be inferred by service providers. 3. API The SCIM protocol specifies well known endpoints and HTTP methods for managing resources defined in the core schema; i.e., "User" and "Group" resources correspond to "/Users" and "/Groups" respectively. Service providers that support extended resources SHOULD define resource endpoints using the established convention; pluralize the resource name defined in the extended schema by appending an 's'. Given there are cases where resource pluralization is ambiguous; e.g., a resource named "Person" is legitimately "Persons" and "People" clients SHOULD discover resource endpoints via the "/ ResourceTypes" endpoint . GET Retrieves a complete or partial resource. POST Create new resource, perform an extended Search, or bulk modify resources. Hunt, et al. Expires November 14, 2014 [Page 4] Internet-Draft draft-ietf-scim-api-05 May 2014 PUT Modifies a resource with a complete, client specified resource (replace). PATCH Modifies a resource with a set of client specified changes (partial update). DELETE Deletes a resource. Hunt, et al. Expires November 14, 2014 [Page 5] Internet-Draft draft-ietf-scim-api-05 May 2014 +------------+--------------------+---------------+-----------------+ | Resource | Endpoint | Operations | Description | +------------+--------------------+---------------+-----------------+ | User | /Users | GET (Section | Retrieve/Add/Mo | | | | 3.2.1), POST | dify Users | | | | (Section | | | | | 3.1), PUT | | | | | (Section | | | | | 3.3.1), PATCH | | | | | (Section | | | | | 3.3.2), | | | | | DELETE | | | | | (Section 3.4) | | | Group | /Groups | GET (Section | Retrieve/Add/Mo | | | | 3.2.1), POST | dify Groups | | | | (Section | | | | | 3.1), PUT | | | | | (Section | | | | | 3.3.1), PATCH | | | | | (Section | | | | | 3.3.2), | | | | | DELETE | | | | | (Section 3.4) | | | Service | /ServiceProviderCo | GET (Section | Retrieve the | | Provider C | nfigs | 3.2.1) | service | | onfigurati | | | provider's | | on | | | configuration | | Resource | /ResourceTypes | GET (Section | Retrieve the | | Type | | 3.2.1) | supported | | | | | resource types | | Schema | /Schemas | GET (Section | Retrieve a | | | | 3.2.1) | resource's | | | | | schema | | Bulk | /Bulk | POST (Section | Bulk modify | | | | 3.5) | resources | | Search | [prefix]/.search | POST (Section | Perform a | | | | 3.2.3) | search at | | | | | system root or | | | | | within a | | | | | resource | | | | | endpoint for | | | | | one or more | | | | | resource types | | | | | using POST. | +------------+--------------------+---------------+-----------------+ Table 1: Defined endpoints Hunt, et al. Expires November 14, 2014 [Page 6] Internet-Draft draft-ietf-scim-api-05 May 2014 All requests to the service provider are made via Section 9 [RFC2616] on a URL derived from the Base URL. Responses are returned in the body of the HTTP response, formatted as JSON. Response and error codes SHOULD be transmitted via the HTTP status code of the response (if possible), and SHOULD also be specified in the body of the response. 3.1. Creating Resources To create new resources, clients send POST requests to the resource endpoint; i.e., "/Users" or "/Groups". Successful resource creation is indicated with a 201 ("Created") response code. Upon successful creation, the response body MUST contain the newly created resource. Since the server is free to alter and/or ignore POSTed content, returning the full representation can be useful to the client, enabling it to correlate the client and server views of the new resource. When a resource is created, its URI must be returned in the response Location header. If the service provider determines creation of the requested resource conflicts with existing resources; e.g., a "User" resource with a duplicate "userName", the service provider MUST return a 409 error and SHOULD indicate the conflicting attribute(s) in the body of the response. Below, the client sends a POST request containing a user POST /Users HTTP/1.1 Host: example.com Accept: application/json Content-Type: application/json Authorization: Bearer h480djs93hd8 Content-Length: ... { "schemas":["urn:scim:schemas:core:2.0:User"], "userName":"bjensen", "externalId":"bjensen", "name":{ "formatted":"Ms. Barbara J Jensen III", "familyName":"Jensen", "givenName":"Barbara" } } Hunt, et al. Expires November 14, 2014 [Page 7] Internet-Draft draft-ietf-scim-api-05 May 2014 The server signals a successful creation with a status code of 201. The response includes a Location header indicating the User URI, and a representation of that user in the body of the response. HTTP/1.1 201 Created Content-Type: application/json Location: https://example.com/v2/Users/2819c223-7f76-453a-919d-413861904646 ETag: W/"e180ee84f0671b1" { "schemas":["urn:scim:schemas:core:2.0:User"], "id":"2819c223-7f76-453a-919d-413861904646", "externalId":"bjensen", "meta":{ "resourceType":"User", "created":"2011-08-01T21:32:44.882Z", "lastModified":"2011-08-01T21:32:44.882Z", "location":"https://example.com/v2/Users/2819c223-7f76-453a-919d-413861904646", "version":"W\/\"e180ee84f0671b1\"" }, "name":{ "formatted":"Ms. Barbara J Jensen III", "familyName":"Jensen", "givenName":"Barbara" }, "userName":"bjensen" } 3.1.1. Resource Types When adding a resource to a specific endpoint, the meta attribute "resourceType" SHALL be set by the service provider to the corresponding resource Type for the endpoint. For example, "/Users" will set "resourceType" to "User", and "/Groups" will set "resourceType" to "Group". 3.2. Retrieving Resources "User" and "Group" resources are retrieved via opaque, unique URLs or via Query. Service providers MAY choose to respond with a sub-set of resource attributes, though MUST minimally return the resource id and meta attributes. 3.2.1. Retrieving a known Resource To retrieve a known resource, clients send GET requests to the resource endpoint; e.g., "/Users/{id}" or "/Groups/{id}". Hunt, et al. Expires November 14, 2014 [Page 8] Internet-Draft draft-ietf-scim-api-05 May 2014 If the resource exists the server responds with a status code of 200 and includes the result in the body of the response. The below example retrieves a single User via the "/Users" endpoint. GET /Users/2819c223-7f76-453a-919d-413861904646 Host: example.com Accept: application/json Authorization: Bearer h480djs93hd8 The server responds with: HTTP/1.1 200 OK Content-Type: application/json Location: https://example.com/v2/Users/2819c223-7f76-453a-919d-413861904646 ETag: W/"f250dd84f0671c3" { "schemas":["urn:scim:schemas:core:2.0:User"], "id":"2819c223-7f76-453a-919d-413861904646", "externalId":"bjensen", "meta":{ "resourceType":"User", "created":"2011-08-01T18:29:49.793Z", "lastModified":"2011-08-01T18:29:49.793Z", "location":"https://example.com/v2/Users/2819c223-7f76-453a-919d-413861904646", "version":"W\/\"f250dd84f0671c3\"" }, "name":{ "formatted":"Ms. Barbara J Jensen III", "familyName":"Jensen", "givenName":"Barbara" }, "userName":"bjensen", "phoneNumbers":[ { "value":"555-555-8377", "type":"work" } ], "emails":[ { "value":"bjensen@example.com", "type":"work" } ] } Hunt, et al. Expires November 14, 2014 [Page 9] Internet-Draft draft-ietf-scim-api-05 May 2014 3.2.2. List/Query Resources SCIM defines a standard set of operations that can be used to filter, sort, and paginate response results. The operations are specified by adding query parameters to the resource's endpoint. Service providers MAY support additional query parameters not specified here, and Providers SHOULD ignore any query parameters they don't recognize. List and query responses MUST be identified using the following URI: "urn:scim:schemas:core:2.0:ListResponse". The following attributes are defined for list and query responses: totalResults The total number of results returned by the list or query operation. This may not be equal to the number of elements in the resources attribute of the list response if pagination (Section 3.2.2.4) is requested. REQUIRED. Resources A multi-valued list of complex objects containing the requested resources. This may be a subset of the full set of resources if pagination (Section 3.2.2.4) is requested. REQUIRED. startIndex The 1-based index of the first result in the current set of list results. REQUIRED if pagination (Section 3.2.2.4) is requested. itemsPerPage The number of resources returned in a list response page. REQUIRED if pagination (Section 3.2.2.4) is requested. The query example below requests the userName for all Users: GET /Users?attributes=userName Host: example.com Accept: application/json Authorization: Bearer h480djs93hd8 Hunt, et al. Expires November 14, 2014 [Page 10] Internet-Draft draft-ietf-scim-api-05 May 2014 The following is an example response to the query above: HTTP/1.1 200 OK Content-Type: application/json { "schemas":["urn:scim:schemas:core:2.0:ListResponse"], "totalResults":2, "Resources":[ { "userName":"bjensen" }, { "userName":"jsmith" } ] } 3.2.2.1. Query Endpoints Queries MAY be performed against a SCIM resource object or a resource type endpoint. For example: "/Users/{userid}" "/Users" "/Groups" A server MAY support searches against the server root (e.g. "/"). A search against a server root indicates that ALL resources within the server SHALL be included subject to filtering. A filter expression using "meta.resourceType" MAY be used to restrict results to one or more specific resource types (e.g. "User"). When processing search operations across endpoints that include more than one SCIM resource type (e.g. a search from the server root endpoint), filters MUST be processed in the same fashion as outlined in Section 3.2.2.2. For filtered attributes that are not part of a particular resource type, the service provider SHALL treat the attribute as if there is no attribute value. For example, a presence or equality filter for an undefined attribute evaluates as FALSE. 3.2.2.2. Filtering Filtering is OPTIONAL. Clients may request a subset of resources by specifying the 'filter' URL query parameter containing a filter expression. When specified only those resources matching the filter Hunt, et al. Expires November 14, 2014 [Page 11] Internet-Draft draft-ietf-scim-api-05 May 2014 expression SHALL be returned. The expression language that is used in the filter parameter supports references to attributes and literals. The attribute name and attribute operator are case insensitive. For example, the following two expressions will evaluate to the same logical value: filter=userName Eq "john" filter=Username eq "john" The filter parameter MUST contain at least one valid Boolean expression. Each expression MUST contain an attribute name followed by an attribute operator and optional value. Multiple expressions MAY be combined using the two logical operators. Furthermore expressions can be grouped together using "()". The operators supported in the expression are listed in the following table. +----------+-------------+------------------------------------------+ | Operator | Description | Behavior | +----------+-------------+------------------------------------------+ | eq | equal | The attribute and operator values must | | | | be identical for a match. | | ne | not equal | The attribute and operator values are | | | | not identical. | | co | contains | The entire operator value must be a | | | | substring of the attribute value for a | | | | match. | | sw | starts with | The entire operator value must be a | | | | substring of the attribute value, | | | | starting at the beginning of the | | | | attribute value. This criterion is | | | | satisfied if the two strings are | | | | identical. | | ew | ends with | The entire operator value must be a | | | | substring of the attribute value, | | | | matching at the end of the attribute | | | | value. This criterion is satisfied if | | | | the two strings are identical. | | pr | present | If the attribute has a non-empty value, | | | (has value) | or if it contains a non-empty node for | | | | complex attributes there is a match. | | gt | greater | If the attribute value is greater than | | | than | operator value, there is a match. The | | | | actual comparison is dependent on the | Hunt, et al. Expires November 14, 2014 [Page 12] Internet-Draft draft-ietf-scim-api-05 May 2014 | | | attribute type. For string attribute | | | | types, this is a lexicographical | | | | comparison and for DateTime types, it is | | | | a chronological comparison. | | ge | greater | If the attribute value is greater than | | | than or | or equal to the operator value, there is | | | equal | a match. The actual comparison is | | | | dependent on the attribute type. For | | | | string attribute types, this is a | | | | lexicographical comparison and for | | | | DateTime types, it is a chronological | | | | comparison. | | lt | less than | If the attribute value is less than | | | | operator value, there is a match. The | | | | actual comparison is dependent on the | | | | attribute type. For string attribute | | | | types, this is a lexicographical | | | | comparison and for DateTime types, it is | | | | a chronological comparison. | | le | less than | If the attribute value is less than or | | | or equal | equal to the operator value, there is a | | | | match. The actual comparison is | | | | dependent on the attribute type. For | | | | string attribute types, this is a | | | | lexicographical comparison and for | | | | DateTime types, it is a chronological | | | | comparison. | +----------+-------------+------------------------------------------+ Table 2: Attribute Operators +----------+-------------+------------------------------------------+ | Operator | Description | Behavior | +----------+-------------+------------------------------------------+ | and | Logical And | The filter is only a match if both | | | | expressions evaluate to true. | | or | Logical or | The filter is a match if either | | | | expression evaluates to true. | | not | Not | The filter is a match if the expression | | | function | evaluates to false. | +----------+-------------+------------------------------------------+ Table 3: Logical Operators Hunt, et al. Expires November 14, 2014 [Page 13] Internet-Draft draft-ietf-scim-api-05 May 2014 +----------+-------------+------------------------------------------+ | Operator | Description | Behavior | +----------+-------------+------------------------------------------+ | ( ) | Precedence | Boolean expressions may be grouped using | | | grouping | parentheses to change the standard order | | | | of operations; i.e., evaluate OR logical | | | | operators before logical AND operators. | | [ ] | Complex | Service providers MAY support complex | | | attribute | filters where expressions MUST be | | | filter | applied to the same value of a parent | | | grouping | attribute specified immediately before | | | | the left square bracket ("["). The | | | | expression within square brackets ("[" | | | | and "]") MUST be a valid filter | | | | expression based upon sub-attributes of | | | | the parent attribute. Nested expressions | | | | MAY be used. See examples below. | +----------+-------------+------------------------------------------+ Table 4: Grouping Operators Hunt, et al. Expires November 14, 2014 [Page 14] Internet-Draft draft-ietf-scim-api-05 May 2014 SCIM filters MUST conform to the following ABNF rules as per [RFC5234] below: FILTER = attrExp / logExp / valuePath / *1"not" "(" FILTER ")" valuePath = attrPath "[" FILTER "]" ; FILTER uses sub-attribs of a parent attrPath ATTRNAME = ALPHA *(nameChar) nameChar = "-" / "_" / DIGIT / ALPHA attrPath = [URI ":"] ATTRNAME *1subAttr ; SCIM attribute name ; URI is SCIM "schema" URI subAttr = "." ATTRNAME ; a sub-attribute of a complex attribute attrExpr = (attrPath SP "pr") / (attrPath SP compareOp SP compValue) compValue = false / null / true / number / string ; rules from JSON (RFC7159) compareOp = "eq" / "ne" / "co" / "sw" / "ew" / "gt" / "lt" / "ge" / "le" logExp = FILTER ("and" / "or") FILTER Figure 1: ABNF Specification of SCIM Filters In the above ABNF, the "compValue" (comparison value) rule is built on JSON Data Interchange format ABNF rules as specified in [RFC7159], "DIGIT" and "ALPHA" are defined per Appendix B.1 of [RFC5234] and, "URI" is defined per Appendix A of [RFC3986]. Filters MUST be evaluated using standard order of operations [Order-Operations]. Attribute operators have the highest precedence, followed by the grouping operator (i.e, parentheses), followed by the logical AND operator, followed by the logical OR operator. If the specified attribute in a filter expression is a multi-valued attribute, the resource MUST match if any of the instances of the given attribute match the specified criterion; e.g. if a User has multiple emails values, only one has to match for the entire User to Hunt, et al. Expires November 14, 2014 [Page 15] Internet-Draft draft-ietf-scim-api-05 May 2014 match. For complex attributes, a fully qualified Sub-Attribute MUST be specified using standard attribute notation (Section 3.8). For example, to filter by userName the parameter value is userName and to filter by first name, the parameter value is name.givenName. Providers MAY support additional filter operations if they choose. Providers MUST decline to filter results if the specified filter operation is not recognized and return a HTTP 400 error with an appropriate human readable response. For example, if a client specified an unsupported operator named 'regex' the service provider should specify an error response description identifying the client error; e.g., 'The operator 'regex' is not supported.' String type attributes are case insensitive by default unless the attribute type is defined as case exact. Attribute comparison operators 'eq', 'co', and 'sw' MUST perform caseIgnore matching for all string attributes unless the attribute is defined as case exact. By default all string attributes are case insensitive. Clients MAY search by schema or schema extensions by using a filter expression including the "schemas" attribute. Hunt, et al. Expires November 14, 2014 [Page 16] Internet-Draft draft-ietf-scim-api-05 May 2014 The following are examples of valid filters. Some attributes (e.g. rooms and rooms.number) are hypothetical extensions and are not part of SCIM core schema: filter=userName eq "bjensen" filter=name.familyName co "O'Malley" filter=userName sw "J" filter=title pr filter=meta.lastModified gt "2011-05-13T04:42:34Z" filter=meta.lastModified ge "2011-05-13T04:42:34Z" filter=meta.lastModified lt "2011-05-13T04:42:34Z" filter=meta.lastModified le "2011-05-13T04:42:34Z" filter=title pr and userType eq "Employee" filter=title pr or userType eq "Intern" filter=schemas eq "urn:scim:schemas:extension:enterprise:2.0:User" filter=userType eq "Employee" and (emails co "example.com" or emails co "example.org") filter=userType ne "Employee" and not (emails co "example.com" or emails co "example.org") filter=userType eq "Employee" and (emails.type eq "work") filter=userType eq "Employee" and emails[type eq "work" and value co "@example.com"] filter=emails[type eq "work" and value co "@example.com"] or ims[type eq "xmpp" and value co "@foo.com"] filter=addresses[state eq "CA" and rooms[type eq "bedroom" and number gt 2]] Example Filters Hunt, et al. Expires November 14, 2014 [Page 17] Internet-Draft draft-ietf-scim-api-05 May 2014 3.2.2.3. Sorting Sort is OPTIONAL. Sorting allows clients to specify the order in which resources are returned by specifying a combination of sortBy and sortOrder URL parameters. sortBy: The sortBy parameter specifies the attribute whose value SHALL be used to order the returned responses. If the sortBy attribute corresponds to a singular attribute, resources are sorted according to that attribute's value; if it's a multi-valued attribute, resources are sorted by the value of the primary attribute, if any, or else the first value in the list, if any. If the attribute is complex the attribute name must be a path to a sub-attribute in standard attribute notation (Section 3.8) ; e.g., "sortBy=name.givenName". For all attribute types, if there is no data for the specified "sortBy" value they are sorted via the "sortOrder" parameter; i.e., they are ordered last if ascending and first if descending. sortOrder: The order in which the sortBy parameter is applied. Allowed values are "ascending" and "descending". If a value for sortBy is provided and no sortOrder is specified, the sortOrder SHALL default to ascending. String type attributes are case insensitive by default unless the attribute type is defined as a case exact string. "sortOrder" MUST sort according to the attribute type; i.e., for caee insensitive attributes, sort the result using case insensitive, unicode alphabetic sort order, with no specific locale implied and for case exact attribute types, sort the result using case sensitive, Unicode alphabetic sort order. 3.2.2.4. Pagination Pagination parameters can be used together to "page through" large numbers of resources so as not to overwhelm the client or service provider. Pagination is not session based hence clients SHOULD never assume repeatable results. For example, a request for a list of 10 resources beginning with a startIndex of 1 may return different results when repeated as a resource in the original result could be deleted or new ones could be added in-between requests. Pagination parameters and general behavior are derived from the OpenSearch Protocol [OpenSearch]. The following table describes the URL pagination parameters. Hunt, et al. Expires November 14, 2014 [Page 18] Internet-Draft draft-ietf-scim-api-05 May 2014 +------------+-------------------+----------------------------------+ | Parameter | Description | Default | +------------+-------------------+----------------------------------+ | startIndex | The 1-based index | 1 | | | of the first | | | | search result. | | | count | Non-negative | None. When specified the service | | | Integer. | provider MUST not return more | | | Specifies the | results than specified though | | | desired maximum | MAY return fewer results. If | | | number of search | unspecified, the maximum number | | | results per page; | of results is set by the service | | | e.g., 10. | provider. | +------------+-------------------+----------------------------------+ Table 5: Pagination Request parameters The following table describes the query response pagination attributes specified by the service provider. +--------------+----------------------------------------------------+ | Element | Description | +--------------+----------------------------------------------------+ | itemsPerPage | Non-negative Integer. Specifies the number of | | | search results returned in a query response page; | | | e.g., 10. | | totalResults | Non-negative Integer. Specifies the total number | | | of results matching the client query; e.g., 1000. | | startIndex | The 1-based index of the first result in the | | | current set of search results; e.g., 1. | +--------------+----------------------------------------------------+ Table 6: Pagination Response Elements For example, to retrieve the first 10 Users set the startIndex to 1 and the count to 10: GET /Users?startIndex=1&count=10 Host: example.com Accept: application/json Authorization: Bearer h480djs93hd8 Hunt, et al. Expires November 14, 2014 [Page 19] Internet-Draft draft-ietf-scim-api-05 May 2014 The response to the query above returns metadata regarding paging similar to the following example (actual resources removed for brevity): { "totalResults":100, "itemsPerPage":10, "startIndex":1, "schemas":["urn:scim:schemas:core:2.0"], "Resources":[{ ... }] } Given the example above, to continue paging set the startIndex to 11 and re-fetch; i.e., /Users?startIndex=11&count=10 3.2.3. Querying Resources Using HTTP POST Clients MAY execute queries without passing parameters on the URL by using the HTTP POST verb combined with the '/.search' path extension. The inclusion of '/.search' on the end of a valid SCIM endpoint SHALL be used to indicate the HTTP POST verb is intended to be a query operation. To create a new search result set, a SCIM client sends an HTTP POST request to the desired SCIM resource endpoint (ending in '/.search'). The body of the POST request MAY include any of the parameters as defined in Section 3.2.2. Search requests MUST be identified using the following URI: 'urn:scim:schemas:core:2.0:SearchRequest'. The following attributes are defined for search requests: attributes A multi-valued list of strings indicating the names of resource attributes to return in the response overriding the set of attributes that would be returned by default. Attribute names MUST be in standard attribute notation (Section 3.8) form. See additional retrieval query parameters (Section 3.7). OPTIONAL. excludedAttributes A multi-valued list of strings indicating the names of resource attributes to be removed from the default set of attributes to return. This parameter SHALL have no effect on attributes whose schema "returned" setting is "always" see Server Schema [I-D.ietf-scim-core-schema]. Attribute names MUST be in standard attribute notation (Section 3.8) form. See additional retrieval query parameters (Section 3.7). OPTIONAL. Hunt, et al. Expires November 14, 2014 [Page 20] Internet-Draft draft-ietf-scim-api-05 May 2014 filter The filter string used to request a subset of resources. The filter string MUST be a valid filter (Section 3.2.2.2) expression. OPTIONAL. sortBy A string indicating the attribute whose value SHALL be used to order the returned responses. The sortBy attribute MUST be in standard attribute notation (Section 3.8) form. See sorting (Section 3.2.2.3). OPTIONAL. sortOrder A string indicating the order in which the sortBy parameter is applied. Allowed values are "ascending" and "descending". See sorting (Section 3.2.2.3). OPTIONAL. startIndex An integer indicating the 1-based index of the first search result. See pagination (Section 3.2.2.4). OPTIONAL. count An integer indicating the desired maximum number of search results per page. See pagination (Section 3.2.2.4). OPTIONAL. After receiving a HTTP POST request, a response is returned as specified in Section 3.2.2. The following example shows an HTTP POST Search request with search parameters attributes, filter, and count included: POST /.search Host: example.com Accept: application/json Content-Type: application/json Authorization: Bearer h480djs93hd8 Content-Length: ... { "schemas": ["urn:scim:schemas:core:2.0:SearchRequest"], "attributes": ["displayName", "userName"], "filter": "displayName sw \"smith\"", "startIndex": 1, "count": 10 } Figure 2: Example POST Search Request Hunt, et al. Expires November 14, 2014 [Page 21] Internet-Draft draft-ietf-scim-api-05 May 2014 A search response is shown with the first page of results. For brevity reasons, only two matches are shown: one User and one Group. HTTP/1.1 200 OK Content-Type: application/json Location: https://example.com/.search { "schemas": ["urn:scim:schemas:core:2.0:ListResponse"], "totalResults":100, "itemsPerPage":10, "startIndex":1, "Resources":[ { "meta":{ "location": "https://example.com/Users/2819c223-7f76-413861904646", "resourceType":"User", "lastModified": ... }, "userName":"jsmith", "displayName":"Smith, James" }, { "meta":{ "location": "https://example.com/Groups/c8596b90-7539-4f20968d1908", "resourceType":"Group", "lastModified": ... }, "displayName":"Smith Family" }, ... ] } Figure 3: Example POST Search Response 3.3. Modifying Resources Resources can be modified in whole or in part via PUT or PATCH, respectively. Implementers MUST support PUT as specified in Section 9.6 [RFC2616] . Resources such as Groups may be very large hence implementers SHOULD support PATCH [RFC5789] to enable partial resource modifications. Hunt, et al. Expires November 14, 2014 [Page 22] Internet-Draft draft-ietf-scim-api-05 May 2014 3.3.1. Modifying with PUT PUT performs a full update. Clients MAY retrieve the entire resource in advance, add the desired modifications and use HTTP PUT which will overwrite all previously stored data. Since the PUT request performs a full update, clients MAY send attributes of the retrieved resource and the service provider MUST process according to attribute mutability as follows: readWrite, writeOnly Any values provided SHALL replace the existing attribute values. Omitting the attribute or specific values means the attribute or specific value SHALL be removed; immutable If values are provided for elements already set in the attribute they MUST match existing data or an error is returned. If the service provider has no existing values, a new value(s) MAY be specified; and, readOnly Any values provided (e.g. meta.resourceType) SHALL be ignored. If an attribute is "required", the client MUST specify the attribute in the PUT request. If a value provided for an immutable attribute with an existing value is NOT matched, the server SHALL respond with an HTTP response code of 400 and an appropriate human readable message indicating an attempt to change an immutable attribute. Unless otherwise specified a successful PUT operation returns a 200 OK response code and the entire resource within the response body, enabling the client to correlate the client's and Provider's views of the updated resource. Example: Hunt, et al. Expires November 14, 2014 [Page 23] Internet-Draft draft-ietf-scim-api-05 May 2014 PUT /Users/2819c223-7f76-453a-919d-413861904646 Host: example.com Accept: application/json Content-Type: application/json Authorization: Bearer h480djs93hd8 If-Match: W/"a330bc54f0671c9" { "schemas":["urn:scim:schemas:core:2.0:User"], "id":"2819c223-7f76-453a-919d-413861904646", "userName":"bjensen", "externalId":"bjensen", "name":{ "formatted":"Ms. Barbara J Jensen III", "familyName":"Jensen", "givenName":"Barbara", "middleName":"Jane" }, "emails":[ { "value":"bjensen@example.com" }, { "value":"babs@jensen.org" } ] } Hunt, et al. Expires November 14, 2014 [Page 24] Internet-Draft draft-ietf-scim-api-05 May 2014 The service responds with the entire, updated User: HTTP/1.1 200 OK Content-Type: application/json ETag: W/"b431af54f0671a2" Location:"https://example.com/v2/Users/2819c223-7f76-453a-919d-413861904646" { "schemas":["urn:scim:schemas:core:2.0:User"], "id":"2819c223-7f76-453a-919d-413861904646", "userName":"bjensen", "externalId":"bjensen", "name":{ "formatted":"Ms. Barbara J Jensen III", "familyName":"Jensen", "givenName":"Barbara", "middleName":"Jane" }, "emails":[ { "value":"bjensen@example.com" }, { "value":"babs@jensen.org" } ], "meta": { "resourceType":"User", "created":"2011-08-08T04:56:22Z", "lastModified":"2011-08-08T08:00:12Z", "location":"https://example.com/v2/Users/2819c223-7f76-453a-919d-413861904646", "version":"W\/\"b431af54f0671a2\"" } } 3.3.2. Modifying with PATCH HTTP PATCH is an OPTIONAL server function that enables clients to update one or more attributes of a SCIM resource using a sequence of operations to "add", "remove", or "replace" values. The general form of the SCIM patch request is based on JavaScript Object Notation (JSON) Patch [RFC6902]. One difference between SCIM patch and JSON patch is that SCIM servers do not support array indexing and may not support all [RFC6902] operation types. The body of an HTTP PATCH request MUST contain one or more patch operation objects. A patch operation object MUST have exactly one "op" member, whose value indicates the operation to perform and MAY Hunt, et al. Expires November 14, 2014 [Page 25] Internet-Draft draft-ietf-scim-api-05 May 2014 be one of "add", "remove", or "replace" . The semantics of each operation are defined below. Operation objects MUST have exactly one "path" member which is a "String" containing an attribute path as specified by the following ABNF syntax rule: PATH = attrPath / valuePath [subAttr] Figure 4: SCIM Patch PATH Rule The rules, "attrPath", "valuePath", and "subAttr" are defined in Section 3.2.2.2. The "valuePath" rule allows specific values of a complex, multi-valued attribute to be selected. Valid examples of "path" values are as follows: "path":"members" "path":"name.familyName" "path":"addresses[type eq \"work\"]" "path":"members[value eq \"2819c223-7f76-453a-919d-413861904646\"]" "path":"members[value eq \"2819c223-7f76-453a-919d-413861904646\"].displayName" Each operation against an attribute MUST be compatible with the attribute's mutability and schema as defined in the Attribute Types Section of [I-D.ietf-scim-core-schema]. For example, a client MAY NOT modify an attribute that has mutability "readOnly"or "immutable". However, a client MAY "add" a value to an"immutable" attribute if the attribute had no previous value. An operation that is not compatibile with an attribute's mutability or schema SHALL return an error as indicated below. Each patch operation represents a single action to be applied to the same SCIM resource specified by the request URI. Operations are applied sequentially in the order they appear in the array. Each operation in the sequence is applied to the target resource; the resulting resource becomes the target of the next operation. Evaluation continues until all operations are successfully applied or until an error condition is encountered. A patch request, regardless of the number of operations, SHALL be treated as atomic. If a single operation encounters an error Hunt, et al. Expires November 14, 2014 [Page 26] Internet-Draft draft-ietf-scim-api-05 May 2014 condition, the original SCIM resource MUST be restored, and a failure status SHALL be returned. If a request fails. the server SHALL return an HTTP response status code of 400 and a JSON detail error response containing an "error" object that SHOULD be one of the following string values: malformed_operation The JSON operation elements could not successfully be parsed. This may be due to an invalid or missing operation attribute, or it could be due to a missing attribute required by a specific operation. mutability The operation requested is not compatible with the mutability of the selected attribute. invalid_path The path attribute was invalid or malformed. no_target The "path" specified did not return a target against which the operation could be performed. invalid_value The operation "value" was missing or was not compatable with the targeted attribute's type The following is a non-normative example of an error response to a patch request. HTTP/1.1 400 Bad Request Content-Type: application/json;charset=UTF-8 Cache-Control: no-store Pragma: no-cache { "schemas": ["urn:scim:schemas:core:2.0:Error"], "Errors":[ { "error":"mutability", "error_description":"Attribute 'id' is readOnly." } ] } On successful completion, the server MUST return either a 200 OK response code and the entire resource (subject to the "attributes" Hunt, et al. Expires November 14, 2014 [Page 27] Internet-Draft draft-ietf-scim-api-05 May 2014 query parameter - see Additional Retrieval Query Parameters (Section 3.7)) within the response body, or a 204 No Content response code and the appropriate response headers for a successful patch request. The server MUST return a 200 OK if the "attributes" parameter is specified on the request. 3.3.2.1. Add Operation The "add" operation performs one of the following functions, depending upon what the target location indicated by "path" references: o If the target location does not exist, the attribute and value is added. o If the target location specifies a multi-valued attribute, a new value is added to the attribute. o if the target location specifies a single-valued attribute, the existing value is replaced. o If the target location specifies an attribute that does not exist (has no value), the attribute is added with the new value. o If the target location exists, the value is replaced. o If the target location already contains the value specified, no changes SHOULD be made to the resource and a success response SHOULD be returned. Unless other operations change the resource, this operation SHALL NOT change the modify timestamp of the resource. The operation MUST contain a "value" member whose content specifies the value to be added. The value MAY be a quoted value OR it may be a JSON object containing the sub-attributes of the complex attribute specified in the operation's "path". Hunt, et al. Expires November 14, 2014 [Page 28] Internet-Draft draft-ietf-scim-api-05 May 2014 The following example shows how to add a member to a group. Some text removed for readability ("..."): PATCH /Groups/acbf3ae7-8463-4692-b4fd-9b4da3f908ce Host: example.com Accept: application/json Content-Type: application/json Authorization: Bearer h480djs93hd8 If-Match: W/"a330bc54f0671c9" { "op":"add", "path":"members", "value":[ { "display": "Babs Jensen", "$ref": "https://example.com/v2/Users/2819c223...413861904646", "value": "2819c223-7f76-453a-919d-413861904646" } ] } The "display" Sub-Attribute in this request is optional since the value attribute uniquely identifies the user to be added. If the user was already a member of this group, no changes should be made to the resource and a success response should be returned. The server responds with either the entire updated Group or no response body: HTTP/1.1 204 No Content Authorization: Bearer h480djs93hd8 ETag: W/"b431af54f0671a2" Location: "https://example.com/Groups/acbf3ae7-8463-4692-b4fd-9b4da3f908ce" 3.3.2.2. Remove Operation The "remove" operation removes the value at the target location specified by the "path". The operation performs the following functions depending on the target location specified by "path": o If the target location is a single-value attribute, the attribute and its associated value is removed. o If the target location is a multi-valued attribute and no filter is specified, the attribute and all values are removed. o If the target location is a multi-valued attribute and a complex filter is specified comparing a "value", the values matched by the filter are removed. Hunt, et al. Expires November 14, 2014 [Page 29] Internet-Draft draft-ietf-scim-api-05 May 2014 o If the target location is a complex-multi-valued attribute and a complex filter is specified based on the attribute's sub- attributes, the matching records are removed. The following example shows how to remove a member from a group. As with the previous example, the "display" Sub-Attribute is optional. If the user was not a member of this group, no changes should be made to the resource and a success response should be returned. Note that server responses have been omitted for the rest of the PATCH examples. Remove a single member from a group. Some text removed for readability ("..."): PATCH /Groups/acbf3ae7-8463-4692-b4fd-9b4da3f908ce Host: example.com Accept: application/json Content-Type: application/json Authorization: Bearer h480djs93hd8 If-Match: W/"a330bc54f0671c9" { "op":"remove", "path":"members[value eq \"2819c223-7f76-...413861904646\"]" } Remove all members of a group: PATCH /Groups/acbf3ae7-8463-4692-b4fd-9b4da3f908ce Host: example.com Accept: application/json Content-Type: application/json Authorization: Bearer h480djs93hd8 If-Match: W/"a330bc54f0671c9" { "op":"remove","path":"members"} Removal of a value from a complex-multi-valued attribute (request headers removed for brevity): { "op":"remove", "path":"emails[type eq \"work\" and value ew \"example.com\"]" } Hunt, et al. Expires November 14, 2014 [Page 30] Internet-Draft draft-ietf-scim-api-05 May 2014 Example request to remove and add a member. Some text removed for readability ("..."): PATCH /Groups/acbf3ae7-8463-4692-b4fd-9b4da3f908ce Host: example.com Accept: application/json Content-Type: application/json Authorization: Bearer h480djs93hd8 If-Match: W/"a330bc54f0671c9" [ { "op":"remove", "path":"members[value eq\"2819c223...919d-413861904646\"]" }, { "op":"add", "path":"members", "value": [ { "display": "James Smith", "$ref": "https://example.com/v2/Users/08e1d05d...473d93df9210", "value": "08e1d05d...473d93df9210" } ] } ] Hunt, et al. Expires November 14, 2014 [Page 31] Internet-Draft draft-ietf-scim-api-05 May 2014 The following example shows how to replace all the members of a group with a different members list. Some text removed for readabilty ("..."): PATCH /Groups/acbf3ae7-8463-4692-b4fd-9b4da3f908ce Host: example.com Accept: application/json Content-Type: application/json Authorization: Bearer h480djs93hd8 If-Match: W/"a330bc54f0671c9" [ { "op":"remove","path":"members"}, { "op":"add", "path":"members", "value":[ { "display": "Babs Jensen", "$ref": "https://example.com/v2/Users/2819c223...413861904646", "value": "2819c223-7f76-453a-919d-413861904646" }, { "display": "James Smith", "$ref": "https://example.com/v2/Users/08e1d05d...473d93df9210", "value": "08e1d05d-121c-4561-8b96-473d93df9210" }] } ] 3.3.2.3. Replace Operation The "replace" operation replaces the value at the target location specified by the "path". The operation performs the following functions depending on the target location specified by "path": o If the target location is a single-value attribute, the attributes value is replaced. o If the target location is a multi-valued attribute and no filter is specified, the attribute and all values are replaced. o If the target location is a multi-valued attribute and a complex filter is specified comparing a "value", the values matched by the filter are replaced. Hunt, et al. Expires November 14, 2014 [Page 32] Internet-Draft draft-ietf-scim-api-05 May 2014 o If the target location is a complex-multi-valued attribute and a complex filter is specified based on the attribute's sub- attributes, the matching records are replaced. o If the target location is a complex-multi-valued attribute with a complex filter and a specific sub-attribute (e.g. "addresses[type eq "work"].streetAddress"), the matching sub-attribute of the matching record is replaced. The following example shows how to replace all the members of a group with a different members list in a single replace operation. Some text removed for readability ("..."): PATCH /Groups/acbf3ae7-8463-4692-b4fd-9b4da3f908ce Host: example.com Accept: application/json Content-Type: application/json Authorization: Bearer h480djs93hd8 If-Match: W/"a330bc54f0671c9" { "op":"replace", "path":"members", "value":[ { "display": "Babs Jensen", "$ref": "https://example.com/v2/Users/2819c223...413861904646", "value": "2819c223...413861904646" }, { "display": "James Smith", "$ref": "https://example.com/v2/Users/08e1d05d...473d93df9210", "value": "08e1d05d...473d93df9210" } ] } Hunt, et al. Expires November 14, 2014 [Page 33] Internet-Draft draft-ietf-scim-api-05 May 2014 The following example shows how to change a User's entire "work" address. PATCH /Users/2819c223-7f76-453a-919d-413861904646 Host: example.com Accept: application/json Content-Type: application/json Authorization: Bearer h480djs93hd8 If-Match: W/"a330bc54f0671c9" { "op":"replace", "path":"addresses[type eq \"work\"]", "value": { "type": "work", "streetAddress": "911 Universal City Plaza", "locality": "Hollywood", "region": "CA", "postalCode": "91608", "country": "US", "formatted": "911 Universal City Plaza\nHollywood, CA 91608 US", "primary": true } } The following example shows how to change a User's address. Since address does not have a value Sub-Attribute, the existing address must be removed and the modified address added. PATCH /Users/2819c223-7f76-453a-919d-413861904646 Host: example.com Accept: application/json Content-Type: application/json Authorization: Bearer h480djs93hd8 If-Match: W/"a330bc54f0671c9" { "op":"replace", "path":"addresses[type eq \"work\"].streetAddress", "value":"911 Universal City Plaza" } 3.4. Deleting Resources Clients request resource removal via DELETE. Service providers MAY choose not to permanently delete the resource, but MUST return a 404 error code for all operations associated with the previously deleted Hunt, et al. Expires November 14, 2014 [Page 34] Internet-Draft draft-ietf-scim-api-05 May 2014 Id. Service providers MUST also omit the resource from future query results. In addition the service provider MUST not consider the deleted resource in conflict calculation. For example if a User resource is deleted, a CREATE request for a User resource with the same userName as the previously deleted resource should not fail with a 409 error due to userName conflict. DELETE /Users/2819c223-7f76-453a-919d-413861904646 Host: example.com Authorization: Bearer h480djs93hd8 If-Match: W/"c310cd84f0281b7" In response to a successful delete, the server SHALL respond with successful HTTP status 204 (No Content). A non-normative example response: HTTP/1.1 204 No Content Example: client attempt to retrieve the previously deleted User GET /Users/2819c223-7f76-453a-919d-413861904646 Host: example.com Authorization: Bearer h480djs93hd8 Server Response: HTTP/1.1 404 NOT FOUND { "schemas": ["urn:scim:schemas:core:2.0:Error"], "Errors":[ { "description":"Resource 2819c223-7f76-453a-919d-413861904646 not found", "code":"404" } ] } 3.5. Bulk The SCIM bulk operation is an optional server feature that enables clients to send a potentially large collection of resource operations in a single request. The body of a a bulk operation contains a set of HTTP resource operations using one of the API supported HTTP methods; i.e., POST, PUT, PATCH or DELETE. Bulk requests are identified using the following URI: 'urn:scim:schemas:core:2.0:BulkRequest'. Bulk responses are Hunt, et al. Expires November 14, 2014 [Page 35] Internet-Draft draft-ietf-scim-api-05 May 2014 identified using the following URI: 'urn:scim:schemas:core:2.0:BulkResponse'. Bulk requests and bulk responses share many attributes. Unless otherwise specified, each attribute below is present in both bulk requests and bulk responses. The following Singular Attribute is defined in addition to the common attributes defined in SCIM core schema. failOnErrors An Integer specifying the number of errors that the service provider will accept before the operation is terminated and an error response is returned. OPTIONAL in a request. Not valid in a response. The following Complex Multi-valued Attribute is defined in addition to the common attributes defined in core schema. Operations Defines operations within a bulk job. Each operation corresponds to a single HTTP request against a resource endpoint. REQUIRED. method The HTTP method of the current operation. Possible values are POST, PUT, PATCH or DELETE. REQUIRED. bulkId The transient identifier of a newly created resource, unique within a bulk request and created by the client. The bulkId serves as a surrogate resource id enabling clients to uniquely identify newly created resources in the Response and cross reference new resources in and across operations within a bulk request. REQUIRED when method is POST. version The current resource version. Version is REQUIRED if the service provider supports ETags and the method is PUT, DELETE, or PATCH. path The resource's relative path. If the method is POST the value must specify a resource type endpoint; e.g., /Users or / Groups whereas all other method values must specify the path to a specific resource; e.g., /Users/2819c223-7f76-453a- 919d-413861904646. REQUIRED in a request. data The resource data as it would appear for a single POST, PUT or PATCH resource operation. REQUIRED in a request when method is POST, PUT and PATCH. location The resource endpoint URL. REQUIRED in a response, except in the event of a POST failure. Hunt, et al. Expires November 14, 2014 [Page 36] Internet-Draft draft-ietf-scim-api-05 May 2014 status A complex type that contains information about the success or failure of one operation within the bulk job. REQUIRED in a response. code The HTTP response code that would have been returned if a a single HTTP request would have been used. REQUIRED. description A human readable error message. REQUIRED when an error occurred. If a bulk job is processed successfully the HTTP response code 200 OK MUST be returned, otherwise an appropriate HTTP error code MUST be returned. The service provider MUST continue performing as many changes as possible and disregard partial failures. The client MAY override this behavior by specifying a value for failOnErrors attribute. The failOnErrors attribute defines the number of errors that the service provider should accept before failing the remaining operations returning the response. To be able to reference a newly created resource the attribute bulkId MUST be specified when creating new resources. The bulkId is defined by the client as a surrogate identifier in a POST operation. The service provider MUST return the same bulkId together with the newly created resource. The bulkId can then be used by the client to map the service provider id with the bulkId of the created resource. There can be more then one operation per resource in each bulk job. The Service client MUST take notice of the unordered structure of JSON and the service provider can process operations in any order. For example, if the Service client sends two PUT operations in one request, the outcome is non-deterministic. The service provider response MUST include the result of all processed operations. A location attribute that includes the resource's end point MUST be returned for all operations excluding failed POSTs. The status attribute includes information about the success or failure of one operation within the bulk job. The attribute status MUST include the code attribute that holds the HTTP response code that would have been returned if a single HTTP request would have been used. If an error occurred the status MUST also include the description attribute containing a human readable explanation of the error. Hunt, et al. Expires November 14, 2014 [Page 37] Internet-Draft draft-ietf-scim-api-05 May 2014 "status": { "code": "201" } The following is an example of a status in a failed operation. "status": { "code": "400", "description": "Request is unparseable, syntactically incorrect, or violates schema." } The following example shows how to add, update, and remove a user. The failOnErrors attribute is set to '1' indicating the service provider should return on the first error. The POST operation's bulkId value is set to 'qwerty' enabling the client to match the new User with the returned resource id '92b725cd-9465-4e7d- 8c16-01f8e146b87a'. POST /v2/Bulk Host: example.com Accept: application/json Content-Type: application/json Authorization: Bearer h480djs93hd8 Content-Length: ... { "schemas": ["urn:scim:schemas:core:2.0:BulkRequest"], "failOnErrors":1, "Operations":[ { "method":"POST", "path":"/Users", "bulkId":"qwerty", "data":{ "schemas": ["urn:scim:schemas:core:2.0:User"], "userName":"Alice" } }, { "method":"PUT", "path":"/Users/b7c14771-226c-4d05-8860-134711653041", "version":"W\/\"3694e05e9dff591\"", "data":{ "schemas": ["urn:scim:schemas:core:2.0:User"], "id":"b7c14771-226c-4d05-8860-134711653041", "userName":"Bob" Hunt, et al. Expires November 14, 2014 [Page 38] Internet-Draft draft-ietf-scim-api-05 May 2014 } }, { "method": "PATCH", "path": "/Users/5d8d29d3-342c-4b5f-8683-a3cb6763ffcc", "version": "W/\"edac3253e2c0ef2\"", "data": {[ { "op": "remove", "path": "nickName" }, { "op": "add", "path": "userName", "value": "Dave" } ]} }, { "method":"DELETE", "path":"/Users/e9025315-6bea-44e1-899c-1e07454e468b", "version":"W\/\"0ee8add0a938e1a\"" } ] } The service provider returns the following response. Hunt, et al. Expires November 14, 2014 [Page 39] Internet-Draft draft-ietf-scim-api-05 May 2014 HTTP/1.1 200 OK Content-Type: application/json { "schemas": ["urn:scim:schemas:core:2.0:BulkResponse"], "Operations": [ { "location": "https://example.com/v2/Users/92b725cd-9465-4e7d-8c16-01f8e146b87a", "method": "POST", "bulkId": "qwerty", "version": "W\/\"oY4m4wn58tkVjJxK\"", "status": { "code": "201" } }, { "location": "https://example.com/v2/Users/b7c14771-226c-4d05-8860-134711653041", "method": "PUT", "version": "W\/\"huJj29dMNgu3WXPD\"", "status": { "code": "200" } }, { "location": "https://example.com/v2/Users/5d8d29d3-342c-4b5f-8683-a3cb6763ffcc", "method": "PATCH", "version": "W\/\"huJj29dMNgu3WXPD\"", "status": { "code": "200" } }, { "location": "https://example.com/v2/Users/e9025315-6bea-44e1-899c-1e07454e468b", "method": "DELETE", "status": { "code": "204" } } ] } The following response is returned if an error occurred when attempting to create the User 'Alice'. The service provider stops processing the bulk operation and immediately returns a response to the client. The response contains the error and any successful results prior to the error. Hunt, et al. Expires November 14, 2014 [Page 40] Internet-Draft draft-ietf-scim-api-05 May 2014 HTTP/1.1 200 OK Content-Type: application/json { "schemas": ["urn:scim:schemas:core:2.0:BulkResponse"], "Operations": [ { "method": "POST", "bulkId": "qwerty", "status": { "code": "400", "description": "Request is unparseable, syntactically incorrect, or violates schema." } } ] } If the failOnErrors attribute is not specified or the service provider has not reached the error limit defined by the client the service provider will continue to process all operations. The following is an example in which all operations failed. Hunt, et al. Expires November 14, 2014 [Page 41] Internet-Draft draft-ietf-scim-api-05 May 2014 HTTP/1.1 200 OK Content-Type: application/json { "schemas": ["urn:scim:schemas:core:2.0:BulkResponse"], "Operations": [ { "method": "POST", "bulkId": "qwerty", "status": { "code": "400", "description": "Request is unparseable, syntactically incorrect, or violates schema." } }, { "location": "https://example.com/v2/Users/b7c14771-226c-4d05-8860-134711653041", "method": "PUT", "status": { "code": "412", "description": "Failed to update as user changed on the server since you last retrieved it." } }, { "location": "https://example.com/v2/Users/5d8d29d3-342c-4b5f-8683-a3cb6763ffcc", "method": "PATCH", "status": { "code": "412", "description": "Failed to update as user changed on the server since you last retrieved it." } }, { "location": "https://example.com/v2/Users/e9025315-6bea-44e1-899c-1e07454e468b", "method": "DELETE", "status": { "code": "404", "description": "Specified resource; e.g., User, does not exist." } } ] } The client can, within one bulk operation, create a new User, a new Group and add the newly created User to the newly created Group. In order to add the new User to the Group the client must use the surrogate id attribute, bulkId, to reference the User. The bulkId attribute value must be pre-pended with the literal "bulkId:"; e.g., if the bulkId is 'qwerty' the value is "bulkId:qwerty". The service Hunt, et al. Expires November 14, 2014 [Page 42] Internet-Draft draft-ietf-scim-api-05 May 2014 provider MUST replace the string "bulkId:qwerty" with the permanent resource id once created. The following example creates a User with the userName 'Alice' and a Group with the displayName 'Tour Guides' with Alice as a member. POST /v2/Bulk Host: example.com Accept: application/json Content-Type: application/json Authorization: Bearer h480djs93hd8 Content-Length: ... { "schemas": ["urn:scim:schemas:core:2.0:BulkRequest"], "Operations": [ { "method": "POST", "path": "/Users", "bulkId": "qwerty", "data": { "schemas": ["urn:scim:schemas:core:2.0:User"], "userName": "Alice" } }, { "method": "POST", "path": "/Groups", "bulkId": "ytrewq", "data": { "schemas": ["urn:scim:schemas:core:2.0:Group"], "displayName": "Tour Guides", "members": [ { "type": "user", "value": "bulkId:qwerty" } ] } } ] } The service provider returns the following response. Hunt, et al. Expires November 14, 2014 [Page 43] Internet-Draft draft-ietf-scim-api-05 May 2014 HTTP/1.1 200 OK Content-Type: application/json { "schemas": ["urn:scim:schemas:core:2.0:BulkResponse"], "Operations": [ { "location": "https://example.com/v2/Users/92b725cd-9465-4e7d-8c16-01f8e146b87a", "method": "POST", "bulkId": "qwerty", "version": "W\/\"4weymrEsh5O6cAEK\"", "status": { "code": "201" } }, { "location": "https://example.com/v2/Groups/e9e30dba-f08f-4109-8486-d5c6a331660a", "method": "POST", "bulkId": "ytrewq", "version": "W\/\"lha5bbazU3fNvfe5\"", "status": { "code": "201" } } ] } A subsequent request for the 'Tour Guides' Group ('e9e30dba- f08f-4109-8486-d5c6a331660a') returns the following: GET /v2/Groups/e9e30dba-f08f-4109-8486-d5c6a331660a Host: example.com Accept: application/json Authorization: Bearer h480djs93hd8 Hunt, et al. Expires November 14, 2014 [Page 44] Internet-Draft draft-ietf-scim-api-05 May 2014 HTTP/1.1 200 OK Content-Type: application/json Location: https://example.com/v2/Groups/e9e30dba-f08f-4109-8486-d5c6a331660a ETag: W/"lha5bbazU3fNvfe5" { "schemas": ["urn:scim:schemas:core:2.0:Group"], "id": "e9e30dba-f08f-4109-8486-d5c6a331660a", "displayName": "Tour Guides", "meta": { "resourceType": "Group", "created": "2011-08-01T18:29:49.793Z", "lastModified": "2011-08-01T20:31:02.315Z", "location": "https://example.com/v2/Groups/e9e30dba-f08f-4109-8486-d5c6a331660a", "version": "W\/\"lha5bbazU3fNvfe5\"" }, "members": [ { "value": "92b725cd-9465-4e7d-8c16-01f8e146b87a", "$ref": "https://example.com/v2/Users/92b725cd-9465-4e7d-8c16-01f8e146b87a", "type": "User" } ] } Extensions that include references to other resources MUST be handled in the same way by the service provider. The following example uses the bulkId attribute within the enterprise extension managerId attribute. Hunt, et al. Expires November 14, 2014 [Page 45] Internet-Draft draft-ietf-scim-api-05 May 2014 POST /v2/Bulk Host: example.com Accept: application/json Content-Type: application/json Authorization: Bearer h480djs93hd8 Content-Length: ... { "schemas": ["urn:scim:schemas:core:2.0:BulkRequest"], "Operations": [ { "method": "POST", "path": "/Users", "bulkId": "qwerty", "data": { "schemas": ["urn:scim:schemas:core:2.0:User"], "userName": "Alice" } }, { "method": "POST", "path": "/Users", "bulkId": "ytrewq", "data": { "schemas": [ "urn:scim:schemas:core:2.0:User", "urn:scim:schemas:extension:enterprise:2.0:User" ], "userName": "Bob", "urn:scim:schemas:extension:enterprise:2.0:User": { "employeeNumber": "11250", "manager": { "managerId": "batchId:qwerty", "displayName": "Alice" } } } } ] } The service provider MUST try to resolve circular cross references between resources in a single bulk job but MAY stop after a failed attempt and instead return the status code 409 Conflict. The following example exhibits the potential conflict. Hunt, et al. Expires November 14, 2014 [Page 46] Internet-Draft draft-ietf-scim-api-05 May 2014 POST /v2/Bulk Host: example.com Accept: application/json Content-Type: application/json Authorization: Bearer h480djs93hd8 Content-Length: ... { "schemas": ["urn:scim:schemas:core:2.0:BulkRequest"], "Operations": [ { "method": "POST", "path": "/Groups", "bulkId": "qwerty", "data": { "schemas": ["urn:scim:schemas:core:2.0:Group"], "displayName": "Group A", "members": [ { "type": "group", "value": "bulkId:ytrewq" } ] } }, { "method": "POST", "path": "/Groups", "bulkId": "ytrewq", "data": { "schemas": ["urn:scim:schemas:core:2.0:Group"], "displayName": "Group B", "members": [ { "type": "group", "value": "bulkId:qwerty" } ] } } ] } If the service provider resolved the above circular references the following is returned from a subsequent GET request. Hunt, et al. Expires November 14, 2014 [Page 47] Internet-Draft draft-ietf-scim-api-05 May 2014 GET /v2/Groups?filter=displayName sw 'Group' Host: example.com Accept: application/json Authorization: Bearer h480djs93hd8 Hunt, et al. Expires November 14, 2014 [Page 48] Internet-Draft draft-ietf-scim-api-05 May 2014 HTTP/1.1 200 OK Content-Type: application/json { "schemas": ["urn:scim:schemas:core:2.0:ListResponse"], "totalResults": 2, "Resources": [ { "id": "c3a26dd3-27a0-4dec-a2ac-ce211e105f97", "schemas": ["urn:scim:schemas:core:2.0:Group"], "displayName": "Group A", "meta": { "resourceType": "Group", "created": "2011-08-01T18:29:49.793Z", "lastModified": "2011-08-01T18:29:51.135Z", "location": "https://example.com/v2/Groups/c3a26dd3-27a0-4dec-a2ac-ce211e105f97", "version": "W\/\"mvwNGaxB5SDq074p\"" }, "members": [ { "value": "6c5bb468-14b2-4183-baf2-06d523e03bd3", "$ref": "https://example.com/v2/Groups/6c5bb468-14b2-4183-baf2-06d523e03bd3", "type": "Group" } ] }, { "id": "6c5bb468-14b2-4183-baf2-06d523e03bd3", "schemas": ["urn:scim:schemas:core:2.0:Group"], "displayName": "Group B", "meta": { "resourceType": "Group", "created": "2011-08-01T18:29:50.873Z", "lastModified": "2011-08-01T18:29:50.873Z", "location": "https://example.com/v2/Groups/6c5bb468-14b2-4183-baf2-06d523e03bd3", "version": "W\/\"wGB85s2QJMjiNnuI\"" }, "members": [ { "value": "c3a26dd3-27a0-4dec-a2ac-ce211e105f97", "$ref": "https://example.com/v2/Groups/c3a26dd3-27a0-4dec-a2ac-ce211e105f97", "type": "Group" } ] } ] } Hunt, et al. Expires November 14, 2014 [Page 49] Internet-Draft draft-ietf-scim-api-05 May 2014 The service provider MUST define the maximum number of operations and maximum payload size a client may send in a single request. If either limits are exceeded the service provider MUST return the HTTP response code 413 Request Entity Too Large. The returned response MUST specify the limit exceeded in the body of the error response. The following example the client sent a request exceeding the service provider's max payload size of 1 megabyte. POST /v2/Bulk Host: example.com Accept: application/json Content-Type: application/json Authorization: Bearer h480djs93hd8 Content-Length: 4294967296 ... HTTP/1.1 413 Request Entity Too Large Content-Type: application/json Location: https://example.com/v2/Bulk/yfCrVJhFIJagAHj8 { "schemas":["urn:scim:schemas:core:2.0:Error"], "Errors":[ { "description":"The size of the bulk operation exceeds the maxPayloadSize (1048576).", "code":"413" } ] } 3.6. Data Input/Output Formats Servers MUST accept requests and respond with JSON structured responses using UTF-8 encoding [RFC3629], UTF-8 SHALL be the default encoding format. Clients using other encodings MUST specify the format in which the data is submitted via Section 14.17 HTTP header content-type[RFC2616] and MAY specify the desired response data format via an HTTP Accept Header; e.g.,"Accept: application/json" or via URI suffix; e.g., GET /Users/2819c223-7f76-453a-919d-413861904646.json Host: example.com Hunt, et al. Expires November 14, 2014 [Page 50] Internet-Draft draft-ietf-scim-api-05 May 2014 Service providers MUST support the Accept Headers "Accept: application/json" for [RFC7159]. The format defaults to JSON if no format is specified. Singular attributes are encoded as string name-value-pairs in JSON; e.g., "attribute": "value" Multi-valued attributes in JSON are encoded as arrays; e.g., "attributes": [ "value1", "value2" ] Elements with nested elements are represented as objects in JSON; e.g, "attribute": { "subattribute1": "value1", "subattribute2": "value2" } 3.7. Additional Operation Response Parameters For any SCIM operation where a resource representation is returned (e.g. HTTP GET), the attributes normally returned are defined as the minimum attribute set plus default attributes. The minimum set are those attributes whose schema have "returned" set to "always". The defaut attribute set are those attributes whose schema have "returned" set to "default". Clients MAY request a partial resource representation on any operation that returns a resource within the response by specifying either of the mutually exclusive URL query parameters "attributes" OR "excludedAtributes" as follows: attributes When specified, each resource returned MUST contain the minimal set of resource attributes and MUST contain no other attributes or sub-attributes other than those explicitly requested. The query parameter attributes value is a comma separated list of resource attribute names in standard attribute notation (Section 3.8) form (e.g. userName, name, emails). excludedAttributes When specified, each resource returned MUST contain the minimal set of resource attributes. Additionally, the default set of attributes minus those attributes listed in "excludedAttributes"are also returned. The query parameter attributes value is a comma separated list of resource attribute names in standard attribute notation (Section 3.8) form (e.g. userName, name, emails). Hunt, et al. Expires November 14, 2014 [Page 51] Internet-Draft draft-ietf-scim-api-05 May 2014 . GET /Users/2819c223-7f76-453a-919d-413861904646?attributes=userName Host: example.com Accept: application/json Authorization: Bearer h480djs93hd8 Giving the response HTTP/1.1 200 OK Content-Type: application/json Location: https://example.com/v2/Users/2819c223-7f76-453a-919d-413861904646 ETag: W/"a330bc54f0671c9" { "schemas":["urn:scim:schemas:core:2.0:User"], "id":"2819c223-7f76-453a-919d-413861904646", "userName":"bjensen", "meta":{ "resourceType": "User", "created":"2011-08-01T18:29:49.793Z", "lastModified":"2011-08-01T18:29:49.793Z", "location":"https://example.com/v2/Users/2819c223-7f76-453a-919d-413861904646", "version":"W\/\"a330bc54f0671c9\"" } } 3.8. Attribute Notation All operations share a common scheme for referencing simple and complex attributes. In general, attributes are identified by prefixing the attribute name with its schema URN separated by a ':' character; e.g., the core User resource attribute 'userName' is identified as 'urn:scim:schemas:core:2.0:User:userName'. Clients MAY omit core schema attribute URN prefixes though MUST fully qualify extended attributes with the associated resource URN; e.g., the attribute 'age' defined in 'urn:hr:schemas:user' is fully encoded as 'urn:hr:schemas:user:age'. A Complex attributes' Sub-Attributes are referenced via nested, dot ('.') notation; i.e., {urn}:{Attribute name}.{Sub-Attribute name}. For example, the fully qualified path for a User's givenName is urn:scim:schemas:core:2.0:User:name.givenName All facets (URN, attribute and Sub-Attribute name) of the fully encoded Attribute name are case insensitive. Hunt, et al. Expires November 14, 2014 [Page 52] Internet-Draft draft-ietf-scim-api-05 May 2014 3.9. "/Me" Authenticated Subject Alias A client MAY use a URL of the form "/Me" as an URL alias for the User or other resource associated with the currently authenticated subject for any SCIM operation. A service provider MAY respond in ONE of 3 ways: o A service provider that does NOT support this feature SHOULD respond with status 403 (FORBIDDEN). o A service provider MAY choose to redirect the client using HTTP status 308 to the resource associated with the authenticated subject. The client MAY then repeat the request at the indicated location. o A service provider MAY process the SCIM request directly. In any response, the HTTP "Location" header MUST be the permanent location of the aliased resource associated with the authenticated subject. 3.10. HTTP Response Codes The SCIM Protocol uses the response status codes defined in HTTP Section 10 [RFC2616] to indicate operation success or failure. In addition to returning a HTTP response code implementers MUST return the errors in the body of the response in the client requested format containing the error response and, per the HTTP specification, human- readable explanations. Error responses are identified using the following URI: 'urn:scim:schemas:core:2.0:Error'. The following multi-valued attribute is defined in addition to those attributes defined in SCIM Core Schema: Errors The list of errors encountered by the service provider. The value attribute is a complex type with the following sub- attributes. description A human-readable explanation of the error. REQUIRED. code A string indicating the HTTP response code. REQUIRED. Implementers SHOULD handle the identified errors as described below. +--------------+---------------+------------------------------------+ | Code | Applicability | Suggested Explanation | +--------------+---------------+------------------------------------+ | 307 | GET, POST, | The client is directed to repeat | | TEMPORARY | PUT, PATCH, | the same HTTP request at the | | REDIRECT | DELETE | location identified. The client | Hunt, et al. Expires November 14, 2014 [Page 53] Internet-Draft draft-ietf-scim-api-05 May 2014 | | | SHOULD NOT use the location | | | | provided in the response as a | | | | permanent reference to the | | | | resource and SHOULD continue to | | | | use the original request URI | | | | [I-D.ietf-httpbis-p2-semantics]. | | 308 | GET, POST, | The client is directed to repeat | | PERMANENT | PUT, PATCH, | the same HTTP request at the | | REDIRECT | DELETE | location identified. The client | | | | SHOULD use the location provided | | | | in the response as the permanent | | | | reference to the resource | | | | [I-D.reschke-http-status-308]. | | 400 BAD | GET, POST, | Request is unparseable, | | REQUEST | PUT, PATCH, | syntactically incorrect, or | | | DELETE | violates schema | | 401 | GET, POST, | Authorization failure | | UNAUTHORIZED | PUT, PATCH, | | | | DELETE | | | 403 | GET, POST, | Server does not support requested | | FORBIDDEN | PUT, PATCH, | operation | | | DELETE | | | 404 NOT | GET, PUT, | Specified resource; e.g., User, | | FOUND | PATCH, DELETE | does not exist | | 409 CONFLICT | POST, PUT, | The specified version number does | | | PATCH, DELETE | not match the resource's latest | | | | version number or a service | | | | provider refused to create a new, | | | | duplicate resource | | 412 | PUT, PATCH,D | Failed to update as resource {id} | | PRECONDITION | ELETE | changed on the server last | | FAILED | | retrieved | | 413 REQUEST | POST | {"maxOperations": | | ENTITY TOO | | 1000,"maxPayload": 1048576} | | LARGE | | | | 500 INTERNAL | GET, POST, | An internal error. Implementers | | SERVER ERROR | PUT, PATCH, | SHOULD provide descriptive | | | DELETE | debugging advice | | 501 NOT | GET, POST, | Service Provider does not support | | IMPLEMENTED | PUT, PATCH, | the request operation; e.g., PATCH | | | DELETE | | +--------------+---------------+------------------------------------+ Table 7: Defined error cases Error example in response to a non-existent GET request. Hunt, et al. Expires November 14, 2014 [Page 54] Internet-Draft draft-ietf-scim-api-05 May 2014 HTTP/1.1 404 NOT FOUND { "schemas": ["urn:scim:schemas:core:2.0:Error"], "Errors":[ { "description":"Resource 2819c223-7f76-453a-919d-413861904646 not found", "code":"404" } ] } 3.11. API Versioning The Base URL MAY be appended with a version identifier as a separate segment in the URL path. At this time the only valid identifier is 'v1'. If specified, the version identifier MUST appear in the URL path immediately preceding the resource endpoint and conform to the following scheme: the character 'v' followed by the desired SCIM version number; e.g., a version 'v1' User request is specified as /v2 /Users. When specified service providers MUST perform the operation using the desired version or reject the request. When omitted service providers SHOULD perform the operation using the most recent API supported by the service provider. 3.12. Versioning Resources The API supports resource versioning via standard HTTP ETagsSection 14.19 [RFC2616]. Service providers MAY support weak ETags as the preferred mechanism for performing conditional retrievals and ensuring clients do not inadvertently overwrite each others changes, respectively. When supported SCIM ETags MUST be specified as an HTTP header and SHOULD be specified within the 'version' attribute contained in the resource's 'meta' attribute. Example: Hunt, et al. Expires November 14, 2014 [Page 55] Internet-Draft draft-ietf-scim-api-05 May 2014 POST /Users HTTP/1.1 Host: example.com Content-Type: application/json Authorization: Bearer h480djs93hd8 Content-Length: ... { "schemas":["urn:scim:schemas:core:2.0:User"], "userName":"bjensen", "externalId":"bjensen", "name":{ "formatted":"Ms. Barbara J Jensen III", "familyName":"Jensen", "givenName":"Barbara" } } The server responds with an ETag in the response header and meta structure. HTTP/1.1 201 Created Content-Type: application/json Location: https://example.com/v2/Users/2819c223-7f76-453a-919d-413861904646 ETag: W/"e180ee84f0671b1" { "schemas":["urn:scim:schemas:core:2.0:User"], "id":"2819c223-7f76-453a-919d-413861904646", "meta":{ "resourceType":"User", "created":"2011-08-01T21:32:44.882Z", "lastModified":"2011-08-01T21:32:44.882Z", "location":"https://example.com/v2/Users/2819c223-7f76-453a-919d-413861904646", "version":"W\/\"e180ee84f0671b1\"" }, "name":{ "formatted":"Ms. Barbara J Jensen III", "familyName":"Jensen", "givenName":"Barbara" }, "userName":"bjensen" } With the returned ETag, clients MAY choose to retrieve the resource only if the resource has been modified. Conditional retrieval example using If-None-Match Section 14.26 [RFC2616] header: Hunt, et al. Expires November 14, 2014 [Page 56] Internet-Draft draft-ietf-scim-api-05 May 2014 GET /Users/2819c223-7f76-453a-919d-413861904646?attributes=displayName Host: example.com Accept: application/json Authorization: Bearer h480djs93hd8 If-None-Match: W/"e180ee84f0671b1" If the resource has not changed the service provider simply returns an empty body with a 304 "Not Modified" response code. If the service providers supports versioning of resources the client MAY supply an If-Match Section 14.24 [RFC2616] header for PUT and PATCH operations to ensure that the requested operation succeeds only if the supplied ETag matches the latest service provider resource; e.g., If-Match: W/"e180ee84f0671b1" 4. Multi-Tenancy A single service provider may expose the SCIM protocol to multiple clients. Depending on the nature of the service, the clients may have authority to access and alter resources initially created by other clients. Alternatively, clients may expect to access disjoint sets of resources, and may expect that their resources are inaccessible by other clients. These scenarios are called "multi- tenancy", where each client is understood to be or represent a "tenant" of the service provider. Clients may also be multi- tenanted. The following common cases may occur: 1. All clients share all resources (no tenancy) 2. Each single client creates and accesses a private subset of resources (1 client:1 Tenant) 3. Sets of clients share sets of resources (M clients:1 Tenant) 4. One client to Multiple Tenants (1 client:M Tenants) Service providers may implement any subset of the above cases. Multi-Tenancy is OPTIONAL. The SCIM protocol does not define a scheme for multi-tenancy. The SCIM protocol does not prescribe the mechanisms whereby clients and service providers interact for: o Registering or provisioning Tenants Hunt, et al. Expires November 14, 2014 [Page 57] Internet-Draft draft-ietf-scim-api-05 May 2014 o Associating a subset of clients with a subset of the Tenants o Indicating which tenant is associated with the data in a request or response, or indicating which Tenant is the subject of a query 4.1. Associating Clients to Tenants The service provider MAY use the authentication mechanism (Section 2) to determine the identity of the client, and thus infer the associated Tenant. For implementations where a client is associated with more than one Tenant, the service provider MAY use one of the following methods for explicit specification of the Tenant. If any of these methods of allowing the client to explicitly specify the Tenant are employed, the service provider should ensure that access controls are in place to prevent or allow cross-tenant use cases. The service provider should consider precedence in cases where a client may explicitly specify a Tenant while being implicitly associated with a different Tenant. In all of these methods, the {tenant_id} is a unique identifier for the Tenant as defined by the service provider. o A URL prefix: "https://www.example.com/Tenants/{tenant_id}/v2/ Users" o A sub-domain: "https://{tenant_id}.example.com/v2/Groups" o The service provider may recognize a {tenant_id} provided by the client in an HTTP Header as the indicator of the desired target Tenant. 4.2. SCIM Identifiers with Multiple Tenants Considerations for a Multi-Tenant Implementation: The service provider may choose to implement SCIM ids which are unique across all resources for all Tenants, but this is not required. The externalId, defined by the client, is required to be unique ONLY within the resources associated with the associated Tenant. Hunt, et al. Expires November 14, 2014 [Page 58] Internet-Draft draft-ietf-scim-api-05 May 2014 5. Security Considerations 5.1. TLS Support The SCIM Protocol is based on HTTP and thus subject to the security considerations found in Section 15 of [RFC2616]. SCIM resources (e.g., Users and Groups) can contain sensitive information. Therefore, SCIM clients and service providers MUST implement TLS. Which version(s) ought to be implemented will vary over time, and depend on the widespread deployment and known security vulnerabilities at the time of implementation. At the time of this writing, TLS version 1.2 [RFC5246] is the most recent version, but has very limited actual deployment, and might not be readily available in implementation toolkits. TLS version 1.0 [RFC2246] is the most widely deployed version, and will give the broadest interoperability. 5.2. Querying Using HTTP GET Clients requesting information using query filters SHOULD give consideration to the information content of the filters and whether their exposure in a URL would represent a breach of security or confidentiality through leakage in a web browser or logs. This is particularly true for information that is legally considered "personally identifiable information" or is otherwise restricted by privacy laws. To ensure maximum security and confidentiality, clients SHOULD query using HTTP POST (see Section 3.2.3). Servers that receive HTTP GET requests using filters that contain restricted or confidential information SHOULD respond with HTTP status 403 indicating the operation is FORBIDDEN. A detialed error, "confidential_restricted" may be returned indicating the request must be submitted using POST. A non-normative example: HTTP/1.1 403 FORBIDDEN { "schemas": ["urn:scim:schemas:core:2.0:Error"], "Errors":[ { "description":"Query filter involving 'name' is restricted or confidential", "error":"confidential_restricted" } ] } Hunt, et al. Expires November 14, 2014 [Page 59] Internet-Draft draft-ietf-scim-api-05 May 2014 5.3. Universal Identifiers 6. IANA Considerations 6.1. Media Type Registration To: ietf-types@iana.org Subject: Registration of media type application/scim+json Type name: application Subtype name: scim+json Required parameters: none Optional parameters: none Encoding considerations: 8bit Security considerations: See Section 5 Interoperability considerations: The "application/scim+json" media type is intended to identify JSON structure data that conforms to the SCIM 2 api and schema specifications. Older versions of SCIM are known to informally use "application/json". Published specification: [[this document]] Applications that use this media type: It is expected that applications that use this type may be special purpose applications intended for inter-domain provisioning. Clients may also be applications (e.g. mobile applications) that need to use SCIM for self-registration of user accounts. SCIM services may be offered by web applications wishin to offer support for standards based provisioning or may be a dedicated SCIM service provider such as a "cloud directory". Content may be treated as equivalent to "application/json" type for the purpose of displaying in web browsers. Additional information: Magic number(s): File extension(s): .scim .scm Macintosh file type code(s): Hunt, et al. Expires November 14, 2014 [Page 60] Internet-Draft draft-ietf-scim-api-05 May 2014 Person & email address to contact for futher information: SCIM mailing list "" Intended usage: COMMON* (see restrictions) Restrictions on usage: For most client types, it is sufficient to recognize the content as equivalent to "application/json". Applications intending to use the SCIM API SHOULD use the application/scim+json media type. Author: Phil Hunt Change controller: IETF 7. References 7.1. Normative References [I-D.ietf-httpbis-p2-semantics] Fielding, R. and J. Reschke, "Hypertext Transfer Protocol (HTTP/1.1): Semantics and Content", draft-ietf- httpbis-p2-semantics-25 (work in progress), November 2013. [I-D.ietf-scim-core-schema] Grizzle, K., Hunt, P., Wahlstroem, E., and C. Mortimore, "System for Cross-Domain Identity Management: Core Schema", draft-ietf-scim-core-schema-03 (work in progress), February 2014. [I-D.reschke-http-status-308] Reschke, J., "The Hypertext Transfer Protocol (HTTP) Status Code 308 (Permanent Redirect)", draft-reschke-http- status-308-07 (work in progress), March 2012. [IANA.Language] Internet Assigned Numbers Authority (IANA), "Language Subtag Registry", 2005. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2246] Dierks, T. and C. Allen, "The TLS Protocol Version 1.0", RFC 2246, January 1999. [RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999. Hunt, et al. Expires November 14, 2014 [Page 61] Internet-Draft draft-ietf-scim-api-05 May 2014 [RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO 10646", STD 63, RFC 3629, November 2003. [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, January 2005. [RFC5234] Crocker, D. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, January 2008. [RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.2", RFC 5246, August 2008. [RFC5789] Dusseault, L. and J. Snell, "PATCH Method for HTTP", RFC 5789, March 2010. [RFC6750] Jones, M. and D. Hardt, "The OAuth 2.0 Authorization Framework: Bearer Token Usage", RFC 6750, October 2012. [RFC7159] Bray, T., "The JavaScript Object Notation (JSON) Data Interchange Format", RFC 7159, March 2014. 7.2. Informative References [OpenSearch] Clinton, D., "OpenSearch Protocol 1.1, Draft 5", . [Order-Operations] Wikipedia, "Order of Operations: Programming Languages", . [RFC2277] Alvestrand, H., "IETF Policy on Character Sets and Languages", BCP 18, RFC 2277, January 1998. [RFC6902] Bryan, P. and M. Nottingham, "JavaScript Object Notation (JSON) Patch", RFC 6902, April 2013. Appendix A. Contributors Samuel Erdtman (samuel@erdtman.se) Patrick Harding (pharding@pingidentity.com) Appendix B. Acknowledgments The editors would like to acknowledge the contribution and work of the past draft editors: Trey Drake, UnboundID Hunt, et al. Expires November 14, 2014 [Page 62] Internet-Draft draft-ietf-scim-api-05 May 2014 Chuck Mortimore, Salesforce The editor would like to thank the participants in the the SCIM working group for their support of this specification. Appendix C. Change Log [[This section to be removed prior to publication as an RFC]] Draft 02 - KG - Addition of schema extensibility Draft 03 - PH - Revisions based on following tickets: 24 - Add filter negation 39 - Clarification on response for DELETE 42 - Make root searches optional 49 - Add "ew" filter 50 - Filters for multi-valued complex attributes 51 - Search by Schema 53 - Standard use of term client (some was consumer) 55 - Redirect support (3xx) 56 - Make manager attribute consistent with other $ref attrs 57 - Update all "/v1" examples to '/v2" 59 - Fix capitalization per IETF editor practices 60 - Changed tags to normal and tags Draft 04 - PH - Revisions based on the following tickets: 18 - New PATCH command based on JSON Patch (RFC6902) - Provided ABNF specification for filters (used in PATCH) - Updated references to RFC4627 to RFC7159 Draft 05 - PH - Revisions based on the following tickets: 03 - Support for excludedAttributes parameter Hunt, et al. Expires November 14, 2014 [Page 63] Internet-Draft draft-ietf-scim-api-05 May 2014 13 - Change client use of Etags from MUST to MAY (correction) 23 - Clarifications regarding case exact processing. 41 - Add IANA considerations 65 - Removed X-HTTP-Method-Override support 69 - Added clarifications to intro to align with draft-nottingham- uri-get-off-my-lawn 70 - Remove SCIM_TENANT_ID header 72 - Added text to indicate UTF-8 is default and mandatory encoding format per BCP18 74 - Added security considerations for using GET with confidential attribute filters - corrected error response in JSON PATCH operation Authors' Addresses Phil Hunt (editor) Oracle Corporation Email: phil.hunt@yahoo.com Kelly Grizzle SailPoint Email: kelly.grizzle@sailpoint.com Morteza Ansari Cisco Email: morteza.ansari@cisco.com Erik Wahlstroem Technology Nexus Email: erik.wahlstrom@nexussafe.com Hunt, et al. Expires November 14, 2014 [Page 64] Internet-Draft draft-ietf-scim-api-05 May 2014 Chuck Mortimore Salesforce.com Email: cmortimore@salesforce.com Hunt, et al. Expires November 14, 2014 [Page 65]