Internet-Draft | UUID | August 2023 |
Davis, et al. | Expires 5 February 2024 | [Page] |
This specification defines the UUIDs (Universally Unique IDentifiers) and the UUID Uniform Resource Name (URN) namespace. UUIDs are also known as GUIDs (Globally Unique IDentifiers). A UUID is 128 bits long and is intended to guarantee uniqueness across space and time. UUIDs were originally used in the Apollo Network Computing System and later in the Open Software Foundation's (OSF) Distributed Computing Environment (DCE), and then in Microsoft Windows platforms.¶
This specification is derived from the DCE specification with the kind permission of the OSF (now known as The Open Group). Information from earlier versions of the DCE specification have been incorporated into this document. This document obsoletes RFC4122.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 5 February 2024.¶
Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
This specification defines the UUIDs (Universally Unique IDentifiers) and the UUID Uniform Resource Name (URN) namespace. UUIDs are also known as GUIDs (Globally Unique IDentifiers). A UUID is 128 bits long and requires no central registration process.¶
The use of UUIDs is extremely pervasive in computing. They comprise the core identifier infrastructure for many operating systems such as Microsoft Windows and applications such as the Mozilla Web browser and in many cases, become exposed in many non-standard ways.¶
This specification attempts to standardize that practice as openly as possible and in a way that attempts to benefit the entire Internet. The information here is meant to be a concise guide for those wishing to implement services using UUIDs, UUIDs in combination with URNs [RFC8141], or otherwise.¶
There is an ITU-T Recommendation and an ISO/IEC Standard [X667] that are derived from [RFC4122]. Both sets of specifications have been aligned and are fully technically compatible. In addition, a global registration function is being provided by the Telecommunications Standardization Bureau of ITU-T; for details see https://www.itu.int/en/ITU-T/asn1/Pages/UUID/uuids.aspx. Nothing in this document should be construed to override the DCE standards that defined UUIDs.¶
One of the main reasons for using UUIDs is that no centralized authority is required to administer them (although one format uses IEEE 802 node identifiers, others do not). As a result, generation on demand can be completely automated and used for a variety of purposes. The UUID generation algorithm described here supports very high allocation rates of 10 million per second per machine or more if necessary, so that they could even be used as transaction IDs.¶
UUIDs are of a fixed size (128 bits), which is reasonably small compared to other alternatives. This lends itself well to sorting, ordering, and hashing of all sorts, storing in databases, simple allocation, and ease of programming in general.¶
Since UUIDs are unique and persistent, they make excellent Uniform Resource Names. The unique ability to generate a new UUID without a registration process allows for UUIDs to be one of the URNs with the lowest minting cost.¶
Many things have changed in the time since UUIDs were originally created. Modern applications have a need to create and utilize UUIDs as the primary identifier for a variety of different items in complex computational systems, including but not limited to database keys, file names, machine or system names, and identifiers for event-driven transactions.¶
One area in which UUIDs have gained popularity is as database keys. This stems from the increasingly distributed nature of modern applications. In such cases, "auto increment" schemes often used by databases do not work well, as the effort required to coordinate sequential numeric identifiers across a network can easily become a burden. The fact that UUIDs can be used to create unique, reasonably short values in distributed systems without requiring coordination makes them a good alternative, but UUID versions 1-5 lack certain other desirable characteristics:¶
Due to the aforementioned issues, many widely distributed database applications and large application vendors have sought to solve the problem of creating a better time-based, sortable unique identifier for use as a database key. This has lead to numerous implementations over the past 10+ years solving the same problem in slightly different ways.¶
While preparing this specification, the following 16 different implementations were analyzed for trends in total ID length, bit layout, lexical formatting/encoding, timestamp type, timestamp format, timestamp accuracy, node format/components, collision handling, and multi-timestamp tick generation sequencing:¶
An inspection of these implementations and the issues described above has led to this document which intends to adapt UUIDs to address these issues.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
The following abbreviations are used in this document:¶
Universally Unique Identifier¶
Uniform Resource Names¶
Augmented Backus-Naur Form¶
Cryptographically Secure Pseudo-Random Number Generator¶
Media Access Control¶
Most Significant Bit¶
Database Management System¶
Institute of Electrical and Electronics Engineers, Inc.¶
International Telecommunication Union¶
Message Digest 5¶
Secure Hash Algorithm¶
Secure Hash Algorithm 1 with message digest of 160 bits¶
Secure Hash Algorithm with message digest size of 224 bits¶
Secure Hash Algorithm with message digest size of 256 bits¶
Secure Hash Algorithm with message digest size of 512 bits¶
Secure Hash Algorithm 3¶
Secure Hash Algorithm 3 based on KECCAK algorithm¶
Coordinated Universal Time¶
Object Identifier¶
This section is to be removed before publishing as an RFC.¶
draft-09¶
draft-08¶
draft-07¶
draft-06¶
draft-05¶
draft-04¶
draft-03¶
draft-02¶
draft-01¶
draft-00¶
The UUID format is 16 octets (128 bits); the variant bits in conjunction with the version bits described in the next sections determine finer structure. While discussing UUID formats and layout, bit definitions start at 0 and end at 127 while octet definitions start at 0 and end at 15.¶
In the absence of explicit application or presentation protocol specification to the contrary, each field is encoded with the Most Significant Byte first (known as network byte order).¶
Saving UUIDs to binary format is done by sequencing all fields in big-endian format. However there is a known caveat that Microsoft's Component Object Model (COM) GUIDs leverage little-endian when saving GUIDs. The discussion of this [MS_COM_GUID] is outside the scope of this specification.¶
UUIDs MAY be represented as binary data or integers. When in use with URNs or as text in applications, any given UUID should be represented by the "hex-and-dash" string format consisting of multiple groups of upper or lowercase alphanumeric hexadecimal characters separated by single dashes/hyphens. When used with databases please refer to Section 6.12.¶
The formal definition of the UUID string representation is provided by the following (ABNF) [RFC5234].¶
UUID = 4hexOctet "-" 2hexOctet "-" 2hexOctet "-" 2hexOctet "-" 6hexOctet hexOctet = HEXDIG HEXDIG DIGIT = %x30-39 HEXDIG = DIGIT / "A" / "B" / "C" / "D" / "E" / "F"¶
Note that the alphabetic characters may be all uppercase, all lowercase, or mixed case, as per [RFC5234], Section 2.3. An example UUID using this textual representation from the above ABNF is shown in Figure 1.¶
The same UUID from Figure 1 is represented in Binary Figure 2, Integer Figure 3 and as a URN Figure 4 defined by [RFC8141].¶
There are many other ways to define a UUID format; some examples are detailed below. Please note that this is not an exhaustive list and is only provided for informational purposes.¶
The variant field determines the layout of the UUID. That is, the interpretation of all other bits in the UUID depends on the setting of the bits in the variant field. As such, it could more accurately be called a type field; we retain the original term for compatibility. The variant field consists of a variable number of the most significant bits of octet 8 of the UUID.¶
Table 1 lists the contents of the variant field, where the letter "x" indicates a "don't-care" value.¶
Msb0 | Msb1 | Msb2 | Description |
---|---|---|---|
0 | x | x | Reserved, NCS backward compatibility and includes Nil UUID as per Section 5.9. |
1 | 0 | x | The variant specified in this document. |
1 | 1 | 0 | Reserved, Microsoft Corporation backward compatibility. |
1 | 1 | 1 | Reserved for future definition and includes Max UUID as per Section 5.10. |
Interoperability, in any form, with variants other than the one defined here is not guaranteed but is not likely to be an issue in practice.¶
Specifically for UUIDs in this document bits 64 and 65 of the UUID (bits 0 and 1 of octet 8) MUST be set to 1 and 0 as specified in row 2 of Table 1. Accordingly, all bit and field layouts avoid the use of these bits.¶
The version number is in the most significant 4 bits of octet 6 (bits 48 through 51 of the UUID).¶
Table 2 lists all of the versions for this UUID variant 10x specified in this document.¶
Msb0 | Msb1 | Msb2 | Msb3 | Version | Description |
---|---|---|---|---|---|
0 | 0 | 0 | 0 | 0 | Unused |
0 | 0 | 0 | 1 | 1 | The Gregorian time-based UUID specified in this document. |
0 | 0 | 1 | 0 | 2 | Reserved for DCE Security version, with embedded POSIX UUIDs. |
0 | 0 | 1 | 1 | 3 | The name-based version specified in this document that uses MD5 hashing. |
0 | 1 | 0 | 0 | 4 | The randomly or pseudo-randomly generated version specified in this document. |
0 | 1 | 0 | 1 | 5 | The name-based version specified in this document that uses SHA-1 hashing. |
0 | 1 | 1 | 0 | 6 | Reordered Gregorian time-based UUID specified in this document. |
0 | 1 | 1 | 1 | 7 | Unix Epoch time-based UUID specified in this document. |
1 | 0 | 0 | 0 | 8 | Reserved for custom UUID formats specified in this document. |
1 | 0 | 0 | 1 | 9 | Reserved for future definition. |
1 | 0 | 1 | 0 | 10 | Reserved for future definition. |
1 | 0 | 1 | 1 | 11 | Reserved for future definition. |
1 | 1 | 0 | 0 | 12 | Reserved for future definition. |
1 | 1 | 0 | 1 | 13 | Reserved for future definition. |
1 | 1 | 1 | 0 | 14 | Reserved for future definition. |
1 | 1 | 1 | 1 | 15 | Reserved for future definition. |
An example version/variant layout for UUIDv4 follows the table where M represents the version placement for the hexadecimal representation of 0x4 (0b0100) and the N represents the variant placement for one of the four possible hexadecimal representation of variant 10x: 0x8 (0b1000), 0x9 (0b1001), 0xA (0b1010), 0xB (0b1011)¶
It should be noted that the other remaining UUID variants found in Table 1 leverage different sub-typing/versioning mechanisms. The recording and definition of the remaining UUID variant and sub-typing combinations are outside of the scope of this document.¶
To minimize confusion about bit assignments within octets and among differing versions, the UUID record definition is provided as a grouping of fields within bit layout consisting four octets to a row. The fields are presented with the most significant one first.¶
UUID version 1 is a time-based UUID featuring a 60-bit timestamp represented by Coordinated Universal Time (UTC) as a count of 100- nanosecond intervals since 00:00:00.00, 15 October 1582 (the date of Gregorian reform to the Christian calendar).¶
UUIDv1 also features a clock sequence field which is used to help avoid duplicates that could arise when the clock is set backwards in time or if the node ID changes.¶
The node field consists of an IEEE 802 MAC address, usually the host address. For systems with multiple IEEE 802 addresses, any available one MAY be used. The lowest addressed octet (octet number 10) contains the global/local bit and the unicast/multicast bit, and is the first octet of the address transmitted on an 802.3 LAN.¶
The least significant 32 bits of the 60 bit starting timestamp. Occupies bits 0 through 31 (octets 0-3).¶
The middle 16 bits of the 60 bit starting timestamp. Occupies bits 32 through 47 (octets 4-5).¶
The 4 bit version field as defined by Section 4.2, set to 0b0001 (1). Occupies bits 48 through 51 of octet 6.¶
12 bits that will contain the most significant 12 bits from the 60 bit starting timestamp. Occupies bits 52 through 63 (octets 6-7).¶
The 2 bit variant field as defined by Section 4.1, set to 0b10. Occupies bits 64 and 65 of octet 8.¶
The 14-bits containing the clock sequence. Occupies bits 66 through 79 (octets 8-9).¶
48 bit spatially unique identifier Occupies bits 80 through 127 (octets 10-15).¶
For systems that do not have UTC available, but do have the local time, they may use that instead of UTC, as long as they do so consistently throughout the system. However, this is not recommended since generating the UTC from local time only needs a time zone offset.¶
If the clock is set backwards, or might have been set backwards (e.g., while the system was powered off), and the UUID generator can not be sure that no UUIDs were generated with timestamps larger than the value to which the clock was set, then the clock sequence MUST be changed. If the previous value of the clock sequence is known, it MAY be incremented; otherwise it SHOULD be set to a random or high-quality pseudo-random value.¶
Similarly, if the node ID changes (e.g., because a network card has been moved between machines), setting the clock sequence to a random number minimizes the probability of a duplicate due to slight differences in the clock settings of the machines. If the value of clock sequence associated with the changed node ID were known, then the clock sequence MAY be incremented, but that is unlikely.¶
The clock sequence MUST be originally (i.e., once in the lifetime of a system) initialized to a random number to minimize the correlation across systems. This provides maximum protection against node identifiers that may move or switch from system to system rapidly. The initial value MUST NOT be correlated to the node identifier.¶
For systems with no IEEE address, a randomly or pseudo-randomly generated value may be used; see Section 6.8 and Section 6.9.¶
UUID version 2 is known as DCE Security UUIDs [C309] and [C311]. As such the definition of these UUIDs is outside the scope of this specification.¶
UUID version 3 is meant for generating UUIDs from "names" that are drawn from, and unique within, some "name space" as per Section 6.5.¶
UUIDv3 values are created by computing an MD5 [RFC1321] hash over a given name space value concatenated with the desired name value after both have been converted to a canonical sequence of octets in network byte order. This MD5 value is then used to populate all 128 bits of the UUID layout. The UUID version and variant then replace the respective bits as defined by Section 4.2 and Section 4.1.¶
Some common name space values have been defined via Appendix A.¶
Where possible UUIDv5 SHOULD be used in lieu of UUIDv3. For more information on MD5 security considerations see [RFC6151].¶
The first 48 bits of the layout are filled with the most significant, left-most 48 bits from the computed MD5 value. Occupies bits 0 through 47 (octets 0-5).¶
The 4 bit version field as defined by Section 4.2, set to 0b0011 (3). Occupies bits 48 through 51 of octet 6.¶
12 more bits of the layout consisting of the least significant, right-most 12 bits of 16 bits immediately following md5_high from the computed MD5 value. Occupies bits 52 through 63 (octets 6-7).¶
The 2 bit variant field as defined by Section 4.1, set to 0b10. Occupies bits 64 and 65 of octet 8.¶
The final 62 bits of the layout immediately following the var field to be filled with the least-significant, right-most bits of the final 64 bits from the computed MD5 value. Occupies bits 66 through 127 (octets 8-15)¶
UUID version 4 is meant for generating UUIDs from truly-random or pseudo-random numbers.¶
An implementation may generate 128 bits of random data which is used to fill out the UUID fields in Figure 8. The UUID version and variant then replace the respective bits as defined by Section 4.2 and Section 4.1.¶
Alternatively, an implementation MAY choose to randomly generate the exact required number of bits for random_a, random_b, and random_c (122 bits total), and then concatenate the version and variant in the required position.¶
For guidelines on random data generation see Section 6.8.¶
The first 48 bits of the layout that can be filled with random data as specified in Section 6.8. Occupies bits 0 through 47 (octets 0-5).¶
The 4 bit version field as defined by Section 4.2, set to 0b0100 (4). Occupies bits 48 through 51 of octet 6.¶
12 more bits of the layout that can be filled random data as per Section 6.8. Occupies bits 52 through 63 (octets 6-7).¶
The 2 bit variant field as defined by Section 4.1, set to 0b10. Occupies bits 64 and 65 of octet 8.¶
The final 62 bits of the layout immediately following the var field to be filled with random data as per Section 6.8. Occupies bits 66 through 127 (octets 8-15).¶
UUID version 5 is meant for generating UUIDs from "names" that are drawn from, and unique within, some "name space" as per Section 6.5.¶
UUIDv5 values are created by computing an SHA-1 [FIPS180-4] hash over a given name space value concatenated with the desired name value after both have been converted to a canonical sequence of octets in network byte order. This SHA-1 value is then used to populate all 128 bits of the UUID layout. Excess bits beyond 128 are discarded. The UUID version and variant then replace the respective bits as defined by Section 4.2 and Section 4.1.¶
Some common name space values have been defined via Appendix A.¶
There may be scenarios, usually depending on organizational security policies, where SHA-1 libraries may not be available or deemed unsafe for use. As such it may be desirable to generate name-based UUIDs derived from SHA-256 or newer SHA methods. These name-based UUIDs MUST NOT utilize UUIDv5 and MUST be within the UUIDv8 space defined by Section 5.8. For implementation guidance around utilizing UUIDv8 for name-based UUIDs refer to the sub-section of Section 6.5.¶
For more information on SHA-1 security considerations see [RFC6194].¶
The first 48 bits of the layout are filled with the most significant, left-most 48 bits from the computed SHA-1 value. Occupies bits 0 through 47 (octets 0-5).¶
The 4 bit version field as defined by Section 4.2, set to 0b0101 (5). Occupies bits 48 through 51 of octet 6.¶
12 more bits of the layout consisting of the least significant, right-most 12 bits of 16 bits immediately following sha1_high from the computed SHA-1 value. Occupies bits 52 through 63 (octets 6-7).¶
The 2 bit variant field as defined by Section 4.1, set to 0b10. Occupies bits 64 and 65 of octet 8.¶
The final 62 bits of the layout immediately following the var field to be filled by skipping the 2 most significant, left-most bits of the remaining SHA-1 hash and then using the next 62 most significant, left-most bits. Any leftover SHA-1 bits are discarded and unused. Occupies bits 66 through 127 (octets 8-15).¶
UUID version 6 is a field-compatible version of UUIDv1 Section 5.1, reordered for improved DB locality. It is expected that UUIDv6 will primarily be used in contexts where there are existing v1 UUIDs. Systems that do not involve legacy UUIDv1 SHOULD use UUIDv7 instead.¶
Instead of splitting the timestamp into the low, mid, and high sections from UUIDv1, UUIDv6 changes this sequence so timestamp bytes are stored from most to least significant. That is, given a 60 bit timestamp value as specified for UUIDv1 in Section 5.1, for UUIDv6, the first 48 most significant bits are stored first, followed by the 4 bit version (same position), followed by the remaining 12 bits of the original 60 bit timestamp.¶
The clock sequence and node bits remain unchanged from their position in Section 5.1.¶
The clock sequence and node bits SHOULD be reset to a pseudo-random value for each new UUIDv6 generated; however, implementations MAY choose to retain the old clock sequence and MAC address behavior from Section 5.1. For more information on MAC address usage within UUIDs see the Section 8.¶
The format for the 16-byte, 128 bit UUIDv6 is shown in Figure 10.¶
The most significant 32 bits of the 60 bit starting timestamp. Occupies bits 0 through 31 (octets 0-3).¶
The middle 16 bits of the 60 bit starting timestamp. Occupies bits 32 through 47 (octets 4-5).¶
The 4 bit version field as defined by Section 4.2, set to 0b0110 (6). Occupies bits 48 through 51 of octet 6.¶
12 bits that will contain the least significant 12 bits from the 60 bit starting timestamp. Occupies bits 52 through 63 (octets 6-7).¶
The 2 bit variant field as defined by Section 4.1, set to 0b10. Occupies bits 64 and 65 of octet 8.¶
The 14 bits containing the clock sequence. Occupies bits 66 through 79 (octets 8-9).¶
48 bit spatially unique identifier Occupies bits 80 through 127 (octets 10-15).¶
With UUIDv6 the steps for splitting the timestamp into time_high and time_mid are OPTIONAL since the 48 bits of time_high and time_mid will remain in the same order. An extra step of splitting the first 48 bits of the timestamp into the most significant 32 bits and least significant 16 bits proves useful when reusing an existing UUIDv1 implementation.¶
UUID version 7 features a time-ordered value field derived from the widely implemented and well known Unix Epoch timestamp source, the number of milliseconds since midnight 1 Jan 1970 UTC, leap seconds excluded. UUIDv7 generally has improved entropy characteristics over UUIDv1 Section 5.1 or UUIDv6 Section 5.6.¶
UUIDv7 values are created by allocating a Unix timestamp in milliseconds in the most significant 48 bits and filling the remaining 74 bits, excluding the required version and variant bits, with random bits for each new UUIDv7 generated to provide uniqueness as per Section 6.8. Alternatively, implementations MAY fill the 74 bits, jointly, with a combination of the following subfields, in this order from the most significant bits to the least, to guarantee additional monotonicity within a millisecond:¶
Implementations SHOULD utilize UUIDv7 instead of UUIDv1 and UUIDv6 if possible.¶
48 bit big-endian unsigned number of Unix epoch timestamp in milliseconds as per Section 6.1. Occupies bits 0 through 47 (octets 0-5).¶
The 4 bit version field as defined by Section 4.2, set to 0b0111 (7). Occupies bits 48 through 51 of octet 6.¶
12 bits pseudo-random data to provide uniqueness as per Section 6.8 and/or optional constructs to guarantee additional monotonicity as per Section 6.2. Occupies bits 52 through 63 (octets 6-7).¶
The 2 bit variant field as defined by Section 4.1, set to 0b10. Occupies bits 64 and 65 of octet 8.¶
The final 62 bits of pseudo-random data to provide uniqueness as per Section 6.8 and/or an optional counter to guarantee additional monotonicity as per Section 6.2. Occupies bits 66 through 127 (octets 8-15).¶
UUID version 8 provides an RFC-compatible format for experimental or vendor-specific use cases. The only requirement is that the variant and version bits MUST be set as defined in Section 4.1 and Section 4.2. UUIDv8's uniqueness will be implementation-specific and MUST NOT be assumed.¶
The only explicitly defined bits are the version and variant, leaving 122 bits for implementation specific UUIDs. To be clear: UUIDv8 is not a replacement for UUIDv4 Section 5.4 where all 122 extra bits are filled with random data.¶
Some example situations in which UUIDv8 usage could occur:¶
The first 48 bits of the layout that can be filled as an implementation sees fit. Occupies bits 0 through 47 (octets 0-5).¶
The 4 bit version field as defined by Section 4.2, set to 0b1000 (8). Occupies bits 48 through 51 of octet 6.¶
12 more bits of the layout that can be filled as an implementation sees fit. Occupies bits 52 through 63 (octets 6-7).¶
The 2 bit variant field as defined by Section 4.1, set to 0b10. Occupies bits 64 and 65 of octet 8.¶
The final 62 bits of the layout immediately following the var field to be filled as an implementation sees fit. Occupies bits 66 through 127 (octets 8-15).¶
The nil UUID is special form of UUID that is specified to have all 128 bits set to zero.¶
A Nil UUID value can be useful to communicate the absence of any other UUID value in situations that otherwise require or use a 128-bit UUID. A Nil UUID can express the concept "no such value here". Thus it is reserved for such use as needed for implementation-specific situations.¶
The Max UUID is special form of UUID that is specified to have all 128 bits set to 1. This UUID can be thought of as the inverse of Nil UUID defined in Section 5.9.¶
A Max UUID value can be used as a sentinel value in situations where a 128-bit UUID is required but a concept such as "end of UUID list" needs to be expressed, and is reserved for such use as needed for implementation-specific situations.¶
The minimum requirements for generating UUIDs are described in this document for each version. Everything else is an implementation detail and up to the implementer to decide what is appropriate for a given implementation. Various relevant factors are covered below to help guide an implementer through the different trade-offs among differing UUID implementations.¶
UUID timestamp source, precision, and length was the topic of great debate while creating UUIDv7 for this specification. Choosing the right timestamp for your application is a very important topic. This section will detail some of the most common points on this topic.¶
Implementations acquire the current timestamp from a reliable source to provide values that are time-ordered and continually increasing. Take care to ensure that timestamp changes from the environment or operating system are handled in a way that is consistent with implementation requirements. For example, if it is possible for the system clock to move backward due to either manual adjustment or corrections from a time synchronization protocol, implementations need to determine how to handle such cases. (See Altering, Fuzzing, or Smearing below.)¶
UUID version 1 and 6 both utilize a Gregorian epoch timestamp while UUIDv7 utilizes a Unix Epoch timestamp. If other timestamp sources or a custom timestamp epoch are required, UUIDv8 MUST be used.¶
Many levels of precision exist for timestamps: milliseconds, microseconds, nanoseconds, and beyond. Additionally fractional representations of sub-second precision may be desired to mix various levels of precision in a time-ordered manner. Furthermore, system clocks themselves have an underlying granularity and it is frequently less than the precision offered by the operating system. With UUID version 1 and 6, 100-nanoseconds of precision are present while UUIDv7 features millisecond level of precision by default within the Unix epoch that does not exceed the granularity capable in most modern systems. For other levels of precision UUIDv8 is available. Similar to Section 6.2, with UUIDv1 or UUIDv6, a high resolution timestamp can be simulated by keeping a count of the number of UUIDs that have been generated with the same value of the system time, and using it to construct the low order bits of the timestamp. The count will range between zero and the number of 100-nanosecond intervals per system time interval.¶
The length of a given timestamp directly impacts how long a given UUID will be valid. That is, how many timestamp ticks can be contained in a UUID before the maximum value for the timestamp field is reached. Take care to ensure that the proper length is selected for a given timestamp. UUID version 1 and 6 utilize a 60 bit timestamp valid until 5623 AD and UUIDv7 features a 48 bit timestamp valid until the year 10889 AD.¶
Implementations MAY alter the actual timestamp. Some examples include security considerations around providing a real clock value within a UUID, to correct inaccurate clocks, or to handle leap seconds. This specification makes no requirement or guarantee about how close the clock value needs to be to the actual time. If UUIDs do not need to be frequently generated, the UUIDv1 or UUIDv6 timestamp can simply be the system time multiplied by the number of 100-nanosecond intervals per system time interval.¶
When timestamp padding is required, implementations MUST pad the most significant bits (left-most) bits with zeros. An example is padding the most significant, left-most bits of a Unix timestamp with zeros to fill out the 48 bit timestamp in UUIDv7. An alternative is to pad the most significant, left-most bits with the number of 32 bit Unix timestamp roll-overs after 2038-01-19.¶
When timestamps need to be truncated, the lower, least significant bits MUST be used. An example would be truncating a 64 bit Unix timestamp to the least significant, right-most 48 bits for UUIDv7.¶
If a system overruns the generator by requesting too many UUIDs within a single system time interval, the UUID service can return an error, or stall the UUID generator until the system clock catches up, and MUST NOT return knowingly duplicate values due to counter rollover. Note that if the processors overrun the UUID generation frequently, additional node identifiers can be allocated to the system, which will permit higher speed allocation by making multiple UUIDs potentially available for each time stamp value. Similar techniques are discussed in Section 6.4.¶
Monotonicity (each subsequent value being greater than the last) is the backbone of time-based sortable UUIDs. Normally, time-based UUIDs from this document will be monotonic due to an embedded timestamp; however, implementations can guarantee additional monotonicity via the concepts covered in this section.¶
Take care to ensure UUIDs generated in batches are also monotonic. That is, if one thousand UUIDs are generated for the same timestamp, there should be sufficient logic for organizing the creation order of those one thousand UUIDs. Batch UUID creation implementations MAY utilize a monotonic counter that increments for each UUID created during a given timestamp.¶
For single-node UUID implementations that do not need to create batches of UUIDs, the embedded timestamp within UUID version 6 and 7 can provide sufficient monotonicity guarantees by simply ensuring that timestamp increments before creating a new UUID. Distributed nodes are discussed in Section 6.4.¶
Implementations SHOULD employ the following methods for single-node UUID implementations that require batch UUID creation, or are otherwise concerned about monotonicity with high frequency UUID generation.¶
Some implementations allocate a specific number of bits in the UUID layout to the sole purpose of tallying the total number of UUIDs created during a given UUID timestamp tick. A fixed bit-length counter, if present, MUST be positioned immediately after the embedded timestamp. This promotes sortability and allows random data generation for each counter increment. With this method, the rand_a section (or a subset of its left-most bits) of UUIDv7 is used as fixed-length dedicated counter bits that are incremented for every UUID generation. The trailing random bits generated for each new UUID in rand_b can help produce unguessable UUIDs. In the event more counter bits are required, the most significant (left-most) bits of rand_b MAY be used as additional counter bits.¶
With this method, the random data is extended to also function as a counter. This monotonic value can be thought of as a "randomly seeded counter" which MUST be incremented in the least significant position for each UUID created on a given timestamp tick. UUIDv7's rand_b section SHOULD be utilized with this method to handle batch UUID generation during a single timestamp tick. The increment value for every UUID generation is a random integer of any desired length larger than zero. It ensures the UUIDs retain the required level of unguessability provided by the underlying entropy. The increment value MAY be one when the number of UUIDs generated in a particular period of time is important and guessability is not an issue. However, it SHOULD NOT be used by implementations that favor unguessablity, as the resulting values are easily guessable.¶
For UUIDv7, which has millisecond timestamp precision, it is possible to use additional clock precision available on the system to substitute for up to 12 random bits immediately following the timestamp. This can provide values that are time-ordered with sub-millisecond precision, using however many bits are appropriate in the implementation environment. With this method, the additional time precision bits MUST follow the timestamp as the next available bit, in the rand_a field for UUIDv7.¶
To calculate this value, start with the portion of the timestamp expressed as a fraction of clock's tick value (fraction of a millisecond for UUIDv7). Compute the count of possible values that can be represented in the available bit space, 4096 for the UUIDv7 rand_a field. Using floating point math, multiply this fraction of a millisecond value by 4096 and round down (toward zero) to an integer result to arrive at a number between 0 and the maximum allowed for the indicated bits which is sorts monotonically based on time. Each increasing fractional value will result in an increasing bit field value, to the precision available with these bits.¶
For example, let's assume a system timestamp of 1 Jan 2023 12:34:56.1234567. Taking the precision greater than 1ms gives us a value of 0.4567, as a fraction of a millisecond. If we wish to encode this as 12 bits, we can take the count of possible values that fit in those bits (4096, or 2 to the 12th power) and multiply it by our millisecond fraction value of 0.4567 and truncate the result to an integer, which gives an integer value of 1870. Expressed as hexadecimal it is 0x74E, or the binary bits 0b011101001110. One can then use those 12 bits as the most significant (left-most) portion of the random section of the UUID (e.g., the rand_a field in UUIDv7). This works for any desired bit length that fits into a UUID, and applications can decide the appropriate length based on available clock precision, but for UUIDv7, it is limited to 12 bits at maximum to reserve sufficient space for random bits.¶
The main benefit to encoding additional timestamp precision is that it utilizes additional time precision already available in the system clock to provide values that are more likely to be unique, and thus may simplify certain implementations. This technique can also be used in conjunction with one of the other methods, where this additional time precision would immediately follow the timestamp, and then if any bits are to be used as clock sequence they would follow next.¶
The following sub-topics cover topics related solely with creating reliable fixed-length dedicated counters:¶
Implementations utilizing the fixed-length counter method randomly initialize the counter with each new timestamp tick. However, when the timestamp has not incremented, the counter is frozen and incremented via the desired increment logic. When utilizing a randomly seeded counter alongside Method 1, the random value MAY be regenerated with each counter increment without impacting sortability. The downside is that Method 1 is prone to overflows if a counter of adequate length is not selected or the random data generated leaves little room for the required number of increments. Implementations utilizing fixed-length counter method MAY also choose to randomly initialize a portion counter rather than the entire counter. For example, a 24 bit counter could have the 23 bits in least-significant, right-most, position randomly initialized. The remaining most significant, left-most counter bits are initialized as zero for the sole purpose of guarding against counter rollovers.¶
Select a counter bit-length that can properly handle the level of timestamp precision in use. For example, millisecond precision generally requires a larger counter than a timestamp with nanosecond precision. General guidance is that the counter SHOULD be at least 12 bits but no longer than 42 bits. Take care to ensure that the counter length selected leaves room for sufficient entropy in the random portion of the UUID after the counter. This entropy helps improve the unguessability characteristics of UUIDs created within the batch.¶
The following sub-topics cover rollover handling with either type of counter method:¶
The technique from Fixed-Length Dedicated Counter Seeding that describes allocating a segment of the fixed-length counter as a rollover guard is also helpful to mitigate counter rollover issues. This same technique can be used with monotonic random counter methods by ensuring the total length of a possible increment in the least significant, right most position is less than the total length of the random being incremented. As such the most significant, left-most, bits can be incremented as rollover guarding.¶
Counter rollovers MUST be handled by the application to avoid sorting issues. The general guidance is that applications that care about absolute monotonicity and sortability should freeze the counter and wait for the timestamp to advance which ensures monotonicity is not broken. Alternatively, implementations MAY increment the timestamp ahead of the actual time and reinitialize the counter.¶
Implementations MAY use the following logic to ensure UUIDs featuring embedded counters are monotonic in nature:¶
Implementations SHOULD check if the currently generated UUID is greater than the previously generated UUID. If this is not the case then any number of things could have occurred, such as clock rollbacks, leap second handling, and counter rollovers. Applications SHOULD embed sufficient logic to catch these scenarios and correct the problem to ensure that the next UUID generated is greater than the previous, or at least report an appropriate error. To handle this scenario, the general guidance is that application MAY reuse the previous timestamp and increment the previous counter method.¶
The (optional) UUID generator state only needs to be read from stable storage once at boot time, if it is read into a system-wide shared volatile store (and updated whenever the stable store is updated).¶
This stable storage MAY be used to record various portions of the UUID generation which prove useful for batch UUID generation purposes and monotonic error checking with UUIDv6 and UUIDv7. These stored values include but are not limited to last known timestamp, clock sequence, counters, and random data.¶
If an implementation does not have any stable store available, then it MAY proceed with UUID generation as if this was the first UUID created within a batch. This is the least desirable implementation because it will increase the frequency of creation of values such as clock sequence, counters, or random data, which increases the probability of duplicates.¶
An implementation MAY also return an application error in the event that collision resistance is of the utmost concern. The semantics of this error are up to the application and implementation. See Section 6.6 for more information on weighting collision tolerance in applications.¶
For UUIDv1 and UUIDv6, if the node ID can never change (e.g., the network interface card from which the node ID is derived is inseparable from the system), or if any change also re-initializes the clock sequence to a random value, then instead of keeping it in stable store, the current node ID may be returned.¶
For UUIDv1 and UUIDv6, the state does not always need to be written to stable store every time a UUID is generated. The timestamp in the stable store can be periodically set to a value larger than any yet used in a UUID. As long as the generated UUIDs have timestamps less than that value, and the clock sequence and node ID remain unchanged, only the shared volatile copy of the state needs to be updated. Furthermore, if the timestamp value in stable store is in the future by less than the typical time it takes the system to reboot, a crash will not cause a re-initialization of the clock sequence.¶
If it is too expensive to access shared state each time a UUID is generated, then the system-wide generator can be implemented to allocate a block of time stamps each time it is called; a per- process generator can allocate from that block until it is exhausted.¶
The requirements for name-based UUIDs are as follows:¶
The concept of name (and namespace) should be broadly construed and not limited to textual names. For example, at the time of this specification, [RFC8499] domain name system (DNS) has three conveyance formats: common (www.example.com), presentation (www.example.com.) and wire format (3www7example3com0). Looking at [X500] distinguished names (DNs), the previous version of this specification allowed either text based or binary distinguished encoding rules (DER) based names as inputs. For [RFC1738] uniform resource locators (URLs), one could provide a fully-qualified domain-name (FQDN) with or without the protocol identifier (www.example.com) or (https://www.example.com). When it comes to [X660] object identifiers (OIDs) one could choose dot-notation without the leading dot (2.999), choose to include the leading dot (.2.999) or select of of the many formats from [X680] such as OID Internationalized Resource Identifier (OID-IRI) (/Joint-ISO-ITU-T/Example). While most users may default to the common format for DNS, FQDN format for a URL, text format for X.500 and dot-notation without a leading dot for OID; name-based UUID implementations generally SHOULD allow arbitrary input which will compute name-based UUIDs for any of the aforementioned example names and others not defined here. Each name format within a name space will output different UUIDs. As such, the mechanisms or conventions used for allocating names and ensuring their uniqueness within their name spaces are beyond the scope of this specification.¶
While Appendix A details a few interesting namespaces; implementations SHOULD provide the ability to input a custom namespace. For example, any other UUID MAY be generated and used as the desired namespace input for a given application context to ensure all names created are unique within the newly created namespace.¶
As per Section 5.5 name-based UUIDs that desire to use modern hashing algorithms MUST be created within the UUIDv8 space. These MAY leverage newer hashing protocols such as SHA-256 or SHA-512 defined by [FIPS180-4], SHA-3 or SHAKE defined by [FIPS202], or even protocols that have not been defined yet. To ensure UUIDv8 name-based UUID values of different hashing protocols can exist in the same bit space; this document defines various "hashspaces" in Appendix B. Creation of name-based version 8 UUIDs follows the same logic defined in Section 5.5, but the hashspace should be used as the starting point with the desired namespace and name concatenated to the end of the hashspace. Then an implementation may apply the desired hashing algorithm to the entire value after all have been converted to a canonical sequence of octets in network byte order. Ensure the version and variant and variant bits are modified as per Section 5.8 bit layout, and finally trim any excess bits beyond 128. An important note for secure hashing algorithms that produce variable rate outputs, such as those found in SHAKE, the output hash MUST be 128 bits or larger. See Appendix C.8 for a SHA-256 UUIDv8 example test vector.¶
Name-based UUIDs utilizing UUIDv8 do not allocate any available bits to identifying the hashing algorithm. As such where common knowledge about the hashing algorithm for a given UUIDv8 name-space UUID is required, sharing the Hash Space ID proves useful for identifying the algorithm. That is, to detail SHA-256 was used to create a given UUIDv8 name-based UUID an implementation may also share the "3fb32780-953c-4464-9cfd-e85dbbe9843d" hash space which uniquely identifies the SHA-256 hashing algorithm for the purpose of UUIDv8. Mind you that this need not be the only method of sharing the hashing algorithm; this is one example of how two systems could share knowledge. The protocol of choice, communication channels, and actual method of sharing this data between systems are outside the scope of this specification.¶
Implementations should weigh the consequences of UUID collisions within their application and when deciding between UUID versions that use entropy (randomness) versus the other components such as those in Section 6.1 and Section 6.2. This is especially true for distributed node collision resistance as defined by Section 6.4.¶
There are two example scenarios below which help illustrate the varying seriousness of a collision within an application.¶
A UUID collision generated a duplicate log entry which results in incorrect statistics derived from the data. Implementations that are not negatively affected by collisions may continue with the entropy and uniqueness provided by the traditional UUID format.¶
A duplicate key causes an airplane to receive the wrong course which puts people's lives at risk. In this scenario there is no margin for error. Collisions MUST be avoided and failure is unacceptable. Applications dealing with this type of scenario MUST employ as much collision resistance as possible within the given application context.¶
UUIDs created by this specification MAY be used to provide local uniqueness guarantees. For example, ensuring UUIDs created within a local application context are unique within a database MAY be sufficient for some implementations where global uniqueness outside of the application context, in other applications, or around the world is not required.¶
Although true global uniqueness is impossible to guarantee without a shared knowledge scheme, a shared knowledge scheme is not required by UUID to provide uniqueness for practical implementation purposes. Implementations MAY implement a shared knowledge scheme introduced in Section 6.4 as they see fit to extend the uniqueness guaranteed by this specification.¶
Implementations SHOULD utilize a cryptographically secure pseudo-random number generator (CSPRNG) to provide values that are both difficult to predict ("unguessable") and have a low likelihood of collision ("unique"). The exception is when a suitable CSPRNG is unavailable in the execution environment. Take care to ensure the CSPRNG state is properly reseeded upon state changes, such as process forks, to ensure proper CSPRNG operation. CSPRNG ensures the best of Section 6.6 and Section 8 are present in modern UUIDs.¶
Further advice on generating cryptographic-quality random numbers can be found in [RFC4086], [RFC8937] and in [RANDOM].¶
This section describes how to generate a UUIDv1 or UUIDv6 value if an IEEE 802 address is not available, or its use is not desired.¶
Implementations obtain a 47-bit cryptographic-quality random number as per Section 6.8 and use it as the low 47 bits of the node ID.¶
Implementations MUST set the least significant bit of the first octet of the node ID set to one to create a 48-bit node id. This bit is the unicast/multicast bit, which will never be set in IEEE 802 addresses obtained from network cards. Hence, there can never be a conflict between UUIDs generated by machines with and without network cards.¶
For compatibility with earlier specifications, note that this document uses the unicast/multicast bit, instead of the arguably more correct local/global bit because MAC addresses with the local/global bit set or not are both possible in a network. This is not the case with the unicast/multicast bit. One node cannot have a MAC address that multicasts to multiple nodes.¶
In addition, items such as the computer's name and the name of the operating system, while not strictly speaking random, will help differentiate the results from those obtained by other systems.¶
The exact algorithm to generate a node ID using these data is system specific, because both the data available and the functions to obtain them are often very system specific. A generic approach, however, is to accumulate as many sources as possible into a buffer, use a message digest such as MD5 [RFC1321] or SHA-1 [FIPS180-4], take an arbitrary 6 bytes from the hash value, and set the multicast bit as described above.¶
UUIDv6 and UUIDv7 are designed so that implementations that require sorting (e.g., database indexes) sort as opaque raw bytes, without need for parsing or introspection.¶
Time ordered monotonic UUIDs benefit from greater database index locality because the new values are near each other in the index. As a result objects are more easily clustered together for better performance. The real-world differences in this approach of index locality vs random data inserts can be quite large.¶
UUIDs formats created by this specification are intended to be lexicographically sortable while in the textual representation.¶
UUIDs created by this specification are crafted with big-endian byte order (network byte order) in mind. If little-endian style is required, UUIDv8 is available for custom UUID formats.¶
UUIDs SHOULD be treated as opaque values and implementations SHOULD NOT examine the bits in a UUID. However, inspectors MAY refer to Section 4.1 and Section 4.2 when required to determine UUID version and variant.¶
As general guidance, we recommend not parsing UUID values unnecessarily, and instead treating them as opaquely as possible. Although application-specific concerns could of course require some degree of introspection (e.g., to examine the variant, version or perhaps the timestamp of a UUID), the advice here is to avoid this or other parsing unless absolutely necessary. Applications typically tend to be simpler, more interoperable, and perform better, when this advice is followed.¶
For many applications, such as databases, storing UUIDs as text is unnecessarily verbose, requiring 288 bits to represent 128 bit UUID values. Thus, where feasible, UUIDs SHOULD be stored within database applications as the underlying 128 bit binary value.¶
For other systems, UUIDs MAY be stored in binary form or as text, as appropriate. The trade-offs to both approaches are:¶
DBMS vendors are encouraged to provide functionality to generate and store UUID formats defined by this specification for use as identifiers or left parts of identifiers such as, but not limited to, primary keys, surrogate keys for temporal databases, foreign keys included in polymorphic relationships, and keys for key-value pairs in JSON columns and key-value databases. Applications using a monolithic database may find using database-generated UUIDs (as opposed to client-generate UUIDs) provides the best UUID monotonicity. In addition to UUIDs, additional identifiers MAY be used to ensure integrity and feedback.¶
There is no update required to the IANA URN namespace registration [URNNamespaces] for UUID filed in [RFC4122]. Further, at this time the authors and working group have concluded that IANA is not required to track UUIDs used for identifying items such as versions, variants, namespaces, or hashspaces.¶
Implementations SHOULD NOT assume that UUIDs are hard to guess. For example, they MUST NOT be used as security capabilities (identifiers whose mere possession grants access). Discovery of predictability in a random number source will result in a vulnerability.¶
Implementations MUST NOT assume that it is easy to determine if a UUID has been slightly transposed in order to redirect a reference to another object. Humans do not have the ability to easily check the integrity of a UUID by simply glancing at it.¶
MAC addresses pose inherent security risks and SHOULD NOT be used within a UUID. Instead CSPRNG data SHOULD be selected from a source with sufficient entropy to ensure guaranteed uniqueness among UUID generation. See Section 6.8 and Section 6.9 for more information.¶
Timestamps embedded in the UUID do pose a very small attack surface. The timestamp in conjunction with an embedded counter does signal the order of creation for a given UUID and its corresponding data but does not define anything about the data itself or the application as a whole. If UUIDs are required for use with any security operation within an application context in any shape or form then UUIDv4, Section 5.4 SHOULD be utilized.¶
See [RFC6151] for MD5 Security Considerations and [RFC6194] for SHA-1 security considerations.¶
The authors gratefully acknowledge the contributions of Rich Salz, Michael Mealling, Ben Campbell, Ben Ramsey, Fabio Lima, Gonzalo Salgueiro, Martin Thomson, Murray S. Kucherawy, Rick van Rein, Rob Wilton, Sean Leonard, Theodore Y. Ts'o, Robert Kieffer, Sergey Prokhorenko, LiosK.¶
As well as all of those in the IETF community and on GitHub to who contributed to the discussions which resulted in this document.¶
This document draws heavily on the OSF DCE specification for UUIDs. Ted Ts'o provided helpful comments, especially on the byte ordering section which we mostly plagiarized from a proposed wording he supplied (all errors in that section are our responsibility, however).¶
We are also grateful to the careful reading and bit-twiddling of Ralf S. Engelschall, John Larmouth, and Paul Thorpe. Professor Larmouth was also invaluable in achieving coordination with ISO/IEC.¶
This appendix lists the name space IDs for some potentially interesting name spaces such those for [RFC8499] domain name system (DNS), [RFC1738] uniform resource locators (URLs), [X660] object identifiers (OIDs), and [X500] distinguished names (DNs).¶
NameSpace_DNS = "6ba7b810-9dad-11d1-80b4-00c04fd430c8" NameSpace_URL = "6ba7b811-9dad-11d1-80b4-00c04fd430c8" NameSpace_OID = "6ba7b812-9dad-11d1-80b4-00c04fd430c8" NameSpace_X500 = "6ba7b814-9dad-11d1-80b4-00c04fd430c8"¶
This appendix lists the hash space IDs for use with UUIDv8 name-based UUIDs.¶
SHA2_224 = "59031ca3-fbdb-47fb-9f6c-0f30e2e83145" SHA2_256 = "3fb32780-953c-4464-9cfd-e85dbbe9843d" SHA2_384 = "e6800581-f333-484b-8778-601ff2b58da8" SHA2_512 = "0fde22f2-e7ba-4fd1-9753-9c2ea88fa3f9" SHA2_512_224 = "003c2038-c4fe-4b95-a672-0c26c1b79542" SHA2_512_256 = "9475ad00-3769-4c07-9642-5e7383732306" SHA3_224 = "9768761f-ac5a-419e-a180-7ca239e8025a" SHA3_256 = "2034d66b-4047-4553-8f80-70e593176877" SHA3_384 = "872fb339-2636-4bdd-bda6-b6dc2a82b1b3" SHA3_512 = "a4920a5d-a8a6-426c-8d14-a6cafbe64c7b" SHAKE_128 = "7ea218f6-629a-425f-9f88-7439d63296bb" SHAKE_256 = "2e7fc6a4-2919-4edc-b0ba-7d7062ce4f0a"¶
Both UUIDv1 and UUIDv6 test vectors utilize the same 60 bit timestamp: 0x1EC9414C232AB00 (138648505420000000) Tuesday, February 22, 2022 2:22:22.000000 PM GMT-05:00¶
Both UUIDv1 and UUIDv6 utilize the same values in clock_seq, and node. All of which have been generated with random data.¶
The pseudocode used for converting from a 64 bit Unix timestamp to a 100ns Gregorian timestamp value has been left in the document for reference purposes.¶
The MD5 computation from is detailed in Figure 17 using the DNS NameSpace and the Name "www.example.com". while the field mapping and all values are illustrated in Figure 18. Finally to further illustrate the bit swapping for version and variant see Figure 19.¶
This UUIDv4 example was created by generating 16 bytes of random data resulting in the hexadecimal value of 919108F752D133205BACF847DB4148A8. This is then used to fill out the fields as shown in Figure 20.¶
Finally to further illustrate the bit swapping for version and variant see Figure 21.¶
The SHA-1 computation from is detailed in Figure 22 using the DNS NameSpace and the Name "www.example.com". while the field mapping and all values are illustrated in Figure 23. Finally to further illustrate the bit swapping for version and variant and the unused/discarded part of the SHA-1 value see Figure 24.¶
This example UUIDv7 test vector utilizes a well-known Unix epoch timestamp with millisecond precision to fill the first 48 bits.¶
rand_a and rand_b are filled with random data.¶
The timestamp is Tuesday, February 22, 2022 2:22:22.00 PM GMT-05:00 represented as 0x17F22E279B0 or 1645557742000¶
This example UUIDv8 test vector utilizes a well-known 64 bit Unix epoch timestamp with nanosecond precision, truncated to the least-significant, right-most, bits to fill the first 48 bits through version.¶
The next two segments of custom_b and custom_c are filled with random data.¶
Timestamp is Tuesday, February 22, 2022 2:22:22.000000 PM GMT-05:00 represented as 0x16D6320C3D4DCC00 or 1645557742000000000¶
It should be noted that this example is just to illustrate one scenario for UUIDv8. Test vectors will likely be implementation specific and vary greatly from this simple example.¶
A SHA-256 version of Appendix C.4 is detailed in Figure 28 to detail the usage of hash spaces Appendix B alongside namespace Appendix A and names. The field mapping and all values are illustrated in Figure 29. Finally to further illustrate the bit swapping for version and variant and the unused/discarded part of the SHA-256 value see Figure 30.¶