Network Working Group A. Davidson Internet-Draft Intended status: Informational A. Faz-Hernandez Expires: 25 August 2021 N. Sullivan C.A. Wood Cloudflare 21 February 2021 Oblivious Pseudorandom Functions (OPRFs) using Prime-Order Groups draft-irtf-cfrg-voprf-06 Abstract An Oblivious Pseudorandom Function (OPRF) is a two-party protocol for computing the output of a PRF. One party (the server) holds the PRF secret key, and the other (the client) holds the PRF input. The 'obliviousness' property ensures that the server does not learn anything about the client's input during the evaluation. The client should also not learn anything about the server's secret PRF key. Optionally, OPRFs can also satisfy a notion 'verifiability' (VOPRF). In this setting, the client can verify that the server's output is indeed the result of evaluating the underlying PRF with just a public key. This document specifies OPRF and VOPRF constructions instantiated within prime-order groups, including elliptic curves. Discussion Venues This note is to be removed before publishing as an RFC. Source for this draft and an issue tracker can be found at https://github.com/cfrg/draft-irtf-cfrg-voprf. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." Davidson, et al. Expires 25 August 2021 [Page 1] Internet-Draft OPRFs February 2021 This Internet-Draft will expire on 25 August 2021. Copyright Notice Copyright (c) 2021 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1. Change log . . . . . . . . . . . . . . . . . . . . . . . 4 1.2. Terminology . . . . . . . . . . . . . . . . . . . . . . . 6 1.3. Requirements . . . . . . . . . . . . . . . . . . . . . . 6 2. Preliminaries . . . . . . . . . . . . . . . . . . . . . . . . 6 2.1. Prime-Order Group Dependency . . . . . . . . . . . . . . 7 2.2. Other Conventions . . . . . . . . . . . . . . . . . . . . 8 3. OPRF Protocol . . . . . . . . . . . . . . . . . . . . . . . . 9 3.1. Overview . . . . . . . . . . . . . . . . . . . . . . . . 9 3.2. Context Setup . . . . . . . . . . . . . . . . . . . . . . 10 3.3. Data Types . . . . . . . . . . . . . . . . . . . . . . . 11 3.4. Context APIs . . . . . . . . . . . . . . . . . . . . . . 11 3.4.1. Server Context . . . . . . . . . . . . . . . . . . . 11 3.4.2. VerifiableServerContext . . . . . . . . . . . . . . . 13 3.4.3. Client Context . . . . . . . . . . . . . . . . . . . 18 3.4.4. VerifiableClientContext . . . . . . . . . . . . . . . 20 4. Domain Separation . . . . . . . . . . . . . . . . . . . . . . 23 5. Ciphersuites . . . . . . . . . . . . . . . . . . . . . . . . 23 5.1. OPRF(ristretto255, SHA-512) . . . . . . . . . . . . . . . 23 5.2. OPRF(decaf448, SHA-512) . . . . . . . . . . . . . . . . . 24 5.3. OPRF(P-256, SHA-256) . . . . . . . . . . . . . . . . . . 24 5.4. OPRF(P-384, SHA-512) . . . . . . . . . . . . . . . . . . 25 5.5. OPRF(P-521, SHA-512) . . . . . . . . . . . . . . . . . . 25 6. Security Considerations . . . . . . . . . . . . . . . . . . . 26 6.1. Security Properties . . . . . . . . . . . . . . . . . . . 26 6.2. Cryptographic Security . . . . . . . . . . . . . . . . . 27 6.2.1. Computational Hardness Assumptions . . . . . . . . . 27 6.2.2. Protocol Security . . . . . . . . . . . . . . . . . . 28 6.2.3. Q-Strong-DH Oracle . . . . . . . . . . . . . . . . . 28 6.2.4. Implications for Ciphersuite Choices . . . . . . . . 29 Davidson, et al. Expires 25 August 2021 [Page 2] Internet-Draft OPRFs February 2021 6.3. Hashing to Group . . . . . . . . . . . . . . . . . . . . 29 6.4. Timing Leaks . . . . . . . . . . . . . . . . . . . . . . 30 6.5. Key Rotation . . . . . . . . . . . . . . . . . . . . . . 30 7. Additive Blinding . . . . . . . . . . . . . . . . . . . . . . 30 7.1. Preprocess . . . . . . . . . . . . . . . . . . . . . . . 31 7.2. AdditiveBlind . . . . . . . . . . . . . . . . . . . . . . 31 7.3. AdditiveUnblind . . . . . . . . . . . . . . . . . . . . . 32 7.3.1. Parameter Commitments . . . . . . . . . . . . . . . . 33 8. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 33 9. References . . . . . . . . . . . . . . . . . . . . . . . . . 33 9.1. Normative References . . . . . . . . . . . . . . . . . . 33 9.2. Informative References . . . . . . . . . . . . . . . . . 35 Appendix A. Test Vectors . . . . . . . . . . . . . . . . . . . . 35 A.1. OPRF(ristretto255, SHA-512) . . . . . . . . . . . . . . . 36 A.1.1. Base Mode . . . . . . . . . . . . . . . . . . . . . . 36 A.1.2. Verifiable Mode . . . . . . . . . . . . . . . . . . . 36 A.2. OPRF(decaf448, SHA-512) . . . . . . . . . . . . . . . . . 38 A.2.1. Base Mode . . . . . . . . . . . . . . . . . . . . . . 38 A.2.2. Verifiable Mode . . . . . . . . . . . . . . . . . . . 39 A.3. OPRF(P-256, SHA-256) . . . . . . . . . . . . . . . . . . 40 A.3.1. Base Mode . . . . . . . . . . . . . . . . . . . . . . 40 A.3.2. Verifiable Mode . . . . . . . . . . . . . . . . . . . 41 A.4. OPRF(P-384, SHA-512) . . . . . . . . . . . . . . . . . . 42 A.4.1. Base Mode . . . . . . . . . . . . . . . . . . . . . . 42 A.4.2. Verifiable Mode . . . . . . . . . . . . . . . . . . . 43 A.5. OPRF(P-521, SHA-512) . . . . . . . . . . . . . . . . . . 45 A.5.1. Base Mode . . . . . . . . . . . . . . . . . . . . . . 45 A.5.2. Verifiable Mode . . . . . . . . . . . . . . . . . . . 46 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 48 1. Introduction A pseudorandom function (PRF) F(k, x) is an efficiently computable function taking a private key k and a value x as input. This function is pseudorandom if the keyed function K(_) = F(K, _) is indistinguishable from a randomly sampled function acting on the same domain and range as K(). An oblivious PRF (OPRF) is a two-party protocol between a server and a client, where the server holds a PRF key k and the client holds some input x. The protocol allows both parties to cooperate in computing F(k, x) such that: the client learns F(k, x) without learning anything about k; and the server does not learn anything about x or F(k, x). A Verifiable OPRF (VOPRF) is an OPRF wherein the server can prove to the client that F(k, x) was computed using the key k. The usage of OPRFs has been demonstrated in constructing a number of applications: password-protected secret sharing schemes [JKKX16]; privacy-preserving password stores [SJKS17]; and password- Davidson, et al. Expires 25 August 2021 [Page 3] Internet-Draft OPRFs February 2021 authenticated key exchange or PAKE [I-D.irtf-cfrg-opaque]. A VOPRF is necessary in some applications, e.g., the Privacy Pass protocol [I-D.davidson-pp-protocol], wherein this VOPRF is used to generate one-time authentication tokens to bypass CAPTCHA challenges. VOPRFs have also been used for password-protected secret sharing schemes e.g. [JKK14]. This document introduces an OPRF protocol built in prime-order groups, applying to finite fields of prime-order and also elliptic curve (EC) groups. The protocol has the option of being extended to a VOPRF with the addition of a NIZK proof for proving discrete log equality relations. This proof demonstrates correctness of the computation, using a known public key that serves as a commitment to the server's secret key. The document describes the protocol, the public-facing API, and its security properties. 1.1. Change log draft-06 (https://tools.ietf.org/html/draft-irtf-cfrg-voprf-06): * Specify of group element and scalar serialization. * Remove info parameter from the protocol API and update domain separation guidance. * Fold Unblind function into Finalize. * Optimize ComputeComposites for servers (using knowledge of the private key). * Specify deterministic key generation method. * Update test vectors. * Apply various editorial changes. draft-05 (https://tools.ietf.org/html/draft-irtf-cfrg-voprf-05): * Move to ristretto255 and decaf448 ciphersuites. * Clean up ciphersuite definitions. * Pin domain separation tag construction to draft version. * Move key generation outside of context construction functions. * Editorial changes. Davidson, et al. Expires 25 August 2021 [Page 4] Internet-Draft OPRFs February 2021 draft-04 (https://tools.ietf.org/html/draft-irtf-cfrg-voprf-04): * Introduce Client and Server contexts for controlling verifiability and required functionality. * Condense API. * Remove batching from standard functionality (included as an extension) * Add Curve25519 and P-256 ciphersuites for applications that prevent strong-DH oracle attacks. * Provide explicit prime-order group API and instantiation advice for each ciphersuite. * Proof-of-concept implementation in sage. * Remove privacy considerations advice as this depends on applications. draft-03 (https://tools.ietf.org/html/draft-irtf-cfrg-voprf-03): * Certify public key during VerifiableFinalize. * Remove protocol integration advice. * Add text discussing how to perform domain separation. * Drop OPRF_/VOPRF_ prefix from algorithm names. * Make prime-order group assumption explicit. * Changes to algorithms accepting batched inputs. * Changes to construction of batched DLEQ proofs. * Updated ciphersuites to be consistent with hash-to-curve and added OPRF specific ciphersuites. draft-02 (https://tools.ietf.org/html/draft-irtf-cfrg-voprf-02): * Added section discussing cryptographic security and static DH oracles. * Updated batched proof algorithms. draft-01 (https://tools.ietf.org/html/draft-irtf-cfrg-voprf-01): Davidson, et al. Expires 25 August 2021 [Page 5] Internet-Draft OPRFs February 2021 * Updated ciphersuites to be in line with https://tools.ietf.org/html/draft-irtf-cfrg-hash-to-curve-04. * Made some necessary modular reductions more explicit. 1.2. Terminology The following terms are used throughout this document. * PRF: Pseudorandom Function. * OPRF: Oblivious Pseudorandom Function. * VOPRF: Verifiable Oblivious Pseudorandom Function. * Client: Protocol initiator. Learns pseudorandom function evaluation as the output of the protocol. * Server: Computes the pseudorandom function over a secret key. Learns nothing about the client's input. * NIZK: Non-interactive zero knowledge. * DLEQ: Discrete Logarithm Equality. 1.3. Requirements The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 2. Preliminaries The (V)OPRF protocol in this document has two primary dependencies: * "GG": A prime-order group implementing the API described below in Section 2.1, with base point defined in the corresponding reference for each group. (See Section 5 for these base points.) * "Hash": A cryptographic hash function that is indifferentiable from a Random Oracle, whose output length is Nh bytes long. Section 5 specifies ciphersuites as combinations of "GG" and "Hash". Davidson, et al. Expires 25 August 2021 [Page 6] Internet-Draft OPRFs February 2021 2.1. Prime-Order Group Dependency In this document, we assume the construction of an additive, prime- order group "GG" for performing all mathematical operations. Such groups are uniquely determined by the choice of the prime "p" that defines the order of the group. We use "GF(p)" to represent the finite field of order "p". For the purpose of understanding and implementing this document, we take "GF(p)" to be equal to the set of integers defined by "{0, 1, ..., p-1}". The fundamental group operation is addition "+" with identity element "I". For any elements "A" and "B" of the group "GG", "A + B = B + A" is also a member of "GG". Also, for any "A" in "GG", there exists an element "-A" such that "A + (-A) = (-A) + A = I". Scalar multiplication is equivalent to the repeated application of the group operation on an element A with itself "r-1" times, this is denoted as "r*A = A + ... + A". For any element "A", "p*A=I". Scalar base multiplication is equivalent to the repeated application of the group operation on the base point with itself "r-1" times, this is denoted as "ScalarBaseMult(r)". The set of scalars corresponds to "GF(p)". We now detail a number of member functions that can be invoked on a prime-order group "GG". * Order(): Outputs the order of "GG" (i.e. "p"). * Identity(): Outputs the identity element of the group (i.e. "I"). * HashToGroup(x): A member function of "GG" that deterministically maps an array of bytes "x" to an element of "GG". The map must ensure that, for any adversary receiving "R = HashToGroup(x)", it is computationally difficult to reverse the mapping. Examples of hash to group functions satisfying this property are described for prime-order (sub)groups of elliptic curves, see [I-D.irtf-cfrg-hash-to-curve]. * HashToScalar(x): A member function of "GG" that deterministically maps an array of bytes "x" to an element in GF(p). A recommended method for its implementation is instantiating the hash to field function, defined in [I-D.irtf-cfrg-hash-to-curve] setting the target field to GF(p). * RandomScalar(): A member function of "GG" that chooses at random a non-zero element in GF(p). * SerializeElement(A): A member function of "GG" that maps a group element "A" to a unique byte array "buf" of fixed length "Ne". Davidson, et al. Expires 25 August 2021 [Page 7] Internet-Draft OPRFs February 2021 * DeserializeElement(buf): A member function of "GG" that maps a byte array "buf" to a group element "A", or fails if the input is not a valid byte representation of an element. * SerializeScalar(s): A member function of "GG" that maps a scalar element "s" to a unique byte array "buf" of fixed length "Ns". * DeserializeScalar(buf): A member function of "GG" that maps a byte array "buf" to a scalar "s", or fails if the input is not a valid byte representation of a scalar. Using the API of a prime-order group, we assume the existence of a function "GenerateKeyPair()" that generates a random private and public key pair ("skS", "pkS"). One possible implementation might be to compute "skS = RandomScalar()" and "pkS = ScalarBaseMult(skS)". We also assume the existence of a "DeriveKeyPair(seed)" function that deterministically generates a private and public key pair from input "seed", where "seed" is a random byte string that SHOULD have at least "Ns" bytes of entropy. "DeriveKeyPair(seed)" computes "skS = HashToScalar(seed)" and "pkS = ScalarBaseMult(skS)". It is convenient in cryptographic applications to instantiate such prime-order groups using elliptic curves, such as those detailed in [SEC2]. For some choices of elliptic curves (e.g. those detailed in [RFC7748], which require accounting for cofactors) there are some implementation issues that introduce inherent discrepancies between standard prime-order groups and the elliptic curve instantiation. In this document, all algorithms that we detail assume that the group is a prime-order group, and this MUST be upheld by any implementer. That is, any curve instantiation should be written such that any discrepancies with a prime-order group instantiation are removed. See Section 5 for advice corresponding to the implementation of this interface for specific definitions of elliptic curves. 2.2. Other Conventions * For any object "x", we write "len(x)" to denote its length in bytes. * For two byte arrays "x" and "y", write "x || y" to denote their concatenation. * I2OSP and OS2IP: Convert a byte array to and from a non-negative integer as described in [RFC8017]. Note that these functions operate on byte arrays in big-endian byte order. Davidson, et al. Expires 25 August 2021 [Page 8] Internet-Draft OPRFs February 2021 All algorithm descriptions are written in a Python-like pseudocode. We use the "ABORT()" function for presentational clarity to denote the process of terminating the algorithm or returning an error accordingly. We also use the "CT_EQUAL(a, b)" function to represent constant-time byte-wise equality between byte arrays "a" and "b". This function returns "true" if "a" and "b" are equal, and "false" otherwise. 3. OPRF Protocol In this section, we define two OPRF variants: a base mode and verifiable mode. In the base mode, a client and server interact to compute y = F(skS, x), where x is the client's input, skS is the server's private key, and y is the OPRF output. The client learns y and the server learns nothing. In the verifiable mode, the client also gets proof that the server used skS in computing the function. To achieve verifiability, as in the original work of [JKK14], we provide a zero-knowledge proof that the key provided as input by the server in the "Evaluate" function is the same key as it used to produce their public key. As an example of the nature of attacks that this prevents, this ensures that the server uses the same private key for computing the VOPRF output and does not attempt to "tag" individual servers with select keys. This proof must not reveal the server's long-term private key to the client. The following one-byte values distinguish between these two modes: +================+=======+ | Mode | Value | +================+=======+ | modeBase | 0x00 | +----------------+-------+ | modeVerifiable | 0x01 | +----------------+-------+ Table 1 3.1. Overview Both participants agree on the mode and a choice of ciphersuite that is used before the protocol exchange. Once established, the core protocol runs to compute "output = F(skS, input)" as follows: Davidson, et al. Expires 25 August 2021 [Page 9] Internet-Draft OPRFs February 2021 Client(pkS, input) Server(skS, pkS) ---------------------------------------------------------- blind, blindedElement = Blind(input) blindedElement ----------> evaluatedElement, proof = Evaluate(skS, pkS, blindedElement) evaluatedElement, proof <---------- output = Finalize(input, blind, evaluatedElement, blindedElement, pkS, proof) In "Blind" the client generates a token and blinding data. The server computes the (V)OPRF evaluation in "Evaluation" over the client's blinded token. In "Finalize" the client unblinds the server response, verifies the server's proof if verifiability is required, and produces a byte array corresponding to the output of the OPRF protocol. 3.2. Context Setup Both modes of the OPRF involve an offline setup phase. In this phase, both the client and server create a context used for executing the online phase of the protocol. Prior to this phase, the key pair ("skS", "pkS") should be generated by calling "GenerateKeyPair()" or "DeriveKeyPair()" appropriately. The base mode setup functions for creating client and server contexts are below: def SetupBaseServer(suite, skS): contextString = I2OSP(modeBase, 1) || I2OSP(suite.ID, 2) return ServerContext(contextString, skS) def SetupBaseClient(suite): contextString = I2OSP(modeBase, 1) || I2OSP(suite.ID, 2) return ClientContext(contextString) The verifiable mode setup functions for creating client and server contexts are below: Davidson, et al. Expires 25 August 2021 [Page 10] Internet-Draft OPRFs February 2021 def SetupVerifiableServer(suite, skS, pkS): contextString = I2OSP(modeVerifiable, 1) || I2OSP(suite.ID, 2) return VerifiableServerContext(contextString, skS) def SetupVerifiableClient(suite, pkS): contextString = I2OSP(modeVerifiable, 1) || I2OSP(suite.ID, 2) return VerifiableClientContext(contextString, pkS) Each setup function takes a ciphersuite from the list defined in Section 5. Each ciphersuite has a two-byte field ID used to identify the suite. 3.3. Data Types The following is a list of data structures that are defined for providing inputs and outputs for each of the context interfaces defined in Section 3.4. Data structure description uses TLS notation (see [RFC8446], Section 3). This document uses the types "Element" and "Scalar" to denote elements of the group "GG" and its underlying scalar field "GF(p)", respectively. For notational clarity, "PublicKey" is an item of type "Element" and "PrivateKey" is an item of type "Scalar". "SerializedElement" and "SerializedScalar" are serialized representations of "Element" and "Scalar" types of length "Ne" and "Ns", respectively; see Section 2.1. "ClientInput" is an opaque byte string of arbitrary length. "Proof" is a sequence of two "SerializedScalar" elements, as shown below. SerializedScalar Proof[2]; 3.4. Context APIs In this section, we detail the APIs available on the client and server (V)OPRF contexts. 3.4.1. Server Context The ServerContext encapsulates the context string constructed during setup and the (V)OPRF key pair. It has three functions, "Evaluate", "FullEvaluate" and "VerifyFinalize" described below. "Evaluate" takes serialized representations of blinded group elements from the client as inputs. "FullEvaluate" takes ClientInput values, and it is useful for applications that need to compute the whole OPRF protocol on the server side only. Davidson, et al. Expires 25 August 2021 [Page 11] Internet-Draft OPRFs February 2021 "VerifyFinalize" takes ClientInput values and their corresponding output digests from "Finalize" as input, and returns true if the inputs match the outputs. Note that "VerifyFinalize" and "FullEvaluate" are not used in the main OPRF protocol. They are exposed as an API for building higher- level protocols. 3.4.1.1. Evaluate Input: PrivateKey skS SerializedElement blindedElement Output: SerializedElement evaluatedElement def Evaluate(skS, blindedElement): R = GG.DeserializeElement(blindedElement) Z = skS * R evaluatedElement = GG.SerializeElement(Z) return evaluatedElement 3.4.1.2. FullEvaluate Input: PrivateKey skS ClientInput input Output: opaque output[Nh] def FullEvaluate(skS, input): P = GG.HashToGroup(input) T = skS * P issuedElement = GG.SerializeElement(T) finalizeDST = "VOPRF06-Finalize-" || self.contextString hashInput = I2OSP(len(input), 2) || input || I2OSP(len(issuedElement), 2) || issuedElement || I2OSP(len(finalizeDST), 2) || finalizeDST return Hash(hashInput) Davidson, et al. Expires 25 August 2021 [Page 12] Internet-Draft OPRFs February 2021 [[RFC editor: please change "VOPRF06" to "RFCXXXX", where XXXX is the final number, here and elsewhere before publication.]] 3.4.1.3. VerifyFinalize Input: PrivateKey skS ClientInput input opaque output[Nh] Output: boolean valid def VerifyFinalize(skS, input, output): T = GG.HashToGroup(input) element = GG.SerializeElement(T) issuedElement = Evaluate(skS, [element]) E = GG.SerializeElement(issuedElement) finalizeDST = "VOPRF06-Finalize-" || self.contextString hashInput = I2OSP(len(input), 2) || input || I2OSP(len(E), 2) || E || I2OSP(len(finalizeDST), 2) || finalizeDST digest = Hash(hashInput) return CT_EQUAL(digest, output) [[RFC editor: please change "VOPRF06" to "RFCXXXX", where XXXX is the final number, here and elsewhere before publication.]] 3.4.2. VerifiableServerContext The VerifiableServerContext extends the base ServerContext with an augmented "Evaluate()" function. This function produces a proof that "skS" was used in computing the result. It makes use of the helper functions "GenerateProof" and "ComputeComposites", described below. 3.4.2.1. Evaluate Davidson, et al. Expires 25 August 2021 [Page 13] Internet-Draft OPRFs February 2021 Input: PrivateKey skS PublicKey pkS SerializedElement blindedElement Output: SerializedElement evaluatedElement Proof proof def Evaluate(skS, pkS, blindedElement): R = GG.DeserializeElement(blindedElement) Z = skS * R evaluatedElement = GG.SerializeElement(Z) proof = GenerateProof(skS, pkS, blindedElement, evaluatedElement) return evaluatedElement, proof The helper functions "GenerateProof" and "ComputeComposites" are defined below. 3.4.2.2. GenerateProof Davidson, et al. Expires 25 August 2021 [Page 14] Internet-Draft OPRFs February 2021 Input: PrivateKey skS PublicKey pkS SerializedElement blindedElement SerializedElement evaluatedElement Output: Proof proof def GenerateProof(skS, pkS, blindedElement, evaluatedElement) blindedElementList = [blindedElement] evaluatedElementList = [evaluatedElement] a = ComputeCompositesFast(skS, pkS, blindedElementList, evaluatedElementList) M = GG.DeserializeElement(a[0]) r = GG.RandomScalar() a2 = GG.SerializeElement(ScalarBaseMult(r)) a3 = GG.SerializeElement(r * M) pkSm = GG.SerializeElement(pkS) challengeDST = "VOPRF06-Challenge-" || self.contextString h2Input = I2OSP(len(pkSm), 2) || pkSm || I2OSP(len(a[0]), 2) || a[0] || I2OSP(len(a[1]), 2) || a[1] || I2OSP(len(a2), 2) || a2 || I2OSP(len(a3), 2) || a3 || I2OSP(len(challengeDST), 2) || challengeDST c = GG.HashToScalar(h2Input) s = (r - c * skS) mod p proof = [GG.SerializeScalar(c), GG.SerializeScalar(s)] return proof 3.4.2.2.1. Batching inputs Unlike other functions, "ComputeComposites" takes lists of inputs, rather than a single input. Applications can take advantage of this functionality by invoking "GenerateProof" on batches of inputs to produce a combined, constant-size proof. (In the pseudocode above, the single inputs "blindedElement" and "evaluatedElement" are passed as one-item lists to "ComputeComposites".) Davidson, et al. Expires 25 August 2021 [Page 15] Internet-Draft OPRFs February 2021 In particular, servers can produce a single, constant-sized proof for N client inputs sent in a single request, rather than one proof per client input. This optimization benefits clients and servers since it amortizes the cost of proof generation and bandwidth across multiple requests. 3.4.2.2.2. Fresh Randomness We note here that it is essential that a different "r" value is used for every invocation. If this is not done, then this may leak "skS" as is possible in Schnorr or (EC)DSA scenarios where fresh randomness is not used. 3.4.2.3. ComputeComposites The definition of "ComputeComposites" is given below. This function is used both on generation and verification of the proof. Davidson, et al. Expires 25 August 2021 [Page 16] Internet-Draft OPRFs February 2021 Input: PublicKey pkS SerializedElement blindedElements[m] SerializedElement evaluatedElements[m] Output: SerializedElement composites[2] def ComputeComposites(pkS, blindedElements, evaluatedElements): pkSm = GG.SerializeElement(pkS) seedDST = "VOPRF06-Seed-" || self.contextString compositeDST = "VOPRF06-Composite-" || self.contextString h1Input = I2OSP(len(pkSm), 2) || pkSm || I2OSP(len(seedDST), 2) || seedDST seed = Hash(h1Input) M = GG.Identity() Z = GG.Identity() for i = 0 to m-1: h2Input = I2OSP(len(seed), 2) || seed || I2OSP(i, 2) || I2OSP(len(blindedElements[i]), 2) || blindedElements[i] || I2OSP(len(evaluatedElements[i]), 2) || evaluatedElements[i] || I2OSP(len(compositeDST), 2) || compositeDST di = GG.HashToScalar(h2Input) Mi = GG.DeserializeElement(blindedElements[i]) M = di * Mi + M Zi = GG.DeserializeElement(evaluatedElements[i]) Z = di * Zi + Z return [GG.SerializeElement(M), GG.SerializeElement(Z)] If the private key is known, as is the case for the server, this function can be optimized as shown in "ComputeCompositesFast" below. Davidson, et al. Expires 25 August 2021 [Page 17] Internet-Draft OPRFs February 2021 Input: PrivateKey skS PublicKey pkS SerializedElement blindedElements[m] SerializedElement evaluatedElements[m] Output: SerializedElement composites[2] def ComputeCompositesFast(skS, pkS, blindedElements, evaluatedElements): pkSm = GG.SerializeElement(pkS) seedDST = "VOPRF06-Seed-" || self.contextString compositeDST = "VOPRF06-Composite-" || self.contextString h1Input = I2OSP(len(pkSm), 2) || pkSm || I2OSP(len(seedDST), 2) || seedDST seed = Hash(h1Input) M = GG.Identity() for i = 0 to m-1: h2Input = I2OSP(len(seed), 2) || seed || I2OSP(i, 2) || I2OSP(len(blindedElements[i]), 2) || blindedElements[i] || I2OSP(len(evaluatedElements[i]), 2) || evaluatedElements[i] || I2OSP(len(compositeDST), 2) || compositeDST di = GG.HashToScalar(h2Input) Mi = GG.DeserializeElement(blindedElements[i]) M = di * Mi + M Z = skS * M return [GG.SerializeElement(M), GG.SerializeElement(Z)] 3.4.3. Client Context The ClientContext encapsulates the context string constructed during setup. It has two functions, "Blind()" and "Finalize()", as described below. It also has an internal function, "Unblind()", which is used by "Finalize". Its implementation varies depending on the mode. 3.4.3.1. Blind We note here that the blinding mechanism that we use can be modified slightly with the opportunity for making performance gains in some scenarios. We detail these modifications in Section 7. Davidson, et al. Expires 25 August 2021 [Page 18] Internet-Draft OPRFs February 2021 Input: ClientInput input Output: Scalar blind SerializedElement blindedElement def Blind(input): blind = GG.RandomScalar() P = GG.HashToGroup(input) blindedElement = GG.SerializeElement(blind * P) return blind, blindedElement 3.4.3.2. Unblind In this mode, "Unblind" takes only two inputs. The additional inputs indicated in Section 3.1 are only omitted as they are ignored. These additional inputs are only useful for the verifiable mode, described in Section 3.4.4.2. Input: Scalar blind SerializedElement evaluatedElement Output: SerializedElement unblindedElement def Unblind(blind, evaluatedElement, ...): Z = GG.DeserializeElement(evaluatedElement) N = (blind^(-1)) * Z unblindedElement = GG.SerializeElement(N) return unblindedElement 3.4.3.3. Finalize "Finalize" depends on the internal "Unblind" function. In this mode, "Finalize" and does not include all inputs listed in Section 3.1. These additional inputs are only useful for the verifiable mode, described in Section 3.4.4.2. Davidson, et al. Expires 25 August 2021 [Page 19] Internet-Draft OPRFs February 2021 Input: ClientInput input Scalar blind SerializedElement evaluatedElement Output: opaque output[Nh] def Finalize(input, blind, evaluatedElement): unblindedElement = Unblind(blind, evaluatedElement) finalizeDST = "VOPRF06-Finalize-" || self.contextString hashInput = I2OSP(len(input), 2) || input || I2OSP(len(unblindedElement), 2) || unblindedElement || I2OSP(len(finalizeDST), 2) || finalizeDST return Hash(hashInput) 3.4.4. VerifiableClientContext The VerifiableClientContext extends the base ClientContext with the desired server public key "pkS" with an augmented "Unblind()" function. This function verifies an evaluation proof using "pkS". It makes use of the helper function "ComputeComposites" described above. It has one helper function, "VerifyProof()", defined below. 3.4.4.1. VerifyProof This algorithm outputs a boolean "verified" which indicates whether the proof inside of the evaluation verifies correctly, or not. Davidson, et al. Expires 25 August 2021 [Page 20] Internet-Draft OPRFs February 2021 Input: PublicKey pkS SerializedElement blindedElement SerializedElement evaluatedElement Proof proof Output: boolean verified def VerifyProof(pkS, blindedElement, evaluatedElement, proof): blindedElementList = [blindedElement] evaluatedElementList = [evaluatedElement] a = ComputeComposites(pkS, blindedElementList, evaluatedElementList) c = GG.DeserializeScalar(proof[0]) s = GG.DeserializeScalar(proof[1]) M = GG.DeserializeElement(a[0]) Z = GG.DeserializeElement(a[1]) A' = (ScalarBaseMult(s) + c * pkS) B' = (s * M + c * Z) a2 = GG.SerializeElement(A') a3 = GG.SerializeElement(B') challengeDST = "VOPRF06-Challenge-" || self.contextString h2Input = I2OSP(len(pkS), 2) || pkS || I2OSP(len(a[0]), 2) || a[0] || I2OSP(len(a[1]), 2) || a[1] || I2OSP(len(a2), 2) || a2 || I2OSP(len(a3), 2) || a3 || I2OSP(len(challengeDST), 2) || challengeDST expected_c = GG.HashToScalar(h2Input) return CT_EQUAL(expected_c, c) 3.4.4.2. Verifiable Unblind Davidson, et al. Expires 25 August 2021 [Page 21] Internet-Draft OPRFs February 2021 Input: Scalar blind SerializedElement evaluatedElement SerializedElement blindedElement PublicKey pkS Scalar proof Output: SerializedElement unblindedElement def Unblind(blind, evaluatedElement, blindedElement, pkS, proof): if VerifyProof(pkS, blindedElement, evaluatedElement, proof) == false: ABORT() Z = GG.DeserializeElement(evaluatedElement) N = (blind^(-1)) * Z unblindedElement = GG.SerializeElement(N) return unblindedElement 3.4.4.3. Verifiable Finalize Input: ClientInput input Scalar blind SerializedElement evaluatedElement SerializedElement blindedElement PublicKey pkS Scalar proof Output: SerializedElement unblindedElement def Finalize(input, blind, evaluatedElement, blindedElement, pkS, proof): unblindedElement = Unblind(blind, evaluatedElement, blindedElement, pkS, proof) finalizeDST = "VOPRF06-Finalize-" || self.contextString hashInput = I2OSP(len(input), 2) || input || I2OSP(len(unblindedElement), 2) || unblindedElement || I2OSP(len(finalizeDST), 2) || finalizeDST return Hash(hashInput) Davidson, et al. Expires 25 August 2021 [Page 22] Internet-Draft OPRFs February 2021 4. Domain Separation Applications SHOULD construct input to the protocol to provide domain separation. Any system which has multiple (V)OPRF applications should distinguish client inputs to ensure the OPRF results are separate. Guidance for constructing info can be found in [I-D.irtf-cfrg-hash-to-curve]; Section 3.1. 5. Ciphersuites A ciphersuite (also referred to as 'suite' in this document) for the protocol wraps the functionality required for the protocol to take place. This ciphersuite should be available to both the client and server, and agreement on the specific instantiation is assumed throughout. A ciphersuite contains instantiations of the following functionalities: * "GG": A prime-order group exposing the API detailed in Section 2.1, with base point defined in the corresponding reference for each group. Each group also specifies HashToGroup, HashToScalar, and serialization functionalities. For HashToGroup, the domain separation tag (DST) is constructed in accordance with the recommendations in [I-D.irtf-cfrg-hash-to-curve], Section 3.1. * "Hash": A cryptographic hash function that is indifferentiable from a Random Oracle, whose output length is Nh bytes long. This section specifies ciphersuites with supported groups and hash functions. For each ciphersuite, contextString is that which is computed in the Setup functions. Applications should take caution in using ciphersuites targeting P-256 and ristretto255. See Section 6.2 for related discussion. 5.1. OPRF(ristretto255, SHA-512) * Group: ristretto255 [RISTRETTO] - HashToGroup(): Use hash_to_ristretto255 [I-D.irtf-cfrg-hash-to-curve] with DST = "VOPRF06-HashToGroup-" || contextString, and "expand_message" = "expand_message_xmd" using SHA-512. - HashToScalar(): Compute "uniform_bytes" using "expand_message" = "expand_message_xmd", DST = "VOPRF06-HashToScalar-" || contextString, and output length 64, interpret "uniform_bytes" as a 512-bit integer in little-endian order, and reduce the integer modulo "Order()". Davidson, et al. Expires 25 August 2021 [Page 23] Internet-Draft OPRFs February 2021 - Serialization: Both group elements and scalars are encoded in Ne = Ns = 32 bytes. For group elements, use the 'Encode' and 'Decode' functions from [RISTRETTO]. For scalars, ensure they are fully reduced modulo p and in little-endian order. * Hash: SHA-512, and Nh = 64. * ID: 0x0001 5.2. OPRF(decaf448, SHA-512) * Group: decaf448 [RISTRETTO] - HashToGroup(): Use hash_to_decaf448 [I-D.irtf-cfrg-hash-to-curve] with DST = "VOPRF06-HashToGroup-" || contextString, and "expand_message" = "expand_message_xmd" using SHA-512. - HashToScalar(): Compute "uniform_bytes" using "expand_message" = "expand_message_xmd", DST = "VOPRF06-HashToScalar-" || contextString, and output length 64, interpret "uniform_bytes" as a 512-bit integer in little-endian order, and reduce the integer modulo "Order()". - Serialization: Both group elements and scalars are encoded in Ne = Ns = 56 bytes. For group elements, use the 'Encode' and 'Decode' functions from [RISTRETTO]. For scalars, ensure they are fully reduced modulo p and in little-endian order. * Hash: SHA-512, and Nh = 64. * ID: 0x0002 5.3. OPRF(P-256, SHA-256) * Group: P-256 (secp256r1) [x9.62] - HashToGroup(): Use hash_to_curve with suite P256_XMD:SHA- 256_SSWU_RO_ [I-D.irtf-cfrg-hash-to-curve] and DST = "VOPRF06-HashToGroup-" || contextString. - HashToScalar(): Use hash_to_field from [I-D.irtf-cfrg-hash-to-curve] using Order() as the prime modulus, L = 48, "expand_message_xmd" with SHA-256, and DST = "VOPRF06-HashToScalar-" || contextString. Davidson, et al. Expires 25 August 2021 [Page 24] Internet-Draft OPRFs February 2021 - Serialization: Elements are serialized as Ne = 33 byte strings using compressed point encoding for the curve [SEC1]. Scalars are serialized as Ns = 32 byte strings by fully reducing the value modulo p and in big-endian order. * Hash: SHA-256, and Nh = 32. * ID: 0x0003 5.4. OPRF(P-384, SHA-512) * Group: P-384 (secp384r1) [x9.62] - HashToGroup(): Use hash_to_curve with suite P384_XMD:SHA- 512_SSWU_RO_ [I-D.irtf-cfrg-hash-to-curve] and DST = "VOPRF06-HashToGroup-" || contextString. - HashToScalar(): Use hash_to_field from [I-D.irtf-cfrg-hash-to-curve] using Order() as the prime modulus, L = 72, "expand_message_xmd" with SHA-512, and DST = "VOPRF06-HashToScalar-" || contextString. - Serialization: Elements are serialized as Ne = 49 byte strings using compressed point encoding for the curve [SEC1]. Scalars are serialized as Ns = 48 byte strings by fully reducing the value modulo p and in big-endian order. * Hash: SHA-512, and Nh = 64. * ID: 0x0004 5.5. OPRF(P-521, SHA-512) * Group: P-521 (secp521r1) [x9.62] - HashToGroup(): Use hash_to_curve with suite P521_XMD:SHA- 512_SSWU_RO_ [I-D.irtf-cfrg-hash-to-curve] and DST = "VOPRF06-HashToGroup-" || contextString. - HashToScalar(): Use hash_to_field from [I-D.irtf-cfrg-hash-to-curve] using Order() as the prime modulus, L = 98, "expand_message_xmd" with SHA-512, and DST = "VOPRF06-HashToScalar-" || contextString. - Serialization: Elements are serialized as Ne = 67 byte strings using compressed point encoding for the curve [SEC1]. Scalars are serialized as Ns = 66 byte strings by fully reducing the value modulo p and in big-endian order. Davidson, et al. Expires 25 August 2021 [Page 25] Internet-Draft OPRFs February 2021 * Hash: SHA-512, and Nh = 64. * ID: 0x0005 6. Security Considerations This section discusses the cryptographic security of our protocol, along with some suggestions and trade-offs that arise from the implementation of an OPRF. 6.1. Security Properties The security properties of an OPRF protocol with functionality y = F(k, x) include those of a standard PRF. Specifically: * Pseudorandomness: F is pseudorandom if the output y = F(k,x) on any input x is indistinguishable from uniformly sampling any element in F's range, for a random sampling of k. In other words, consider an adversary that picks inputs x from the domain of F and evaluates F on (k,x) (without knowledge of randomly sampled k). Then the output distribution F(k,x) is indistinguishable from the output distribution of a randomly chosen function with the same domain and range. A consequence of showing that a function is pseudorandom, is that it is necessarily non-malleable (i.e. we cannot compute a new evaluation of F from an existing evaluation). A genuinely random function will be non-malleable with high probability, and so a pseudorandom function must be non-malleable to maintain indistinguishability. An OPRF protocol must also satisfy the following property: * Oblivious: The server must learn nothing about the client's input or the output of the function. In addition, the client must learn nothing about the server's private key. Essentially, obliviousness tells us that, even if the server learns the client's input x at some point in the future, then the server will not be able to link any particular OPRF evaluation to x. This property is also known as unlinkability [DGSTV18]. Optionally, for any protocol that satisfies the above properties, there is an additional security property: Davidson, et al. Expires 25 August 2021 [Page 26] Internet-Draft OPRFs February 2021 * Verifiable: The client must only complete execution of the protocol if it can successfully assert that the OPRF output it computes is correct. This is taken with respect to the OPRF key held by the server. Any OPRF that satisfies the 'verifiable' security property is known as a verifiable OPRF, or VOPRF for short. In practice, the notion of verifiability requires that the server commits to the key before the actual protocol execution takes place. Then the client verifies that the server has used the key in the protocol using this commitment. In the following, we may also refer to this commitment as a public key. 6.2. Cryptographic Security Below, we discuss the cryptographic security of the (V)OPRF protocol from Section 3, relative to the necessary cryptographic assumptions that need to be made. 6.2.1. Computational Hardness Assumptions Each assumption states that the problems specified below are computationally difficult to solve in relation to a particular choice of security parameter "sp". Let GG = GG(sp) be a group with prime-order p, and let GF(p) be a finite field of order p. 6.2.1.1. Discrete-log (DL) Problem Given G, a generator of GG, and H = hG for some h in GF(p); output h. 6.2.1.2. Decisional Diffie-Hellman (DDH) Problem Sample uniformly at random d in {0,1}. Given (G, aG, bG, C), where * G is a generator of GG; * a,b are elements of GF(p); * if d == 0: C = abG; else: C is sampled uniformly at random from GG. Output d' == d. Davidson, et al. Expires 25 August 2021 [Page 27] Internet-Draft OPRFs February 2021 6.2.2. Protocol Security Our OPRF construction is based on the VOPRF construction known as 2HashDH-NIZK given by [JKK14]; essentially without providing zero- knowledge proofs that verify that the output is correct. Our VOPRF construction is identical to the [JKK14] construction, except that we can optionally perform multiple VOPRF evaluations in one go, whilst only constructing one NIZK proof object. This is enabled using an established batching technique. Consequently, the cryptographic security of our construction is based on the assumption that the One-More Gap DH is computationally difficult to solve. The (N,Q)-One-More Gap DH (OMDH) problem asks the following. Given: - G, k * G, and (G_1, ... , G_N), all elements of GG; - oracle access to an OPRF functionality using the key k; - oracle access to DDH solvers. Find Q+1 pairs of the form below: (G_{j_s}, k * G_{j_s}) where the following conditions hold: - s is a number between 1 and Q+1; - j_s is a number between 1 and N for each s; - Q is the number of allowed queries. The original paper [JKK14] gives a security proof that the 2HashDH- NIZK construction satisfies the security guarantees of a VOPRF protocol Section 6.1 under the OMDH assumption in the universal composability (UC) security model. 6.2.3. Q-Strong-DH Oracle A side-effect of our OPRF design is that it allows instantiation of a oracle for constructing Q-strong-DH (Q-sDH) samples. The Q-Strong-DH problem asks the following. Given G1, G2, h*G2, (h^2)*G2, ..., (h^Q)*G2; for G1 and G2 generators of GG. Output ( (1/(k+c))*G1, c ) where c is an element of GF(p) Davidson, et al. Expires 25 August 2021 [Page 28] Internet-Draft OPRFs February 2021 The assumption that this problem is hard was first introduced in [BB04]. Since then, there have been a number of cryptanalytic studies that have reduced the security of the assumption below that implied by the group instantiation (for example, [BG04] and [Cheon06]). In summary, the attacks reduce the security of the group instantiation by log_2(Q) bits. As an example, suppose that a group instantiation is used that provides 128 bits of security against discrete log cryptanalysis. Then an adversary with access to a Q-sDH oracle and makes Q=2^20 queries can reduce the security of the instantiation by log_2(2^20) = 20 bits. Notice that it is easy to instantiate a Q-sDH oracle using the OPRF functionality that we provide. A client can just submit sequential queries of the form (G, k * G, (k^2)G, ..., (k^(Q-1))G), where each query is the output of the previous interaction. This means that any client that submits Q queries to the OPRF can use the aforementioned attacks to reduce the security of the group instantiation by log_2(Q) bits. Recall that from a malicious client's perspective, the adversary wins if they can distinguish the OPRF interaction from a protocol that computes the ideal functionality provided by the PRF. 6.2.4. Implications for Ciphersuite Choices The OPRF instantiations that we recommend in this document are informed by the cryptanalytic discussion above. In particular, choosing elliptic curves configurations that describe 128-bit group instantiations would appear to in fact instantiate an OPRF with 128-log_2(Q) bits of security. In most cases, it would require an informed and persistent attacker to launch a highly expensive attack to reduce security to anything much below 100 bits of security. We see this possibility as something that may result in problems in the future. For applications that cannot tolerate discrete logarithm security of lower than 128 bits, we recommend only implementing ciphersuites with IDs: 0x0002, 0x0004, and 0x0005. 6.3. Hashing to Group A critical requirement of implementing the prime-order group using elliptic curves is a method to instantiate the function "GG.HashToGroup", that maps inputs to group elements. In the elliptic curve setting, this deterministically maps inputs x (as byte arrays) to uniformly chosen points on the curve. Davidson, et al. Expires 25 August 2021 [Page 29] Internet-Draft OPRFs February 2021 In the security proof of the construction Hash is modeled as a random oracle. This implies that any instantiation of "GG.HashToGroup" must be pre-image and collision resistant. In Section 5 we give instantiations of this functionality based on the functions described in [I-D.irtf-cfrg-hash-to-curve]. Consequently, any OPRF implementation must adhere to the implementation and security considerations discussed in [I-D.irtf-cfrg-hash-to-curve] when instantiating the function. 6.4. Timing Leaks To ensure no information is leaked during protocol execution, all operations that use secret data MUST run in constant time. Operations that SHOULD run in constant time include all prime-order group operations and proof-specific operations ("GenerateProof()" and "VerifyProof()"). 6.5. Key Rotation Since the server's key is critical to security, the longer it is exposed by performing (V)OPRF operations on client inputs, the longer it is possible that the key can be compromised. For example, if the key is kept in circulation for a long period of time, then it also allows the clients to make enough queries to launch more powerful variants of the Q-sDH attacks from Section 6.2.3. To combat attacks of this nature, regular key rotation should be employed on the server-side. A suitable key-cycle for a key used to compute (V)OPRF evaluations would be between one week and six months. 7. Additive Blinding Let "H" refer to the function "GG.HashToGroup", in Section 2.1 we assume that the client-side blinding is carried out directly on the output of "H(x)", i.e. computing "r * H(x)" for some "r" sampled uniformly at random from "GF(p)". In the [I-D.irtf-cfrg-opaque] document, it is noted that it may be more efficient to use additive blinding (rather than multiplicative) if the client can preprocess some values. For example, a valid way of computing additive blinding would be to instead compute "H(x) + (r * G)", where "G" is the fixed generator for the group "GG". The advantage of additive blinding is that it allows the client to pre-process tables of blinded scalar multiplications for "G". This may give it a computational efficiency advantage (due to the fact that a fixed-base multiplication can be calculated faster than a variable-base multiplication). Pre-processing also reduces the amount of computation that needs to be done in the online exchange. Davidson, et al. Expires 25 August 2021 [Page 30] Internet-Draft OPRFs February 2021 Choosing one of these values "r * G" (where "r" is the scalar value that is used), then computing "H(x) + (r * G)" is more efficient than computing "r * H(x)". Therefore, it may be advantageous to define the OPRF and VOPRF protocols using additive (rather than multiplicative) blinding. In fact, the only algorithms that need to change are "Blind" and "Unblind" (and similarly for the VOPRF variants). We define the variants of the algorithms in Section 3.4 for performing additive blinding below, called "AdditiveBlind" and "AdditiveUnblind", along with a new algorithm "Preprocess". The "Preprocess" algorithm can take place offline and before the rest of the OPRF protocol. "AdditiveBlind" takes the preprocessed values as inputs. "AdditiveUnblind" takes the preprocessed values and evaluated element from the server as inputs. 7.1. Preprocess Input: PublicKey pkS Output: Element blindedGenerator Element blindedPublicKey def Preprocess(pkS): blind = GG.RandomScalar() blindedGenerator = ScalarBaseMult(blind) blindedPublicKey = blind * pkS return blindedGenerator, blindedPublicKey 7.2. AdditiveBlind Davidson, et al. Expires 25 August 2021 [Page 31] Internet-Draft OPRFs February 2021 Input: ClientInput input Element blindedGenerator Output: SerializedElement blindedElement def AdditiveBlind(input, blindedGenerator): P = GG.HashToGroup(input) blindedElement = GG.SerializeElement(P + blindedGenerator) /* P + ScalarBaseMult(r) */ return blindedElement 7.3. AdditiveUnblind Input: Element blindedPublicKey SerializedElement evaluatedElement Output: SerializedElement unblindedElement def AdditiveUnblind(blindedPublicKey, evaluatedElement): Z = GG.DeserializeElement(evaluatedElement) N := Z - blindedPublicKey unblindedElement = GG.SerializeElement(N) return unblindedElement Let "P = GG.HashToGroup(input)". Notice that AdditiveUnblind computes: Z - blindedPublicKey = k * (P + r * G) - r * pkS = k * P + k * (r * G) - r * (k * G) = k * P by the commutativity of the scalar field. This is the same output as in the "Unblind" algorithm for multiplicative blinding. Note that the verifiable variant of "AdditiveUnblind" works as above but includes the step to "VerifyProof", as specified in Section 3.4.4. Davidson, et al. Expires 25 August 2021 [Page 32] Internet-Draft OPRFs February 2021 7.3.1. Parameter Commitments For some applications, it may be desirable for the server to bind tokens to certain parameters, e.g., protocol versions, ciphersuites, etc. To accomplish this, the server should use a distinct scalar for each parameter combination. Upon redemption of a token T from the client, the server can later verify that T was generated using the scalar associated with the corresponding parameters. 8. Acknowledgements This document resulted from the work of the Privacy Pass team [PrivacyPass]. The authors would also like to acknowledge helpful conversations with Hugo Krawczyk. Eli-Shaoul Khedouri provided additional review and comments on key consistency. Daniel Bourdrez, Tatiana Bradley, Sofia Celi, Frank Denis, and Bas Westerbaan also provided helpful input and contributions to the document. 9. References 9.1. Normative References [BB04] "Short Signatures Without Random Oracles", . [BG04] "The Static Diffie-Hellman Problem", . [Cheon06] "Security Analysis of the Strong Diffie-Hellman Problem", . [DGSTV18] "Privacy Pass, Bypassing Internet Challenges Anonymously", . [I-D.davidson-pp-protocol] Davidson, A., "Privacy Pass: The Protocol", Work in Progress, Internet-Draft, draft-davidson-pp-protocol-01, 13 July 2020, . [I-D.irtf-cfrg-hash-to-curve] Faz-Hernandez, A., Scott, S., Sullivan, N., Wahby, R., and C. Wood, "Hashing to Elliptic Curves", Work in Progress, Internet-Draft, draft-irtf-cfrg-hash-to-curve-10, 11 October 2020, . Davidson, et al. Expires 25 August 2021 [Page 33] Internet-Draft OPRFs February 2021 [I-D.irtf-cfrg-opaque] Krawczyk, H., Lewi, K., and C. Wood, "The OPAQUE Asymmetric PAKE Protocol", Work in Progress, Internet- Draft, draft-irtf-cfrg-opaque-01, 2 November 2020, . [JKK14] "Round-Optimal Password-Protected Secret Sharing and T-PAKE in the Password-Only model", . [JKKX16] "Highly-Efficient and Composable Password-Protected Secret Sharing (Or, How to Protect Your Bitcoin Wallet Online)", . [PrivacyPass] "Privacy Pass", . [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC7748] Langley, A., Hamburg, M., and S. Turner, "Elliptic Curves for Security", RFC 7748, DOI 10.17487/RFC7748, January 2016, . [RFC8017] Moriarty, K., Ed., Kaliski, B., Jonsson, J., and A. Rusch, "PKCS #1: RSA Cryptography Specifications Version 2.2", RFC 8017, DOI 10.17487/RFC8017, November 2016, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RISTRETTO] Valence, H., Grigg, J., Tankersley, G., Valsorda, F., Lovecruft, I., and M. Hamburg, "The ristretto255 and decaf448 Groups", Work in Progress, Internet-Draft, draft- irtf-cfrg-ristretto255-decaf448-00, 5 October 2020, . [SEC1] Standards for Efficient Cryptography Group (SECG), ., "SEC 1: Elliptic Curve Cryptography", . Davidson, et al. Expires 25 August 2021 [Page 34] Internet-Draft OPRFs February 2021 [SEC2] Standards for Efficient Cryptography Group (SECG), ., "SEC 2: Recommended Elliptic Curve Domain Parameters", . [SJKS17] "SPHINX, A Password Store that Perfectly Hides from Itself", . [x9.62] ANSI, "Public Key Cryptography for the Financial Services Industry: the Elliptic Curve Digital Signature Algorithm (ECDSA)", ANSI X9.62-1998, September 1998. 9.2. Informative References [RFC8446] Rescorla, E., "The Transport Layer Security (TLS) Protocol Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018, . Appendix A. Test Vectors This section includes test vectors for the (V)OPRF protocol specified in this document. For each ciphersuite specified in Section 5, there is a set of test vectors for the protocol when run in the base mode and verifiable mode. Each test vector lists the batch size for the evaluation. Each test vector value is encoded as a hexadecimal byte string. The label for each test vector value is described below. * "Input": The client input, an opaque byte string. * "Blind": The blind value output by "Blind()", a serialized "Scalar" of "Ns" bytes long. * "BlindedElement": The blinded value output by "Blind()", a serialized "Element" of "Ne" bytes long. * "EvaluatedElement": The evaluated element output by "Evaluate()", a serialized "Element" of "Ne" bytes long. * "EvaluationProofC": The "c" component of the Evaluation proof (only listed for verifiable mode test vectors), a serialized "Scalar" of "Ns" bytes long. * "EvaluationProofS": The "s" component of the Evaluation proof (only listed for verifiable mode test vectors), a serialized "Scalar" of "Ns" bytes long. * "Output": The OPRF output, a byte string of length "Nh" bytes. Davidson, et al. Expires 25 August 2021 [Page 35] Internet-Draft OPRFs February 2021 Test vectors with batch size B > 1 have inputs separated by a comma ",". Applicable test vectors will have B different values for the "Input", "Blind", "BlindedElement", "EvaluationElement", and "Output" fields. The server key material, "pkSm" and "skSm", are listed under the mode for each ciphersuite. Both "pkSm" and "skSm" are the serialized values of "pkS" and "skS", respectively, as used in the protocol. Each key pair is derived from a "seed", which is listed as well. A.1. OPRF(ristretto255, SHA-512) A.1.1. Base Mode seed = aca1ae53bec831a1279b75ec6091b23d28034b59f77abeb0fa8f6d1a01340 234 skSm = 758cbac0e1eb4265d80f6e6489d9a74d788f7ddeda67d7fb3c08b08f44bda 30a A.1.1.1. Test Vector 1, Batch Size 1 Input = 00 Blind = c604c785ada70d77a5256ae21767de8c3304115237d262134f5e46e512cf 8e03 BlindedElement = 3c7f2d901c0d4f245503a186086fbdf5d8b4408432b25c5163e 8b5a19c258348 EvaluationElement = fc6c2b854553bf1ed6674072ed0bde1a9911e02b4bd64aa0 2cfb428f30251e77 Output = d8ed12382086c74564ae19b7a2b5ed9bdc52656d1fc151faaae51aaba86 291e8df0b2143a92f24d44d5efd0892e2e26721d27d88745343493634a66d3a925e3 a A.1.1.2. Test Vector 2, Batch Size 1 Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a Blind = 5ed895206bfc53316d307b23e46ecc6623afb3086da74189a416012be037 e50b BlindedElement = 28a5e797b710f76d20a52507145fbf320a574ec2c8ab0e33e65 dd2c277d0ee56 EvaluationElement = 345e140b707257ae83d4911f7ead3177891e7a62c5409773 2802c4c7a98ab25a Output = 4d5f4221b5ebfd4d1a9dd54830e1ed0bce5a8f30a792723a6fddfe6cfe9 f86bb1d95a3725818aeb725eb0b1b52e01ee9a72f47042372ef66c307770054d674f c A.1.2. Verifiable Mode Davidson, et al. Expires 25 August 2021 [Page 36] Internet-Draft OPRFs February 2021 seed = 23ad84086377ae0ac20acfcf143a9b5c34be63758b94f7ed0a8485345a748 431 skSm = 8d30b6ed995e28692f9ae5517ad4d974395605fd31cbe65b47f88822a142e d05 pkSm = c447ae83e5ea5a070c3b35ca0926460020378fd48402b54a7ba2e36b48011 f0c A.1.2.1. Test Vector 1, Batch Size 1 Input = 00 Blind = ed8366feb6b1d05d1f46acb727061e43aadfafe9c10e5a64e7518d63e326 3503 BlindedElement = 9cf00acd9be7d00b87012823aec2480afac98468fc7e0766e52 c2c42eb66802a EvaluationElement = a0a6cbd69a6c3c84bf84ae2b2178debe5ca2d7de8c0c3439 e340f503e87f9b65 EvaluationProofC = 4c1e61ab430c2026b14dbe2df62d64bf5b76001edc0ac5e84 b0b50b09977da05 EvaluationProofS = 490660d2a0974c09ab13a10091f70d21e6229638c4e6a902a 7a0530962cd990f Output = 960fb25a94db326205638c0d02c87c064445514e30d539acecb440b36bf 74c7182a915b7b900ddeab239d4fe73ebcb451e05a4aacb8a05cfd403327b4606f27 a A.1.2.2. Test Vector 2, Batch Size 1 Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a Blind = e6d0f1d89ad552e383d6c6f4e8598cc3037d6e274d22da3089e7afbd4171 ea02 BlindedElement = 9669e8326632c31ddac138b1da65cf39bdc6fa085050f5afd2b fedf3dc1a3313 EvaluationElement = dc1bf956f7ee401ff5fd1ab206ac13ead704d609ce81469a 9710cde58ef9bc7c EvaluationProofC = 44d8c86b857be2321c2ddf75898508e0f9b56e96ea21c76a8 ddc2f229ff4bc00 EvaluationProofS = cec985971cfb2b5747374d85527a58b0a69ce906e5f9eb2fd 56c56b409e51e02 Output = fce0ce88eda349292e209eae49032e03bc73a756a5093ca380b0f59db94 2783aa29396bd2215a721e55a71c166586d3b867e5673713951f79c2499f75a7fa0e d A.1.2.3. Test Vector 3, Batch Size 2 Davidson, et al. Expires 25 August 2021 [Page 37] Internet-Draft OPRFs February 2021 Input = 00,5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a Blind = 80513e77795feeec6d2c450589b0e1b178febd5c193a9fcba0d27f0a06e0 d50f,533c2e6d91c934f919ac218973be55ba0d7b234160a0d4cf3bddafbda99e2e0 c BlindedElement = 6620ec0b7dc26cb6a6cc7a72ecf28971863861b88363b374f91 c44c056544245,06f533d9495a54252c2ccced2edb2fb5840f9cf8462a8233a7b4ec 2d5f788348 EvaluationElement = c2860fa4213e425c1e5eebff92bbb8e532389b8871fae9fa f2348718483f6c05,9618bb1dee5a94017e020993ad7cb0cfb4b5d5b70538ce85680 acd3b9348757b EvaluationProofC = 8ecc6109a673872da634dbaa091674a255866599e380dc6c2 12e163f976b7706 EvaluationProofS = 0949b5e1705ba2c76d179deef6c45891cc38a0515010be0a9 007bf9471c7fe0e Output = 960fb25a94db326205638c0d02c87c064445514e30d539acecb440b36bf 74c7182a915b7b900ddeab239d4fe73ebcb451e05a4aacb8a05cfd403327b4606f27 a,fce0ce88eda349292e209eae49032e03bc73a756a5093ca380b0f59db942783aa2 9396bd2215a721e55a71c166586d3b867e5673713951f79c2499f75a7fa0ed A.2. OPRF(decaf448, SHA-512) A.2.1. Base Mode seed = 22bfaee29297b24011e2635ddcd67155ec1805954faa50deb34d937143b4a eea23dcd5713571c0ab8d1810efe2749a23c323e2eb757f1f75 skSm = 4b2674b32c4975645382b98f2cd8401eaf90a48c5be505118bc674eca46e7 422042565e51ca263bb8b4285d7f0f099835da2d4a4ecfccd39 A.2.1.1. Test Vector 1, Batch Size 1 Input = 00 Blind = d1080372f0fcf8c5eace50914e7127f576725f215cc7c111673c635ce668 bbbb9b50601ad89b358ab8c23ed0b6c9d040365ec9d060868714 BlindedElement = 0e5e2ac2924bee04fa1ae372a6a26f6f71972372494c08433d6 766aeb103c2aef393e06cdc52ed270f1c94e4538068ab724d84ad217f7b2c EvaluationElement = 9837f23012ebd3f817e597481b03d6da85b17d16eee4c5f4 6986355a751a348d0911b141173b40d0dc0c97792fc4a0749c1b9586cfab0b6d Output = 9139010e665e84800d86d912c5ea0407b51efd3fb9fdad5fc661964a15a 1591e35f22d5d5dc14f4f68456987702863642eca5fadbc8ad5e07732d0a8c589813 3 A.2.1.2. Test Vector 2, Batch Size 1 Davidson, et al. Expires 25 August 2021 [Page 38] Internet-Draft OPRFs February 2021 Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a Blind = aed1ffa44fd8f0ed16373606a3cf7df589cca86d8ea1abbf5768771dbef3 d401c74ae55ba1e28b9565e1e4018eb261a14134a4ce60c1c718 BlindedElement = 0016392cdfbe773dd6740eaa7b41ad19b62b7552a5fff88a337 90391c656726e7c7b346c2d6989085c6bc11b31a14b15ba2340f776891dc0 EvaluationElement = fc0afdf7f6eaefb86c884b2dd8a21ffe8c375d1e189def2d b0b284542be94f338bea2e341961a31d61644e01e2ff6f3d6a07dd5212fda0c7 Output = 52f8970ec1ed4759758135e5526422d0dfb912b45a963a0e94ea8aa27c0 54b34c8eb1b5bb65bb3ea45dbb58e1da99046658669cc5161c20d5f948f9a7fce0a0 c A.2.2. Verifiable Mode seed = 9cd0d686c7af3459483e2dcd807912748650131d61c654dd0657213eea091 03b13290911110f36b27e2d1a73660fc7c7dc7d2243f5c56c35 skSm = 2e233ab9d5a9300c0c8af8410b819eff8c47ddf6a65daddf046ee1ef91b05 89b39bad3b5ac2cf6b0263c201dd98bf79fcd9eee79d2890f34 pkSm = ac0a06cde8eddf02a5fb710537e00ffcac23ca6de5c744309366fd7fe71b7 1a135a7977c763c457d0449d2fd627132817036349e65adcbf5 A.2.2.1. Test Vector 1, Batch Size 1 Input = 00 Blind = 4c936db1779a621b6c71475ac3111fd5703a59b713929f36dfd1e892a7fe 814479c93d8b4b6e11d1f6fe5351e51457b665fa7b76074e531f BlindedElement = b06491721a030478fcf4756de92f0937e29a3898496964636be 0c9c884a3143a933dcc085e9a0303bde79b3ebdc77448eaa80203d7b57c40 EvaluationElement = e20b32caa3976efe88ff6104ae69d1e4110ce8d536e7b8d6 c42e9d3188ceacb11c759f2e6352d1ea52272b018e0a6c30da35f2ffb4d53f50 EvaluationProofC = 75162c17aaa22c38538ad5d3bb1dab6b7dde1410f76f58de2 5fe98e90c3d43a6532f6277ef45c424deeb4b0f4105bf3edbbef9e8d6327330 EvaluationProofS = 6e6cb40e86974de14f2a96a87d8e4b78f31a92b67a2232f44 39d0d28e65a79e2b764006c11b89620e15e826bc6ffb22c4e3c3c41593b6830 Output = 727b216c822412144797413444bf52bde9a7e3d0e0b8a18fbce80316914 01992cc413951da6f2e557833bf5ef227260ea508f7e2fb7fe221adaa98c8d990177 a A.2.2.2. Test Vector 2, Batch Size 1 Davidson, et al. Expires 25 August 2021 [Page 39] Internet-Draft OPRFs February 2021 Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a Blind = 15b3355179392f40c3d5a15f0d5ffc354e340454ec779f575e4573a3886a b5e57e4da2985cea9e32f6d95539ce2c7189e1bd7462e8c5483a BlindedElement = 3ea98d0d80c5e34582534f06daa3f5747d594fc271dddf4bcb9 034442eb01564ad92e4a4340f2c9e40f4f212a0a7cdc7bdcad3b8cf83998f EvaluationElement = 4a981797731fad28fac6c9423eaf3d4ec74214ef38edc8a6 33cbe8912d1ec157ecb34f8b10f23eb67f7dbc35764b0e37d02e3e3254793a45 EvaluationProofC = 3ec1c00ad2821e528058ed30081e6a1cd5f344a45e9bf51eb 9a34895b680b88c20d9464023ae8e754c208a9792af139a2f5a6ab43b266924 EvaluationProofS = 0063bb1ffffe2e2ec2d22d7b9fa61d8d8914b5599eaaf8998 6d41201b9baa51b9393cce63e7ea7e5155fdf6c7747ddbd999d1818a06b9a29 Output = 025579e09632d69fa8a58fb93fd7dd0b03fa719247cbe6716ebdc49e2c9 f5e10ac2ea2c17230a86d0716efd4e223e541e65cd83e8ef95eb5c212456126f75d1 6 A.2.2.3. Test Vector 3, Batch Size 2 Input = 00,5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a Blind = 614bb578f29cc677ea9e7aea3e4839413997e020f9377b63c13584156a09 a46dd2a425c41eac0e313a47e99d05df72c6e1d58e6592577a0d,4c115060bca87db 7d73e00cbb8559f84cb7a221b235b0950a0ab553f03f10e1386abe954011b7da62bb 6599418ef90b5d4ea98cc28aff517 BlindedElement = 3a3cb2e82a88063371b1983fbb47e4b6838102f3225f21fb578 af1398ca763a0c1ef7e3c827547d85d87a53ea18b6e29695c0667f7e6d062,a27a04 823af77878e659b5be66bd61baf06207cfcba7365c9a4dbbdc4d013119c0d88d6b23 b1eb7dee10bb553ec8bdbc1d1e38a18ee7103c EvaluationElement = 8e6630cac5c1d4d7b76b478432a9a5b633314e0880d2c026 04267ea2499998170ac84ac6ad0c71ef335ac8201ae1f9bda3d4c6873e175a88,08c 4e567eac74f299a91474d893fc204625e1e15db42b81e574950fbf0d51f78059feb0 d7a3cb528b65e81b2902fcf78f1b785bd54d90ac2 EvaluationProofC = 060ea0d134649060a9dc7d4747f9302096229bbd90d6bed3a b2f9694cbd06e2642d12b533dab8ba3a96eb47e635c8c6ca544e5f74b2c4535 EvaluationProofS = f15fabd7dfb504b9473989366b19b6d3576d8c64670099f66 a41756e6dcbf854100dc33ce97d27599f5dfe388ba1efb36ca4737de11b1403 Output = 727b216c822412144797413444bf52bde9a7e3d0e0b8a18fbce80316914 01992cc413951da6f2e557833bf5ef227260ea508f7e2fb7fe221adaa98c8d990177 a,025579e09632d69fa8a58fb93fd7dd0b03fa719247cbe6716ebdc49e2c9f5e10ac 2ea2c17230a86d0716efd4e223e541e65cd83e8ef95eb5c212456126f75d16 A.3. OPRF(P-256, SHA-256) A.3.1. Base Mode seed = 3eff673ea2fb8669d141dddd1af5a7e43f97f3e00e00273f6435d8407ec93 322 skSm = 95771c829754f4bec369da4f9502fbd709b5b98a260ae720fe41661868639 b20 Davidson, et al. Expires 25 August 2021 [Page 40] Internet-Draft OPRFs February 2021 A.3.1.1. Test Vector 1, Batch Size 1 Input = 00 Blind = 5d9e7f6efd3093c32ecceabd57fb03cf760c926d2a7bfa265babf29ec98a f0d0 BlindedElement = 02f09475852ef62318680a3ea1319d0474dfabc4402b752ec94 7c8a37c5c1491a2 EvaluationElement = 03b304fc1030556762e95ada14aaf68358a68cc66efa231b 5a6014daff0d75f239 Output = a7bb47cee7f531bd5dc412a4a14b10c6fe532c5e9e74a7509a4b2349311 b01a8 A.3.1.2. Test Vector 2, Batch Size 1 Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a Blind = 825155ab61f17605af2ae2e935c78d857c9407bcd45128d57d338f1671b5 fcbe BlindedElement = 02589019677db1bca1ca2f94da740691016578952337e2d19e0 7d1de0d26563c4f EvaluationElement = 02d26a438f0b7fd11950ddca72f9d8302c3c9363c596255e 544f3cc1680736d6d1 Output = 26918fb45d5aa80e101954ac6f6455497aab7423e7271571f87fad343c3 93dd1 A.3.2. Verifiable Mode seed = ab2f339a7220e50cc4dc9da84913863596593d9ead69c6a61cf50d8da5cdf 079 skSm = 0773c16f0faf8a5d3e8f76631600d5d5837cb65192531d8f06add8151c895 923 pkSm = 02715ccbcb67ce334bc6527dfbc795aea8839d13c888eeae822022ff8062c c7e5b A.3.2.1. Test Vector 1, Batch Size 1 Input = 00 Blind = cee64d86fd20ab4caa264a26c0e3d42fb773b3173ba76f9588c9b14779bd 8d91 BlindedElement = 03458b1f2964895be9500419f7252a5f899932a0e1a80dad2a5 8c93205d87c189c EvaluationElement = 02f33b62756f2af3e7789adb228a69d6a477fb9c71ff0bf7 31f9e1688fed173856 EvaluationProofC = f20cd08a2fc81ac3379f1704cb1e63fd7d206fab9b0d8aeda 4d3814e2d21ac83 EvaluationProofS = 85ca571b54edea4b8bce2247c37cdea760aab6f480286e871 d1b5aaf8354fe7c Output = 307bce9725d306e5b28c589084e9458985d57e482c8a4e92bf2ffd1e236 3672d Davidson, et al. Expires 25 August 2021 [Page 41] Internet-Draft OPRFs February 2021 A.3.2.2. Test Vector 2, Batch Size 1 Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a Blind = 5c4b401063eff0bf242b4cd534a79bacfc2e715b2db1e7a3ad4ff8af1b24 daa2 BlindedElement = 02b600c8cd1f859fb7a87a1c9298b68d12902e4d093c9573af0 6b1b376c58e6623 EvaluationElement = 03af5ace869c4c48a4d169f72a5d78fa806c566f36dbd73a 40372373b5ff5b7d47 EvaluationProofC = 31b202d4df078ac8def9054a29ee0dce585fbff4384763606 c16bd2489b9507e EvaluationProofS = 1cfc5ab981b3da6a9ee344108fb1e2547e7817ec7f1966638 6014b4950f62230 Output = cba462665ec1a01c302a05f2c29a2e4b5282ee639db91460f63353999ec 6ac53 A.3.2.3. Test Vector 3, Batch Size 2 Input = 00,5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a Blind = f0c7822ba317fb5e86028c44b92bd3aedcf6744d388ca013ef33edd36930 4eda,3b9631be9f8b274d9aaf671bfb6a775229bf435021b89c683259773bc686956 b BlindedElement = 03ac68c358da4a3cff87c0a31e9646d178be69bbda8e00d204e 10d00d4518b8821,03f0189aef822b923cfacb055a74af1111c545093a1c8b2afabc d79abf79a300da EvaluationElement = 03f7c0a0373e2bf57d0f86d92ad1e8d97c009a420d43706e f3ba5707c8b0fb4b85,02b14ee68ff6194b8be68a72f6968f62f53018699694f3ada bc5825f7181cf60d4 EvaluationProofC = 0785f1389d3e9e91e5514d97d192f8f35cd5288b52b750332 e7ae696d350abc2 EvaluationProofS = b0e8ee29aabee13fa30833e9c55b9c657d1b52e6599058432 3825ed6c596f9b2 Output = 307bce9725d306e5b28c589084e9458985d57e482c8a4e92bf2ffd1e236 3672d,cba462665ec1a01c302a05f2c29a2e4b5282ee639db91460f63353999ec6ac 53 A.4. OPRF(P-384, SHA-512) A.4.1. Base Mode seed = 63e92b15555b6cb760d44daf230782c763430c860fcac60eac7508526b79c 96cdf05f0489f13a1196b4d5cabc8f257f3 skSm = 8abb9c0771d2fd11ffb7d84ae7623d32c92a8688f7ab4110f041cba48990a 533f4c5d6d396e75ceeddffda061301f0ff A.4.1.1. Test Vector 1, Batch Size 1 Davidson, et al. Expires 25 August 2021 [Page 42] Internet-Draft OPRFs February 2021 Input = 00 Blind = 359073c015b92d15450f7fb395bf52c6ea98384c491fe4e4d423b59de7b0 df382902c13bdc9993d3717bda68fc080b99 BlindedElement = 022250ba7604814ab2058e70fdc5dcf2604afb3ab6e15fc97c5 14973bb5e574d586ce518700ad0dd02b54982ce202020e1 EvaluationElement = 02779e7450227d438ee2b24d257cad8ec842fe6b1f1ed55e fdb65c07d3058036759059b8f4bbdbae3d5db0b7444b276a43 Output = 26668250052b501b6d884549726eaf95094a4c249eb83ff6c90fab0e798 88b0b3fdbb449e22d42834377d3a990087fe0b33a20ab60ce1a0b0d75d09c08c7c76 4 A.4.1.2. Test Vector 2, Batch Size 1 Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a Blind = 21ece4f9b6ffd01ce82082545413bd9bb5e8f3c63b86ae88d9ce0530b01c b1c23382c7ec9bdd6e75898e4877d8e2bc17 BlindedElement = 022dd0addbced4c8ea73eaa8e38f43506a7c3f98288ed479725 d596fa3a578f728915414f5df77084cadefcd5e4662f6df EvaluationElement = 0274578679fbcff1a9d8e5fedf024361a039915b7e347540 960f24fb7434b1d9b54655e91237226234182f2515e1d50501 Output = 4e603ffa07b244507b6939359caa372a27793c65a08027df9859fe768cb c0d454803d6929d95a7a0bf399065d91140a559e627d9b2386fae03c3d8c4f9ad9c4 f A.4.2. Verifiable Mode seed = 1ce2b395fbc9b0c94142ca50b5237fbf30955deb98195e4a8f9b85b14cbfb a7a12c9fe2fa70222086298dce67fc0ce56 skSm = b33d6912f3d98f4127eb29022196ae5fd203875953fdd00eed62588cf7511 9c594e841c2caea2b7eac83bdf6f26e9b4a pkSm = 029668c6874e11fb84c854653910bad621060af56e3beaa459a454ac9d8d6 90092aa5361739737da93327a76e219fa6155 A.4.2.1. Test Vector 1, Batch Size 1 Davidson, et al. Expires 25 August 2021 [Page 43] Internet-Draft OPRFs February 2021 Input = 00 Blind = 102f6338df84c9602bfa9e7d690b1f7a173d07e6d54a419db4a6308f8b09 589e4283efb9cd1ee4061c6bf884e60a8774 BlindedElement = 03c267661f12013daa1e4fe319713adde264a37bea8b91c5cb2 71e9e3ee12e5ed829f5a7a23aa4803704381e638a927e3a EvaluationElement = 02711fcd5e6f778121ff23f40fbbf0280ff022f61437be61 931126244a0c5ab3ad80bb28eb5112f750e82bb2951d39ccf1 EvaluationProofC = 51ead6a0432a4d5c355fc58c075d420907e1155703a9df21e 51128ed900391e5e4aa6b14d7d5a1df271c7c8e816363ed EvaluationProofS = 88a8510e0aabfd3d0957616adc007508d030e21d695a768df 57b1db194847f4e93aa89cdb553c5d9ebc141f4a0bb9369 Output = 1512d25e41336b8975d51e061f3ad8ca79f76fb6c5467526c9fecfd38cf e7d811fc969d10c9caa87190a3879004e9bcbeef8904f4c644cb378bf461c237fff0 0 A.4.2.2. Test Vector 2, Batch Size 1 Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a Blind = 8aec1d0c3d16afd032da7ba961449a56cec6fb918e932b06d5778ac7f67b ecfb3e3869237f74106241777f230582e84a BlindedElement = 038f7b700d59fe135484a799fa10bb761b622d29a606ef9ecb5 b922409de93473c850bbccfd449a9cd1c352021faed9285 EvaluationElement = 028bb86d62701dd511ae0e7d074ed46519c71d3d8b82be23 6e17de883e41e2c5d0d779f75c59fcdd7b21a7aebdaddb1294 EvaluationProofC = 4ad66d430fe36eca8dd13d72b8a79c14afe42dd8b78196cef 650c6c9425c01cc269ddcfb435db06924047fdfa32d87fe EvaluationProofS = d8340cbcbf1bc19afeca7bac68610b6101588b99a99cea1dd 5aa7824d0f7cd188204883f20252d23e453ee7d2dea6a54 Output = 2fed20cb0c1bcda344057b5c16faa96cc62a9ae6572a94a175b1a2742a2 d299ff95de6ebcfe6ac1859d88cd154c1498a22ce7578ed2d1beca5c21f9857f0207 d A.4.2.3. Test Vector 3, Batch Size 2 Davidson, et al. Expires 25 August 2021 [Page 44] Internet-Draft OPRFs February 2021 Input = 00,5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a Blind = 41fabd4722d92472d858051ce9ad1a533176a862c697b2c392aff2aeb77e b20c2ae6ba52fe31e13e03bf1d9f39878b23,51171628f1d28bb7402ca4aea6465e2 67b7f977a1fb71593281099ef2625644aee0b6c5f5e6e01a2b052b3bd4caf539b BlindedElement = 0261f6684d6b14f9a751e3837b09545fea017d792c3b3585524 7b4e900adf6874c77a57805b020c3ae2e7560e078fb2410,02e2b67e4571f2d83998 6cd1b989edebe55ed6c05fb5173e12ed7c56fd262f2ab806b23f44e81101f532b224 d788e66c02 EvaluationElement = 029a2f611bd2f4346e9f834e91c6828354fb49262e60473f a494b65be33478bcac5e253878be75613beffb45da0ac3c3a0,03fc35912f5f1642c 75bbbddbd6844861eef94ab435ea63292e3c073b8af4f3c2c20db0741b5a167acf5e 3f92b8eeceeb5 EvaluationProofC = a3009c06dd2c102d748bb7d3bc873fb6bad12aa310f6ca83a 2d9591109ef05211789c9876704e043054ebd4bc11e62a8 EvaluationProofS = 861ab3ea88d2e428d0ca95332a7ccb3f3d71c5158502925e2 3d4ee84b1f4619302ba7bd4822538be223bb22f6955cf39 Output = 1512d25e41336b8975d51e061f3ad8ca79f76fb6c5467526c9fecfd38cf e7d811fc969d10c9caa87190a3879004e9bcbeef8904f4c644cb378bf461c237fff0 0,2fed20cb0c1bcda344057b5c16faa96cc62a9ae6572a94a175b1a2742a2d299ff9 5de6ebcfe6ac1859d88cd154c1498a22ce7578ed2d1beca5c21f9857f0207d A.5. OPRF(P-521, SHA-512) A.5.1. Base Mode seed = 860941f8d1d28513d9b38da971d0291cb2532a9dacc9256d5eaaa022e3f32 bb447479ec7d6bc8204328b9f28fb3ccf63ebba9e02837c8386e7a50f6cb210467e5 78f skSm = 0095b985908df61dae8bf8c037488cafea62377af2a2f41030f6dd8b3c750 237c241ad68e7f07682d422fc2395008a3811675be0a53a58c4dae4b5974ad11d6f8 4d4 A.5.1.1. Test Vector 1, Batch Size 1 Input = 00 Blind = 01b983705fcc9a39607288b935b0797ac6b3c4b2e848823ac9ae16b3a3b5 816be03432370deb7c3c17d9fc7cb4e0ce646e04e42d638e0fa7a434ed340772a8b5 d626 BlindedElement = 0301df6ecf5c96659ecc36613357a9f337b43687e0073f67b9a d8b6714bc1e8abdfbb74115189474ddb697df70676c551c103d601640c51e10ef607 fc4d0fe485b557f EvaluationElement = 0300b7706ad75473f5265a4456b3fbc61c998895cc157cb1 f48ba433f5fc3cb9caf845aa959b89eca919aff08f19d38d195a9fa7c0862362e681 09a45f980b124e5be0 Output = 3a34c3c5c87a7d14617e3f20fb76b861f6db25b0074369b80e5256dd30b 8a749393f90e7bcea80c844fc1bbdc62d52a80c6c648fb3e470d39ea4cd98138a819 f Davidson, et al. Expires 25 August 2021 [Page 45] Internet-Draft OPRFs February 2021 A.5.1.2. Test Vector 2, Batch Size 1 Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a Blind = 01a03b1096b0316bc8567c89bd70267d35c8ddcb2be2cdc867089a2eb5cf 471b1e6eb4b043b9644c8539857abe3a2022e9c9fd6a1695bbabe8add48bcd149ff3 b841 BlindedElement = 0201412d7330e8ef457d1e21e25feb41c3b09d3bcd347916743 f60b10cdb0bd9498a965f35ee525ffccc16606be42a1c1764d18fabd7bb0b61da95a b3c9a23918233ef EvaluationElement = 020182d03c2244a6be2246f023ce67cd876b88dc75ebfcad d0c952f6cc4ec7f47c31b2f019e8091e999f866ec3110cfd7c84e91c4185dab1e2bc 5cdd9e87662276ad85 Output = 105da360c0bca0e14a645cbb8b93e0033d061f3351ac494882c9a00c9c6 0263a17382bcec7bcf96a96a41800de007a5313120ff6b96ec236eed872a4de23f70 d A.5.2. Verifiable Mode seed = 2d317f9cfdbedf19e3b3264399ffbac20c1c39899b50af2f0abb24177ddfc 5b0682e6ba98e41e90814b9b8216d82c211be6a9f886b5f73f49188ba7aeb7fab828 d0b skSm = 0097bfe7b0db0760d3d062be371d5fb9ae91f75221dc7b24be288deec3dac d049f79ed8f5ae99d825970b37c398ea01e8a3e14209fb2e8f53be8dd98b63626ab0 df6 pkSm = 0200641f1fbe204bdf4f47b358a3daa1f0c68ca55e39716178ae7804c5b86 faf4822bcffef994411eee7bf8d708b42b5d02b7fc13de3ab14cf3fd1ca24d9d83e9 f3db9 A.5.2.1. Test Vector 1, Batch Size 1 Davidson, et al. Expires 25 August 2021 [Page 46] Internet-Draft OPRFs February 2021 Input = 00 Blind = 00bbb82117c88bbd91b8954e16c0b9ceed3ce992b198be1ebfba9ba970db d75beefbfc6d056b7f7ba1ef79f4facbf2d912c26ce2ecc5bb8d66419b379952e96b d6f5 BlindedElement = 0200f9ed4c09f771e30913440c62139f63300f6577d31f5af0b 026ef2c7dfa438516c7265702cc9bfdba04e1bca1796447ad55fab987d4d72ee7076 5328651033581e2 EvaluationElement = 0300c69b7af34014ec66228f8109a71294e86b232a500ca4 a8e5c29f105a7c078f08eaeb1a29dbf8c1baa64976097c938f721686aac8f22b5b4c f09147606d07bedd14 EvaluationProofC = 0180092b8c106e6453eee63718642a11580d3943947940e71 abc67d961693153e32f8c3428514c3f32bbf04cd2cee437f5dad3de81802ee259aa6 9f14de908c4af1c EvaluationProofS = 00010c5168438bcfb0fcdd5737416ed4c2f3ab9fdd70d5552 721444872dd6dda4c7324eade2460aa1cd193b2f2b99f7651f090a163ddab135d69e 73e816a0e5cb101 Output = 5d6bb0a459ebabdc24f4eb1f2d5ba84967b5362e28b4263113ae82f64b6 16b14675c300a80d1a29f3b9f43c7c115d76a55b69785925b193d0742e32c7c26abc 2 A.5.2.2. Test Vector 2, Batch Size 1 Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a Blind = 009055c99bf9591cb0eab2a72d044c05ca2cc2ef9b609a38546f74b6d688 f70cf205f782fa11a0d61b2f5a8a2a1143368327f3077c68a1545e9aafbba6a90dc0 d40a BlindedElement = 0201dfa5dc7ea17f0cf60caa26d2a488e7af296268834b35eaf f497488a211670008a74ed649b20379ab63a3ff8f2dd718f5418cb30ec317e68b5c8 014a577b19710a3 EvaluationElement = 03008ec6ce61d8438ba2d10d83a476ba8cc28d7e385e2ea6 357ac00226491fa9b037d14775bd0beb152ba0b1559979f0d186fcd3b76983d1a25f 9a958d71eba5564e4f EvaluationProofC = 01dfab8e49173c15e3fe755b6d0d18181eb6f223cd44c4d8c 3bb67727cabf209d95858fe82ecfab0ed6958bd088567cc759d7fe2d00be07973248 b5154f567598443 EvaluationProofS = 017a99db7e59297be3bee22d7de9f7939dbf55a3d0d3344ec 61f44be16ef2aed795b355a1fb583b5bef5aefe105f7ffa2e0feb063d56be48ee8d5 a43fdf4f11f9339 Output = be1882653a80f060f3c65f654270c202abbc5be961cb8c79ff952f2e284 a82ba087e8c26f06c43c98518b0b75940d061a3f5665557e292cee9e86487be05bba 6 A.5.2.3. Test Vector 3, Batch Size 2 Davidson, et al. Expires 25 August 2021 [Page 47] Internet-Draft OPRFs February 2021 Input = 00,5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a Blind = 01c6cf092d80c7cf2cb55388d899515238094c800bdd9c65f71780ba85f5 ae9b4703e17e559ca3ccd1944f9a70536c175f11a827452672b60d4e9f89eba28104 6e29,00cba1ba1a337759061965a423d9d3d6e1e1006dc8984ad28a4c93ecfc36fc2 171046b3c4284855cfa2434ed98db9e68a597db2c14728fade716a6a82d600444b26 e BlindedElement = 0300be204aba0367d902f293aa8bda66a136f7e3962dfafab88 ba04aacf62a4e63993060704cd1714cf7af4e16ea0a1c91ff7506a65b40253f6ae01 9b7a6160d50c814,0200082b5f723e4a635902e5bbf27fea807792399af5ac8d276b c6aa62bc1685cb6bdb2ff1c92979d4413da3627df180d709ddd03597fc8f095c6826 fd97e8adbceca9 EvaluationElement = 0200482edc448a8be76098f64ff783309b7e5c1e8882b7e1 c25c05308ce594063252e5b6ff7ea52621d56762ae4dbac4ff38be14608a5f967667 79d331e65964823d80,03008c0faeb5ba9eaf1c2303e2dbaed68274b77898455a944 fab83603c5495e4ec74adcc3bf78cdacdac6996d657f6f163e82680987f0ded2062b ee712843c4ffaf054 EvaluationProofC = 0008ce3eb07c5b4b230c1e7424d3282ebfa665aee41f69860 a64312d706361cb3c2704b12490f5e0d58681c91cbea4f53cbd1d4925c450b2ed9b4 b1ddfa92cb30cbb EvaluationProofS = 00b5521b8a33efb3bb0e1c02f5d93b3fb9d8f6531085a7117 cd78cea125bf20eaeae59a179067d45119b34f2ef82f71e54bda17440c3e27f04d50 04c49ab25a62add Output = 5d6bb0a459ebabdc24f4eb1f2d5ba84967b5362e28b4263113ae82f64b6 16b14675c300a80d1a29f3b9f43c7c115d76a55b69785925b193d0742e32c7c26abc 2,be1882653a80f060f3c65f654270c202abbc5be961cb8c79ff952f2e284a82ba08 7e8c26f06c43c98518b0b75940d061a3f5665557e292cee9e86487be05bba6 Authors' Addresses Alex Davidson Email: alex.davidson92@gmail.com Armando Faz-Hernandez Cloudflare 101 Townsend St San Francisco, United States of America Email: armfazh@cloudflare.com Davidson, et al. Expires 25 August 2021 [Page 48] Internet-Draft OPRFs February 2021 Nick Sullivan Cloudflare 101 Townsend St San Francisco, United States of America Email: nick@cloudflare.com Christopher A. Wood Cloudflare 101 Townsend St San Francisco, United States of America Email: caw@heapingbits.net Davidson, et al. Expires 25 August 2021 [Page 49]