Network Working Group R. Fielding Internet-Draft Day Software Obsoletes: 2616 (if approved) J. Gettys Intended status: Standards Track J. Mogul Expires: May 23, 2007 HP H. Frystyk Microsoft L. Masinter Adobe Systems P. Leach Microsoft T. Berners-Lee W3C/MIT Y. Lafon, Ed. W3C J. Reschke, Ed. greenbytes November 19, 2006 Hypertext Transfer Protocol -- HTTP/1.1 draft-lafon-rfc2616bis-02 Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on May 23, 2007. Fielding, et al. Expires May 23, 2007 [Page 1] Internet-Draft HTTP/1.1 November 2006 Copyright Notice Copyright (C) The IETF Trust (2006). Fielding, et al. Expires May 23, 2007 [Page 2] Internet-Draft HTTP/1.1 November 2006 Abstract The Hypertext Transfer Protocol (HTTP) is an application-level protocol for distributed, collaborative, hypermedia information systems. It is a generic, stateless, protocol which can be used for many tasks beyond its use for hypertext, such as name servers and distributed object management systems, through extension of its request methods, error codes and headers [RFC2324]. A feature of HTTP is the typing and negotiation of data representation, allowing systems to be built independently of the data being transferred. HTTP has been in use by the World-Wide Web global information initiative since 1990. This specification defines the protocol referred to as "HTTP/1.1", and is an update to RFC2616. Fielding, et al. Expires May 23, 2007 [Page 3] Internet-Draft HTTP/1.1 November 2006 Editorial Note (To be removed by RFC Editor before publication) Distribution of this document is unlimited. Please send comments to the Hypertext Transfer Protocol (HTTP) mailing list at ietf-http-wg@w3.org [1], which may be joined by sending a message with subject "subscribe" to ietf-http-wg-request@w3.org [2]. Discussions of the HTTP working group are archived at . XML versions, latest edits and the issues list for this document are available from . The purpose of this document is to revise [RFC2616], doing only minimal corrections. For now, it is not planned to advance the standards level of HTTP, thus - if published - the specification will still be a "Proposed Standard" (see [RFC2026]). The current plan is to incorporate known errata, and to update the specification text according to the current IETF publication guidelines. In particular: o Incorporate the corrections collected in the RFC2616 errata document () (most of the suggested fixes have been applied to draft 01). o Incorporate corrections for newly discovered and agreed-upon problems, using the HTTP WG mailing list as forum and as issues list. o Update references, and re-classify them into "Normative" and "Informative", based on the prior work done by Jim Gettys in . This document is based on a variant of the original RFC2616 specification formatted using Marshall T. Rose's "xml2rfc" tool (see ) and therefore deviates from the original text in word wrapping, page breaks, list formatting, reference formatting, whitespace usage and appendix numbering. Otherwise, it is supposed to contain an accurate copy of the original specification text. See for a comparison between both documents, as generated by "rfcdiff" (). Fielding, et al. Expires May 23, 2007 [Page 4] Internet-Draft HTTP/1.1 November 2006 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 11 1.1. Purpose . . . . . . . . . . . . . . . . . . . . . . . . 11 1.2. Requirements . . . . . . . . . . . . . . . . . . . . . . 11 1.3. Terminology . . . . . . . . . . . . . . . . . . . . . . 12 1.4. Overall Operation . . . . . . . . . . . . . . . . . . . 16 2. Notational Conventions and Generic Grammar . . . . . . . . . 19 2.1. Augmented BNF . . . . . . . . . . . . . . . . . . . . . 19 2.2. Basic Rules . . . . . . . . . . . . . . . . . . . . . . 21 3. Protocol Parameters . . . . . . . . . . . . . . . . . . . . . 23 3.1. HTTP Version . . . . . . . . . . . . . . . . . . . . . . 23 3.2. Uniform Resource Identifiers . . . . . . . . . . . . . . 24 3.2.1. General Syntax . . . . . . . . . . . . . . . . . . . 24 3.2.2. http URL . . . . . . . . . . . . . . . . . . . . . . 25 3.2.3. URI Comparison . . . . . . . . . . . . . . . . . . . 25 3.3. Date/Time Formats . . . . . . . . . . . . . . . . . . . 26 3.3.1. Full Date . . . . . . . . . . . . . . . . . . . . . 26 3.3.2. Delta Seconds . . . . . . . . . . . . . . . . . . . 27 3.4. Character Sets . . . . . . . . . . . . . . . . . . . . . 27 3.4.1. Missing Charset . . . . . . . . . . . . . . . . . . 28 3.5. Content Codings . . . . . . . . . . . . . . . . . . . . 29 3.6. Transfer Codings . . . . . . . . . . . . . . . . . . . . 30 3.6.1. Chunked Transfer Coding . . . . . . . . . . . . . . 31 3.7. Media Types . . . . . . . . . . . . . . . . . . . . . . 32 3.7.1. Canonicalization and Text Defaults . . . . . . . . . 33 3.7.2. Multipart Types . . . . . . . . . . . . . . . . . . 34 3.8. Product Tokens . . . . . . . . . . . . . . . . . . . . . 34 3.9. Quality Values . . . . . . . . . . . . . . . . . . . . . 35 3.10. Language Tags . . . . . . . . . . . . . . . . . . . . . 35 3.11. Entity Tags . . . . . . . . . . . . . . . . . . . . . . 36 3.12. Range Units . . . . . . . . . . . . . . . . . . . . . . 36 4. HTTP Message . . . . . . . . . . . . . . . . . . . . . . . . 38 4.1. Message Types . . . . . . . . . . . . . . . . . . . . . 38 4.2. Message Headers . . . . . . . . . . . . . . . . . . . . 38 4.3. Message Body . . . . . . . . . . . . . . . . . . . . . . 39 4.4. Message Length . . . . . . . . . . . . . . . . . . . . . 40 4.5. General Header Fields . . . . . . . . . . . . . . . . . 41 5. Request . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 5.1. Request-Line . . . . . . . . . . . . . . . . . . . . . . 43 5.1.1. Method . . . . . . . . . . . . . . . . . . . . . . . 43 5.1.2. Request-URI . . . . . . . . . . . . . . . . . . . . 44 5.2. The Resource Identified by a Request . . . . . . . . . . 45 5.3. Request Header Fields . . . . . . . . . . . . . . . . . 46 6. Response . . . . . . . . . . . . . . . . . . . . . . . . . . 47 6.1. Status-Line . . . . . . . . . . . . . . . . . . . . . . 47 6.1.1. Status Code and Reason Phrase . . . . . . . . . . . 47 6.2. Response Header Fields . . . . . . . . . . . . . . . . . 50 Fielding, et al. Expires May 23, 2007 [Page 5] Internet-Draft HTTP/1.1 November 2006 7. Entity . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 7.1. Entity Header Fields . . . . . . . . . . . . . . . . . . 51 7.2. Entity Body . . . . . . . . . . . . . . . . . . . . . . 51 7.2.1. Type . . . . . . . . . . . . . . . . . . . . . . . . 52 7.2.2. Entity Length . . . . . . . . . . . . . . . . . . . 52 8. Connections . . . . . . . . . . . . . . . . . . . . . . . . . 53 8.1. Persistent Connections . . . . . . . . . . . . . . . . . 53 8.1.1. Purpose . . . . . . . . . . . . . . . . . . . . . . 53 8.1.2. Overall Operation . . . . . . . . . . . . . . . . . 53 8.1.3. Proxy Servers . . . . . . . . . . . . . . . . . . . 55 8.1.4. Practical Considerations . . . . . . . . . . . . . . 55 8.2. Message Transmission Requirements . . . . . . . . . . . 56 8.2.1. Persistent Connections and Flow Control . . . . . . 56 8.2.2. Monitoring Connections for Error Status Messages . . 56 8.2.3. Use of the 100 (Continue) Status . . . . . . . . . . 57 8.2.4. Client Behavior if Server Prematurely Closes Connection . . . . . . . . . . . . . . . . . . . . . 59 9. Method Definitions . . . . . . . . . . . . . . . . . . . . . 60 9.1. Safe and Idempotent Methods . . . . . . . . . . . . . . 60 9.1.1. Safe Methods . . . . . . . . . . . . . . . . . . . . 60 9.1.2. Idempotent Methods . . . . . . . . . . . . . . . . . 60 9.2. OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . 61 9.3. GET . . . . . . . . . . . . . . . . . . . . . . . . . . 62 9.4. HEAD . . . . . . . . . . . . . . . . . . . . . . . . . . 62 9.5. POST . . . . . . . . . . . . . . . . . . . . . . . . . . 63 9.6. PUT . . . . . . . . . . . . . . . . . . . . . . . . . . 64 9.7. DELETE . . . . . . . . . . . . . . . . . . . . . . . . . 65 9.8. TRACE . . . . . . . . . . . . . . . . . . . . . . . . . 65 9.9. CONNECT . . . . . . . . . . . . . . . . . . . . . . . . 66 10. Status Code Definitions . . . . . . . . . . . . . . . . . . . 67 10.1. Informational 1xx . . . . . . . . . . . . . . . . . . . 67 10.1.1. 100 Continue . . . . . . . . . . . . . . . . . . . . 67 10.1.2. 101 Switching Protocols . . . . . . . . . . . . . . 67 10.2. Successful 2xx . . . . . . . . . . . . . . . . . . . . . 68 10.2.1. 200 OK . . . . . . . . . . . . . . . . . . . . . . . 68 10.2.2. 201 Created . . . . . . . . . . . . . . . . . . . . 68 10.2.3. 202 Accepted . . . . . . . . . . . . . . . . . . . . 68 10.2.4. 203 Non-Authoritative Information . . . . . . . . . 69 10.2.5. 204 No Content . . . . . . . . . . . . . . . . . . . 69 10.2.6. 205 Reset Content . . . . . . . . . . . . . . . . . 69 10.2.7. 206 Partial Content . . . . . . . . . . . . . . . . 70 10.3. Redirection 3xx . . . . . . . . . . . . . . . . . . . . 70 10.3.1. 300 Multiple Choices . . . . . . . . . . . . . . . . 71 10.3.2. 301 Moved Permanently . . . . . . . . . . . . . . . 71 10.3.3. 302 Found . . . . . . . . . . . . . . . . . . . . . 72 10.3.4. 303 See Other . . . . . . . . . . . . . . . . . . . 72 10.3.5. 304 Not Modified . . . . . . . . . . . . . . . . . . 73 10.3.6. 305 Use Proxy . . . . . . . . . . . . . . . . . . . 73 Fielding, et al. Expires May 23, 2007 [Page 6] Internet-Draft HTTP/1.1 November 2006 10.3.7. 306 (Unused) . . . . . . . . . . . . . . . . . . . . 74 10.3.8. 307 Temporary Redirect . . . . . . . . . . . . . . . 74 10.4. Client Error 4xx . . . . . . . . . . . . . . . . . . . . 74 10.4.1. 400 Bad Request . . . . . . . . . . . . . . . . . . 75 10.4.2. 401 Unauthorized . . . . . . . . . . . . . . . . . . 75 10.4.3. 402 Payment Required . . . . . . . . . . . . . . . . 75 10.4.4. 403 Forbidden . . . . . . . . . . . . . . . . . . . 75 10.4.5. 404 Not Found . . . . . . . . . . . . . . . . . . . 75 10.4.6. 405 Method Not Allowed . . . . . . . . . . . . . . . 76 10.4.7. 406 Not Acceptable . . . . . . . . . . . . . . . . . 76 10.4.8. 407 Proxy Authentication Required . . . . . . . . . 76 10.4.9. 408 Request Timeout . . . . . . . . . . . . . . . . 77 10.4.10. 409 Conflict . . . . . . . . . . . . . . . . . . . . 77 10.4.11. 410 Gone . . . . . . . . . . . . . . . . . . . . . . 77 10.4.12. 411 Length Required . . . . . . . . . . . . . . . . 78 10.4.13. 412 Precondition Failed . . . . . . . . . . . . . . 78 10.4.14. 413 Request Entity Too Large . . . . . . . . . . . . 78 10.4.15. 414 Request-URI Too Long . . . . . . . . . . . . . . 78 10.4.16. 415 Unsupported Media Type . . . . . . . . . . . . . 78 10.4.17. 416 Requested Range Not Satisfiable . . . . . . . . 78 10.4.18. 417 Expectation Failed . . . . . . . . . . . . . . . 79 10.5. Server Error 5xx . . . . . . . . . . . . . . . . . . . . 79 10.5.1. 500 Internal Server Error . . . . . . . . . . . . . 79 10.5.2. 501 Not Implemented . . . . . . . . . . . . . . . . 79 10.5.3. 502 Bad Gateway . . . . . . . . . . . . . . . . . . 79 10.5.4. 503 Service Unavailable . . . . . . . . . . . . . . 80 10.5.5. 504 Gateway Timeout . . . . . . . . . . . . . . . . 80 10.5.6. 505 HTTP Version Not Supported . . . . . . . . . . . 80 11. Access Authentication . . . . . . . . . . . . . . . . . . . . 81 12. Content Negotiation . . . . . . . . . . . . . . . . . . . . . 82 12.1. Server-driven Negotiation . . . . . . . . . . . . . . . 82 12.2. Agent-driven Negotiation . . . . . . . . . . . . . . . . 83 12.3. Transparent Negotiation . . . . . . . . . . . . . . . . 84 13. Caching in HTTP . . . . . . . . . . . . . . . . . . . . . . . 85 13.1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 13.1.1. Cache Correctness . . . . . . . . . . . . . . . . . 86 13.1.2. Warnings . . . . . . . . . . . . . . . . . . . . . . 87 13.1.3. Cache-control Mechanisms . . . . . . . . . . . . . . 88 13.1.4. Explicit User Agent Warnings . . . . . . . . . . . . 88 13.1.5. Exceptions to the Rules and Warnings . . . . . . . . 89 13.1.6. Client-controlled Behavior . . . . . . . . . . . . . 89 13.2. Expiration Model . . . . . . . . . . . . . . . . . . . . 90 13.2.1. Server-Specified Expiration . . . . . . . . . . . . 90 13.2.2. Heuristic Expiration . . . . . . . . . . . . . . . . 90 13.2.3. Age Calculations . . . . . . . . . . . . . . . . . . 91 13.2.4. Expiration Calculations . . . . . . . . . . . . . . 93 13.2.5. Disambiguating Expiration Values . . . . . . . . . . 94 13.2.6. Disambiguating Multiple Responses . . . . . . . . . 95 Fielding, et al. Expires May 23, 2007 [Page 7] Internet-Draft HTTP/1.1 November 2006 13.3. Validation Model . . . . . . . . . . . . . . . . . . . . 95 13.3.1. Last-Modified Dates . . . . . . . . . . . . . . . . 96 13.3.2. Entity Tag Cache Validators . . . . . . . . . . . . 96 13.3.3. Weak and Strong Validators . . . . . . . . . . . . . 97 13.3.4. Rules for When to Use Entity Tags and Last-Modified Dates . . . . . . . . . . . . . . . . 99 13.3.5. Non-validating Conditionals . . . . . . . . . . . . 101 13.4. Response Cacheability . . . . . . . . . . . . . . . . . 101 13.5. Constructing Responses From Caches . . . . . . . . . . . 102 13.5.1. End-to-end and Hop-by-hop Headers . . . . . . . . . 102 13.5.2. Non-modifiable Headers . . . . . . . . . . . . . . . 103 13.5.3. Combining Headers . . . . . . . . . . . . . . . . . 104 13.5.4. Combining Byte Ranges . . . . . . . . . . . . . . . 105 13.6. Caching Negotiated Responses . . . . . . . . . . . . . . 106 13.7. Shared and Non-Shared Caches . . . . . . . . . . . . . . 107 13.8. Errors or Incomplete Response Cache Behavior . . . . . . 107 13.9. Side Effects of GET and HEAD . . . . . . . . . . . . . . 108 13.10. Invalidation After Updates or Deletions . . . . . . . . 108 13.11. Write-Through Mandatory . . . . . . . . . . . . . . . . 109 13.12. Cache Replacement . . . . . . . . . . . . . . . . . . . 109 13.13. History Lists . . . . . . . . . . . . . . . . . . . . . 110 14. Header Field Definitions . . . . . . . . . . . . . . . . . . 111 14.1. Accept . . . . . . . . . . . . . . . . . . . . . . . . . 111 14.2. Accept-Charset . . . . . . . . . . . . . . . . . . . . . 113 14.3. Accept-Encoding . . . . . . . . . . . . . . . . . . . . 113 14.4. Accept-Language . . . . . . . . . . . . . . . . . . . . 115 14.5. Accept-Ranges . . . . . . . . . . . . . . . . . . . . . 116 14.6. Age . . . . . . . . . . . . . . . . . . . . . . . . . . 116 14.7. Allow . . . . . . . . . . . . . . . . . . . . . . . . . 117 14.8. Authorization . . . . . . . . . . . . . . . . . . . . . 117 14.9. Cache-Control . . . . . . . . . . . . . . . . . . . . . 118 14.9.1. What is Cacheable . . . . . . . . . . . . . . . . . 120 14.9.2. What May be Stored by Caches . . . . . . . . . . . . 121 14.9.3. Modifications of the Basic Expiration Mechanism . . 122 14.9.4. Cache Revalidation and Reload Controls . . . . . . . 124 14.9.5. No-Transform Directive . . . . . . . . . . . . . . . 126 14.9.6. Cache Control Extensions . . . . . . . . . . . . . . 127 14.10. Connection . . . . . . . . . . . . . . . . . . . . . . . 128 14.11. Content-Encoding . . . . . . . . . . . . . . . . . . . . 129 14.12. Content-Language . . . . . . . . . . . . . . . . . . . . 129 14.13. Content-Length . . . . . . . . . . . . . . . . . . . . . 130 14.14. Content-Location . . . . . . . . . . . . . . . . . . . . 131 14.15. Content-MD5 . . . . . . . . . . . . . . . . . . . . . . 132 14.16. Content-Range . . . . . . . . . . . . . . . . . . . . . 133 14.17. Content-Type . . . . . . . . . . . . . . . . . . . . . . 135 14.18. Date . . . . . . . . . . . . . . . . . . . . . . . . . . 135 14.18.1. Clockless Origin Server Operation . . . . . . . . . 136 14.19. ETag . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Fielding, et al. Expires May 23, 2007 [Page 8] Internet-Draft HTTP/1.1 November 2006 14.20. Expect . . . . . . . . . . . . . . . . . . . . . . . . . 137 14.21. Expires . . . . . . . . . . . . . . . . . . . . . . . . 138 14.22. From . . . . . . . . . . . . . . . . . . . . . . . . . . 139 14.23. Host . . . . . . . . . . . . . . . . . . . . . . . . . . 139 14.24. If-Match . . . . . . . . . . . . . . . . . . . . . . . . 140 14.25. If-Modified-Since . . . . . . . . . . . . . . . . . . . 141 14.26. If-None-Match . . . . . . . . . . . . . . . . . . . . . 143 14.27. If-Range . . . . . . . . . . . . . . . . . . . . . . . . 144 14.28. If-Unmodified-Since . . . . . . . . . . . . . . . . . . 145 14.29. Last-Modified . . . . . . . . . . . . . . . . . . . . . 145 14.30. Location . . . . . . . . . . . . . . . . . . . . . . . . 146 14.31. Max-Forwards . . . . . . . . . . . . . . . . . . . . . . 147 14.32. Pragma . . . . . . . . . . . . . . . . . . . . . . . . . 147 14.33. Proxy-Authenticate . . . . . . . . . . . . . . . . . . . 148 14.34. Proxy-Authorization . . . . . . . . . . . . . . . . . . 148 14.35. Range . . . . . . . . . . . . . . . . . . . . . . . . . 149 14.35.1. Byte Ranges . . . . . . . . . . . . . . . . . . . . 149 14.35.2. Range Retrieval Requests . . . . . . . . . . . . . . 150 14.36. Referer . . . . . . . . . . . . . . . . . . . . . . . . 151 14.37. Retry-After . . . . . . . . . . . . . . . . . . . . . . 152 14.38. Server . . . . . . . . . . . . . . . . . . . . . . . . . 152 14.39. TE . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 14.40. Trailer . . . . . . . . . . . . . . . . . . . . . . . . 154 14.41. Transfer-Encoding . . . . . . . . . . . . . . . . . . . 154 14.42. Upgrade . . . . . . . . . . . . . . . . . . . . . . . . 155 14.43. User-Agent . . . . . . . . . . . . . . . . . . . . . . . 156 14.44. Vary . . . . . . . . . . . . . . . . . . . . . . . . . . 156 14.45. Via . . . . . . . . . . . . . . . . . . . . . . . . . . 157 14.46. Warning . . . . . . . . . . . . . . . . . . . . . . . . 159 14.47. WWW-Authenticate . . . . . . . . . . . . . . . . . . . . 161 15. Security Considerations . . . . . . . . . . . . . . . . . . . 162 15.1. Personal Information . . . . . . . . . . . . . . . . . . 162 15.1.1. Abuse of Server Log Information . . . . . . . . . . 162 15.1.2. Transfer of Sensitive Information . . . . . . . . . 162 15.1.3. Encoding Sensitive Information in URI's . . . . . . 163 15.1.4. Privacy Issues Connected to Accept Headers . . . . . 164 15.2. Attacks Based On File and Path Names . . . . . . . . . . 164 15.3. DNS Spoofing . . . . . . . . . . . . . . . . . . . . . . 165 15.4. Location Headers and Spoofing . . . . . . . . . . . . . 165 15.5. Content-Disposition Issues . . . . . . . . . . . . . . . 166 15.6. Authentication Credentials and Idle Clients . . . . . . 166 15.7. Proxies and Caching . . . . . . . . . . . . . . . . . . 166 15.7.1. Denial of Service Attacks on Proxies . . . . . . . . 167 16. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 168 16.1. (RFC2616) . . . . . . . . . . . . . . . . . . . . . . . 168 16.2. (This Document) . . . . . . . . . . . . . . . . . . . . 169 17. References . . . . . . . . . . . . . . . . . . . . . . . . . 170 17.1. References . . . . . . . . . . . . . . . . . . . . . . . 170 Fielding, et al. Expires May 23, 2007 [Page 9] Internet-Draft HTTP/1.1 November 2006 17.2. Informative References . . . . . . . . . . . . . . . . . 174 Appendix A. Internet Media Type message/http and application/http . . . . . . . . . . . . . . . . . . 176 Appendix B. Internet Media Type multipart/byteranges . . . . . . 178 Appendix C. Tolerant Applications . . . . . . . . . . . . . . . 180 Appendix D. Differences Between HTTP Entities and RFC 2045 Entities . . . . . . . . . . . . . . . . . . . . . . 181 D.1. MIME-Version . . . . . . . . . . . . . . . . . . . . . . 181 D.2. Conversion to Canonical Form . . . . . . . . . . . . . . 181 D.3. Conversion of Date Formats . . . . . . . . . . . . . . . 182 D.4. Introduction of Content-Encoding . . . . . . . . . . . . 182 D.5. No Content-Transfer-Encoding . . . . . . . . . . . . . . 182 D.6. Introduction of Transfer-Encoding . . . . . . . . . . . 183 D.7. MHTML and Line Length Limitations . . . . . . . . . . . 183 Appendix E. Additional Features . . . . . . . . . . . . . . . . 184 E.1. Content-Disposition . . . . . . . . . . . . . . . . . . 184 Appendix F. Compatibility with Previous Versions . . . . . . . . 185 F.1. Changes from HTTP/1.0 . . . . . . . . . . . . . . . . . 185 F.1.1. Changes to Simplify Multi-homed Web Servers and Conserve IP Addresses . . . . . . . . . . . . . . . 185 F.2. Compatibility with HTTP/1.0 Persistent Connections . . . 186 F.3. Changes from RFC 2068 . . . . . . . . . . . . . . . . . 187 F.4. Changes from RFC 2616 . . . . . . . . . . . . . . . . . 189 Appendix G. Change Log (to be removed by RFC Editor before publication) . . . . . . . . . . . . . . . . . . . . 191 G.1. Since RFC2616 . . . . . . . . . . . . . . . . . . . . . 191 G.2. Since draft-lafon-rfc2616bis-00 . . . . . . . . . . . . 191 G.3. Since draft-lafon-rfc2616bis-01 . . . . . . . . . . . . 191 Appendix H. Resolved issues (to be removed by RFC Editor before publication) . . . . . . . . . . . . . . . . 192 H.1. rfc2606-compliance . . . . . . . . . . . . . . . . . . . 192 H.2. references_style . . . . . . . . . . . . . . . . . . . . 192 H.3. media-reg . . . . . . . . . . . . . . . . . . . . . . . 192 H.4. location-fragments . . . . . . . . . . . . . . . . . . . 193 Appendix I. Open issues (to be removed by RFC Editor prior to publication) . . . . . . . . . . . . . . . . . . . . 194 I.1. rfc2616bis . . . . . . . . . . . . . . . . . . . . . . . 194 I.2. unneeded_references . . . . . . . . . . . . . . . . . . 194 I.3. edit . . . . . . . . . . . . . . . . . . . . . . . . . . 194 I.4. rfc2048_informative_and_obsolete . . . . . . . . . . . . 194 I.5. languagetag . . . . . . . . . . . . . . . . . . . . . . 194 I.6. fragment-combination . . . . . . . . . . . . . . . . . . 195 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 207 Intellectual Property and Copyright Statements . . . . . . . . . 210 Fielding, et al. Expires May 23, 2007 [Page 10] Internet-Draft HTTP/1.1 November 2006 1. Introduction 1.1. Purpose The Hypertext Transfer Protocol (HTTP) is an application-level protocol for distributed, collaborative, hypermedia information systems. HTTP has been in use by the World-Wide Web global information initiative since 1990. The first version of HTTP, referred to as HTTP/0.9, was a simple protocol for raw data transfer across the Internet. HTTP/1.0, as defined by [RFC1945], improved the protocol by allowing messages to be in the format of MIME-like messages, containing metainformation about the data transferred and modifiers on the request/response semantics. However, HTTP/1.0 does not sufficiently take into consideration the effects of hierarchical proxies, caching, the need for persistent connections, or virtual hosts. In addition, the proliferation of incompletely-implemented applications calling themselves "HTTP/1.0" has necessitated a protocol version change in order for two communicating applications to determine each other's true capabilities. This specification defines the protocol referred to as "HTTP/1.1". This protocol includes more stringent requirements than HTTP/1.0 in order to ensure reliable implementation of its features. Practical information systems require more functionality than simple retrieval, including search, front-end update, and annotation. HTTP allows an open-ended set of methods and headers that indicate the purpose of a request [RFC2324]. It builds on the discipline of reference provided by the Uniform Resource Identifier (URI) [RFC1630], as a location (URL) [RFC1738] or name (URN) [RFC1737], for indicating the resource to which a method is to be applied. Messages are passed in a format similar to that used by Internet mail [RFC822] as defined by the Multipurpose Internet Mail Extensions (MIME) [RFC2045]. HTTP is also used as a generic protocol for communication between user agents and proxies/gateways to other Internet systems, including those supported by the SMTP [RFC821], NNTP [RFC977], FTP [RFC959], Gopher [RFC1436], and WAIS [WAIS] protocols. In this way, HTTP allows basic hypermedia access to resources available from diverse applications. 1.2. Requirements The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. Fielding, et al. Expires May 23, 2007 [Page 11] Internet-Draft HTTP/1.1 November 2006 An implementation is not compliant if it fails to satisfy one or more of the MUST or REQUIRED level requirements for the protocols it implements. An implementation that satisfies all the MUST or REQUIRED level and all the SHOULD level requirements for its protocols is said to be "unconditionally compliant"; one that satisfies all the MUST level requirements but not all the SHOULD level requirements for its protocols is said to be "conditionally compliant." 1.3. Terminology This specification uses a number of terms to refer to the roles played by participants in, and objects of, the HTTP communication. connection A transport layer virtual circuit established between two programs for the purpose of communication. message The basic unit of HTTP communication, consisting of a structured sequence of octets matching the syntax defined in Section 4 and transmitted via the connection. request An HTTP request message, as defined in Section 5. response An HTTP response message, as defined in Section 6. resource A network data object or service that can be identified by a URI, as defined in Section 3.2. Resources may be available in multiple representations (e.g. multiple languages, data formats, size, and resolutions) or vary in other ways. entity The information transferred as the payload of a request or response. An entity consists of metainformation in the form of entity-header fields and content in the form of an entity-body, as described in Section 7. representation Fielding, et al. Expires May 23, 2007 [Page 12] Internet-Draft HTTP/1.1 November 2006 An entity included with a response that is subject to content negotiation, as described in Section 12. There may exist multiple representations associated with a particular response status. content negotiation The mechanism for selecting the appropriate representation when servicing a request, as described in Section 12. The representation of entities in any response can be negotiated (including error responses). variant A resource may have one, or more than one, representation(s) associated with it at any given instant. Each of these representations is termed a `variant'. Use of the term `variant' does not necessarily imply that the resource is subject to content negotiation. client A program that establishes connections for the purpose of sending requests. user agent The client which initiates a request. These are often browsers, editors, spiders (web-traversing robots), or other end user tools. server An application program that accepts connections in order to service requests by sending back responses. Any given program may be capable of being both a client and a server; our use of these terms refers only to the role being performed by the program for a particular connection, rather than to the program's capabilities in general. Likewise, any server may act as an origin server, proxy, gateway, or tunnel, switching behavior based on the nature of each request. origin server The server on which a given resource resides or is to be created. proxy An intermediary program which acts as both a server and a client for the purpose of making requests on behalf of other clients. Fielding, et al. Expires May 23, 2007 [Page 13] Internet-Draft HTTP/1.1 November 2006 Requests are serviced internally or by passing them on, with possible translation, to other servers. A proxy MUST implement both the client and server requirements of this specification. A "transparent proxy" is a proxy that does not modify the request or response beyond what is required for proxy authentication and identification. A "non-transparent proxy" is a proxy that modifies the request or response in order to provide some added service to the user agent, such as group annotation services, media type transformation, protocol reduction, or anonymity filtering. Except where either transparent or non-transparent behavior is explicitly stated, the HTTP proxy requirements apply to both types of proxies. gateway A server which acts as an intermediary for some other server. Unlike a proxy, a gateway receives requests as if it were the origin server for the requested resource; the requesting client may not be aware that it is communicating with a gateway. tunnel An intermediary program which is acting as a blind relay between two connections. Once active, a tunnel is not considered a party to the HTTP communication, though the tunnel may have been initiated by an HTTP request. The tunnel ceases to exist when both ends of the relayed connections are closed. cache A program's local store of response messages and the subsystem that controls its message storage, retrieval, and deletion. A cache stores cacheable responses in order to reduce the response time and network bandwidth consumption on future, equivalent requests. Any client or server may include a cache, though a cache cannot be used by a server that is acting as a tunnel. cacheable A response is cacheable if a cache is allowed to store a copy of the response message for use in answering subsequent requests. The rules for determining the cacheability of HTTP responses are defined in Section 13. Even if a resource is cacheable, there may be additional constraints on whether a cache can use the cached copy for a particular request. first-hand Fielding, et al. Expires May 23, 2007 [Page 14] Internet-Draft HTTP/1.1 November 2006 A response is first-hand if it comes directly and without unnecessary delay from the origin server, perhaps via one or more proxies. A response is also first-hand if its validity has just been checked directly with the origin server. explicit expiration time The time at which the origin server intends that an entity should no longer be returned by a cache without further validation. heuristic expiration time An expiration time assigned by a cache when no explicit expiration time is available. age The age of a response is the time since it was sent by, or successfully validated with, the origin server. freshness lifetime The length of time between the generation of a response and its expiration time. fresh A response is fresh if its age has not yet exceeded its freshness lifetime. stale A response is stale if its age has passed its freshness lifetime. semantically transparent A cache behaves in a "semantically transparent" manner, with respect to a particular response, when its use affects neither the requesting client nor the origin server, except to improve performance. When a cache is semantically transparent, the client receives exactly the same response (except for hop-by-hop headers) that it would have received had its request been handled directly by the origin server. validator A protocol element (e.g., an entity tag or a Last-Modified time) that is used to find out whether a cache entry is an equivalent Fielding, et al. Expires May 23, 2007 [Page 15] Internet-Draft HTTP/1.1 November 2006 copy of an entity. upstream/downstream Upstream and downstream describe the flow of a message: all messages flow from upstream to downstream. inbound/outbound Inbound and outbound refer to the request and response paths for messages: "inbound" means "traveling toward the origin server", and "outbound" means "traveling toward the user agent" 1.4. Overall Operation The HTTP protocol is a request/response protocol. A client sends a request to the server in the form of a request method, URI, and protocol version, followed by a MIME-like message containing request modifiers, client information, and possible body content over a connection with a server. The server responds with a status line, including the message's protocol version and a success or error code, followed by a MIME-like message containing server information, entity metainformation, and possible entity-body content. The relationship between HTTP and MIME is described in Appendix D. Most HTTP communication is initiated by a user agent and consists of a request to be applied to a resource on some origin server. In the simplest case, this may be accomplished via a single connection (v) between the user agent (UA) and the origin server (O). request chain ------------------------> UA -------------------v------------------- O <----------------------- response chain A more complicated situation occurs when one or more intermediaries are present in the request/response chain. There are three common forms of intermediary: proxy, gateway, and tunnel. A proxy is a forwarding agent, receiving requests for a URI in its absolute form, rewriting all or part of the message, and forwarding the reformatted request toward the server identified by the URI. A gateway is a receiving agent, acting as a layer above some other server(s) and, if necessary, translating the requests to the underlying server's protocol. A tunnel acts as a relay point between two connections without changing the messages; tunnels are used when the communication needs to pass through an intermediary (such as a firewall) even when the intermediary cannot understand the contents of the messages. Fielding, et al. Expires May 23, 2007 [Page 16] Internet-Draft HTTP/1.1 November 2006 request chain --------------------------------------> UA -----v----- A -----v----- B -----v----- C -----v----- O <------------------------------------- response chain The figure above shows three intermediaries (A, B, and C) between the user agent and origin server. A request or response message that travels the whole chain will pass through four separate connections. This distinction is important because some HTTP communication options may apply only to the connection with the nearest, non-tunnel neighbor, only to the end-points of the chain, or to all connections along the chain. Although the diagram is linear, each participant may be engaged in multiple, simultaneous communications. For example, B may be receiving requests from many clients other than A, and/or forwarding requests to servers other than C, at the same time that it is handling A's request. Any party to the communication which is not acting as a tunnel may employ an internal cache for handling requests. The effect of a cache is that the request/response chain is shortened if one of the participants along the chain has a cached response applicable to that request. The following illustrates the resulting chain if B has a cached copy of an earlier response from O (via C) for a request which has not been cached by UA or A. request chain ----------> UA -----v----- A -----v----- B - - - - - - C - - - - - - O <--------- response chain Not all responses are usefully cacheable, and some requests may contain modifiers which place special requirements on cache behavior. HTTP requirements for cache behavior and cacheable responses are defined in Section 13. In fact, there are a wide variety of architectures and configurations of caches and proxies currently being experimented with or deployed across the World Wide Web. These systems include national hierarchies of proxy caches to save transoceanic bandwidth, systems that broadcast or multicast cache entries, organizations that distribute subsets of cached data via CD-ROM, and so on. HTTP systems are used in corporate intranets over high-bandwidth links, and for access via PDAs with low-power radio links and intermittent connectivity. The goal of HTTP/1.1 is to support the wide diversity of configurations already deployed while introducing protocol constructs that meet the needs of those who build web applications that require high reliability and, failing that, at least reliable indications of failure. HTTP communication usually takes place over TCP/IP connections. The Fielding, et al. Expires May 23, 2007 [Page 17] Internet-Draft HTTP/1.1 November 2006 default port is TCP 80 [RFC1700], but other ports can be used. This does not preclude HTTP from being implemented on top of any other protocol on the Internet, or on other networks. HTTP only presumes a reliable transport; any protocol that provides such guarantees can be used; the mapping of the HTTP/1.1 request and response structures onto the transport data units of the protocol in question is outside the scope of this specification. In HTTP/1.0, most implementations used a new connection for each request/response exchange. In HTTP/1.1, a connection may be used for one or more request/response exchanges, although connections may be closed for a variety of reasons (see Section 8.1). Fielding, et al. Expires May 23, 2007 [Page 18] Internet-Draft HTTP/1.1 November 2006 2. Notational Conventions and Generic Grammar 2.1. Augmented BNF All of the mechanisms specified in this document are described in both prose and an augmented Backus-Naur Form (BNF) similar to that used by [RFC822]. Implementors will need to be familiar with the notation in order to understand this specification. The augmented BNF includes the following constructs: name = definition The name of a rule is simply the name itself (without any enclosing "<" and ">") and is separated from its definition by the equal "=" character. White space is only significant in that indentation of continuation lines is used to indicate a rule definition that spans more than one line. Certain basic rules are in uppercase, such as SP, LWS, HT, CRLF, DIGIT, ALPHA, etc. Angle brackets are used within definitions whenever their presence will facilitate discerning the use of rule names. "literal" Quotation marks surround literal text. Unless stated otherwise, the text is case-insensitive. rule1 | rule2 Elements separated by a bar ("|") are alternatives, e.g., "yes | no" will accept yes or no. (rule1 rule2) Elements enclosed in parentheses are treated as a single element. Thus, "(elem (foo | bar) elem)" allows the token sequences "elem foo elem" and "elem bar elem". *rule The character "*" preceding an element indicates repetition. The full form is "*element" indicating at least and at most occurrences of element. Default values are 0 and infinity so that "*(element)" allows any number, including zero; "1*element" requires at least one; and "1*2element" allows one or two. [rule] Fielding, et al. Expires May 23, 2007 [Page 19] Internet-Draft HTTP/1.1 November 2006 Square brackets enclose optional elements; "[foo bar]" is equivalent to "*1(foo bar)". N rule Specific repetition: "(element)" is equivalent to "*(element)"; that is, exactly occurrences of (element). Thus 2DIGIT is a 2-digit number, and 3ALPHA is a string of three alphabetic characters. #rule A construct "#" is defined, similar to "*", for defining lists of elements. The full form is "#element" indicating at least and at most elements, each separated by one or more commas (",") and OPTIONAL linear white space (LWS). This makes the usual form of lists very easy; a rule such as ( *LWS element *( *LWS "," *LWS element )) can be shown as 1#element Wherever this construct is used, null elements are allowed, but do not contribute to the count of elements present. That is, "(element), , (element) " is permitted, but counts as only two elements. Therefore, where at least one element is required, at least one non-null element MUST be present. Default values are 0 and infinity so that "#element" allows any number, including zero; "1#element" requires at least one; and "1#2element" allows one or two. ; comment A semi-colon, set off some distance to the right of rule text, starts a comment that continues to the end of line. This is a simple way of including useful notes in parallel with the specifications. implied *LWS The grammar described by this specification is word-based. Except where noted otherwise, linear white space (LWS) can be included between any two adjacent words (token or quoted-string), and between adjacent words and separators, without changing the interpretation of a field. At least one delimiter (LWS and/or separators) MUST exist between any two tokens (for the definition Fielding, et al. Expires May 23, 2007 [Page 20] Internet-Draft HTTP/1.1 November 2006 of "token" below), since they would otherwise be interpreted as a single token. 2.2. Basic Rules The following rules are used throughout this specification to describe basic parsing constructs. The US-ASCII coded character set is defined by ANSI X3.4-1986 [USASCII]. OCTET = CHAR = UPALPHA = LOALPHA = ALPHA = UPALPHA | LOALPHA DIGIT = CTL = CR = LF = SP = HT = <"> = HTTP/1.1 defines the sequence CR LF as the end-of-line marker for all protocol elements except the entity-body (see Appendix C for tolerant applications). The end-of-line marker within an entity-body is defined by its associated media type, as described in Section 3.7. CRLF = CR LF HTTP/1.1 header field values can be folded onto multiple lines if the continuation line begins with a space or horizontal tab. All linear white space, including folding, has the same semantics as SP. A recipient MAY replace any linear white space with a single SP before interpreting the field value or forwarding the message downstream. LWS = [CRLF] 1*( SP | HT ) The TEXT rule is only used for descriptive field contents and values that are not intended to be interpreted by the message parser. Words of *TEXT MAY contain characters from character sets other than ISO- 8859-1 [ISO-8859] only when encoded according to the rules of [RFC2047]. TEXT = A CRLF is allowed in the definition of TEXT only as part of a header Fielding, et al. Expires May 23, 2007 [Page 21] Internet-Draft HTTP/1.1 November 2006 field continuation. It is expected that the folding LWS will be replaced with a single SP before interpretation of the TEXT value. Hexadecimal numeric characters are used in several protocol elements. HEX = "A" | "B" | "C" | "D" | "E" | "F" | "a" | "b" | "c" | "d" | "e" | "f" | DIGIT Many HTTP/1.1 header field values consist of words separated by LWS or special characters. These special characters MUST be in a quoted string to be used within a parameter value (as defined in Section 3.6). token = 1* separators = "(" | ")" | "<" | ">" | "@" | "," | ";" | ":" | "\" | <"> | "/" | "[" | "]" | "?" | "=" | "{" | "}" | SP | HT Comments can be included in some HTTP header fields by surrounding the comment text with parentheses. Comments are only allowed in fields containing "comment" as part of their field value definition. In all other fields, parentheses are considered part of the field value. comment = "(" *( ctext | quoted-pair | comment ) ")" ctext = A string of text is parsed as a single word if it is quoted using double-quote marks. quoted-string = ( <"> *(qdtext | quoted-pair ) <"> ) qdtext = > The backslash character ("\") MAY be used as a single-character quoting mechanism only within quoted-string and comment constructs. quoted-pair = "\" CHAR Fielding, et al. Expires May 23, 2007 [Page 22] Internet-Draft HTTP/1.1 November 2006 3. Protocol Parameters 3.1. HTTP Version HTTP uses a "." numbering scheme to indicate versions of the protocol. The protocol versioning policy is intended to allow the sender to indicate the format of a message and its capacity for understanding further HTTP communication, rather than the features obtained via that communication. No change is made to the version number for the addition of message components which do not affect communication behavior or which only add to extensible field values. The number is incremented when the changes made to the protocol add features which do not change the general message parsing algorithm, but which may add to the message semantics and imply additional capabilities of the sender. The number is incremented when the format of a message within the protocol is changed. See [RFC2145] for a fuller explanation. The version of an HTTP message is indicated by an HTTP-Version field in the first line of the message. HTTP-Version = "HTTP" "/" 1*DIGIT "." 1*DIGIT Note that the major and minor numbers MUST be treated as separate integers and that each MAY be incremented higher than a single digit. Thus, HTTP/2.4 is a lower version than HTTP/2.13, which in turn is lower than HTTP/12.3. Leading zeros MUST be ignored by recipients and MUST NOT be sent. An application that sends a request or response message that includes HTTP-Version of "HTTP/1.1" MUST be at least conditionally compliant with this specification. Applications that are at least conditionally compliant with this specification SHOULD use an HTTP- Version of "HTTP/1.1" in their messages, and MUST do so for any message that is not compatible with HTTP/1.0. For more details on when to send specific HTTP-Version values, see [RFC2145]. The HTTP version of an application is the highest HTTP version for which the application is at least conditionally compliant. HTTP- Version is case-sensitive. Proxy and gateway applications need to be careful when forwarding messages in protocol versions different from that of the application. Since the protocol version indicates the protocol capability of the sender, a proxy/gateway MUST NOT send a message with a version indicator which is greater than its actual version. If a higher version request is received, the proxy/gateway MUST either downgrade the request version, or respond with an error, or switch to tunnel Fielding, et al. Expires May 23, 2007 [Page 23] Internet-Draft HTTP/1.1 November 2006 behavior. Due to interoperability problems with HTTP/1.0 proxies discovered since the publication of [RFC2068], caching proxies MUST, gateways MAY, and tunnels MUST NOT upgrade the request to the highest version they support. The proxy/gateway's response to that request MUST be in the same major version as the request. Note: Converting between versions of HTTP may involve modification of header fields required or forbidden by the versions involved. 3.2. Uniform Resource Identifiers URIs have been known by many names: WWW addresses, Universal Document Identifiers, Universal Resource Identifiers [RFC1630], and finally the combination of Uniform Resource Locators (URL) [RFC1738] and Names (URN) [RFC1737]. As far as HTTP is concerned, Uniform Resource Identifiers are simply formatted strings which identify--via name, location, or any other characteristic--a resource. 3.2.1. General Syntax URIs in HTTP can be represented in absolute form or relative to some known base URI [RFC1808], depending upon the context of their use. The two forms are differentiated by the fact that absolute URIs always begin with a scheme name followed by a colon. For definitive information on URL syntax and semantics, see "Uniform Resource Identifiers (URI): Generic Syntax and Semantics," [RFC2396] (which replaces [RFC1738] and [RFC1808]). This specification adopts the definitions of "URI-reference", "absoluteURI", "relativeURI", "port", "host","abs_path", "rel_path", and "authority" from that specification. The HTTP protocol does not place any a priori limit on the length of a URI. Servers MUST be able to handle the URI of any resource they serve, and SHOULD be able to handle URIs of unbounded length if they provide GET-based forms that could generate such URIs. A server SHOULD return 414 (Request-URI Too Long) status if a URI is longer than the server can handle (see Section 10.4.15). Note: Servers ought to be cautious about depending on URI lengths above 255 bytes, because some older client or proxy implementations might not properly support these lengths. Fielding, et al. Expires May 23, 2007 [Page 24] Internet-Draft HTTP/1.1 November 2006 3.2.2. http URL The "http" scheme is used to locate network resources via the HTTP protocol. This section defines the scheme-specific syntax and semantics for http URLs. http_URL = "http:" "//" host [ ":" port ] [ abs_path [ "?" query ]] If the port is empty or not given, port 80 is assumed. The semantics are that the identified resource is located at the server listening for TCP connections on that port of that host, and the Request-URI for the resource is abs_path (Section 5.1.2). The use of IP addresses in URLs SHOULD be avoided whenever possible (see [RFC1900]). If the abs_path is not present in the URL, it MUST be given as "/" when used as a Request-URI for a resource (Section 5.1.2). If a proxy receives a host name which is not a fully qualified domain name, it MAY add its domain to the host name it received. If a proxy receives a fully qualified domain name, the proxy MUST NOT change the host name. 3.2.3. URI Comparison When comparing two URIs to decide if they match or not, a client SHOULD use a case-sensitive octet-by-octet comparison of the entire URIs, with these exceptions: o A port that is empty or not given is equivalent to the default port for that URI-reference; o Comparisons of host names MUST be case-insensitive; o Comparisons of scheme names MUST be case-insensitive; o An empty abs_path is equivalent to an abs_path of "/". Characters other than those in the "reserved" set (see [RFC2396]) are equivalent to their ""%" HEX HEX" encoding. For example, the following three URIs are equivalent: http://example.com:80/~smith/home.html http://EXAMPLE.com/%7Esmith/home.html http://EXAMPLE.com:/%7esmith/home.html Fielding, et al. Expires May 23, 2007 [Page 25] Internet-Draft HTTP/1.1 November 2006 3.3. Date/Time Formats 3.3.1. Full Date HTTP applications have historically allowed three different formats for the representation of date/time stamps: Sun, 06 Nov 1994 08:49:37 GMT ; [RFC822], updated by [RFC1123] Sunday, 06-Nov-94 08:49:37 GMT ; RFC 850, obsoleted by [RFC1036] Sun Nov 6 08:49:37 1994 ; ANSI C's asctime() format The first format is preferred as an Internet standard and represents a fixed-length subset of that defined by [RFC1123] (an update to [RFC822]). The second format is in common use, but is based on the obsolete RFC 850 [RFC1036] date format and lacks a four-digit year. HTTP/1.1 clients and servers that parse the date value MUST accept all three formats (for compatibility with HTTP/1.0), though they MUST only generate the RFC 1123 format for representing HTTP-date values in header fields. See Appendix C for further information. Note: Recipients of date values are encouraged to be robust in accepting date values that may have been sent by non-HTTP applications, as is sometimes the case when retrieving or posting messages via proxies/gateways to SMTP or NNTP. All HTTP date/time stamps MUST be represented in Greenwich Mean Time (GMT), without exception. For the purposes of HTTP, GMT is exactly equal to UTC (Coordinated Universal Time). This is indicated in the first two formats by the inclusion of "GMT" as the three-letter abbreviation for time zone, and MUST be assumed when reading the asctime format. HTTP-date is case sensitive and MUST NOT include additional LWS beyond that specifically included as SP in the grammar. Fielding, et al. Expires May 23, 2007 [Page 26] Internet-Draft HTTP/1.1 November 2006 HTTP-date = rfc1123-date | rfc850-date | asctime-date rfc1123-date = wkday "," SP date1 SP time SP "GMT" rfc850-date = weekday "," SP date2 SP time SP "GMT" asctime-date = wkday SP date3 SP time SP 4DIGIT date1 = 2DIGIT SP month SP 4DIGIT ; day month year (e.g., 02 Jun 1982) date2 = 2DIGIT "-" month "-" 2DIGIT ; day-month-year (e.g., 02-Jun-82) date3 = month SP ( 2DIGIT | ( SP 1DIGIT )) ; month day (e.g., Jun 2) time = 2DIGIT ":" 2DIGIT ":" 2DIGIT ; 00:00:00 - 23:59:59 wkday = "Mon" | "Tue" | "Wed" | "Thu" | "Fri" | "Sat" | "Sun" weekday = "Monday" | "Tuesday" | "Wednesday" | "Thursday" | "Friday" | "Saturday" | "Sunday" month = "Jan" | "Feb" | "Mar" | "Apr" | "May" | "Jun" | "Jul" | "Aug" | "Sep" | "Oct" | "Nov" | "Dec" Note: HTTP requirements for the date/time stamp format apply only to their usage within the protocol stream. Clients and servers are not required to use these formats for user presentation, request logging, etc. 3.3.2. Delta Seconds Some HTTP header fields allow a time value to be specified as an integer number of seconds, represented in decimal, after the time that the message was received. delta-seconds = 1*DIGIT 3.4. Character Sets HTTP uses the same definition of the term "character set" as that described for MIME: The term "character set" is used in this document to refer to a method used with one or more tables to convert a sequence of octets into a sequence of characters. Note that unconditional conversion in the other direction is not required, in that not all characters may be available in a given character set and a character set may provide more than one sequence of octets to represent a particular character. This definition is intended to allow various kinds of character encoding, from simple single-table mappings such as US-ASCII to complex table switching methods such as those that use ISO-2022's techniques. However, the definition associated with a MIME character Fielding, et al. Expires May 23, 2007 [Page 27] Internet-Draft HTTP/1.1 November 2006 set name MUST fully specify the mapping to be performed from octets to characters. In particular, use of external profiling information to determine the exact mapping is not permitted. Note: This use of the term "character set" is more commonly referred to as a "character encoding." However, since HTTP and MIME share the same registry, it is important that the terminology also be shared. HTTP character sets are identified by case-insensitive tokens. The complete set of tokens is defined by the IANA Character Set registry [RFC1700]. charset = token Although HTTP allows an arbitrary token to be used as a charset value, any token that has a predefined value within the IANA Character Set registry [RFC1700] MUST represent the character set defined by that registry. Applications SHOULD limit their use of character sets to those defined by the IANA registry. HTTP uses charset in two contexts: within an Accept-Charset request header (in which the charset value is an unquoted token) and as the value of a parameter in a Content-Type header (within a request or response), in which case the parameter value of the charset parameter may be quoted. Implementors should be aware of IETF character set requirements [RFC2279] [RFC2277]. 3.4.1. Missing Charset Some HTTP/1.0 software has interpreted a Content-Type header without charset parameter incorrectly to mean "recipient should guess." Senders wishing to defeat this behavior MAY include a charset parameter even when the charset is ISO-8859-1 and SHOULD do so when it is known that it will not confuse the recipient. Unfortunately, some older HTTP/1.0 clients did not deal properly with an explicit charset parameter. HTTP/1.1 recipients MUST respect the charset label provided by the sender; and those user agents that have a provision to "guess" a charset MUST use the charset from the content-type field if they support that charset, rather than the recipient's preference, when initially displaying a document. See Section 3.7.1. Fielding, et al. Expires May 23, 2007 [Page 28] Internet-Draft HTTP/1.1 November 2006 3.5. Content Codings Content coding values indicate an encoding transformation that has been or can be applied to an entity. Content codings are primarily used to allow a document to be compressed or otherwise usefully transformed without losing the identity of its underlying media type and without loss of information. Frequently, the entity is stored in coded form, transmitted directly, and only decoded by the recipient. content-coding = token All content-coding values are case-insensitive. HTTP/1.1 uses content-coding values in the Accept-Encoding (Section 14.3) and Content-Encoding (Section 14.11) header fields. Although the value describes the content-coding, what is more important is that it indicates what decoding mechanism will be required to remove the encoding. The Internet Assigned Numbers Authority (IANA) acts as a registry for content-coding value tokens. Initially, the registry contains the following tokens: gzip An encoding format produced by the file compression program "gzip" (GNU zip) as described in [RFC1952]. This format is a Lempel-Ziv coding (LZ77) with a 32 bit CRC. compress The encoding format produced by the common UNIX file compression program "compress". This format is an adaptive Lempel-Ziv-Welch coding (LZW). Use of program names for the identification of encoding formats is not desirable and is discouraged for future encodings. Their use here is representative of historical practice, not good design. For compatibility with previous implementations of HTTP, applications SHOULD consider "x-gzip" and "x-compress" to be equivalent to "gzip" and "compress" respectively. deflate The "zlib" format defined in [RFC1950] in combination with the "deflate" compression mechanism described in [RFC1951]. identity Fielding, et al. Expires May 23, 2007 [Page 29] Internet-Draft HTTP/1.1 November 2006 The default (identity) encoding; the use of no transformation whatsoever. This content-coding is used only in the Accept- Encoding header, and SHOULD NOT be used in the Content-Encoding header. New content-coding value tokens SHOULD be registered; to allow interoperability between clients and servers, specifications of the content coding algorithms needed to implement a new value SHOULD be publicly available and adequate for independent implementation, and conform to the purpose of content coding defined in this section. 3.6. Transfer Codings Transfer-coding values are used to indicate an encoding transformation that has been, can be, or may need to be applied to an entity-body in order to ensure "safe transport" through the network. This differs from a content coding in that the transfer-coding is a property of the message, not of the original entity. transfer-coding = "chunked" | transfer-extension transfer-extension = token *( ";" parameter ) Parameters are in the form of attribute/value pairs. parameter = attribute "=" value attribute = token value = token | quoted-string All transfer-coding values are case-insensitive. HTTP/1.1 uses transfer-coding values in the TE header field (Section 14.39) and in the Transfer-Encoding header field (Section 14.41). Whenever a transfer-coding is applied to a message-body, the set of transfer-codings MUST include "chunked", unless the message is terminated by closing the connection. When the "chunked" transfer- coding is used, it MUST be the last transfer-coding applied to the message-body. The "chunked" transfer-coding MUST NOT be applied more than once to a message-body. These rules allow the recipient to determine the transfer-length of the message (Section 4.4). Transfer-codings are analogous to the Content-Transfer-Encoding values of MIME [RFC2045], which were designed to enable safe transport of binary data over a 7-bit transport service. However, safe transport has a different focus for an 8bit-clean transfer protocol. In HTTP, the only unsafe characteristic of message-bodies is the difficulty in determining the exact body length (Section 7.2.2), or the desire to encrypt data over a shared transport. Fielding, et al. Expires May 23, 2007 [Page 30] Internet-Draft HTTP/1.1 November 2006 The Internet Assigned Numbers Authority (IANA) acts as a registry for transfer-coding value tokens. Initially, the registry contains the following tokens: "chunked" (Section 3.6.1), "gzip" (Section 3.5), "compress" (Section 3.5), and "deflate" (Section 3.5). New transfer-coding value tokens SHOULD be registered in the same way as new content-coding value tokens (Section 3.5). A server which receives an entity-body with a transfer-coding it does not understand SHOULD return 501 (Unimplemented), and close the connection. A server MUST NOT send transfer-codings to an HTTP/1.0 client. 3.6.1. Chunked Transfer Coding The chunked encoding modifies the body of a message in order to transfer it as a series of chunks, each with its own size indicator, followed by an OPTIONAL trailer containing entity-header fields. This allows dynamically produced content to be transferred along with the information necessary for the recipient to verify that it has received the full message. Chunked-Body = *chunk last-chunk trailer CRLF chunk = chunk-size [ chunk-extension ] CRLF chunk-data CRLF chunk-size = 1*HEX last-chunk = 1*("0") [ chunk-extension ] CRLF chunk-extension= *( ";" chunk-ext-name [ "=" chunk-ext-val ] ) chunk-ext-name = token chunk-ext-val = token | quoted-string chunk-data = chunk-size(OCTET) trailer = *(entity-header CRLF) The chunk-size field is a string of hex digits indicating the size of the chunk-data in octets. The chunked encoding is ended by any chunk whose size is zero, followed by the trailer, which is terminated by an empty line. The trailer allows the sender to include additional HTTP header fields at the end of the message. The Trailer header field can be used to indicate which header fields are included in a trailer (see Section 14.40). Fielding, et al. Expires May 23, 2007 [Page 31] Internet-Draft HTTP/1.1 November 2006 A server using chunked transfer-coding in a response MUST NOT use the trailer for any header fields unless at least one of the following is true: 1. the request included a TE header field that indicates "trailers" is acceptable in the transfer-coding of the response, as described in Section 14.39; or, 2. the server is the origin server for the response, the trailer fields consist entirely of optional metadata, and the recipient could use the message (in a manner acceptable to the origin server) without receiving this metadata. In other words, the origin server is willing to accept the possibility that the trailer fields might be silently discarded along the path to the client. This requirement prevents an interoperability failure when the message is being received by an HTTP/1.1 (or later) proxy and forwarded to an HTTP/1.0 recipient. It avoids a situation where compliance with the protocol would have necessitated a possibly infinite buffer on the proxy. An example process for decoding a Chunked-Body is presented in Appendix D.6. All HTTP/1.1 applications MUST be able to receive and decode the "chunked" transfer-coding, and MUST ignore chunk-extension extensions they do not understand. 3.7. Media Types HTTP uses Internet Media Types [RFC1590] in the Content-Type (Section 14.17) and Accept (Section 14.1) header fields in order to provide open and extensible data typing and type negotiation. media-type = type "/" subtype *( ";" parameter ) type = token subtype = token Parameters MAY follow the type/subtype in the form of attribute/value pairs (as defined in Section 3.6). The type, subtype, and parameter attribute names are case- insensitive. Parameter values might or might not be case-sensitive, depending on the semantics of the parameter name. Linear white space (LWS) MUST NOT be used between the type and subtype, nor between an attribute and its value. The presence or absence of a parameter might be significant to the processing of a media-type, depending on Fielding, et al. Expires May 23, 2007 [Page 32] Internet-Draft HTTP/1.1 November 2006 its definition within the media type registry. Note that some older HTTP applications do not recognize media type parameters. When sending data to older HTTP applications, implementations SHOULD only use media type parameters when they are required by that type/subtype definition. Media-type values are registered with the Internet Assigned Number Authority (IANA [RFC1700]). The media type registration process is outlined in [RFC1590]. Use of non-registered media types is discouraged. 3.7.1. Canonicalization and Text Defaults Internet media types are registered with a canonical form. An entity-body transferred via HTTP messages MUST be represented in the appropriate canonical form prior to its transmission except for "text" types, as defined in the next paragraph. When in canonical form, media subtypes of the "text" type use CRLF as the text line break. HTTP relaxes this requirement and allows the transport of text media with plain CR or LF alone representing a line break when it is done consistently for an entire entity-body. HTTP applications MUST accept CRLF, bare CR, and bare LF as being representative of a line break in text media received via HTTP. In addition, if the text is represented in a character set that does not use octets 13 and 10 for CR and LF respectively, as is the case for some multi-byte character sets, HTTP allows the use of whatever octet sequences are defined by that character set to represent the equivalent of CR and LF for line breaks. This flexibility regarding line breaks applies only to text media in the entity-body; a bare CR or LF MUST NOT be substituted for CRLF within any of the HTTP control structures (such as header fields and multipart boundaries). If an entity-body is encoded with a content-coding, the underlying data MUST be in a form defined above prior to being encoded. The "charset" parameter is used with some media types to define the character set (Section 3.4) of the data. When no explicit charset parameter is provided by the sender, media subtypes of the "text" type are defined to have a default charset value of "ISO-8859-1" when received via HTTP. Data in character sets other than "ISO-8859-1" or its subsets MUST be labeled with an appropriate charset value. See Section 3.4.1 for compatibility problems. Fielding, et al. Expires May 23, 2007 [Page 33] Internet-Draft HTTP/1.1 November 2006 3.7.2. Multipart Types MIME provides for a number of "multipart" types -- encapsulations of one or more entities within a single message-body. All multipart types share a common syntax, as defined in Section 5.1.1 of [RFC2046], and MUST include a boundary parameter as part of the media type value. The message body is itself a protocol element and MUST therefore use only CRLF to represent line breaks between body-parts. Unlike in RFC 2046, the epilogue of any multipart message MUST be empty; HTTP applications MUST NOT transmit the epilogue (even if the original multipart contains an epilogue). These restrictions exist in order to preserve the self-delimiting nature of a multipart message-body, wherein the "end" of the message-body is indicated by the ending multipart boundary. In general, HTTP treats a multipart message-body no differently than any other media type: strictly as payload. The one exception is the "multipart/byteranges" type (Appendix B) when it appears in a 206 (Partial Content) response, which will be interpreted by some HTTP caching mechanisms as described in Sections 13.5.4 and 14.16. In all other cases, an HTTP user agent SHOULD follow the same or similar behavior as a MIME user agent would upon receipt of a multipart type. The MIME header fields within each body-part of a multipart message- body do not have any significance to HTTP beyond that defined by their MIME semantics. In general, an HTTP user agent SHOULD follow the same or similar behavior as a MIME user agent would upon receipt of a multipart type. If an application receives an unrecognized multipart subtype, the application MUST treat it as being equivalent to "multipart/mixed". Note: The "multipart/form-data" type has been specifically defined for carrying form data suitable for processing via the POST request method, as described in [RFC1867]. 3.8. Product Tokens Product tokens are used to allow communicating applications to identify themselves by software name and version. Most fields using product tokens also allow sub-products which form a significant part of the application to be listed, separated by white space. By convention, the products are listed in order of their significance for identifying the application. product = token ["/" product-version] product-version = token Examples: Fielding, et al. Expires May 23, 2007 [Page 34] Internet-Draft HTTP/1.1 November 2006 User-Agent: CERN-LineMode/2.15 libwww/2.17b3 Server: Apache/0.8.4 Product tokens SHOULD be short and to the point. They MUST NOT be used for advertising or other non-essential information. Although any token character MAY appear in a product-version, this token SHOULD only be used for a version identifier (i.e., successive versions of the same product SHOULD only differ in the product- version portion of the product value). 3.9. Quality Values HTTP content negotiation (Section 12) uses short "floating point" numbers to indicate the relative importance ("weight") of various negotiable parameters. A weight is normalized to a real number in the range 0 through 1, where 0 is the minimum and 1 the maximum value. If a parameter has a quality value of 0, then content with this parameter is `not acceptable' for the client. HTTP/1.1 applications MUST NOT generate more than three digits after the decimal point. User configuration of these values SHOULD also be limited in this fashion. qvalue = ( "0" [ "." 0*3DIGIT ] ) | ( "1" [ "." 0*3("0") ] ) "Quality values" is a misnomer, since these values merely represent relative degradation in desired quality. 3.10. Language Tags A language tag identifies a natural language spoken, written, or otherwise conveyed by human beings for communication of information to other human beings. Computer languages are explicitly excluded. HTTP uses language tags within the Accept-Language and Content- Language fields. The syntax and registry of HTTP language tags is the same as that defined by [RFC1766]. In summary, a language tag is composed of 1 or more parts: A primary language tag and a possibly empty series of subtags: language-tag = primary-tag *( "-" subtag ) primary-tag = 1*8ALPHA subtag = 1*8ALPHA White space is not allowed within the tag and all tags are case- insensitive. The name space of language tags is administered by the IANA. Example tags include: Fielding, et al. Expires May 23, 2007 [Page 35] Internet-Draft HTTP/1.1 November 2006 en, en-US, en-cockney, i-cherokee, x-pig-latin where any two-letter primary-tag is an ISO-639 language abbreviation and any two-letter initial subtag is an ISO-3166 country code. (The last three tags above are not registered tags; all but the last are examples of tags which could be registered in future.) 3.11. Entity Tags Entity tags are used for comparing two or more entities from the same requested resource. HTTP/1.1 uses entity tags in the ETag (Section 14.19), If-Match (Section 14.24), If-None-Match (Section 14.26), and If-Range (Section 14.27) header fields. The definition of how they are used and compared as cache validators is in Section 13.3.3. An entity tag consists of an opaque quoted string, possibly prefixed by a weakness indicator. entity-tag = [ weak ] opaque-tag weak = "W/" opaque-tag = quoted-string A "strong entity tag" MAY be shared by two entities of a resource only if they are equivalent by octet equality. A "weak entity tag," indicated by the "W/" prefix, MAY be shared by two entities of a resource only if the entities are equivalent and could be substituted for each other with no significant change in semantics. A weak entity tag can only be used for weak comparison. An entity tag MUST be unique across all versions of all entities associated with a particular resource. A given entity tag value MAY be used for entities obtained by requests on different URIs. The use of the same entity tag value in conjunction with entities obtained by requests on different URIs does not imply the equivalence of those entities. 3.12. Range Units HTTP/1.1 allows a client to request that only part (a range of) the response entity be included within the response. HTTP/1.1 uses range units in the Range (Section 14.35) and Content-Range (Section 14.16) header fields. An entity can be broken down into subranges according to various structural units. range-unit = bytes-unit | other-range-unit bytes-unit = "bytes" other-range-unit = token Fielding, et al. Expires May 23, 2007 [Page 36] Internet-Draft HTTP/1.1 November 2006 The only range unit defined by HTTP/1.1 is "bytes". HTTP/1.1 implementations MAY ignore ranges specified using other units. HTTP/1.1 has been designed to allow implementations of applications that do not depend on knowledge of ranges. Fielding, et al. Expires May 23, 2007 [Page 37] Internet-Draft HTTP/1.1 November 2006 4. HTTP Message 4.1. Message Types HTTP messages consist of requests from client to server and responses from server to client. HTTP-message = Request | Response ; HTTP/1.1 messages Request (Section 5) and Response (Section 6) messages use the generic message format of [RFC822] for transferring entities (the payload of the message). Both types of message consist of a start-line, zero or more header fields (also known as "headers"), an empty line (i.e., a line with nothing preceding the CRLF) indicating the end of the header fields, and possibly a message-body. generic-message = start-line *(message-header CRLF) CRLF [ message-body ] start-line = Request-Line | Status-Line In the interest of robustness, servers SHOULD ignore any empty line(s) received where a Request-Line is expected. In other words, if the server is reading the protocol stream at the beginning of a message and receives a CRLF first, it should ignore the CRLF. Certain buggy HTTP/1.0 client implementations generate extra CRLF's after a POST request. To restate what is explicitly forbidden by the BNF, an HTTP/1.1 client MUST NOT preface or follow a request with an extra CRLF. 4.2. Message Headers HTTP header fields, which include general-header (Section 4.5), request-header (Section 5.3), response-header (Section 6.2), and entity-header (Section 7.1) fields, follow the same generic format as that given in Section 3.1 of [RFC822]. Each header field consists of a name followed by a colon (":") and the field value. Field names are case-insensitive. The field value MAY be preceded by any amount of LWS, though a single SP is preferred. Header fields can be extended over multiple lines by preceding each extra line with at least one SP or HT. Applications ought to follow "common form", where one is known or indicated, when generating HTTP constructs, since there might exist some implementations that fail to accept anything beyond the common forms. Fielding, et al. Expires May 23, 2007 [Page 38] Internet-Draft HTTP/1.1 November 2006 message-header = field-name ":" [ field-value ] field-name = token field-value = *( field-content | LWS ) field-content = The field-content does not include any leading or trailing LWS: linear white space occurring before the first non-whitespace character of the field-value or after the last non-whitespace character of the field-value. Such leading or trailing LWS MAY be removed without changing the semantics of the field value. Any LWS that occurs between field-content MAY be replaced with a single SP before interpreting the field value or forwarding the message downstream. The order in which header fields with differing field names are received is not significant. However, it is "good practice" to send general-header fields first, followed by request-header or response- header fields, and ending with the entity-header fields. Multiple message-header fields with the same field-name MAY be present in a message if and only if the entire field-value for that header field is defined as a comma-separated list [i.e., #(values)]. It MUST be possible to combine the multiple header fields into one "field-name: field-value" pair, without changing the semantics of the message, by appending each subsequent field-value to the first, each separated by a comma. The order in which header fields with the same field-name are received is therefore significant to the interpretation of the combined field value, and thus a proxy MUST NOT change the order of these field values when a message is forwarded. 4.3. Message Body The message-body (if any) of an HTTP message is used to carry the entity-body associated with the request or response. The message- body differs from the entity-body only when a transfer-coding has been applied, as indicated by the Transfer-Encoding header field (Section 14.41). message-body = entity-body | Transfer-Encoding MUST be used to indicate any transfer-codings applied by an application to ensure safe and proper transfer of the message. Transfer-Encoding is a property of the message, not of the entity, and thus MAY be added or removed by any application along the request/response chain. (However, Section 3.6 places restrictions on Fielding, et al. Expires May 23, 2007 [Page 39] Internet-Draft HTTP/1.1 November 2006 when certain transfer-codings may be used.) The rules for when a message-body is allowed in a message differ for requests and responses. The presence of a message-body in a request is signaled by the inclusion of a Content-Length or Transfer-Encoding header field in the request's message-headers. A message-body MUST NOT be included in a request if the specification of the request method (Section 5.1.1) does not allow sending an entity-body in requests. A server SHOULD read and forward a message-body on any request; if the request method does not include defined semantics for an entity-body, then the message-body SHOULD be ignored when handling the request. For response messages, whether or not a message-body is included with a message is dependent on both the request method and the response status code (Section 6.1.1). All responses to the HEAD request method MUST NOT include a message-body, even though the presence of entity-header fields might lead one to believe they do. All 1xx (informational), 204 (no content), and 304 (not modified) responses MUST NOT include a message-body. All other responses do include a message-body, although it MAY be of zero length. 4.4. Message Length The transfer-length of a message is the length of the message-body as it appears in the message; that is, after any transfer-codings have been applied. When a message-body is included with a message, the transfer-length of that body is determined by one of the following (in order of precedence): 1. Any response message which "MUST NOT" include a message-body (such as the 1xx, 204, and 304 responses and any response to a HEAD request) is always terminated by the first empty line after the header fields, regardless of the entity-header fields present in the message. 2. If a Transfer-Encoding header field (Section 14.41) is present, then the transfer-length is defined by use of the "chunked" transfer-coding (Section 3.6), unless the message is terminated by closing the connection. 3. If a Content-Length header field (Section 14.13) is present, its decimal value in OCTETs represents both the entity-length and the transfer-length. The Content-Length header field MUST NOT be sent if these two lengths are different (i.e., if a Transfer- Encoding header field is present). If a message is received with both a Transfer-Encoding header field and a Content-Length header Fielding, et al. Expires May 23, 2007 [Page 40] Internet-Draft HTTP/1.1 November 2006 field, the latter MUST be ignored. 4. If the message uses the media type "multipart/byteranges", and the transfer-length is not otherwise specified, then this self- delimiting media type defines the transfer-length. This media type MUST NOT be used unless the sender knows that the recipient can parse it; the presence in a request of a Range header with multiple byte-range specifiers from a 1.1 client implies that the client can parse multipart/byteranges responses. A range header might be forwarded by a 1.0 proxy that does not understand multipart/byteranges; in this case the server MUST delimit the message using methods defined in items 1, 3 or 5 of this section. 5. By the server closing the connection. (Closing the connection cannot be used to indicate the end of a request body, since that would leave no possibility for the server to send back a response.) For compatibility with HTTP/1.0 applications, HTTP/1.1 requests containing a message-body MUST include a valid Content-Length header field unless the server is known to be HTTP/1.1 compliant. If a request contains a message-body and a Content-Length is not given, the server SHOULD respond with 400 (bad request) if it cannot determine the length of the message, or with 411 (length required) if it wishes to insist on receiving a valid Content-Length. All HTTP/1.1 applications that receive entities MUST accept the "chunked" transfer-coding (Section 3.6), thus allowing this mechanism to be used for messages when the message length cannot be determined in advance. Messages MUST NOT include both a Content-Length header field and a transfer-coding. If the message does include a transfer-coding, the Content-Length MUST be ignored. When a Content-Length is given in a message where a message-body is allowed, its field value MUST exactly match the number of OCTETs in the message-body. HTTP/1.1 user agents MUST notify the user when an invalid length is received and detected. 4.5. General Header Fields There are a few header fields which have general applicability for both request and response messages, but which do not apply to the entity being transferred. These header fields apply only to the message being transmitted. Fielding, et al. Expires May 23, 2007 [Page 41] Internet-Draft HTTP/1.1 November 2006 general-header = Cache-Control ; Section 14.9 | Connection ; Section 14.10 | Date ; Section 14.18 | Pragma ; Section 14.32 | Trailer ; Section 14.40 | Transfer-Encoding ; Section 14.41 | Upgrade ; Section 14.42 | Via ; Section 14.45 | Warning ; Section 14.46 General-header field names can be extended reliably only in combination with a change in the protocol version. However, new or experimental header fields may be given the semantics of general header fields if all parties in the communication recognize them to be general-header fields. Unrecognized header fields are treated as entity-header fields. Fielding, et al. Expires May 23, 2007 [Page 42] Internet-Draft HTTP/1.1 November 2006 5. Request A request message from a client to a server includes, within the first line of that message, the method to be applied to the resource, the identifier of the resource, and the protocol version in use. Request = Request-Line ; Section 5.1 *(( general-header ; Section 4.5 | request-header ; Section 5.3 | entity-header ) CRLF) ; Section 7.1 CRLF [ message-body ] ; Section 4.3 5.1. Request-Line The Request-Line begins with a method token, followed by the Request- URI and the protocol version, and ending with CRLF. The elements are separated by SP characters. No CR or LF is allowed except in the final CRLF sequence. Request-Line = Method SP Request-URI SP HTTP-Version CRLF 5.1.1. Method The Method token indicates the method to be performed on the resource identified by the Request-URI. The method is case-sensitive. Method = "OPTIONS" ; Section 9.2 | "GET" ; Section 9.3 | "HEAD" ; Section 9.4 | "POST" ; Section 9.5 | "PUT" ; Section 9.6 | "DELETE" ; Section 9.7 | "TRACE" ; Section 9.8 | "CONNECT" ; Section 9.9 | extension-method extension-method = token The list of methods allowed by a resource can be specified in an Allow header field (Section 14.7). The return code of the response always notifies the client whether a method is currently allowed on a resource, since the set of allowed methods can change dynamically. An origin server SHOULD return the status code 405 (Method Not Allowed) if the method is known by the origin server but not allowed for the requested resource, and 501 (Not Implemented) if the method is unrecognized or not implemented by the origin server. The methods GET and HEAD MUST be supported by all general-purpose servers. All other methods are OPTIONAL; however, if the above methods are Fielding, et al. Expires May 23, 2007 [Page 43] Internet-Draft HTTP/1.1 November 2006 implemented, they MUST be implemented with the same semantics as those specified in Section 9. 5.1.2. Request-URI The Request-URI is a Uniform Resource Identifier (Section 3.2) and identifies the resource upon which to apply the request. Request-URI = "*" | absoluteURI | abs_path [ "?" query ] | authority The four options for Request-URI are dependent on the nature of the request. The asterisk "*" means that the request does not apply to a particular resource, but to the server itself, and is only allowed when the method used does not necessarily apply to a resource. One example would be OPTIONS * HTTP/1.1 The absoluteURI form is REQUIRED when the request is being made to a proxy. The proxy is requested to forward the request or service it from a valid cache, and return the response. Note that the proxy MAY forward the request on to another proxy or directly to the server specified by the absoluteURI. In order to avoid request loops, a proxy MUST be able to recognize all of its server names, including any aliases, local variations, and the numeric IP address. An example Request-Line would be: GET http://www.example.org/pub/WWW/TheProject.html HTTP/1.1 To allow for transition to absoluteURIs in all requests in future versions of HTTP, all HTTP/1.1 servers MUST accept the absoluteURI form in requests, even though HTTP/1.1 clients will only generate them in requests to proxies. The authority form is only used by the CONNECT method (Section 9.9). The most common form of Request-URI is that used to identify a resource on an origin server or gateway. In this case the absolute path of the URI MUST be transmitted (see Section 3.2.1, abs_path) as the Request-URI, and the network location of the URI (authority) MUST be transmitted in a Host header field. For example, a client wishing to retrieve the resource above directly from the origin server would create a TCP connection to port 80 of the host "www.example.org" and send the lines: Fielding, et al. Expires May 23, 2007 [Page 44] Internet-Draft HTTP/1.1 November 2006 GET /pub/WWW/TheProject.html HTTP/1.1 Host: www.example.org followed by the remainder of the Request. Note that the absolute path cannot be empty; if none is present in the original URI, it MUST be given as "/" (the server root). The Request-URI is transmitted in the format specified in Section 3.2.1. If the Request-URI is encoded using the "% HEX HEX" encoding [RFC2396], the origin server MUST decode the Request-URI in order to properly interpret the request. Servers SHOULD respond to invalid Request-URIs with an appropriate status code. A transparent proxy MUST NOT rewrite the "abs_path" part of the received Request-URI when forwarding it to the next inbound server, except as noted above to replace a null abs_path with "/". Note: The "no rewrite" rule prevents the proxy from changing the meaning of the request when the origin server is improperly using a non-reserved URI character for a reserved purpose. Implementors should be aware that some pre-HTTP/1.1 proxies have been known to rewrite the Request-URI. 5.2. The Resource Identified by a Request The exact resource identified by an Internet request is determined by examining both the Request-URI and the Host header field. An origin server that does not allow resources to differ by the requested host MAY ignore the Host header field value when determining the resource identified by an HTTP/1.1 request. (But see Appendix F.1.1 for other requirements on Host support in HTTP/1.1.) An origin server that does differentiate resources based on the host requested (sometimes referred to as virtual hosts or vanity host names) MUST use the following rules for determining the requested resource on an HTTP/1.1 request: 1. If Request-URI is an absoluteURI, the host is part of the Request-URI. Any Host header field value in the request MUST be ignored. 2. If the Request-URI is not an absoluteURI, and the request includes a Host header field, the host is determined by the Host header field value. 3. If the host as determined by rule 1 or 2 is not a valid host on the server, the response MUST be a 400 (Bad Request) error Fielding, et al. Expires May 23, 2007 [Page 45] Internet-Draft HTTP/1.1 November 2006 message. Recipients of an HTTP/1.0 request that lacks a Host header field MAY attempt to use heuristics (e.g., examination of the URI path for something unique to a particular host) in order to determine what exact resource is being requested. 5.3. Request Header Fields The request-header fields allow the client to pass additional information about the request, and about the client itself, to the server. These fields act as request modifiers, with semantics equivalent to the parameters on a programming language method invocation. request-header = Accept ; Section 14.1 | Accept-Charset ; Section 14.2 | Accept-Encoding ; Section 14.3 | Accept-Language ; Section 14.4 | Authorization ; Section 14.8 | Expect ; Section 14.20 | From ; Section 14.22 | Host ; Section 14.23 | If-Match ; Section 14.24 | If-Modified-Since ; Section 14.25 | If-None-Match ; Section 14.26 | If-Range ; Section 14.27 | If-Unmodified-Since ; Section 14.28 | Max-Forwards ; Section 14.31 | Proxy-Authorization ; Section 14.34 | Range ; Section 14.35 | Referer ; Section 14.36 | TE ; Section 14.39 | User-Agent ; Section 14.43 Request-header field names can be extended reliably only in combination with a change in the protocol version. However, new or experimental header fields MAY be given the semantics of request- header fields if all parties in the communication recognize them to be request-header fields. Unrecognized header fields are treated as entity-header fields. Fielding, et al. Expires May 23, 2007 [Page 46] Internet-Draft HTTP/1.1 November 2006 6. Response After receiving and interpreting a request message, a server responds with an HTTP response message. Response = Status-Line ; Section 6.1 *(( general-header ; Section 4.5 | response-header ; Section 6.2 | entity-header ) CRLF) ; Section 7.1 CRLF [ message-body ] ; Section 7.2 6.1. Status-Line The first line of a Response message is the Status-Line, consisting of the protocol version followed by a numeric status code and its associated textual phrase, with each element separated by SP characters. No CR or LF is allowed except in the final CRLF sequence. Status-Line = HTTP-Version SP Status-Code SP Reason-Phrase CRLF 6.1.1. Status Code and Reason Phrase The Status-Code element is a 3-digit integer result code of the attempt to understand and satisfy the request. These codes are fully defined in Section 10. The Reason-Phrase is intended to give a short textual description of the Status-Code. The Status-Code is intended for use by automata and the Reason-Phrase is intended for the human user. The client is not required to examine or display the Reason- Phrase. The first digit of the Status-Code defines the class of response. The last two digits do not have any categorization role. There are 5 values for the first digit: o 1xx: Informational - Request received, continuing process o 2xx: Success - The action was successfully received, understood, and accepted o 3xx: Redirection - Further action must be taken in order to complete the request o 4xx: Client Error - The request contains bad syntax or cannot be fulfilled Fielding, et al. Expires May 23, 2007 [Page 47] Internet-Draft HTTP/1.1 November 2006 o 5xx: Server Error - The server failed to fulfill an apparently valid request The individual values of the numeric status codes defined for HTTP/1.1, and an example set of corresponding Reason-Phrase's, are presented below. The reason phrases listed here are only recommendations -- they MAY be replaced by local equivalents without affecting the protocol. Fielding, et al. Expires May 23, 2007 [Page 48] Internet-Draft HTTP/1.1 November 2006 Status-Code = "100" ; Section 10.1.1: Continue | "101" ; Section 10.1.2: Switching Protocols | "200" ; Section 10.2.1: OK | "201" ; Section 10.2.2: Created | "202" ; Section 10.2.3: Accepted | "203" ; Section 10.2.4: Non-Authoritative Information | "204" ; Section 10.2.5: No Content | "205" ; Section 10.2.6: Reset Content | "206" ; Section 10.2.7: Partial Content | "300" ; Section 10.3.1: Multiple Choices | "301" ; Section 10.3.2: Moved Permanently | "302" ; Section 10.3.3: Found | "303" ; Section 10.3.4: See Other | "304" ; Section 10.3.5: Not Modified | "305" ; Section 10.3.6: Use Proxy | "307" ; Section 10.3.8: Temporary Redirect | "400" ; Section 10.4.1: Bad Request | "401" ; Section 10.4.2: Unauthorized | "402" ; Section 10.4.3: Payment Required | "403" ; Section 10.4.4: Forbidden | "404" ; Section 10.4.5: Not Found | "405" ; Section 10.4.6: Method Not Allowed | "406" ; Section 10.4.7: Not Acceptable | "407" ; Section 10.4.8: Proxy Authentication Required | "408" ; Section 10.4.9: Request Time-out | "409" ; Section 10.4.10: Conflict | "410" ; Section 10.4.11: Gone | "411" ; Section 10.4.12: Length Required | "412" ; Section 10.4.13: Precondition Failed | "413" ; Section 10.4.14: Request Entity Too Large | "414" ; Section 10.4.15: Request-URI Too Large | "415" ; Section 10.4.16: Unsupported Media Type | "416" ; Section 10.4.17: Requested range not satisfiable | "417" ; Section 10.4.18: Expectation Failed | "500" ; Section 10.5.1: Internal Server Error | "501" ; Section 10.5.2: Not Implemented | "502" ; Section 10.5.3: Bad Gateway | "503" ; Section 10.5.4: Service Unavailable | "504" ; Section 10.5.5: Gateway Time-out | "505" ; Section 10.5.6: HTTP Version not supported | extension-code extension-code = 3DIGIT Reason-Phrase = * HTTP status codes are extensible. HTTP applications are not required to understand the meaning of all registered status codes, though such Fielding, et al. Expires May 23, 2007 [Page 49] Internet-Draft HTTP/1.1 November 2006 understanding is obviously desirable. However, applications MUST understand the class of any status code, as indicated by the first digit, and treat any unrecognized response as being equivalent to the x00 status code of that class, with the exception that an unrecognized response MUST NOT be cached. For example, if an unrecognized status code of 431 is received by the client, it can safely assume that there was something wrong with its request and treat the response as if it had received a 400 status code. In such cases, user agents SHOULD present to the user the entity returned with the response, since that entity is likely to include human- readable information which will explain the unusual status. 6.2. Response Header Fields The response-header fields allow the server to pass additional information about the response which cannot be placed in the Status- Line. These header fields give information about the server and about further access to the resource identified by the Request-URI. response-header = Accept-Ranges ; Section 14.5 | Age ; Section 14.6 | ETag ; Section 14.19 | Location ; Section 14.30 | Proxy-Authenticate ; Section 14.33 | Retry-After ; Section 14.37 | Server ; Section 14.38 | Vary ; Section 14.44 | WWW-Authenticate ; Section 14.47 Response-header field names can be extended reliably only in combination with a change in the protocol version. However, new or experimental header fields MAY be given the semantics of response- header fields if all parties in the communication recognize them to be response-header fields. Unrecognized header fields are treated as entity-header fields. Fielding, et al. Expires May 23, 2007 [Page 50] Internet-Draft HTTP/1.1 November 2006 7. Entity Request and Response messages MAY transfer an entity if not otherwise restricted by the request method or response status code. An entity consists of entity-header fields and an entity-body, although some responses will only include the entity-headers. In this section, both sender and recipient refer to either the client or the server, depending on who sends and who receives the entity. 7.1. Entity Header Fields Entity-header fields define metainformation about the entity-body or, if no body is present, about the resource identified by the request. Some of this metainformation is OPTIONAL; some might be REQUIRED by portions of this specification. entity-header = Allow ; Section 14.7 | Content-Encoding ; Section 14.11 | Content-Language ; Section 14.12 | Content-Length ; Section 14.13 | Content-Location ; Section 14.14 | Content-MD5 ; Section 14.15 | Content-Range ; Section 14.16 | Content-Type ; Section 14.17 | Expires ; Section 14.21 | Last-Modified ; Section 14.29 | extension-header extension-header = message-header The extension-header mechanism allows additional entity-header fields to be defined without changing the protocol, but these fields cannot be assumed to be recognizable by the recipient. Unrecognized header fields SHOULD be ignored by the recipient and MUST be forwarded by transparent proxies. 7.2. Entity Body The entity-body (if any) sent with an HTTP request or response is in a format and encoding defined by the entity-header fields. entity-body = *OCTET An entity-body is only present in a message when a message-body is present, as described in Section 4.3. The entity-body is obtained from the message-body by decoding any Transfer-Encoding that might have been applied to ensure safe and proper transfer of the message. Fielding, et al. Expires May 23, 2007 [Page 51] Internet-Draft HTTP/1.1 November 2006 7.2.1. Type When an entity-body is included with a message, the data type of that body is determined via the header fields Content-Type and Content- Encoding. These define a two-layer, ordered encoding model: entity-body := Content-Encoding( Content-Type( data ) ) Content-Type specifies the media type of the underlying data. Content-Encoding may be used to indicate any additional content codings applied to the data, usually for the purpose of data compression, that are a property of the requested resource. There is no default encoding. Any HTTP/1.1 message containing an entity-body SHOULD include a Content-Type header field defining the media type of that body. If and only if the media type is not given by a Content-Type field, the recipient MAY attempt to guess the media type via inspection of its content and/or the name extension(s) of the URI used to identify the resource. If the media type remains unknown, the recipient SHOULD treat it as type "application/octet-stream". 7.2.2. Entity Length The entity-length of a message is the length of the message-body before any transfer-codings have been applied. Section 4.4 defines how the transfer-length of a message-body is determined. Fielding, et al. Expires May 23, 2007 [Page 52] Internet-Draft HTTP/1.1 November 2006 8. Connections 8.1. Persistent Connections 8.1.1. Purpose Prior to persistent connections, a separate TCP connection was established to fetch each URL, increasing the load on HTTP servers and causing congestion on the Internet. The use of inline images and other associated data often require a client to make multiple requests of the same server in a short amount of time. Analysis of these performance problems and results from a prototype implementation are available [Pad1995] [Spero]. Implementation experience and measurements of actual HTTP/1.1 (RFC 2068) implementations show good results [Nie1997]. Alternatives have also been explored, for example, T/TCP [Tou1998]. Persistent HTTP connections have a number of advantages: o By opening and closing fewer TCP connections, CPU time is saved in routers and hosts (clients, servers, proxies, gateways, tunnels, or caches), and memory used for TCP protocol control blocks can be saved in hosts. o HTTP requests and responses can be pipelined on a connection. Pipelining allows a client to make multiple requests without waiting for each response, allowing a single TCP connection to be used much more efficiently, with much lower elapsed time. o Network congestion is reduced by reducing the number of packets caused by TCP opens, and by allowing TCP sufficient time to determine the congestion state of the network. o Latency on subsequent requests is reduced since there is no time spent in TCP's connection opening handshake. o HTTP can evolve more gracefully, since errors can be reported without the penalty of closing the TCP connection. Clients using future versions of HTTP might optimistically try a new feature, but if communicating with an older server, retry with old semantics after an error is reported. HTTP implementations SHOULD implement persistent connections. 8.1.2. Overall Operation A significant difference between HTTP/1.1 and earlier versions of HTTP is that persistent connections are the default behavior of any Fielding, et al. Expires May 23, 2007 [Page 53] Internet-Draft HTTP/1.1 November 2006 HTTP connection. That is, unless otherwise indicated, the client SHOULD assume that the server will maintain a persistent connection, even after error responses from the server. Persistent connections provide a mechanism by which a client and a server can signal the close of a TCP connection. This signaling takes place using the Connection header field (Section 14.10). Once a close has been signaled, the client MUST NOT send any more requests on that connection. 8.1.2.1. Negotiation An HTTP/1.1 server MAY assume that a HTTP/1.1 client intends to maintain a persistent connection unless a Connection header including the connection-token "close" was sent in the request. If the server chooses to close the connection immediately after sending the response, it SHOULD send a Connection header including the connection-token close. An HTTP/1.1 client MAY expect a connection to remain open, but would decide to keep it open based on whether the response from a server contains a Connection header with the connection-token close. In case the client does not want to maintain a connection for more than that request, it SHOULD send a Connection header including the connection-token close. If either the client or the server sends the close token in the Connection header, that request becomes the last one for the connection. Clients and servers SHOULD NOT assume that a persistent connection is maintained for HTTP versions less than 1.1 unless it is explicitly signaled. See Appendix F.2 for more information on backward compatibility with HTTP/1.0 clients. In order to remain persistent, all messages on the connection MUST have a self-defined message length (i.e., one not defined by closure of the connection), as described in Section 4.4. 8.1.2.2. Pipelining A client that supports persistent connections MAY "pipeline" its requests (i.e., send multiple requests without waiting for each response). A server MUST send its responses to those requests in the same order that the requests were received. Clients which assume persistent connections and pipeline immediately after connection establishment SHOULD be prepared to retry their Fielding, et al. Expires May 23, 2007 [Page 54] Internet-Draft HTTP/1.1 November 2006 connection if the first pipelined attempt fails. If a client does such a retry, it MUST NOT pipeline before it knows the connection is persistent. Clients MUST also be prepared to resend their requests if the server closes the connection before sending all of the corresponding responses. Clients SHOULD NOT pipeline requests using non-idempotent methods or non-idempotent sequences of methods (see Section 9.1.2). Otherwise, a premature termination of the transport connection could lead to indeterminate results. A client wishing to send a non-idempotent request SHOULD wait to send that request until it has received the response status for the previous request. 8.1.3. Proxy Servers It is especially important that proxies correctly implement the properties of the Connection header field as specified in Section 14.10. The proxy server MUST signal persistent connections separately with its clients and the origin servers (or other proxy servers) that it connects to. Each persistent connection applies to only one transport link. A proxy server MUST NOT establish a HTTP/1.1 persistent connection with an HTTP/1.0 client (but see [RFC2068] for information and discussion of the problems with the Keep-Alive header implemented by many HTTP/1.0 clients). 8.1.4. Practical Considerations Servers will usually have some time-out value beyond which they will no longer maintain an inactive connection. Proxy servers might make this a higher value since it is likely that the client will be making more connections through the same server. The use of persistent connections places no requirements on the length (or existence) of this time-out for either the client or the server. When a client or server wishes to time-out it SHOULD issue a graceful close on the transport connection. Clients and servers SHOULD both constantly watch for the other side of the transport close, and respond to it as appropriate. If a client or server does not detect the other side's close promptly it could cause unnecessary resource drain on the network. A client, server, or proxy MAY close the transport connection at any time. For example, a client might have started to send a new request at the same time that the server has decided to close the "idle" Fielding, et al. Expires May 23, 2007 [Page 55] Internet-Draft HTTP/1.1 November 2006 connection. From the server's point of view, the connection is being closed while it was idle, but from the client's point of view, a request is in progress. This means that clients, servers, and proxies MUST be able to recover from asynchronous close events. Client software SHOULD reopen the transport connection and retransmit the aborted sequence of requests without user interaction so long as the request sequence is idempotent (see Section 9.1.2). Non-idempotent methods or sequences MUST NOT be automatically retried, although user agents MAY offer a human operator the choice of retrying the request(s). Confirmation by user-agent software with semantic understanding of the application MAY substitute for user confirmation. The automatic retry SHOULD NOT be repeated if the second sequence of requests fails. Servers SHOULD always respond to at least one request per connection, if at all possible. Servers SHOULD NOT close a connection in the middle of transmitting a response, unless a network or client failure is suspected. Clients that use persistent connections SHOULD limit the number of simultaneous connections that they maintain to a given server. A single-user client SHOULD NOT maintain more than 2 connections with any server or proxy. A proxy SHOULD use up to 2*N connections to another server or proxy, where N is the number of simultaneously active users. These guidelines are intended to improve HTTP response times and avoid congestion. 8.2. Message Transmission Requirements 8.2.1. Persistent Connections and Flow Control HTTP/1.1 servers SHOULD maintain persistent connections and use TCP's flow control mechanisms to resolve temporary overloads, rather than terminating connections with the expectation that clients will retry. The latter technique can exacerbate network congestion. 8.2.2. Monitoring Connections for Error Status Messages An HTTP/1.1 (or later) client sending a message-body SHOULD monitor the network connection for an error status while it is transmitting the request. If the client sees an error status, it SHOULD immediately cease transmitting the body. If the body is being sent using a "chunked" encoding (Section 3.6), a zero length chunk and empty trailer MAY be used to prematurely mark the end of the message. If the body was preceded by a Content-Length header, the client MUST close the connection. Fielding, et al. Expires May 23, 2007 [Page 56] Internet-Draft HTTP/1.1 November 2006 8.2.3. Use of the 100 (Continue) Status The purpose of the 100 (Continue) status (see Section 10.1.1) is to allow a client that is sending a request message with a request body to determine if the origin server is willing to accept the request (based on the request headers) before the client sends the request body. In some cases, it might either be inappropriate or highly inefficient for the client to send the body if the server will reject the message without looking at the body. Requirements for HTTP/1.1 clients: o If a client will wait for a 100 (Continue) response before sending the request body, it MUST send an Expect request-header field (Section 14.20) with the "100-continue" expectation. o A client MUST NOT send an Expect request-header field (Section 14.20) with the "100-continue" expectation if it does not intend to send a request body. Because of the presence of older implementations, the protocol allows ambiguous situations in which a client may send "Expect: 100- continue" without receiving either a 417 (Expectation Failed) status or a 100 (Continue) status. Therefore, when a client sends this header field to an origin server (possibly via a proxy) from which it has never seen a 100 (Continue) status, the client SHOULD NOT wait for an indefinite period before sending the request body. Requirements for HTTP/1.1 origin servers: o Upon receiving a request which includes an Expect request-header field with the "100-continue" expectation, an origin server MUST either respond with 100 (Continue) status and continue to read from the input stream, or respond with a final status code. The origin server MUST NOT wait for the request body before sending the 100 (Continue) response. If it responds with a final status code, it MAY close the transport connection or it MAY continue to read and discard the rest of the request. It MUST NOT perform the requested method if it returns a final status code. o An origin server SHOULD NOT send a 100 (Continue) response if the request message does not include an Expect request-header field with the "100-continue" expectation, and MUST NOT send a 100 (Continue) response if such a request comes from an HTTP/1.0 (or earlier) client. There is an exception to this rule: for compatibility with RFC 2068, a server MAY send a 100 (Continue) status in response to an HTTP/1.1 PUT or POST request that does not include an Expect request-header field with the "100-continue" Fielding, et al. Expires May 23, 2007 [Page 57] Internet-Draft HTTP/1.1 November 2006 expectation. This exception, the purpose of which is to minimize any client processing delays associated with an undeclared wait for 100 (Continue) status, applies only to HTTP/1.1 requests, and not to requests with any other HTTP-version value. o An origin server MAY omit a 100 (Continue) response if it has already received some or all of the request body for the corresponding request. o An origin server that sends a 100 (Continue) response MUST ultimately send a final status code, once the request body is received and processed, unless it terminates the transport connection prematurely. o If an origin server receives a request that does not include an Expect request-header field with the "100-continue" expectation, the request includes a request body, and the server responds with a final status code before reading the entire request body from the transport connection, then the server SHOULD NOT close the transport connection until it has read the entire request, or until the client closes the connection. Otherwise, the client might not reliably receive the response message. However, this requirement is not be construed as preventing a server from defending itself against denial-of-service attacks, or from badly broken client implementations. Requirements for HTTP/1.1 proxies: o If a proxy receives a request that includes an Expect request- header field with the "100-continue" expectation, and the proxy either knows that the next-hop server complies with HTTP/1.1 or higher, or does not know the HTTP version of the next-hop server, it MUST forward the request, including the Expect header field. o If the proxy knows that the version of the next-hop server is HTTP/1.0 or lower, it MUST NOT forward the request, and it MUST respond with a 417 (Expectation Failed) status. o Proxies SHOULD maintain a cache recording the HTTP version numbers received from recently-referenced next-hop servers. o A proxy MUST NOT forward a 100 (Continue) response if the request message was received from an HTTP/1.0 (or earlier) client and did not include an Expect request-header field with the "100-continue" expectation. This requirement overrides the general rule for forwarding of 1xx responses (see Section 10.1). Fielding, et al. Expires May 23, 2007 [Page 58] Internet-Draft HTTP/1.1 November 2006 8.2.4. Client Behavior if Server Prematurely Closes Connection If an HTTP/1.1 client sends a request which includes a request body, but which does not include an Expect request-header field with the "100-continue" expectation, and if the client is not directly connected to an HTTP/1.1 origin server, and if the client sees the connection close before receiving any status from the server, the client SHOULD retry the request. If the client does retry this request, it MAY use the following "binary exponential backoff" algorithm to be assured of obtaining a reliable response: 1. Initiate a new connection to the server 2. Transmit the request-headers 3. Initialize a variable R to the estimated round-trip time to the server (e.g., based on the time it took to establish the connection), or to a constant value of 5 seconds if the round- trip time is not available. 4. Compute T = R * (2**N), where N is the number of previous retries of this request. 5. Wait either for an error response from the server, or for T seconds (whichever comes first) 6. If no error response is received, after T seconds transmit the body of the request. 7. If client sees that the connection is closed prematurely, repeat from step 1 until the request is accepted, an error response is received, or the user becomes impatient and terminates the retry process. If at any point an error status is received, the client o SHOULD NOT continue and o SHOULD close the connection if it has not completed sending the request message. Fielding, et al. Expires May 23, 2007 [Page 59] Internet-Draft HTTP/1.1 November 2006 9. Method Definitions The set of common methods for HTTP/1.1 is defined below. Although this set can be expanded, additional methods cannot be assumed to share the same semantics for separately extended clients and servers. The Host request-header field (Section 14.23) MUST accompany all HTTP/1.1 requests. 9.1. Safe and Idempotent Methods 9.1.1. Safe Methods Implementors should be aware that the software represents the user in their interactions over the Internet, and should be careful to allow the user to be aware of any actions they might take which may have an unexpected significance to themselves or others. In particular, the convention has been established that the GET and HEAD methods SHOULD NOT have the significance of taking an action other than retrieval. These methods ought to be considered "safe". This allows user agents to represent other methods, such as POST, PUT and DELETE, in a special way, so that the user is made aware of the fact that a possibly unsafe action is being requested. Naturally, it is not possible to ensure that the server does not generate side-effects as a result of performing a GET request; in fact, some dynamic resources consider that a feature. The important distinction here is that the user did not request the side-effects, so therefore cannot be held accountable for them. 9.1.2. Idempotent Methods Methods can also have the property of "idempotence" in that (aside from error or expiration issues) the side-effects of N > 0 identical requests is the same as for a single request. The methods GET, HEAD, PUT and DELETE share this property. Also, the methods OPTIONS and TRACE SHOULD NOT have side effects, and so are inherently idempotent. However, it is possible that a sequence of several requests is non- idempotent, even if all of the methods executed in that sequence are idempotent. (A sequence is idempotent if a single execution of the entire sequence always yields a result that is not changed by a reexecution of all, or part, of that sequence.) For example, a sequence is non-idempotent if its result depends on a value that is later modified in the same sequence. A sequence that never has side effects is idempotent, by definition (provided that no concurrent operations are being executed on the Fielding, et al. Expires May 23, 2007 [Page 60] Internet-Draft HTTP/1.1 November 2006 same set of resources). 9.2. OPTIONS The OPTIONS method represents a request for information about the communication options available on the request/response chain identified by the Request-URI. This method allows the client to determine the options and/or requirements associated with a resource, or the capabilities of a server, without implying a resource action or initiating a resource retrieval. Responses to this method are not cacheable. If the OPTIONS request includes an entity-body (as indicated by the presence of Content-Length or Transfer-Encoding), then the media type MUST be indicated by a Content-Type field. Although this specification does not define any use for such a body, future extensions to HTTP might use the OPTIONS body to make more detailed queries on the server. A server that does not support such an extension MAY discard the request body. If the Request-URI is an asterisk ("*"), the OPTIONS request is intended to apply to the server in general rather than to a specific resource. Since a server's communication options typically depend on the resource, the "*" request is only useful as a "ping" or "no-op" type of method; it does nothing beyond allowing the client to test the capabilities of the server. For example, this can be used to test a proxy for HTTP/1.1 compliance (or lack thereof). If the Request-URI is not an asterisk, the OPTIONS request applies only to the options that are available when communicating with that resource. A 200 response SHOULD include any header fields that indicate optional features implemented by the server and applicable to that resource (e.g., Allow), possibly including extensions not defined by this specification. The response body, if any, SHOULD also include information about the communication options. The format for such a body is not defined by this specification, but might be defined by future extensions to HTTP. Content negotiation MAY be used to select the appropriate response format. If no response body is included, the response MUST include a Content-Length field with a field-value of "0". The Max-Forwards request-header field MAY be used to target a specific proxy in the request chain. When a proxy receives an OPTIONS request on an absoluteURI for which request forwarding is permitted, the proxy MUST check for a Max-Forwards field. If the Fielding, et al. Expires May 23, 2007 [Page 61] Internet-Draft HTTP/1.1 November 2006 Max-Forwards field-value is zero ("0"), the proxy MUST NOT forward the message; instead, the proxy SHOULD respond with its own communication options. If the Max-Forwards field-value is an integer greater than zero, the proxy MUST decrement the field-value when it forwards the request. If no Max-Forwards field is present in the request, then the forwarded request MUST NOT include a Max-Forwards field. 9.3. GET The GET method means retrieve whatever information (in the form of an entity) is identified by the Request-URI. If the Request-URI refers to a data-producing process, it is the produced data which shall be returned as the entity in the response and not the source text of the process, unless that text happens to be the output of the process. The semantics of the GET method change to a "conditional GET" if the request message includes an If-Modified-Since, If-Unmodified-Since, If-Match, If-None-Match, or If-Range header field. A conditional GET method requests that the entity be transferred only under the circumstances described by the conditional header field(s). The conditional GET method is intended to reduce unnecessary network usage by allowing cached entities to be refreshed without requiring multiple requests or transferring data already held by the client. The semantics of the GET method change to a "partial GET" if the request message includes a Range header field. A partial GET requests that only part of the entity be transferred, as described in Section 14.35. The partial GET method is intended to reduce unnecessary network usage by allowing partially-retrieved entities to be completed without transferring data already held by the client. The response to a GET request is cacheable if and only if it meets the requirements for HTTP caching described in Section 13. See Section 15.1.3 for security considerations when used for forms. 9.4. HEAD The HEAD method is identical to GET except that the server MUST NOT return a message-body in the response. The metainformation contained in the HTTP headers in response to a HEAD request SHOULD be identical to the information sent in response to a GET request. This method can be used for obtaining metainformation about the entity implied by the request without transferring the entity-body itself. This method is often used for testing hypertext links for validity, accessibility, and recent modification. Fielding, et al. Expires May 23, 2007 [Page 62] Internet-Draft HTTP/1.1 November 2006 The response to a HEAD request MAY be cacheable in the sense that the information contained in the response MAY be used to update a previously cached entity from that resource. If the new field values indicate that the cached entity differs from the current entity (as would be indicated by a change in Content-Length, Content-MD5, ETag or Last-Modified), then the cache MUST treat the cache entry as stale. 9.5. POST The POST method is used to request that the origin server accept the entity enclosed in the request as data to be processed by the resource identified by the Request-URI in the Request-Line. POST is designed to allow a uniform method to cover the following functions: o Annotation of existing resources; o Posting a message to a bulletin board, newsgroup, mailing list, or similar group of articles; o Providing a block of data, such as the result of submitting a form, to a data-handling process; o Extending a database through an append operation. The actual function performed by the POST method is determined by the server and is usually dependent on the Request-URI. The action performed by the POST method might not result in a resource that can be identified by a URI. In this case, either 200 (OK) or 204 (No Content) is the appropriate response status, depending on whether or not the response includes an entity that describes the result. If a resource has been created on the origin server, the response SHOULD be 201 (Created) and contain an entity which describes the status of the request and refers to the new resource, and a Location header (see Section 14.30). Responses to this method are not cacheable, unless the response includes appropriate Cache-Control or Expires header fields. However, the 303 (See Other) response can be used to direct the user agent to retrieve a cacheable resource. POST requests MUST obey the message transmission requirements set out in Section 8.2. See Section 15.1.3 for security considerations. Fielding, et al. Expires May 23, 2007 [Page 63] Internet-Draft HTTP/1.1 November 2006 9.6. PUT The PUT method requests that the enclosed entity be stored under the supplied Request-URI. If the Request-URI refers to an already existing resource, the enclosed entity SHOULD be considered as a modified version of the one residing on the origin server. If the Request-URI does not point to an existing resource, and that URI is capable of being defined as a new resource by the requesting user agent, the origin server can create the resource with that URI. If a new resource is created, the origin server MUST inform the user agent via the 201 (Created) response. If an existing resource is modified, either the 200 (OK) or 204 (No Content) response codes SHOULD be sent to indicate successful completion of the request. If the resource could not be created or modified with the Request-URI, an appropriate error response SHOULD be given that reflects the nature of the problem. The recipient of the entity MUST NOT ignore any Content-* (e.g. Content-Range) headers that it does not understand or implement and MUST return a 501 (Not Implemented) response in such cases. If the request passes through a cache and the Request-URI identifies one or more currently cached entities, those entries SHOULD be treated as stale. Responses to this method are not cacheable. The fundamental difference between the POST and PUT requests is reflected in the different meaning of the Request-URI. The URI in a POST request identifies the resource that will handle the enclosed entity. That resource might be a data-accepting process, a gateway to some other protocol, or a separate entity that accepts annotations. In contrast, the URI in a PUT request identifies the entity enclosed with the request -- the user agent knows what URI is intended and the server MUST NOT attempt to apply the request to some other resource. If the server desires that the request be applied to a different URI, it MUST send a 301 (Moved Permanently) response; the user agent MAY then make its own decision regarding whether or not to redirect the request. A single resource MAY be identified by many different URIs. For example, an article might have a URI for identifying "the current version" which is separate from the URI identifying each particular version. In this case, a PUT request on a general URI might result in several other URIs being defined by the origin server. HTTP/1.1 does not define how a PUT method affects the state of an origin server. PUT requests MUST obey the message transmission requirements set out in Section 8.2. Fielding, et al. Expires May 23, 2007 [Page 64] Internet-Draft HTTP/1.1 November 2006 Unless otherwise specified for a particular entity-header, the entity-headers in the PUT request SHOULD be applied to the resource created or modified by the PUT. 9.7. DELETE The DELETE method requests that the origin server delete the resource identified by the Request-URI. This method MAY be overridden by human intervention (or other means) on the origin server. The client cannot be guaranteed that the operation has been carried out, even if the status code returned from the origin server indicates that the action has been completed successfully. However, the server SHOULD NOT indicate success unless, at the time the response is given, it intends to delete the resource or move it to an inaccessible location. A successful response SHOULD be 200 (OK) if the response includes an entity describing the status, 202 (Accepted) if the action has not yet been enacted, or 204 (No Content) if the action has been enacted but the response does not include an entity. If the request passes through a cache and the Request-URI identifies one or more currently cached entities, those entries SHOULD be treated as stale. Responses to this method are not cacheable. 9.8. TRACE The TRACE method is used to invoke a remote, application-layer loop- back of the request message. The final recipient of the request SHOULD reflect the message received back to the client as the entity- body of a 200 (OK) response. The final recipient is either the origin server or the first proxy or gateway to receive a Max-Forwards value of zero (0) in the request (see Section 14.31). A TRACE request MUST NOT include an entity. TRACE allows the client to see what is being received at the other end of the request chain and use that data for testing or diagnostic information. The value of the Via header field (Section 14.45) is of particular interest, since it acts as a trace of the request chain. Use of the Max-Forwards header field allows the client to limit the length of the request chain, which is useful for testing a chain of proxies forwarding messages in an infinite loop. If the request is valid, the response SHOULD contain the entire request message in the entity-body, with a Content-Type of "message/ http". Responses to this method MUST NOT be cached. Fielding, et al. Expires May 23, 2007 [Page 65] Internet-Draft HTTP/1.1 November 2006 9.9. CONNECT This specification reserves the method name CONNECT for use with a proxy that can dynamically switch to being a tunnel (e.g. SSL tunneling [Luo1998]). Fielding, et al. Expires May 23, 2007 [Page 66] Internet-Draft HTTP/1.1 November 2006 10. Status Code Definitions Each Status-Code is described below, including a description of which method(s) it can follow and any metainformation required in the response. 10.1. Informational 1xx This class of status code indicates a provisional response, consisting only of the Status-Line and optional headers, and is terminated by an empty line. There are no required headers for this class of status code. Since HTTP/1.0 did not define any 1xx status codes, servers MUST NOT send a 1xx response to an HTTP/1.0 client except under experimental conditions. A client MUST be prepared to accept one or more 1xx status responses prior to a regular response, even if the client does not expect a 100 (Continue) status message. Unexpected 1xx status responses MAY be ignored by a user agent. Proxies MUST forward 1xx responses, unless the connection between the proxy and its client has been closed, or unless the proxy itself requested the generation of the 1xx response. (For example, if a proxy adds a "Expect: 100-continue" field when it forwards a request, then it need not forward the corresponding 100 (Continue) response(s).) 10.1.1. 100 Continue The client SHOULD continue with its request. This interim response is used to inform the client that the initial part of the request has been received and has not yet been rejected by the server. The client SHOULD continue by sending the remainder of the request or, if the request has already been completed, ignore this response. The server MUST send a final response after the request has been completed. See Section 8.2.3 for detailed discussion of the use and handling of this status code. 10.1.2. 101 Switching Protocols The server understands and is willing to comply with the client's request, via the Upgrade message header field (Section 14.42), for a change in the application protocol being used on this connection. The server will switch protocols to those defined by the response's Upgrade header field immediately after the empty line which terminates the 101 response. The protocol SHOULD be switched only when it is advantageous to do Fielding, et al. Expires May 23, 2007 [Page 67] Internet-Draft HTTP/1.1 November 2006 so. For example, switching to a newer version of HTTP is advantageous over older versions, and switching to a real-time, synchronous protocol might be advantageous when delivering resources that use such features. 10.2. Successful 2xx This class of status code indicates that the client's request was successfully received, understood, and accepted. 10.2.1. 200 OK The request has succeeded. The information returned with the response is dependent on the method used in the request, for example: GET an entity corresponding to the requested resource is sent in the response; HEAD the entity-header fields corresponding to the requested resource are sent in the response without any message-body; POST an entity describing or containing the result of the action; TRACE an entity containing the request message as received by the end server. 10.2.2. 201 Created The request has been fulfilled and resulted in a new resource being created. The newly created resource can be referenced by the URI(s) returned in the entity of the response, with the most specific URI for the resource given by a Location header field. The response SHOULD include an entity containing a list of resource characteristics and location(s) from which the user or user agent can choose the one most appropriate. The entity format is specified by the media type given in the Content-Type header field. The origin server MUST create the resource before returning the 201 status code. If the action cannot be carried out immediately, the server SHOULD respond with 202 (Accepted) response instead. A 201 response MAY contain an ETag response header field indicating the current value of the entity tag for the requested variant just created, see Section 14.19. 10.2.3. 202 Accepted The request has been accepted for processing, but the processing has not been completed. The request might or might not eventually be Fielding, et al. Expires May 23, 2007 [Page 68] Internet-Draft HTTP/1.1 November 2006 acted upon, as it might be disallowed when processing actually takes place. There is no facility for re-sending a status code from an asynchronous operation such as this. The 202 response is intentionally non-committal. Its purpose is to allow a server to accept a request for some other process (perhaps a batch-oriented process that is only run once per day) without requiring that the user agent's connection to the server persist until the process is completed. The entity returned with this response SHOULD include an indication of the request's current status and either a pointer to a status monitor or some estimate of when the user can expect the request to be fulfilled. 10.2.4. 203 Non-Authoritative Information The returned metainformation in the entity-header is not the definitive set as available from the origin server, but is gathered from a local or a third-party copy. The set presented MAY be a subset or superset of the original version. For example, including local annotation information about the resource might result in a superset of the metainformation known by the origin server. Use of this response code is not required and is only appropriate when the response would otherwise be 200 (OK). 10.2.5. 204 No Content The server has fulfilled the request but does not need to return an entity-body, and might want to return updated metainformation. The response MAY include new or updated metainformation in the form of entity-headers, which if present SHOULD be associated with the requested variant. If the client is a user agent, it SHOULD NOT change its document view from that which caused the request to be sent. This response is primarily intended to allow input for actions to take place without causing a change to the user agent's active document view, although any new or updated metainformation SHOULD be applied to the document currently in the user agent's active view. The 204 response MUST NOT include a message-body, and thus is always terminated by the first empty line after the header fields. 10.2.6. 205 Reset Content The server has fulfilled the request and the user agent SHOULD reset the document view which caused the request to be sent. This response is primarily intended to allow input for actions to take place via user input, followed by a clearing of the form in which the input is Fielding, et al. Expires May 23, 2007 [Page 69] Internet-Draft HTTP/1.1 November 2006 given so that the user can easily initiate another input action. The response MUST NOT include an entity. 10.2.7. 206 Partial Content The server has fulfilled the partial GET request for the resource. The request MUST have included a Range header field (Section 14.35) indicating the desired range, and MAY have included an If-Range header field (Section 14.27) to make the request conditional. The response MUST include the following header fields: o Either a Content-Range header field (Section 14.16) indicating the range included with this response, or a multipart/byteranges Content-Type including Content-Range fields for each part. If a Content-Length header field is present in the response, its value MUST match the actual number of OCTETs transmitted in the message- body. o Date o ETag and/or Content-Location, if the header would have been sent in a 200 response to the same request o Expires, Cache-Control, and/or Vary, if the field-value might differ from that sent in any previous response for the same variant If the 206 response is the result of an If-Range request, the response SHOULD NOT include other entity-headers. Otherwise, the response MUST include all of the entity-headers that would have been returned with a 200 (OK) response to the same request. A cache MUST NOT combine a 206 response with other previously cached content if the ETag or Last-Modified headers do not match exactly, see 13.5.4. A cache that does not support the Range and Content-Range headers MUST NOT cache 206 (Partial) responses. 10.3. Redirection 3xx This class of status code indicates that further action needs to be taken by the user agent in order to fulfill the request. The action required MAY be carried out by the user agent without interaction with the user if and only if the method used in the second request is GET or HEAD. A client SHOULD detect infinite redirection loops, since such loops generate network traffic for each redirection. Fielding, et al. Expires May 23, 2007 [Page 70] Internet-Draft HTTP/1.1 November 2006 Note: previous versions of this specification recommended a maximum of five redirections. Content developers should be aware that there might be clients that implement such a fixed limitation. 10.3.1. 300 Multiple Choices The requested resource corresponds to any one of a set of representations, each with its own specific location, and agent- driven negotiation information (Section 12) is being provided so that the user (or user agent) can select a preferred representation and redirect its request to that location. Unless it was a HEAD request, the response SHOULD include an entity containing a list of resource characteristics and location(s) from which the user or user agent can choose the one most appropriate. The entity format is specified by the media type given in the Content-Type header field. Depending upon the format and the capabilities of the user agent, selection of the most appropriate choice MAY be performed automatically. However, this specification does not define any standard for such automatic selection. If the server has a preferred choice of representation, it SHOULD include the specific URI for that representation in the Location field; user agents MAY use the Location field value for automatic redirection. This response is cacheable unless indicated otherwise. 10.3.2. 301 Moved Permanently The requested resource has been assigned a new permanent URI and any future references to this resource SHOULD use one of the returned URIs. Clients with link editing capabilities ought to automatically re-link references to the Request-URI to one or more of the new references returned by the server, where possible. This response is cacheable unless indicated otherwise. The new permanent URI SHOULD be given by the Location field in the response. Unless the request method was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s). If the 301 status code is received in response to a request method that is known to be "safe", as defined in Section 9.1.1, then the request MAY be automatically redirected by the user agent without confirmation. Otherwise, the user agent MUST NOT automatically redirect the request unless it can be confirmed by the user, since this might change the conditions under which the request was issued. Fielding, et al. Expires May 23, 2007 [Page 71] Internet-Draft HTTP/1.1 November 2006 Note: When automatically redirecting a POST request after receiving a 301 status code, some existing HTTP/1.0 user agents will erroneously change it into a GET request. 10.3.3. 302 Found The requested resource resides temporarily under a different URI. Since the redirection might be altered on occasion, the client SHOULD continue to use the Request-URI for future requests. This response is only cacheable if indicated by a Cache-Control or Expires header field. The temporary URI SHOULD be given by the Location field in the response. Unless the request method was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s). If the 302 status code is received in response to a request method that is known to be "safe", as defined in Section 9.1.1, then the request MAY be automatically redirected by the user agent without confirmation. Otherwise, the user agent MUST NOT automatically redirect the request unless it can be confirmed by the user, since this might change the conditions under which the request was issued. Note: RFC 1945 and RFC 2068 specify that the client is not allowed to change the method on the redirected request. However, most existing user agent implementations treat 302 as if it were a 303 response, performing a GET on the Location field-value regardless of the original request method. The status codes 303 and 307 have been added for servers that wish to make unambiguously clear which kind of reaction is expected of the client. 10.3.4. 303 See Other The response to the request can be found under a different URI and SHOULD be retrieved using a GET method on that resource. This method exists primarily to allow the output of a POST-activated script to redirect the user agent to a selected resource. The new URI is not a substitute reference for the originally requested resource. The 303 response MUST NOT be cached, but the response to the second (redirected) request might be cacheable. The different URI SHOULD be given by the Location field in the response. Unless the request method was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s). Fielding, et al. Expires May 23, 2007 [Page 72] Internet-Draft HTTP/1.1 November 2006 Note: Many pre-HTTP/1.1 user agents do not understand the 303 status. When interoperability with such clients is a concern, the 302 status code may be used instead, since most user agents react to a 302 response as described here for 303. 10.3.5. 304 Not Modified If the client has performed a conditional GET request and access is allowed, but the document has not been modified, the server SHOULD respond with this status code. The 304 response MUST NOT contain a message-body, and thus is always terminated by the first empty line after the header fields. The response MUST include the following header fields: o Date, unless its omission is required by Section 14.18.1 If a clockless origin server obeys these rules, and proxies and clients add their own Date to any response received without one (as already specified by [RFC2068], Section 14.19), caches will operate correctly. o ETag and/or Content-Location, if the header would have been sent in a 200 response to the same request o Expires, Cache-Control, and/or Vary, if the field-value might differ from that sent in any previous response for the same variant If the conditional GET used a strong cache validator (see Section 13.3.3), the response SHOULD NOT include other entity- headers. Otherwise (i.e., the conditional GET used a weak validator), the response MUST NOT include other entity-headers; this prevents inconsistencies between cached entity-bodies and updated headers. If a 304 response indicates an entity not currently cached, then the cache MUST disregard the response and repeat the request without the conditional. If a cache uses a received 304 response to update a cache entry, the cache MUST update the entry to reflect any new field values given in the response. 10.3.6. 305 Use Proxy The requested resource MUST be accessed through the proxy given by the Location field. The Location field gives the URI of the proxy. Fielding, et al. Expires May 23, 2007 [Page 73] Internet-Draft HTTP/1.1 November 2006 The recipient is expected to repeat this single request via the proxy. 305 responses MUST only be generated by origin servers. Note: RFC 2068 was not clear that 305 was intended to redirect a single request, and to be generated by origin servers only. Not observing these limitations has significant security consequences. 10.3.7. 306 (Unused) The 306 status code was used in a previous version of the specification, is no longer used, and the code is reserved. 10.3.8. 307 Temporary Redirect The requested resource resides temporarily under a different URI. Since the redirection MAY be altered on occasion, the client SHOULD continue to use the Request-URI for future requests. This response is only cacheable if indicated by a Cache-Control or Expires header field. The temporary URI SHOULD be given by the Location field in the response. Unless the request method was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s) , since many pre-HTTP/1.1 user agents do not understand the 307 status. Therefore, the note SHOULD contain the information necessary for a user to repeat the original request on the new URI. If the 307 status code is received in response to a request method that is known to be "safe", as defined in Section 9.1.1, then the request MAY be automatically redirected by the user agent without confirmation. Otherwise, the user agent MUST NOT automatically redirect the request unless it can be confirmed by the user, since this might change the conditions under which the request was issued. 10.4. Client Error 4xx The 4xx class of status code is intended for cases in which the client seems to have erred. Except when responding to a HEAD request, the server SHOULD include an entity containing an explanation of the error situation, and whether it is a temporary or permanent condition. These status codes are applicable to any request method. User agents SHOULD display any included entity to the user. If the client is sending data, a server implementation using TCP SHOULD be careful to ensure that the client acknowledges receipt of the packet(s) containing the response, before the server closes the Fielding, et al. Expires May 23, 2007 [Page 74] Internet-Draft HTTP/1.1 November 2006 input connection. If the client continues sending data to the server after the close, the server's TCP stack will send a reset packet to the client, which may erase the client's unacknowledged input buffers before they can be read and interpreted by the HTTP application. 10.4.1. 400 Bad Request The request could not be understood by the server due to malformed syntax. The client SHOULD NOT repeat the request without modifications. 10.4.2. 401 Unauthorized The request requires user authentication. The response MUST include a WWW-Authenticate header field (Section 14.47) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (Section 14.8). If the request already included Authorization credentials, then the 401 response indicates that authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was given in the response, since that entity might include relevant diagnostic information. HTTP access authentication is explained in "HTTP Authentication: Basic and Digest Access Authentication" [RFC2617]. 10.4.3. 402 Payment Required This code is reserved for future use. 10.4.4. 403 Forbidden The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. If the server does not wish to make this information available to the client, the status code 404 (Not Found) can be used instead. 10.4.5. 404 Not Found The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. Fielding, et al. Expires May 23, 2007 [Page 75] Internet-Draft HTTP/1.1 November 2006 This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable. 10.4.6. 405 Method Not Allowed The method specified in the Request-Line is not allowed for the resource identified by the Request-URI. The response MUST include an Allow header containing a list of valid methods for the requested resource. 10.4.7. 406 Not Acceptable The resource identified by the request is only capable of generating response entities which have content characteristics not acceptable according to the accept headers sent in the request. Unless it was a HEAD request, the response SHOULD include an entity containing a list of available entity characteristics and location(s) from which the user or user agent can choose the one most appropriate. The entity format is specified by the media type given in the Content-Type header field. Depending upon the format and the capabilities of the user agent, selection of the most appropriate choice MAY be performed automatically. However, this specification does not define any standard for such automatic selection. Note: HTTP/1.1 servers are allowed to return responses which are not acceptable according to the accept headers sent in the request. In some cases, this may even be preferable to sending a 406 response. User agents are encouraged to inspect the headers of an incoming response to determine if it is acceptable. If the response could be unacceptable, a user agent SHOULD temporarily stop receipt of more data and query the user for a decision on further actions. 10.4.8. 407 Proxy Authentication Required This code is similar to 401 (Unauthorized), but indicates that the client must first authenticate itself with the proxy. The proxy MUST return a Proxy-Authenticate header field (Section 14.33) containing a challenge applicable to the proxy for the requested resource. The client MAY repeat the request with a suitable Proxy-Authorization header field (Section 14.34). HTTP access authentication is explained in "HTTP Authentication: Basic and Digest Access Authentication" [RFC2617]. Fielding, et al. Expires May 23, 2007 [Page 76] Internet-Draft HTTP/1.1 November 2006 10.4.9. 408 Request Timeout The client did not produce a request within the time that the server was prepared to wait. The client MAY repeat the request without modifications at any later time. 10.4.10. 409 Conflict The request could not be completed due to a conflict with the current state of the resource. This code is only allowed in situations where it is expected that the user might be able to resolve the conflict and resubmit the request. The response body SHOULD include enough information for the user to recognize the source of the conflict. Ideally, the response entity would include enough information for the user or user agent to fix the problem; however, that might not be possible and is not required. Conflicts are most likely to occur in response to a PUT request. For example, if versioning were being used and the entity being PUT included changes to a resource which conflict with those made by an earlier (third-party) request, the server might use the 409 response to indicate that it can't complete the request. In this case, the response entity would likely contain a list of the differences between the two versions in a format defined by the response Content- Type. 10.4.11. 410 Gone The requested resource is no longer available at the server and no forwarding address is known. This condition is expected to be considered permanent. Clients with link editing capabilities SHOULD delete references to the Request-URI after user approval. If the server does not know, or has no facility to determine, whether or not the condition is permanent, the status code 404 (Not Found) SHOULD be used instead. This response is cacheable unless indicated otherwise. The 410 response is primarily intended to assist the task of web maintenance by notifying the recipient that the resource is intentionally unavailable and that the server owners desire that remote links to that resource be removed. Such an event is common for limited-time, promotional services and for resources belonging to individuals no longer working at the server's site. It is not necessary to mark all permanently unavailable resources as "gone" or to keep the mark for any length of time -- that is left to the discretion of the server owner. Fielding, et al. Expires May 23, 2007 [Page 77] Internet-Draft HTTP/1.1 November 2006 10.4.12. 411 Length Required The server refuses to accept the request without a defined Content- Length. The client MAY repeat the request if it adds a valid Content-Length header field containing the length of the message-body in the request message. 10.4.13. 412 Precondition Failed The precondition given in one or more of the request-header fields evaluated to false when it was tested on the server. This response code allows the client to place preconditions on the current resource metainformation (header field data) and thus prevent the requested method from being applied to a resource other than the one intended. 10.4.14. 413 Request Entity Too Large The server is refusing to process a request because the request entity is larger than the server is willing or able to process. The server MAY close the connection to prevent the client from continuing the request. If the condition is temporary, the server SHOULD include a Retry- After header field to indicate that it is temporary and after what time the client MAY try again. 10.4.15. 414 Request-URI Too Long The server is refusing to service the request because the Request-URI is longer than the server is willing to interpret. This rare condition is only likely to occur when a client has improperly converted a POST request to a GET request with long query information, when the client has descended into a URI "black hole" of redirection (e.g., a redirected URI prefix that points to a suffix of itself), or when the server is under attack by a client attempting to exploit security holes present in some servers using fixed-length buffers for reading or manipulating the Request-URI. 10.4.16. 415 Unsupported Media Type The server is refusing to service the request because the entity of the request is in a format not supported by the requested resource for the requested method. 10.4.17. 416 Requested Range Not Satisfiable A server SHOULD return a response with this status code if a request included a Range request-header field (Section 14.35), and none of Fielding, et al. Expires May 23, 2007 [Page 78] Internet-Draft HTTP/1.1 November 2006 the range-specifier values in this field overlap the current extent of the selected resource, and the request did not include an If-Range request-header field. (For byte-ranges, this means that the first- byte-pos of all of the byte-range-spec values were greater than the current length of the selected resource.) When this status code is returned for a byte-range request, the response SHOULD include a Content-Range entity-header field specifying the current length of the selected resource (see Section 14.16). This response MUST NOT use the multipart/byteranges content-type. 10.4.18. 417 Expectation Failed The expectation given in an Expect request-header field (see Section 14.20) could not be met by this server, or, if the server is a proxy, the server has unambiguous evidence that the request could not be met by the next-hop server. 10.5. Server Error 5xx Response status codes beginning with the digit "5" indicate cases in which the server is aware that it has erred or is incapable of performing the request. Except when responding to a HEAD request, the server SHOULD include an entity containing an explanation of the error situation, and whether it is a temporary or permanent condition. User agents SHOULD display any included entity to the user. These response codes are applicable to any request method. 10.5.1. 500 Internal Server Error The server encountered an unexpected condition which prevented it from fulfilling the request. 10.5.2. 501 Not Implemented The server does not support the functionality required to fulfill the request. This is the appropriate response when the server does not recognize the request method and is not capable of supporting it for any resource. 10.5.3. 502 Bad Gateway The server, while acting as a gateway or proxy, received an invalid response from the upstream server it accessed in attempting to fulfill the request. Fielding, et al. Expires May 23, 2007 [Page 79] Internet-Draft HTTP/1.1 November 2006 10.5.4. 503 Service Unavailable The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response. Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection. 10.5.5. 504 Gateway Timeout The server, while acting as a gateway or proxy, did not receive a timely response from the upstream server specified by the URI (e.g. HTTP, FTP, LDAP) or some other auxiliary server (e.g. DNS) it needed to access in attempting to complete the request. Note: Note to implementors: some deployed proxies are known to return 400 or 500 when DNS lookups time out. 10.5.6. 505 HTTP Version Not Supported The server does not support, or refuses to support, the HTTP protocol version that was used in the request message. The server is indicating that it is unable or unwilling to complete the request using the same major version as the client, as described in Section 3.1, other than with this error message. The response SHOULD contain an entity describing why that version is not supported and what other protocols are supported by that server. Fielding, et al. Expires May 23, 2007 [Page 80] Internet-Draft HTTP/1.1 November 2006 11. Access Authentication HTTP provides several OPTIONAL challenge-response authentication mechanisms which can be used by a server to challenge a client request and by a client to provide authentication information. The general framework for access authentication, and the specification of "basic" and "digest" authentication, are specified in "HTTP Authentication: Basic and Digest Access Authentication" [RFC2617]. This specification adopts the definitions of "challenge" and "credentials" from that specification. Fielding, et al. Expires May 23, 2007 [Page 81] Internet-Draft HTTP/1.1 November 2006 12. Content Negotiation Most HTTP responses include an entity which contains information for interpretation by a human user. Naturally, it is desirable to supply the user with the "best available" entity corresponding to the request. Unfortunately for servers and caches, not all users have the same preferences for what is "best," and not all user agents are equally capable of rendering all entity types. For that reason, HTTP has provisions for several mechanisms for "content negotiation" -- the process of selecting the best representation for a given response when there are multiple representations available. Note: This is not called "format negotiation" because the alternate representations may be of the same media type, but use different capabilities of that type, be in different languages, etc. Any response containing an entity-body MAY be subject to negotiation, including error responses. There are two kinds of content negotiation which are possible in HTTP: server-driven and agent-driven negotiation. These two kinds of negotiation are orthogonal and thus may be used separately or in combination. One method of combination, referred to as transparent negotiation, occurs when a cache uses the agent-driven negotiation information provided by the origin server in order to provide server- driven negotiation for subsequent requests. 12.1. Server-driven Negotiation If the selection of the best representation for a response is made by an algorithm located at the server, it is called server-driven negotiation. Selection is based on the available representations of the response (the dimensions over which it can vary; e.g. language, content-coding, etc.) and the contents of particular header fields in the request message or on other information pertaining to the request (such as the network address of the client). Server-driven negotiation is advantageous when the algorithm for selecting from among the available representations is difficult to describe to the user agent, or when the server desires to send its "best guess" to the client along with the first response (hoping to avoid the round-trip delay of a subsequent request if the "best guess" is good enough for the user). In order to improve the server's guess, the user agent MAY include request header fields (Accept, Accept-Language, Accept-Encoding, etc.) which describe its preferences for such a response. Fielding, et al. Expires May 23, 2007 [Page 82] Internet-Draft HTTP/1.1 November 2006 Server-driven negotiation has disadvantages: 1. It is impossible for the server to accurately determine what might be "best" for any given user, since that would require complete knowledge of both the capabilities of the user agent and the intended use for the response (e.g., does the user want to view it on screen or print it on paper?). 2. Having the user agent describe its capabilities in every request can be both very inefficient (given that only a small percentage of responses have multiple representations) and a potential violation of the user's privacy. 3. It complicates the implementation of an origin server and the algorithms for generating responses to a request. 4. It may limit a public cache's ability to use the same response for multiple user's requests. HTTP/1.1 includes the following request-header fields for enabling server-driven negotiation through description of user agent capabilities and user preferences: Accept (Section 14.1), Accept- Charset (Section 14.2), Accept-Encoding (Section 14.3), Accept- Language (Section 14.4), and User-Agent (Section 14.43). However, an origin server is not limited to these dimensions and MAY vary the response based on any aspect of the request, including information outside the request-header fields or within extension header fields not defined by this specification. The Vary header field can be used to express the parameters the server uses to select a representation that is subject to server- driven negotiation. See Section 13.6 for use of the Vary header field by caches and Section 14.44 for use of the Vary header field by servers. 12.2. Agent-driven Negotiation With agent-driven negotiation, selection of the best representation for a response is performed by the user agent after receiving an initial response from the origin server. Selection is based on a list of the available representations of the response included within the header fields or entity-body of the initial response, with each representation identified by its own URI. Selection from among the representations may be performed automatically (if the user agent is capable of doing so) or manually by the user selecting from a generated (possibly hypertext) menu. Agent-driven negotiation is advantageous when the response would vary Fielding, et al. Expires May 23, 2007 [Page 83] Internet-Draft HTTP/1.1 November 2006 over commonly-used dimensions (such as type, language, or encoding), when the origin server is unable to determine a user agent's capabilities from examining the request, and generally when public caches are used to distribute server load and reduce network usage. Agent-driven negotiation suffers from the disadvantage of needing a second request to obtain the best alternate representation. This second request is only efficient when caching is used. In addition, this specification does not define any mechanism for supporting automatic selection, though it also does not prevent any such mechanism from being developed as an extension and used within HTTP/1.1. HTTP/1.1 defines the 300 (Multiple Choices) and 406 (Not Acceptable) status codes for enabling agent-driven negotiation when the server is unwilling or unable to provide a varying response using server-driven negotiation. 12.3. Transparent Negotiation Transparent negotiation is a combination of both server-driven and agent-driven negotiation. When a cache is supplied with a form of the list of available representations of the response (as in agent- driven negotiation) and the dimensions of variance are completely understood by the cache, then the cache becomes capable of performing server-driven negotiation on behalf of the origin server for subsequent requests on that resource. Transparent negotiation has the advantage of distributing the negotiation work that would otherwise be required of the origin server and also removing the second request delay of agent-driven negotiation when the cache is able to correctly guess the right response. This specification does not define any mechanism for transparent negotiation, though it also does not prevent any such mechanism from being developed as an extension that could be used within HTTP/1.1. Fielding, et al. Expires May 23, 2007 [Page 84] Internet-Draft HTTP/1.1 November 2006 13. Caching in HTTP HTTP is typically used for distributed information systems, where performance can be improved by the use of response caches. The HTTP/1.1 protocol includes a number of elements intended to make caching work as well as possible. Because these elements are inextricable from other aspects of the protocol, and because they interact with each other, it is useful to describe the basic caching design of HTTP separately from the detailed descriptions of methods, headers, response codes, etc. Caching would be useless if it did not significantly improve performance. The goal of caching in HTTP/1.1 is to eliminate the need to send requests in many cases, and to eliminate the need to send full responses in many other cases. The former reduces the number of network round-trips required for many operations; we use an "expiration" mechanism for this purpose (see Section 13.2). The latter reduces network bandwidth requirements; we use a "validation" mechanism for this purpose (see Section 13.3). Requirements for performance, availability, and disconnected operation require us to be able to relax the goal of semantic transparency. The HTTP/1.1 protocol allows origin servers, caches, and clients to explicitly reduce transparency when necessary. However, because non-transparent operation may confuse non-expert users, and might be incompatible with certain server applications (such as those for ordering merchandise), the protocol requires that transparency be relaxed o only by an explicit protocol-level request when relaxed by client or origin server o only with an explicit warning to the end user when relaxed by cache or client Therefore, the HTTP/1.1 protocol provides these important elements: 1. Protocol features that provide full semantic transparency when this is required by all parties. 2. Protocol features that allow an origin server or user agent to explicitly request and control non-transparent operation. 3. Protocol features that allow a cache to attach warnings to responses that do not preserve the requested approximation of semantic transparency. A basic principle is that it must be possible for the clients to Fielding, et al. Expires May 23, 2007 [Page 85] Internet-Draft HTTP/1.1 November 2006 detect any potential relaxation of semantic transparency. Note: The server, cache, or client implementor might be faced with design decisions not explicitly discussed in this specification. If a decision might affect semantic transparency, the implementor ought to err on the side of maintaining transparency unless a careful and complete analysis shows significant benefits in breaking transparency. 13.1. 13.1.1. Cache Correctness A correct cache MUST respond to a request with the most up-to-date response held by the cache that is appropriate to the request (see Sections 13.2.5, 13.2.6, and 13.12) which meets one of the following conditions: 1. It has been checked for equivalence with what the origin server would have returned by revalidating the response with the origin server (Section 13.3); 2. It is "fresh enough" (see Section 13.2). In the default case, this means it meets the least restrictive freshness requirement of the client, origin server, and cache (see Section 14.9); if the origin server so specifies, it is the freshness requirement of the origin server alone. If a stored response is not "fresh enough" by the most restrictive freshness requirement of both the client and the origin server, in carefully considered circumstances the cache MAY still return the response with the appropriate Warning header (see Section 13.1.5 and 14.46), unless such a response is prohibited (e.g., by a "no-store" cache- directive, or by a "no-cache" cache-request-directive; see Section 14.9). 3. It is an appropriate 304 (Not Modified), 305 (Proxy Redirect), or error (4xx or 5xx) response message. If the cache can not communicate with the origin server, then a correct cache SHOULD respond as above if the response can be correctly served from the cache; if not it MUST return an error or warning indicating that there was a communication failure. If a cache receives a response (either an entire response, or a 304 (Not Modified) response) that it would normally forward to the requesting client, and the received response is no longer fresh, the cache SHOULD forward it to the requesting client without adding a new Warning (but without removing any existing Warning headers). A cache Fielding, et al. Expires May 23, 2007 [Page 86] Internet-Draft HTTP/1.1 November 2006 SHOULD NOT attempt to revalidate a response simply because that response became stale in transit; this might lead to an infinite loop. A user agent that receives a stale response without a Warning MAY display a warning indication to the user. 13.1.2. Warnings Whenever a cache returns a response that is neither first-hand nor "fresh enough" (in the sense of condition 2 in Section 13.1.1), it MUST attach a warning to that effect, using a Warning general-header. The Warning header and the currently defined warnings are described in Section 14.46. The warning allows clients to take appropriate action. Warnings MAY be used for other purposes, both cache-related and otherwise. The use of a warning, rather than an error status code, distinguish these responses from true failures. Warnings are assigned three digit warn-codes. The first digit indicates whether the Warning MUST or MUST NOT be deleted from a stored cache entry after a successful revalidation: 1xx Warnings that describe the freshness or revalidation status of the response, and so MUST be deleted after a successful revalidation. 1XX warn-codes MAY be generated by a cache only when validating a cached entry. It MUST NOT be generated by clients. 2xx Warnings that describe some aspect of the entity body or entity headers that is not rectified by a revalidation (for example, a lossy compression of the entity bodies) and which MUST NOT be deleted after a successful revalidation. See Section 14.46 for the definitions of the codes themselves. HTTP/1.0 caches will cache all Warnings in responses, without deleting the ones in the first category. Warnings in responses that are passed to HTTP/1.0 caches carry an extra warning-date field, which prevents a future HTTP/1.1 recipient from believing an erroneously cached Warning. Warnings also carry a warning text. The text MAY be in any appropriate natural language (perhaps based on the client's Accept headers), and include an OPTIONAL indication of what character set is used. Multiple warnings MAY be attached to a response (either by the origin server or by a cache), including multiple warnings with the same code number. For example, a server might provide the same warning with Fielding, et al. Expires May 23, 2007 [Page 87] Internet-Draft HTTP/1.1 November 2006 texts in both English and Basque. When multiple warnings are attached to a response, it might not be practical or reasonable to display all of them to the user. This version of HTTP does not specify strict priority rules for deciding which warnings to display and in what order, but does suggest some heuristics. 13.1.3. Cache-control Mechanisms The basic cache mechanisms in HTTP/1.1 (server-specified expiration times and validators) are implicit directives to caches. In some cases, a server or client might need to provide explicit directives to the HTTP caches. We use the Cache-Control header for this purpose. The Cache-Control header allows a client or server to transmit a variety of directives in either requests or responses. These directives typically override the default caching algorithms. As a general rule, if there is any apparent conflict between header values, the most restrictive interpretation is applied (that is, the one that is most likely to preserve semantic transparency). However, in some cases, cache-control directives are explicitly specified as weakening the approximation of semantic transparency (for example, "max-stale" or "public"). The cache-control directives are described in detail in Section 14.9. 13.1.4. Explicit User Agent Warnings Many user agents make it possible for users to override the basic caching mechanisms. For example, the user agent might allow the user to specify that cached entities (even explicitly stale ones) are never validated. Or the user agent might habitually add "Cache- Control: max-stale=3600" to every request. The user agent SHOULD NOT default to either non-transparent behavior, or behavior that results in abnormally ineffective caching, but MAY be explicitly configured to do so by an explicit action of the user. If the user has overridden the basic caching mechanisms, the user agent SHOULD explicitly indicate to the user whenever this results in the display of information that might not meet the server's transparency requirements (in particular, if the displayed entity is known to be stale). Since the protocol normally allows the user agent to determine if responses are stale or not, this indication need only be displayed when this actually happens. The indication need not be a dialog box; it could be an icon (for example, a picture of a rotting fish) or some other indicator. Fielding, et al. Expires May 23, 2007 [Page 88] Internet-Draft HTTP/1.1 November 2006 If the user has overridden the caching mechanisms in a way that would abnormally reduce the effectiveness of caches, the user agent SHOULD continually indicate this state to the user (for example, by a display of a picture of currency in flames) so that the user does not inadvertently consume excess resources or suffer from excessive latency. 13.1.5. Exceptions to the Rules and Warnings In some cases, the operator of a cache MAY choose to configure it to return stale responses even when not requested by clients. This decision ought not be made lightly, but may be necessary for reasons of availability or performance, especially when the cache is poorly connected to the origin server. Whenever a cache returns a stale response, it MUST mark it as such (using a Warning header) enabling the client software to alert the user that there might be a potential problem. It also allows the user agent to take steps to obtain a first-hand or fresh response. For this reason, a cache SHOULD NOT return a stale response if the client explicitly requests a first-hand or fresh one, unless it is impossible to comply for technical or policy reasons. 13.1.6. Client-controlled Behavior While the origin server (and to a lesser extent, intermediate caches, by their contribution to the age of a response) are the primary source of expiration information, in some cases the client might need to control a cache's decision about whether to return a cached response without validating it. Clients do this using several directives of the Cache-Control header. A client's request MAY specify the maximum age it is willing to accept of an unvalidated response; specifying a value of zero forces the cache(s) to revalidate all responses. A client MAY also specify the minimum time remaining before a response expires. Both of these options increase constraints on the behavior of caches, and so cannot further relax the cache's approximation of semantic transparency. A client MAY also specify that it will accept stale responses, up to some maximum amount of staleness. This loosens the constraints on the caches, and so might violate the origin server's specified constraints on semantic transparency, but might be necessary to support disconnected operation, or high availability in the face of poor connectivity. Fielding, et al. Expires May 23, 2007 [Page 89] Internet-Draft HTTP/1.1 November 2006 13.2. Expiration Model 13.2.1. Server-Specified Expiration HTTP caching works best when caches can entirely avoid making requests to the origin server. The primary mechanism for avoiding requests is for an origin server to provide an explicit expiration time in the future, indicating that a response MAY be used to satisfy subsequent requests. In other words, a cache can return a fresh response without first contacting the server. Our expectation is that servers will assign future explicit expiration times to responses in the belief that the entity is not likely to change, in a semantically significant way, before the expiration time is reached. This normally preserves semantic transparency, as long as the server's expiration times are carefully chosen. The expiration mechanism applies only to responses taken from a cache and not to first-hand responses forwarded immediately to the requesting client. If an origin server wishes to force a semantically transparent cache to validate every request, it MAY assign an explicit expiration time in the past. This means that the response is always stale, and so the cache SHOULD validate it before using it for subsequent requests. See Section 14.9.4 for a more restrictive way to force revalidation. If an origin server wishes to force any HTTP/1.1 cache, no matter how it is configured, to validate every request, it SHOULD use the "must- revalidate" cache-control directive (see Section 14.9). Servers specify explicit expiration times using either the Expires header, or the max-age directive of the Cache-Control header. An expiration time cannot be used to force a user agent to refresh its display or reload a resource; its semantics apply only to caching mechanisms, and such mechanisms need only check a resource's expiration status when a new request for that resource is initiated. See Section 13.13 for an explanation of the difference between caches and history mechanisms. 13.2.2. Heuristic Expiration Since origin servers do not always provide explicit expiration times, HTTP caches typically assign heuristic expiration times, employing algorithms that use other header values (such as the Last-Modified time) to estimate a plausible expiration time. The HTTP/1.1 Fielding, et al. Expires May 23, 2007 [Page 90] Internet-Draft HTTP/1.1 November 2006 specification does not provide specific algorithms, but does impose worst-case constraints on their results. Since heuristic expiration times might compromise semantic transparency, they ought to used cautiously, and we encourage origin servers to provide explicit expiration times as much as possible. 13.2.3. Age Calculations In order to know if a cached entry is fresh, a cache needs to know if its age exceeds its freshness lifetime. We discuss how to calculate the latter in Section 13.2.4; this section describes how to calculate the age of a response or cache entry. In this discussion, we use the term "now" to mean "the current value of the clock at the host performing the calculation." Hosts that use HTTP, but especially hosts running origin servers and caches, SHOULD use NTP [RFC1305] or some similar protocol to synchronize their clocks to a globally accurate time standard. HTTP/1.1 requires origin servers to send a Date header, if possible, with every response, giving the time at which the response was generated (see Section 14.18). We use the term "date_value" to denote the value of the Date header, in a form appropriate for arithmetic operations. HTTP/1.1 uses the Age response-header to convey the estimated age of the response message when obtained from a cache. The Age field value is the cache's estimate of the amount of time since the response was generated or revalidated by the origin server. In essence, the Age value is the sum of the time that the response has been resident in each of the caches along the path from the origin server, plus the amount of time it has been in transit along network paths. We use the term "age_value" to denote the value of the Age header, in a form appropriate for arithmetic operations. A response's age can be calculated in two entirely independent ways: 1. now minus date_value, if the local clock is reasonably well synchronized to the origin server's clock. If the result is negative, the result is replaced by zero. 2. age_value, if all of the caches along the response path implement HTTP/1.1. Given that we have two independent ways to compute the age of a Fielding, et al. Expires May 23, 2007 [Page 91] Internet-Draft HTTP/1.1 November 2006 response when it is received, we can combine these as corrected_received_age = max(now - date_value, age_value) and as long as we have either nearly synchronized clocks or all- HTTP/1.1 paths, one gets a reliable (conservative) result. Because of network-imposed delays, some significant interval might pass between the time that a server generates a response and the time it is received at the next outbound cache or client. If uncorrected, this delay could result in improperly low ages. Because the request that resulted in the returned Age value must have been initiated prior to that Age value's generation, we can correct for delays imposed by the network by recording the time at which the request was initiated. Then, when an Age value is received, it MUST be interpreted relative to the time the request was initiated, not the time that the response was received. This algorithm results in conservative behavior no matter how much delay is experienced. So, we compute: corrected_initial_age = corrected_received_age + (now - request_time) where "request_time" is the time (according to the local clock) when the request that elicited this response was sent. Summary of age calculation algorithm, when a cache receives a response: Fielding, et al. Expires May 23, 2007 [Page 92] Internet-Draft HTTP/1.1 November 2006 /* * age_value * is the value of Age: header received by the cache with * this response. * date_value * is the value of the origin server's Date: header * request_time * is the (local) time when the cache made the request * that resulted in this cached response * response_time * is the (local) time when the cache received the * response * now * is the current (local) time */ apparent_age = max(0, response_time - date_value); corrected_received_age = max(apparent_age, age_value); response_delay = response_time - request_time; corrected_initial_age = corrected_received_age + response_delay; resident_time = now - response_time; current_age = corrected_initial_age + resident_time; The current_age of a cache entry is calculated by adding the amount of time (in seconds) since the cache entry was last validated by the origin server to the corrected_initial_age. When a response is generated from a cache entry, the cache MUST include a single Age header field in the response with a value equal to the cache entry's current_age. The presence of an Age header field in a response implies that a response is not first-hand. However, the converse is not true, since the lack of an Age header field in a response does not imply that the response is first-hand unless all caches along the request path are compliant with HTTP/1.1 (i.e., older HTTP caches did not implement the Age header field). 13.2.4. Expiration Calculations In order to decide whether a response is fresh or stale, we need to compare its freshness lifetime to its age. The age is calculated as described in Section 13.2.3; this section describes how to calculate the freshness lifetime, and to determine if a response has expired. In the discussion below, the values can be represented in any form appropriate for arithmetic operations. We use the term "expires_value" to denote the value of the Expires header. We use the term "max_age_value" to denote an appropriate Fielding, et al. Expires May 23, 2007 [Page 93] Internet-Draft HTTP/1.1 November 2006 value of the number of seconds carried by the "max-age" directive of the Cache-Control header in a response (see Section 14.9.3). The max-age directive takes priority over Expires, so if max-age is present in a response, the calculation is simply: freshness_lifetime = max_age_value Otherwise, if Expires is present in the response, the calculation is: freshness_lifetime = expires_value - date_value Note that neither of these calculations is vulnerable to clock skew, since all of the information comes from the origin server. If none of Expires, Cache-Control: max-age, or Cache-Control: s-maxage (see Section 14.9.3) appears in the response, and the response does not include other restrictions on caching, the cache MAY compute a freshness lifetime using a heuristic. The cache MUST attach Warning 113 to any response whose age is more than 24 hours if such warning has not already been added. Also, if the response does have a Last-Modified time, the heuristic expiration value SHOULD be no more than some fraction of the interval since that time. A typical setting of this fraction might be 10%. The calculation to determine if a response has expired is quite simple: response_is_fresh = (freshness_lifetime > current_age) 13.2.5. Disambiguating Expiration Values Because expiration values are assigned optimistically, it is possible for two caches to contain fresh values for the same resource that are different. If a client performing a retrieval receives a non-first-hand response for a request that was already fresh in its own cache, and the Date header in its existing cache entry is newer than the Date on the new response, then the client MAY ignore the response. If so, it MAY retry the request with a "Cache-Control: max-age=0" directive (see Section 14.9), to force a check with the origin server. If a cache has two fresh responses for the same representation with different validators, it MUST use the one with the more recent Date header. This situation might arise because the cache is pooling responses from other caches, or because a client has asked for a Fielding, et al. Expires May 23, 2007 [Page 94] Internet-Draft HTTP/1.1 November 2006 reload or a revalidation of an apparently fresh cache entry. 13.2.6. Disambiguating Multiple Responses Because a client might be receiving responses via multiple paths, so that some responses flow through one set of caches and other responses flow through a different set of caches, a client might receive responses in an order different from that in which the origin server sent them. We would like the client to use the most recently generated response, even if older responses are still apparently fresh. Neither the entity tag nor the expiration value can impose an ordering on responses, since it is possible that a later response intentionally carries an earlier expiration time. The Date values are ordered to a granularity of one second. When a client tries to revalidate a cache entry, and the response it receives contains a Date header that appears to be older than the one for the existing entry, then the client SHOULD repeat the request unconditionally, and include Cache-Control: max-age=0 to force any intermediate caches to validate their copies directly with the origin server, or Cache-Control: no-cache to force any intermediate caches to obtain a new copy from the origin server. If the Date values are equal, then the client MAY use either response (or MAY, if it is being extremely prudent, request a new response). Servers MUST NOT depend on clients being able to choose deterministically between responses generated during the same second, if their expiration times overlap. 13.3. Validation Model When a cache has a stale entry that it would like to use as a response to a client's request, it first has to check with the origin server (or possibly an intermediate cache with a fresh response) to see if its cached entry is still usable. We call this "validating" the cache entry. Since we do not want to have to pay the overhead of retransmitting the full response if the cached entry is good, and we do not want to pay the overhead of an extra round trip if the cached entry is invalid, the HTTP/1.1 protocol supports the use of Fielding, et al. Expires May 23, 2007 [Page 95] Internet-Draft HTTP/1.1 November 2006 conditional methods. The key protocol features for supporting conditional methods are those concerned with "cache validators." When an origin server generates a full response, it attaches some sort of validator to it, which is kept with the cache entry. When a client (user agent or proxy cache) makes a conditional request for a resource for which it has a cache entry, it includes the associated validator in the request. The server then checks that validator against the current validator for the entity, and, if they match (see Section 13.3.3), it responds with a special status code (usually, 304 (Not Modified)) and no entity-body. Otherwise, it returns a full response (including entity-body). Thus, we avoid transmitting the full response if the validator matches, and we avoid an extra round trip if it does not match. In HTTP/1.1, a conditional request looks exactly the same as a normal request for the same resource, except that it carries a special header (which includes the validator) that implicitly turns the method (usually, GET) into a conditional. The protocol includes both positive and negative senses of cache- validating conditions. That is, it is possible to request either that a method be performed if and only if a validator matches or if and only if no validators match. Note: a response that lacks a validator may still be cached, and served from cache until it expires, unless this is explicitly prohibited by a cache-control directive. However, a cache cannot do a conditional retrieval if it does not have a validator for the entity, which means it will not be refreshable after it expires. 13.3.1. Last-Modified Dates The Last-Modified entity-header field value is often used as a cache validator. In simple terms, a cache entry is considered to be valid if the entity has not been modified since the Last-Modified value. 13.3.2. Entity Tag Cache Validators The ETag response-header field value, an entity tag, provides for an "opaque" cache validator. This might allow more reliable validation in situations where it is inconvenient to store modification dates, where the one-second resolution of HTTP date values is not sufficient, or where the origin server wishes to avoid certain paradoxes that might arise from the use of modification dates. Fielding, et al. Expires May 23, 2007 [Page 96] Internet-Draft HTTP/1.1 November 2006 Entity Tags are described in Section 3.11. The headers used with entity tags are described in Sections 14.19, 14.24, 14.26 and 14.44. 13.3.3. Weak and Strong Validators Since both origin servers and caches will compare two validators to decide if they represent the same or different entities, one normally would expect that if the entity (the entity-body or any entity- headers) changes in any way, then the associated validator would change as well. If this is true, then we call this validator a "strong validator." However, there might be cases when a server prefers to change the validator only on semantically significant changes, and not when insignificant aspects of the entity change. A validator that does not always change when the resource changes is a "weak validator." Entity tags are normally "strong validators," but the protocol provides a mechanism to tag an entity tag as "weak." One can think of a strong validator as one that changes whenever the bits of an entity changes, while a weak value changes whenever the meaning of an entity changes. Alternatively, one can think of a strong validator as part of an identifier for a specific entity, while a weak validator is part of an identifier for a set of semantically equivalent entities. Note: One example of a strong validator is an integer that is incremented in stable storage every time an entity is changed. An entity's modification time, if represented with one-second resolution, could be a weak validator, since it is possible that the resource might be modified twice during a single second. Support for weak validators is optional. However, weak validators allow for more efficient caching of equivalent objects; for example, a hit counter on a site is probably good enough if it is updated every few days or weeks, and any value during that period is likely "good enough" to be equivalent. A "use" of a validator is either when a client generates a request and includes the validator in a validating header field, or when a server compares two validators. Strong validators are usable in any context. Weak validators are only usable in contexts that do not depend on exact equality of an entity. For example, either kind is usable for a conditional GET of a full entity. However, only a strong validator is usable for a sub- range retrieval, since otherwise the client might end up with an Fielding, et al. Expires May 23, 2007 [Page 97] Internet-Draft HTTP/1.1 November 2006 internally inconsistent entity. Clients MAY issue simple (non-subrange) GET requests with either weak validators or strong validators. Clients MUST NOT use weak validators in other forms of request. The only function that the HTTP/1.1 protocol defines on validators is comparison. There are two validator comparison functions, depending on whether the comparison context allows the use of weak validators or not: o The strong comparison function: in order to be considered equal, both validators MUST be identical in every way, and both MUST NOT be weak. o The weak comparison function: in order to be considered equal, both validators MUST be identical in every way, but either or both of them MAY be tagged as "weak" without affecting the result. An entity tag is strong unless it is explicitly tagged as weak. Section 3.11 gives the syntax for entity tags. A Last-Modified time, when used as a validator in a request, is implicitly weak unless it is possible to deduce that it is strong, using the following rules: o The validator is being compared by an origin server to the actual current validator for the entity and, o That origin server reliably knows that the associated entity did not change twice during the second covered by the presented validator. or o The validator is about to be used by a client in an If-Modified- Since or If-Unmodified-Since header, because the client has a cache entry for the associated entity, and o That cache entry includes a Date value, which gives the time when the origin server sent the original response, and o The presented Last-Modified time is at least 60 seconds before the Date value. or Fielding, et al. Expires May 23, 2007 [Page 98] Internet-Draft HTTP/1.1 November 2006 o The validator is being compared by an intermediate cache to the validator stored in its cache entry for the entity, and o That cache entry includes a Date value, which gives the time when the origin server sent the original response, and o The presented Last-Modified time is at least 60 seconds before the Date value. This method relies on the fact that if two different responses were sent by the origin server during the same second, but both had the same Last-Modified time, then at least one of those responses would have a Date value equal to its Last-Modified time. The arbitrary 60- second limit guards against the possibility that the Date and Last- Modified values are generated from different clocks, or at somewhat different times during the preparation of the response. An implementation MAY use a value larger than 60 seconds, if it is believed that 60 seconds is too short. If a client wishes to perform a sub-range retrieval on a value for which it has only a Last-Modified time and no opaque validator, it MAY do this only if the Last-Modified time is strong in the sense described here. A cache or origin server receiving a conditional request, other than a full-body GET request, MUST use the strong comparison function to evaluate the condition. These rules allow HTTP/1.1 caches and clients to safely perform sub- range retrievals on values that have been obtained from HTTP/1.0 servers. 13.3.4. Rules for When to Use Entity Tags and Last-Modified Dates We adopt a set of rules and recommendations for origin servers, clients, and caches regarding when various validator types ought to be used, and for what purposes. HTTP/1.1 origin servers: o SHOULD send an entity tag validator unless it is not feasible to generate one. o MAY send a weak entity tag instead of a strong entity tag, if performance considerations support the use of weak entity tags, or if it is unfeasible to send a strong entity tag. Fielding, et al. Expires May 23, 2007 [Page 99] Internet-Draft HTTP/1.1 November 2006 o SHOULD send a Last-Modified value if it is feasible to send one, unless the risk of a breakdown in semantic transparency that could result from using this date in an If-Modified-Since header would lead to serious problems. In other words, the preferred behavior for an HTTP/1.1 origin server is to send both a strong entity tag and a Last-Modified value. In order to be legal, a strong entity tag MUST change whenever the associated entity value changes in any way. A weak entity tag SHOULD change whenever the associated entity changes in a semantically significant way. Note: in order to provide semantically transparent caching, an origin server must avoid reusing a specific strong entity tag value for two different entities, or reusing a specific weak entity tag value for two semantically different entities. Cache entries might persist for arbitrarily long periods, regardless of expiration times, so it might be inappropriate to expect that a cache will never again attempt to validate an entry using a validator that it obtained at some point in the past. HTTP/1.1 clients: o If an entity tag has been provided by the origin server, MUST use that entity tag in any cache-conditional request (using If-Match or If-None-Match). o If only a Last-Modified value has been provided by the origin server, SHOULD use that value in non-subrange cache-conditional requests (using If-Modified-Since). o If only a Last-Modified value has been provided by an HTTP/1.0 origin server, MAY use that value in subrange cache-conditional requests (using If-Unmodified-Since:). The user agent SHOULD provide a way to disable this, in case of difficulty. o If both an entity tag and a Last-Modified value have been provided by the origin server, SHOULD use both validators in cache- conditional requests. This allows both HTTP/1.0 and HTTP/1.1 caches to respond appropriately. An HTTP/1.1 origin server, upon receiving a conditional request that includes both a Last-Modified date (e.g., in an If-Modified-Since or If-Unmodified-Since header field) and one or more entity tags (e.g., in an If-Match, If-None-Match, or If-Range header field) as cache validators, MUST NOT return a response status of 304 (Not Modified) unless doing so is consistent with all of the conditional header Fielding, et al. Expires May 23, 2007 [Page 100] Internet-Draft HTTP/1.1 November 2006 fields in the request. An HTTP/1.1 caching proxy, upon receiving a conditional request that includes both a Last-Modified date and one or more entity tags as cache validators, MUST NOT return a locally cached response to the client unless that cached response is consistent with all of the conditional header fields in the request. Note: The general principle behind these rules is that HTTP/1.1 servers and clients should transmit as much non-redundant information as is available in their responses and requests. HTTP/1.1 systems receiving this information will make the most conservative assumptions about the validators they receive. HTTP/1.0 clients and caches will ignore entity tags. Generally, last-modified values received or used by these systems will support transparent and efficient caching, and so HTTP/1.1 origin servers should provide Last-Modified values. In those rare cases where the use of a Last-Modified value as a validator by an HTTP/1.0 system could result in a serious problem, then HTTP/1.1 origin servers should not provide one. 13.3.5. Non-validating Conditionals The principle behind entity tags is that only the service author knows the semantics of a resource well enough to select an appropriate cache validation mechanism, and the specification of any validator comparison function more complex than byte-equality would open up a can of worms. Thus, comparisons of any other headers (except Last-Modified, for compatibility with HTTP/1.0) are never used for purposes of validating a cache entry. 13.4. Response Cacheability Unless specifically constrained by a cache-control (Section 14.9) directive, a caching system MAY always store a successful response (see Section 13.8) as a cache entry, MAY return it without validation if it is fresh, and MAY return it after successful validation. If there is neither a cache validator nor an explicit expiration time associated with a response, we do not expect it to be cached, but certain caches MAY violate this expectation (for example, when little or no network connectivity is available). A client can usually detect that such a response was taken from a cache by comparing the Date header to the current time. Note: some HTTP/1.0 caches are known to violate this expectation without providing any Warning. Fielding, et al. Expires May 23, 2007 [Page 101] Internet-Draft HTTP/1.1 November 2006 However, in some cases it might be inappropriate for a cache to retain an entity, or to return it in response to a subsequent request. This might be because absolute semantic transparency is deemed necessary by the service author, or because of security or privacy considerations. Certain cache-control directives are therefore provided so that the server can indicate that certain resource entities, or portions thereof, are not to be cached regardless of other considerations. Note that Section 14.8 normally prevents a shared cache from saving and returning a response to a previous request if that request included an Authorization header. A response received with a status code of 200, 203, 206, 300, 301 or 410 MAY be stored by a cache and used in reply to a subsequent request, subject to the expiration mechanism, unless a cache-control directive prohibits caching. However, a cache that does not support the Range and Content-Range headers MUST NOT cache 206 (Partial Content) responses. A response received with any other status code (e.g. status codes 302 and 307) MUST NOT be returned in a reply to a subsequent request unless there are cache-control directives or another header(s) that explicitly allow it. For example, these include the following: an Expires header (Section 14.21); a "max-age", "s-maxage", "must- revalidate", "proxy-revalidate", "public" or "private" cache-control directive (Section 14.9). 13.5. Constructing Responses From Caches The purpose of an HTTP cache is to store information received in response to requests for use in responding to future requests. In many cases, a cache simply returns the appropriate parts of a response to the requester. However, if the cache holds a cache entry based on a previous response, it might have to combine parts of a new response with what is held in the cache entry. 13.5.1. End-to-end and Hop-by-hop Headers For the purpose of defining the behavior of caches and non-caching proxies, we divide HTTP headers into two categories: o End-to-end headers, which are transmitted to the ultimate recipient of a request or response. End-to-end headers in responses MUST be stored as part of a cache entry and MUST be transmitted in any response formed from a cache entry. Fielding, et al. Expires May 23, 2007 [Page 102] Internet-Draft HTTP/1.1 November 2006 o Hop-by-hop headers, which are meaningful only for a single transport-level connection, and are not stored by caches or forwarded by proxies. The following HTTP/1.1 headers are hop-by-hop headers: o Connection o Keep-Alive o Proxy-Authenticate o Proxy-Authorization o TE o Trailer o Transfer-Encoding o Upgrade All other headers defined by HTTP/1.1 are end-to-end headers. Other hop-by-hop headers MUST be listed in a Connection header, (Section 14.10) to be introduced into HTTP/1.1 (or later). 13.5.2. Non-modifiable Headers Some features of the HTTP/1.1 protocol, such as Digest Authentication, depend on the value of certain end-to-end headers. A transparent proxy SHOULD NOT modify an end-to-end header unless the definition of that header requires or specifically allows that. A transparent proxy MUST NOT modify any of the following fields in a request or response, and it MUST NOT add any of these fields if not already present: o Content-Location o Content-MD5 o ETag o Last-Modified A transparent proxy MUST NOT modify any of the following fields in a response: Fielding, et al. Expires May 23, 2007 [Page 103] Internet-Draft HTTP/1.1 November 2006 o Expires but it MAY add any of these fields if not already present. If an Expires header is added, it MUST be given a field-value identical to that of the Date header in that response. A proxy MUST NOT modify or add any of the following fields in a message that contains the no-transform cache-control directive, or in any request: o Content-Encoding o Content-Range o Content-Type A non-transparent proxy MAY modify or add these fields to a message that does not include no-transform, but if it does so, it MUST add a Warning 214 (Transformation applied) if one does not already appear in the message (see Section 14.46). Warning: unnecessary modification of end-to-end headers might cause authentication failures if stronger authentication mechanisms are introduced in later versions of HTTP. Such authentication mechanisms MAY rely on the values of header fields not listed here. The Content-Length field of a request or response is added or deleted according to the rules in Section 4.4. A transparent proxy MUST preserve the entity-length (Section 7.2.2) of the entity-body, although it MAY change the transfer-length (Section 4.4). 13.5.3. Combining Headers When a cache makes a validating request to a server, and the server provides a 304 (Not Modified) response or a 206 (Partial Content) response, the cache then constructs a response to send to the requesting client. If the status code is 304 (Not Modified), the cache uses the entity- body stored in the cache entry as the entity-body of this outgoing response. If the status code is 206 (Partial Content) and the ETag or Last-Modified headers match exactly, the cache MAY combine the contents stored in the cache entry with the new contents received in the response and use the result as the entity-body of this outgoing response, (see 13.5.4). The end-to-end headers stored in the cache entry are used for the Fielding, et al. Expires May 23, 2007 [Page 104] Internet-Draft HTTP/1.1 November 2006 constructed response, except that o any stored Warning headers with warn-code 1xx (see Section 14.46) MUST be deleted from the cache entry and the forwarded response. o any stored Warning headers with warn-code 2xx MUST be retained in the cache entry and the forwarded response. o any end-to-end headers provided in the 304 or 206 response MUST replace the corresponding headers from the cache entry. Unless the cache decides to remove the cache entry, it MUST also replace the end-to-end headers stored with the cache entry with corresponding headers received in the incoming response, except for Warning headers as described immediately above. If a header field- name in the incoming response matches more than one header in the cache entry, all such old headers MUST be replaced. In other words, the set of end-to-end headers received in the incoming response overrides all corresponding end-to-end headers stored with the cache entry (except for stored Warning headers with warn-code 1xx, which are deleted even if not overridden). Note: this rule allows an origin server to use a 304 (Not Modified) or a 206 (Partial Content) response to update any header associated with a previous response for the same entity or sub- ranges thereof, although it might not always be meaningful or correct to do so. This rule does not allow an origin server to use a 304 (Not Modified) or a 206 (Partial Content) response to entirely delete a header that it had provided with a previous response. 13.5.4. Combining Byte Ranges A response might transfer only a subrange of the bytes of an entity- body, either because the request included one or more Range specifications, or because a connection was broken prematurely. After several such transfers, a cache might have received several ranges of the same entity-body. If a cache has a stored non-empty set of subranges for an entity, and an incoming response transfers another subrange, the cache MAY combine the new subrange with the existing set if both the following conditions are met: o Both the incoming response and the cache entry have a cache validator. Fielding, et al. Expires May 23, 2007 [Page 105] Internet-Draft HTTP/1.1 November 2006 o The two cache validators match using the strong comparison function (see Section 13.3.3). If either requirement is not met, the cache MUST use only the most recent partial response (based on the Date values transmitted with every response, and using the incoming response if these values are equal or missing), and MUST discard the other partial information. 13.6. Caching Negotiated Responses Use of server-driven content negotiation (Section 12.1), as indicated by the presence of a Vary header field in a response, alters the conditions and procedure by which a cache can use the response for subsequent requests. See Section 14.44 for use of the Vary header field by servers. A server SHOULD use the Vary header field to inform a cache of what request-header fields were used to select among multiple representations of a cacheable response subject to server-driven negotiation. The set of header fields named by the Vary field value is known as the "selecting" request-headers. When the cache receives a subsequent request whose Request-URI specifies one or more cache entries including a Vary header field, the cache MUST NOT use such a cache entry to construct a response to the new request unless all of the selecting request-headers present in the new request match the corresponding stored request-headers in the original request. The selecting request-headers from two requests are defined to match if and only if the selecting request-headers in the first request can be transformed to the selecting request-headers in the second request by adding or removing linear white space (LWS) at places where this is allowed by the corresponding BNF, and/or combining multiple message-header fields with the same field name following the rules about message headers in Section 4.2. A Vary header field-value of "*" always fails to match and subsequent requests on that resource can only be properly interpreted by the origin server. If the selecting request header fields for the cached entry do not match the selecting request header fields of the new request, then the cache MUST NOT use a cached entry to satisfy the request unless it first relays the new request to the origin server in a conditional request and the server responds with 304 (Not Modified), including an entity tag or Content-Location that indicates the entity to be used. Fielding, et al. Expires May 23, 2007 [Page 106] Internet-Draft HTTP/1.1 November 2006 If an entity tag was assigned to a cached representation, the forwarded request SHOULD be conditional and include the entity tags in an If-None-Match header field from all its cache entries for the resource. This conveys to the server the set of entities currently held by the cache, so that if any one of these entities matches the requested entity, the server can use the ETag header field in its 304 (Not Modified) response to tell the cache which entry is appropriate. If the entity-tag of the new response matches that of an existing entry, the new response SHOULD be used to update the header fields of the existing entry, and the result MUST be returned to the client. If any of the existing cache entries contains only partial content for the associated entity, its entity-tag SHOULD NOT be included in the If-None-Match header field unless the request is for a range that would be fully satisfied by that entry. If a cache receives a successful response whose Content-Location field matches that of an existing cache entry for the same Request- URI, whose entity-tag differs from that of the existing entry, and whose Date is more recent than that of the existing entry, the existing entry SHOULD NOT be returned in response to future requests and SHOULD be deleted from the cache. 13.7. Shared and Non-Shared Caches For reasons of security and privacy, it is necessary to make a distinction between "shared" and "non-shared" caches. A non-shared cache is one that is accessible only to a single user. Accessibility in this case SHOULD be enforced by appropriate security mechanisms. All other caches are considered to be "shared." Other sections of this specification place certain constraints on the operation of shared caches in order to prevent loss of privacy or failure of access controls. 13.8. Errors or Incomplete Response Cache Behavior A cache that receives an incomplete response (for example, with fewer bytes of data than specified in a Content-Length header) MAY store the response. However, the cache MUST treat this as a partial response. Partial responses MAY be combined as described in Section 13.5.4; the result might be a full response or might still be partial. A cache MUST NOT return a partial response to a client without explicitly marking it as such, using the 206 (Partial Content) status code. A cache MUST NOT return a partial response using a status code of 200 (OK). If a cache receives a 5xx response while attempting to revalidate an entry, it MAY either forward this response to the requesting client, Fielding, et al. Expires May 23, 2007 [Page 107] Internet-Draft HTTP/1.1 November 2006 or act as if the server failed to respond. In the latter case, it MAY return a previously received response unless the cached entry includes the "must-revalidate" cache-control directive (see Section 14.9). 13.9. Side Effects of GET and HEAD Unless the origin server explicitly prohibits the caching of their responses, the application of GET and HEAD methods to any resources SHOULD NOT have side effects that would lead to erroneous behavior if these responses are taken from a cache. They MAY still have side effects, but a cache is not required to consider such side effects in its caching decisions. Caches are always expected to observe an origin server's explicit restrictions on caching. We note one exception to this rule: since some applications have traditionally used GETs and HEADs with query URLs (those containing a "?" in the rel_path part) to perform operations with significant side effects, caches MUST NOT treat responses to such URIs as fresh unless the server provides an explicit expiration time. This specifically means that responses from HTTP/1.0 servers for such URIs SHOULD NOT be taken from a cache. See Section 9.1.1 for related information. 13.10. Invalidation After Updates or Deletions The effect of certain methods performed on a resource at the origin server might cause one or more existing cache entries to become non- transparently invalid. That is, although they might continue to be "fresh," they do not accurately reflect what the origin server would return for a new request on that resource. There is no way for the HTTP protocol to guarantee that all such cache entries are marked invalid. For example, the request that caused the change at the origin server might not have gone through the proxy where a cache entry is stored. However, several rules help reduce the likelihood of erroneous behavior. In this section, the phrase "invalidate an entity" means that the cache will either remove all instances of that entity from its storage, or will mark these as "invalid" and in need of a mandatory revalidation before they can be returned in response to a subsequent request. Some HTTP methods MUST cause a cache to invalidate an entity. This is either the entity referred to by the Request-URI, or by the Location or Content-Location headers (if present). These methods are: Fielding, et al. Expires May 23, 2007 [Page 108] Internet-Draft HTTP/1.1 November 2006 o PUT o DELETE o POST An invalidation based on the URI in a Location or Content-Location header MUST NOT be performed if the host part of that URI differs from the host part in the Request-URI. This helps prevent denial of service attacks. A cache that passes through requests for methods it does not understand SHOULD invalidate any entities referred to by the Request- URI. 13.11. Write-Through Mandatory All methods that might be expected to cause modifications to the origin server's resources MUST be written through to the origin server. This currently includes all methods except for GET and HEAD. A cache MUST NOT reply to such a request from a client before having transmitted the request to the inbound server, and having received a corresponding response from the inbound server. This does not prevent a proxy cache from sending a 100 (Continue) response before the inbound server has sent its final reply. The alternative (known as "write-back" or "copy-back" caching) is not allowed in HTTP/1.1, due to the difficulty of providing consistent updates and the problems arising from server, cache, or network failure prior to write-back. 13.12. Cache Replacement If a new cacheable (see Sections 14.9.2, 13.2.5, 13.2.6 and 13.8) response is received from a resource while any existing responses for the same resource are cached, the cache SHOULD use the new response to reply to the current request. It MAY insert it into cache storage and MAY, if it meets all other requirements, use it to respond to any future requests that would previously have caused the old response to be returned. If it inserts the new response into cache storage the rules in Section 13.5.3 apply. Note: a new response that has an older Date header value than existing cached responses is not cacheable. Fielding, et al. Expires May 23, 2007 [Page 109] Internet-Draft HTTP/1.1 November 2006 13.13. History Lists User agents often have history mechanisms, such as "Back" buttons and history lists, which can be used to redisplay an entity retrieved earlier in a session. History mechanisms and caches are different. In particular history mechanisms SHOULD NOT try to show a semantically transparent view of the current state of a resource. Rather, a history mechanism is meant to show exactly what the user saw at the time when the resource was retrieved. By default, an expiration time does not apply to history mechanisms. If the entity is still in storage, a history mechanism SHOULD display it even if the entity has expired, unless the user has specifically configured the agent to refresh expired history documents. This is not to be construed to prohibit the history mechanism from telling the user that a view might be stale. Note: if history list mechanisms unnecessarily prevent users from viewing stale resources, this will tend to force service authors to avoid using HTTP expiration controls and cache controls when they would otherwise like to. Service authors may consider it important that users not be presented with error messages or warning messages when they use navigation controls (such as BACK) to view previously fetched resources. Even though sometimes such resources ought not to cached, or ought to expire quickly, user interface considerations may force service authors to resort to other means of preventing caching (e.g. "once-only" URLs) in order not to suffer the effects of improperly functioning history mechanisms. Fielding, et al. Expires May 23, 2007 [Page 110] Internet-Draft HTTP/1.1 November 2006 14. Header Field Definitions This section defines the syntax and semantics of all standard HTTP/1.1 header fields. For entity-header fields, both sender and recipient refer to either the client or the server, depending on who sends and who receives the entity. 14.1. Accept The Accept request-header field can be used to specify certain media types which are acceptable for the response. Accept headers can be used to indicate that the request is specifically limited to a small set of desired types, as in the case of a request for an in-line image. Accept = "Accept" ":" #( media-range [ accept-params ] ) media-range = ( "*/*" | ( type "/" "*" ) | ( type "/" subtype ) ) *( ";" parameter ) accept-params = ";" "q" "=" qvalue *( accept-extension ) accept-extension = ";" token [ "=" ( token | quoted-string ) ] The asterisk "*" character is used to group media types into ranges, with "*/*" indicating all media types and "type/*" indicating all subtypes of that type. The media-range MAY include media type parameters that are applicable to that range. Each media-range MAY be followed by one or more accept-params, beginning with the "q" parameter for indicating a relative quality factor. The first "q" parameter (if any) separates the media-range parameter(s) from the accept-params. Quality factors allow the user or user agent to indicate the relative degree of preference for that media-range, using the qvalue scale from 0 to 1 (Section 3.9). The default value is q=1. Note: Use of the "q" parameter name to separate media type parameters from Accept extension parameters is due to historical practice. Although this prevents any media type parameter named "q" from being used with a media range, such an event is believed to be unlikely given the lack of any "q" parameters in the IANA media type registry and the rare usage of any media type parameters in Accept. Future media types are discouraged from registering any parameter named "q". The example Fielding, et al. Expires May 23, 2007 [Page 111] Internet-Draft HTTP/1.1 November 2006 Accept: audio/*; q=0.2, audio/basic SHOULD be interpreted as "I prefer audio/basic, but send me any audio type if it is the best available after an 80% mark-down in quality." If no Accept header field is present, then it is assumed that the client accepts all media types. If an Accept header field is present, and if the server cannot send a response which is acceptable according to the combined Accept field value, then the server SHOULD send a 406 (not acceptable) response. A more elaborate example is Accept: text/plain; q=0.5, text/html, text/x-dvi; q=0.8, text/x-c Verbally, this would be interpreted as "text/html and text/x-c are the preferred media types, but if they do not exist, then send the text/x-dvi entity, and if that does not exist, send the text/plain entity." Media ranges can be overridden by more specific media ranges or specific media types. If more than one media range applies to a given type, the most specific reference has precedence. For example, Accept: text/*, text/html, text/html;level=1, */* have the following precedence: 1) text/html;level=1 2) text/html 3) text/* 4) */* The media type quality factor associated with a given type is determined by finding the media range with the highest precedence which matches that type. For example, Accept: text/*;q=0.3, text/html;q=0.7, text/html;level=1, text/html;level=2;q=0.4, */*;q=0.5 would cause the following values to be associated: text/html;level=1 = 1 text/html = 0.7 text/plain = 0.3 image/jpeg = 0.5 text/html;level=2 = 0.4 Fielding, et al. Expires May 23, 2007 [Page 112] Internet-Draft HTTP/1.1 November 2006 text/html;level=3 = 0.7 Note: A user agent might be provided with a default set of quality values for certain media ranges. However, unless the user agent is a closed system which cannot interact with other rendering agents, this default set ought to be configurable by the user. 14.2. Accept-Charset The Accept-Charset request-header field can be used to indicate what character sets are acceptable for the response. This field allows clients capable of understanding more comprehensive or special- purpose character sets to signal that capability to a server which is capable of representing documents in those character sets. Accept-Charset = "Accept-Charset" ":" 1#( ( charset | "*" )[ ";" "q" "=" qvalue ] ) Character set values are described in Section 3.4. Each charset MAY be given an associated quality value which represents the user's preference for that charset. The default value is q=1. An example is Accept-Charset: iso-8859-5, unicode-1-1;q=0.8 The special value "*", if present in the Accept-Charset field, matches every character set (including ISO-8859-1) which is not mentioned elsewhere in the Accept-Charset field. If no "*" is present in an Accept-Charset field, then all character sets not explicitly mentioned get a quality value of 0, except for ISO-8859-1, which gets a quality value of 1 if not explicitly mentioned. If no Accept-Charset header is present, the default is that any character set is acceptable. If an Accept-Charset header is present, and if the server cannot send a response which is acceptable according to the Accept-Charset header, then the server SHOULD send an error response with the 406 (not acceptable) status code, though the sending of an unacceptable response is also allowed. 14.3. Accept-Encoding The Accept-Encoding request-header field is similar to Accept, but restricts the content-codings (Section 3.5) that are acceptable in the response. Accept-Encoding = "Accept-Encoding" ":" 1#( codings [ ";" "q" "=" qvalue ] ) codings = ( content-coding | "*" ) Fielding, et al. Expires May 23, 2007 [Page 113] Internet-Draft HTTP/1.1 November 2006 Examples of its use are: Accept-Encoding: compress, gzip Accept-Encoding: Accept-Encoding: * Accept-Encoding: compress;q=0.5, gzip;q=1.0 Accept-Encoding: gzip;q=1.0, identity; q=0.5, *;q=0 A server tests whether a content-coding is acceptable, according to an Accept-Encoding field, using these rules: 1. If the content-coding is one of the content-codings listed in the Accept-Encoding field, then it is acceptable, unless it is accompanied by a qvalue of 0. (As defined in Section 3.9, a qvalue of 0 means "not acceptable.") 2. The special "*" symbol in an Accept-Encoding field matches any available content-coding not explicitly listed in the header field. 3. If multiple content-codings are acceptable, then the acceptable content-coding with the highest non-zero qvalue is preferred. 4. The "identity" content-coding is always acceptable, unless specifically refused because the Accept-Encoding field includes "identity;q=0", or because the field includes "*;q=0" and does not explicitly include the "identity" content-coding. If the Accept-Encoding field-value is empty, then only the "identity" encoding is acceptable. If an Accept-Encoding field is present in a request, and if the server cannot send a response which is acceptable according to the Accept-Encoding header, then the server SHOULD send an error response with the 406 (Not Acceptable) status code. If no Accept-Encoding field is present in a request, the server MAY assume that the client will accept any content coding. In this case, if "identity" is one of the available content-codings, then the server SHOULD use the "identity" content-coding, unless it has additional information that a different content-coding is meaningful to the client. Note: If the request does not include an Accept-Encoding field, and if the "identity" content-coding is unavailable, then content- codings commonly understood by HTTP/1.0 clients (i.e., "gzip" and "compress") are preferred; some older clients improperly display messages sent with other content-codings. The server might also make this decision based on information about the particular user- Fielding, et al. Expires May 23, 2007 [Page 114] Internet-Draft HTTP/1.1 November 2006 agent or client. Note: Most HTTP/1.0 applications do not recognize or obey qvalues associated with content-codings. This means that qvalues will not work and are not permitted with x-gzip or x-compress. 14.4. Accept-Language The Accept-Language request-header field is similar to Accept, but restricts the set of natural languages that are preferred as a response to the request. Language tags are defined in Section 3.10. Accept-Language = "Accept-Language" ":" 1#( language-range [ ";" "q" "=" qvalue ] ) language-range = ( ( 1*8ALPHA *( "-" 1*8ALPHA ) ) | "*" ) Each language-range MAY be given an associated quality value which represents an estimate of the user's preference for the languages specified by that range. The quality value defaults to "q=1". For example, Accept-Language: da, en-gb;q=0.8, en;q=0.7 would mean: "I prefer Danish, but will accept British English and other types of English." A language-range matches a language-tag if it exactly equals the tag, or if it exactly equals a prefix of the tag such that the first tag character following the prefix is "-". The special range "*", if present in the Accept-Language field, matches every tag not matched by any other range present in the Accept-Language field. Note: This use of a prefix matching rule does not imply that language tags are assigned to languages in such a way that it is always true that if a user understands a language with a certain tag, then this user will also understand all languages with tags for which this tag is a prefix. The prefix rule simply allows the use of prefix tags if this is the case. The language quality factor assigned to a language-tag by the Accept- Language field is the quality value of the longest language-range in the field that matches the language-tag. If no language-range in the field matches the tag, the language quality factor assigned is 0. If no Accept-Language header is present in the request, the server SHOULD assume that all languages are equally acceptable. If an Accept-Language header is present, then all languages which are assigned a quality factor greater than 0 are acceptable. It might be contrary to the privacy expectations of the user to send Fielding, et al. Expires May 23, 2007 [Page 115] Internet-Draft HTTP/1.1 November 2006 an Accept-Language header with the complete linguistic preferences of the user in every request. For a discussion of this issue, see Section 15.1.4. As intelligibility is highly dependent on the individual user, it is recommended that client applications make the choice of linguistic preference available to the user. If the choice is not made available, then the Accept-Language header field MUST NOT be given in the request. Note: When making the choice of linguistic preference available to the user, we remind implementors of the fact that users are not familiar with the details of language matching as described above, and should provide appropriate guidance. As an example, users might assume that on selecting "en-gb", they will be served any kind of English document if British English is not available. A user agent might suggest in such a case to add "en" to get the best matching behavior. 14.5. Accept-Ranges The Accept-Ranges response-header field allows the server to indicate its acceptance of range requests for a resource: Accept-Ranges = "Accept-Ranges" ":" acceptable-ranges acceptable-ranges = 1#range-unit | "none" Origin servers that accept byte-range requests MAY send Accept-Ranges: bytes but are not required to do so. Clients MAY generate byte-range requests without having received this header for the resource involved. Range units are defined in Section 3.12. Servers that do not accept any kind of range request for a resource MAY send Accept-Ranges: none to advise the client not to attempt a range request. 14.6. Age The Age response-header field conveys the sender's estimate of the amount of time since the response (or its revalidation) was generated at the origin server. A cached response is "fresh" if its age does not exceed its freshness lifetime. Age values are calculated as Fielding, et al. Expires May 23, 2007 [Page 116] Internet-Draft HTTP/1.1 November 2006 specified in Section 13.2.3. Age = "Age" ":" age-value age-value = delta-seconds Age values are non-negative decimal integers, representing time in seconds. If a cache receives a value larger than the largest positive integer it can represent, or if any of its age calculations overflows, it MUST transmit an Age header with a value of 2147483648 (2^31). An HTTP/1.1 server that includes a cache MUST include an Age header field in every response generated from its own cache. Caches SHOULD use an arithmetic type of at least 31 bits of range. 14.7. Allow The Allow entity-header field lists the set of methods supported by the resource identified by the Request-URI. The purpose of this field is strictly to inform the recipient of valid methods associated with the resource. An Allow header field MUST be present in a 405 (Method Not Allowed) response. Allow = "Allow" ":" #Method Example of use: Allow: GET, HEAD, PUT This field cannot prevent a client from trying other methods. However, the indications given by the Allow header field value SHOULD be followed. The actual set of allowed methods is defined by the origin server at the time of each request. The Allow header field MAY be provided with a PUT request to recommend the methods to be supported by the new or modified resource. The server is not required to support these methods and SHOULD include an Allow header in the response giving the actual supported methods. A proxy MUST NOT modify the Allow header field even if it does not understand all the methods specified, since the user agent might have other means of communicating with the origin server. 14.8. Authorization A user agent that wishes to authenticate itself with a server-- usually, but not necessarily, after receiving a 401 response--does so Fielding, et al. Expires May 23, 2007 [Page 117] Internet-Draft HTTP/1.1 November 2006 by including an Authorization request-header field with the request. The Authorization field value consists of credentials containing the authentication information of the user agent for the realm of the resource being requested. Authorization = "Authorization" ":" credentials HTTP access authentication is described in "HTTP Authentication: Basic and Digest Access Authentication" [RFC2617]. If a request is authenticated and a realm specified, the same credentials SHOULD be valid for all other requests within this realm (assuming that the authentication scheme itself does not require otherwise, such as credentials that vary according to a challenge value or using synchronized clocks). When a shared cache (see Section 13.7) receives a request containing an Authorization field, it MUST NOT return the corresponding response as a reply to any other request, unless one of the following specific exceptions holds: 1. If the response includes the "s-maxage" cache-control directive, the cache MAY use that response in replying to a subsequent request. But (if the specified maximum age has passed) a proxy cache MUST first revalidate it with the origin server, using the request-headers from the new request to allow the origin server to authenticate the new request. (This is the defined behavior for s-maxage.) If the response includes "s-maxage=0", the proxy MUST always revalidate it before re-using it. 2. If the response includes the "must-revalidate" cache-control directive, the cache MAY use that response in replying to a subsequent request. But if the response is stale, all caches MUST first revalidate it with the origin server, using the request-headers from the new request to allow the origin server to authenticate the new request. 3. If the response includes the "public" cache-control directive, it MAY be returned in reply to any subsequent request. 14.9. Cache-Control The Cache-Control general-header field is used to specify directives that MUST be obeyed by all caching mechanisms along the request/ response chain. The directives specify behavior intended to prevent caches from adversely interfering with the request or response. These directives typically override the default caching algorithms. Cache directives are unidirectional in that the presence of a directive in a request does not imply that the same directive is to Fielding, et al. Expires May 23, 2007 [Page 118] Internet-Draft HTTP/1.1 November 2006 be given in the response. Note that HTTP/1.0 caches might not implement Cache-Control and might only implement Pragma: no-cache (see Section 14.32). Cache directives MUST be passed through by a proxy or gateway application, regardless of their significance to that application, since the directives might be applicable to all recipients along the request/response chain. It is not possible to specify a cache- directive for a specific cache. Cache-Control = "Cache-Control" ":" 1#cache-directive cache-directive = cache-request-directive | cache-response-directive cache-request-directive = "no-cache" ; Section 14.9.1 | "no-store" ; Section 14.9.2 | "max-age" "=" delta-seconds ; Section 14.9.3, 14.9.4 | "max-stale" [ "=" delta-seconds ] ; Section 14.9.3 | "min-fresh" "=" delta-seconds ; Section 14.9.3 | "no-transform" ; Section 14.9.5 | "only-if-cached" ; Section 14.9.4 | cache-extension ; Section 14.9.6 cache-response-directive = "public" ; Section 14.9.1 | "private" [ "=" <"> 1#field-name <"> ] ; Section 14.9.1 | "no-cache" [ "=" <"> 1#field-name <"> ]; Section 14.9.1 | "no-store" ; Section 14.9.2 | "no-transform" ; Section 14.9.5 | "must-revalidate" ; Section 14.9.4 | "proxy-revalidate" ; Section 14.9.4 | "max-age" "=" delta-seconds ; Section 14.9.3 | "s-maxage" "=" delta-seconds ; Section 14.9.3 | cache-extension ; Section 14.9.6 cache-extension = token [ "=" ( token | quoted-string ) ] When a directive appears without any 1#field-name parameter, the directive applies to the entire request or response. When such a directive appears with a 1#field-name parameter, it applies only to the named field or fields, and not to the rest of the request or response. This mechanism supports extensibility; implementations of future versions of the HTTP protocol might apply these directives to header fields not defined in HTTP/1.1. Fielding, et al. Expires May 23, 2007 [Page 119] Internet-Draft HTTP/1.1 November 2006 The cache-control directives can be broken down into these general categories: o Restrictions on what are cacheable; these may only be imposed by the origin server. o Restrictions on what may be stored by a cache; these may be imposed by either the origin server or the user agent. o Modifications of the basic expiration mechanism; these may be imposed by either the origin server or the user agent. o Controls over cache revalidation and reload; these may only be imposed by a user agent. o Control over transformation of entities. o Extensions to the caching system. 14.9.1. What is Cacheable By default, a response is cacheable if the requirements of the request method, request header fields, and the response status indicate that it is cacheable. Section 13.4 summarizes these defaults for cacheability. The following Cache-Control response directives allow an origin server to override the default cacheability of a response: public Indicates that the response MAY be cached by any cache, even if it would normally be non-cacheable or cacheable only within a non- shared cache. (See also Authorization, Section 14.8, for additional details.) private Indicates that all or part of the response message is intended for a single user and MUST NOT be cached by a shared cache. This allows an origin server to state that the specified parts of the response are intended for only one user and are not a valid response for requests by other users. A private (non-shared) cache MAY cache the response. Note: This usage of the word private only controls where the response may be cached, and cannot ensure the privacy of the message content. Fielding, et al. Expires May 23, 2007 [Page 120] Internet-Draft HTTP/1.1 November 2006 no-cache If the no-cache directive does not specify a field-name, then a cache MUST NOT use the response to satisfy a subsequent request without successful revalidation with the origin server. This allows an origin server to prevent caching even by caches that have been configured to return stale responses to client requests. If the no-cache directive does specify one or more field-names, then a cache MAY use the response to satisfy a subsequent request, subject to any other restrictions on caching. However, the specified field-name(s) MUST NOT be sent in the response to a subsequent request without successful revalidation with the origin server. This allows an origin server to prevent the re-use of certain header fields in a response, while still allowing caching of the rest of the response. Note: Most HTTP/1.0 caches will not recognize or obey this directive. 14.9.2. What May be Stored by Caches no-store The purpose of the no-store directive is to prevent the inadvertent release or retention of sensitive information (for example, on backup tapes). The no-store directive applies to the entire message, and MAY be sent either in a response or in a request. If sent in a request, a cache MUST NOT store any part of either this request or any response to it. If sent in a response, a cache MUST NOT store any part of either this response or the request that elicited it. This directive applies to both non- shared and shared caches. "MUST NOT store" in this context means that the cache MUST NOT intentionally store the information in non-volatile storage, and MUST make a best-effort attempt to remove the information from volatile storage as promptly as possible after forwarding it. Even when this directive is associated with a response, users might explicitly store such a response outside of the caching system (e.g., with a "Save As" dialog). History buffers MAY store such responses as part of their normal operation. The purpose of this directive is to meet the stated requirements of certain users and service authors who are concerned about accidental releases of information via unanticipated accesses to cache data structures. While the use of this directive might improve privacy in some cases, we caution that it is NOT in any Fielding, et al. Expires May 23, 2007 [Page 121] Internet-Draft HTTP/1.1 November 2006 way a reliable or sufficient mechanism for ensuring privacy. In particular, malicious or compromised caches might not recognize or obey this directive, and communications networks might be vulnerable to eavesdropping. 14.9.3. Modifications of the Basic Expiration Mechanism The expiration time of an entity MAY be specified by the origin server using the Expires header (see Section 14.21). Alternatively, it MAY be specified using the max-age directive in a response. When the max-age cache-control directive is present in a cached response, the response is stale if its current age is greater than the age value given (in seconds) at the time of a new request for that resource. The max-age directive on a response implies that the response is cacheable (i.e., "public") unless some other, more restrictive cache directive is also present. If a response includes both an Expires header and a max-age directive, the max-age directive overrides the Expires header, even if the Expires header is more restrictive. This rule allows an origin server to provide, for a given response, a longer expiration time to an HTTP/1.1 (or later) cache than to an HTTP/1.0 cache. This might be useful if certain HTTP/1.0 caches improperly calculate ages or expiration times, perhaps due to desynchronized clocks. Many HTTP/1.0 cache implementations will treat an Expires value that is less than or equal to the response Date value as being equivalent to the Cache-Control response directive "no-cache". If an HTTP/1.1 cache receives such a response, and the response does not include a Cache-Control header field, it SHOULD consider the response to be non-cacheable in order to retain compatibility with HTTP/1.0 servers. Note: An origin server might wish to use a relatively new HTTP cache control feature, such as the "private" directive, on a network including older caches that do not understand that feature. The origin server will need to combine the new feature with an Expires field whose value is less than or equal to the Date value. This will prevent older caches from improperly caching the response. s-maxage If a response includes an s-maxage directive, then for a shared cache (but not for a private cache), the maximum age specified by this directive overrides the maximum age specified by either the max-age directive or the Expires header. The s-maxage directive also implies the semantics of the proxy-revalidate directive (see Section 14.9.4), i.e., that the shared cache must not use the Fielding, et al. Expires May 23, 2007 [Page 122] Internet-Draft HTTP/1.1 November 2006 entry after it becomes stale to respond to a subsequent request without first revalidating it with the origin server. The s-maxage directive is always ignored by a private cache. Note that most older caches, not compliant with this specification, do not implement any cache-control directives. An origin server wishing to use a cache-control directive that restricts, but does not prevent, caching by an HTTP/1.1-compliant cache MAY exploit the requirement that the max-age directive overrides the Expires header, and the fact that pre-HTTP/1.1-compliant caches do not observe the max-age directive. Other directives allow a user agent to modify the basic expiration mechanism. These directives MAY be specified on a request: max-age Indicates that the client is willing to accept a response whose age is no greater than the specified time in seconds. Unless max- stale directive is also included, the client is not willing to accept a stale response. min-fresh Indicates that the client is willing to accept a response whose freshness lifetime is no less than its current age plus the specified time in seconds. That is, the client wants a response that will still be fresh for at least the specified number of seconds. max-stale Indicates that the client is willing to accept a response that has exceeded its expiration time. If max-stale is assigned a value, then the client is willing to accept a response that has exceeded its expiration time by no more than the specified number of seconds. If no value is assigned to max-stale, then the client is willing to accept a stale response of any age. If a cache returns a stale response, either because of a max-stale directive on a request, or because the cache is configured to override the expiration time of a response, the cache MUST attach a Warning header to the stale response, using Warning 110 (Response is stale). A cache MAY be configured to return stale responses without validation, but only if this does not conflict with any "MUST"-level requirements concerning cache validation (e.g., a "must-revalidate" Fielding, et al. Expires May 23, 2007 [Page 123] Internet-Draft HTTP/1.1 November 2006 cache-control directive). If both the new request and the cached entry include "max-age" directives, then the lesser of the two values is used for determining the freshness of the cached entry for that request. 14.9.4. Cache Revalidation and Reload Controls Sometimes a user agent might want or need to insist that a cache revalidate its cache entry with the origin server (and not just with the next cache along the path to the origin server), or to reload its cache entry from the origin server. End-to-end revalidation might be necessary if either the cache or the origin server has overestimated the expiration time of the cached response. End-to-end reload may be necessary if the cache entry has become corrupted for some reason. End-to-end revalidation may be requested either when the client does not have its own local cached copy, in which case we call it "unspecified end-to-end revalidation", or when the client does have a local cached copy, in which case we call it "specific end-to-end revalidation." The client can specify these three kinds of action using Cache- Control request directives: End-to-end reload The request includes a "no-cache" cache-control directive or, for compatibility with HTTP/1.0 clients, "Pragma: no-cache". Field names MUST NOT be included with the no-cache directive in a request. The server MUST NOT use a cached copy when responding to such a request. Specific end-to-end revalidation The request includes a "max-age=0" cache-control directive, which forces each cache along the path to the origin server to revalidate its own entry, if any, with the next cache or server. The initial request includes a cache-validating conditional with the client's current validator. Unspecified end-to-end revalidation The request includes "max-age=0" cache-control directive, which forces each cache along the path to the origin server to revalidate its own entry, if any, with the next cache or server. The initial request does not include a cache-validating conditional; the first cache along the path (if any) that holds a Fielding, et al. Expires May 23, 2007 [Page 124] Internet-Draft HTTP/1.1 November 2006 cache entry for this resource includes a cache-validating conditional with its current validator. max-age When an intermediate cache is forced, by means of a max-age=0 directive, to revalidate its own cache entry, and the client has supplied its own validator in the request, the supplied validator might differ from the validator currently stored with the cache entry. In this case, the cache MAY use either validator in making its own request without affecting semantic transparency. However, the choice of validator might affect performance. The best approach is for the intermediate cache to use its own validator when making its request. If the server replies with 304 (Not Modified), then the cache can return its now validated copy to the client with a 200 (OK) response. If the server replies with a new entity and cache validator, however, the intermediate cache can compare the returned validator with the one provided in the client's request, using the strong comparison function. If the client's validator is equal to the origin server's, then the intermediate cache simply returns 304 (Not Modified). Otherwise, it returns the new entity with a 200 (OK) response. If a request includes the no-cache directive, it SHOULD NOT include min-fresh, max-stale, or max-age. only-if-cached In some cases, such as times of extremely poor network connectivity, a client may want a cache to return only those responses that it currently has stored, and not to reload or revalidate with the origin server. To do this, the client may include the only-if-cached directive in a request. If it receives this directive, a cache SHOULD either respond using a cached entry that is consistent with the other constraints of the request, or respond with a 504 (Gateway Timeout) status. However, if a group of caches is being operated as a unified system with good internal connectivity, such a request MAY be forwarded within that group of caches. must-revalidate Because a cache MAY be configured to ignore a server's specified expiration time, and because a client request MAY include a max- stale directive (which has a similar effect), the protocol also includes a mechanism for the origin server to require revalidation of a cache entry on any subsequent use. When the must-revalidate Fielding, et al. Expires May 23, 2007 [Page 125] Internet-Draft HTTP/1.1 November 2006 directive is present in a response received by a cache, that cache MUST NOT use the entry after it becomes stale to respond to a subsequent request without first revalidating it with the origin server. (I.e., the cache MUST do an end-to-end revalidation every time, if, based solely on the origin server's Expires or max-age value, the cached response is stale.) The must-revalidate directive is necessary to support reliable operation for certain protocol features. In all circumstances an HTTP/1.1 cache MUST obey the must-revalidate directive; in particular, if the cache cannot reach the origin server for any reason, it MUST generate a 504 (Gateway Timeout) response. Servers SHOULD send the must-revalidate directive if and only if failure to revalidate a request on the entity could result in incorrect operation, such as a silently unexecuted financial transaction. Recipients MUST NOT take any automated action that violates this directive, and MUST NOT automatically provide an unvalidated copy of the entity if revalidation fails. Although this is not recommended, user agents operating under severe connectivity constraints MAY violate this directive but, if so, MUST explicitly warn the user that an unvalidated response has been provided. The warning MUST be provided on each unvalidated access, and SHOULD require explicit user confirmation. proxy-revalidate The proxy-revalidate directive has the same meaning as the must- revalidate directive, except that it does not apply to non-shared user agent caches. It can be used on a response to an authenticated request to permit the user's cache to store and later return the response without needing to revalidate it (since it has already been authenticated once by that user), while still requiring proxies that service many users to revalidate each time (in order to make sure that each user has been authenticated). Note that such authenticated responses also need the public cache control directive in order to allow them to be cached at all. 14.9.5. No-Transform Directive no-transform Implementors of intermediate caches (proxies) have found it useful to convert the media type of certain entity bodies. A non- transparent proxy might, for example, convert between image formats in order to save cache space or to reduce the amount of traffic on a slow link. Fielding, et al. Expires May 23, 2007 [Page 126] Internet-Draft HTTP/1.1 November 2006 Serious operational problems occur, however, when these transformations are applied to entity bodies intended for certain kinds of applications. For example, applications for medical imaging, scientific data analysis and those using end-to-end authentication, all depend on receiving an entity body that is bit for bit identical to the original entity-body. Therefore, if a message includes the no-transform directive, an intermediate cache or proxy MUST NOT change those headers that are listed in Section 13.5.2 as being subject to the no-transform directive. This implies that the cache or proxy MUST NOT change any aspect of the entity-body that is specified by these headers, including the value of the entity-body itself. 14.9.6. Cache Control Extensions The Cache-Control header field can be extended through the use of one or more cache-extension tokens, each with an optional assigned value. Informational extensions (those which do not require a change in cache behavior) MAY be added without changing the semantics of other directives. Behavioral extensions are designed to work by acting as modifiers to the existing base of cache directives. Both the new directive and the standard directive are supplied, such that applications which do not understand the new directive will default to the behavior specified by the standard directive, and those that understand the new directive will recognize it as modifying the requirements associated with the standard directive. In this way, extensions to the cache-control directives can be made without requiring changes to the base protocol. This extension mechanism depends on an HTTP cache obeying all of the cache-control directives defined for its native HTTP-version, obeying certain extensions, and ignoring all directives that it does not understand. For example, consider a hypothetical new response directive called community which acts as a modifier to the private directive. We define this new directive to mean that, in addition to any non-shared cache, any cache which is shared only by members of the community named within its value may cache the response. An origin server wishing to allow the UCI community to use an otherwise private response in their shared cache(s) could do so by including Cache-Control: private, community="UCI" A cache seeing this header field will act correctly even if the cache does not understand the community cache-extension, since it will also see and understand the private directive and thus default to the safe Fielding, et al. Expires May 23, 2007 [Page 127] Internet-Draft HTTP/1.1 November 2006 behavior. Unrecognized cache-directives MUST be ignored; it is assumed that any cache-directive likely to be unrecognized by an HTTP/1.1 cache will be combined with standard directives (or the response's default cacheability) such that the cache behavior will remain minimally correct even if the cache does not understand the extension(s). 14.10. Connection The Connection general-header field allows the sender to specify options that are desired for that particular connection and MUST NOT be communicated by proxies over further connections. The Connection header has the following grammar: Connection = "Connection" ":" 1#(connection-token) connection-token = token HTTP/1.1 proxies MUST parse the Connection header field before a message is forwarded and, for each connection-token in this field, remove any header field(s) from the message with the same name as the connection-token. Connection options are signaled by the presence of a connection-token in the Connection header field, not by any corresponding additional header field(s), since the additional header field may not be sent if there are no parameters associated with that connection option. Message headers listed in the Connection header MUST NOT include end- to-end headers, such as Cache-Control. HTTP/1.1 defines the "close" connection option for the sender to signal that the connection will be closed after completion of the response. For example, Connection: close in either the request or the response header fields indicates that the connection SHOULD NOT be considered `persistent' (Section 8.1) after the current request/response is complete. An HTTP/1.1 client that does not support persistent connections MUST include the "close" connection option in every request message. An HTTP/1.1 server that does not support persistent connections MUST include the "close" connection option in every response message that does not have a 1xx (informational) status code. Fielding, et al. Expires May 23, 2007 [Page 128] Internet-Draft HTTP/1.1 November 2006 A system receiving an HTTP/1.0 (or lower-version) message that includes a Connection header MUST, for each connection-token in this field, remove and ignore any header field(s) from the message with the same name as the connection-token. This protects against mistaken forwarding of such header fields by pre-HTTP/1.1 proxies. See Appendix F.2. 14.11. Content-Encoding The Content-Encoding entity-header field is used as a modifier to the media-type. When present, its value indicates what additional content codings have been applied to the entity-body, and thus what decoding mechanisms must be applied in order to obtain the media-type referenced by the Content-Type header field. Content-Encoding is primarily used to allow a document to be compressed without losing the identity of its underlying media type. Content-Encoding = "Content-Encoding" ":" 1#content-coding Content codings are defined in Section 3.5. An example of its use is Content-Encoding: gzip The content-coding is a characteristic of the entity identified by the Request-URI. Typically, the entity-body is stored with this encoding and is only decoded before rendering or analogous usage. However, a non-transparent proxy MAY modify the content-coding if the new coding is known to be acceptable to the recipient, unless the "no-transform" cache-control directive is present in the message. If the content-coding of an entity is not "identity", then the response MUST include a Content-Encoding entity-header (Section 14.11) that lists the non-identity content-coding(s) used. If the content-coding of an entity in a request message is not acceptable to the origin server, the server SHOULD respond with a status code of 415 (Unsupported Media Type). If multiple encodings have been applied to an entity, the content codings MUST be listed in the order in which they were applied. Additional information about the encoding parameters MAY be provided by other entity-header fields not defined by this specification. 14.12. Content-Language The Content-Language entity-header field describes the natural language(s) of the intended audience for the enclosed entity. Note that this might not be equivalent to all the languages used within Fielding, et al. Expires May 23, 2007 [Page 129] Internet-Draft HTTP/1.1 November 2006 the entity-body. Content-Language = "Content-Language" ":" 1#language-tag Language tags are defined in Section 3.10. The primary purpose of Content-Language is to allow a user to identify and differentiate entities according to the user's own preferred language. Thus, if the body content is intended only for a Danish-literate audience, the appropriate field is Content-Language: da If no Content-Language is specified, the default is that the content is intended for all language audiences. This might mean that the sender does not consider it to be specific to any natural language, or that the sender does not know for which language it is intended. Multiple languages MAY be listed for content that is intended for multiple audiences. For example, a rendition of the "Treaty of Waitangi," presented simultaneously in the original Maori and English versions, would call for Content-Language: mi, en However, just because multiple languages are present within an entity does not mean that it is intended for multiple linguistic audiences. An example would be a beginner's language primer, such as "A First Lesson in Latin," which is clearly intended to be used by an English- literate audience. In this case, the Content-Language would properly only include "en". Content-Language MAY be applied to any media type -- it is not limited to textual documents. 14.13. Content-Length The Content-Length entity-header field indicates the size of the entity-body, in decimal number of OCTETs, sent to the recipient or, in the case of the HEAD method, the size of the entity-body that would have been sent had the request been a GET. Content-Length = "Content-Length" ":" 1*DIGIT An example is Content-Length: 3495 Applications SHOULD use this field to indicate the transfer-length of Fielding, et al. Expires May 23, 2007 [Page 130] Internet-Draft HTTP/1.1 November 2006 the message-body, unless this is prohibited by the rules in Section 4.4. Any Content-Length greater than or equal to zero is a valid value. Section 4.4 describes how to determine the length of a message-body if a Content-Length is not given. Note that the meaning of this field is significantly different from the corresponding definition in MIME, where it is an optional field used within the "message/external-body" content-type. In HTTP, it SHOULD be sent whenever the message's length can be determined prior to being transferred, unless this is prohibited by the rules in Section 4.4. 14.14. Content-Location The Content-Location entity-header field MAY be used to supply the resource location for the entity enclosed in the message when that entity is accessible from a location separate from the requested resource's URI. A server SHOULD provide a Content-Location for the variant corresponding to the response entity; especially in the case where a resource has multiple entities associated with it, and those entities actually have separate locations by which they might be individually accessed, the server SHOULD provide a Content-Location for the particular variant which is returned. Content-Location = "Content-Location" ":" ( absoluteURI | relativeURI ) The value of Content-Location also defines the base URI for the entity. The Content-Location value is not a replacement for the original requested URI; it is only a statement of the location of the resource corresponding to this particular entity at the time of the request. Future requests MAY specify the Content-Location URI as the request- URI if the desire is to identify the source of that particular entity. A cache cannot assume that an entity with a Content-Location different from the URI used to retrieve it can be used to respond to later requests on that Content-Location URI. However, the Content- Location can be used to differentiate between multiple entities retrieved from a single requested resource, as described in Section 13.6. If the Content-Location is a relative URI, the relative URI is interpreted relative to the Request-URI. Fielding, et al. Expires May 23, 2007 [Page 131] Internet-Draft HTTP/1.1 November 2006 The meaning of the Content-Location header in PUT or POST requests is undefined; servers are free to ignore it in those cases. 14.15. Content-MD5 The Content-MD5 entity-header field, as defined in [RFC1864], is an MD5 digest of the entity-body for the purpose of providing an end-to- end message integrity check (MIC) of the entity-body. (Note: a MIC is good for detecting accidental modification of the entity-body in transit, but is not proof against malicious attacks.) Content-MD5 = "Content-MD5" ":" md5-digest md5-digest = The Content-MD5 header field MAY be generated by an origin server or client to function as an integrity check of the entity-body. Only origin servers or clients MAY generate the Content-MD5 header field; proxies and gateways MUST NOT generate it, as this would defeat its value as an end-to-end integrity check. Any recipient of the entity- body, including gateways and proxies, MAY check that the digest value in this header field matches that of the entity-body as received. The MD5 digest is computed based on the content of the entity-body, including any content-coding that has been applied, but not including any transfer-encoding applied to the message-body. If the message is received with a transfer-encoding, that encoding MUST be removed prior to checking the Content-MD5 value against the received entity. This has the result that the digest is computed on the octets of the entity-body exactly as, and in the order that, they would be sent if no transfer-encoding were being applied. HTTP extends RFC 1864 to permit the digest to be computed for MIME composite media-types (e.g., multipart/* and message/rfc822), but this does not change how the digest is computed as defined in the preceding paragraph. There are several consequences of this. The entity-body for composite types MAY contain many body-parts, each with its own MIME and HTTP headers (including Content-MD5, Content-Transfer-Encoding, and Content-Encoding headers). If a body-part has a Content- Transfer-Encoding or Content-Encoding header, it is assumed that the content of the body-part has had the encoding applied, and the body- part is included in the Content-MD5 digest as is -- i.e., after the application. The Transfer-Encoding header field is not allowed within body-parts. Conversion of all line breaks to CRLF MUST NOT be done before Fielding, et al. Expires May 23, 2007 [Page 132] Internet-Draft HTTP/1.1 November 2006 computing or checking the digest: the line break convention used in the text actually transmitted MUST be left unaltered when computing the digest. Note: while the definition of Content-MD5 is exactly the same for HTTP as in RFC 1864 for MIME entity-bodies, there are several ways in which the application of Content-MD5 to HTTP entity-bodies differs from its application to MIME entity-bodies. One is that HTTP, unlike MIME, does not use Content-Transfer-Encoding, and does use Transfer