Network Working Group C. Aguado
Internet-Draft Amazon
Intended status: Informational M. Griswold
Expires: 18 September 2024 FullCtl
J. Ramseyer
Meta
A. Servin
Google
T. Strickx
Cloudflare
17 March 2024
Peering API
draft-ramseyer-grow-peering-api-04
Abstract
We propose an API standard for BGP Peering, also known as interdomain
interconnection through global Internet Routing. This API offers a
standard way to request public (settlement-free) peering, verify the
status of a request or BGP session, and list potential connection
locations. The API is backed by PeeringDB OIDC, the industry
standard for peering authentication. We also propose future work to
cover private peering, and alternative authentication methods.
About This Document
This note is to be removed before publishing as an RFC.
The latest revision of this draft can be found at
https://bgp.github.io/draft-ietf-peering-api/draft-peering-api-
ramseyer-protocol.html. Status information for this document may be
found at https://datatracker.ietf.org/doc/draft-ramseyer-grow-
peering-api/.
Source for this draft and an issue tracker can be found at
https://github.com/bgp/draft-ietf-peering-api.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Aguado, et al. Expires 18 September 2024 [Page 1]
Internet-Draft Peering API March 2024
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on 18 September 2024.
Copyright Notice
Copyright (c) 2024 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents (https://trustee.ietf.org/
license-info) in effect on the date of publication of this document.
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document. Code Components
extracted from this document must include Revised BSD License text as
described in Section 4.e of the Trust Legal Provisions and are
provided without warranty as described in the Revised BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1. Business Justification . . . . . . . . . . . . . . . . . 3
2. Conventions and Definitions . . . . . . . . . . . . . . . . . 3
3. Security Considerations . . . . . . . . . . . . . . . . . . . 4
4. Audience . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5. Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5.1. Example Request Flow . . . . . . . . . . . . . . . . . . 5
5.2. AUTH . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5.3. REQUEST . . . . . . . . . . . . . . . . . . . . . . . . . 7
5.4. CLIENT CONFIGURATION . . . . . . . . . . . . . . . . . . 8
5.5. SERVER CONFIGURATION . . . . . . . . . . . . . . . . . . 8
5.6. MONITORING . . . . . . . . . . . . . . . . . . . . . . . 8
5.7. COMPLETION . . . . . . . . . . . . . . . . . . . . . . . 9
6. API Endpoints and Specifications . . . . . . . . . . . . . . 9
6.1. DATA TYPES . . . . . . . . . . . . . . . . . . . . . . . 9
6.2. Endpoints . . . . . . . . . . . . . . . . . . . . . . . . 10
6.2.1. Public Peering over an Internet Exchange (IX) . . . . 11
6.2.2. UTILITY API CALLS . . . . . . . . . . . . . . . . . . 14
6.2.3. Private Peering (DRAFT) . . . . . . . . . . . . . . . 15
7. Public Peering Session Negotiation . . . . . . . . . . . . . 16
8. Private Peering . . . . . . . . . . . . . . . . . . . . . . . 16
9. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 16
10. Possible Extensions . . . . . . . . . . . . . . . . . . . . . 17
11. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 17
12. References . . . . . . . . . . . . . . . . . . . . . . . . . 17
Aguado, et al. Expires 18 September 2024 [Page 2]
Internet-Draft Peering API March 2024
12.1. Normative References . . . . . . . . . . . . . . . . . . 17
12.2. Informative References . . . . . . . . . . . . . . . . . 18
Appendix A. Acknowledgments . . . . . . . . . . . . . . . . . . 18
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 19
1. Introduction
The Peering API is a mechanism that allows networks to automate
interdomain interconnection between two Autonomous Systems (AS)
through the Border Gateway Protocol 4 ([RFC4271]). Using the API,
networks will be able to automatically request and accept peering
interconnections between Autonomous Systems in public or private
scenarios in a time faster than it would take to configure sessions
manually. By speeding up the peering turn-up process and removing
the need for manual involvement in peering, the API and automation
will ensure that networks can get interconnected as fast, reliably,
cost-effectively, and efficiently as possible. As a result, this
improves end-user performance for all applications using networks
interconnection supporting the Peering API.
1.1. Business Justification
By using the Peering API, entities requesting and accepting peering
can significantly improve the process to turn up interconnections by:
* Reducing in person-hours spent configuring peering
* Reducing configuration mistakes by reducing human interaction
* And by peering, reducing network latency through expansion of
interconnection relationships
2. Conventions and Definitions
All terms used in this document will be defined here:
* Initiator: Network that wants to peer
* Receiver: Network that is receiving communications about peering
* Configured: peering session that is set up on one side
* Established: session is already defined as per BGP-4 specification
Section 8.2.2 of [RFC4271]
Aguado, et al. Expires 18 September 2024 [Page 3]
Internet-Draft Peering API March 2024
3. Security Considerations
As peering connections exchange real Internet traffic, this API
requires a security component to verify that the requestor is
authorized to operate the interconnection on behalf of such AS. In
this initial proposal, the API follows an authorization model based
on OpenID Connect [oidc] and OAuth 2.0 ([RFC6749]) where the
Authorization Server is PeeringDB. The choice of OpenID Connect is
to use the standardized token exchange format based on JSON Web
Tokens ([RFC7519]) which allows interoperation with existing web-
based application flows. JWT tokens also supply sufficient claims to
implement receiver-side authorization decisions when used as bearer
access tokens ([RFC9068]) and for which best common practices also
exist ([RFC8725]). After further discussion, the authors decided to
offer alternate authentication options to accommodate the security
concerns of different parties. As peers may require varying security
standards, this document proposes to support PeeringDB OIDC as the
base requirement, with optional security extensions in addition (RPKI
([RFC6480]) or alternative OIDC Authorization Servers, for example).
This document hopes that, through the RFC process, the Working Group
can come to a consensus on a base "authorization standard," to ease
adoption for peering participants.
Of particular interest is RPKI. PeeringDB OIDC allows the API to
identify who the requesting party is, while RPKI-signing allows such
requesting party to prove that they own some of the Internet-assigned
resources referenced in the request. This combination provides a low
entry barrier to create an identity federation across the
participating ASs' API with a stronger guarantee of resource
ownership against potential for misattribution and repudiation. The
authors recognize that not all partners have the time or engineering
resources to support all authorization standards, so the API
reference implementations will offer an extensible security mechanism
to meet varying identity and security requirements. For RPKI-based
authentication, this document refers to RPKI Signed Checklists (RSCs)
([RFC9323]).
The Peering API does not enforce any kind of peering policy on the
incoming requests. It is left to the server implementation to
enforce the AS-specific peering policy. The authors encourage each
peer to consider the needs of their peering policy and implement
request validation as desired.
Aguado, et al. Expires 18 September 2024 [Page 4]
Internet-Draft Peering API March 2024
4. Audience
The Peering API aims to simplify peering interconnection
configuration. To that end, the API can be called by either a human
or some automation. A network engineer can submit API requests
through a client-side tool, and configure sessions by hand or through
existing tooling. Alternately, an automated service can request BGP
sessions through some trigger or regularly scheduled request (for
example, upon joining a new peering location, or through regular
polling of potential peers). That automated client can then
configure the client sessions through its own tooling. For ease of
exchanging peering requests, the authors suggest peers to maintain
both a client and a server for the API. Toward the goal of
streamlining peering configuration, the authors encourage peers to
automate their network configuration wherever possible, but do not
require full automation to use this API.
5. Protocol
The Peering API follows the Representational State Transfer ([rest])
architecture where sessions, locations, and maintenance events are
the resources the API represents and is modeled after the OpenAPI
standard [openapi]. Using the token bearer model ([RFC6750]), a
client application can request to add or remove peering sessions,
list potential interconnection locations, and query for upcoming
maintenance events on behalf of the AS resource owner.
5.1. Example Request Flow
The diagram below outlines the proposed API flow.
OIDC Authentication
+-----------+ +-------+ +-----------+
| Initiator | | Peer | | PeeringDB |
+-----------+ +-------+ +-----------+
| | |
| OIDC Authentication | |
|--------------------------------------------------------->|
| | |
| Provide auth code |
|<---------------------------------------------------------|
| | |
| Send auth code to Peer | |
|--------------------------------------------------------->|
| | |
| | Exchange auth code for token |
| |----------------------------->|
Aguado, et al. Expires 18 September 2024 [Page 5]
Internet-Draft Peering API March 2024
| | |
| | Return token |
| |<-----------------------------|
| |
| Peer determines permissions based on token
| |
| Send OK back to Initiator |
|<--------------------------|
Operations, loop until peering is complete.
List Locations
+-----------+ +-------+
| Initiator | | Peer |
+-----------+ +-------+
| |
| QUERY peering locations (peer type, ASN, auth code) |
|----------------------------------------------------------->|
| |
| Reply with peering locations |
| or errors (401, 406, 451, etc.) |
|<-----------------------------------------------------------|
Request session status
+-----------+ +-------+
| Initiator | | Peer |
+-----------+ +-------+
| |
| QUERY request status using request ID & auth code |
|----------------------------------------------------------->|
| |
| Reply with session status |
| (200, 404, 202, etc.) |
|<-----------------------------------------------------------|
5.2. AUTH
First, the initiating OAuth2 Client is also the Resource Owner (RO)
so it can follow the OAuth2 client credentials grant Section 4.4 of
[RFC6749]. In this example, the client will use PeeringDB OIDC
credentials to acquire a JWT access token that is scoped for use with
the receiving API. On successful authentication, PeeringDB provides
the Resource Server (RS) with the client's email (for potential
manual discussion), along with the client's usage entitlements (known
as OAuth2 scopes), to confirm the client is permitted to make API
Aguado, et al. Expires 18 September 2024 [Page 6]
Internet-Draft Peering API March 2024
requests on behalf of the initiating AS.
5.3. REQUEST
1. ADD SESSION (CLIENT BATCHED REQUEST)
* The initiator's client provides a set of:
- Structure:
1. Local ASN (receiver)
2. Local IP
3. Peer ASN (initiator)
4. Peer IP
5. Peer Type (public or private)
6. MD5 (optional with encoding agreed outside of this
specification)
7. Location (Commonly agreed identifier of the BGP speaker,
e.g. PeeringDB IX lan ID)
* The receiver's expected actions:
- The server confirms requested clientASN in list of authorized
ASNs.
- Optional: checks traffic levels, prefix limit counters, other
desired internal checks.
1. ADD SESSIONS (SERVER BATCHED RESPONSE)
* APPROVAL CASE
- Server returns a list with the structure for each of the
acceptable peering sessions. Note: this structure may also
contain additional attributes such as the server generated
session ID.
* PARTIAL APPROVAL CASE
- Server returns a list with the structure for each of the
acceptable peering sessions as in the approval case. The
server also returns a list of sessions that have not deemed as
Aguado, et al. Expires 18 September 2024 [Page 7]
Internet-Draft Peering API March 2024
validated or acceptable to be created. The set of sessions
accepted and rejected is disjoint and the join of both sets
matches the cardinality of the requested sessions.
* REJECTION CASE
- Server returns an error message which indicates that all of the
sessions requested have been rejected and the reason for it.
5.4. CLIENT CONFIGURATION
The client then configures the chosen peering sessions asynchronously
using their internal mechanisms. For every session that the server
rejected, the client removes that session from the list to be
configured.
5.5. SERVER CONFIGURATION
The server configures all sessions that are in its list of approved
peering sessions from its reply to the client.
5.6. MONITORING
Both client and server wait for sessions to establish. At any point,
client may send a "GET STATUS" request to the server, to request the
status of the session (by session ID). The client will send a
structure along with the request, as follows:
* structure:
- Session ID
- Local ASN (server)
- Local IP
- Peer ASN (client)
- Peer IP
- Peer Type
- MD5 (optional, as defined above)
- Location
- Status
Aguado, et al. Expires 18 September 2024 [Page 8]
Internet-Draft Peering API March 2024
The server then responds with the same structure, with the
information that it understands (status, etc).
5.7. COMPLETION
If both sides report that the session is established, then peering is
complete. If one side does not configure sessions within the
server's acceptable configuration window (TimeWindow), then the
server is entitled to remove the configured sessions and report
"Unestablished" to the client.
6. API Endpoints and Specifications
Each peer needs a public API endpoint that will implement the API
protocol. This API should be publicly listed in peeringDB and also
as a potential expansion of [RFC9092] which could provide endpoint
integration to WHOIS ([RFC3912]). Each API endpoint should be fuzz-
tested and protected against abuse. Attackers should not be able to
access internal systems using the API. Every single request should
come in with a unique GUID called RequestID that maps to a peering
request for later reference. This GUID format should be standardized
across all requests. This GUID should be provided by the receiver
once it receives the request and must be embedded in all
communication. If there is no RequestID present then that should be
interpreted as a new request and the process starts again. An email
address is needed for communication if the API fails or is not
implemented properly (can be obtained through PeeringDB).
For a programmatic specification of the API, please see the public
Github ([autopeer]).
This initial draft fully specifies the Public Peering endpoints.
Private Peering and Maintenance are under discussion, and the authors
invite collaboration and discussion from interested parties.
6.1. DATA TYPES
Please see specification ([autopeer]) for OpenAPI format.
Peering Location
Contains string field listing the desired peering location in format
pdb:ix:$IX_ID, and an enum specifying peering type (public or
private).
Session Status
Aguado, et al. Expires 18 September 2024 [Page 9]
Internet-Draft Peering API March 2024
Status of BGP Session, both as connection status and approval status
(Established, Pending, Approved, Rejected, Down, Unestablished, etc)
Session Array
Array of potential BGP sessions, with request UUID. Request UUID is
optional for client, and required for server. Return URL is
optional, and indicates the client's Peering API endpoint. The
client's return URL is used by the server to request additional
sessions. Client may provide initial UUID for client-side tracking,
but the server UUID will be the final definitive ID. RequestID will
not change across the request.
BGP Session
A structure that describes a BGP session and contains the following
elements:
* local_asn (ASN of requestor)
* local_ip (IP of requestor, v4 or v6)
* peer_asn (server ASN)
* peer_ip (server-side IP)
* peer_type (public or private)
* md5 (optional, as defined above)
* location (Peering Location, as defined above)
* status (Session Status, as defined above)
* session_id (of individual session and generated by the server)
Error
API Errors, for field validation errors in requests, and request-
level errors.
The above is sourced largely from the linked OpenAPI specification.
6.2. Endpoints
(As defined in [autopeer]). On each call, there should be rate
limits, allowed senders, and other optional restrictions.
Aguado, et al. Expires 18 September 2024 [Page 10]
Internet-Draft Peering API March 2024
6.2.1. Public Peering over an Internet Exchange (IX)
* /sessions: ADD/RETRIEVE sessions visible to the calling PEER
- Batch create new session resources
o Establish new BGP sessions between peers, at the desired
exchange.
o Below is based on OpenAPI specification: [autopeer].
o POST /sessions
+ Request body: Session Array
+ Responses:
* 200 OK:
- Contents: Session Array (all sessions in request
accepted for configuration). Should not all the
sessions be accepted, the response also contains a
list of sessions and the respective errors.
* 400:
- Error
* 403:
- Unauthorized to perform the operation
- List all session resources. The response is paginated.
o Given a request ID, query for the status of that request.
o Given an ASN without request ID, query for status of all
connections between client and server.
o Below is based on OpenAPI specification: [autopeer].
o GET /sessions
+ Request parameters:
* asn (requesting client's asn)
* request_id (optional, UUID of request)
Aguado, et al. Expires 18 September 2024 [Page 11]
Internet-Draft Peering API March 2024
* max_results (integer to indicate an upper bound for a
given response page)
* next_token (opaque and optional string received on a
previous response page and which allows the server to
produce the next page of results. Its absence
indicates to the server that the first page is
expected)
+ Response:
* 200: OK
- Contents: Session Array of sessions in request_id,
if provided. Else, all existing and in-progress
sessions between client ASN and server.
o next_token (opaque and optional string the
server expects to be passed back on the request
for the next page. Its absence indicates to the
client that no more pages are available)
* 400:
- Error (example: request_id is invalid)
* 403:
- Unauthorized to perform the operation
* /sessions/{session_id}: Operate on individual sessions
- Retrieve an existing session resource
o Below is based on OpenAPI specification: [autopeer].
o GET /sessions/{session_id}
+ Request parameters:
* session_id returned by the server on creation or
through the session list operation.
+ Responses:
* 200 OK:
- Contents: Session structure with current attributes
Aguado, et al. Expires 18 September 2024 [Page 12]
Internet-Draft Peering API March 2024
* 400:
- Error (example: session_id is invalid)
* 403:
- Unauthorized to perform the operation
* 404:
- The session referred by the specified session_id
does not exist or is not visible to the caller
- Delete a session.
o Given a session ID, delete it which effectively triggers an
depeering from the initiator.
o Below is based on OpenAPI specification: [autopeer].
o DELETE /sessions/{session_id}
+ Request parameters:
* session_id returned by the server on creation or
through the session list operation.
+ Response:
* 204: OK
- Contents: empty response as the session is
processed and hard deleted
* 400:
- Error (example: session_id is invalid)
* 403:
- Unauthorized to perform the operation
* 404:
- The session referred by the specified session_id
does not exist or is not visible to the caller
Aguado, et al. Expires 18 September 2024 [Page 13]
Internet-Draft Peering API March 2024
6.2.2. UTILITY API CALLS
Endpoints which provide useful information for potential
interconnections.
* /locations: LIST POTENTIAL PEERING LOCATIONS
- List potential peering locations, both public and private. The
response is paginated.
o Below is based on OpenAPI specification: [autopeer].
o GET /locations
+ Request parameters:
* asn (Server ASN, with which to list potential
connections)
* location_type (Optional: Peering Location)
* max_results (integer to indicate an upper bound for a
given response page)
* next_token (opaque and optional string received on a
previous response page and which allows the server to
produce the next page of results. Its absence
indicates to the server that the first page is
expected)
+ Response:
* 200: OK
- Contents: List of Peering Locations.
o next_token (opaque and optional string the
server expects to be passed back on the request
for the next page. Its absence indicates to the
client that no more pages are available)
* 400:
- Error
* 403:
- Unauthorized to perform the operation
Aguado, et al. Expires 18 September 2024 [Page 14]
Internet-Draft Peering API March 2024
6.2.3. Private Peering (DRAFT)
* ADD/AUGMENT PNI
* Parameters:
- Peer ASN
- Facility
- email address (contact)
- Action type: add/augment
- LAG struct:
o IPv4
o IPv6
o Circuit ID
- Who provides LOA? (and where to provide it).
* Response:
- 200:
o LAG struct, with server data populated
o LOA or way to receive it
o Request ID
- 40x: rejections
* REMOVE PNI
- As ADD/AUGMENT in parameters. Responses will include a
requestID and status.
Aguado, et al. Expires 18 September 2024 [Page 15]
Internet-Draft Peering API March 2024
7. Public Peering Session Negotiation
As part of public peering configuration, this draft must consider how
the client and server should handshake at which sessions to configure
peering. At first, a client will request sessions A, B, and C. The
server may choose to accept all sessions A, B, and C. At this point,
configuration proceeds as normal. However, the server may choose to
reject session B. At that point, the server will reply back with A
and C marked as "Accepted," and B as "Rejected." The server will
then configure A and C, and wait for the client to configure A and C.
If the client configured B as well, it will not come up.
This draft encourages peers to set up garbage collection for
unconfigured or down peering sessions, to remove stale configuration
and maintain good router hygiene.
Related to rejection, if the server would like to configure
additional sessions with the client, the server may either reject all
the session that do not meet the criteria caused by such absence in
the client's request or approve the client's request and issue a
separate request to the client's server requesting those additional
peering sessions D and E. The server will configure D and E on their
side, and D and E will become part of the sessions requested in the
UUID. The client may choose whether or not to accept those
additional sessions. If they do, the client should configure D and E
as well. If they do not, the client will not configure D and E, and
the server should garbage-collect those pending sessions.
As part of the IETF discussion, the authors would like to discuss how
to coordinate which side unfilters first. Perhaps this information
could be conveyed over a preferences vector.
8. Private Peering
Through future discussion with the IETF, the specification for
private peering will be solidified. Of interest for discussion
includes Letter of Authorization (LOA) negotiation, and how to
coordinate unfiltering and configuration checks.
9. Maintenance
This draft does not want to invent a new ticketing system. However,
there is an opportunity in this API to provide maintenance
notifications to peering partners. If there is interest, this draft
would extend to propose a maintenance endpoint, where the server
could broadcast upcoming and current maintenance windows.
A maintenance message would follow a format like:
Aguado, et al. Expires 18 September 2024 [Page 16]
Internet-Draft Peering API March 2024
* Title: string
* Start Date: date maintenance start(s/ed): UTC
* End Date: date maintenance ends: UTC
* Area: string or enum
* Details: freeform string
The "Area" field could be a freeform string, or could be a parseable
ENUM, like (BGP, PublicPeering, PrivatePeering, Configuration,
Caching, DNS, etc).
Past maintenances will not be advertised.
10. Possible Extensions
The authors acknowledge that route-server configuration may also be
of interest for this proposed API, and look forward to future
discussions in this area.
11. IANA Considerations
This document has no IANA actions.
12. References
12.1. Normative References
[autopeer] "Github repository with the API specification and
diagrams", n.d., .
[oidc] "OpenID.Core", n.d.,
.
[openapi] "OpenAPI-v3.1.0", n.d.,
.
[rest] Fielding, R. T., "Architectural Styles and the Design of
Network-based Software Architectures", 2000,
.
[RFC6749] Hardt, D., Ed., "The OAuth 2.0 Authorization Framework",
RFC 6749, DOI 10.17487/RFC6749, October 2012,
.
Aguado, et al. Expires 18 September 2024 [Page 17]
Internet-Draft Peering API March 2024
[RFC6750] Jones, M. and D. Hardt, "The OAuth 2.0 Authorization
Framework: Bearer Token Usage", RFC 6750,
DOI 10.17487/RFC6750, October 2012,
.
[RFC7519] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token
(JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015,
.
[RFC8725] Sheffer, Y., Hardt, D., and M. Jones, "JSON Web Token Best
Current Practices", BCP 225, RFC 8725,
DOI 10.17487/RFC8725, February 2020,
.
[RFC9068] Bertocci, V., "JSON Web Token (JWT) Profile for OAuth 2.0
Access Tokens", RFC 9068, DOI 10.17487/RFC9068, October
2021, .
12.2. Informative References
[RFC3912] Daigle, L., "WHOIS Protocol Specification", RFC 3912,
DOI 10.17487/RFC3912, September 2004,
.
[RFC4271] Rekhter, Y., Ed., Li, T., Ed., and S. Hares, Ed., "A
Border Gateway Protocol 4 (BGP-4)", RFC 4271,
DOI 10.17487/RFC4271, January 2006,
.
[RFC6480] Lepinski, M. and S. Kent, "An Infrastructure to Support
Secure Internet Routing", RFC 6480, DOI 10.17487/RFC6480,
February 2012, .
[RFC9092] Bush, R., Candela, M., Kumari, W., and R. Housley,
"Finding and Using Geofeed Data", RFC 9092,
DOI 10.17487/RFC9092, July 2021,
.
[RFC9323] Snijders, J., Harrison, T., and B. Maddison, "A Profile
for RPKI Signed Checklists (RSCs)", RFC 9323,
DOI 10.17487/RFC9323, November 2022,
.
Appendix A. Acknowledgments
The authors would like to thank their collaborators, who implemented
API versions and provided valuable feedback on the design.
Aguado, et al. Expires 18 September 2024 [Page 18]
Internet-Draft Peering API March 2024
* Ben Blaustein (Meta)
* Jakub Heichman (Meta)
* Stefan Prattner (20c)
* Ben Ryall (Meta)
* Erica Salvaneschi (Cloudflare)
* Job Snijders (Fastly)
* David Tuber (Cloudflare)
* Aaron Rose (Amazon)
* Prithvi Nath Manikonda (Amazon)
Authors' Addresses
Carlos Aguado
Amazon
Email: crlsa@amazon.com
Matt Griswold
FullCtl
Email: grizz@20c.com
Jenny Ramseyer
Meta
Email: ramseyer@meta.com
Arturo Servin
Google
Email: arturolev@google.com
Tom Strickx
Cloudflare
Email: tstrickx@cloudflare.com
Aguado, et al. Expires 18 September 2024 [Page 19]