TOC 
Network Working GroupJ. Reschke
Internet-Draftgreenbytes
Updates: 2616 (if approved)August 30, 2010
Intended status: Standards Track 
Expires: March 3, 2011 


Use of the Content-Disposition Header Field in the Hypertext Transfer Protocol (HTTP)
draft-reschke-rfc2183-in-http-03

Abstract

HTTP/1.1 defines the Content-Disposition response header field, but points out that it is not part of the HTTP/1.1 Standard. This specification takes over the definition and registration of Content-Disposition, as used in HTTP, and clarifies internationalization aspects.

Editorial Note (To be removed by RFC Editor before publication)

This specification is expected to replace the definition of Content-Disposition in the HTTP/1.1 specification, as currently revised by the IETF HTTPbis working group. See also http://www3.tools.ietf.org/wg/httpbis/trac/ticket/123.

Distribution of this document is unlimited. Although this is not a work item of the HTTPbis Working Group, comments should be sent to the Hypertext Transfer Protocol (HTTP) mailing list at ietf-http-wg@w3.org, which may be joined by sending a message with subject "subscribe" to ietf-http-wg-request@w3.org.

Discussions of the HTTPbis Working Group are archived at http://lists.w3.org/Archives/Public/ietf-http-wg/.

XML versions, latest edits and the issues list for this document are available from http://greenbytes.de/tech/webdav/#draft-reschke-rfc2183-in-http. A collection of test cases is available at http://greenbytes.de/tech/tc2231/.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”

This Internet-Draft will expire on March 3, 2011.

Copyright Notice

Copyright (c) 2010 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.



Table of Contents

1.  Introduction
2.  Notational Conventions
3.  Header Field Definition
    3.1.  Grammar
    3.2.  Disposition Type
    3.3.  Disposition Parameter: 'Filename'
    3.4.  Disposition Parameter: Extensions
    3.5.  Extensibility
4.  Examples
5.  Internationalization Considerations
6.  Security Considerations
7.  IANA Considerations
    7.1.  Registry for Disposition Values and Parameter
    7.2.  Header Field Registration
8.  Acknowledgements
9.  References
    9.1.  Normative References
    9.2.  Informative References
Appendix A.  Changes from the RFC 2616 Definition
Appendix B.  Differences compared to RFC 2183
Appendix C.  Alternative Approaches to Internationalization
    C.1.  RFC 2047 Encoding
    C.2.  Percent Encoding
    C.3.  Encoding Sniffing
    C.4.  Implementations
Appendix D.  Change Log (to be removed by RFC Editor before publication)
    D.1.  Since draft-reschke-rfc2183-in-http-00
    D.2.  Since draft-reschke-rfc2183-in-http-01
    D.3.  Since draft-reschke-rfc2183-in-http-02
Appendix E.  Resolved issues (to be removed by RFC Editor before publication)
    E.1.  quoted
    E.2.  asciivsiso
    E.3.  deplboth
    E.4.  registry
    E.5.  docfallback
Appendix F.  Open issues (to be removed by RFC Editor prior to publication)
    F.1.  edit
§  Index




 TOC 

1.  Introduction

HTTP/1.1 defines the Content-Disposition response header field in Section 19.5.1 of [RFC2616] (Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” June 1999.), but points out that it is not part of the HTTP/1.1 Standard (Section 15.5):

Content-Disposition is not part of the HTTP standard, but since it is widely implemented, we are documenting its use and risks for implementors.

This specification takes over the definition and registration of Content-Disposition, as used in HTTP. Based on interoperability testing with existing User Agents, it fully defines a profile of the features defined in the Multipurpose Internet Mail Extensions (MIME) variant ([RFC2183] (Troost, R., Dorner, S., and K. Moore, “Communicating Presentation Information in Internet Messages: The Content-Disposition Header Field,” August 1997.)) of the header field, and also clarifies internationalization aspects.



 TOC 

2.  Notational Conventions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119] (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.).

This specification uses the augmented BNF notation defined in Section 2.1 of [RFC2616] (Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” June 1999.), including its rules for linear whitespace (LWS).



 TOC 

3.  Header Field Definition

The Content-Disposition response header field is used to convey additional information about how to process the response payload, and also can be used to attach additional metadata, such as the filename.



 TOC 

3.1.  Grammar

  content-disposition = "Content-Disposition" ":"
                         disposition-type *( ";" disposition-parm )

  disposition-type    = "inline" | "attachment" | disp-ext-type
                      ; case-insensitive
  disp-ext-type       = token

  disposition-parm    = filename-parm | disp-ext-parm

  filename-parm       = "filename" "=" value
                      | "filename*" "=" ext-value

  disp-ext-parm       = token "=" value
                      | ext-token "=" ext-value
  ext-token           = <the characters in token, followed by "*">

Defined in [RFC2616] (Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” June 1999.):

  token       = <token, defined in [RFC2616], Section 2.2>
  value       = <value, defined in [RFC2616], Section 3.6>

Defined in [RFC5987] (Reschke, J., “Applicability of RFC 2231 Encoding to Hypertext Transfer Protocol (HTTP) Headers,” August 2010.):

  ext-value   = <ext-value, defined in [RFC5987], Section 3.2>


 TOC 

3.2.  Disposition Type

If the disposition type matches "attachment" (case-insensitively), this indicates that the user agent should not display the response, but directly enter a "save as..." dialog.

On the other hand, if it matches "inline" (case-insensitively), this implies default processing.

Other disposition types SHOULD be handled the same way as "attachment" (see also [RFC2183] (Troost, R., Dorner, S., and K. Moore, “Communicating Presentation Information in Internet Messages: The Content-Disposition Header Field,” August 1997.), Section 2.8).



 TOC 

3.3.  Disposition Parameter: 'Filename'

The parameters "filename" and "filename*", to be matched case-insensitively, provide information on how to construct a filename for storing the message payload.

Depending on the disposition type, this information might be used right away (in the "save as..." interaction caused for the "attachment" disposition type), or later on (for instance, when the user decides to save the contents of the current page being displayed).

"filename" and "filename*" behave the same, except that "filename*" uses the encoding defined in [RFC5987] (Reschke, J., “Applicability of RFC 2231 Encoding to Hypertext Transfer Protocol (HTTP) Headers,” August 2010.), allowing the use of characters not present in the ISO-8859-1 character set ([ISO‑8859‑1] (International Organization for Standardization, “Information technology -- 8-bit single-byte coded graphic character sets -- Part 1: Latin alphabet No. 1,” 1998.)). When both "filename" and "filename*" are present, a recipient SHOULD pick "filename*" and ignore "filename" - this will make it possible to send the same header value to clients that do not support "filename*".

It is essential that user agents treat the specified filename as advisory only, thus be very careful in extracting the desired information. In particular:



 TOC 

3.4.  Disposition Parameter: Extensions

To enable future extensions, unknown parameters SHOULD be ignored (see also [RFC2183] (Troost, R., Dorner, S., and K. Moore, “Communicating Presentation Information in Internet Messages: The Content-Disposition Header Field,” August 1997.), Section 2.8).



 TOC 

3.5.  Extensibility

Note that Section 9 of [RFC2183] (Troost, R., Dorner, S., and K. Moore, “Communicating Presentation Information in Internet Messages: The Content-Disposition Header Field,” August 1997.) defines IANA registries both for disposition types and disposition parameters. This registry is shared by different protocols using Content-Disposition, such as MIME and HTTP. Therefore, not all registered values may make sense in the context of HTTP.



 TOC 

4.  Examples

Direct UA to show "save as" dialog, with a filename of "foo.html":

Content-Disposition: Attachment; filename=foo.html

Direct UA to behave as if the Content-Disposition header field wasn't present, but to remember the filename "foo.html" for a subsequent save operation:

Content-Disposition: INLINE; FILENAME= "foo.html"

Direct UA to show "save as" dialog, with a filename of "an example":

Content-Disposition: Attachment; Filename*=UTF-8'en'an%20example

Note that this example uses the extended encoding defined in [RFC5987] (Reschke, J., “Applicability of RFC 2231 Encoding to Hypertext Transfer Protocol (HTTP) Headers,” August 2010.) to specify that the natural language of the filename is English, and also to encode the space character which is not allowed in the token production.

Direct UA to show "save as" dialog, with a filename containing the Unicode character U+20AC (EURO SIGN):

Content-Disposition: attachment; filename*= UTF-8''%e2%82%ac%20rates

Here, the encoding defined in [RFC5987] (Reschke, J., “Applicability of RFC 2231 Encoding to Hypertext Transfer Protocol (HTTP) Headers,” August 2010.) is also used to encode the non-ISO-8859-1 character.

Same as above, but adding the "filename" parameter for compatibility with user agents not implementing RFC 5987:

Content-Disposition: attachment; filename="EURO rates";
                                 filename*=utf-8''%e2%82%ac%20rates

Note: as of August 2010, many user agents unfortunately did not properly handle unexpected parameters, and some that implement RFC 5987 did not pick the extended parameter when both were present.



 TOC 

5.  Internationalization Considerations

The "filename*" parameter (Section 3.3 (Disposition Parameter: 'Filename')), using the encoding defined in [RFC5987] (Reschke, J., “Applicability of RFC 2231 Encoding to Hypertext Transfer Protocol (HTTP) Headers,” August 2010.), allows the server to transmit characters outside the ISO-8859-1 character set, and also to optionally specify the language in use.

Future parameters might also require internationalization, in which case the same encoding can be used.



 TOC 

6.  Security Considerations

Using server-supplied information for constructing local filenames introduces many risks. These are summarized in Section 3.3 (Disposition Parameter: 'Filename').

Furthermore, implementers also ought to be aware of the Security Considerations applying to HTTP (see Section 15 of [RFC2616] (Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” June 1999.)), and also the parameter encoding defined in [RFC5987] (Reschke, J., “Applicability of RFC 2231 Encoding to Hypertext Transfer Protocol (HTTP) Headers,” August 2010.) (see Section 5).



 TOC 

7.  IANA Considerations



 TOC 

7.1.  Registry for Disposition Values and Parameter

This specification does not introduce any changes to the registration procedures for disposition values and parameters that are defined in Section 9 of [RFC2183] (Troost, R., Dorner, S., and K. Moore, “Communicating Presentation Information in Internet Messages: The Content-Disposition Header Field,” August 1997.).



 TOC 

7.2.  Header Field Registration

This document updates the definition of the Content-Disposition HTTP header field in the permanent HTTP header field registry (see [RFC3864] (Klyne, G., Nottingham, M., and J. Mogul, “Registration Procedures for Message Header Fields,” September 2004.)).

Header field name:
Content-Disposition
Applicable protocol:
http
Status:
standard
Author/Change controller:
IETF
Specification document:
this specification (Section 3 (Header Field Definition))



 TOC 

8.  Acknowledgements

Thanks to Rolf Eike Beer, Alfred Hoenes, and Roar Lauritzsen for their valuable feedback.



 TOC 

9.  References



 TOC 

9.1. Normative References

[ISO-8859-1] International Organization for Standardization, “Information technology -- 8-bit single-byte coded graphic character sets -- Part 1: Latin alphabet No. 1,” ISO/IEC 8859-1:1998, 1998.
[RFC2119] Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” BCP 14, RFC 2119, March 1997.
[RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” RFC 2616, June 1999.
[RFC5987] Reschke, J., “Applicability of RFC 2231 Encoding to Hypertext Transfer Protocol (HTTP) Headers,” RFC 5987, August 2010.


 TOC 

9.2. Informative References

[RFC2046] Freed, N. and N. Borenstein, “Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types,” RFC 2046, November 1996.
[RFC2047] Moore, K., “MIME (Multipurpose Internet Mail Extensions) Part Three: Message Header Extensions for Non-ASCII Text,” RFC 2047, November 1996.
[RFC2183] Troost, R., Dorner, S., and K. Moore, “Communicating Presentation Information in Internet Messages: The Content-Disposition Header Field,” RFC 2183, August 1997.
[RFC2231] Freed, N. and K. Moore, “MIME Parameter Value and Encoded Word Extensions: Character Sets, Languages, and Continuations,” RFC 2231, November 1997.
[RFC3629] Yergeau, F., “UTF-8, a transformation format of ISO 10646,” RFC 3629, STD 63, November 2003.
[RFC3864] Klyne, G., Nottingham, M., and J. Mogul, “Registration Procedures for Message Header Fields,” BCP 90, RFC 3864, September 2004.
[RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, “Uniform Resource Identifier (URI): Generic Syntax,” RFC 3986, STD 66, January 2005.


 TOC 

Appendix A.  Changes from the RFC 2616 Definition

Compared to Section 19.5.1 of [RFC2616] (Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” June 1999.), the following normative changes reflecting actual implementations have been made:



 TOC 

Appendix B.  Differences compared to RFC 2183

Section 2 of [RFC2183] (Troost, R., Dorner, S., and K. Moore, “Communicating Presentation Information in Internet Messages: The Content-Disposition Header Field,” August 1997.) defines several additional disposition parameters: "creation-date", "modification-date", "quoted-date-time", and "size". These do not appear to be implemented by any user agent, thus have been omitted from this specification.



 TOC 

Appendix C.  Alternative Approaches to Internationalization

By default, HTTP header field parameters cannot carry characters outside the ISO-8859-1 ([ISO‑8859‑1] (International Organization for Standardization, “Information technology -- 8-bit single-byte coded graphic character sets -- Part 1: Latin alphabet No. 1,” 1998.)) character encoding (see [RFC2616] (Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1,” June 1999.), Section 2.2). For the "filename" parameter, this of course is an unacceptable restriction.

Unfortunately, user agent implementers have not managed to come up with an interoperable approach, although the IETF Standards Track specifies exactly one solution ([RFC2231] (Freed, N. and K. Moore, “MIME Parameter Value and Encoded Word Extensions: Character Sets, Languages, and Continuations,” November 1997.), clarified and profiled for HTTP in [RFC5987] (Reschke, J., “Applicability of RFC 2231 Encoding to Hypertext Transfer Protocol (HTTP) Headers,” August 2010.)).

For completeness, the sections below describe the various approaches that have been tried, and explains how they are inferior to the RFC 5987 encoding used in this specification.



 TOC 

C.1.  RFC 2047 Encoding

RFC 2047 defines an encoding mechanism for header fields, but this encoding is not supposed to be used for header field parameters - see Section 5 of [RFC2047] (Moore, K., “MIME (Multipurpose Internet Mail Extensions) Part Three: Message Header Extensions for Non-ASCII Text,” November 1996.):

An 'encoded-word' MUST NOT appear within a 'quoted-string'.

...

An 'encoded-word' MUST NOT be used in parameter of a MIME Content-Type or Content-Disposition field, or in any structured field body except within a 'comment' or 'phrase'.

In practice, some user agents implement the encoding, some do not (exposing the encoded string to the user), and some get confused by it.



 TOC 

C.2.  Percent Encoding

Some user agents accept percent encoded ([RFC3986] (Berners-Lee, T., Fielding, R., and L. Masinter, “Uniform Resource Identifier (URI): Generic Syntax,” January 2005.), Section 2.1) sequences of characters encoded using the UTF-8 ([RFC3629] (Yergeau, F., “UTF-8, a transformation format of ISO 10646,” November 2003.)) character encoding.

In practice, this is hard to use because those user agents that do not support it will display the escaped character sequence to the user.

Furthermore, the first user agent to implement this did choose the encoding based on local settings; thus making it very hard to use in multi-lingual environments.



 TOC 

C.3.  Encoding Sniffing

Some user agents inspect the value (which defaults to ISO-8859-1) and switch to UTF-8 when it seems to be more likely to be the correct interpretation.

As with the approaches above, this is not interoperable and furthermore risks misinterpreting the actual value.



 TOC 

C.4.  Implementations

Unfortunately, as of August 2010, neither the encoding defined in RFCs 2231 and 5789, nor any of the alternate approaches discussed above was implemented interoperably. Thus, this specification recommends the approach defined in RFC 5987, which at least has the advantage of actually being specified properly.

The table below shows the implementation support for the various approaches: [impls] (Discuss: should we mention the implementation status of actual UAs in a RFC? Up to the IESG to decide...)

User AgentRFC 2231/5987RFC 2047Percent EncodingEncoding Sniffing
Chrome no yes yes yes
Firefox yes (*) yes no yes
Internet Explorer no no yes no
Konqueror yes no no no
Opera yes (*) no no no
Safari no no no yes

(*) Does not implement the fallback behavior to "filename" described in Section 3.3 (Disposition Parameter: 'Filename').



 TOC 

Appendix D.  Change Log (to be removed by RFC Editor before publication)



 TOC 

D.1.  Since draft-reschke-rfc2183-in-http-00

Adjust terminology ("header" -> "header field"). Update rfc2231-in-http reference.



 TOC 

D.2.  Since draft-reschke-rfc2183-in-http-01

Update rfc2231-in-http reference. Actually define the "filename" parameter. Add internationalization considerations. Add examples using the RFC 5987 encoding. Add overview over other approaches, plus a table reporting implementation status. Add and resolve issue "nodep2183". Add issues "asciivsiso", "deplboth", "quoted", and "registry".



 TOC 

D.3.  Since draft-reschke-rfc2183-in-http-02

Add and close issue "docfallback". Close issues "asciivsiso", "deplboth", "quoted", and "registry".



 TOC 

Appendix E.  Resolved issues (to be removed by RFC Editor before publication)

Issues that were either rejected or resolved in this version of this document.



 TOC 

E.1.  quoted

In Section 3.1:

Type: change

julian.reschke@greenbytes.de (2010-08-23): Can value be quoted-pair as well? It is "value" only in RFC 2183, but "quoted-string" only in 2616. UAs seem to handle quoted-strings, although some have trouble unescaping backslashes.

julian.reschke@greenbytes.de (2010-08-24): Actually, "value" is "token" or "quoted-string", both in RFC 2616 and RFC 2183 (by reference to RFC 2045). The only problem is that RFC 2616 uses quoted-string instead of value in the definition for the filename parameter. This is a bug in 2616.

Resolution (2010-08-24): Note the change in "Changes from the RFC 2616 Definition".



 TOC 

E.2.  asciivsiso

In Section 3.3:

Type: change

julian.reschke@greenbytes.de (2010-08-24): We should be consistent about what RFC 2616 defaults to (ASCII vs ISO-8859-1).

Resolution (2010-08-30): Say "ISO-8859-1", and also make the ISO-8859-1 ref normative.



 TOC 

E.3.  deplboth

In Section 4:

Type: change

julian.reschke@greenbytes.de (2010-08-24): Add an example that uses both "filename" and "filename*" and mention current UA behavior.

Resolution (2010-08-27): Add the example, and mention the issues with it.



 TOC 

E.4.  registry

In Section 7.1:

Type: change

julian.reschke@greenbytes.de (2010-08-23): The registry technically is for the MIME header, but has been used for C-D in other protocols already. What's missing are instructions that new registrations should state which protocol they're for. Do we want to attempt to modify the registry?

Resolution (2010-08-30): Add a section about extensibility explaining the existing registries.



 TOC 

E.5.  docfallback

In Section C.4:

Type: edit

julian.reschke@greenbytes.de (2010-08-30): Describe the implementation quality of the fallback behavior.

Resolution (2010-08-30): Done.



 TOC 

Appendix F.  Open issues (to be removed by RFC Editor prior to publication)



 TOC 

F.1.  edit

Type: edit

julian.reschke@greenbytes.de (2009-10-16): Umbrella issue for editorial fixes/enhancements.



 TOC 

Index

C 
 Content-Disposition header
H 
 Headers
   Content-Disposition


 TOC 

Author's Address

  Julian F. Reschke
  greenbytes GmbH
  Hafenweg 16
  Muenster, NW 48155
  Germany
EMail:  julian.reschke@greenbytes.de
URI:  http://greenbytes.de/tech/webdav/