On loading MUD URLs from QR codes
Sandelman Software Works
mcr+ietf@sandelman.ca
CIRA Labs
Jacques.Latour@cira.ca
UNSW Sydney
h.habibi@unsw.edu.au
Internet
Internet-Draft
This informational document details a protocol to load MUD definitions
for devices which have no integrated MUD (RFC8520) support.
This document is published to inform the Internet community of this mechanism to allow
interoperability and to serve as a basis of other standards work if there is interest.
RFCEDITOR please remove: Pull requests and edit welcome at:
Introduction
The Manufacturer Usage Description (MUD) defines a YANG data model to express what sort of access a device requires to operate correctly.
That document additionally defines three ways for the device to communicate the URL of the resulting JSON format file to a network enforcement point: DHCP, within an X.509 certificate extension, and via LLDP.
Each of the above mechanism conveys the MUD URL in-band, and requires modifications to the device firmware.
Most small IoT devices do not have LLDP, and often have very restricted DHCP clients.
Adding the LLDP or DHCP options requires at least some minimal configuration change, and possibly entire new subsystems.
Meanwhile, use of the PKIX certification extension only makes sense as part of a larger IDevID based deployment such as .
In the above cases these mechanisms can only be implemented by persons with access to modify and update the firmware of the device.
In the meantime there is a chicken or egg problem (): no manufacturers include MUD URLs in their products as there are no gateways that use them.
No gateways include code that processes MUD URLs as no products produce them.
The protocol described here allows any person with physical access to the device to affix a reference to a MUD URL that can later be scanned by an end user.
Such an action can be done by
- the marketing department of the Manufacturer,
- an outsourced assembler plant,
- value added resellers (perhaps in response to a local RFP),
- a company importing the product (possibly to comply with a local regulation),
- a network administrator (perhaps before sending devices home with employees, or to remote sites),
- a retailer as a value added service.
QRcodes are informally described in and formally defined in .
The protocol described in this document uses a QRcode to encode the MUD URL. Specifically, the protocol leverages the data format from the Reverse Logistics Association's Standardized Quick Response for Logistics .
SQRL codes are being put on devices via sticker or via laser etching into the case in order to deal with many situations, but specifically for end-of-life processing for the device.
An important idea behind the effort is that clearly identifying a product permits appropriate disposal, refurbishment or recycling of the components of the product.
There are also use cases for SQRL described in which the codes are used as part of regular maintenance for a product.
SQRL is an application of the 12N Data Identifier system specified by the ANSI MH10.8.2 Committee in a format appropriate for QRcodes as well as other things like NFCs transmissions.
QRcode generators are available as web services ,
or as programs such as .
summarizes the considerations contained in section 6.1 ("Updating MUD URLs vs Updating MUD files").
Due to the immutable nature of the QRcode, MUD URLs in this document will need to
non-firmware specific.
Terminology
Although this document is not an IETF Standards Track publication it
adopts the conventions for normative language to provide clarity of
instructions to the implementer.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL
NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED",
"MAY", and "OPTIONAL" in this document are to be interpreted as
described in BCP 14 when, and only when, they
appear in all capitals, as shown here.
Protocol
This QRcode protocol builds upon the work by .
That protocol is very briefly described in the next section.
Then the list of needed Data Records to be filled in is explained.
The SQRL Protocol
documents an octet protocol that can be efficiently encoded into QRcodes using a sequence of ASCII bytes, plus six control codes (see section 3.1 of ):
- <RS> Record Separator (ASCII 30)
- <EoT> End of Transmission (ASCII 4)
- <FS> Field Separator (ASCII 28)
- <GS> Group Separator (ASCII 29)
- <US> Unit Separator (ASCII 31),
- Concatenation Operator (ASCII 43: "+").
Section 7.2 of gives the details, which can be summarized as:
- The QR code header starts with:
" "06" "12N"
]]>
- Include one or more Data Records. This consists of a four letter Field Identifiers followed by ASCII characters terminated with a <Unit Separator>.
- End with:
]]>
There are additionally optional flags that may be present in every Data Record as described in section 7.4 of .
These flags have no bearing on MUD processing.
A parser which is only collecting MUD URLs will not need to parse those flags.
A general purpose SQRL parser will need more complexity.
Field Seperator characters are used in SQRL to signify the beginning of a new unit of data.
A MUD specific parser that encounters a Field Seperator and has not yet collected the right MUD information MUST ignore the characters collected so far and then restart.
Environment records, as described in section 7.4, look and act exactly as fields, with a special Field Identifier.
They serve no purpose when looking for MUD information, and MAY be ignored.
Manufacturer Usage Descriptions in SQRL
B000 Company Name
The B000 Data Record is mandatory in .
It MUST be in ASCII representation.
It should be a representation of the company or brand name.
It SHOULD match the ietf-mud/mud/mfg-name in the MUD file, however the MUD file can contain arbitrary UTF8 for this name, while the SQRL files are expected to be 7-bit US-ASCII.
B001 Product Name
The B001 Data Record is optional in .
It's presence is RECOMMENDED.
Some third parties that create QRcode stickers might not know the product name with 100% certainty, and MAY prefer to omit this rather than create further confusion.
It is the Product Name in ASCII.
B002 Model Number
The B002 Data Record is optional in , but is MANDATORY in this profile.
It is the Model Name in ASCII.
It SHOULD match the optional ietf-mud/mud/model-name in the MUD file if that entry is present in the MUD file.
If a third party that is creating QRcodes can not locate an official model number when creating their MUD file and QRcode, then the third party SHOULD make one up.
MUD URL Data Record
A new Field Identifier has been assigned by the Reverse Logistics Association (RLA), which is "M180"
This record MUST be filled with the MUD URL.
Short URLs are easier to encode into QRcode because they require fewer pixels of
QRcode.
More content in the QRcode requires a bigger image.
Use of URL shortening services (see ) can be useful provided that the service is stable throughout the lifetime of the device and QRcode, and that the privacy stance of the service is well understood.
Section 8.1 of also has some good advice on longevity concerns with URLs.
The URL provided MUST NOT have a query (?) portion present.
If one is present, the query portion MUST be removed before processing.
MUD Device MAC Address
In order for the MUD controller to associate the above policy with a specific device,
some unique identifier must be provided to the MUD controller.
The most actionable identifier is the Ethernet MAC address.
section 9.10 defines the Data Record: "M06C" as the MAC address.
No format for the MAC address is provided in that document.
This document RECOMMENDS 12 (or 16) hex octets are used with no spaces or punctuation.
(16 octets are used in the IEEE OUI-64 format used in 802.15.4, and some next generation Ethernet proposals)
Parsers that find punctuation (such as colons (":"), dashes ("-"), or white space) MUST
skip over it.
Generic URL or Version Specific URL
MUD URLs which are communicated in-band by the device, and which are programmed into the device's firmware may provide a firmware specific version of the MUD URL.
This has the advantage that the resulting Access Control Lists (ACLs) implemented are specific to the needs of that version of the firmware.
A MUD URL which is affixed to the device with a sticker, or etched into the case can not be changed.
Given the considerations of section 6.1 ("Updating MUD URLs vs Updating MUD files"), it is prudent to use a MUD URL which points to a MUD file which will only have new features added over time, and never have features removed.
When the firmware eventually receives built-in MUD URL support, then a more specific URL may be used.
Note that in many cases it will be third parties who are generating these QRcodes, so the MUD file may be hosted by the third party.
Crowd Supply of MUD Files
At the time of writing, the IETF MUD is a new IETF Proposed Standard.
Hence, IoT device manufacturers have not yet provided MUD profiles for their devices.
A research group at the University of New South Wales (UNSW Sydney) has developed an open-source tool, called MUDgee (), which automatically generates a MUD file (profile) for an IoT device from its traffic trace in order to make this process faster, easier, and more accurate.
Note that the generated profile completeness solely depends on the completeness of the input traffic traces.
MUDgee assumes that all the activity seen is intended and benign.
UNSW researchers have applied MUDgee about 30 consumer IoT devices from their lab testbed, and publicly released their MUD files ().
MUDgee can assist IoT manufacturers in developing and verifying MUD profiles, while also helping adopters of these devices to ensure they are compatible with their organisational policies.
Similar processes have been done in a number of other public and private labs.
One of the strong motivations for this specification is to allow for this work to leave the lab, to be applied in the field.
Privacy Considerations
The presence of the MUD URL in the QR code reveals the manufacturer of the device, the type or model of the device, and possibly the firmware version of the device.
The MAC address of the device will also need to be present, and this is potentially Personally Identifiable Information (PII).
Such QRcodes should not be placed on the outside of the packaging, and only on the device itself, ideally on a non-prominent part of the device. (e.g., the bottom).
The QR code sticker should not placed on any part of the device that might become visible to machine vision systems in the same area.
This includes security systems, robotic vacuum cleaners, anyone taking a picture with a camera.
Such systems may store the picture(s) in such a way that a future viewer of the image will be able to decode the QR code, possibly through assembly of multiple pictures.
Of course, the QR code is not, however, a certain indicator that the device is present, only that the QR code sticker that came with the device is present.
Security Considerations
The mere presence of at QRcode on a device does not in itself create any security issues on its own.
Neither an attached paper sticker or a laser etched code in a plastic case will not affect the device operation.
The QRcode is not active, it is not in general able to communicate on nearby networks.
It is conceivable that something more active is concealed in the sticker: an NFC or RFID tag for instance.
But, any sticker could contain such a thing: on some university campuses stickers are often used as part of political campaigns, and can be found attached all over the place.
Security issues that this protocol create are related to assumptions that the presence of the QRcode might imply.
The presence of the QRcode may imply to some owners or network operators that the behaviour of the device has been vetted by some authority.
It is here that some caution is required.
The network operator who takes the MUD file designated by the QRcode needs to be careful that they are validating the signature on the MUD file.
Not only that the file is intact, but that the signer of the file is authorized to sign MUD files for that vendor, or that the network operator has some trust if the MUD file is a crowd sourced definition.
At the time of writing, does not define any infrastructure to authenticate or authorize MUD file signers.
A possibly bigger risk from application of MUD file stickers to devices is that they may begin to convey a sense of safety to users of the device.
The presence of the sticker, possibly with the logo of the physical establishment in which the device is located could convey to occupants of the establishment that this device is an official device.
For instance, a university which only deploys sensors on the university campus that have been vetted for compliance against a MUD definition.
The risk is then of social engineering: any device with a reasonable looking QRcode may become a trusted device.
An attacker that wishes to infiltrate their own devices need only suitably camoflage the device with an appropriate sticker in order to convey legitimacy.
Another issue with the stickers is that the wrong sticker could be applied to a device by a reseller or other trusted party, either in error, or via some physical or socially engineered attack against that party.
The network operator now onboards a device, and applies what they think is a legitimate network policy for the device in their hands, only it is in fact a policy for another kind of device.
Inclusion of the device specific MAC address (described in ) in the QRcode makes use of the MUD code much easier as it identifies the device specifically.
If the MAC addresss is not included, then a network operator, having the device in their hands, then has to associate the policy with the device through some other interface.
Despite the significant advantage of having the MAC address include, it is unlikely that third party stickers will include that.
Including the MAC address requires that the QRcode for that device requires that a unique sticker be created for each device.
This is possible if the sticker is applied by a manufacturer: it is already common to have a serial number and MAC address on the outside of the device.
In that case, if the QRcode is part of that sticker, then the customization problem is not that complex.
For cases where a third party has produced the QRcode, it is likely that every device of a particular model will have the same QRcode applied, omitting the MAC address.
This makes it more likely that a policy will be applied to the wrong device.
IANA Considerations
This document makes no request for IANA actions.
Acknowledgements
This work was supported by the Canadian Internet Registration Authority (cira.ca).
References
Normative References
Key words for use in RFCs to Indicate Requirement Levels
In many standards track documents several words are used to signify the requirements in the specification. These words are often capitalized. This document defines these words as they should be interpreted in IETF documents. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements.
Manufacturer Usage Description Specification
This memo specifies a component-based architecture for Manufacturer Usage Descriptions (MUDs). The goal of MUD is to provide a means for end devices to signal to the network what sort of access and network functionality they require to properly function. The initial focus is on access control. Later work can delve into other aspects.
This memo specifies two YANG modules, IPv4 and IPv6 DHCP options, a Link Layer Discovery Protocol (LLDP) TLV, a URL, an X.509 certificate extension, and a means to sign and verify the descriptions.
SQRL Codes: Standardized Quick Response for Logistics, Using the 12N Data Identifier
Reverse Logistics Association
QR Code
Wikipedia
Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words
RFC 2119 specifies common key words that may be used in protocol specifications. This document aims to reduce the ambiguity by clarifying that only UPPERCASE usage of the key words have the defined special meanings.
Informative References
The JavaScript Object Notation (JSON) Data Interchange Format
JavaScript Object Notation (JSON) is a lightweight, text-based, language-independent data interchange format. It was derived from the ECMAScript Programming Language Standard. JSON defines a small set of formatting rules for the portable representation of structured data.
This document removes inconsistencies with other specifications of JSON, repairs specification errors, and offers experience-based interoperability guidance.
Bootstrapping Remote Secure Key Infrastructures (BRSKI)
Cisco
Sandelman Software Works
Futurewei Technologies Inc. USA
Watsen Networks
This document specifies automated bootstrapping of an Autonomic
Control Plane. To do this a Secure Key Infrastructure is
bootstrapped. This is done using manufacturer-installed X.509
certificates, in combination with a manufacturer's authorizing
service, both online and offline. We call this process the
Bootstrapping Remote Secure Key Infrastructure (BRSKI) protocol.
Bootstrapping a new device can occur using a routable address and a
cloud service, or using only link-local connectivity, or on limited/
disconnected networks. Support for deployment models with less
stringent security requirements is included. Bootstrapping is
complete when the cryptographic identity of the new key
infrastructure is successfully deployed to the device. The
established secure connection can be used to deploy a locally issued
certificate to the device as well.
Authorized update to MUD URLs
Sandelman Software Works
Huawei Technologies
Cisco Systems
This document provides a way for an RFC8520 Manufacturer Usage
Description (MUD) definitions to declare what are acceptable
replacement MUD URLs for a device.
RFCEDITOR-please-remove: this document is being worked on at:
https://github.com/mcr/iot-mud-acceptable-urls
IEEE 802.1AR Secure Device Identifier
IEEE Standard
Chicken or the egg
Wikipedia
QR Code Generators
Internet
QR encode
ANSI MH10.8.2 Committee
MUDgee
MUD Profiles
Information technology - Automatic identification and data capture techniques - QR Code bar code symbology specification (ISO/IEC 18004)
ISO/IEC
URL shortening
Wikipedia