Internet-Draft draft-ietf-head-rift-kv-registry February 2021
Head & Przygienda Expires 26 August 2021 [Page]
Workgroup:
Network Working Group
Internet-Draft:
draft-rift-head-kv-registry-00
Published:
Intended Status:
Standards Track
Expires:
Authors:
J. Head
Juniper Networks
A. Przygienda
Juniper Networks

RIFT Keys Structure and Well-Known Registry in Key Value TIE

Abstract

Routing in Fat-Trees RIFT [RIFT] allows for key/value pairs to be advertised within Key-Value Topology Information Elements (KV TIEs). The data contained within these KV TIEs can be used for any imaginable purpose. This document defines the various Key Types (i.e. Well-Known, OUI, and Experimental) and a method to structure corresponding values.

Requirements Language

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119].

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 26 August 2021.

Table of Contents

1. Description

Routing in Fat-Trees (RIFT [RIFT]) allows for key/value pairs to be advertised within Key-Value Topology Information Elements (KV TIEs). There are no restrictions placed on the type of data that is contained in KV TIEs nor what the data is used for. It could contain a simple string or even Thrift encoded data. However, the KV elements SHOULD NOT be used to carry topology information used by RIFT itself to perform distributed computations.

This document defines a Key Type Registry to maintain Well-Known and vendor specific Key Types in order to simplify interoperability between implementations and eliminate the risk of collision for future implementations. An Experimental Key Type is additionally defined.

2. Key-Value Pair Structure

Figure 1 illustrates the generic Key-Value Pair structure.


 0                   1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|   Key-Type    |                Key Identifier                 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                      Values (variable)                        |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Figure 1: Generic Key-Value Structure

where:

2.1. Well-Known Key Type

This section reserves a value in the Key Type Registry to indicate Well-Known Key Types that all implementations SHOULD support.

As shown in Figure 2, the Key-Type will be used to identify that the Key Type is Well-Known. The Key Identifier will be used to identify the specific Key and describe the structure of the contained values.


 0                   1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|      TBD2     |        Well-Known Key Identifier              |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                 Well-Known Values (variable)                  |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Figure 2: Well-Known Key Type

2.2. OUI Key Type

This section reserves a value in the Key Type Registry to indicate an OUI (vendor-specific) Key Type that any implementation MAY support.

As shown in Figure 3, the Key-Type will be used to identify the Key Type as OUI. The Key Identifier MUST use an organization's reserved OUI space to indicate the Key and value structure.


 0                   1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|      TBD3     |       Organizationally Unique Identifier      |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|               Vendor Specific Values (variable)               |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Figure 3: OUI Key Type

2.3. Experimental Key Type

This section reserves a value in the Key Type Registry to indicate an Experimental Key Type.

As shown in Figure 4, the Key-Type will be used to identify the Key Type as Experimental. The Key Identifier will be used to identify the specific experimental Key and describe the structure of the contained values.


 0                   1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|      TBD1     |          Experimental Key Identifier          |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                 Experimental Values (variable)                |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Figure 4: Experimental Key Type

3. IANA Considerations

This section requests that IANA help govern Key Types via the usual IANA registry procedures as per [RFC8126].

All values not suggested are available for assignment. The allocation of new values MUST be done via "Expert Review" procedures.

3.1. Key Type Registry

This section defines the Key Type Registry that is used to identify a specific Key Type. It also suggests values for Experimental, Well-Known, and OUI Key Types.

The range of valid values is 1 - 255.

0 is an illegal value and MUST NOT be allocated to or used by any implementation. It MUST be ignored on reception.

3.1.1. Requested Entries

Table 1
Key Type Value Description
Experimental TBD1 Indicates that the Key is Experimental.
Well-Known TBD2 Indicates that the Key is Well-Known.
OUI TBD3 Indicates that the Key is OUI.

3.2. Experimental Key Type

This value indicates that a specific key is Experimental.

The range of valid values is 1 - 16777215 (2^24-1).

0 is an illegal value and MUST NOT be allocated to or used by any implementation. It MUST be ignored on reception.

3.2.1. Requested Entries

Table 2
Experimental Key Identifier Description
Illegal 0 Not allowed.

3.3. Well-Known Key Type

This value indicates that a specific key is Well-Known.

The range of valid values is 1 - 16777215 (2^24-1).

0 is an illegal value and MUST not be allocated to or used by any implementation. It MUST be ignored on reception.

3.3.1. Requested Entries

Table 3
Well-Known Key Identifier Description
Illegal 0 Not allowed.
MAC/IP Binding TBD1 To be defined.
FAM Security Roll-Over Key TBD2 To be defined.

3.4. OUI Key Type

This value indicates a specific OUI Key using an organization's reserved OUI space.

The range of valid values is 1 - 16777215 (2^24-1).

0 is an illegal value and MUST NOT be allocated to or used by any implementation. It MUST be ignored on reception.

3.4.1. Requested Entries

Table 4
OUI Key Identifier Description
Illegal 0 Not allowed.

4. Security Considerations

This document introduces no new security concerns to RIFT or other specifications referenced in this document given that the TIEs that carry KV pairs are already extensively secured by the RIFT [RIFT] specification itself.

5. Acknowledgements

To be provided.

6. Normative References

[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/info/rfc2119>.
[RFC8126]
Cotton, M., Leiba, B., and T. Narten, "Guidelines for Writing an IANA Considerations Section in RFCs", , <https://www.rfc-editor.org/info/rfc8126>.
[RIFT]
Przygienda, T., Sharma, A., Thubert, P., Rijsman, B., and D. Afanasiev, "RIFT: Routing in Fat Trees", Work in Progress, draft-ietf-rift-rift-12, .

Authors' Addresses

Jordan Head
Juniper Networks
1137 Innovation Way
Sunnyvale, CA
United States of America
Tony Przygienda
Juniper Networks
1137 Innovation Way
Sunnyvale, CA
United States of America