Network Working Group A. Rundgren Internet-Draft Independent Intended status: Standards Track B. Jordan Expires: July 28, 2019 Symantec Corporation S. Erdtman Spotify AB January 24, 2019 JSON Canonicalization Scheme (JCS) draft-rundgren-json-canonicalization-scheme-03 Abstract Cryptographic operations like hashing and signing requires that the original data does not change during serialization or parsing. By applying the rules defined by the JSON Canonicalization Scheme (JCS), data provided in JSON [RFC8259] format can be exchanged "as is", while still being usable by secure cryptographic operations. JCS achieves this by building on the serialization formats for JSON primitives as defined by ECMAScript [ES6], constraining JSON data to the I-JSON [RFC7493] subset, and through a platform independent property sorting scheme. The intended audiences of this document are JSON tool vendors, as well as designers of JSON based cryptographic solutions. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on July 28, 2019. Rundgren, et al. Expires July 28, 2019 [Page 1] Internet-Draft draft-rundgren-json-canonicalization-scheme January 2019 Copyright Notice Copyright (c) 2019 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. Detailed Operation . . . . . . . . . . . . . . . . . . . . . 4 3.1. Creation of Input Data . . . . . . . . . . . . . . . . . 4 3.2. Generation of Canonical JSON Data . . . . . . . . . . . . 4 3.2.1. Whitespace . . . . . . . . . . . . . . . . . . . . . 4 3.2.2. Serialization of Primitive Data Types . . . . . . . . 4 3.2.2.1. Serialization of Literals . . . . . . . . . . . . 5 3.2.2.2. Serialization of Strings . . . . . . . . . . . . 5 3.2.2.3. Serialization of Numbers . . . . . . . . . . . . 6 3.2.3. Sorting of Object Properties . . . . . . . . . . . . 6 3.2.4. UTF-8 Generation . . . . . . . . . . . . . . . . . . 8 4. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 8 5. Security Considerations . . . . . . . . . . . . . . . . . . . 8 6. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 8 7. References . . . . . . . . . . . . . . . . . . . . . . . . . 9 7.1. Normative References . . . . . . . . . . . . . . . . . . 9 7.2. Informal References . . . . . . . . . . . . . . . . . . . 9 7.3. URIs . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Appendix A. ES6 Sample Canonicalizer . . . . . . . . . . . . . . 11 Appendix B. Number Serialization Samples . . . . . . . . . . . . 12 Appendix C. Canonicalized JSON as "Wire Format" . . . . . . . . 13 Appendix D. Dealing with Big Numbers . . . . . . . . . . . . . . 14 Appendix E. Implementation Guidelines . . . . . . . . . . . . . 15 Appendix F. Open Source Implementations . . . . . . . . . . . . 16 Appendix G. Other JSON Canonicalization Efforts . . . . . . . . 17 Appendix H. Development Portal . . . . . . . . . . . . . . . . . 17 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 17 Rundgren, et al. Expires July 28, 2019 [Page 2] Internet-Draft draft-rundgren-json-canonicalization-scheme January 2019 1. Introduction Cryptographic operations like hashing and signing requires that the original data does not change during serialization or parsing. One way of accomplishing this is converting the data into a format that has a simple and fixed representation like Base64Url [RFC4648], which is how JWS [RFC7515] addressed this issue. Another solution is to create a canonical version of the data, similar to what was done for the XML Signature [XMLDSIG] standard. The primary advantage with a canonicalizing scheme is that data can be kept in its original form. This is the core rationale behind JCS. Put another way: by using canonicalization a JSON Object may remain a JSON Object even after being signed which simplifies system design, documentation and logging. To avoid "reinventing the wheel", JCS relies on serialization of JSON primitives compatible with ECMAScript (aka JavaScript) beginning with version 6 [ES6], hereafter referred to as "ES6". Seasoned XML developers recalling difficulties getting signatures to validate (usually due to different interpretations of the quite intricate XML canonicalization rules as well as of the equally extensive Web Services security standards), may rightfully wonder why JCS would not suffer from similar issues. The reasons are twofold: o The absence of a namespace concept and default values, as well as constraining data to the I-JSON subset eliminate the need for specific parsing schemes for dealing with canonicalization. o JCS compatible serialization of JSON primitives is supported by most current Web browsers and as well as by Node.js [NODEJS], while the full JCS specification is supported by multiple Open Source implementations (see Appendix F). See also Appendix E. In summary, the JCS specification describes how serialization of JSON primitives compliant with ES6, combined with an elementary property sorting scheme, can be used for supporting "Crypto Safe" JSON. JCS is compatible with some existing systems relying on JSON canonicalization such as JWK Thumbprint [RFC7638] and Keybase [KEYBASE]. 2. Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP Rundgren, et al. Expires July 28, 2019 [Page 3] Internet-Draft draft-rundgren-json-canonicalization-scheme January 2019 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 3. Detailed Operation This section describes the different issues related to creating a canonical JSON representation, and how they are addressed by JCS. 3.1. Creation of Input Data In order to serialize JSON data, one needs data that is adapted for JSON serialization. This is usually achieved by: o Parsing previously generated JSON data. o Programmatically creating data. Irrespective of the method used, the data to be serialized MUST be compatible both with ES6 and I-JSON [RFC7493], which implies the following: o There MUST NOT be any duplicate property names within an element to be serialized as a JSON Object. o String data MUST be expressible as Unicode [UNICODE]. For more information see Section 3.2.2.2. o Numeric data MUST be expressible as IEEE-754 [IEEE754] double precision values. For more information see Section 3.2.2.3. 3.2. Generation of Canonical JSON Data The following subsections describe the steps required for creating a canonical JSON representation of the data elaborated on in the previous section. Appendix A shows sample code for an ES6 based canonicalizer, matching the JCS specification. 3.2.1. Whitespace Whitespace between JSON elements MUST NOT be emitted. 3.2.2. Serialization of Primitive Data Types Assume that you parse a JSON object like the following: Rundgren, et al. Expires July 28, 2019 [Page 4] Internet-Draft draft-rundgren-json-canonicalization-scheme January 2019 { "numbers": [333333333.33333329, 1E30, 4.50, 2e-3, 0.000000000000000000000000001], "string": "\u20ac$\u000F\u000aA'\u0042\u0022\u005c\\\"\/", "literals": [null, true, false] } If you subsequently serialize the parsed data using a serializer compliant with ES6's "JSON.stringify()", the result would (with a line wrap added for display purposes only), be rather divergent with respect to representation of data: {"numbers":[333333333.3333333,1e+30,4.5,0.002,1e-27],"string": "\u20ac$\u000f\nA'B\"\\\\\"/","literals":[null,true,false]} Note: \u20ac denotes the Euro character, which not being ASCII, is currently not displayable in RFCs. The reason for the difference between the parsed data and its serialized counterpart, is due to a wide tolerance on input data (as defined by JSON [RFC8259]), while output data (as defined by ES6), has a fixed representation. As can be seen by the example, numbers are subject to rounding as well. The following subsections describe serialization of primitive JSON data types according to JCS. This part is identical to that of ES6. 3.2.2.1. Serialization of Literals The JSON literals "null", "true", and "false" present no challenge since they already have a fixed definition in JSON [RFC8259]. 3.2.2.2. Serialization of Strings For JSON String data (which includes JSON Object property names as well), each character MUST be serialized as described below (also matching Section 24.3.2.2 of [ES6]): o If the Unicode value falls within the traditional ASCII control character range (U+0000 through U+001F), it MUST be serialized using lowercase hexadecimal Unicode notation (\uhhhh) unless it is in the set of predefined JSON control characters U+0008, U+0009, U+000A, U+000C or U+000D which MUST be serialized as \b, \t, \n, \f and \r respectively. o If the Unicode value is outside of the ASCII control character range, it MUST be serialized "as is" unless it is equivalent to Rundgren, et al. Expires July 28, 2019 [Page 5] Internet-Draft draft-rundgren-json-canonicalization-scheme January 2019 U+005C (\) or U+0022 (") which MUST be serialized as \\ and \" respectively. Finally, the serialized string value MUST be enclosed in double quotes ("). Note: some JSON systems permit the use of invalid Unicode data like "lone surrogates" (e.g. U+DEAD), which also is dealt with in a platform specific way. Since this leads to interoperability issues including broken signatures, such usages MUST be avoided. Note: although the Unicode standard offers a possibility combining certain characters into one, referred to as "Unicode Normalization" (https://www.unicode.org/reports/tr15/ [1]), such functionality MUST be delegated to the application layer. 3.2.2.3. Serialization of Numbers JSON data of type Number MUST be serialized according to Section 7.1.12.1 of [ES6] including the "Note 2" enhancement. Due to the relative complexity of this part, the algorithm itself is not included in this document. However, the specification is fully implemented by for example Google's V8 [V8]. The open source Java implementation mentioned in Appendix F uses a recently developed number serialization algorithm called Ryu [RYU]. ES6 builds on the IEEE-754 [IEEE754] double precision standard for representing JSON Number data. Appendix B holds a set of IEEE-754 sample values and their corresponding JSON serialization. Occasionally applications need higher precision or longer integers than offered by IEEE-754 double precision. Appendix D outlines how this can be achieved in a portable and extensible way. 3.2.3. Sorting of Object Properties Although the previous step indeed normalized the representation of primitive JSON data types, the result would not qualify as "canonical" since JSON Object properties are not in lexicographic (alphabetical) order. Applied to the sample in Section 3.2.2, a properly canonicalized version should (with a line wrap added for display purposes only), read as: {"literals":[null,true,false],"numbers":[333333333.3333333, 1e+30,4.5,0.002,1e-27],"string":"\u20ac$\u000f\nA'B\"\\\\\"/"} Rundgren, et al. Expires July 28, 2019 [Page 6] Internet-Draft draft-rundgren-json-canonicalization-scheme January 2019 Note: \u20ac denotes the Euro character, which not being ASCII, is currently not displayable in RFCs. The rules for lexicographic sorting of JSON Object properties according to JCS are as follows: o JSON Object properties MUST be sorted in a recursive manner which means that possible JSON child Objects MUST have their properties sorted as well. o JSON Array data MUST also be scanned for presence of JSON Objects (and applying associated property sorting), but array element order MUST NOT be changed. When a JSON Object is about to have its properties sorted, the following measures MUST be adhered to: o The sorting process is applied to property strings in their "raw" (unescaped) form. That is, a newline character is treated as U+000A. o Property strings to be sorted are formatted as arrays of UTF-16 [UNICODE] code units. The sorting is based on pure value comparisons, where code units are treated as unsigned integers, independent of locale settings. o Property strings either have different values at some index that is a valid index for both strings, or their lengths are different, or both. If they have different values at one or more index positions, let k be the smallest such index; then the string whose value at position k has the smaller value, as determined by using the < operator, lexicographically precedes the other string. If there is no index position at which they differ, then the shorter string lexicographically precedes the longer string. In plain english this means that property names are sorted in ascending order like the following: "" "a" "aa" "ab" The rationale for basing the sort algorithm on UTF-16 code units is that it maps directly to the string type in ECMAScript, Java and .NET. Systems using another internal representation of string data will need to convert JSON property strings into arrays of UTF-16 code Rundgren, et al. Expires July 28, 2019 [Page 7] Internet-Draft draft-rundgren-json-canonicalization-scheme January 2019 units before sorting. The conversion from UTF-8 or UTF-32 to UTF-16 is defined by the Unicode [UNICODE] standard. Note: for the purpose of obtaining a deterministic property order, sorting on UTF-8 or UTF-32 encoded data would also work, but the result would differ (and thus be incompatible with this specification). 3.2.4. UTF-8 Generation Finally, in order to create a platform independent representation, the resulting JSON string data MUST be encoded in UTF-8. Applied to the sample in Section 3.2.3 this should yield the following bytes here shown in hexadecimal notation: 7b 22 6c 69 74 65 72 61 6c 73 22 3a 5b 6e 75 6c 6c 2c 74 72 75 65 2c 66 61 6c 73 65 5d 2c 22 6e 75 6d 62 65 72 73 22 3a 5b 33 33 33 33 33 33 33 33 33 2e 33 33 33 33 33 33 33 2c 31 65 2b 33 30 2c 34 2e 35 2c 30 2e 30 30 32 2c 31 65 2d 32 37 5d 2c 22 73 74 72 69 6e 67 22 3a 22 e2 82 ac 24 5c 75 30 30 30 66 5c 6e 41 27 42 5c 22 5c 5c 5c 5c 5c 22 2f 22 7d This data is intended to be usable as input to cryptographic methods as well as for value comparisons of JSON objects. For other uses see Appendix C. 4. IANA Considerations This document has no IANA actions. 5. Security Considerations It is vital performing "sanity" checks on input data to avoid overflowing buffers and similar things that could affect the integrity of the system. 6. Acknowledgements Building on ES6 Number serialization was originally proposed by James Manger. This ultimately led to the adoption of the entire ES6 serialization scheme for JSON primitives. Other people who have contributed with valuable input to this specification include Bron Gondwana, John-Mark Gurney, Mike Jones, Mike Miller, Mike Samuel, Michal Wadas, Richard Gibson, Robert Tupelo-Schneck and Scott Ananian. Rundgren, et al. Expires July 28, 2019 [Page 8] Internet-Draft draft-rundgren-json-canonicalization-scheme January 2019 7. References 7.1. Normative References [ES6] Ecma International, "ECMAScript 2015 Language Specification", . [IEEE754] IEEE, "IEEE Standard for Floating-Point Arithmetic", August 2008, . [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC7493] Bray, T., Ed., "The I-JSON Message Format", RFC 7493, DOI 10.17487/RFC7493, March 2015, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data Interchange Format", STD 90, RFC 8259, DOI 10.17487/RFC8259, December 2017, . [UNICODE] The Unicode Consortium, "The Unicode Standard, Version 10.0.0", . 7.2. Informal References [KEYBASE] "Keybase", . [NODEJS] "Node.js", . [OPENAPI] "The OpenAPI Initiative", . [RFC4648] Josefsson, S., "The Base16, Base32, and Base64 Data Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006, . Rundgren, et al. Expires July 28, 2019 [Page 9] Internet-Draft draft-rundgren-json-canonicalization-scheme January 2019 [RFC7515] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, May 2015, . [RFC7638] Jones, M. and N. Sakimura, "JSON Web Key (JWK) Thumbprint", RFC 7638, DOI 10.17487/RFC7638, September 2015, . [RYU] Ulf Adams, "Ryu floating point number serializing algorithm", . [V8] Google LLC, "Chrome V8 Open Source JavaScript Engine", . [XMLDSIG] W3C, "XML Signature Syntax and Processing Version 1.1", . 7.3. URIs [1] https://www.unicode.org/reports/tr15/ [2] https://www.npmjs.com/package/canonicalize [3] https://github.com/erdtman/java-json-canonicalization [4] https://github.com/cyberphone/json-canonicalization/tree/master/ go [5] https://github.com/cyberphone/json-canonicalization/tree/master/ dotnet [6] https://github.com/cyberphone/json-canonicalization/tree/master/ python3 [7] https://tools.ietf.org/html/draft-staykov-hu-json-canonical- form-00 [8] https://gibson042.github.io/canonicaljson-spec/ [9] http://wiki.laptop.org/go/Canonical_JSON [10] https://github.com/cyberphone/ietf-json-canon [11] https://cyberphone.github.io/ietf-json-canon [12] https://github.com/cyberphone/json-canonicalization Rundgren, et al. Expires July 28, 2019 [Page 10] Internet-Draft draft-rundgren-json-canonicalization-scheme January 2019 Appendix A. ES6 Sample Canonicalizer Below is a functionally complete example of a JCS compliant canonicalizer for usage with ES6 based systems. Note: the primary purpose of this code is highlighting the canonicalization algorithm. Using the full power of ES6 would reduce the code size considerably but would also be more difficult to follow by non-experts. var canonicalize = function(object) { var buffer = ''; serialize(object); return buffer; function serialize(object) { if (object === null || typeof object !== 'object') { ///////////////////////////////////////////////// // Primitive data type - Use ES6/JSON // ///////////////////////////////////////////////// buffer += JSON.stringify(object); } else if (Array.isArray(object)) { ///////////////////////////////////////////////// // Array - Maintain element order // ///////////////////////////////////////////////// buffer += '['; let next = false; object.forEach((element) => { if (next) { buffer += ','; } next = true; ///////////////////////////////////////// // Array element - Recursive expansion // ///////////////////////////////////////// serialize(element); }); buffer += ']'; } else { ///////////////////////////////////////////////// // Object - Sort properties before serializing // ///////////////////////////////////////////////// buffer += '{'; let next = false; Object.keys(object).sort().forEach((property) => { Rundgren, et al. Expires July 28, 2019 [Page 11] Internet-Draft draft-rundgren-json-canonicalization-scheme January 2019 if (next) { buffer += ','; } next = true; /////////////////////////////////////////////// // Property names are strings - Use ES6/JSON // /////////////////////////////////////////////// buffer += JSON.stringify(property); buffer += ':'; ////////////////////////////////////////// // Property value - Recursive expansion // ////////////////////////////////////////// serialize(object[property]); }); buffer += '}'; } } }; Appendix B. Number Serialization Samples The following table holds a set of ES6 compatible Number serialization samples, including some edge cases. The column "IEEE- 754" refers to the internal ES6 representation of the Number data type which is based on the IEEE-754 [IEEE754] standard using 64-bit (double precision) values, here expressed in hexadecimal. |====================================================================| | IEEE-754 | JSON Representation | Comment | |====================================================================| | 0000000000000000 | 0 | Zero | |--------------------------------------------------------------------| | 8000000000000000 | 0 | Minus zero | |--------------------------------------------------------------------| | 0000000000000001 | 5e-324 | Smallest pos number | |--------------------------------------------------------------------| | 8000000000000001 | -5e-324 | Smallest neg number | |--------------------------------------------------------------------| | 7fefffffffffffff | 1.7976931348623157e+308 | Largest pos number | |--------------------------------------------------------------------| | ffefffffffffffff | -1.7976931348623157e+308 | Largest neg number | |--------------------------------------------------------------------| | 4340000000000000 | 9007199254740992 | Largest pos integer | |--------------------------------------------------------------------| | c340000000000000 | -9007199254740992 | Largest neg integer | |--------------------------------------------------------------------| | 7fffffffffffffff | | Error (NaN) | |--------------------------------------------------------------------| Rundgren, et al. Expires July 28, 2019 [Page 12] Internet-Draft draft-rundgren-json-canonicalization-scheme January 2019 | 7ff0000000000000 | | Error (Infinity) | |--------------------------------------------------------------------| | 44b52d02c7e14af5 | 9.999999999999997e+22 | | |--------------------------------------------------------------------| | 44b52d02c7e14af6 | 1e+23 | | |--------------------------------------------------------------------| | 44b52d02c7e14af7 | 1.0000000000000001e+23 | | |--------------------------------------------------------------------| | 444b1ae4d6e2ef4e | 999999999999999700000 | | |--------------------------------------------------------------------| | 444b1ae4d6e2ef4f | 999999999999999900000 | | |--------------------------------------------------------------------| | 3eb0c6f7a0b5ed8d | 0.000001 | | |--------------------------------------------------------------------| | 3eb0c6f7a0b5ed8c | 9.999999999999997e-7 | | |--------------------------------------------------------------------| | 41b3de4355555553 | 333333333.3333332 | | |--------------------------------------------------------------------| | 41b3de4355555554 | 333333333.33333325 | | |--------------------------------------------------------------------| | 41b3de4355555555 | 333333333.3333333 | | |--------------------------------------------------------------------| | 41b3de4355555556 | 333333333.3333334 | | |--------------------------------------------------------------------| | 41b3de4355555557 | 333333333.33333343 | | |--------------------------------------------------------------------| | becbf647612f3696 | -0.0000033333333333333333 | | |--------------------------------------------------------------------| Note: for maximum compliance with ECMAScript's "JSON" object, values that are to be interpreted as true integers, SHOULD be in the range -9007199254740991 to 9007199254740991. Note: although a set of specific integers like 2**68 (4430000000000000 in IEEE-754 format) could be regarded as having extended precision, the JCS/ES6 number serialization algorithm does not take this in consideration. Appendix C. Canonicalized JSON as "Wire Format" Since the result from the canonicalization process (see Section 3.2.4), is fully valid JSON, it can also be used as "Wire Format". However, this is just an option since cryptographic schemes based on JCS, in most cases would not depend on that externally supplied JSON data already is canonicalized. In fact, the ES6 standard way of serializing objects using "JSON.stringify()" produces a more "logical" format, where properties Rundgren, et al. Expires July 28, 2019 [Page 13] Internet-Draft draft-rundgren-json-canonicalization-scheme January 2019 are kept in the order they were created or received. The example below shows an address record which could benefit from ES6 standard serialization: { "name": "John Doe", "address": "2000 Sunset Boulevard", "city": "Los Angeles", "zip": "90001", "state": "CA" } Using canonicalization the properties above would be output in the order "address", "city", "name", "state" and "zip", which adds fuzziness to the data from a human (developer or technical support), perspective. That is, for many applications, canonicalization would only be used internally for creating a "hashable" representation of the data needed for cryptographic operations. Note: if message size is not a concern, you may even send "Pretty Printed" JSON data on the wire (since whitespace always is ignored by the canonicalization process). Appendix D. Dealing with Big Numbers There are two major issues associated with the JSON Number type, here illustrated by the following sample object: { "giantNumber": 1.4e+9999, "payMeThis": 26000.33, "int64Max": 9223372036854775807 } Although the sample above conforms to JSON (according to [RFC8259]), there are some practical hurdles to consider: o Standard JSON parsers rarely process "giantNumber" in a meaningful way. 64-bit integers like "int64Max" normally pass through parsers, but in systems like ES6, at the expense of lost precision. o Another issue is that applications would normally use different data types for "giantNumber" and "int64Max". In addition, monetary data like "payMeThis" would presumably not rely on Rundgren, et al. Expires July 28, 2019 [Page 14] Internet-Draft draft-rundgren-json-canonicalization-scheme January 2019 floating point data types due to rounding issues with respect to decimal arithmetic. The established way handling this kind of "overloading" of the JSON Number type (at least in an extensible manner), is through mapping mechanisms, instructing parsers what to do with different properties based on their name. However, this greatly limits the value of using the Number type outside of its original somewhat constrained, JavaScript context. For usage with JCS (and in fact for any usage of JSON by multiple parties potentially using independently developed software), numbers that do not have a natural place in the current JSON ecosystem MUST be wrapped using the JSON String type. This is close to a de-facto standard for open systems. Aided by a mapping system; be it programmatic like var obj = JSON.parse('{"giantNumber": "1.4e+9999"}'); var biggie = new BigNumber(obj.giantNumber); or declarative schemes like OpenAPI [OPENAPI], there are no real limits, not even when using ES6. Appendix E. Implementation Guidelines The optimal solution is integrating support for JCS directly in JSON serializers (parsers need no changes). That is, canonicalization would just be an additional "mode" for a JSON serializer. However, this is currently not the case. Fortunately JCS support can be performed through externally supplied canonicalizer software, enabling signature creation schemes like the following: 1. Create the data to be signed. 2. Serialize the data using existing JSON tools. 3. Let the external canonicalizer process the serialized data and return canonicalized result data. 4. Sign the canonicalized data. 5. Add the resulting signature value to the original JSON data through a designated signature property. 6. Serialize the completed (now signed) JSON object using existing JSON tools. Rundgren, et al. Expires July 28, 2019 [Page 15] Internet-Draft draft-rundgren-json-canonicalization-scheme January 2019 A compatible signature verification scheme would then be as follows: 1. Parse the signed JSON data using existing JSON tools. 2. Read and save the signature value from the designated signature property. 3. Remove the signature property from the parsed JSON object. 4. Serialize the remaining JSON data using existing JSON tools. 5. Let the external canonicalizer process the serialized data and return canonicalized result data. 6. Verify that the canonicalized data matches the saved signature value using the algorithm and key used for creating the signature. A canonicalizer like above is effectively only a "filter", potentially usable with a multitude of quite different cryptographic schemes. Using a JSON serializer with integrated JCS support, the serialization performed before the canonicalization step could be eliminated for both processes. Appendix F. Open Source Implementations The following Open Source implementations have been verified to be compatible with JCS: o JavaScript: https://www.npmjs.com/package/canonicalize [2] o Java: https://github.com/erdtman/java-json-canonicalization [3] o Go: https://github.com/cyberphone/json- canonicalization/tree/master/go [4] o .NET/C#: https://github.com/cyberphone/json- canonicalization/tree/master/dotnet [5] o Python: https://github.com/cyberphone/json- canonicalization/tree/master/python3 [6] Rundgren, et al. Expires July 28, 2019 [Page 16] Internet-Draft draft-rundgren-json-canonicalization-scheme January 2019 Appendix G. Other JSON Canonicalization Efforts There are (and have been) other efforts creating "Canonical JSON". Below is a list of URLs to some of them: o https://tools.ietf.org/html/draft-staykov-hu-json-canonical- form-00 [7] o https://gibson042.github.io/canonicaljson-spec/ [8] o http://wiki.laptop.org/go/Canonical_JSON [9] Appendix H. Development Portal The JCS specification is currently developed at: https://github.com/cyberphone/ietf-json-canon [10]. The most recent "editors' copy" can be found at: https://cyberphone.github.io/ietf-json-canon [11]. JCS source code and test data is available at: https://github.com/cyberphone/json-canonicalization [12] Authors' Addresses Anders Rundgren Independent Montpellier France Email: anders.rundgren.net@gmail.com URI: https://www.linkedin.com/in/andersrundgren/ Bret Jordan Symantec Corporation 350 Ellis Street Mountain View CA 94043 USA Email: bret_jordan@symantec.com Rundgren, et al. Expires July 28, 2019 [Page 17] Internet-Draft draft-rundgren-json-canonicalization-scheme January 2019 Samuel Erdtman Spotify AB Birger Jarlsgatan 61, 4tr Stockholm 113 56 Sweden Email: erdtman@spotify.com Rundgren, et al. Expires July 28, 2019 [Page 18]