Network Working Group H. Song, Ed. Internet-Draft T. Zhou Intended status: Informational ZB. Li Expires: January 3, 2019 Huawei G. Fioccola Telecom Italia ZQ. Li China Mobile P. Martinez-Julia NICT L. Ciavaglia Nokia A. Wang China Telecom July 2, 2018 Toward a Network Telemetry Framework draft-song-ntf-02 Abstract This document suggests the necessity of an architectural framework for network telemetry in order to meet the current and future network operation requirements. The defining characteristics of network telemetry shows a clear distinction from the conventional network OAM concept; hence the network telemetry demands new techniques and protocols. This document clarifies the terminologies and classifies the categories and components of a network telemetry framework. The requirements, challenges, existing solutions, and future directions are discussed for each category. The network telemetry framework and the taxonomy help to set a common ground for the collection of related works and put future technique and standard developments into perspective. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119]. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute Song, et al. Expires January 3, 2019 [Page 1] Internet-Draft Network Telemetry Framework July 2018 working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on January 3, 2019. Copyright Notice Copyright (c) 2018 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Motivation . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1. Use Cases . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2. Challenges . . . . . . . . . . . . . . . . . . . . . . . 5 1.3. Glossary . . . . . . . . . . . . . . . . . . . . . . . . 5 1.4. Network Telemetry . . . . . . . . . . . . . . . . . . . . 6 2. The Necessity of a Network Telemetry Framework . . . . . . . 8 3. Network Telemetry Framework . . . . . . . . . . . . . . . . . 9 3.1. Existing Works Mapped in the Framework . . . . . . . . . 11 3.2. Management Plane Telemetry . . . . . . . . . . . . . . . 12 3.2.1. Requirements and Challenges . . . . . . . . . . . . . 12 3.2.2. Push Extensions for NETCONF . . . . . . . . . . . . . 13 3.2.3. gRPC Network Management Interface . . . . . . . . . . 13 3.3. Control Plane Telemetry . . . . . . . . . . . . . . . . . 14 3.3.1. Requirements and Challenges . . . . . . . . . . . . . 14 3.3.2. BGP Monitoring Protocol . . . . . . . . . . . . . . . 14 3.4. Data Plane Telemetry . . . . . . . . . . . . . . . . . . 15 3.4.1. Requirements and Challenges . . . . . . . . . . . . . 15 3.4.2. Technique Classification . . . . . . . . . . . . . . 16 3.4.3. The IPFPM technology . . . . . . . . . . . . . . . . 16 3.4.4. Dynamic Network Probe . . . . . . . . . . . . . . . . 18 3.4.5. IP Flow Information Export (IPFIX) protocol . . . . . 18 Song, et al. Expires January 3, 2019 [Page 2] Internet-Draft Network Telemetry Framework July 2018 3.4.6. In-Situ OAM . . . . . . . . . . . . . . . . . . . . . 18 3.5. External Data and Event Telemetry . . . . . . . . . . . . 19 3.5.1. Requirements and Challenges . . . . . . . . . . . . . 19 4. Security Considerations . . . . . . . . . . . . . . . . . . . 20 5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 20 6. Contributors . . . . . . . . . . . . . . . . . . . . . . . . 20 7. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 20 8. References . . . . . . . . . . . . . . . . . . . . . . . . . 20 8.1. Normative References . . . . . . . . . . . . . . . . . . 20 8.2. Informative References . . . . . . . . . . . . . . . . . 20 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 23 1. Motivation The advance of AI/ML technologies gives networks an unprecedented opportunity to realize network autonomy with closed control loops. An intent-driven autonomous network is the logical next step for network evolution following SDN, aiming to reduce (or even eliminate) human labor, make the most efficient use of network resources, and provide better services more aligned with customer requirements. Although we still have a long way to reach the ultimate goal, the journey has started nevertheless. The storage and computing technologies are already mature enough to be able to retain and process a huge amount of data and make real- time inference. Tools based on machine learning technologies and big data analytics are powerful in detecting and reacting on network faults, anomalies, and policy violations. In turn, the network policy updates for planning, intrusion prevention, optimization, and self-healing can be applied. Some tools can even predict future events based on historical data. However, the networks fail to keep pace with such data need. The current network architecture, protocol suite, and system design are not ready yet to provide enough quality data. In the remaining of this section, first we identify a few key network operation use cases that network operators need the most. These use cases are also the essential functions of the future autonomous networks. Next, we show why the current network OAM techniques and protocols are not sufficient to meet the requirements of these use cases. The discussion underlines the need of a new brood of techniques and protocols which we put under an umbrella term - network telemetry. 1.1. Use Cases All these use cases involves the data extracted from the network data plane and sometimes from the network control plane and management plane. Song, et al. Expires January 3, 2019 [Page 3] Internet-Draft Network Telemetry Framework July 2018 Intent and Policy Compliance: Network policies are the rules that constraint the services for network access, provide differentiate within a service, or enforce specific treatment on the traffic. For example, a service function chain is a policy that requires the selected flows to pass through a set of network functions in order. An intents is a high-level abstract policy which requires a complex translation and mapping process before being applied on networks. While a policy is enforced, the compliance needs to be verified and monitored continuously. SLA Compliance: A Service-Level Agreement (SLA) defines the level of service a user expects from a network operator, which include the metrics for the service measurement and remedy/penalty procedures when the service level misses the agreement. Users need to check if they get the service as promised and network operators need to evaluate how they can deliver the services that can meet the SLA. Root Cause Analysis: Network failure often involves a sequence of chained events and the source of the failure is not straightforward to identify, especially when the failure is sporadic. While machine learning or other data analytics technologies can be used for root cause analysis, it up to the network to provide all the relevant data for analysis. Load Balancing, Traffic Engineering, and Network Planning: Network operators are motivated to optimize their network utilization for better ROI or lower CAPEX, as well as differentiation across services and/or users of a given service. The first step is to know the real-time network conditions before applying policies to steer the user traffic or adjust the load balancing algorithm. In some cases network micro-bursts need to be detected in a very short time-frame so that fine grained traffic control can be applied to avoid possible network congestion. The long term network capacity planning and topology augmentation also rely on the accumulated data of the network operation. Event Tracking and Prediction: Network visibility is critical for a healthy network operation. Numerous network events are of interest to network operators. For example, Network operators always want to learn where and why packets are dropped for an application flow. They also want to be warned by some early signs that some component is going to fail so the proper fix or replacement can be made in time. Song, et al. Expires January 3, 2019 [Page 4] Internet-Draft Network Telemetry Framework July 2018 1.2. Challenges The conventional OAM techniques, as described in [RFC7276], are not sufficient to support the above use cases for the following reasons: o Most use cases need to continuously monitor the network and dynamically refine the data collection in real-time and interactively. The poll-based low-frequency data collection is ill-suited for these applications. Streaming data directly pushed from the data source is preferred. o Various data is needed from any place ranging from the packet processing engine to the QoS traffic manager. Traditional data plane devices cannot provide the necessary probes. An open and programmable data plane is therefore needed. o Many application scenarios need to correlate data from multiple sources (e.g., from distributed nodes or from different network plane). A piecemeal solution is often lacking the capability to consolidate the data from multiple sources. The composition of a complete solution, as partly proposed by ARCA [I-D.pedro-nmrg-anticipated-adaptation], will be empowered and guided by a comprehensive framework. o The passive measurement techniques can either consume too much network resources and render too much redundant data, or lead to inaccurate results. The active measurement techniques are indirect, and they can interfere with the user traffic. We need techniques that can collect direct and on-demand data from user traffic. 1.3. Glossary Before further discussion, we list some key terminology and acronyms used in this documents. We make an intended distinction between network telemetry and network OAM. AI: Artificial Intelligence. Use machine-learning based technologies to automate network operation. BMP: BGP Monitoring Protocol DNP: Dynamic Network Probe DPI: Deep Packet Inspection gNMI: gPRC Network Management Interface Song, et al. Expires January 3, 2019 [Page 5] Internet-Draft Network Telemetry Framework July 2018 gRPC: gRPC Remote Procedure Call IDN: Intent-Driven Network IPFIX: IP Flow Information Export Protocol IPFPM: IP Flow Performance Measurement IOAM: In-situ OAM NETCONF: Network Configuration Protocol Network Telemetry: A general term for a new brood of network visibility techniques and protocols, with the characteristics defined in this document. Network telemetry enables smooth evolution toward intent-driven autonomous networks. NMS: Network Management System OAM: Operations, Administration, and Maintenance. A group of network management functions that provide network fault indication, fault localization, performance information, and data and diagnosis functions. Most conventional network monitoring techniques and protocols belong to network OAM. SNMP: Simple Network Management Protocol YANG: A data modeling language for NETCONF YANG FSM: A YANG model to define device side finite state machine YANG PUSH: A method to subscribe pushed data from remote YANG datastore 1.4. Network Telemetry For a long time, network operators have relied upon protocols such as SNMP [RFC1157] to monitor the network. SNMP can only provide limited information about the network. Since SNMP is poll-based, it incurs low data rate and high processing overhead. Such drawbacks make SNMP unsuitable for today's automatic network applications. Network telemetry has emerged as a mainstream technical term to refer to the newer techniques of data collection and consumption, distinguishing itself form the convention techniques for network OAM. It is expected that network telemetry can provide the necessary network visibility for autonomous networks, address the shortcomings Song, et al. Expires January 3, 2019 [Page 6] Internet-Draft Network Telemetry Framework July 2018 of conventional OAM techniques, and allow for the emergence of new techniques bearing certain characterisitcs. One key difference between the network telemetry and the network OAM is that the network telemetry assumes an intelligent machine in the center of a closed control loop, while the network OAM assumes the human network operators in the middle of an open control loop. The network telemetry can directly trigger the automated network operation; The conventional OAM tools only help human operators to monitor and diagnose the networks and guide manual network operations. The different assumptions lead to very different techniques. Although the network telemetry techniques are just emerging and subject to continuous evolution, several defining characteristics of network telemetry have been well accepted: o Push and Streaming: Instead of polling data from network devices, the telemetry collector subscribes to the streaming data pushed from the data source in network devices. o Volume and Velocity: The telemetry data is intended to be consumed by machine rather than by human. Therefore, the data volume is huge and the processing is often in realtime. o Normalization and Unification: Telemetry aims to address the overall network automation needs. The piecemeal solutions offered by the conventional OAM approach are no longer suitable. Efforts need to be made to normalize the data representation and unify the protocols. o Model-based: The data is model-based which allows applications to configure and consume data with ease. o Data Fusion: The data for a single application can come from multiple data sources (e.g., cross domain, cross device, and cross layer) and needs to be correlated to take effect. o Dynamic and Interactive: Since the network telemetry means to be used in a closed control loop for network automation, it needs to run continuously and adapt to the dynamic and interactive queries from the network operation controller. In addition, the ideal network telemetry solution should also support the following features: o In-Network Customization: The data can be customized in network at run-time to cater to the specific need of applications. This Song, et al. Expires January 3, 2019 [Page 7] Internet-Draft Network Telemetry Framework July 2018 needs the support of a programmable data plane which allows probes to be deployed at flexible locations. o Direct Data Plane Export: The data originated from data plane can be directly exported to the data consumer for efficiency, especially when the data bandwidth is large and the real-time processing is required. o In-band Data Collection: In addition to the passive and active data collection approaches, the new hybrid approach allows to directly collect data for any target flow on its entire forwarding path. o Non-intrusive: The telemetry system should not fall into the trap of the "observer effect". That is, it should not change the network behavior or affect the forwarding performance. 2. The Necessity of a Network Telemetry Framework Big data analytics and machine-learning based AI technologies are applied for network operation automation, relying on abundant data from networks. The single-sourced and static data acquisition cannot meet the data requirements. It is desirable to have a framework that integrates multiple telemetry approaches from different layers, and allows flexible combinations for different applications. The framework will benefit application development for the following reasons. o The future autonomous networks will require a holistic view on network visibility. All the use cases and applications need to be supported uniformly and coherently under a single intelligent agent. Therefore, the protocols and mechanisms should be consolidated into a minimum yet comprehensive set. A telemetry framework can help to normalize the technique developments. o Network visibility presents multiple viewpoints. For example, the device viewpoint takes the network infrastructure as the monitoring object from which the network topology and device status can be acquired; the traffic viewpoint takes the flows or packets as the monitoring object from which the traffic quality and path can be acquired. An application may need to switch its viewpoint during operation. It may also need to correlate a service and its network experience to acquire the comprehensive information. o Applications require network telemetry to be elastic in order to efficiently use the network resource and reduce the performance impact. Routine network monitoring covers the entire network with Song, et al. Expires January 3, 2019 [Page 8] Internet-Draft Network Telemetry Framework July 2018 low data sampling rate. When issues arise or trends emerge, the telemetry data source can be modified and the data rate can be boosted. o Efficient data fusion is critical for applications to reduce the overall quantity of data and improve the accuracy of analysis. So far, some telemetry related work has been done within IETF. However, this work is fragmented and scattered in different working groups. The lack of coherence makes it difficult to assemble a comprehensive network telemetry system and causes repetitive and redundant work. A formal network telemetry framework is needed for constructing a working system. The framework should cover the concepts and components from the standardization perspective. This document clarifies the layers on which the telemetry is exerted and decomposes the telemetry system into a set of distinct components that the existing and future work can easily map to. 3. Network Telemetry Framework Telemetry can be applied on the data plane, the control plane, and the management plane in a network, as well as other sources out of the network, as shown in Figure 1. Song, et al. Expires January 3, 2019 [Page 9] Internet-Draft Network Telemetry Framework July 2018 +------------------------------+ | | | Network Operation |<-------+ | Applications | | | | | +------------------------------+ | ^ ^ ^ | | | | | V | V V +-----------|---+--------------+ +-----------+ | | | | | | | Control Pl|ane| | | External | | Telemetry | <---> | | Data and | | | | | | Event | | ^ V | Management | | Telemetry | +------|--------+ Plane | | | | V | Telemetry | +-----------+ | | | | Data Plane <---> | | Telemetry | | | | | +---------------+--------------+ Figure 1: Layer Category of the Network Telemetry Framework Note that the interaction with the network operation applications can be indirect. For example, in the management plane telemetry, the management plane may need to acquire data from the data plane. On the other hand, an application may involve more than one plane simultaneously. For example, an SLA compliance application may require both the data plane telemetry and the control plane telemetry. At each plane, the telemetry can be further partitioned into five distinct components: Data Source: Determine where the original data is acquired. The data source usually just provides raw data which needs further processing. A data source can be considered a probe. A probe can be statically installed or dynamically installed. Data Subscription: Determine the protocol and channel for applications to acquire desired data. Data subscription is also responsible to define the desired data that might not be directly available form data sources. The subscription data can be described by a model. The model can be statically installed or dynamically installed. Song, et al. Expires January 3, 2019 [Page 10] Internet-Draft Network Telemetry Framework July 2018 Data Generation: The original data needs to be processed, encoded, and formatted in network devices to meet application subscription requirements. This may involve in-network computing and processing on either the fast path or the slow path in network devices. Data Export: Determine how the ready data are delivered to applications. Data Analysis and Storage: In this final step, data is consumed by applications or stored for future reference. Data analysis can be interactive. It may initiate further data subscription. +------------------------------+ | | | Data Analysis/Storage | | | +------------------------------+ | ^ | | V | +---------------+--------------+ | | | | Data | Data | | Subscription | Export | | | | +---------------+--------------| | | | Data Generation | | | +------------------------------| | | | Data Source | | | +------------------------------+ Figure 2: Components in the Network Telemetry Framework Since most existing standard-related work belongs to the first four components, in the remainder of the document, we focus on these components only. 3.1. Existing Works Mapped in the Framework The following table provides a non-exhaustive list of existing works (mainly published in IETF and with the emphasis on the latest new technologies) and shows their positions in the framework. Song, et al. Expires January 3, 2019 [Page 11] Internet-Draft Network Telemetry Framework July 2018 +-----------+--------------+---------------+--------------+ | | Management | Control | Data | | | Plane | Plane | Plane | +-----------+--------------+---------------+--------------+ | | YANG Data | Control Proto.| Flow/Packet | | Data | Store | Network State | Statistics | | Source | | | States | | | | | DPI | +-----------+--------------+---------------+--------------+ | | gPRC | NETCONF/YANG | NETCONF/YANG | | Data | YANG PUSH | BGP | YANG FSM | | Subscribe | | | | | | | | | +-----------+--------------+---------------+--------------+ | | Soft DNP | Soft DNP | In-situ OAM | | Data | | | IPFPM | | Generation| | | Hard DNP | | | | | | +-----------+--------------+---------------+--------------+ | | gRPC | BMP | IPFIX | | Data | YANG PUSH | | UDP | | Export | UDP | | | | | | | | +-----------+--------------+---------------+--------------+ Figure 3: Existing Work 3.2. Management Plane Telemetry 3.2.1. Requirements and Challenges The management plane of the network element interacts with the Network Management System (NMS), and provides information such as performance data, network logging data, network warning and defects data, and network statistics and state data. Some legacy protocols are widely used for the management plane, such as SNMP and Syslog, but these protocols do not meet the requirements of the automatic network operation applications. New management plane telemetry protocols should consider the following requirements: Convenient Data Subscription: An application should have the freedom to choose the data export means such as the data types and the export frequency. Song, et al. Expires January 3, 2019 [Page 12] Internet-Draft Network Telemetry Framework July 2018 Structured Data: For automatic network operation, machines will replace human for network data comprehension. The schema languages such as YANG can efficiently describe structured data and normalize data encoding and transformation. High Speed Data Transport: In order to retain the information, a server needs to send a large amount of data at high frequency. Compact encoding formats are needed to compress the data and improve the data transport efficiency. The push mode, by replacing the poll mode, can also reduce the interactions between clients and servers, which help to improve the server's efficiency. 3.2.2. Push Extensions for NETCONF NETCONF [RFC6241] is one popular network management protocol, which is also recommended by IETF. Although it can be used for data collection, NETCONF is good at configurations. YANG Push [I-D.ietf-netconf-yang-push] extends NETCONF and enables subscriber applications to request a continuous, customized stream of updates from a YANG datastore. Providing such visibility into changes made upon YANG configuration and operational objects enables new capabilities based on the remote mirroring of configuration and operational state. Moreover, distributed data collection mechanism [I-D.zhou-netconf-multi-stream-originators] via UDP based publication channel [I-D.ietf-netconf-udp-pub-channel] provides enhanced efficiency for the NETCONF based telemetry. 3.2.3. gRPC Network Management Interface gRPC Network Management Interface (gNMI) [I-D.openconfig-rtgwg-gnmi-spec] is a network management protocol based on the gRPC [I-D.kumar-rtgwg-grpc-protocol] RPC (Remote Procedure Call) framework. With a single gRPC service definition, both configuration and telemetry can be covered. gRPC is an HTTP/2 [RFC7540] based open source micro service communication framework. It provides a number of capabilities that makes it well-suited for network telemetry, including: o Full-duplex streaming transport model combined with a binary encoding mechanism provided further improved telemetry efficiency. o gRPC provides higher-level features consistency across platforms that common HTTP/2 libraries typically do not. This characteristic is especially valuable for the fact that telemetry data collectors normally reside on a large variety of platforms. o The built-in load-balancing and failover mechanism. Song, et al. Expires January 3, 2019 [Page 13] Internet-Draft Network Telemetry Framework July 2018 3.3. Control Plane Telemetry 3.3.1. Requirements and Challenges The control plane telemetry refers to the health condition monitoring of different network protocols, which covers Layer 2 to Layer 7. Keeping track of the running status of these protocols is beneficial for detecting, localizing, and even predicting various network issues, as well as network optimization, in real-time and in fine granularities. One of the most challenging problems for the control plane telemetry is how to correlate the E2E Key Performance Indicators (KPI) to a specific layer's KPIs. For example, an IPTV user may describe his User Experience (UE) by the video fluency and definition. Then in case of an unusually poor UE KPI or a service disconnection, it is non-trivial work to delimit and localize the issue to the responsible protocol layer (e.g., the Transport Layer or the Network Layer), the responsible protocol (e.g., ISIS or BGP at the Network Layer), and finally the responsible device(s) with specific reasons. Traditional OAM-based approaches for control plane KPI measurement include PING (L3), Tracert (L3), Y.1731 (L2) and so on. One common issue behind these methods is that they only measure the KPIs instead of reflecting the actual running status of these protocols, making them less effective or efficient for control plane troubleshooting and network optimization. An example of the control plane telemetry is the BGP monitoring protocol (BMP), it is currently used to monitoring the BGP routes and enables rich applications, such as BGP peer analysis, AS analysis, prefix analysis, security analysis, and so on. However, the monitoring of other layers, protocols and the cross-layer, cross-protocol KPI correlations are still in their infancies (e.g., the IGP monitoring is missing), which require substantial further research. 3.3.2. BGP Monitoring Protocol BGP Monitoring Protocol (BMP) [RFC7854] is used to monitor BGP sessions and intended to provide a convenient interface for obtaining route views. The BGP routing information is collected from the monitored device(s) to the BMP monitoring station by setting up the BMP TCP session. The BGP peers are monitored by the BMP Peer Up and Peer Down Notifications. The BGP routes (including Adjacency_RIB_In [RFC7854], Adjacency_RIB_out [I-D.ietf-grow-bmp-adj-rib-out], and Local_Rib [I-D.ietf-grow-bmp-local-rib] are encapsulated in the BMP Route Monitoring Message and the BMP Route Mirroring Message, in the form Song, et al. Expires January 3, 2019 [Page 14] Internet-Draft Network Telemetry Framework July 2018 of both initial table dump and real-time route update. In addition, BGP statistics are reported through the BMP Stats Report Message, which could be either timer triggered or event driven. More BMP extensions can be explored to enrich the applications of BGP monitoring. 3.4. Data Plane Telemetry 3.4.1. Requirements and Challenges An effective data plane telemetry system relies on the data that the network device can expose. The data's quality, quantity, and timeliness must meet some stringent requirements. This raises some challenges to the network data plane devices where the first hand data originate. o A data plane device's main function is user traffic processing and forwarding. While supporting network visibility is important, the telemetry is just an auxiliary function and it should not impede normal traffic processing and forwarding (i.e., the performance is not lowered and the behavior is not altered due to the telemetry functions). o The network operation applications requires end-to-end visibility from various sources, which results in a huge volume of data. However, the sheer data quantity should not stress the network bandwidth, regardless of the data delivery approach (i.e., through in-band or out-of-band channels). o The data plane devices must provide the data in a timely manner with the minimum possible delay. Long processing, transport, storage, and analysis delay can impact the effectiveness of the control loop and even render the data useless. o The data should be structured and labeled, and easy for applications to parse and consume. At the same time, the data types needed by applications can vary significantly. The data plane devices need to provide enough flexibility and programmability to support the precise data provision for applications. o The data plane telemetry should support incremental deployment and work even though some devices are unaware of the system. This challenge is highly relevant to the standards and legacy networks. The industry has agreed that the data plane programmability is essential to support network telemetry. Newer data plane chips are Song, et al. Expires January 3, 2019 [Page 15] Internet-Draft Network Telemetry Framework July 2018 all equipped with advanced telemetry features and provide flexibility to support customized telemetry functions. 3.4.2. Technique Classification There can be multiple possible dimensions to classify the data plane telemetry techniques. Active and Passive: The active and passive methods (as well as the hybrid types) are well documented in [RFC7799]. The passive methods include TCPDUMP, IPFIX [RFC7011], sflow, and traffic mirror. These methods usually have low data coverage. The bandwidth cost is very high in oreder to improve the data coverage. On the other hand, the active methods include Ping, Traceroute, OWAMP [RFC4656], and TWAMP [RFC5357]. These methods are intrusive and only provide indirect network measurement results. The hybrid methods, including in-situ OAM [I-D.brockners-inband-oam-requirements], IPFPM [RFC8321], and Multipoint Alternate Marking [I-D.fioccola-ippm-multipoint-alt-mark], provide a well-balanced and more flexible approach. However, these methods are also more complex to implement. In-Band and Out-of-Band: The telemetry data, before being exported to some collector, can be carried in user packets. Such methods are considered in-band (e.g., in-situ OAM [I-D.brockners-inband-oam-requirements]). If the telemetry data is directly exported to some collector without modifying the user packets, Such mothods are considered out-of-band (e.g., postcard- based INT). It is possible to have hybrid methods. For example, only the telemetry instruction or partitial data is carried by user packets (e.g., IPFPM [RFC8321]). E2E and In-Network: Some E2E methods start from and end at the network end hosts (e.g., Ping). The other methods work in networks and are transparent to end hosts. However, if needed, the in-network methods can be easily extended into end hosts. Flow, Path, and Node: Depending on the telemetry objective, the methods can be flow-based (e.g., in-situ OAM [I-D.brockners-inband-oam-requirements]), path-based (e.g., Traceroute), and node-based (e.g., IPFIX [RFC7011]). 3.4.3. The IPFPM technology The Alternate Marking method is efficient to perform packet loss, delay, and jitter measurements both in an IP and Overlay Networks, as Song, et al. Expires January 3, 2019 [Page 16] Internet-Draft Network Telemetry Framework July 2018 presented in IPFPM [RFC8321] and [I-D.fioccola-ippm-multipoint-alt-mark]. This technique can be applied to point-to-point and multipoint-to- multipoint flows. Alternate Marking creates batches of packets by alternating the value of 1 bit (or a label) of the packet header. These batches of packets are unambiguously recognized over the network and the comparison of packet counters for each batch allows the packet loss calculation. The same idea can be applied to delay measurement by selecting ad hoc packets with a marking bit dedicated for delay measurements. Alternate Marking method needs two counters each marking period for each flow under monitor. For instance, by considering n measurement points and m monitored flows, the order of magnitude of the packet counters for each time interval is n*m*2 (1 per color). Since networks offer rich sets of network performance measurement data (e.g packet counters), traditional approaches run into limitations. One reason is the fact that the bottleneck is the generation and export of the data and the amount of data that can be reasonably collected from the network. In addition, management tasks related to determining and configuring which data to generate lead to significant deployment challenges. Multipoint Alternate Marking approach, described in [I-D.fioccola-ippm-multipoint-alt-mark], aims to resolve this issue and makes the performance monitoring more flexible in case a detailed analysis is not needed. An application orchestrates network performance measurements tasks across the network to allow an optimized monitoring and it can calibrate how deep can be obtained monitoring data from the network by configuring measurement points roughly or meticulously. Using Alternate Marking, it is possible to monitor a Multipoint Network without examining in depth by using the Network Clustering (subnetworks that are portions of the entire network that preserve the same property of the entire network, called clusters). So in case there is packet loss or the delay is too high the filtering criteria could be specified more in order to perform a detailed analysis by using a different combination of clusters up to a per- flow measurement as described in IPFPM [RFC8321]. In summary, an application can configure initially an end to end monitoring between ingress points and egress points of the network. If the network does not experiment issues, this approximate monitoring is good enough and is very cheap in terms of network Song, et al. Expires January 3, 2019 [Page 17] Internet-Draft Network Telemetry Framework July 2018 resources. But, in case of problems, the application becomes aware of the issues from this approximate monitoring and, in order to localize the portion of the network that has issues, configures the measurement points more exhaustively. So a new detailed monitoring is performed. After the detection and resolution of the problem the initial approximate monitoring can be used again. 3.4.4. Dynamic Network Probe Hardware based Dynamic Network Probe (DNP) [I-D.song-opsawg-dnp4iq] provides a programmable means to customize the data that an application collects from the data plane. A direct benefit of DNP is the reduction of the exported data. A full DNP solution covers several components including data source, data subscription, and data generation. The data subscription needs to define the custom data which can be composed and derived from the raw data sources. The data generation takes advantage of the moderate in-network computing to produce the desired data. While DNP can introduce unforeseeable flexibility to the data plane telemetry, it also faces some challenges. It requires a flexible data plane that can be dynamically reprogrammed at run-time. The programming API is yet to be defined. 3.4.5. IP Flow Information Export (IPFIX) protocol Traffic on a network can be seen as a set of flows passing through network elements. IP Flow Information Export (IPFIX) [RFC7011] provides a means of transmitting traffic flow information for administrative or other purposes. A typical IPFIX enabled system includes a pool of Metering Processes collects data packets at one or more Observation Points, optionally filters them and aggregates information about these packets. An Exporter then gathers each of the Observation Points together into an Observation Domain and sends this information via the IPFIX protocol to a Collector. 3.4.6. In-Situ OAM Traditional passive and active monitoring and measurement techniques are either inaccurate or resource-consuming. It is preferable to directly acquire data associated with a flow's packets when the packets pass through a network. In-situ OAM (iOAM) [I-D.brockners-inband-oam-requirements], a data generation technique, embeds a new instruction header to user packets and the instruction directs the network nodes to add the requested data to the packets. Thus, at the path end the packet's experience on the entire forwarding path can be collected. Such firsthand data is invaluable to many network OAM applications. Song, et al. Expires January 3, 2019 [Page 18] Internet-Draft Network Telemetry Framework July 2018 However, iOAM also faces some challenges. The issues on performance impact, security, scalability and overhead limits, encapsulation difficulties in some protocols, and cross-domain deployment need to be addressed. 3.5. External Data and Event Telemetry Events that occur outside the boundaries of the network system are another important source of telemetry information. Correlating both internal telemetry data and external events with the requirements of network systems, as presented in Exploiting External Event Detectors to Anticipate Resource Requirements for the Elastic Adaptation of SDN/NFV Systems [I-D.pedro-nmrg-anticipated-adaptation], provides a strategic and functional advantage to management operations. 3.5.1. Requirements and Challenges As with other sources of telemetry information, the data and events must meet strict requirements, especially in terms of timeliness, which is essential to properly incorporate external event information to management cycles. Thus, the specific challenges are described as follows: o The role of external event detector can be played by multiple elements, including hardware (e.g. physical sensors, such as seismometers) and software (e.g. Big Data sources that analyze streams of information, such as Twitter messages). Thus, the transmitted data must support different shapes but, at the same time, follow a common but extensible ontology. o Since the main function of the external event detectors is actually to perform the notifications, their timeliness is assumed. However, once messages have been dispatched, they must be quickly collected and inserted into the control plane with variable priority, which will be high for important sources and/or important events and low for secondary ones. o The ontology used by external detectors must be easily adopted by current and future devices and applications. Therefore, it must be easily mapped to current information models, such as in terms of YANG. Organizing together both internal and external telemetry information will be key for the general exploitation of the management possibilities of current and future network systems, as reflected in the incorporation of cognitive capabilities to new hardware and software (virtual) elements. Song, et al. Expires January 3, 2019 [Page 19] Internet-Draft Network Telemetry Framework July 2018 4. Security Considerations TBD 5. IANA Considerations This document includes no request to IANA. 6. Contributors The other main contributors of this document are listed as follows. o James N. Guichard, Huawei o Yunan Gu, Huawei 7. Acknowledgments We would like to thank Victor Liu and others who have provided helpful comments and suggestions to improve this document. 8. References 8.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . 8.2. Informative References [I-D.brockners-inband-oam-requirements] Brockners, F., Bhandari, S., Dara, S., Pignataro, C., Gredler, H., Leddy, J., Youell, S., Mozes, D., Mizrahi, T., <>, P., and r. remy@barefootnetworks.com, "Requirements for In-situ OAM", draft-brockners-inband- oam-requirements-03 (work in progress), March 2017. [I-D.fioccola-ippm-multipoint-alt-mark] Fioccola, G., Cociglio, M., Sapio, A., and R. Sisto, "Multipoint Alternate Marking method for passive and hybrid performance monitoring", draft-fioccola-ippm- multipoint-alt-mark-04 (work in progress), June 2018. Song, et al. Expires January 3, 2019 [Page 20] Internet-Draft Network Telemetry Framework July 2018 [I-D.ietf-grow-bmp-adj-rib-out] Evens, T., Bayraktar, S., Lucente, P., Mi, K., and S. Zhuang, "Support for Adj-RIB-Out in BGP Monitoring Protocol (BMP)", draft-ietf-grow-bmp-adj-rib-out-01 (work in progress), March 2018. [I-D.ietf-grow-bmp-local-rib] Evens, T., Bayraktar, S., Bhardwaj, M., and P. Lucente, "Support for Local RIB in BGP Monitoring Protocol (BMP)", draft-ietf-grow-bmp-local-rib-01 (work in progress), February 2018. [I-D.ietf-netconf-udp-pub-channel] Zheng, G., Zhou, T., and A. Clemm, "UDP based Publication Channel for Streaming Telemetry", draft-ietf-netconf-udp- pub-channel-03 (work in progress), July 2018. [I-D.ietf-netconf-yang-push] Clemm, A., Voit, E., Prieto, A., Tripathy, A., Nilsen- Nygaard, E., Bierman, A., and B. Lengyel, "YANG Datastore Subscription", draft-ietf-netconf-yang-push-17 (work in progress), July 2018. [I-D.kumar-rtgwg-grpc-protocol] Kumar, A., Kolhe, J., Ghemawat, S., and L. Ryan, "gRPC Protocol", draft-kumar-rtgwg-grpc-protocol-00 (work in progress), July 2016. [I-D.openconfig-rtgwg-gnmi-spec] Shakir, R., Shaikh, A., Borman, P., Hines, M., Lebsack, C., and C. Morrow, "gRPC Network Management Interface (gNMI)", draft-openconfig-rtgwg-gnmi-spec-01 (work in progress), March 2018. [I-D.pedro-nmrg-anticipated-adaptation] Martinez-Julia, P., "Exploiting External Event Detectors to Anticipate Resource Requirements for the Elastic Adaptation of SDN/NFV Systems", draft-pedro-nmrg- anticipated-adaptation-02 (work in progress), June 2018. [I-D.song-opsawg-dnp4iq] Song, H. and J. Gong, "Requirements for Interactive Query with Dynamic Network Probes", draft-song-opsawg-dnp4iq-01 (work in progress), June 2017. Song, et al. Expires January 3, 2019 [Page 21] Internet-Draft Network Telemetry Framework July 2018 [I-D.zhou-netconf-multi-stream-originators] Zhou, T., Zheng, G., Voit, E., Clemm, A., and A. Bierman, "Subscription to Multiple Stream Originators", draft-zhou- netconf-multi-stream-originators-02 (work in progress), May 2018. [RFC1157] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple Network Management Protocol (SNMP)", RFC 1157, DOI 10.17487/RFC1157, May 1990, . [RFC4656] Shalunov, S., Teitelbaum, B., Karp, A., Boote, J., and M. Zekauskas, "A One-way Active Measurement Protocol (OWAMP)", RFC 4656, DOI 10.17487/RFC4656, September 2006, . [RFC5357] Hedayat, K., Krzanowski, R., Morton, A., Yum, K., and J. Babiarz, "A Two-Way Active Measurement Protocol (TWAMP)", RFC 5357, DOI 10.17487/RFC5357, October 2008, . [RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed., and A. Bierman, Ed., "Network Configuration Protocol (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011, . [RFC7011] Claise, B., Ed., Trammell, B., Ed., and P. Aitken, "Specification of the IP Flow Information Export (IPFIX) Protocol for the Exchange of Flow Information", STD 77, RFC 7011, DOI 10.17487/RFC7011, September 2013, . [RFC7276] Mizrahi, T., Sprecher, N., Bellagamba, E., and Y. Weingarten, "An Overview of Operations, Administration, and Maintenance (OAM) Tools", RFC 7276, DOI 10.17487/RFC7276, June 2014, . [RFC7540] Belshe, M., Peon, R., and M. Thomson, Ed., "Hypertext Transfer Protocol Version 2 (HTTP/2)", RFC 7540, DOI 10.17487/RFC7540, May 2015, . [RFC7799] Morton, A., "Active and Passive Metrics and Methods (with Hybrid Types In-Between)", RFC 7799, DOI 10.17487/RFC7799, May 2016, . Song, et al. Expires January 3, 2019 [Page 22] Internet-Draft Network Telemetry Framework July 2018 [RFC7854] Scudder, J., Ed., Fernando, R., and S. Stuart, "BGP Monitoring Protocol (BMP)", RFC 7854, DOI 10.17487/RFC7854, June 2016, . [RFC8321] Fioccola, G., Ed., Capello, A., Cociglio, M., Castaldelli, L., Chen, M., Zheng, L., Mirsky, G., and T. Mizrahi, "Alternate-Marking Method for Passive and Hybrid Performance Monitoring", RFC 8321, DOI 10.17487/RFC8321, January 2018, . Authors' Addresses Haoyu Song (editor) Huawei 2330 Central Expressway Santa Clara USA Email: haoyu.song@huawei.com Tianran Zhou Huawei 156 Beiqing Road Beijing, 100095 P.R. China Email: zhoutianran@huawei.com Zhenbin Li Huawei 156 Beiqing Road Beijing, 100095 P.R. China Email: lizhenbin@huawei.com Giuseppe Fioccola Telecom Italia Via Reiss Romoli, 274 Torino 10148 Italy Email: giuseppe.fioccola@telecomitalia.it Song, et al. Expires January 3, 2019 [Page 23] Internet-Draft Network Telemetry Framework July 2018 Zhenqiang Li China Mobile No. 32 Xuanwumenxi Ave., Xicheng District Beijing, 100032 P.R. China Email: lizhenqiang@chinamobile.com Pedro Martinez-Julia NICT 4-2-1, Nukui-Kitamachi Koganei, Tokyo 184-8795 Japan Phone: +81 42 327 7293 Email: pedro@nict.go.jp Laurent Ciavaglia Nokia Villarceaux 91460 France Email: laurent.ciavaglia@nokia.com Aijun Wang China Telecom Beiqijia Town, Changping District Beijing, 102209 P.R. China Email: wangaj.bri@chinatelecom.cn Song, et al. Expires January 3, 2019 [Page 24]