Internet-Draft | BBS per Verifier Linkability | March 2024 |

Kalos & Bernstein | Expires 19 September 2024 | [Page] |

- Workgroup:
- CFRG
- Internet-Draft:
- draft-vasilis-bbs-per-verifier-linkability-00
- Published:
- Intended Status:
- Informational
- Expires:

The BBS Signatures scheme describes a multi-message digital signature, that supports selectively disclosing the messages through unlinkable presentations, build using zero-knowledge proofs. Each BBS proof reveals no information other than the signed messages that the Prover chooses to disclose in that specific instance. As such, the Verifier (i.e., the recipient) of the BBS proof, may not be able to track those presentations over time. Although in many applications this is desirable, there are use cases where that require from the Verifier, to be able to track the BBS proofs they receive from the same entity. Examples include monitoring the use of access credentials for abnormal activity, monetization etc.. This document presents the use of pseudonyms with BBS proofs. A pseudonym, is a value that will remain constant each time a Prover presents a BBS proof to the same Verifier, but will be different (and unlinkable), when the Prover interacts with different parties. This provides a way for a recipient to track the presentations intended for them, while also hindering them from tracking the Prover's interactions with other Verifiers.¶

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶

This Internet-Draft will expire on 19 September 2024.¶

Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶

BBS Signatures, defined in [I-D.irtf-cfrg-bbs-signatures] and originally described in the academic work by Dan Boneh, Xavier Boyen, and Hovav Shacham [BBS04], is a signature scheme able to sign multiple messages at once, allowing for selectively disclosing those message while not revealing the signature it self. It does so by creating unlinkable, zero-knowledge proofs-of-knowledge of a signature value on (among other) the disclosed set of messages. More specifically, the BBS Prover, will create a BBS proof that if validated by the Verifier, guarantees that the prover knows a BBS signature on the disclosed messages, guaranteeing this way the revealed messages authenticity and integrity.¶

The BBS Proof is by design unlinkable, meaning that given 2 different BBS proofs, there is no way to tell if they originated from the same BBS signature. This means that if a Prover does not reveal any other identifying information (for example if they are using proxies to hide their IP address etc.), the Verifier of the proof will not be able "track" the different proof presentations or the Provers activity. This is done to guarantee privacy in applications where the Verifier only needs to know that the Prover is in possession of a valid BBS signature over a list of disclosed messages. In a lot of applications however, the Verifier needs to track the presentations made by the Prover over time, as to provide security monitoring, monetization services, configuration persistance etc.. That said, for obvious privacy reasons, the Prover should not reveal a unique identifier that would remain constant across proof presentations to different Verifiers (like their IP address).¶

The goal of this document is to provide a way for a Verifier to track the proof presentations that are intended for them, while at the same time not allowing the tracking of the Prover's activity to other Verifiers. This is done through the use of Pseudonyms. A pseudonym as defined by this document, is a value that will be constant when the Prover presents BBS proofs to the same Verifier, but will change when the Prover interacts with different recipients (with no way to link the 2 distinguee pseudonym values together). This is done by constructing the pseudonym value by combining a unique Verifier identifier with a unique Prover identifier. To avoid forging requests, the Prover's identifier will be signed by the same BBS signature used to generate the BBS proof. This allows extending the BBS proof generation and verification operations with some additional computations, that will be used to prove correctness of the pseudonym, i.e., that it was correctly calculated using the Verifier identifier, as well as, the undisclosed and signed Prover identifier. The Prover identifier MUST be considered secret from the Prover, since, if it is revealed, any entity will be able to track the Prover's activity across all Verifiers.¶

This document will define a new BBS Interface for use with pseudonyms, however it will not define new ciphersuites. Rather it will re-use the ciphersuites defined in Section 6 of [I-D.irtf-cfrg-bbs-signatures]).¶

The following terminology is used throughout this document:¶

- SK
- The secret key for the signature scheme.¶
- PK
- The public key for the signature scheme.¶
- L
- The total number of signed messages.¶
- R
- The number of message indexes that are disclosed (revealed) in a proof-of-knowledge of a signature.¶
- U
- The number of message indexes that are undisclosed in a proof-of-knowledge of a signature.¶
- scalar
- An integer between 0 and r-1, where r is the prime order of the selected groups, defined by each ciphersuite (see also Notation).¶
- generator
- A valid point on the selected subgroup of the curve being used that is employed to commit a value.¶
- signature
- The digital signature output.¶
- presentation_header (ph)
- A payload generated and bound to the context of a specific spk.¶
- INVALID, ABORT
- Error indicators. INVALID refers to an error encountered during the Deserialization or Procedure steps of an operation. An INVALID value can be returned by a subroutine and handled by the calling operation. ABORT indicates that one or more of the initial constraints defined by the operation are not met. In that case, the operation will stop execution. An operation calling a subroutine that aborted must also immediately abort.¶

The following notation and primitives are used:¶

- a || b
- Denotes the concatenation of octet strings a and b.¶
- I \ J
- For sets I and J, denotes the difference of the two sets i.e., all the elements of I that do not appear in J, in the same order as they were in I.¶
- X[a..b]
- Denotes a slice of the array
`X`

containing all elements from and including the value at index`a`

until and including the value at index`b`

. Note when this syntax is applied to an octet string, each element in the array`X`

is assumed to be a single byte.¶ - range(a, b)
- For integers a and b, with a <= b, denotes the ascending ordered list of all integers between a and b inclusive (i.e., the integers "i" such that a <= i <= b).¶
- length(input)
- Takes as input either an array or an octet string. If the input is an array, returns the number of elements of the array. If the input is an octet string, returns the number of bytes of the inputted octet string.¶

Terms specific to pairing-friendly elliptic curves that are relevant to this document are restated below, originally defined in [I-D.irtf-cfrg-pairing-friendly-curves].¶

- E1, E2
- elliptic curve groups defined over finite fields. This document assumes that E1 has a more compact representation than E2, i.e., because E1 is defined over a smaller field than E2. For a pairing-friendly curve, this document denotes operations in E1 and E2 in additive notation, i.e., P + Q denotes point addition and x * P denotes scalar multiplication.¶
- G1, G2
- subgroups of E1 and E2 (respectively) having prime order r.¶
- GT
- a subgroup, of prime order r, of the multiplicative group of a field extension.¶
- e
- G1 x G2 -> GT: a non-degenerate bilinear map.¶
- r
- The prime order of the G1 and G2 subgroups.¶
- BP1, BP2
- base (constant) points on the G1 and G2 subgroups respectively.¶
- Identity_G1, Identity_G2, Identity_GT
- The identity element for the G1, G2, and GT subgroups respectively.¶
- hash_to_curve_g1(ostr, dst) -> P
- A cryptographic hash function that takes an arbitrary octet string as input and returns a point in G1, using the hash_to_curve operation defined in [I-D.irtf-cfrg-hash-to-curve] and the inputted dst as the domain separation tag for that operation (more specifically, the inputted dst will become the DST parameter for the hash_to_field operation, called by hash_to_curve).¶
- point_to_octets_g1(P) -> ostr, point_to_octets_g2(P) -> ostr
- returns the canonical representation of the point P for the respective subgroup as an octet string. This operation is also known as serialization.¶
- octets_to_point_g1(ostr) -> P, octets_to_point_g2(ostr) -> P
- returns the point P for the respective subgroup corresponding to the canonical representation ostr, or INVALID if ostr is not a valid output of the respective point_to_octets_g* function. This operation is also known as deserialization.¶

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶

This document defines a pseudonym as point of the G1 group different from the Identity (`Identity_G1`

) or the base point (`BP1`

) of G1. A pseudonym remains constant for each Prover and Verifier pair, but is unique (and unlinkable) across different Provers or Verifiers. In other words, when the Prover presents multiple BBS proofs with a pseudonym to a Verifier, the pseudonym value will be constant across those presentations. When presenting a BBS proof with a pseudonym to another Verifier however, the pseudonym value will be different. Note that since pseudonyms are group points, their value will necessarily change if a different a ciphersuite with a different curve will be used. This document specifies pseudonyms to be BBS Interface specific (see Section TBD of [I-D.irtf-cfrg-bbs-signatures] for the definition of the BBS Interface). It is outside the scope of this document to provide a procedure for "linking" the pseudonyms that are used by different Interfaces or that are based on different ciphersuites. An option is for the Prover to present both Pseudonyms with the relevant BBS proofs to the Verifier, and upon validation of both, the Verifier to internally link the 2 pseudonyms together.¶

Each pseudonym is constructed from a unique Prover Identifier (`pid`

), which is an octet string that MUST be at least 32 octets long. The `pid`

value will be the last message signed by the BBS signature. In this document the Prover Identifier is chosen by the BBS Signer. This gives the Signer the ability to track the Prover even when they present BBS proofs with pseudonyms to different Verifiers. To avoid this threat, the Prover can choose and "commit" the `pid`

value themselves, using Blind BBS Signatures, as defined in TBD. In any case, the `pid`

value MUST be the last signed message. It also MUST unique across different Provers with very high probability. Additionally, it MUST be indistinguishable from a random value, drawn from the uniform distribution over the space of all octet strings that are at least 32 octets long. Such value could be generated from a cryptographically secure pseudo-random number generator. See [DRBG] for requirements and suggestions on generating randomness.¶

As mentioned above, the pseudonym value is defined as a point of the G1 group. Serialization and deserialization of the pseudonym point MUST be done using the `point_to_octets_g1`

and `octets_to_point_g1`

defined by the BBS ciphersuite used (see Section 6 of [I-D.irtf-cfrg-bbs-signatures]).¶

Each BBS Interface defines an operation that will map the inputted messages to scalar values, required by the core BBS operations. Each Interface can use a different mapping procedure, as long as it comforts to the requirements outlined in TBD. For using BBS with pseudonyms, the mapping operation used by the interface is REQUIRED to additionally adhere the following rule;¶

For each set of messages and separate message msg', if C1 = messages_to_scalars(messages.push(msg')), and msg_prime_scalar = messages_to_scalars((msg')), and C2 = messages_to_scalars(messages).push(msg_prime_scalar), it will always hold that C1 == C2.¶

Informally, the above means that each message is mapped to a scalar independently from all the other messages. For example, if `a = messages_to_scalars((msg_1))`

and `b = messages_to_scalars((msg_2))`

, then `(a, b) = messages_to_scalars((msg_1, msg_2))`

. Its trivial to see that the `messages_to_scalars`

operation that is defined in Section TBD of [I-D.irtf-cfrg-bbs-signatures], has the required property. That operation will be used by the Interface defined in this document to map the messages to scalars. Note that the above operation (and hence the defined by this document Interface), only accepts messages that are octet strings.¶

The following section defines a BBS Interface that will make use of per-origin pseudonyms. The identifier of the Interface is defined as `ciphersuite_id || H2G_HM2S_PSEUDONYM_`

, where `ciphersuite_id`

the unique identifier of the BBS ciphersuite used, as is defined in Section 6 of [I-D.irtf-cfrg-bbs-signatures]). Each BBS Interface MUST define operations to map the inputted messages to scalar values and to create the generators set, required by the core operations. The inputted messages to the defined in this document BBS Interface will be mapped to scalars using the `messages_to_scalars`

operation defined in Section TBD of [I-D.irtf-cfrg-bbs-signatures]. The generators will be created using the `create_generators`

operation defined in Section TBD of [I-D.irtf-cfrg-bbs-signatures].¶

This document also defines 2 alternative core proof generation and verification operations (see Section 5), to accommodate the use of pseudonyms. Those operations will be used by the defined proof generation and verification Interface operations, in place of the `CoreProofGen`

and `CoreProofVerify`

operations defined in Section TBD of [I-D.irtf-cfrg-bbs-signatures].¶

The Issuer of the BBS signature will include a constant unique prover identifier (`pid`

) as one of the signed messages. The format of that identifier is outside the scope of this document. An options is to use a pseudo random generator to return 32 random octets. The `pid`

value MUST be the last one in the set of signed messages.¶

More specifically, the Signer to generate a signature from a secret key (SK), a constant Prover identifier (`pid`

) and optionally over a `header`

and or a vector of `messages`

, MUST execute the following steps,¶

1. messages = messages.push(pid) 2. signature = Sign(SK, PK, header, messages)¶

Where `Sign`

is defined in Section 3.4.1 of [I-D.irtf-cfrg-bbs-signatures], instantiated with the `api_id`

parameter set to the value `ciphersuite_id || H2G_HM2S_PSEUDONYM_`

, where `ciphersuite_id`

the unique identifier of the ciphersuite.¶

To verify the above `signature`

, for a given `pid`

, `header`

and vector of `messages`

, against a supplied public key (`PK`

), the Prover MUST execute the following steps,¶

1. messages = messages.push(pid) 2. signature = Verify(PK, signature, header, messages)¶

The `Verify`

operation is defined in Section 3.4.2 of [I-D.irtf-cfrg-bbs-signatures], instantiated with the `api_id`

parameter set to the value `ciphersuite_id || H2G_HM2S_PSEUDONYM_`

, where `ciphersuite_id`

the unique identifier of the ciphersuite.¶

This section defines operations for generating a pseudonym, as well as using it to calculate a BBS proof. The BBS proof is extended to include a zero-knowledge proof of correctness of the pseudonym value, i.e., that is correctly calculated using the (undisclosed) id of the Prover (`pid`

), and that is "bound" to the underlying BBS signature (i.e., that the `pid`

value is signed by the Signer).¶

The following operation describes how to calculate a pseudonym from the Prover's and the Verifier's unique identifiers (IDs), as well as a BBS Interface identifier (`api_id`

, see TBD). The pseudonym will be unique for different Verifier and interface IDs and constant under constant inputs (i.e., the same `verifier_id`

, `pid`

and `api_id`

values).¶

pseudonym = CalculatePseudonym(verifier_id, pid, api_id) Inputs: - verifier_id (REQUIRED), an octet string, representing the unique proof Verifier identifier. - pid (REQUIRED), an octet string, representing the unique Prover identifier. - api_id (OPTIONAL), an octet string. If not supplied it defaults to the empty octet string (""). Outputs: - pseudonym, A point of G1, different from the Identity_G1, BP1 and P1 (see the Parameters of this operation); or INVALID. Parameters: - hash_to_curve_g1, the hash_to_curve operation defined by the Hash to Curve suite determined by the ciphersuite, through the hash_to_curve_suite parameter. - P1, fixed point of G1, defined by the ciphersuite. Procedure: 1. OP = hash_to_curve_g1(verifier_id, api_id) 2. if OP is INVALID, return INVALID 3. if OP == Identity_G1 or OP == BP1 or OP == P1, return INVALID 3. pid_scalar = messages_to_scalars((pid), api_id) 4. return OP * pid_scalar¶

Thi operation computes a BBS proof with a pseudonym, which is a zero-knowledge, proof-of-knowledge, of a BBS signature, while optionally disclosing any subset of the signed messages. The BBS proof is extended to also include a zero-knowledge proof of correctness of the pseudonym, meaning that it is correctly calculated, using a signed Prover identifier and the supplied Verifier's ID.¶

Validating the proof (see `ProofVerifyWithPseudonym`

defined in Section 4.3), guarantees authenticity and integrity of the header, presentation header and disclosed messages, knowledge of a valid BBS signature as well as correctness and ownership of the pseudonym.¶

This operation makes use of `CoreProofGenWithPseudonym`

as defined in Section 5.1.¶

proof = ProofGenWithPseudonym(PK, signature, Pseudonym, verifier_id, pid, header, ph, messages, disclosed_indexes) Inputs: - PK (REQUIRED), an octet string of the form outputted by the SkToPk operation. - signature (REQUIRED), an octet string of the form outputted by the Sign operation. - Pseudonym (REQUIRED), A point of G1, different from the Identity of G1, as outputted by the CalculatePseudonym operation. - verifier_id (REQUIRED), an octet string, representing the unique proof Verifier identifier. - pid (REQUIRED), an octet string, representing the unique Prover identifier. - header (OPTIONAL), an octet string containing context and application specific information. If not supplied, it defaults to an empty string. - ph (OPTIONAL), an octet string containing the presentation header. If not supplied, it defaults to an empty string. - messages (OPTIONAL), a vector of octet strings. If not supplied, it defaults to the empty array "()". - disclosed_indexes (OPTIONAL), vector of unsigned integers in ascending order. Indexes of disclosed messages. If not supplied, it defaults to the empty array "()". Parameters: - api_id, the octet string ciphersuite_id || "H2G_HM2S_PSEUDONYM_", where ciphersuite_id is defined by the ciphersuite and "H2G_HM2S_PSEUDONYM_" is an ASCII string comprised of 9 bytes. Outputs: - proof, an octet string; or INVALID. Procedure: 1. message_scalars = messages_to_scalars(messages, api_id) 2. pid_scalar = messages_to_scalars((pid), api_id) 3. generators = create_generators(length(messages) + 2, PK, api_id) 4. proof = CoreProofGenWithPseudonym(PK, signature, Pseudonym, verifier_id, pid_scalar, generators, header, ph, message_scalars, disclosed_indexes, api_id) 5. if proof is INVALID, return INVALID 6. return proof¶

This operation validates a BBS proof with a pseudonym, given the Signer's public key (PK), the proof, the pseudonym and the Verifier's identifier that was used to create it, a header and presentation header, the disclosed messages and lastly, the indexes those messages had in the original vector of signed messages. Validating the proof also validates the correctness and ownership by the Prover of the received pseudonym.¶

This operation makes use of `CoreProofVerifyWithPseudonym`

as defined in Section 5.2.¶

result = ProofVerifyWithPseudonym(PK, proof, Pseudonym, verifier_id, header, ph, disclosed_indexes, disclosed_messages) Inputs: - PK (REQUIRED), an octet string of the form outputted by the SkToPk operation. - proof (REQUIRED), an octet string of the form outputted by the ProofGen operation. - Pseudonym (REQUIRED), A point of G1, different from the Identity of G1, as outputted by the CalculatePseudonym operation. - verifier_id (REQUIRED), an octet string, representing the unique proof Verifier identifier. - header (OPTIONAL), an optional octet string containing context and application specific information. If not supplied, it defaults to an empty string. - ph (OPTIONAL), an octet string containing the presentation header. If not supplied, it defaults to an empty string. - disclosed_messages (OPTIONAL), a vector of octet strings. If not supplied, it defaults to the empty array "()". - disclosed_indexes (OPTIONAL), vector of unsigned integers in ascending order. Indexes of disclosed messages. If not supplied, it defaults to the empty array "()". Parameters: - api_id, the octet string ciphersuite_id || "H2G_HM2S_PSEUDONYM_", where ciphersuite_id is defined by the ciphersuite and "H2G_HM2S_PSEUDONYM_" is an ASCII string comprised of 9 bytes. - (octet_point_length, octet_scalar_length), defined by the ciphersuite. Outputs: - result, either VALID or INVALID. Deserialization: 1. proof_len_floor = 2 * octet_point_length + 3 * octet_scalar_length 2. if length(proof) < proof_len_floor, return INVALID 3. U = floor((length(proof) - proof_len_floor) / octet_scalar_length) 4. R = length(disclosed_indexes) 5. L = U + R Procedure: 1. message_scalars = messages_to_scalars(disclosed_messages, api_id) 2. generators = create_generators(L + 1, PK, api_id) 3. result = CoreProofVerifyWithPseudonym(PK, proof, Pseudonym, verifier_id, generators, header, ph, message_scalars, disclosed_indexes, api_id) 4. return result¶

This section defines the core operations used by the `ProofGenWithPseudonym`

and `ProofVerifyWithPseudonym`

operations defined in Section 4.2 and Section 4.3 correspondingly. Those operations are handling the main mathematical procedures required to compute and validate the BBS with pseudonym proof.¶

This operations computes a BBS proof and a zero-knowledge proof of correctness of the pseudonym in "parallel" (meaning using common randomness), as to both create a proof that the pseudonym was correctly calculated using an undisclosed value that the Prover knows (i.e., the `pid`

value), but also that this value is "signed" by the BBS signature (the last undisclosed message). As a result, validating the proof guarantees that the pseudonym is correctly computed and that it was computed using the Prover identifier that was included in the BBS signature.¶

The operation uses the `ProofInit`

and `ProofFinalize`

operations defined in TBD and the `ProofWithPseudonymChallengeCalculate`

defined in Section 6.1.¶

proof = CoreProofGenWithPseudonym(PK, signature, Pseudonym, verifier_id, pid_scalar, generators, header, ph, messages, disclosed_indexes, api_id) Inputs: - PK (REQUIRED), an octet string of the form outputted by the SkToPk operation. - signature (REQUIRED), an octet string of the form outputted by the Sign operation. - Pseudonym (REQUIRED), A point of G1, different from the Identity of G1, as outputted by the CalculatePseudonym operation. - verifier_id (REQUIRED), an octet string, representing the unique proof Verifier identifier. - pid_scalar (REQUIRED), a scalar value, representing the unique Prover identifier after it is mapped to a scalar. - generators (REQUIRED), vector of points in G1. - header (OPTIONAL), an octet string containing context and application specific information. If not supplied, it defaults to an empty string. - ph (OPTIONAL), an octet string containing the presentation header. If not supplied, it defaults to an empty string. - messages (OPTIONAL), a vector of scalars representing the messages. If not supplied, it defaults to the empty array "()". - disclosed_indexes (OPTIONAL), vector of unsigned integers in ascending order. Indexes of disclosed messages. If not supplied, it defaults to the empty array "()". - api_id (OPTIONAL), an octet string. If not supplied it defaults to the empty octet string (""). Parameters: - P1, fixed point of G1, defined by the ciphersuite. Outputs: - proof, an octet string; or INVALID. Deserialization: 1. signature_result = octets_to_signature(signature) 2. if signature_result is INVALID, return INVALID 3. (A, e) = signature_result 4. messages = messages.push(pid_scalar) 5. L = length(messages) 6. R = length(disclosed_indexes) 7. (i1, ..., iR) = disclosed_indexes 8. if R > L, return INVALID 9. U = L - R 10. undisclosed_indexes = range(1, L) \ disclosed_indexes 11. disclosed_messages = (messages[i1], ..., messages[iR]) ABORT if: 1. for i in disclosed_indexes, i < 1 or i > L - 1 Procedure: 1. random_scalars = calculate_random_scalars(3+U) 2. init_res = ProofInit(PK, signature_res, header, random_scalars, generators, messages, undisclosed_indexes, api_id) 3. if init_res is INVALID, return INVALID 4. OP = hash_to_curve_g1(verifier_id) 5. pid~ = random_scalars[3+U] // last element of random_scalars 6. U = OP * pid~ 7. pseudonym_init_res = (Pseudonym, OP, U) 8. challenge = ProofWithPseudonymChallengeCalculate(init_res, pseudonym_init_res, disclosed_indexes, disclosed_messages, ph, api_id) 9. proof = ProofFinalize(challenge, e, random_scalars, messages, undisclosed_indexes) 10. return proof_to_octets(proof)¶

This operation validates a BBS proof that also includes a pseudonym. Validating the proof, other than the correctness and integrity of the revealed messages, the header and the presentation header values, also guarantees that the supplied pseudonym was correctly calculated, i.e., that it was produced using the Verifier's identifier and the signed (but undisclosed) Prover's identifier, following the `CalculatePseudonym`

operation defined in Section 4.2.1.¶

The operation uses the `ProofVerifyInit`

operation defined in TBD and the `ProofWithPseudonymChallengeCalculate`

defined in Section 6.1.¶

result = CoreProofVerifyWithPseudonym(PK, proof, Pseudonym, verifier_id, generators, header, ph, disclosed_messages, disclosed_indexes, api_id) Inputs: - PK (REQUIRED), an octet string of the form outputted by the SkToPk operation. - proof (REQUIRED), an octet string of the form outputted by the ProofGen operation. - Pseudonym (REQUIRED), A point of G1, different from the Identity of G1, as outputted by the CalculatePseudonym operation. - verifier_id (REQUIRED), an octet string, representing the unique proof Verifier identifier. - generators (REQUIRED), vector of points in G1. - header (OPTIONAL), an optional octet string containing context and application specific information. If not supplied, it defaults to an empty string. - ph (OPTIONAL), an octet string containing the presentation header. If not supplied, it defaults to an empty string. - disclosed_messages (OPTIONAL), a vector of scalars representing the messages. If not supplied, it defaults to the empty array "()". - disclosed_indexes (OPTIONAL), vector of unsigned integers in ascending order. Indexes of disclosed messages. If not supplied, it defaults to the empty array "()". - api_id (OPTIONAL), an octet string. If not supplied it defaults to the empty octet string (""). Parameters: - P1, fixed point of G1, defined by the ciphersuite. Outputs: - result, either VALID or INVALID. Deserialization: 1. proof_result = octets_to_proof(proof) 2. if proof_result is INVALID, return INVALID 3. (Abar, Bbar, r2^, r3^, commitments, cp) = proof_result 4. W = octets_to_pubkey(PK) 5. if W is INVALID, return INVALID 6. R = length(disclosed_indexes) 7. (i1, ..., iR) = disclosed_indexes ABORT if: 1. for i in disclosed_indexes, i < 1 or i > R + length(commitments) - 1 Procedure: 1. init_res = ProofVerifyInit(PK, proof_result, header, generators, messages, disclosed_indexes, api_id) 2. OP = hash_to_curve_g1(verifier_id) 3. U = length(commitments) 4. pid^ = commitments[U] // last element of the commitments 5. Uv = OP * pid^ - Pseudonym * cp 6. pseudonym_init_res = (Pseudonym, OP, Uv) 7. challenge = ProofWithPseudonymChallengeCalculate(init_res, pseudonym_init_res, disclosed_indexes, messages, ph, api_id) 8. if cp != challenge, return INVALID 9. if e(Abar, W) * e(Bbar, -BP2) != Identity_GT, return INVALID 10. return VALID¶

challenge = ProofWithPseudonymChallengeCalculate(init_res, pseudonym_init_res, i_array, msg_array, ph) Inputs: - init_res (REQUIRED), vector representing the value returned after initializing the proof generation or verification operations, consisting of 3 points of G1 and a scalar value, in that order. - pseudonym_init_res (REQUIRED), vector representing the value returned after initializing the pseudonym proof, consisting of 3 points of G1. - i_array (REQUIRED), array of non-negative integers (the indexes of the disclosed messages). - msg_array (REQUIRED), array of scalars (the disclosed messages after mapped to scalars). - ph (OPTIONAL), an octet string. If not supplied, it must default to the empty octet string (""). Outputs: - challenge, a scalar. Deserialization: 1. R = length(i_array) 2. (i1, ..., iR) = i_array 3. (msg_i1, ..., msg_iR) = msg_array 4. (Abar, Bbar, C, domain) = init_res 5. (Pseudonym, OP, U) = pseudonym_init_res ABORT if: 1. R > 2^64 - 1 or R != length(msg_array) 2. length(ph) > 2^64 - 1 Procedure: 1. c_arr = (Abar, Bbar, C, Pseudonym, OP, U, R, i1, ..., iR, msg_i1, ..., msg_iR, domain) 2. c_octs = serialize(c_array) 3. return hash_to_scalar(c_octs || I2OSP(length(ph), 8) || ph)¶

TODO Security¶

This document does not define new BBS ciphersuites. Its ciphersuite defined in Section 6 of [I-D.irtf-cfrg-bbs-signatures]) can be used to instantiate the operations of the described scheme.¶

This document has no IANA actions.¶

- [I-D.irtf-cfrg-bbs-signatures]
- Looker, T., Kalos, V., Whitehead, A., and M. Lodder, "The BBS Signature Scheme", Work in Progress, Internet-Draft, draft-irtf-cfrg-bbs-signatures-05, , <https://datatracker.ietf.org/doc/html/draft-irtf-cfrg-bbs-signatures-05>.
- [I-D.irtf-cfrg-hash-to-curve]
- Faz-Hernandez, A., Scott, S., Sullivan, N., Wahby, R. S., and C. A. Wood, "Hashing to Elliptic Curves", Work in Progress, Internet-Draft, draft-irtf-cfrg-hash-to-curve-16, , <https://datatracker.ietf.org/doc/html/draft-irtf-cfrg-hash-to-curve-16>.
- [I-D.irtf-cfrg-pairing-friendly-curves]
- Sakemi, Y., Kobayashi, T., Saito, T., and R. S. Wahby, "Pairing-Friendly Curves", Work in Progress, Internet-Draft, draft-irtf-cfrg-pairing-friendly-curves-11, , <https://datatracker.ietf.org/doc/html/draft-irtf-cfrg-pairing-friendly-curves-11>.
- [RFC2119]
- Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/info/rfc2119>.
- [RFC8174]
- Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/info/rfc8174>.

- [BBS04]
- Boneh, D., Boyen, X., and H. Shacham, "Short Group Signatures", In Advances in Cryptology, pages 41-55, , <https://link.springer.com/chapter/10.1007/978-3-540-28628-8_3>.
- [DRBG]
- NIST, "Recommendation for Random Number Generation Using Deterministic Random Bit Generators", <https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-90Ar1.pdf>.

TODO acknowledge.¶