Network Working Group                                       C. Partridge
Request for Comments: 1152                  BBN Systems and Technologies
                                                              April 1990

                            Workshop Report
              Internet Research Steering Group Workshop on
                        Very-High-Speed Networks

Status of this Memo

   This memo is a report on a workshop sponsored by the Internet
   Research Steering Group.  This memo is for information only.  This
   RFC does not specify an Internet standard.  Distribution of this memo
   is unlimited.


   The goal of the workshop was to gather together a small number of
   leading researchers on high-speed networks in an environment
   conducive to lively thinking.  The hope is that by having such a
   workshop the IRSG has helped to stimulate new or improved research in
   the area of high-speed networks.

   Attendance at the workshop was limited to fifty people, and attendees
   had to apply to get in.  Applications were reviewed by a program
   committee, which accepted about half of them.  A few key individuals
   were invited directly by the program committee, without application.
   The workshop was organized by Dave Clark and Craig Partridge.

   This workshop report is derived from session writeups by each of the
   session chairman, which were then reviewed by the workshop

Session 1: Protocol Implementation (David D. Clark, Chair)

   This session was concerned with what changes might be required in
   protocols in order to achieve very high-speed operation.

   The session was introduced by David Clark (MIT LCS), who claimed that
   existing protocols would be sufficient to go at a gigabit per second,
   if that were the only goal.  In fact, proposals for high-speed
   networks usually include other requirements as well, such as going
   long distances, supporting many users, supporting new services such
   as reserved bandwidth, and so on.  Only by examining the detailed
   requirements can one understand and compare various proposals for
   protocols.  A variety of techniques have been proposed to permit
   protocols to operate at high speeds, ranging from clever

Partridge                                                       [Page 1]

RFC 1152                  IRSG Workshop Report                April 1990

   implementation to complete relayering of function.  Clark asserted
   that currently even the basic problem to be solved is not clear, let
   alone the proper approach to the solution.

   Mats Bjorkman (Uppsala University) described a project that involved
   the use of an outboard protocol processor to support high-speed
   operation.  He asserted that his approach would permit accelerated
   processing of steady-state sequences of packets.  Van Jacobson (LBL)
   reported results that suggest that existing protocols can operate at
   high speeds without the need for outboard processors.  He also argued
   that resource reservation can be integrated into a connectionless
   protocol such as IP without losing the essence of the connectionless
   architecture.  This is in contrast to a more commonly held belief
   that full connection setup will be necessary in order to support
   resource reservation.  Jacobson said that he has an experimental IP
   gateway that supports resource reservation for specific packet
   sequences today.

   Dave Borman (Cray Research) described high-speed execution of TCP on
   a Cray, where the overhead is most probably the system and I/O
   architecture rather than the protocol.  He believes that protocols
   such as TCP would be suitable for high-speed operation if the windows
   and sequence spaces were large enough. He reported that the current
   speed of a TCP transfer between the processors of a Cray Y-MP was
   over 500 Mbps.  Jon Crowcroft (University College London) described
   the current network projects at UCL.  He offered a speculation that
   congestion could be managed in very high-speed networks by returning
   to the sender any packets for which transmission capacity was not

   Dave Feldmeier (Bellcore) reported on the Bellcore participation in
   the Aurora project, a joint experiment of Bellcore, IBM, MIT, and
   UPenn, which has the goal of installing and evaluating two sorts of
   switches at gigabit speeds between those four sites.  Bellcore is
   interested in switch and protocol design, and Feldmeier and his group
   are designing and implementing a 1 Gbps transport protocol and
   network interface.  The protocol processor will have special support
   for such things as forward error correction to deal with ATM cell
   loss in VLSI; a new FEC code and chip design have been developed to
   run at 1 Gbps.

   Because of the large number of speakers, there was no general
   discussion after this session.

Partridge                                                       [Page 2]

RFC 1152                  IRSG Workshop Report                April 1990

Session 2: High-Speed Applications (Keith Lantz, Chair)

   This session focused on applications and the requirements they impose
   on the underlying networks.  Keith Lantz (Olivetti Research
   California) opened by introducing the concept of the portable office
   - a world where a user is able to take her work with her wherever she
   goes.  In such an office a worker can access the same services and
   the same people regardless of whether she is in the same building
   with those services and people, at home, or at a distant site (such
   as a hotel) - or whether she is equipped with a highly portable,
   multi-media workstation, which she can literally carry with her
   wherever she goes.  Thus, portable should be interpreted as referring
   to portability of access to services rather than to portability of
   hardware.  Although not coordinated in advance, each of the
   presentations in this session can be viewed as a perspective on the
   portable office.

   The bulk of Lantz's talk focused on desktop teleconferencing - the
   integration of traditional audio/video teleconferencing technologies
   with workstation-based network computing so as to enable
   geographically distributed individuals to collaborate, in real time,
   using multiple media (in particular, text, graphics, facsimile,
   audio, and video) and all available computer-based tools, from their
   respective locales (i.e., office, home, or hotel).  Such a facility
   places severe requirements on the underlying network.  Specifically,
   it requires support for several data streams with widely varying
   bandwidths (from a few Kbps to 1 Gbps) but generally low delay, some
   with minimal jitter (i.e., isochronous), and all synchronized with
   each other (i.e., multi-channel or media synchronization).  It
   appears that high-speed network researchers are paying insufficient
   attention to the last point, in particular.  For example, the bulk of
   the research on ATM has assumed that channels have independent
   connection request and burst statistics; this is clearly not the case
   in the context of desktop teleconferencing.

   Lantz also stressed the need for adaptive protocols, to accommodate
   situations where the capacity of the network is exceeded, or where it
   is necessary to interoperate with low-speed networks, or where human
   factors suggest that the quality of service should change (e.g.,
   increasing or decreasing the resolution of a video image).  Employing
   adaptive protocols suggests, first, that the interface to the network
   protocols must be hardware-independent and based only on quality of
   service.  Second, a variety of code conversion services should be
   available, for example, to convert from one audio encoding scheme to
   another.  Promising examples of adaptive protocols in the video
   domain include variable-rate constant-quality coding, layered or
   embedded coding, progressive transmission, and (most recently, at
   UC-Berkeley) the extension of the concepts of structured graphics to

Partridge                                                       [Page 3]

RFC 1152                  IRSG Workshop Report                April 1990

   video, such that the component elements of the video image are kept
   logically separate throughout the production-to-presentation cycle.

   Charlie Catlett (National Center for Supercomputing Applications)
   continued by analyzing a specific scientific application, simulation
   of a thunderstorm, with respect to its network requirements.  The
   application was analyzed from the standpoint of identifying data flow
   and the interrelationships between the computational algorithms, the
   supercomputer CPU throughput, the nature and size of the data set,
   and the available network services (throughput, delay, etc).

   Simulation and the visualization of results typically involves
   several steps:

      1.  Simulation

      2.  Tessellation (transform simulation data into three-dimensional
          geometric volume descriptions, or polygons)

      3.  Rendering (transform polygons into raster image)

   For the thunderstorm simulation, the simulation and tessellation are
   currently done using a Cray supercomputer and the resulting polygons
   are sent to a Silicon Graphics workstation to be rendered and
   displayed.  The simulation creates data at a rate of between 32 and
   128 Mbps (depending on the number of Cray-2 processors working on the
   simulation) and the tessellation output data rate is in typically in
   the range of 10 to 100 Mbps, varying with the complexity of the
   visualization techniques.  The SGI workstation can display 100,000
   polygons/sec which for this example translates to up to 10
   frames/sec.  Analysis tools such as tracer particles and two-
   dimensional slices are used interactively at the workstation with
   pre-calculated polygon sets.

   In the next two to three years, supercomputer speeds of 10-30 GFLOPS
   and workstation speeds of up to 1 GFLOPS and 1 million
   polygons/second display are projected to be available.  Increased
   supercomputer power will yield a simulation data creation rate of up
   to several Gbps for this application.  The increased workstation
   power will allow both tessellation and rendering to be done at the
   workstation.  The use of shared window systems will allow multiple
   researchers on the network to collaborate on a simulation, with the
   possibility of each scientist using his or her own visualization
   techniques with the tessellation process running on his or her
   workstation.  Further developments, such as network virtual memory,
   will allow the tessellation processes on the workstations to access
   variables directly in supercomputer memory.

Partridge                                                       [Page 4]

RFC 1152                  IRSG Workshop Report                April 1990

   Terry Crowley (BBN Systems and Technologies) continued the theme of
   collaboration, in the context of real-time video and audio, shared
   multimedia workspaces, multimedia and video mail, distributed file
   systems, scientific visualization, network access to video and image
   information, transaction processing systems, and transferring data
   and computational results between workstations and supercomputers.
   In general, such applications could help groups collaborate by
   directly providing communication channels (real-time video, shared
   multimedia workspaces), by improving and expanding on the kinds of
   information that can be shared (multimedia and video mail,
   supercomputer data and results), and by reducing replication and the
   complexity of sharing (distributed file systems, network access to
   video and image information).

   Actual usage patterns for these applications are hard to predict in
   advance.  For example, real-time video might be used for group
   conferencing, for video phone calls, for walking down the hall, or
   for providing a long-term shared viewport between remote locations in
   order to help establish community ties.  Two characteristics of
   network traffic that we can expect are the need to provide multiple
   data streams to the end user and the need to synchronize these
   streams.  These data streams will include real-time video, access to
   stored video, shared multimedia workspaces, and access to other
   multimedia data.  A presentation involving multiple data streams must
   be synchronized in order to maintain cross-references between them
   (e.g., pointing actions within the shared multimedia workspace that
   are combined with a voice request to delete this and save that).
   While much traffic will be point-to-point, a significant amount of
   traffic will involve conferences between multiple sites.  A protocol
   providing a multicast capability is critical.

   Finally, Greg Watson (HP) presented an overview of ongoing work at
   the Hewlett-Packard Bristol lab.  Their belief is that, while
   applications for high-speed networks employing supercomputers are the
   the technology drivers, the economic drivers will be applications
   requiring moderate bandwidth (say 10 Mbps) that are used by everyone
   on the network.

   They are investigating how multimedia workstations can assist
   distributed research teams - small teams of people who are
   geographically dispersed and who need to work closely on some area of
   research.  Each workstation provides multiple video channels,
   together with some distributed applications running on personal
   computers.  The bandwidth requirements per workstation are about 40
   Mbps, assuming a certain degree of compression of the video channels.
   Currently the video is distributed as an analog signal over CATV
   equipment.  Ideally it would all be carried over a single, unified
   wide-area network operating in the one-to-several Gbps range.

Partridge                                                       [Page 5]

RFC 1152                  IRSG Workshop Report                April 1990

   They have constructed a gigabit network prototype and are currently
   experimenting with uncompressed video carried over the same network
   as normal data traffic.

Session 3: Lightwave Technology and its Implications (Ira Richer, Chair)

   Bob Kennedy (MIT) opened the session with a talk on network design in
   an era of excess bandwidth.  Kennedy's research is focused on multi-
   purpose networks in which bandwidth is not a scarce commodity,
   networks with bandwidths of tens of terahertz.  Kennedy points out
   that a key challenge in such networks is that electronics cannot keep
   up with fiber speeds.  He proposes that we consider all-optical
   networks (in which all signals are optical) with optoelectronic nodes
   or gateways capable of recognizing and capturing only traffic
   destined for them, using time, frequency, or code divisions of the
   huge bandwidth.  The routing algorithms in such networks would be
   extremely simple to avoid having to convert fiber-optics into slower
   electronic pathways to do switching.

   Rich Gitlin (AT&T Bell Labs) gave a talk on issues and opportunities
   in broadband telecommunications networks, with emphasis on the role
   of fiber optic and photonic technology.  A three-level architecture
   for a broadband telecommunications network was presented.  The
   network is B-ISDN/ATM 150 (Mbps) based and consists of: customer
   premises equipment (PBXs, LANs, multimedia terminals) that access the
   network via a router/gateway, a Network Node (which is a high
   performance ATM packet switch) that serves both as a LAN-to-LAN
   interconnect and as a packet concentrator for traffic destined for
   CPE attached to other Network Nodes, and a backbone layer that
   interconnects the NODES via a Digital Cross-Connect System that
   provide reconfigurable SONET circuits between the NODES (the use of
   circuits minizes delay and avoids the need for implementation of
   peak-transmission-rate packet switching).  Within this framework, the
   most likely places for near-term application of photonics, apart from
   pure transport (ie, 150 Mbps channels in a 2.4 Gbps SONET system),
   are in the Cross-Connect (a Wavelength Division Multiplexed based
   structure was described) and in next-generation LANs that provide
   Gigabit per second throughputs by use of multiple fibers, concurrent
   transmission, and new access mechanisms (such as store and forward).

   A planned interlocation Bell Labs multimedia gigabit/sec research
   network, LuckyNet, was described that attempts to extend many of the
   above concepts to achieve its principal goals: provision of a gigabit
   per second capability to a heterogeneous user community, the
   stimulation of applications that require Gpbs throughput (initial
   applications are video conferencing and LAN interconnect), and, to
   the extent possible, be based on standards so that interconnection
   with other Gigabit testbeds is possible.

Partridge                                                       [Page 6]

RFC 1152                  IRSG Workshop Report                April 1990

Session 4: High Speed Networks and the Phone System
           (David Tennenhouse, Chair)

   David Tennenhouse (MIT) reported on the ATM workshop he hosted the
   two days previous to this workshop.  His report will appear as part
   of the proceedings of his workshop.

   Wally St. John (LANL) followed with a presentation on the Los Alamos
   gigabit testbed.  This testbed is based on the High Performance
   Parallel Interface (HPPI) and on crossbar switch technology.  LANL
   has designed its own 16x16 crossbar switch and has also evaluated the
   Network Systems 8x8 crossbar switch. Future plans for the network
   include expansion to the CASA gigabit testbed.  The remote sites (San
   Diego Supercomputer Center, Caltech, and JPL) are configured
   similarly to the LANL testbed.  The long-haul interface is from HPPI
   to/from SONET (using ATM if in time).

   Wally also discussed some of the problems related to building a
   HPPI-SONET gateway:

      a)  Flow control.  The HPPI, by itself, is only readily extensible
          to 64 km because of the READY-type flow control used in the
          physical layer.  The gateway will need to incorporate larger
          buffers and independent flow control.

      b)  Error-rate expectations.  SONET is only specified to have a
          1E-10 BER on a per hop basis.  This is inadequate for long
          links.  Those in the know say that SONET will be much better
          but the designer is faced with the poor BER in the SONET spec.

      c)  Frame mapping.  There are several interesting issues to be
          considered in finding a good mapping from the HPPI packet
          to the SONET frame.  Some are what SONET STS levels will be
          available in what time frame, the availability of concatenated
          service, and the error rate issue.

   Dan Helman (UCSC) talked about work he has been doing with Darrell
   Long to examine the interconnection of Internet networks via an ATM
   B-ISDN network.  Since network interfaces and packet processing are
   the expensive parts of high-speed networks, they believe it doesn't
   make sense to use the ATM backbone only for transmission; it should
   be used for switching as well.  Therefore gateways (either shared by
   a subnet or integrated with fast hosts) are needed to encapsulate or
   convert conventional protocols to ATM format.  Gateways will be
   responsible for caching connections to recently accessed
   destinations.  Since many short-lived low-bandwidth connections as
   foreseen (e.g., for mail and ftp), routing in the ATM network (to set
   up connections) should not be complicated - a form of static routing

Partridge                                                       [Page 7]

RFC 1152                  IRSG Workshop Report                April 1990

   should be adequate.  Connection performance can be monitored by the
   gateways.  Connections are reestablished if unacceptable.  All
   decision making can be done by gateways and route servers at low
   packet rates, rather than the high aggregate rate of the ATM network.
   One complicated issue to be addressed is how to transparently
   introduce an ATM backbone alongside the existing Internet.

Session 5: Distributed Systems (David Farber, Chair)

   Craig Partridge (BBN Systems and Technologies) started this session
   by arguing that classic RPC does not scale well to gigabit-speed
   networks.  The gist of his argument was that machines are getting
   faster and faster, while the round-trip delay of networks is staying
   relatively constant because we cannot send faster than the speed of
   light.  As a result, the effective cost of doing a simple RPC,
   measured in instruction cycles spent waiting at the sending machine,
   will become extremely high (millions of instruction cycles spent
   waiting for the reply to an RPC).  Furthermore, the methods currently
   used to improve RPC performance, such as futures and parallel RPC, do
   not adequately solve this problem.  Future requests will have to be
   made much much earlier if they are to complete by the time they are
   needed.  Parallel RPC allows multiple threads, but doesn't solve the
   fact that each individual sequence of RPCs still takes a very long

   Craig went on to suggest that there are at least two possible ways
   out of the problem.  One approach is to try to do a lot of caching
   (to waste bandwidth to keep the CPU fed).  A limitation of this
   approach is that at some point the cache becomes so big that you have
   to keep in consistent with other systems' caches, and you suddenly
   find yourself doing synchronization RPCs to avoid doing normal RPCs
   (oops!).  A more promising approach is to try to consolidate RPCs
   being sent to the same machine into larger operations which can be
   sent as a single transaction, run on the remote machine, and the
   result returned.  (Craig noted that he is pursuing this approach in
   his doctoral dissertation at Harvard).

   Ken Schroder (BBN Systems and Technologies) gave a talk on the
   challenges of combining gigabit networks with wide-area heterogeneous
   distributed operating systems.  Ken feels the key goals of wide area
   distributed systems will be to support large volume data transfers
   between users of conferencing and similar applications, and to
   deliver information to a large number of end users sharing services
   such as satellite image databases.  These distributed systems will be
   motivated by the natural distribution of users, of information and of
   expensive special purpose computer resources.

   Ken pointed to three of the key problems that must be addressed at

Partridge                                                       [Page 8]

RFC 1152                  IRSG Workshop Report                April 1990

   the system level in these environments: how to provide high
   utilization; how to manage consistency and synchronization in the
   presence of concurrency and non-determinism; and how to construct
   scalable system and application services.  Utilization is key only to
   high performance applications, where current systems would be limited
   by the cost of factors such as repeatedly copying messages,
   converting data representations and switching between application and
   operating system.  Concurrency can be used improve performance, but
   is also likely to occur in many programs inadvertently because of
   distribution.  Techniques are required both to exploit concurrency
   when it is needed, and to limit it when non-determinism can lead to
   incorrect results.  Extensive research on ensuring consistency and
   resolving resource conflicts has been done in the database area,
   however distributed scheduling and the need for high availability
   despite partial system failures introduce special problems that
   require additional research.  Service scalability will be required to
   support customer needs as the size of the user community grow.  It
   will require attention both ensuring that components do not break
   when they are subdivided across additional processors to support a
   larger user population, and to ensure that performance does to each
   user can be affordably maintained as new users are added.

   In a bold presentation, Dave Cheriton (Stanford) made a sweeping
   argument that we are making a false dichotomy between distributed
   operating systems and networks.  In a gigabit world, he argued, the
   major resource in the system is the network, and in a normal
   operating system we would expect such a critical resource to be
   managed by the operating system.  Or, put another way, the gigabit
   network distributed operating system should manage the network.
   Cheriton went on to say that if a gigabit distributed operating
   system is managing the network, then it is perfectly reasonable to
   make the network very dumb (but fast) and put the system intelligence
   in the operating systems on the hosts that form the distributed

   In another talk on interprocess communication, Jonathan Smith (UPenn)
   again raised the problem of network delay limiting RPC performance.
   In contrast to Partridge's earlier talk, Smith argued that the
   appropriate approach is anticipation or caching.  He justified his
   argument with a simple cost example.  If a system is doing a page
   fetch between two systems which have a five millisecond round-trip
   network delay between them, the cost of fetching n pages is:

                         5 msec + (n-1) * 32 usec

   Thus the cost of fetching an additional page is only 32 usec, but
   underfetching and having to make another request to get a page you
   missed costs 5000 usec.  Based on these arguments, Smith suggested

Partridge                                                       [Page 9]

RFC 1152                  IRSG Workshop Report                April 1990

   that we re-examine work in virtual memory to see if there are
   comfortable ways to support distributed virtual memory with

   In the third talk on RPC in the session, Tommy Joseph (Olivetti), for
   reasons similar to those of Partridge and Smith, argued that we have
   to get rid of RPC and give programmers alternative programming
   paradigms.  He sketched out ideas for asynchronous paradigms using
   causal consistency, in which systems ensure that operations happen in
   the proper order, without synchronizing through a single system.

Session 6: Hosts and Host Interfaces (Gary Delp, Chair)

   Gary Delp (IBM Research) discussed several issues involved in the
   increase in speed of network attachment to hosts of increasing
   performance.  These issues included:

      -  Media Access - There are aspects of media access that are
         best handled by dedicated silicon, but there are also aspects
         that are best left to a general-purpose processor.

      -  Compression - Some forms of compression/expansion may belong
         on the network interface; most will be application-specific.

      -  Forward Error Correction - The predicted major packet loss
         mode is packet drops due to internal network congestion, rather
         than bit errors, so forward error correction internal to a
         packet may not be useful.  On the other hand, the latency cost
         of not being able to recover from bit errors is very high.
         Some proposals were discussed which suggest that FEC among
         packet groups, with dedicated hardware support, is the way
         to go.

      -  Encryption/Decryption - This is a computationally intensive
         task.  Most agree that if it is done with all traffic, some
         form of hardware support is helpful.  Where does it fit in the
         protocol stack?

      -  Application Memory Mapping - How much of the host memory
         structure should be exposed to the network interface?
         Virtual memory and paging complicate this issue considerably.

      -  Communication with Other Channel Controllers - Opinions were
         expressed that ranged from absolutely passive network
         interfaces to interfaces that run major portions of the
         operating system and bus arbitration codes.

      -  Blocking/Segmentation - The consensus is that B/S should

Partridge                                                      [Page 10]

RFC 1152                  IRSG Workshop Report                April 1990

         occur wherever the transport layer is processed.

      -  Routing - This is related to communications with other
         controllers.  A routing-capable interface can reduce the bus
         requirements by a factor of two.

      -  Intelligent participation in the host structure as a gateway,
         router, or bridge.

      -  Presentation Layer issues - All of the other overheads can be
         completely overshadowed by this issue if it is not solved well
         and integrated into the overall host architecture.  This points
         out the need for some standardization of representation (IEEE
         floating point, etc.)

   Eric Cooper (CMU) summarized some initial experience with Nectar, a
   high-speed fiber-optic LAN that has been built at Carnegie Mellon.
   Nectar consists of an arbitrary mesh of crossbar switches connected
   by means of 100 Mbps fiber-optic links.  Hosts are connected to
   crossbar switches via communication processor boards called CABs.
   The CAB presents a memory-mapped interface to user processes and
   off-loads all protocol processing from the host.

   Preliminary performance figures show that latency is currently
   limited by the number of VME operations required by the host-to-CAB
   shared memory interface in the course of sending and receiving a
   message.  The bottleneck in throughput is the speed of the VME
   interface: although processes running on the CABs can communicate
   over Nectar at 70 Mbps, processes on the hosts are limited to
   approximately 25 Mbps.

   Jeff Mogul (DEC Western Research Lab) made these observations:
   Although off-board protocol processors have been a popular means to
   connect a CPU to a network, they will be less useful in the future.
   In the hypothetical workstation of the late 1990s, with a 1000-MIPS
   CPU and a Gbps LAN, an off-board protocol processor will be of no
   use.  The bottleneck will not be the computation required to
   implement the protocol, but the cost of moving the packet data into
   the CPU's cache and the cost of notifying the user process that the
   data is available.  It will take far longer (hundreds of instruction
   cycles) to perform just the first cache miss (required to get the
   packet into the cache) than to perform all of the instructions
   necessary to implement IP and TCP (perhaps a hundred instructions).

   A high-speed network interface for a reasonably-priced system must be
   designed with this cost structure in mind; it should also eliminate
   as many CPU interrupts as possible, since interrupts are also very
   expensive.  It makes more sense to let a user process busy-wait on a

Partridge                                                      [Page 11]

RFC 1152                  IRSG Workshop Report                April 1990

   network-interface flag register than to suspend it and then take an
   interrupt; the normal CPU scheduling mechanism is more efficient than
   interrupts if the network interactions are rapid.

   David Greaves (Olivetti Research Ltd.) briefly described the need for
   a total functionality interface architecture that would allow the
   complete elimination of communication interrupts.  He described the
   Cambridge high-speed ring as an ATM cell-like interconnect that
   currently runs at 500-1000 MBaud, and claims that ATM at that speed
   is a done deal.   Dave Tennenhouse also commented that ATM at high
   speeds with parallel processors is not the difficult thing that
   several others have been claiming.

   Bob Beach (Ultra Technologies) started his talk with the observation
   that networking could be really fast if only we could just get rid of
   the hosts.   He then supported his argument with illustrations of
   80-MByte/second transfers to frame buffers from Crays that drop to
   half that speed when the transfer is host-to-host.  Using null
   network layers and proprietary MAC layers, the Ultra Net system can
   communicate application-to-application with ISO TP4 as the transport
   layer at impressive rates of speed.  The key to high-speed host
   interconnects has been found to be both large packets and large (on
   the order of one megabyte) channel transfer requests.  Direct DMA
   interfaces exhibit much smaller transfer latencies.

   Derek McAuley (University Cambridge Computer Laboratory) described
   work of the Fairisle project which is producing an ATM network based
   on fast packet switches.  A RISC processor (12 MIPS) is used in the
   host interface to do segmentation/reassembly/demultiplexing.  Line
   rates of up to 150 Mbps are possible even with this modest processor.
   Derek has promised that performance and requirement results from this
   system will be published in the spring.

   Bryan Lyles (XEROX PARC) volunteered to give an abbreviated talk in
   exchange for discussion rights.  He reported that Xerox PARC is
   interested in ATM technology and wants to install an ATM LAN at the
   earliest possible opportunity.  Uses will include such applications
   as video where guaranteed quality of service (QOS) is required.  ATM
   technology and the desire for guaranteed QOS places a number of new
   constraints on the host interface.  In particular, they believe that
   they will be forced towards rate-based congestion control.  Because
   of implementation issues and burst control in the ATM switches, the
   senders will be forced to do rate based control on a cell-by-cell

   Don Tolmie (Los Alamos National Laboratory) described the High-
   Performance Parallel Interface (HPPI) of ANSI task group X3T9.3.  The
   HPPI is a standardized basic building block for implementing, or

Partridge                                                      [Page 12]

RFC 1152                  IRSG Workshop Report                April 1990

   connecting to, networks at the Gbps speeds, be they ring, hub,
   cross-bar, or long-haul based.  The HPPI physical layer operates at
   800 or 1600 Mbps over 25-meter twisted-pair copper cables in a
   point-to-point configuration.  The HPPI physical layer has almost
   completed the standards process, and a companion HPPI data framing
   standard is under way, and a Fiber Channel standard at comparable
   speeds is also being developed.  Major companies have completed, or
   are working on, HPPI interfaces for supercomputers, high-end
   workstations, fiber-optic extenders, and networking components.

   The discussion at the end of the session covered a range of topics.
   The appropriateness of outboard protocol processing was questioned.
   Several people agreed that outboarding on a Cray (or similar
   cost/performance) machines makes economic sense.  Van Jacobson
   contended that for workstations, a simple memory-mapped network
   interface that provides packets visible to the host processor may
   well be the ideal solution.

   Bryan Lyles reiterated several of his earlier points, asserting that
   when we talk about host interfaces and how to build them we should
   remember that we are really talking about process-to-process
   communication, not CPU-to-CPU communication.  Not all processes run
   on the central CPU, e.g., graphics processors and multimedia.
   Outboard protocol processing may be a much better choice for these

   This is especially true when we consider that memory/bus bandwidth is
   often a bottleneck.  When our systems run out of bandwidth, we are
   forced towards a NUMA model and multiple buses to localize memory

   Because of QOS issues, the receiver must be able to tell the sender
   how fast it can send.  Throwing away cells (packets) will not work
   because unwanted packets will still clog the receiver's switch
   interface, host interface, and requires processing to throw away.

Session 7: Congestion Control (Scott Shenker, Chair)

   The congestion control session had six talks.  The first two talks
   were rather general, discussing new approaches and old myths.  The
   other four talks discussed specific results on various aspects of
   packet (or cell) dropping: how to avoid drops, how to mitigate their
   impact on certain applications, a calculation of the end-to-end
   throughput in the presence of drops, and how rate-based flow control
   can reduce buffer usage.  Thumbnail sketches of the talks follow.

   In the first of the general talks, Scott Shenker (XEROX PARC)
   discussed how ideas from economics can be applied to congestion

Partridge                                                      [Page 13]

RFC 1152                  IRSG Workshop Report                April 1990

   control.  Using economics, one can articulate questions about the
   goals of congestion control, the minimal feedback necessary to
   achieve those goals, and the incentive structure of congestion
   control.  Raj Jain (DEC) then discussed eight myths related to
   congestion control in high-speed networks.  Among other points, Raj
   argued that (1) congestion problems will not become less important
   when memory, processors, and links become very fast and cheap, (2)
   window flow control is required along with rate flow control, and (3)
   source-based controls are required along with router-based control.

   In the first of the more specific talks, Isidro Castineyra (BBN
   Communications Corporation) presented a back-of-the-envelope
   calculation on the effect of cell drops on end-to-end throughput.
   While at extremely low drop rates the retransmission strategies of
   go-back-n and selective retransmission produced similar end-to-end
   throughput, at higher drop rates selective retransmission achieved
   much higher throughput.  Next, Tony DeSimone (AT&T) told us why
   high-speed networks are not just fast low-speed networks.   If the
   buffer/window ratio is fixed, the drop rate decreases as the network
   speed increases.  Also, data was presented which showed that adaptive
   rate control can greatly decrease buffer utilization.  Jamal
   Golestani (Bellcore) then presented his work on stop-and-go queueing.
   This is a simple stalling algorithm implemented at the switches which
   guarantees no dropped packets and greatly reduces delay jitter.  The
   algorithm requires prior bandwidth reservation and some flow control
   on sources, and is compatible with basic FIFO queues.  In the last
   talk, Victor Frost (University of Kansas) discussed the impact of
   different dropping policies on the perceived quality of a voice
   connection.  When the source marks the drop priority of cells and the
   switch drops low priority cells first, the perceived quality of the
   connection is much higher than when cells are dropped randomly.

Session 8: Switch Architectures (Dave Sincoskie, Chair)

   Dave Mills (University of Delaware) presented work on a project now
   under way at the University of Delaware to study architectures and
   protocols for a high-speed network and packet switch capable of
   operation to the gigabit regime over distances spanning the country.
   It is intended for applications involving very large, very fast, very
   bursty traffic typical of supercomputing, remote sensing, and
   visualizing applications.  The network is assumed to be composed of
   fiber trunks, while the switch architecture is based on a VLSI
   baseband crossbar design which can be configured for speeds from 25
   Mbps to 1 Gbps.

   Mills' approach involves an externally switched architecture in which
   the timing and routing of flows between crossbar switches are
   determined by sequencing tables and counters in high-speed memory

Partridge                                                      [Page 14]

RFC 1152                  IRSG Workshop Report                April 1990

   local to each crossbar.  The switch program is driven by a
   reservation-TDMA protocol and distributed scheduling algorithm
   running in a co-located, general-purpose processor.  The end-to-end
   customers are free to use any protocol or data format consistent with
   the timing of the network.  His primary interest in the initial
   phases of the project is the study of appropriate reservation and
   scheduling algorithms.  He expect these algorithms to have much in
   common with the PODA algorithm used in the SATNET and WIDEBAND
   satellite systems and to the algorithms being considered for the
   Multiple Satellite System (MSS).

   John Robinson (JR, BBN Systems and Technologies) gave a talk called
   Beyond the Butterfly, which described work on a design for an ATM
   cell switch, known as MONET.  The talk described strategies for
   buffering at the input and output interfaces to a switch fabric
   (crossbar or butterfly).  The main idea was that cells should be
   introduced to the switch fabric in random sequence and to random
   fabric entry ports to avoid persistent traffic patterns having high
   cell loss in the switch fabric, where losses arise due to contention
   at output ports or within the switch fabric (in the case of a
   butterfly).  Next, the relationship of this work to an earlier design
   for a large-scale parallel processor, the Monarch, was described.  In
   closing, JR offered the claim that this class of switch is realizable
   in current technology (barely) for operation over SONET OC-48 2.4
   Gbps links.

   Dave Sincoskie (Bellcore) reported on two topics: recent switch
   construction at Bellcore, and high-speed processing of ATM cells
   carrying VC or DG information.  Recent switch design has resulted in
   a switch architecture named SUNSHINE, a Batcher-banyan switch which
   uses recirculation and multiple output banyans to resolve contention
   and increase throughput.  A paper on this switch will be published at
   ISS '90, and is available upon request from the author.  One of the
   interesting traffic results from simulations of SUNSHINE shows that
   per-port output queues of up to 1,000 cells (packets) may be
   necessary for bursty traffic patterns.  Also, Bill Marcus (at
   Bellcore) has recently produced Batcher-banyan (32x32) chips which
   test up to 170Mb/sec per port.

   The second point in this talk was that there is little difference in
   the switching processing of Virtual Circuit (VC) and Datagram (DG)
   traffic that which has been previously broken into ATM cells at the
   network edge.  The switch needs to do a header translation operation
   followed by some queueing (not necessarily FIFO).  The header
   translation of the VC and DG cells differs mainly in the memory
   organization of the address translation tables (dense vs. sparse).

   The discussion after the presentations seemed to wander off the topic

Partridge                                                      [Page 15]

RFC 1152                  IRSG Workshop Report                April 1990

   of switching, back to some of the source-routing vs. network routing
   issues discussed earlier in the day.

Session 9: Open Mike Night (Craig Partridge, Chair)

   As an experiment, the workshop held an open mike session during the
   evening of the second day.  Participants were invited to speak for up
   to five minutes on any subject of their choice.  Minutes of this
   session are sketchy because the chair found himself pre-occupied by
   keeping speakers roughly within their time limits.

   Charlie Catlett (NSCA) showed a film of the thunderstorm simulations
   he discussed earlier.

   Dave Cheriton (Stanford) made a controversial suggestion that perhaps
   one could manage congestion in the network simply by using a steep
   price curve, in which sending large amounts of data cost
   exponentially more than sending small amounts of data (thus leading
   people only to ask for large bandwidth when they needed it, and
   having them pay so much, that we can afford to give it to them).

   Guru Parulkar (Washington University, St. Louis) argued that the
   recent discussion on appropriateness of existing protocol and need
   for new protocols (protocol architecture) for gigabit networking
   lacks the right focus.  The emphasis of the discussion should be on
   what is the right functionality for gigabit speeds, which is simpler
   per packet processing, combination of rate and window based flow
   control, smart retransmission strategy, appropriate partitioning of
   work among host cpu+os, off board cpu, and custom hardware, and
   others.  It is not surprising that the existing protocols can be
   modified to include this functionality.  By the same token, it is not
   surprising that new protocols can be designed which take advantage of
   lessons of existing protocols and also include other features
   necessary for gigabit speeds.

   Raj Jain (DEC) suggested we look at new ways to measure protocol
   performance, suggesting our current metrics are insufficiently

   Dan Helman (UCSC) asked the group to consider, more carefully, who
   exactly the users of the network will be.  Large consumers? or many
   small consumers?

Partridge                                                      [Page 16]

RFC 1152                  IRSG Workshop Report                April 1990

Session 10: Miscellaneous Topics (Bob Braden, Chair)

   As its title implies, this session covered a variety of different
   topics relating to high-speed networking.

   Jim Kurose (University of Massachussetts) described his studies of
   scheduling and discard policies for real-time (constrained delay)
   traffic.  He showed that by enforcing local deadlines at switches
   along the path, it is possible to significantly reduce overall loss
   for such traffic.  Since his results depend upon the traffic model
   assumptions, he ended with a plea for work on traffic models, stating
   that Poisson models can sometimes lead to results that are wrong by
   many orders of magnitude.

   Nachum Shacham (SRI International) discussed the importance of error
   correction schemes that can recover lost cells, and as an example
   presented a simple scheme based upon longitudinal parity.  He also
   showed a variant, diagonal parity, which allows a single missing cell
   to be recreated and its position in the stream determined.

   Two talks concerned high-speed LANs.  Biswanath Muhkerjee (UC Davis)
   surveyed the various proposals for fair scheduling on unidirectional
   bus networks, especially those that are distance insensitive, i.e.,
   that can achieve 100% channel utilization independent of the bus
   length and data rate.  He described in particular his own scheme,
   which he calls p-i persistant.

   Howard Salwen (Proteon), speaking in place of Mehdi Massehi of IBM
   Zurich who was unable to attend, also discussed high-speed LAN
   technologies.  At 100 Mbps, a token ring has a clear advantage, but
   at 1 Gbps, the speed of light kills 802.6, for example.  He briefly
   described Massehi's reservation-based scheme, CRMA (Cyclic-
   Reservation Multiple-Access).

   Finally, Yechiam Yemeni (YY, Columbia University) discussed his work
   on a protocol silicon compiler.  In order to exploit the potential
   parallelism, he is planning to use one processor per connection.

   The session closed with a spirited discussion of about the relative
   merits of building an experimental network versus simulating it.
   Proponents of simulation pointed out the high cost of building a
   prototype and limitation on the solution space imposed by a
   particular hardware realization.  Proponents of building suggested
   that artificial traffic can never explore the state space of a
   network as well as real traffic can, and that an experimental
   prototype is important for validating simulations.

Partridge                                                      [Page 17]

RFC 1152                  IRSG Workshop Report                April 1990

Session 11: Protocol Architectures (Vint Cerf, Chair)

   Nick Maxemchuk (AT&T Bell Labs) summarized the distinctions between
   circuit switching, virtual circuits, and datagrams.  Circuits are
   good for (nearly) constant rate sources.  Circuit switching dedicates
   resources for the entire period of service.  You have to set up the
   resource allocation before using it.  In a 1.7 Gbps network, a 3000-
   mile diameter consumes 10**7 bytes during the circuit set-up round-
   trip time, and potentially the same for circuit teardown.  Some
   service requirements (file transfer, facsimile transmission) are far
   smaller than the wasted 2*10**7 bytes these circuit management delays
   impose.  (Of course, these costs are not as dramatic if the allocated
   bandwidth is less than the maximum possible.)

   Virtual circuits allow shared use of bandwidth (multiplexing) when
   the primary source of traffic is idle (as in Voice Time Assigned
   Speech Interpolation).  The user notifies the network of planned

   Datagrams (DG) are appropriate when there is no prior knowledge of
   use statistics or usage is far less than the capacity wasted during
   circuit or virtual circuit set-up.  One can adaptively route traffic
   among equivalent resources.

   In gigabit ATMs, the high service speed and decreased cell size
   increases the relative burstiness of service requests.  All of these
   characteristics combine to make DG service very attractive.

   Maxemchuk then described a deflection routing notion in which traffic
   would be broken into units of fixed length and allowed into the
   network when capacity was available and routed out by any available
   channel, with preference being given to the channel on the better
   path.  This idea is similar to the hot potato routing of Paul Baran's
   1964 packet switching design.  With buffering (one buffer), Maxemchuk
   achieved a theoretical 90% utilization.  Large reassembly buffers
   provide for better throughput.

   Maxemchuk did not have an answer to the question: how do you make
   sure empty "slots" are available where needed? This is rather like
   the problem encountered by D. Davies at the UK National Physical
   Laboratory in his isarythmic network design in which a finite number
   of crates are available for data transport throughout the network.

   Guru Parulkar (Washington University, St. Louis) presented a broad
   view of an Internet architecture in which some portion of the system
   would operate at gigabit speeds.  In his model, internet, transport,
   and application protocols would operate end to end.  The internet
   functions would be reflected in gateways and in the host/net

Partridge                                                      [Page 18]

RFC 1152                  IRSG Workshop Report                April 1990

   interface, as they are in the current Internet.  However, the
   internet would support a new type of service called a congram which
   aims at combining strengths of both soft connection and datagram.

   In this architecture, a variable grade of service would be provided.
   Users could request congrams (UCON) or the system could set them up
   internally (Picons) to avoid end-to-end setup latency.  The various
   grades of service could be requested, conceptually, by asserting
   various required (desired) levels of error control, throughput,
   delay, interarrival jitter, and so on.  Gateways based on ATM
   switches, for example, would use packet processors at entry/exit to
   do internet specific per packet processing, which may include
   fragmentation and reassembly of packets (into and out of ATM cells).

   At the transport level, Parulkar argued for protocols which can
   provide application-oriented flow and error control with simple per
   packet processing.  He also mentioned the notion of a generalized RPC
   (GRPC) in which code, data, and execution might be variously local or
   remote from the procedure initiator.  GRPC can be implemented using
   network level virtual storage mechanisms.

   The basic premise of Raj Yavatkar's presentation (University of
   Kentucky) was that processes requiring communication service would
   specify their needs in terms of peak and average data rate as well as
   defining burst parameters (frequency and size).  Bandwidth for a
   given flow would be allocated at the effective data rate that is
   computed on the basis of flow parameters.  The effective data rate
   lies somewhere between the peak and average data rate based on the
   burst parameters.  Statistical multiplexing would take up the gap
   between peak and effective rate when a sudden burst of traffic
   arrives.  Bounds on packet loss rate can be computed for a given set
   of flow parameters and corresponding effective data rate.

   This presentation led to a discussion about deliberate disciplining
   of inter-process communication demands to match the requested flow
   (service) profile.  This point was made in response to the
   observation that we often have little information about program
   behavior and might have trouble estimating the network service
   requirements of any particular program.

Architectural Discussion

   An attempt was made to conduct a high-level discussion on various
   architectural questions.  The discussion yielded a variety of

      1.  The Internet would continue to exist in a form similar
          to its current incarnation, and gateways would be required,

Partridge                                                      [Page 19]

RFC 1152                  IRSG Workshop Report                April 1990

          at least to interface the existing facilities to the high
          speed packet switching environment.

      2.  Strong interest was expressed by some participants in access
          to raw (naked ATM) services.  This would permit users
          to construct their own gigabit nets, at the IP level, at any
          rate.  The extreme view of this was taken by David Cheriton
          who would prefer to have control over routing decisions and
          other behavior of the ATM network.

      3.  The speed of light problem (latency, round-trip delay)
          is not going to go away and will have serious impact on
          control of the system.  The optimistic view was taken,
          for example, by Craig Partridge and Van Jacobson, who felt
          that many of the existing network and communications
          management mechanisms used in the present Internet protocols
          would suffice, if suitably implemented, at higher speeds.
          A less rosy view was taken by David Clark who observed
          (as did others) that many transactions would be serviced in
          much less than one round-trip time, so that any end-to-end
          controls would be largely useless.

      4.  For applications requiring fixed, periodic service,
          reservation of resource seemed reasonably attractive to many
          participants, as long as the service period dominated the
          set-up time (round-trip delay) by an appreciable

      5.  There was much discussion throughout the workshop of
          congestion control and flow control.  Although these
          problems were not new, they took on somewhat newer
          character in the presence of much higher round-trip delays
          (measured in bits outstanding).  One view is that end-to-end
          flow control is needed, in any case, to moderate sources
          sending to limited bandwidth receivers.  End-to-end flow
          control may not, however, be sufficient to protect the
          interior of the network from congestion problems, so
          additional, intra-network means are needed to cope with
          congestion hot spots.   Eventually such conditions
          have to be reflected to the periphery of the network to
          moderate traffic sources.

      6.  There was disagreement on the build or simulate
           question.  One view was in favor of building network
          components so as to collect and understand live application
          data.  Another view held that without some careful
          simulation, one might have little idea what to build
          (for example, Sincoskie's large buffer pool requirement was

Partridge                                                      [Page 20]

RFC 1152                  IRSG Workshop Report                April 1990

          not apparent until the system was simulated).

Comments from Workshop Evaluation Forms

   At the end of the IRSG workshop, we asked attendees to fill out an
   evaluation form.  Of the fifty-one attendees, twenty-nine (56%)
   turned in a form.

   The evaluation form asked attendees to answer two questions:

      #1.  Do you feel that having attended this workshop will help you
           in your work on high speed networks during the next year?

      #2.  What new ideas, questions, or issues, did you feel were
           brought up in the workshop?

   In this section we discuss the answers we got to both questions.

Question #1

   There was a satisfying unanimity of opinion on question #1.  Twenty-
   four attendees answered yes, often strongly (e.g., Absolutely and
   very much so).  Of the remaining five respondents, three said they
   expected it to have some effect on their research and only two said
   the workshop would have little or no effect.

   Some forms had some additional notes about why the workshop helped
   them.  Several people mentioned that there was considerable benefit
   to simply meeting and talking with people they hadn't met before.  A
   few other people noted that the workshop had broadened their
   perspective, or improved their understanding of certain issues.  A
   couple of people noted that they'd heard ideas they thought they
   could use immediately in their research.

Question #2

   Almost everyone listed ideas they'd seen presented at the conference
   which were new to them.

   It is clear that which new ideas were important was a matter of
   perspective - the workshop membership was chosen to represent a broad
   spectrum of specialties, and people in different specialities were
   intrigued by different ideas.  However, there were some general
   themes raised in many questionnaires:

      (1)  Limitations of our traffic models.  This particular subject
           was mentioned, in some form, on many forms.  The attendees

Partridge                                                      [Page 21]

RFC 1152                  IRSG Workshop Report                April 1990

           generally felt we didn't understand how network traffic would
           behave on a gigabit network, and were concerned that people
           might design (or worse, standardize) network protocols for
           high speed networks that would prove inadequate when used
           with real traffic.  Questions were raised about closed-loop
           vs. open-loop traffic models and the effects of varying types
           of service.  This concern led several people to encourage the
           construction of a high-speed testbed, so we can actually see
           some real traffic.

      (2)  Congestion control.  Despite the limitations of our traffic
           models, respondents felt that congestion control at both
           switching elements and network wide was going to be even more
           important than today, due to the wider mix of traffic that
           will appear on gigabit networks.  Most forms mentioned at
           least one of the congestion control talks as a containing a
           new idea.  The talks by Victor Frost, Jamal Golestani and
           Scott Shenker received the most praise.  Some attendees were
           also interested in methods for keeping the lower-layer
           switching fabric from getting congested and mentioned the
           talks by Robinson and Maxemchuk as of interest.

      (3)  Effects of fixed delay.  While the reviews were by no means
           unanimous, many people had come to the conclusion that the
           most serious problem in gigabit networking was not bandwidth,
           but delay.  The workshop looked at this issue in several
           guises, and most people listed at least one aspect of fixed
           delay as a challenging new problem.  Questions that people
           mentioned include:

    -    How to avoid a one round-trip set up delay, for less than one
         round-trip time's worth of data?

    -    How to recover from error without retransmission (and thus
         additional network delays)?  Several people were intrigued by
         Nachum Shacham's work on error detection and recovery.

    -    Should we use window flow-control or rate-based flow control
         when delays were long?

    -    Can we modify the idea of remote procedure calls to deal with
         the fact that delays are relatively long?

A couple of attendees noted that while some of these problems looked
similar to those of today, the subtle differences caused by operating a
network at gigabit speeds led them to believe the actual approaches to
solving these problems would have to be very different from those of

Partridge                                                      [Page 22]

RFC 1152                  IRSG Workshop Report                April 1990


Security Considerations

   Security issues are not discussed in this memo.

Author's Address

   Craig Partridge
   Bolt Beranek and Newman Inc.
   50 Moulton Street
   Cambridge, MA 02138

   Phone: (617) 873-2459

   EMail: craig@BBN.COM

Partridge                                                      [Page 23]