module ietf-ssh-common {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-ssh-common";
prefix sshcmn;
organization
"IETF NETCONF (Network Configuration) Working Group";
contact
"WG Web:
WG List:
Author: Kent Watsen
Author: Gary Wu ";
description
"This module defines a common features, identities, and
groupings for Secure Shell (SSH).
Copyright (c) 2019 IETF Trust and the persons identified
as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with
or without modification, is permitted pursuant to, and
subject to the license terms contained in, the Simplified
BSD License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX
(https://www.rfc-editor.org/info/rfcXXXX); see the RFC
itself for full legal notices.;
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
are to be interpreted as described in BCP 14 (RFC 2119)
(RFC 8174) when, and only when, they appear in all
capitals, as shown here.";
revision 2019-10-18 {
description
"Initial version";
reference
"RFC XXXX: YANG Groupings for SSH Clients and SSH Servers";
}
// Features
feature ssh-ecc {
description
"Elliptic Curve Cryptography is supported for SSH.";
reference
"RFC 5656: Elliptic Curve Algorithm Integration in the
Secure Shell Transport Layer";
}
feature ssh-x509-certs {
description
"X.509v3 certificates are supported for SSH per RFC 6187.";
reference
"RFC 6187: X.509v3 Certificates for Secure Shell
Authentication";
}
feature ssh-dh-group-exchange {
description
"Diffie-Hellman Group Exchange is supported for SSH.";
reference
"RFC 4419: Diffie-Hellman Group Exchange for the
Secure Shell (SSH) Transport Layer Protocol";
}
feature ssh-ctr {
description
"SDCTR encryption mode is supported for SSH.";
reference
"RFC 4344: The Secure Shell (SSH) Transport Layer
Encryption Modes";
}
feature ssh-sha2 {
description
"The SHA2 family of cryptographic hash functions is
supported for SSH.";
reference
"FIPS PUB 180-4: Secure Hash Standard (SHS)";
}
// Identities
identity public-key-alg-base {
description
"Base identity used to identify public key algorithms.";
}
identity ssh-dss {
base public-key-alg-base;
description
"Digital Signature Algorithm using SHA-1 as the
hashing algorithm.";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
identity ssh-rsa {
base public-key-alg-base;
description
"RSASSA-PKCS1-v1_5 signature scheme using SHA-1 as the
hashing algorithm.";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
identity ecdsa-sha2-nistp256 {
base public-key-alg-base;
if-feature "ssh-ecc and ssh-sha2";
description
"Elliptic Curve Digital Signature Algorithm (ECDSA) using the
nistp256 curve and the SHA2 family of hashing algorithms.";
reference
"RFC 5656: Elliptic Curve Algorithm Integration in the
Secure Shell Transport Layer";
}
identity ecdsa-sha2-nistp384 {
base public-key-alg-base;
if-feature "ssh-ecc and ssh-sha2";
description
"Elliptic Curve Digital Signature Algorithm (ECDSA) using the
nistp384 curve and the SHA2 family of hashing algorithms.";
reference
"RFC 5656: Elliptic Curve Algorithm Integration in the
Secure Shell Transport Layer";
}
identity ecdsa-sha2-nistp521 {
base public-key-alg-base;
if-feature "ssh-ecc and ssh-sha2";
description
"Elliptic Curve Digital Signature Algorithm (ECDSA) using the
nistp521 curve and the SHA2 family of hashing algorithms.";
reference
"RFC 5656: Elliptic Curve Algorithm Integration in the
Secure Shell Transport Layer";
}
identity x509v3-ssh-rsa {
base public-key-alg-base;
if-feature "ssh-x509-certs";
description
"RSASSA-PKCS1-v1_5 signature scheme using a public key stored
in an X.509v3 certificate and using SHA-1 as the hashing
algorithm.";
reference
"RFC 6187: X.509v3 Certificates for Secure Shell
Authentication";
}
identity x509v3-rsa2048-sha256 {
base public-key-alg-base;
if-feature "ssh-x509-certs and ssh-sha2";
description
"RSASSA-PKCS1-v1_5 signature scheme using a public key stored
in an X.509v3 certificate and using SHA-256 as the hashing
algorithm. RSA keys conveyed using this format MUST have a
modulus of at least 2048 bits.";
reference
"RFC 6187: X.509v3 Certificates for Secure Shell
Authentication";
}
identity x509v3-ecdsa-sha2-nistp256 {
base public-key-alg-base;
if-feature "ssh-ecc and ssh-x509-certs and ssh-sha2";
description
"Elliptic Curve Digital Signature Algorithm (ECDSA)
using the nistp256 curve with a public key stored in
an X.509v3 certificate and using the SHA2 family of
hashing algorithms.";
reference
"RFC 6187: X.509v3 Certificates for Secure Shell
Authentication";
}
identity x509v3-ecdsa-sha2-nistp384 {
base public-key-alg-base;
if-feature "ssh-ecc and ssh-x509-certs and ssh-sha2";
description
"Elliptic Curve Digital Signature Algorithm (ECDSA)
using the nistp384 curve with a public key stored in
an X.509v3 certificate and using the SHA2 family of
hashing algorithms.";
reference
"RFC 6187: X.509v3 Certificates for Secure Shell
Authentication";
}
identity x509v3-ecdsa-sha2-nistp521 {
base public-key-alg-base;
if-feature "ssh-ecc and ssh-x509-certs and ssh-sha2";
description
"Elliptic Curve Digital Signature Algorithm (ECDSA)
using the nistp521 curve with a public key stored in
an X.509v3 certificate and using the SHA2 family of
hashing algorithms.";
reference
"RFC 6187: X.509v3 Certificates for Secure Shell
Authentication";
}
identity key-exchange-alg-base {
description
"Base identity used to identify key exchange algorithms.";
}
identity diffie-hellman-group14-sha1 {
base key-exchange-alg-base;
description
"Diffie-Hellman key exchange with SHA-1 as HASH and
Oakley Group 14 (2048-bit MODP Group).";
reference
"RFC 4253: The Secure Shell (SSH) Transport Layer Protocol";
}
identity diffie-hellman-group-exchange-sha1 {
base key-exchange-alg-base;
if-feature "ssh-dh-group-exchange";
description
"Diffie-Hellman Group and Key Exchange with SHA-1 as HASH.";
reference
"RFC 4419: Diffie-Hellman Group Exchange for the
Secure Shell (SSH) Transport Layer Protocol";
}
identity diffie-hellman-group-exchange-sha256 {
base key-exchange-alg-base;
if-feature "ssh-dh-group-exchange and ssh-sha2";
description
"Diffie-Hellman Group and Key Exchange with SHA-256 as HASH.";
reference
"RFC 4419: Diffie-Hellman Group Exchange for the
Secure Shell (SSH) Transport Layer Protocol";
}
identity ecdh-sha2-nistp256 {
base key-exchange-alg-base;
if-feature "ssh-ecc and ssh-sha2";
description
"Elliptic Curve Diffie-Hellman (ECDH) key exchange using the
nistp256 curve and the SHA2 family of hashing algorithms.";
reference
"RFC 5656: Elliptic Curve Algorithm Integration in the
Secure Shell Transport Layer";
}
identity ecdh-sha2-nistp384 {
base key-exchange-alg-base;
if-feature "ssh-ecc and ssh-sha2";
description
"Elliptic Curve Diffie-Hellman (ECDH) key exchange using the
nistp384 curve and the SHA2 family of hashing algorithms.";
reference
"RFC 5656: Elliptic Curve Algorithm Integration in the
Secure Shell Transport Layer";
}
identity ecdh-sha2-nistp521 {
base key-exchange-alg-base;
if-feature "ssh-ecc and ssh-sha2";
description
"Elliptic Curve Diffie-Hellman (ECDH) key exchange using the
nistp521 curve and the SHA2 family of hashing algorithms.";
reference
"RFC 5656: Elliptic Curve Algorithm Integration in the
Secure Shell Transport Layer";
}
identity encryption-alg-base {
description
"Base identity used to identify encryption algorithms.";
}
identity triple-des-cbc {
base encryption-alg-base;
description
"Three-key 3DES in CBC mode.";
reference
"RFC 4253: The Secure Shell (SSH) Transport Layer Protocol";
}
identity aes128-cbc {
base encryption-alg-base;
description
"AES in CBC mode, with a 128-bit key.";
reference
"RFC 4253: The Secure Shell (SSH) Transport Layer Protocol";
}
identity aes192-cbc {
base encryption-alg-base;
description
"AES in CBC mode, with a 192-bit key.";
reference
"RFC 4253: The Secure Shell (SSH) Transport Layer Protocol";
}
identity aes256-cbc {
base encryption-alg-base;
description
"AES in CBC mode, with a 256-bit key.";
reference
"RFC 4253: The Secure Shell (SSH) Transport Layer Protocol";
}
identity aes128-ctr {
base encryption-alg-base;
if-feature "ssh-ctr";
description
"AES in SDCTR mode, with 128-bit key.";
reference
"RFC 4344: The Secure Shell (SSH) Transport Layer Encryption
Modes";
}
identity aes192-ctr {
base encryption-alg-base;
if-feature "ssh-ctr";
description
"AES in SDCTR mode, with 192-bit key.";
reference
"RFC 4344: The Secure Shell (SSH) Transport Layer Encryption
Modes";
}
identity aes256-ctr {
base encryption-alg-base;
if-feature "ssh-ctr";
description
"AES in SDCTR mode, with 256-bit key.";
reference
"RFC 4344: The Secure Shell (SSH) Transport Layer Encryption
Modes";
}
identity mac-alg-base {
description
"Base identity used to identify message authentication
code (MAC) algorithms.";
}
identity hmac-sha1 {
base mac-alg-base;
description
"HMAC-SHA1";
reference
"RFC 4253: The Secure Shell (SSH) Transport Layer Protocol";
}
identity hmac-sha2-256 {
base mac-alg-base;
if-feature "ssh-sha2";
description
"HMAC-SHA2-256";
reference
"RFC 6668: SHA-2 Data Integrity Verification for the
Secure Shell (SSH) Transport Layer Protocol";
}
identity hmac-sha2-512 {
base mac-alg-base;
if-feature "ssh-sha2";
description
"HMAC-SHA2-512";
reference
"RFC 6668: SHA-2 Data Integrity Verification for the
Secure Shell (SSH) Transport Layer Protocol";
}
// Groupings
grouping transport-params-grouping {
description
"A reusable grouping for SSH transport parameters.";
reference
"RFC 4253: The Secure Shell (SSH) Transport Layer Protocol";
container host-key {
description
"Parameters regarding host key.";
leaf-list host-key-alg {
type identityref {
base public-key-alg-base;
}
ordered-by user;
description
"Acceptable host key algorithms in order of descending
preference. The configured host key algorithms should
be compatible with the algorithm used by the configured
private key. Please see Section 5 of RFC XXXX for
valid combinations.
If this leaf-list is not configured (has zero elements)
the acceptable host key algorithms are implementation-
defined.";
reference
"RFC XXXX: YANG Groupings for SSH Clients and SSH Servers";
}
}
container key-exchange {
description
"Parameters regarding key exchange.";
leaf-list key-exchange-alg {
type identityref {
base key-exchange-alg-base;
}
ordered-by user;
description
"Acceptable key exchange algorithms in order of descending
preference.
If this leaf-list is not configured (has zero elements)
the acceptable key exchange algorithms are implementation
defined.";
}
}
container encryption {
description
"Parameters regarding encryption.";
leaf-list encryption-alg {
type identityref {
base encryption-alg-base;
}
ordered-by user;
description
"Acceptable encryption algorithms in order of descending
preference.
If this leaf-list is not configured (has zero elements)
the acceptable encryption algorithms are implementation
defined.";
}
}
container mac {
description
"Parameters regarding message authentication code (MAC).";
leaf-list mac-alg {
type identityref {
base mac-alg-base;
}
ordered-by user;
description
"Acceptable MAC algorithms in order of descending
preference.
If this leaf-list is not configured (has zero elements)
the acceptable MAC algorithms are implementation-
defined.";
}
}
}
}