This Working Group Did Not Meet.
NOTE: This charter is a snapshot of the 40th IETF Meeting in Washington, DC. It may now be out-of-date. Last Modified: 16-Dec-97
Chair(s):
G. Malkin <gmalkin@baynetworks.com>
Routing Area Director(s):
Joel Halpern <jhalpern@newbridge.com>
Routing Area Advisor:
Joel Halpern <jhalpern@newbridge.com>
Mailing Lists:
General Discussion:ietf-rip@baynetworks.com
To Subscribe: ietf-rip-request@baynetworks.com
In Body: subscribe ietf-rip <your email address>
Archive: ftp://xylogics.com/pub/users/gmalkin/rip/rip-arc
Description of Working Group:
The RIP Working Group was formed from the RIP Version 2 Working Group, which was originally chartered to create the RIP-2 standard. Since several other RIP-related efforts are also occurring within the IETF, it was decided to create a single working group to handle them all.
The RIP Working Group is chartered to guide the following proposals and develop the following projects through the IETF standards track:
- ``RIP Version 2'' (RFC 1723)
- ``RIP Version 2 MIB Extension'' (RFC 1724)
- ``Extensions to RIP to Support Demand Circuits'' (RFC 1582)
- ``RIP-II Cryptographic Authentication'' (Internet-Draft)
Additionally, the RIP Working Group will handle the RIPng protocol which, in its first incarnation, will contain the minimum modifications to RIP-2 necessary to handle IPng.
Goals and Milestones:
Done |
|
Submit RIPng as an Internet-Draft. |
Done |
|
Submit Internet-Draft of MD5 Proposal. |
Done |
|
Meet at San Jose IETF to discuss MD5 document. |
Done |
|
Submit MD5 document to IESG for consideration as a Proposed Standard. |
Done |
|
Meet at Danvers IETF to discuss implementation of all RIP-related specifications. |
Done |
|
Submit Demand Circuit RIP document (RFC 1581) to IESG for consideration as a Draft Standard. |
Done |
|
Submit RIPng Internet-Draft for consideration as a Proposed Standard. Submission MUST be accompanied by a suitably restrictive Applicability Statement. |
Done |
|
Meet at Stockholm IETF. Review status of MD5 for elevation to Draft Standard. Review status of RIP-2 and MIB for elevation to Standard. A suitably restrictive Applicability Statement for RIP-2 MUST accompany the request for standards level elevation. |
Apr 97 |
|
Submit the RIP2 protocol and MIN to the IESG for Standard. Group will then go into hiatus waiting for other documents to spend the necessary periods of time at their current standards level prior to elevation in the standards track. |
Internet-Drafts:
· RIP Version 2 MIB Extension
· RIPv2 Domain Of Interpretation (DOI) for ISAKMP
Request For Comments:
RFC |
Status |
Title |
RFC1923 |
RIPv1 Applicability Statement for Historic Status | |
RFC2081 |
RIPng Protocol Applicability Statement | |
RFC2080 |
PS |
RIPng for IPv6 |
RFC2091 |
PS |
Triggered Extensions to RIP to Support Demand Circuits |
RFC2092 |
Protocol Analysis for Triggered RIP |