Network Working Group Hirosi Maruyama INTERNET-DRAFT Kent Tamura February 1999 Naohiko Uramoto Expires: August 1999 IBM Digest Values for DOM (DOMHASH) ------ ------ --- --- --------- Hiroshi Maruyama Kent Tamura Naohiko Uramoto Status of This Document This draft, file name draft-hiroshi-dom-hash-01.txt, is intended to be become a Proposed Standard RFC. Distribution of this document is unlimited. Comments should be sent to the xml-dsig mailing list or to the authors. This document is an Internet-Draft and is in full conformance with all provisions of Section 10 of RFC2026. Internet drafts are working documents of the Internet Engineering Task Force (IETF), its areas and its working groups. Note that other groups may also distribute working information as Internet drafts. Internet Drafts are draft documents valid for a maximum of six months and can be updated, replaced or obsoleted by other documents at any time. It is inappropriate to use Internet drafts as reference material or to cite them as other than as "work in progress". To learn the current status of any Internet draft please check the "lid-abstracts.txt" listing contained in the Internet drafts shadow directories on ftp.is.co.za (Africa), nic.nordu.net (Europe), munnari.oz.au (Pacific Rim), ftp.ietf.org (US East coast) or ftp.isi.edu (US West coast). Further information about the IETF can be found at URL: http://www.ietf.org/ H. Maruyama, K. Tamura, & N. Uramoto [Page 1] INTERNET-DRAFT DOMHASH February 1999 Abstract This internet draft defines a clear and unambiguous definition of digest (hash) values of the XML objects regardless of the surface string variation of XML. This definition can be used for XML digital signature as well efficient replication of XML objects. H. Maruyama, K. Tamura, & N. Uramoto [Page 2] INTERNET-DRAFT DOMHASH February 1999 Table of Contents Status of This Document....................................1 Abstract...................................................2 Table of Contents..........................................3 1. Introduction............................................4 2. Digest Calculation......................................5 2.1. Overview..............................................5 2.2. Namespace Considerations..............................6 2.3. Definition with Code Fragments........................7 2.3.1. Text Nodes..........................................7 2.3.2. ProcessingInstruction Nodes.........................8 2.3.3. Attr Nodes..........................................8 2.3.4. Element Nodes.......................................9 3. Suggested API..........................................10 4. Discussion.............................................11 5. Security Considerations................................12 References................................................13 Author's Address..........................................14 Expiration and File Name..................................14 H. Maruyama, K. Tamura, & N. Uramoto [Page 3] INTERNET-DRAFT DOMHASH February 1999 1. Introduction The purpose of this document is to give a clear and unambiguous definition of digest (hash) values of the XML objects [XML]. In addition, we propose to add a new API getDigest() to the interface Node that returns a digest value, a fixed length value (normally 128 bits or 160 bits) representing an entire subtree. Two subtrees are considered identical if their hash values are the same, and different if their hash values are different. There are at least two usage scenarios of DOMHASH. One is as a basis for digital signatures for XML. Digital signature algorithms normally require hashing a signed content before signing. DOMHASH provides a concrete definition of the hash value calculation. The other is to use DOMHASH when synchronizing two DOM structures [DOM]. Suppose that a server program generates a DOM structure which is to be rendered by clients. If the server makes frequent small changes on a large DOM tree, it is desirable that only the modified parts are sent over to the client. A client can initiate a request by sending the root hash value of the structure in the cache memory. If it matches with the root hash value of the current server structure, nothing needs be sent. If not, then the server compares the client hash with the older versions in the server's cache. If it finds one that matches the client's version of the structure, then it locates differences with the current version by recursively comparing the hash values of each node. This way, the client can receive only an updated portion of a large structure without requesting the whole thing. One way of defining digest values is to take a surface string as the input for a digest algorithm. However, this approach has several drawbacks. The same internal DOM structure may be represented in may different ways as surface strings even if they strictly conform to the XML specification. Treatment of white spaces, selection of character encodings, entity references (i.e., use of ampersands), and so on have impact on the generation of a surface string. If the implementations of surface string generation are different, the hash values would be different, resulting in unvalidatable digital signatures and unsuccessful detection of identical DOM structures. Therefore, it is desirable that digest of DOM is defined in the DOM terms -- that is, as an unambiguous algorithm operating on a DOM tree. This is the approach we take in this specification. Introduction of namespace is another source of variation of surface string because different namespace prefixes can be used for representing the same namespace URI [URI]. In the following example, the namespace prefix "edi" is bound to the URI "http://ecommerce.org/schema" but this prefix can be arbitrary chosen without changing the logical contents as shown in the second example. H. Maruyama, K. Tamura, & N. Uramoto [Page 4] INTERNET-DRAFT DOMHASH February 1999 : : The DOMHash defined in this document is designed so that the choice of the namespace prefix does not affect the digest value. In the above example, both the "root" elements will get the same digest value. 2. Digest Calculation 2.1. Overview Hash values are defined on the DOM type Node. We consider the following four node types that are used for representing a DOM document structure: 1. Element 2. Attr 3. ProcessingInstruction 4. Text Comment nodes and Document Type Definitions (DTDs) do not participate in the digest value calculation. This is because DOM does not require a conformant processor to create data structures for these. DOMHash is designed so that it can be computed with any XML processor conformant to the DOM or SAX [SAX] specification. The digest values are defined recursively on each level of the DOM tree so that only a relavant part needs to be recalculated when a small portion of the tree is changed. Below, we give the precise definitions of digest for these types. We describe the format of the data to be supplied to a hash algorithm using a figure and a simple description, followed by a Java code H. Maruyama, K. Tamura, & N. Uramoto [Page 5] INTERNET-DRAFT DOMHASH February 1999 fragment using the DOM API and the JDK 1.1 Platform Core API only. Therefore, the semantics should be unambiguous. As the rule of thumb, all strings are to be in UTF-16 in the network byte order (Big Endian) with no byte order mark. If there is a sequence of text nodes without any element nodes inbetween, these text nodes are merged into one by concatenating them. A zero-length text node is always ignored. 2.2. Namespace Considerations To avoid the dependence on the namespace prefix, we use "expanded names" to do digest calculation. If an element name or an attribute name is qualified either by a explicit namespace prefix or by a default namespace, the name's LocalPart is prepended by the URI of the namespace (the namespace name as defined in the NameSpace specification [NAM]) and a colon before digest calculation. In the following example, the default qualified name "order" is expanded into "http://ecommerce.org/schema:order" while the explicit qualified name "book:title" is exapanded into "urn:loc.gov:books:title" before digest calculation. ... : We define an expanded name (either for element or attirbute) as follows: If a name is not qualified, the exapanded name is the name itself. If a name is qualified with the prefix "xmlns", the expanded name is undefined. If a name is qualified either by default or by an explicit namespace prefix, the expanded name is URI bound to the namespace + ":" + LocalPart In the following example code, we assume that the getExpandedName() method (which returns the expanded name as defined above) is defined in both Element and Attr interfaces of DOM. H. Maruyama, K. Tamura, & N. Uramoto [Page 6] INTERNET-DRAFT DOMHASH February 1999 Note that the digest values are not defined on namespace declarations. In other words, the digest value is not defined for an attribute when - the attribute name is "xmlns", or - the namespace prefix is "xmlns". In the above example, the two attributes which are namespace declarations do not have digest values and therefore will not participate in the calculation of the digest value of the "root" element. 2.3. Definition with Code Fragments The code fragments in the definitions below assume that they are in implementation classes of Node. Therefore, a methods call without an explicit object reference is for the Node itself. For example, getData() returns the text data of the current node if it is a Text node. The parameter digestAlgorithm is to be replaced by an identifier of the digest algorithm, such as "MD5" [MD5] and "SHA-1". The computation should begin with a four byte integer that represents the type of the node, such as Node.TEXT_NODE or Node.ELEMENT_NODE. 2.3.1. Text Nodes The hash value of a Text node is computed on the four byte header followed by the UTF-16 encoded text string. - Node.TEXT_NODE (3) in 32 bit network-byte-ordered integer - Text data in UTF-16 stream (variable length) public byte[] getDigest(String digestAlgorithm) { MessageDigest md = MessageDigest.getInstance(digestAlgorithm); md.update((byte)((Node.TEXT_NODE >> 24) & 0xff)); md.update((byte)((Node.TEXT_NODE >> 16) & 0xff)); md.update((byte)((Node.TEXT_NODE >> 8) & 0xff)); md.update((byte)(Node.TEXT_NODE & 0xff)); md.update(getData().getBytes("UnicodeBigUnmarked")); return md.digest(); } Here, MessageDigest is in the package java.security.*, one of the built-in packages of JDK 1.1. H. Maruyama, K. Tamura, & N. Uramoto [Page 7] INTERNET-DRAFT DOMHASH February 1999 2.3.2. ProcessingInstruction Nodes A ProcessingIinstruction (PI) node has two components: the target and the data. Accordingly, the hash is computed on the concatenation of both, separated by 'x0000'. PI data is from the first non white space character after the target to the character immediately preceding the "?>". - Node.PROCESSING_INSTRUCTION_NODE (7) in 32 bit network-byte-ordered integer - PI target in UTF-16 stream (variable length) - 0x00 0x00 - PI data in UTF-16 stream (variable length) public byte[] getDigest(String digestAlgorithm) { MessageDigest md = MessageDigest.getInstance(digestAlgorithm); md.update((byte)((Node.PROCESSING_INSTRUCTION_NODE >> 24) & 0xff)); md.update((byte)((Node.PROCESSING_INSTRUCTION_NODE >> 16) & 0xff)); md.update((byte)((Node.PROCESSING_INSTRUCTION_NODE >> 8) & 0xff)); md.update((byte)(Node.PROCESSING_INSTRUCTION_NODE & 0xff)); md.update(getName().getBytes("UnicodeBigUnmarked")); md.update((byte)0); md.update((byte)0); md.update(getData().getBytes("UnicodeBigUnmarked")); return md.digest(); } 2.3.3. Attr Nodes The digest value of Attr nodes are defined similarly to PI nodes, except that we need a separator between the expanded attribute name and the attribute value. The '0x0000' value in UTF-16 is allowed nowhere in an XML document, so it can serve as an unambiguous separator. The expanded name must be used as the attribute name because it may be qualified. Note that if the attribute is a namespace declaration (either the attribute name is "xmlns" or its prefix is "xmlns"), the digest value is undefined and the getDigest() method should return null. - Node.ATTRIBUTE_NODE (2) in 32 bit network-byte-ordered integer - Expanded attribute name in UTF-16 stream (variable length) - 0x00 0x00 - Attribute value in UTF-16 stream (variable length) H. Maruyama, K. Tamura, & N. Uramoto [Page 8] INTERNET-DRAFT DOMHASH February 1999 public byte[] getDigest(String digestAlgorithm) { if (getNodeName().equals("xmlns") || getNodeName().startsWith("xmlns:")) return null; MessageDigest md = MessageDigest.getInstance(digestAlgorithm); md.update((byte)((Node.ATTRIBUTE_NODE >> 24) & 0xff)); md.update((byte)((Node.ATTRIBUTE_NODE >> 16) & 0xff)); md.update((byte)((Node.ATTRIBUTE_NODE >> 8) & 0xff)); md.update((byte)(Node.ATTRIBUTE_NODE & 0xff)); md.update(getExpandedName().getBytes("UnicodeBigUnmarked")); md.update((byte)0); md.update((byte)0); md.update(getValue().getBytes("UnicodeBigUnmarked")); return md.digest(); } 2.3.4. Element Nodes Element nodes are the most complex because they consist of other nodes recursively. Hash values of these component nodes are used to calculate the node's digest so that we can save computation when the structure is partially changed. First, all the attributes except for namespace declarations must be collected. This list is sorted by the expanded attribute names. The sorting is done in ascending order in terms of the UTF-16 encoded expanded attribute names, using the string comparison operator defined as String#compareTo() in Java. The semantics of this sorting operation should be clear. - Node.ELEMENT_NODE (1) in 32 bit network-byte-ordered integer - Expanded element name in UTF-16 stream (variable length) - 0x00 0x00 - A number of non-namespace-declaration attributes in 32 bit network-byte-ordered unsigned integer - Sequence of digest values of non-namespace-declaration attributes, sorted by String#compareTo() for attribute names - A number of child nodes (except for Comment nodes) in 32bit network-byte-ordered unsigned integer - Sequence of digest values of each child node except for Comment nodes (variable length) (A sequence of child texts is merged to one text. A zero-length text and Comment nodes are not counted as child) H. Maruyama, K. Tamura, & N. Uramoto [Page 9] INTERNET-DRAFT DOMHASH February 1999 public byte[] getDigest(String digestAlgorithm) { MessageDigest md = MessageDigest.getInstance(digestAlgorithm); ByteArrayOutputStream baos = new ByteArrayOutputStream(); DataOutputStream dos = new DataOutputStream(baos); dos.writeInt(Node.ELEMENT_NODE);//This is stored in network byte order dos.write(getExpandedName().getBytes("UnicodeBigUnmarked")); dos.write((byte)0); dos.write((byte)0); // Collect all attributes except for namespace declarations NamedNodeMap nnm = this.getAttributes(); int len = nnm.getLength() // Find "xmlns" or "xmlns:foo" in nnm and omit it. ... dos.writeInt(len); // This is sorted in the network byte order // Sort attributes by String#compareTo() on expanded attribute names. ... // Assume that `Attr[] aattr' has sorted Attribute instances. for (int i = 0; i < len; i ++) dos.write(aattr[i].getDigest(digestAlgorithm)); Node n = this.getFirstChild(); // Assume that adjoining Texts are merged, // there is no 0-length Text, and // comment nodes are removed. len = this.getChildNodes().getLength(); dos.writeInt(len); // This is stored in the network byte order while (n != null) { dos.write(n.getDigest(digestAlgorithm)); n = n.getNextSibling(); } dos.close(); md.update(baos.toByteArray()); return md.digest(); } 3. Suggested API We propose to add a new method to the Node interface as shown below. The getDigest() method takes one string as its parameter that specifies the digest algorithm. We assume that at least two algorithms, "MD5" and "SHA-1", must be implemented for any DOM processor to be compliant with DOMHASH. H. Maruyama, K. Tamura, & N. Uramoto [Page 10] INTERNET-DRAFT DOMHASH February 1999 public interface Node { // NodeType public static final short ELEMENT_NODE = 1; public static final short ATTRIBUTE_NODE = 2; public static final short TEXT_NODE = 3; public static final short CDATA_SECTION_NODE = 4; public static final short ENTITY_REFERENCE_NODE = 5; public static final short ENTITY_NODE = 6; public static final short PROCESSING_INSTRUCTION_NODE = 7; public static final short COMMENT_NODE = 8; public static final short DOCUMENT_NODE = 9; public static final short DOCUMENT_TYPE_NODE = 10; public static final short DOCUMENT_FRAGMENT_NODE = 11; public static final short NOTATION_NODE = 12; public String getNodeName(); public String getNodeValue(); public void setNodeValue(String arg); public short getNodeType(); public Node getParentNode(); public NodeList getChildNodes(); public Node getFirstChild(); public Node getLastChild(); public Node getPreviousSibling(); public Node getNextSibling(); public NamedNodeMap getAttributes(); public Document getOwnerDocument(); public Node insertBefore(Node newChild, Node refChild) throws DOMException; public Node replaceChild(Node newChild, Node oldChild) throws DOMException; public Node removeChild(Node oldChild) throws DOMException; public Node appendChild(Node newChild) throws DOMException; public boolean hasChildNodes(); public Node cloneNode(boolean deep); public byte[] getDigest(String digestAlgorithm); }; 4. Discussion The definition described above can be efficiently implemented with any XML processor that is conformant to either DOM and SAX specification. Reference implementations are available on request. H. Maruyama, K. Tamura, & N. Uramoto [Page 11] INTERNET-DRAFT DOMHASH February 1999 5. Security Considerations DOMHASH is expected to be used as the basis for digital signature [DSG] and other security and integrity uses. It's appropriateness for such uses depends on the security of the hash algorithm used and inclusion of the fundamental characteristics it is desired to check in parts of the DOM model incorporated in the digest by DOMHASH. H. Maruyama, K. Tamura, & N. Uramoto [Page 12] INTERNET-DRAFT DOMHASH February 1999 References [DOM] - "Document Object Model (DOM), Level 1 Specification", October 1998, http://www.w3.org/TR/REC-DOM-Level-1/ [DSG] - Richard D Brown, "Digital Signatures for XML", http://www.ietf.org/internet-drafts/draft-brown-xml-dsig-00.txt. [MD5] - RFC 1321 - R. Rivest, "The MD5 Message-Digest Algorithm", April 1992. [NAM] - Tim Bray, Dave Hollander, Andrew Layman, "Namespaces in XML", http://www.w3.org/TR/1999/REC-xml-names-19990114. [SAX] - David Megginson, "SAX 1.0: The Simple API for XML", http://www.megginson.com/SAX/, May 1998. [URI] - RFC 2396 - T. Berners-Lee, R. Fielding, L. Masinter, "Uniform Resource Identifiers (URI): Generic Syntax", August 1998. [XML] - Tim Bray, Jean Paoli, C. M. Sperber-McQueen, "Extensible Markup Language (XML) 1.0", http://www.w3.org/TR/1998/REC-xml- 19980210 H. Maruyama, K. Tamura, & N. Uramoto [Page 13] INTERNET-DRAFT DOMHASH February 1999 Author's Address Hiroshi Maruyama, IBM Research, Tokyo Research Laboratory email: maruyama @ jp.ibm.com Kent Tamura, IBM Research, Tokyo Research Laboratory email: kent @ trl.ibm.co.jp Naohiko Uramoto, IBM Research, Tokyo Research Laboratory email: uramoto @ jp.ibm.com Expiration and File Name This draft expires August 1999. Its file name is draft-hiroshi-dom-hash-01.txt. H. Maruyama, K. Tamura, & N. Uramoto [Page 14]