IPv6 MIB Revision Design Team Bill Fenner INTERNET-DRAFT AT&T Research Expires: May 2002 Brian Haberman Nortel Networks Keith McCloghrie Cisco Systems Juergen Schoenwalder TU Braunschweig Dave Thaler Microsoft November 2001 Management Information Base for the User Datagram Protocol (UDP) draft-ietf-ipngwg-rfc2013-update-01.txt Status of this Document This document is an Internet-Draft and is in full conformance with all provisions of Section 10 of RFC2026. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This document is a product of the IPv6 MIB Revision Design Team. Comments should be addressed to the authors, or the mailing list at ipng@sunroof.eng.sun.com. Copyright Notice Copyright (C) The Internet Society (2001). All Rights Reserved. Fenner [Page 1] INTERNET-DRAFT Expires: May 2002 November 2001 Abstract This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects used for implementations of the User Datagram Protocol (UDP) [4] in an IP version independent manner. Fenner [Page 2] INTERNET-DRAFT Expires: May 2002 November 2001 Table of Contents 1. The SNMP Management Framework . . . . . . . . . . . . . . . . . . 3 2. Revision History. . . . . . . . . . . . . . . . . . . . . . . . . 4 3. MIB Structure . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 5. Open Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 6. Acknowledgements. . . . . . . . . . . . . . . . . . . . . . . . . 19 7. References. . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 8. Security Considerations . . . . . . . . . . . . . . . . . . . . . 21 9. Editor's Address. . . . . . . . . . . . . . . . . . . . . . . . . 21 10. Full Copyright Statement . . . . . . . . . . . . . . . . . . . . 22 1. The SNMP Management Framework The SNMP Management Framework presently consists of five major components: o An overall architecture, described in RFC 2571 [5]. o Mechanisms for describing and naming objects and events for the purpose of management. The first version of this Structure of Management Information (SMI) is called SMIv1 and described in STD 16, RFC 1155 [6], STD 16, RFC 1212 [7] and RFC 1215 [8]. The second version, called SMIv2, is described in STD 58, RFC 2578 [9], STD 58, RFC 2579 [10] and STD 58, RFC 2580 [11]. o Message protocols for transferring management information. The first version of the SNMP message protocol is called SNMPv1 and described in STD 15, RFC 1157 [12]. A second version of the SNMP message protocol, which is not an Internet standards track protocol, is called SNMPv2c and described in RFC 1901 [13] and RFC 1906 [14]. The third version of the message protocol is called SNMPv3 and described in RFC 1906 [14], RFC 2572 [15] and RFC 2574 [16]. o Protocol operations for accessing management information. The first set of protocol operations and associated PDU formats is described in STD 15, RFC 1157 [12]. A second set of protocol operations and associated PDU formats is described in RFC 1905 [17]. o A set of fundamental applications described in RFC 2573 [18] and the view-based access control mechanism described in RFC 2575 [19]. A more detailed introduction to the current SNMP Management Framework can be found in RFC 2570 [20]. Fenner Section 1. [Page 3] INTERNET-DRAFT Expires: May 2002 November 2001 Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the mechanisms defined in the SMI. This memo specifies a MIB module that is compliant to the SMIv2. A MIB conforming to the SMIv1 can be produced through the appropriate translations. The resulting translated MIB must be semantically equivalent, except where objects or events are omitted because no translation is possible (use of Counter64). Some machine readable information in SMIv2 will be converted into textual descriptions in SMIv1 during the translation process. However, this loss of machine readable information is not considered to change the semantics of the MIB. 2. Revision History Changes from draft-ietf-ipngwg-rfc2013-update-00.txt 14 November 2001 Added udpConnectionTable Added udpListenerRemoteAddressType, to distinguish e.g. IPV6_V6ONLY Added counters to udpListenerTable and udpConnectionTable Changes from draft-ops-rfc2013-update-00.txt 12 Jul 2001 Turned into IPNG WG document Changes from first draft posted to v6mib mailing list: 23 Feb 2001 Made threshold for HC packet counters 1Mpps Added copyright statements and table of contents 21 Feb 2001 -- Juergen's changes Renamed udpInetTable to udpListenerTable Updated Conformance info Fenner Section 2. [Page 4] INTERNET-DRAFT Expires: May 2002 November 2001 6 Feb 2001 Removed v6-only objects. Removed remote and instance objects, turning the table back into a listener-only table. Renamed inetUdp* to udpInet* Added HC in and out datagram counters Added SIZE restriction to udpListenerLocalAddress. (36 = 32-byte addresses plus 4-byte scope, but it's just a strawman) Used InetPortNumber TC from updated INET-ADDRESS-MIB Updated compliance statements. Added Keith to authors Added open issues section. 3. MIB Structure (Obviously this section needs a lot of work) Addresses are as seen on the wire, not necessarily as the socket sees them (e.g. IPv4 address, not IPv6-mapped IPv4) Listener on in6addr_any without IPV6_V6ONLY socket option set (i.e. willing to accept v4 or v6) is indicated by remote AF = unknown. 4. Definitions UDP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Unsigned32, IpAddress, mib-2 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InetAddress, InetAddressType, InetPortNumber FROM INET-ADDRESS-MIB; udpMIB MODULE-IDENTITY LAST-UPDATED "200111150000Z" ORGANIZATION "IETF IPv6 MIB Revision Team" Fenner Section 4. [Page 5] INTERNET-DRAFT Expires: May 2002 November 2001 CONTACT-INFO "Bill Fenner (editor) AT&T Labs -- Research 75 Willow Rd. Menlo Park, CA 94025 Phone: +1 650 330-7893 Email: " DESCRIPTION "The MIB module for managing UDP implementations." REVISION "200111150000Z" DESCRIPTION "IP version neutral revision, published as RFC XXXX." REVISION "9411010000Z" DESCRIPTION "Initial SMIv2 version, published as RFC 2013." REVISION "9103310000Z" DESCRIPTION "The initial revision of this MIB module was part of MIB-II." ::= { mib-2 50 } -- the UDP group udp OBJECT IDENTIFIER ::= { mib-2 7 } udpInDatagrams OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of UDP datagrams delivered to UDP users." ::= { udp 1 } udpNoPorts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received UDP datagrams for which there was no application at the destination port." ::= { udp 2 } udpInErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION Fenner Section 4. [Page 6] INTERNET-DRAFT Expires: May 2002 November 2001 "The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port." ::= { udp 3 } udpOutDatagrams OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of UDP datagrams sent from this entity." ::= { udp 4 } udpHCInDatagrams OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of UDP datagrams delivered to UDP users, for devices which can receive more than 1 million UDP packets per second." ::= { udp 26 } udpHCOutDatagrams OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of UDP datagrams sent from this entity, for devices which can transmit more than 1 million UDP packets per second." ::= { udp 27 } -- The UDP Listener table udpListenerTable OBJECT-TYPE SYNTAX SEQUENCE OF UdpListenerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing UDP information about this entity's UDP endpoints on which a local application is currently accepting or sending datagrams. Note that despite the name, UDP listeners are not restricted to receiving packets; they may also send packets sourced from the listening address and port. Fenner Section 4. [Page 7] INTERNET-DRAFT Expires: May 2002 November 2001 An entity may have multiple applications listening to the same UDP endpoint; these are discriminated using the udpListenerInstance object." ::= { udp 7 } udpListenerEntry OBJECT-TYPE SYNTAX UdpListenerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular current UDP listener." INDEX { udpListenerLocalAddressType, udpListenerLocalAddress, udpListenerLocalPort, udpListenerRemoteAddressType, udpListenerInstance } ::= { udpListenerTable 1 } UdpListenerEntry ::= SEQUENCE { udpListenerLocalAddressType InetAddressType, udpListenerLocalAddress InetAddress, udpListenerLocalPort InetPortNumber, udpListenerRemoteAddressType InetAddressType, udpListenerInstance Unsigned32, udpListenerInPackets Counter32, udpListenerHCInPackets Counter64, udpListenerOutPackets Counter32, udpListenerHCOutPackets Counter64, udpListenerInOctets Counter32, udpListenerHCInOctets Counter64, udpListenerOutOctets Counter32, udpListenerHCOutOctets Counter64, udpListenerProcessID Unsigned32 } udpListenerLocalAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of udpListenerLocalAddress. Only IPv4 and IPv6 addresses are expected." ::= { udpListenerEntry 1 } udpListenerLocalAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0..36)) MAX-ACCESS not-accessible Fenner Section 4. [Page 8] INTERNET-DRAFT Expires: May 2002 November 2001 STATUS current DESCRIPTION "The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, a value of all zeroes is used." ::= { udpListenerEntry 2 } udpListenerLocalPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The local port number for this UDP listener." ::= { udpListenerEntry 3 } udpListenerRemoteAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of packets that will be accepted by this listener. Only IPv4 and IPv6 addresses are expected, or unknown to indicate an endpoint willing to accept both IPv4 and IPv6 packets." ::= { udpListenerEntry 4 } udpListenerInstance OBJECT-TYPE SYNTAX Unsigned32 (1..'ffffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The instance of this tuple. This object is used to distinguish between multiple processes listening on the same UDP endpoint." ::= { udpListenerEntry 5 } udpListenerInPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets received for this listener." ::= { udpListenerEntry 6 } udpListenerHCInPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only Fenner Section 4. [Page 9] INTERNET-DRAFT Expires: May 2002 November 2001 STATUS current DESCRIPTION "The count of packets received for this listener." ::= { udpListenerEntry 7 } udpListenerOutPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets sent by this listener." ::= { udpListenerEntry 8 } udpListenerHCOutPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets sent by this listener." ::= { udpListenerEntry 9 } udpListenerInOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of octets received for this listener." ::= { udpListenerEntry 10 } udpListenerHCInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of octets received for this listener." ::= { udpListenerEntry 11 } udpListenerOutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of octets sent by this listener." ::= { udpListenerEntry 12 } udpListenerHCOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only Fenner Section 4. [Page 10] INTERNET-DRAFT Expires: May 2002 November 2001 STATUS current DESCRIPTION "The count of octets sent by this listener." ::= { udpListenerEntry 13 } udpListenerProcessID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The system's process ID for the process associated with this listener, or zero if there is no such process. This value is expected to be the same as HOST-RESOURCES- MIB::hrSWRunIndex or SYSAPPL-MIB::sysApplElmtRunIndex for some row in the appropriate tables." ::= { udpListenerEntry 14 } -- The UDP "Connection" table. udpConnectionTable OBJECT-TYPE SYNTAX SEQUENCE OF UdpConnectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing UDP 'connection' information. Although UDP is a connectionless protocol, a system might demultiplex UDP packets based upon the local and remote addresses and ports." ::= { udp 8 } udpConnectionEntry OBJECT-TYPE SYNTAX UdpConnectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular current UDP connection." INDEX { udpConnectionLocalAddressType, udpConnectionLocalAddress, udpConnectionLocalPort, udpConnectionRemoteAddress, udpConnectionRemotePort, udpConnectionInstance } ::= { udpConnectionTable 1 } UdpConnectionEntry ::= SEQUENCE { Fenner Section 4. [Page 11] INTERNET-DRAFT Expires: May 2002 November 2001 udpConnectionLocalAddressType InetAddressType, udpConnectionLocalAddress InetAddress, udpConnectionLocalPort InetPortNumber, udpConnectionRemoteAddress InetAddress, udpConnectionRemotePort InetPortNumber, udpConnectionInstance Unsigned32, udpConnectionInPackets Counter32, udpConnectionHCInPackets Counter64, udpConnectionOutPackets Counter32, udpConnectionHCOutPackets Counter64, udpConnectionInOctets Counter32, udpConnectionHCInOctets Counter64, udpConnectionOutOctets Counter32, udpConnectionHCOutOctets Counter64, udpConnectionProcessID Unsigned32 } udpConnectionLocalAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of udpConnectionLocalAddress. Only IPv4 and IPv6 addresses are expected." ::= { udpConnectionEntry 1 } udpConnectionLocalAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0..36)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The local IP address for this UDP connection." ::= { udpConnectionEntry 2 } udpConnectionLocalPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The local port number for this UDP connection." ::= { udpConnectionEntry 3 } udpConnectionRemoteAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0..36)) MAX-ACCESS not-accessible STATUS current DESCRIPTION Fenner Section 4. [Page 12] INTERNET-DRAFT Expires: May 2002 November 2001 "The remote IP address for this UDP connection. It has the same type as udpConnectionLocalAddress." ::= { udpConnectionEntry 4 } udpConnectionRemotePort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The remote port number for this UDP connection." ::= { udpConnectionEntry 5 } udpConnectionInstance OBJECT-TYPE SYNTAX Unsigned32 (1..'ffffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The instance of this tuple. This object is used to distinguish between multiple processes 'connected' to the same UDP endpoint." ::= { udpConnectionEntry 6 } udpConnectionInPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets received for this connection." ::= { udpConnectionEntry 7 } udpConnectionHCInPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets received for this connection." ::= { udpConnectionEntry 8 } udpConnectionOutPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets sent on this connection." ::= { udpConnectionEntry 9 } udpConnectionHCOutPackets OBJECT-TYPE SYNTAX Counter64 Fenner Section 4. [Page 13] INTERNET-DRAFT Expires: May 2002 November 2001 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets sent on this connection." ::= { udpConnectionEntry 10 } udpConnectionInOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of octets received for this connection." ::= { udpConnectionEntry 11 } udpConnectionHCInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of octets received for this connection." ::= { udpConnectionEntry 12 } udpConnectionOutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of octets sent on this connection." ::= { udpConnectionEntry 13 } udpConnectionHCOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of octets sent on this connection." ::= { udpConnectionEntry 14 } udpConnectionProcessID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The system's process ID for the process associated with this connection, or zero if there is no such process. This value is expected to be the same as HOST-RESOURCES- MIB::hrSWRunIndex or SYSAPPL-MIB::sysApplElmtRunIndex for some row in the appropriate tables." Fenner Section 4. [Page 14] INTERNET-DRAFT Expires: May 2002 November 2001 ::= { udpConnectionEntry 15 } -- The deprecated UDP Listener table -- The UDP listener table contains information about this -- entity's IPv4 UDP end-points on which a local application is -- currently accepting datagrams. udpTable OBJECT-TYPE SYNTAX SEQUENCE OF UdpEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A table containing IPv4-specific UDP listener information. It contains information about all local IPv4 UDP end-points on which an application is currently accepting datagrams. This table has been deprecated in favor of the version neutral udpListenerTable." ::= { udp 5 } udpEntry OBJECT-TYPE SYNTAX UdpEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Information about a particular current UDP listener." INDEX { udpLocalAddress, udpLocalPort } ::= { udpTable 1 } UdpEntry ::= SEQUENCE { udpLocalAddress IpAddress, udpLocalPort INTEGER } udpLocalAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used." ::= { udpEntry 1 } Fenner Section 4. [Page 15] INTERNET-DRAFT Expires: May 2002 November 2001 udpLocalPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The local port number for this UDP listener." ::= { udpEntry 2 } -- conformance information udpMIBConformance OBJECT IDENTIFIER ::= { udpMIB 2 } udpMIBCompliances OBJECT IDENTIFIER ::= { udpMIBConformance 1 } udpMIBGroups OBJECT IDENTIFIER ::= { udpMIBConformance 2 } -- compliance statements udpMIBCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for systems which implement UDP." MODULE -- this module MANDATORY-GROUPS { udpBaseGroup, udpListenerGroup } GROUP udpHCGroup DESCRIPTION "This group is mandatory for those systems which are capable of receiving or transmitting more than 1 million UDP packets per second. 1 million packets per second will cause a Counter32 to wrap in just over an hour." GROUP udpListenerStatsGroup DESCRIPTION "This group is optional." GROUP udpListenerHCStatsGroup DESCRIPTION "This group is mandatory for systems which implement udpListenerStatsGroup and are capable of receiving or transmitting more than 1 million UDP packets per second. 1 million packets per second will cause a Counter32 to wrap in just over an hour." GROUP udpConnectionGroup DESCRIPTION "This group is mandatory for systems which implement the UDP 'connection' abstraction." GROUP udpConnectionStatsGroup DESCRIPTION "This group is optional." Fenner Section 4. [Page 16] INTERNET-DRAFT Expires: May 2002 November 2001 GROUP udpConnectionHCStatsGroup DESCRIPTION "This group is mandatory for systems which implement udpConnectionStatsGroup and are capable of receiving or transmitting more than 1 million UDP packets per second. 1 million packets per second will cause a Counter32 to wrap in just over an hour." ::= { udpMIBCompliances 2 } udpMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for IPv4-only systems which implement UDP. For IP version independence, this compliance statement is deprecated in favor of udpMIBCompliance2. However, agents are still encouraged to implement these objects in order to interoperate with the deployed base of managers." MODULE -- this module MANDATORY-GROUPS { udpGroup } ::= { udpMIBCompliances 1 } -- units of conformance udpGroup OBJECT-GROUP OBJECTS { udpInDatagrams, udpNoPorts, udpInErrors, udpOutDatagrams, udpLocalAddress, udpLocalPort } STATUS deprecated DESCRIPTION "The deprecated group of objects providing for management of UDP over IPv4." ::= { udpMIBGroups 1 } udpBaseGroup OBJECT-GROUP OBJECTS { udpInDatagrams, udpNoPorts, udpInErrors, udpOutDatagrams } STATUS current DESCRIPTION "The group of objects providing for counters of UDP statistics." ::= { udpMIBGroups 2 } udpHCGroup OBJECT-GROUP OBJECTS { udpHCInDatagrams, udpHCOutDatagrams } STATUS current DESCRIPTION "The group of objects providing for counters of high speed Fenner Section 4. [Page 17] INTERNET-DRAFT Expires: May 2002 November 2001 UDP implementations." ::= { udpMIBGroups 3 } udpListenerGroup OBJECT-GROUP OBJECTS { udpListenerInstance } STATUS current DESCRIPTION "The group of objects providing for the IP version independent management of UDP listeners." ::= { udpMIBGroups 4 } udpListenerStatsGroup OBJECT-GROUP OBJECTS { udpListenerInPackets, udpListenerOutPackets, udpListenerInOctets, udpListenerOutOctets, udpListenerProcessID } STATUS current DESCRIPTION "The group of objects to provide statistics about UDP listeners." ::= { udpMIBGroups 5 } udpListenerHCStatsGroup OBJECT-GROUP OBJECTS { udpListenerHCInPackets, udpListenerHCOutPackets, udpListenerHCInOctets, udpListenerHCOutOctets } STATUS current DESCRIPTION "The group of objects to provide statitics about UDP listeners on high speed UDP implementations." ::= { udpMIBGroups 6 } udpConnectionGroup OBJECT-GROUP OBJECTS { udpConnectionInstance } STATUS current DESCRIPTION "The group of objects providing for the IP version independent management of UDP 'connections'." ::= { udpMIBGroups 7 } udpConnectionStatsGroup OBJECT-GROUP OBJECTS { udpConnectionInstance, udpConnectionInPackets, udpConnectionOutPackets, udpConnectionInOctets, udpConnectionOutOctets, udpConnectionProcessID } STATUS current DESCRIPTION "The group of objects providing statistics about UDP 'connections'." ::= { udpMIBGroups 8 } Fenner Section 4. [Page 18] INTERNET-DRAFT Expires: May 2002 November 2001 udpConnectionHCStatsGroup OBJECT-GROUP OBJECTS { udpConnectionHCInPackets, udpConnectionHCOutPackets, udpConnectionHCInOctets, udpConnectionHCOutOctets } STATUS current DESCRIPTION "The group of objects to provide statitics about UDP 'connections' on high speed UDP implementations." ::= { udpMIBGroups 9 } END 5. Open Issues Why is udpListenerRemoteAddressType = unknown better than udpListenerLocalAddressType = unknown and udpListenerLocalAddress = ''h? Then we could get rid of udpListenerRemoteAddressType. "sent by this listener" on counters is insanely confusing. RFC 768 just describes receive ports and send operations, but that doesn't jibe with modern implementations, e.g. BSD sockets, winsock, etc. Multicast membership info? Is udp*ProcessID OK? Should there be an OID pointer into a row of some *Run* table? 6. Acknowledgements This document contains a modified subset of RFC 1213 and updates RFC 2013 and RFC 2454. 7. References [1] Rose, M. and K. McCloghrie, "Management Information Base for Network Management of TCP/IP-based internets", RFC 1213, March 1991. [2] K. McCloghrie, "SNMPv2 Management Information Base for the User Datagram Protocol using SMIv2", RFC 2013, November 1996. [3] Haskin, D. and S. Onishi, "IP Version 6 Management Information Base for the User Datagram Protocol", RFC 2454, December 1998. [4] Postel, J., "User Datagram Protocol", STD 6, RFC 768, DARPA, August 1980. Fenner Section 7. [Page 19] INTERNET-DRAFT Expires: May 2002 November 2001 [5] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for Describing SNMP Management Frameworks", RFC 2571, April 1999. [6] Rose, M., and K. McCloghrie, "Structure and Identification of Management Information for TCP/IP-based Internets", STD 16, RFC 1155, May 1990. [7] Rose, M., and K. McCloghrie, "Concise MIB Definitions", STD 16, RFC 1212, March 1991. [8] Rose, M., "A Convention for Defining Traps for use with the SNMP", RFC 1215, March 1991. [9] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M., and S. Waldbusser, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. [10] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M., and S. Waldbusser, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999. [11] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M., and S. Waldbusser, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999. [12] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple Network Management Protocol", STD 15, RFC 1157, May 1990. [13] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Introduction to Community-based SNMPv2", RFC 1901, January 1996. [14] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Transport Mappings for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1906, January 1996. [15] Case, J., Harrington D., Presuhn R., and B. Wijnen, "Message Processing and Dispatching for the Simple Network Management Protocol (SNMP)", RFC 2572, April 1999. [16] Blumenthal, U., and B. Wijnen, "User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)", RFC 2574, April 1999. [17] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Protocol Operations for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1905, January 1996. Fenner Section 7. [Page 20] INTERNET-DRAFT Expires: May 2002 November 2001 [18] Levi, D., Meyer, P., and B. Stewart, "SNMPv3 Applications", RFC 2573, April 1999. [19] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP)", RFC 2575, April 1999. [20] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction to Version 3 of the Internet-standard Network Management Framework", RFC 2570, April 1999. 8. Security Considerations There are no management objects defined in this MIB that have a MAX- ACCESS clause of read-write and/or read-create. So, if this MIB is implemented correctly, then there is no risk that an intruder can alter or create any management objects of this MIB via direct SNMP SET operations. There are a number of managed objects in this MIB that may contain sensitive information. These are: o The udpListenerLocalPort and udpLocalPort objects can be used to identify what ports are open on the machine and can thus what attacks are likely to succeed, without the attacker having to run a port scanner. It is thus important to control even GET access to these objects and possibly to even encrypt the values of these object when sending them over the network via SNMP. Not all versions of SNMP provide features for such a secure environment. SNMPv1 by itself is not a secure environment. Even if the network itself is secure (for example by using IPSec), even then, there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB. It is recommended that the implementers consider the security features as provided by the SNMPv3 framework. Specifically, the use of the User- based Security Model RFC 2574 [16] and the View-based Access Control Model RFC 2575 [19] is recommended. It is then a customer/user responsibility to ensure that the SNMP entity giving access to an instance of this MIB, is properly configured to give access to the objects only to those principals (users) that have Fenner Section 8. [Page 21] INTERNET-DRAFT Expires: May 2002 November 2001 legitimate rights to indeed GET or SET (change/create/delete) them. 9. Editor's Address Bill Fenner AT&T Labs -- Research 75 Willow Rd Menlo Park, CA 94025 USA Email: fenner@research.att.com 10. Full Copyright Statement Copyright (C) The Internet Society (2001). All Rights Reserved. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English. The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns. This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Fenner Section 10. [Page 22]