HIP Working Group P. Nikander Internet-Draft Ericsson Research Nomadic Lab Expires: August 21, 2005 J. Laganier LIP / Sun Microsystems February 20, 2005 Host Identity Protocol (HIP) Domain Name System (DNS) Extensions draft-ietf-hip-dns-01 Status of this Memo This document is an Internet-Draft and is subject to all provisions of section 3 of RFC 3667. By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she become aware will be disclosed, in accordance with RFC 3668. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on August 21, 2005. Copyright Notice Copyright (C) The Internet Society (2005). Abstract This document specifies two new resource records (RRs) for the Domain Name System (DNS), and how to use them with the Host Identity Protocol (HIP). These RRs allow a HIP node to store in the DNS its Host Identity (HI, the public component of the node public-private key pair), Host Identity Tag (HIT, a truncated hash of its public key), and the Domain Name or IP addresses of its Rendezvous Servers Nikander & Laganier Expires August 21, 2005 [Page 1] Internet-Draft HIP DNS Extensions February 2005 (RVS). Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Conventions used in this document . . . . . . . . . . . . . . 5 3. Usage Scenarios . . . . . . . . . . . . . . . . . . . . . . . 6 3.1 Simple static singly homed end-host . . . . . . . . . . . 7 3.2 Mobile end-host . . . . . . . . . . . . . . . . . . . . . 8 3.3 Mixed Scenario . . . . . . . . . . . . . . . . . . . . . . 9 4. Overview of using the DNS with HIP . . . . . . . . . . . . . . 10 4.1 Storing HI and HIT in DNS . . . . . . . . . . . . . . . . 10 4.1.1 Different types of HITs . . . . . . . . . . . . . . . 10 4.2 Storing Rendezvous Servers in the DNS . . . . . . . . . . 11 4.3 Initiating connections based on DNS names . . . . . . . . 11 5. Storage Format . . . . . . . . . . . . . . . . . . . . . . . . 12 5.1 HIPHI RDATA format . . . . . . . . . . . . . . . . . . . . 12 5.1.1 HIT type format . . . . . . . . . . . . . . . . . . . 12 5.1.2 HIT algorithm format . . . . . . . . . . . . . . . . . 12 5.1.3 PK algorithm format . . . . . . . . . . . . . . . . . 12 5.1.4 HIT format . . . . . . . . . . . . . . . . . . . . . . 13 5.1.5 Public key format . . . . . . . . . . . . . . . . . . 13 5.2 HIPRVS RDATA format . . . . . . . . . . . . . . . . . . . 13 5.2.1 Preference format . . . . . . . . . . . . . . . . . . 14 5.2.2 Rendezvous server type format . . . . . . . . . . . . 14 5.2.3 Rendezvous server format . . . . . . . . . . . . . . . 14 6. Presentation Format . . . . . . . . . . . . . . . . . . . . . 16 6.1 HIPHI Representation . . . . . . . . . . . . . . . . . . . 16 6.2 HIPRVS Representation . . . . . . . . . . . . . . . . . . 16 6.3 Examples . . . . . . . . . . . . . . . . . . . . . . . . . 17 7. Retrieving Multiple HITs and IPs from the DNS . . . . . . . . 18 8. Transition mechanisms . . . . . . . . . . . . . . . . . . . . 19 9. Security Considerations . . . . . . . . . . . . . . . . . . . 20 9.1 Attacker tampering with an unsecure HIPHI RR . . . . . . . 20 9.2 Attacker tampering with an unsecure HIPRVS RR . . . . . . 20 9.3 Opportunistic HIP . . . . . . . . . . . . . . . . . . . . 21 9.4 Unpublished Initiator HI . . . . . . . . . . . . . . . . . 21 9.5 Hash and HITs Collisions . . . . . . . . . . . . . . . . . 21 10. IANA Considerations . . . . . . . . . . . . . . . . . . . . 22 11. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . 23 12. References . . . . . . . . . . . . . . . . . . . . . . . . . 24 12.1 Normative references . . . . . . . . . . . . . . . . . . . . 24 12.2 Informative references . . . . . . . . . . . . . . . . . . . 25 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . 25 A. Document Revision History . . . . . . . . . . . . . . . . . . 26 Intellectual Property and Copyright Statements . . . . . . . . 27 Nikander & Laganier Expires August 21, 2005 [Page 2] Internet-Draft HIP DNS Extensions February 2005 1. Introduction This document specifies two new resource records (RRs) for the Domain Name System (DNS) [1], and how to use them with the Host Identity Protocol (HIP) [10]. These RRs allow a HIP node to store in the DNS its Host Identity (HI, the public component of the node public-private key pair), Host Identity Tag (HIT, a truncated hash of its HI), and the Domain Name or IP addresses of its Rendezvous Servers (RVS) [13]. The current Internet architecture defines two global namespaces: IP addresses and domain names. The Domain Name System provides a two way lookup between these two namespaces. The HIP architecture [11] defines a new third namespace, called the Host Identity Namespace. This namespace is composed of Host Identifiers (HI) of HIP nodes. The Host Identity Tag (HIT) is one representation of an HI. This representation is obtained by taking the output of a secure hash function applied to the HI, truncated to the IPv6 address size. HITs are supposed to be used in the place of IP addresses within most ULPs and applications. +-----+ +-----+ | |-------I1------>| | | I |<------R1-------| R | | |-------I2------>| | | |<------R2-------| | +-----+ +-----+ The Host Identity Protocol [10] allows two HIP nodes to establish together a HIP Association. A HIP association is bound to the nodes HIs rather than to their IP address(es). Although a HIP node can initiate HIP communication "opportunistically", i.e., without a priori knowledge of its peer's HI, doing so exposes both endpoints to Man-in-the-Middle attacks on the HIP handshake and its cryptographic protocol. Hence, there is a desire to gain knowledge of peers' HI before applications and ULPs initiate communication. Because many applications use the Domain Name System [1] to name nodes, DNSSEC [3] is a straightforward way to provision nodes with the HIP informations (i.e. HI and possibly RVS) of nodes named in the DNS tree, without introducing or relying on an additional piece of infrastructure. Nikander & Laganier Expires August 21, 2005 [Page 3] Internet-Draft HIP DNS Extensions February 2005 +-----+ +--I1--->| RVS |---I1--+ | +-----+ | | v +-----+ +-----+ | |<------R1-------| | | I |-------I2------>| R | | |<------R2-------| | +-----+ +-----+ The proposed HIP multi-homing mechanisms [12] allow a node to dynamically change its set of underlying IP addresses while maintaining IPsec SA and transport layer session survivability. The HIP rendezvous extensions [13] proposal allows a HIP node to maintain HIP reachability while it is changing its current location (the node IP address(es)). This rendezvous service is provided by a third party, the node's Rendezvous Server (RVS). An initiator (I) willing to establish a HIP association with a responder (R) would typically initiate a HIP exchange by sending an I1 towards the RVS IP address rather than towards the responder IP address. Then, the RVS, noticing that the receiver HIT is not its own, but the HIT of a HIP node registered for the rendezvous Service, would relay the I1 to the responder. Typically the responder would then complete the exchange without further assistance from the RVS by sending an R1 directly to the initiator IP address. Currently, most of the Internet applications that need to communicate with a remote host first translate a domain name (often obtained via user input) into one or more IP address(es). This step occurs prior to communication with the remote host, and relies on a DNS lookup. With HIP, IP addresses are expected to be used mostly for on-the-wire communication between end hosts, while most ULPs and applications uses HIs or HITs instead (ICMP might be an example of an ULP not using them). Consequently, we need a means to translate a domain name into an HI. Using the DNS for this translation is pretty straightforward: We define a new HIPHI (HIP HI) resource record. Upon query by an application or ULP for a FQDN -> IP lookup, the resolver would then additionally perform an FQDN -> HI lookup, and use it to construct the resulting HI -> IP mapping (which is internal to the HIP layer). The HIP layer uses the HI -> IP mapping to translate HIs and their local representations (HITs, IPv4 and IPv6-compatible LSIs) into IP addresses and vice versa. This draft introduces the following new DNS Resource Records: - HIPHI, for storing Host Identifiers and Host Identity Tags - HIPRVS, for storing rendezvous server information Nikander & Laganier Expires August 21, 2005 [Page 4] Internet-Draft HIP DNS Extensions February 2005 2. Conventions used in this document The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC2119 [4]. Nikander & Laganier Expires August 21, 2005 [Page 5] Internet-Draft HIP DNS Extensions February 2005 3. Usage Scenarios In this section, we briefly introduce a number of usage scenarios where the DNS is useful with the Host Identity Protocol. With HIP, most application and ULPs are unaware of the IP addresses used to carry packets on the wire. Consequently, a HIP node could take advantage of having multiple IP addresses for fail-over, redundancy, mobility, or renumbering, in a manner which is transparent to most ULPs and applications (because they are bound to HIs, hence they are agnostic to these IP address changes). In these situations, a node wishing to be reachable by reference to its FQDN should store the following informations in the DNS: o A set of IP address(es). o A Host Identity (HI) and/or Host Identity Tag (HIT). o An IP address or DNS name of its Rendezvous Server(s) (RVS). When a HIP node wants to initiate a communication with another HIP node, it first needs to perform a HIP base exchange to set-up a HIP association towards its peer. Although such an exchange can be initiated opportunistically, i.e., without a priori knowledge of the responder's HI, by doing so both nodes knowingly risk man-in-the-middle attacks on the HIP exchange. To prevent these attacks, it is recommended that the initiator first obtain the HI of the responder, and then initiate the exchange. This can be done, for example, through manual configuration or DNS lookups. Hence, a new HIPHI RR is introduced. When a HIP node is frequently changing its IP address(es), the dynamic DNS update latency may prevent it from publishing its new IP address(es) in the DNS. For solving this problem, the HIP architecture introduces Rendezvous Servers (RVS). A HIP host uses a Rendezvous Server as a Rendezvous point, to maintain reachability with possible HIP initiators. Such a HIP node would publish in the DNS its RVS IP address or DNS name in a HIPRVS RR, while keeping its RVS up-to-date with its current set of IP addresses. Then, when some other node wants to initiate a HIP exchange with such a responder, it retrieves the RVS IP address by looking up a HIPRVS RR at the FQDN of the responder, and sends an I1 to this IP address. The I1 will then be relayed by the RVS to the responder, which will then complete the HIP exchange, either directly or via the RVS [13]. Note that storing HIP RR information in the DNS at a FQDN which is assigned to a non-HIP node might have ill effects on its reachability by HIP nodes. Nikander & Laganier Expires August 21, 2005 [Page 6] Internet-Draft HIP DNS Extensions February 2005 3.1 Simple static singly homed end-host [A? HIPRVS? HIPHI?] [www.example.com ] +-----+ +-------------------------------->| | | | DNS | | +-------------------------------| | | | [A? HIPRVS? HIPHI? ] +-----+ | | [www.example.com ] | | [A IP-R ] | | [HIPHI 10 3 2 HIT-R HI-R] | v +-----+ +-----+ | |--------------I1------------->| | | I |<-------------R1--------------| R | | |--------------I2------------->| | | |<-------------R2--------------| | +-----+ +-----+ A HIP node (R) with a single static network attachment, wishing to be reachable by reference to its FQDN (www.example.com), would store in the DNS, in addition to its IP address(es) (IP-R), its Host Identity (HI-R) in a HIPHI resource record. Nikander & Laganier Expires August 21, 2005 [Page 7] Internet-Draft HIP DNS Extensions February 2005 3.2 Mobile end-host [A? HIPRVS? HIPHI?] [www.example.com ] +-----+ +--------------------------------->| | | | DNS | | +--------------------------------| | | | [A? HIPRVS? HIPHI? ] +-----+ | | [www.example.com ] | | [HIPRVS 1 2 IP-RVS ] | | [HIPHI 10 3 2 HIT-R HI-R] | | | | +-----+ | | +------I1----->| RVS |-----I1------+ | | | +-----+ | | | | | | | | | | v | v +-----+ +-----+ | |<---------------R1------------| | | I |----------------I2----------->| R | | |<---------------R2------------| | +-----+ +-----+ A mobile HIP node (R) wishing to be reachable by reference to its FQDN (www.example.com) would store in the DNS, possibly in addition to its IP address(es) (IP-R), its HI (HI-R) in a HIPHI RR, and the IP address(es) of its Rendezvous Server(s) (IP-RVS) in HIPRVS resource record(s). The mobile HIP node also need to notify its Rendezvous Servers of any change in its set of IP address(es). A host wanting to reach this mobile host would then send an I1 to one of its RVS. Following, the RVS will relay the I1 up to the mobile node, which will complete the HIP exchange. Nikander & Laganier Expires August 21, 2005 [Page 8] Internet-Draft HIP DNS Extensions February 2005 3.3 Mixed Scenario [A? HIPRVS? HIPHI?] [www.example.com ] +-----+ +--------------------------------->| | | | DNS | | +--------------------------------| | | | [A? HIPRVS? HIPHI? ] +-----+ | | [www.example.com ] | | [A IP-R1 ] | | [A IP-R2 ] | | [HIPRVS 1 2 IP-RVS1 ] | | [HIPRVS 1 2 IP-RVS2 ] | | [HIPHI 10 3 2 HIT-R HI-R] | | | | +------+ | | +-----I1----->| RVS1 |------I1------+ | | | +------+ | | v | v +-----+ +-----+ | |---------------I1------------->| | | | | | | I |<--------------R1--------------| R | | |---------------I2------------->| | | |<--------------R2--------------| | +-----+ +-----+ | ^ | +------+ | +-----I1----->| RVS2 |------I1------+ +------+ A HIP node might be configured with more than one IP address (multi-homed), or Rendezvous Server (multi-reachable). In these cases, it is possible that the DNS returns multiples A or AAAA RRs, as well as HIPRVS containing one or multiple Rendezvous Servers. In addition to its set of IP address(es) (IP-R1, IP-R2), a multi-homed end-host would store in the DNS its HI (HI-R) in a HIPHI RR, and possibly the IP address(es) of its RVS(s) (IP-RVS1, IP-RVS2) in HIPRVS RRs. Nikander & Laganier Expires August 21, 2005 [Page 9] Internet-Draft HIP DNS Extensions February 2005 4. Overview of using the DNS with HIP 4.1 Storing HI and HIT in DNS Any conforming implementation may store Host Identifiers in a DNS HIPHI RDATA format. An implementation may also store a HIT along with its associated HI. If a particular form of an HI or HIT does not already have a specified RDATA format, a new RDATA-like format SHOULD be defined for the HI or HIT. 4.1.1 Different types of HITs There are _currently_ two types of HITs. HITs of the first type consists just of the least significant bits of the hash of the public key. HITs of the second type consist of a binary prefix Host Assigning Authority (HAA) field, and only the last bits come from a hash of the Host Identity. This latter format for HIT is recommended for 'well known' systems. It is possible to support a resolution mechanism for these names in directories like DNS. Note that the format how HITs are stored in the DNS may be different form the format actually used in protocols, the HIP base exchange [10] included. This is because the DNS RR explicitly contains the HIT type and algorithm, while some protocols may prefer to use a prefix to indicate the HIT type. The implementations are expected to use the actual HI when comparing Host Identities. 4.1.1.1 Host Assigning Authority (HAA) field The 64 bits of HAA supports two levels of delegation. The first is a registered assigning authority (RAA). The second is a registered identity (RI, commonly a company). The RAA is 24 bits with values assign sequentially by ICANN. The RI is 40 bits, also assigned sequentially but by the RAA. 4.1.1.2 Storing HAA in DNS Any conforming implementation may store a domain name Host Assigning Authority (HAA) in a DNS HIPHI RDATA format. A HAA MUST be stored like a Type 2 HIT, while the least significant bits of the HIT extracted from the HI hash output are set to zero, the Host Identity Length is set zero, and the Host Identity field is omitted. If a particular form of a HAA does not already have an associated HIT specified RDATA format, a new RDATA-like format SHOULD be defined for the HIT/HAA. Nikander & Laganier Expires August 21, 2005 [Page 10] Internet-Draft HIP DNS Extensions February 2005 4.1.1.3 HI and HIT verification Upon return of a HIPHI RR, a host MUST always calculate the HI-derivative HIT to be used in the HIP exchange, as specified in the HIP architecture [11], while the HIT possibly embedded along SHOULD only be used as an optimization (e.g. table lookup). 4.2 Storing Rendezvous Servers in the DNS The HIP Rendezvous server (HIPRVS) resource record indicates an address or a domain name of a RendezVous Server, towards which a HIP I1 packet might be sent to trigger the establishment of an association with the entity named by this resource record [13]. An RVS receiving such an I1 would then relay it to the appropriate responder (the owner of the I1 receiver HIT). The responder will then complete the exchange with the initiator, typically without ongoing help from the RVS. Any conforming implementation may store Rendezvous Server's IP address(es) or DNS name in a DNS HIPRVS RDATA format. If a particular form of a RVS reference does not already have a specified RDATA format, a new RDATA-like format SHOULD be defined for the RVS. 4.3 Initiating connections based on DNS names On a HIP node, a Host Identity Protocol exchange SHOULD be initiated whenever an Upper Layer Protocol attempt to communicate with an entity and the DNS lookup returns HIPHI and/or HIPRVS resource records. If a DNS lookup returns one or more HIPRVS RRs and no A nor AAAA RRs, the afore mentioned HIP exchange SHOULD be initiated towards one of these RVS [10]. Since some hosts may choose not to have HIPHI information in DNS, hosts MAY implement support for opportunistic HIP. Nikander & Laganier Expires August 21, 2005 [Page 11] Internet-Draft HIP DNS Extensions February 2005 5. Storage Format 5.1 HIPHI RDATA format The RDATA for a HIPHI RR consists of a HIT type, an algorithm type, a HIT, and a public key. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | HIT type | HIT algorithm | PK algorithm | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ HIT | ~ ~ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | / / Public Key / / / +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-| 5.1.1 HIT type format The HIT type field indicates the Host Identity Tag (HIT) type and the implied HIT format. The following values are defined: 0 No HIT is present 1 A Type 1 HIT is present 2 A Type 2 HIT is present 3-6 Unassigned 7 A HAA is present 5.1.2 HIT algorithm format The HIT algorithm indicates the hash algorithm used to generate the Host Identity Tag (HIT) from the HI. The following values are defined: 0 Reserved 1 SHA1 2-255 Unassigned 5.1.3 PK algorithm format The PK algorithm field indicates the public key cryptographic Nikander & Laganier Expires August 21, 2005 [Page 12] Internet-Draft HIP DNS Extensions February 2005 algorithm and the implied public key field format. This document reuse the values defined for the 'algorithm type' of the IPSECKEY RR [14] 'gateway type' field. The presently defined values are given only informally: 1 A DSA key is present, in the format defined in RFC2536 [5]. 2 A RSA key is present, in the format defined in RFC3110 [6]. 5.1.4 HIT format There's currently two types of HITs, and a single type of HAA. Both of them are stored in network byte order within a self-describing variable length wire-encoded (as per Section 3.3 of [2]): o A *Type 1* HIT: least significant bits of the hash (e.g., SHA1) of the public key (Host Identity), which is possibly following in the HIPHI RR. o A *Type 2* HIT: binary prefix (HAA) concatenated with a the least significant bits of the hash (e.g., SHA1) of the public key (Host Identity), which is possibly following in the HIPHI RR. o A HAA: binary prefix (HAA) concatenated with 0, up to the associated HIT length. 5.1.5 Public key format Both of the public key types defined in this document (RSA and DSA) reuse the public key formats defined for the IPSECKEY RR [14] (which in turns contains the algorithm-specific portion of the KEY RR RDATA, all of the KEY RR DATA after the first four octets, corresponding to the same portion of the KEY RR that must be specified by documents that define a DNSSEC algorithm). In the future, if a new algorithm is to be used both by IPSECKEY RR and HIPHI RR, it would probably use the same public key encodings for both RRs. Unless specified otherwise, the HIPHI public key field would use the same public key format as the IPSECKEY RR RDATA for the corresponding algorithm. The DSA key format is defined in RFC2536 [5]. The RSA key format is defined in RFC3110 [6] and the RSA key size limit (4096 bits) is relaxed in the IPSECKEY RR [14] specification. 5.2 HIPRVS RDATA format The RDATA for a HIPRVS RR consists of a preference value, a Nikander & Laganier Expires August 21, 2005 [Page 13] Internet-Draft HIP DNS Extensions February 2005 Rendezvous server type and either one or more Rendezvous server address, or one Rendezvous server domain name. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | preference | type | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Rendezvous server | ~ ~ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ 5.2.1 Preference format This is an unsigned 8-bit value, used to specify the preference given to this RR amongst others at the same owner. Lower values are preferred. If there is a tie within some RR subset, the server should return a permutation (e.g. round robin) of the set of RRs, such that the requester load is fairly balanced amongst all RRs of the set. 5.2.2 Rendezvous server type format The Rendezvous server type indicates the format of the information stored in the Rendezvous server field. This document reuses the type values for the 'gateway type' field of the IPSECKEY RR [14]. The presently defined values are given only informally: 1. One or more 4-byte IPv4 address(es) in network byte order are present. 2. One or more 16-byte IPv6 address(es) in network byte order are present. 3. One or more variable length wire-encoded domain names as described in section 3.3 of RFC1035 [2]. The wire-encoded format is self-describing, so the length is implicit. The domain names MUST NOT be compressed. 5.2.3 Rendezvous server format The Rendezvous server field indicates one or more Rendezvous Server(s) IP address(es), or domain name(s). A HIP I1 packet sent to any of these RVS would reach the entity named by this resource record. This document reuses the format used for the 'gateway' field of the IPSECKEY RR [14], but allows to concatenate several IP (v4 or v6) Nikander & Laganier Expires August 21, 2005 [Page 14] Internet-Draft HIP DNS Extensions February 2005 addresses. The presently defined formats for the data portion of the Rendezvous server field are given only informally: o One or more 32-bit IPv4 address(es) in network byte order. o One or more 128-bit IPv6 address(es) in network byte order. o One or more variable length wire-encoded domain names as described in section 3.3 of RFC1035 [2]. The wire-encoded format is self-describing, so the length is implicit. The domain names MUST NOT be compressed. Nikander & Laganier Expires August 21, 2005 [Page 15] Internet-Draft HIP DNS Extensions February 2005 6. Presentation Format This section specifies the representation of the HIPHI and HIPRVS RR in a zone data master file. 6.1 HIPHI Representation The HIT Type, HIT algorithm, PK algorithm, and Public Key are REQUIRED. The HIT field is OPTIONAL. The HIT Type, HIT algorithm, and PK algorithm are represented as unsigned integers. The HIT field is represented as the Base16 encoding [8] (a.k.a. hex or hexadecimal) of the public key. If no HIT is to be indicated, then the HIT algorithm MUST be zero and the HIT field must be ".". The Public Key field is represented as the Base64 encoding [8] of the public key. The complete representation of the HPIHI record is: IN HIPHI ( hit-type hit-algorithm pk-algorithm base16-encoded-hit base64-encoded-public-key ) 6.2 HIPRVS Representation The Preference and RVS Type fields are REQUIRED. At least one RVS field MUST be present. The HIT Type, HIT algorithm, and PK algorithm are represented as unsigned integers. The RVS field is represented by one or more: o IPv4 dotted decimal address(es) o IPv6 colon hex address(es) o uncompressed domain name(s) The complete representation of the HPIRVS record is: IN HIPRVS ( preference rendezvous-server-type rendezvous-server[1] ... rendezvous-server[n] ) Nikander & Laganier Expires August 21, 2005 [Page 16] Internet-Draft HIP DNS Extensions February 2005 6.3 Examples Example of a node with a HI but no HIT: www.example.com IN HIPHI ( 0 1 2 . AB3NzaC1kc3MAAACBAOBhKnTCPOuFBzZQX/N3O9dm9P9ivUIMoId== ) Example of a node with a HI and a HIT: www.example.com IN HIPHI ( 1 1 2 120cf10ea842e0ba53320f1fe0ba5d3a3 AB3NzaC1kc3MAAACBAOBhKnTCPOuFBzZQX/N3O9dm9P9ivUIMoId== ) Example of a node with an IPv6 RVS: www.example.com IN HIPRVS ( 10 2 2001:0db8:0200:1:20c:f1ff:fe0b:a533 ) Example of a node with three IPv4 RVS: www.example.com IN HIPRVS ( 10 1 192.0.2.2 192.0.99.2 192.0.199.2) Example of a node with two named RVS: www.example.com IN HIPRVS ( 10 3 rvs.uk.example.com rvs.us.example.com ) Nikander & Laganier Expires August 21, 2005 [Page 17] Internet-Draft HIP DNS Extensions February 2005 7. Retrieving Multiple HITs and IPs from the DNS If a host receives multiple HITs in a response to a DNS query, those HITs MUST be considered to denote a single service, and be semantically equivalent from that point of view. When initiating a base exchange with the denoted service, the host SHOULD be prepared to accept any of HITs as the peer's identity. A host MAY implement this by using the opportunistic mode (destination HIT null in I1), or by sending multiple I1s, if needed. In particular, if a host receives multiple HITs and multiple IP addresses in response to a DNS query, the host cannot know how the HITs are reachable at the listed IP addresses. The mapping may be any, i.e., all HITs may be reachable at all of the listed IP addresses, some of the HITs may be reachable at some of the IP addresses, or there may even be one-to-one mapping between the HITs and IP addresses. In general, the host cannot know the mapping and MUST NOT expect any particular mapping. It is RECOMMENDED that if a host receives multiple HITs, the host SHOULD first try to initiate the base exchange by using the opportunistic mode. If the returned HIT does not match with any of the expected HITs, the host SHOULD retry by sending further I1s, one at time, trying out all of the listed HITs. If the host receives an R1 for any of the I1s, the host SHOULD continue to use the successful IP address until an R1 with a listed HIT is received, or the host has tried all HITs, and try the other IP addresses only after that. A host MAY also send multiple I1s in parallel, but sending such I1s MUST be rate limited to avoid flooding (as per Section 8.4.1 of [10]). Nikander & Laganier Expires August 21, 2005 [Page 18] Internet-Draft HIP DNS Extensions February 2005 8. Transition mechanisms During a transition period, to allows to store the HIP informations of a node in a DNS server which does not support the HIPHI and HIPRVS RRs, A and AAAA RRs MAY be overloaded. A HIT would typically be stored in a AAAA RR and a RVS in either a A or AAAA RR. If such a situation occurs, the overloaded RRs MUST be returned as the last items of the returned RRs set (A or AAAA), to avoid as most as possible conflicts with non-HIP IPv6 nodes. Nikander & Laganier Expires August 21, 2005 [Page 19] Internet-Draft HIP DNS Extensions February 2005 9. Security Considerations Though the security considerations of the HIP DNS extensions still need to be more investigated and documented, this section contains a description of the known threats involved with the usage of the HIP DNS extensions. In a manner similar to the IPSECKEY RR [14], the HIP DNS Extensions allows to provision two HIP nodes with the public keying material (HI) of their peer. These HIs will be subsequently used in a key exchange between the peers. Hence, the HIP DNS Extensions introduce the same kind of threats that IPSECKEY does, plus threats caused by the possibility given to a HIP node to initiate or accept a HIP exchange using "Opportunistic" or "Unpublished Initiator HI" modes. A HIP node SHOULD obtain both the HIPHI and HIPRVS RRs from a trusted party trough a secure channel insuring proper data integrity of the RRs. DNSSEC [3] provides such a secure channel. In the absence of a proper secure channel, both parties are vulnerable to MitM and DoS attacks, and unrelated parties might be subject to DoS attacks as well. These threats are described in the following sections. 9.1 Attacker tampering with an unsecure HIPHI RR The HIPHI RR contains public keying material in the form of the named peer's public key (the HI) and its secure hash (the HIT). Both of these are not sensitive to attacks where an adversary gains knowledge of them. However, an attacker that is able to mount an active attack on the DNS, i.e., tampers with this HIPHI RR (e.g., using DNS spoofing) is able to mount Man-in-the-Middle attacks on the cryptographic core of the eventual HIP exchange (responder's HIPHI and HIPRVS rewritten by the attacker). 9.2 Attacker tampering with an unsecure HIPRVS RR The HIPRVS RR contains a destination IP address where the named peer is reachable by an I1 (HIP Rendezvous Extensions IPSECKEY RR [13] ). Thus, an attacker able to tamper with this RRs is able to redirect I1 packets sent to the named peer to a chosen IP address, for DoS or MitM attacks. Note that this kind of attacks are not specific to HIP and exist independently to whether or not HIP and the HIPRVS RR are used. Such an attacker might tamper with A and AAAA RRs as well. An attacker might obviously use these two attacks in conjunction: It will replace the responder's HI and RVS IP address by its owns in a spoofed DNS packet sent to the initiator HI, then redirect all Nikander & Laganier Expires August 21, 2005 [Page 20] Internet-Draft HIP DNS Extensions February 2005 exchanged packets through him and mount a MitM on HIP. In this case HIP won't provide confidentiality nor initiator HI protection from eavesdroppers. 9.3 Opportunistic HIP A HIP initiator may not be aware of its peer's HI, and/or its HIT (e.g., because the DNS does not contains HIP material, or the resolver isn't HIP-enabled), and attempt an opportunistic HIP exchange towards its known IP address, filling the responder HIT field with zeros in the I1 header. Such an initiator is vulnerable to a MitM attack because it can't validate the HI and HIT contained in a replied R1. Hence, an implementation MAY choose not to use opportunistic mode. 9.4 Unpublished Initiator HI A HIP initiator may choose to use an unpublished HI, which is not stored in the DNS by means of a HIPHI RR. A responder associating with such an initiator knowingly risks a MitM attack because it cannot validate the initiator's HI. Hence, an implementation MAY choose not to use unpublished mode. 9.5 Hash and HITs Collisions As many cryptographic algorithm, some secure hashes (e.g. SHA1, used by HIP to generate a HIT from an HI) eventually become insecure, because an exploit has been found in which an attacker with a reasonable computation power breaks one of the security features of the hash (e.g., its supposed collision resistance). This is why a HIP end-node implementation SHOULD NOT authenticate its HIP peers based solely on a HIT retrieved from DNS, but SHOULD rather use HI-based authentication. Nikander & Laganier Expires August 21, 2005 [Page 21] Internet-Draft HIP DNS Extensions February 2005 10. IANA Considerations IANA needs to allocate two new RR type code for HIPHI and HIPRVS from the standard RR type space. IANA needs to open a new registry for the HIPHI RR HIT type. Defined types are: 0 No HIT is present 1 A Type 1 HIT is present 2 A Type 2 HIT is present 3-6 Unassigned 7 A HAA is present Adding new reservations requires IETF consensus RFC2434 [16]. IANA needs to open a new registry for the HIPHI RR HIT algorithm. Defined types are: 0 Reserved 1 SHA1 2-255 Unassigned Adding new reservations requires IETF consensus RFC2434 [16]. IANA does not need to open a new registry for the HIPHI RR type for public key algorithms because the HIPHI RR reuse 'algorithms types' defined for the IPSECKEY RR [14]. The presently defined numbers are given here only informally: 0 is reserved 1 is RSA 2 is DSA IANA does not need to open a new registry for the HIPRVS RR Rendezvous server type because the HIPHI RR reuse the 'gateway types' defined for the IPSECKEY RR [14]. The presently defined numbers are given here only informally: 0 is reserved 1 is IPv4 2 is IPv6 3 is a wire-encoded uncompressed domain name Nikander & Laganier Expires August 21, 2005 [Page 22] Internet-Draft HIP DNS Extensions February 2005 11. Acknowledgments As usual in the IETF, this document is the result of a collaboration between many people. The authors would like to thanks the author (Michael Richardson), contributors and reviewers of the IPSECKEY RR [14] specification, which this document was framed after. The authors would also like to thanks the following people, who have provided thoughtful and helpful discussions and/or suggestions, that have helped improving this document: Rob Austein, Hannu Flinck, Tom Henderson, Miika Komu, Andrew McGregor, Erik Nordmark, and Gabriel Montenegro. Some parts of this draft stem from [10]. Nikander & Laganier Expires August 21, 2005 [Page 23] Internet-Draft HIP DNS Extensions February 2005 12. References 12.1 Normative references [1] Mockapetris, P., "Domain names - concepts and facilities", STD 13, RFC 1034, November 1987. [2] Mockapetris, P., "Domain names - implementation and specification", STD 13, RFC 1035, November 1987. [3] Eastlake, D. and C. Kaufman, "Domain Name System Security Extensions", RFC 2065, January 1997. [4] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [5] Eastlake, D., "DSA KEYs and SIGs in the Domain Name System (DNS)", RFC 2536, March 1999. [6] Eastlake, D., "RSA/SHA-1 SIGs and RSA KEYs in the Domain Name System (DNS)", RFC 3110, May 2001. [7] Bush, R., Durand, A., Fink, B., Gudmundsson, O. and T. Hain, "Representing Internet Protocol version 6 (IPv6) Addresses in the Domain Name System (DNS)", RFC 3363, August 2002. [8] Josefsson, S., "The Base16, Base32, and Base64 Data Encodings", RFC 3548, July 2003. [9] Thomson, S., Huitema, C., Ksinant, V. and M. Souissi, "DNS Extensions to Support IP Version 6", RFC 3596, October 2003. [10] Moskowitz, R., Nikander, P. and P. Jokela, "Host Identity Protocol", draft-ietf-hip-base-01 (work in progress), October 2004. [11] Moskowitz, R. and P. Nikander, "Host Identity Protocol Architecture", draft-ietf-hip-arch-00 (work in progress), October 2004. [12] Nikander, P., "End-Host Mobility and Multi-Homing with Host Identity Protocol", draft-ietf-hip-mm-00 (work in progress), October 2004. [13] Laganier, J. and L. Eggert, "Host Identity Protocol (HIP) Rendezvous Extensions", draft-ietf-hip-rvs-00 (work in progress), October 2004. Nikander & Laganier Expires August 21, 2005 [Page 24] Internet-Draft HIP DNS Extensions February 2005 [14] Richardson, M., "A method for storing IPsec keying material in DNS", draft-ietf-ipseckey-rr-12 (work in progress), January 2005. 12.2 Informative references [15] Jokela, P., Moskowitz, R. and P. Nikander, "Using ESP transport format with HIP", draft-jokela-hip-esp-00 (work in progress), February 2005. [16] Narten, T. and H. Alvestrand, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 2434, October 1998. Authors' Addresses Pekka Nikander Ericsson Research Nomadic Lab JORVAS FIN-02420 FINLAND Phone: +358 9 299 1 EMail: pekka.nikander@nomadiclab.com Julien Laganier LIP (CNRS-INRIA-ENSL-UCBL) & Sun Labs (Sun Microsystems) 180, Avenue de l'Europe Saint Ismier CEDEX 38334 France Phone: +33 476 188 815 EMail: ju@sun.com Nikander & Laganier Expires August 21, 2005 [Page 25] Internet-Draft HIP DNS Extensions February 2005 Appendix A. Document Revision History +-----------+-------------------------------------------------------+ | Revision | Comments | +-----------+-------------------------------------------------------+ | 01 | Compared to draft-ietf-hip-dns-01: Removed HIP | | | rendezvous registration protocol. Removed references | | | to DNS. Added figures. Added text discussing multiple | | | HITs and IP. | | | | | 00 | Initial version as a HIP WG item. | +-----------+-------------------------------------------------------+ Nikander & Laganier Expires August 21, 2005 [Page 26] Internet-Draft HIP DNS Extensions February 2005 Intellectual Property Statement The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Disclaimer of Validity This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Copyright Statement Copyright (C) The Internet Society (2005). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. Acknowledgment Funding for the RFC Editor function is currently provided by the Internet Society. Nikander & Laganier Expires August 21, 2005 [Page 27]