8
Default Behavior both CC and CV mode
•BFD timer values are set
as follows
1.The
configured packet transmission is carried in “Desired Min TX
Interval field”
2.Timer and detect multiplier re-negotiation is
optional and disabled
by default
3.Active Role is default, passive is
optional
4.Bidirectional p2p settings:
“Required Min
RX Interval field” MUST be the same as “Desired Min TX Interval
field”
5. Unidirectional
p2p and p2mp session MUST set
the “Required
Min RX Interval field“ to 0
•The session will NOT reach UP if expected
timers values and
detect multiplier are not the same