Internet Engineering Task Force S. D'Antonio Internet-Draft University of Napoli Intended status: Standards Track "Parthenope" Expires: May 17, 2012 T. Zseby Fraunhofer Institute FOKUS C. Henke Technische Universitat Berlin L. Peluso University of Napoli November 14, 2011 Flow Selection Techniques draft-ietf-ipfix-flow-selection-tech-09.txt Abstract Flow selection is the process of selecting a subset of flows from all observed flows. The Flow Selection Process may be located at an observation point, or on an IPFIX Mediator. Flow selection reduces the effort of post-processing flow data and transferring Flow Records. This document describes motivations for flow selection and presents flow selection techniques. It provides an information model for configuring flow selection techniques and discusses what information about a flow selection process should be exported. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119]. Status of this Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on May 17, 2012. D'Antonio, et al. Expires May 17, 2012 [Page 1] Internet-Draft Flow Selection Techniques November 2011 Copyright Notice Copyright (c) 2011 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English. D'Antonio, et al. Expires May 17, 2012 [Page 2] Internet-Draft Flow Selection Techniques November 2011 Table of Contents 1. Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. Difference between Flow Selection and Packet Selection . . . . 7 4. Flow selection as a Function in the IPFIX Architecture . . . . 8 4.1. Flow selection during the Metering Process . . . . . . . . 10 4.2. Flow selection during the Exporting Process . . . . . . . 10 4.3. Flow selection as a function of the IPFIX Mediator . . . . 10 5. Flow Selection Techniques . . . . . . . . . . . . . . . . . . 11 5.1. Flow Filtering . . . . . . . . . . . . . . . . . . . . . . 11 5.1.1. Property Match Filtering . . . . . . . . . . . . . . . 11 5.1.2. Hash-based Flow Filtering . . . . . . . . . . . . . . 11 5.2. Flow Sampling . . . . . . . . . . . . . . . . . . . . . . 12 5.2.1. Systematic sampling . . . . . . . . . . . . . . . . . 12 5.2.2. Random Sampling . . . . . . . . . . . . . . . . . . . 12 5.3. Flow-state Dependent Flow Selection . . . . . . . . . . . 13 5.4. Flow-state Dependent Packet Selection . . . . . . . . . . 14 6. Configuration of Flow Selection Techniques . . . . . . . . . . 14 6.1. Flow Selection Parameters . . . . . . . . . . . . . . . . 16 6.2. Description of Flow-state Dependent Packet Selection . . . 18 7. Information Model for Flow Selection Configuration and Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . 18 7.1. FlowSelectorAlgorithm . . . . . . . . . . . . . . . . . . 19 7.2. flowSelectedOctetDeltaCount . . . . . . . . . . . . . . . 21 7.3. flowSelectedPacketDeltaCount . . . . . . . . . . . . . . . 21 7.4. flowSelectedFlowDeltaCount . . . . . . . . . . . . . . . . 21 7.5. selectorIDTotalFlowsObserved . . . . . . . . . . . . . . . 22 7.6. selectorIDTotalFlowsSelected . . . . . . . . . . . . . . . 22 7.7. samplingFlowInterval . . . . . . . . . . . . . . . . . . . 22 7.8. samplingFlowSpace . . . . . . . . . . . . . . . . . . . . 23 7.9. flowSamplingTimeInterval . . . . . . . . . . . . . . . . . 23 7.10. flowSamplingTimeSpace . . . . . . . . . . . . . . . . . . 23 7.11. hashFlowDomain . . . . . . . . . . . . . . . . . . . . . . 24 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 24 8.1. Registration of Information Elements . . . . . . . . . . . 24 8.2. Registration of Object Identifier . . . . . . . . . . . . 32 9. Security Considerations . . . . . . . . . . . . . . . . . . . 32 10. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 33 11. References . . . . . . . . . . . . . . . . . . . . . . . . . . 33 11.1. Normative References . . . . . . . . . . . . . . . . . . . 33 11.2. Informative References . . . . . . . . . . . . . . . . . . 33 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 34 D'Antonio, et al. Expires May 17, 2012 [Page 3] Internet-Draft Flow Selection Techniques November 2011 1. Scope This document describes flow selection techniques for network traffic measurements. A flow is defined as a set of packets with common properties as described in [RFC5101]. Flow selection can be done to limit the resource demands for capturing, storing, exporting and post-processing of Flow Records. It also can be used to select a particular set of flows that are of interest to a specific application. This document provides a categorization of flow selection techniques and describes configuration and reporting parameters for them. In order to be compliant with this document, at least one of the flow selection schemes MUST be implemented. That means that the configuration parameters as well as the reporting Information Elements for this particular scheme MUST be supported. This document also addresses configuration and reporting parameters for flow-state dependent packet selection as described in [RFC5475], although this technique is categorized as packet selection. The reason is, that flow-state dependent packet selection techniques often aim at the reduction of resources for flow capturing and flow processing. Furthermore, they were only briefly discussed in [RFC5475]. Therefore we included configuration and reporting considerations for such techniques in this document. 2. Terminology This document is consistent with the terminology introduced in [RFC5101], [RFC5470], [RFC5475] and [RFC3917]. As in [RFC5101] and [RFC5476], the first letter of each IPFIX-specific and PSAMP-specific term is capitalized along with the flow selection specific terms defined here. * Packet Classification Packet Classification is a process by which packets are mapped to specific Flow Records based on packet properties or external properties (e.g. interface). The properties (e.g. header information, packet content, AS number) make up the Flow Key. In case a Flow Record for a specific Flow Key already exists the Flow Record is updated, otherwise a new Flow Record is created. * Packet Aggregation Process In the IPFIX Metering Process the Packet Aggregation Process aggregates packet data into flow data and forms the Flow Records. After the aggregation step only the aggregated flow information is available. Information about individual packets is lost. D'Antonio, et al. Expires May 17, 2012 [Page 4] Internet-Draft Flow Selection Techniques November 2011 * Flow Selection Process A Flow Selection Process takes Flow Records as its input and selects a subset of this set as its output. A Flow Selection Process MAY run in several places within the IPFIX architecture. A Flow Selection Process MAY be part of an IPFIX Metering Process, Exporting Process or as an Intermediate Selection Process as defined for the IPFIX Mediator [RFC6183]. * Flow Selection State A Flow Selection Process SHOULD maintain state information for use by the Flow Selector. At a given time, the Flow Selection State may depend on flows and packets observed at and before that time, as well as other variables. Examples include: (i) sequence number of packets and accounted Flow Records; (ii) number of selected flows; (iii) number of observed flows; (iv) current flow cache occupancy; (v) flow specific counters, lower and upper bounds; (vi) flow selection timeout intervals. * Flow Selector A Flow Selector defines the action of a Flow Selection Process on a single flow of its input. The Flow Selector can make use of the following information in order to establish whether a flow has to be selected or not: (i) the content of the Flow Record; (ii) any state information related to the Metering Process or Exporting Process; (iii) any Flow Selection State that may be maintained by the Flow Selection Process. * Complete Flow A Complete Flow consists of all the packets that enter the Flow Selection Process within the flow time-out interval, and which belong to the same flow as defined by the flow definition in D'Antonio, et al. Expires May 17, 2012 [Page 5] Internet-Draft Flow Selection Techniques November 2011 [RFC5470]. For this definition only packets that arrive at the Flow Selection Process are considered. That means, packets that are not observed at the Flow Selection Process because of prior packet selection or packet loss are not considered as belonging to the Complete Flow. * Flow Filtering Flow Filtering selects flows based on a deterministic function on the Flow Record content, Flow Selection State, external properties (e.g. ingress interface) or external events (e.g violated Access Control List). If the relevant parts of the Flow Record content can already be observed at packet level (e.g. Flow Keys from packet header fields) Flow Filtering can be performed at packet level by Property Match Filtering as described in [RFC5475]. * Hash-based Flow Filtering Hash-based Flow Filtering is a deterministic flow filter function that selects flows based on a Hash Function. The Hash Function is calculated over parts of the Flow Record content or external properties which are called the Hash Domain. If the hash value falls into a predefined Hash Selection Range the flow is selected. Hash-based Flow Filtering can already applied at packet level, in which case the Hash Domain MUST contain the Flow Key of the packet. In case Hash-based Flow Filtering is used to select the same subset of flows at different observation points, the Hash Domain MUST comprise parts of the packet or flow thar are invariant on the packet/flow path. Also refer to the according Trajectory Sampling Application Example on packet level in [RFC5475] * Flow-state Dependent Flow Selection Flow-state Dependent Flow Selection is a selection function that selects or drops flows based on the current Flow Selection State. The selection can be either deterministic, random or non-uniform random. * Flow-state Dependent Packet Selection Flow-state Dependent Packet Selection is a selection function that selects or drops packets based on the current Flow Selection State. The selection can be either deterministic, random or non- uniform random. Flow-state Dependent Packet Selection can be used to prefer the selection of packets belonging to specific flows. For example the selection probability of packets belonging to flows that are already within the Flow Cache may be higher than D'Antonio, et al. Expires May 17, 2012 [Page 6] Internet-Draft Flow Selection Techniques November 2011 for packets that have not been recorded yet. * Flow Sampling Flow Sampling selects flows based on Flow Record sequence or arrival times (e.g. entry in flow cache, arrival time at Exporter or Mediator). The selection can be systematic (e.g. every n-th flow) or based on a random function (e.g. select each Flow Record with probability p, or randomly select n out of N Flow Records). 3. Difference between Flow Selection and Packet Selection Flow selection differs from packet selection described in [RFC5475]. Packet selection techniques consider packets as the basic element and the parent population consists of all packets observed at an observation point. In contrast to this the basic elements in flow selection are the flows. The parent population consists of all observed flows and the selection process operates on the flows. The major characteristics of flow selection are the following: - Flow selection takes flows as basic elements. For packet selection, packets are considered as basic elements. - Flow selection can only take place after Packet Classification, because the classification rules determine to which flow a packet belongs. Packet selection can be applied before and after Packet Classification. - Flow selection operates on Complete Flows. That means that after the Flow Selection Process either all packets of the flow are kept or all packets of the flow are discarded. That means that if the flow selection is preceded by a packet selection process the Complete Flow consists only of the packets that were not discarded during the packet selection. There are some techniques that are difficult to unambiguously categorize into one of the categories. Here we give some guidance how to categorize such techniques: - Techniques that can be considered as both packet and flow selection: some packet selection techniques result in the selection of Complete Flows and therefore can be considered as packet or as flow selection at the same time. An example is Property Match Filtering of all packets to a specific destination address. If flows are defined based on destination addresses, such a packet selection also results in a flow selection and can be considered as packet or flow D'Antonio, et al. Expires May 17, 2012 [Page 7] Internet-Draft Flow Selection Techniques November 2011 selection. - Flow-state Dependent Packet Selection (as described in [RFC5475]): there exist techniques that select packets based on the flow state, e.g. based on the number of already observed packets belonging to the flow. Examples of these techniques from the literature are "Sample and Hold" [EsVa01] "Fast Filtered Sampling" [MSZC10] or the "Sticky Sampling" algorithm presented in [MaMo02]. Such techniques can be used to influence which flows are captured (e.g. increase the selection of packets belonging to large flows) and reduce the number of flows that need to be stored in the flow cache. Nevertheless, such techniques do not necessarily select Complete Flows, because they do not ensure that all packets of a selected flow are captured. Therefore Flow-state Dependent Packet Selection methods that do not ensure that either all or no packets of a flow are selected strictly speaking have to be considered as packet selection techniques and not as flow selection techniques. 4. Flow selection as a Function in the IPFIX Architecture Figure 1 shows the IPFIX reference model as defined in [RFC5470] and shows the Packet Classification and Packet Aggregation Process in the Metering Process. D'Antonio, et al. Expires May 17, 2012 [Page 8] Internet-Draft Flow Selection Techniques November 2011 Packet(s) coming in to Observation Point(s) | | v v +----------------+---------------------------+ +-----+-------+ | Metering Process | | | | | | | | packet header capturing | | | | | |...| Metering | | timestamping | | Process N | | | | | | | packet sampling | | | | | | | | | (packet classification) | | | | | | | | | packet filtering* | | | | | | | | | (packet aggregation)* | | | | | | | | +--------|-----------------------------------+ +-----|-------+ Flow Records Flow Records | | +----------------------+----------------------+ | +----------------------|-----------------+ | Exporting Process* | +----------------------+-----------------+ | IPFIX (Flow Records) v +-------------------------|-----------------------+ | IPFIX Mediator | | | v | | Collecting Process(es) | | | | | Intermediate Flow Selection Process (*) | | | | | Exporting Process(es) (*) | +-------------------------|-----------------------+ v IPFIX (*) indicates where flow selection can take place. Figure 1: Flow selection in the IPFIX Architecture In contrast to packet selection, flow selection is always applied after the packets are classified into flows. Flows can be selected at different stages of the measurement chain: D'Antonio, et al. Expires May 17, 2012 [Page 9] Internet-Draft Flow Selection Techniques November 2011 1. during the Metering Process 2. during Exporting Process(es) 3. during an Intermediate Selection Process on a Mediator 4.1. Flow selection during the Metering Process In the Packet Aggregation Process the packet information is used to update the Flow Records in the flow cache. Flow selection that is applied before aggregation equals a packet selection process. The flow still consists of individual packets. Those are then selected based on the classification information, i.e. based on the flow they belong to. Flow selection before aggregation can be based on the fields of the Flow Key (also on a hash value over these fields), but not based on characteristics that are only available after packet aggregation (e.g. flow size, flow duration). Flow selection during the Metering Process is applied to reduce resources for all succeeding processes or to select specific flows of interest in case such flow characteristics are already observable at packet level (e.g. flows to specific IP addresses). In contrast, Flow-state Dependent Packet Selection is a packet selection method, because it does not necessarily select Complete Flows. 4.2. Flow selection during the Exporting Process The Flow Selection Process at the Exporter is similar to an Intermediate Selection Process as described in [RFC6183] and works on Flow records. Flow selection during the Exporting Process can therefore also depend on flow characteristics that are only visible after the aggregation of packets, such as flow size and flow duration. The Exporting Process may implement policies for exporting only a subset of the Flow Records which have been stored in the system memory in order to unload flow export and flow post- processing. Flow selection during the Exporting Process may select only the subset of Flow Records which are of interest to the users application, or select only as many Flow Records as can be handled by the available resources (e.g. limited export link capacity). 4.3. Flow selection as a function of the IPFIX Mediator As shown in Figure 1, flow selection can be performed as an Intermediate Process within an IPFIX Mediator [RFC6183]. The Intermediate Selection Process takes Flow Record stream as its input and selects Flow Records from a sequence based upon criteria- evaluated record values. The Intermediate Selection Process can again apply a flow selection technique to obtain flows of interest to the application. Further, the Intermediate Selection Process can D'Antonio, et al. Expires May 17, 2012 [Page 10] Internet-Draft Flow Selection Techniques November 2011 base its selection decision on the correlation of data from different observation points, e.g. by only selecting flows that were at least recorded on two observation points. 5. Flow Selection Techniques A flow selection technique selects either all or none of the packets of a flow, otherwise the technique has to be considered as packet selection. We distinguish between Flow Filtering and Flow Sampling. 5.1. Flow Filtering Flow Filtering is a deterministic function on the IPFIX Flow Record content. If the relevant flow characteristics are already observable at packet level (e.g. Flow Keys), Flow Filtering can be applied before aggregation at packet level. 5.1.1. Property Match Filtering Flow Filtering can be performed similarly to Property Match Filtering for packet selection described in [RFC5475]. The difference is that, instead of packet fields, Flow Record fields are here used to derive the selection decision. Property Match Filtering is typically used to select a specific subset of the flows that are of interest to a particular application (e.g. all flows to a specific destination, all large flows, etc.). Properties on which the filtering is based can be for example Flow Keys, the flow size in bytes, the number of packets in the flow, the observation time of the first or last packet, or the maximum packet length. The selection criteria can be a specific value or an interval. Property Match Filtering can be applied during the Metering Process if the properties are already observable at the packet level (e.g. Flow Key fields). There are content-based Property Match Filtering techniques that require a computation on the current flow cache. An example is the selection of the largest flows or a percentage of flows with the longest lifetime. This type of Property Match Filtering is also used in flow selection techniques that react to external events (e.g. resource constraint). For example when the flow cache is full, the Flow Record with the lowest flow volume per current flow life time may be deleted. 5.1.2. Hash-based Flow Filtering Hash-based Flow Filtering uses a Hash Function h to map the Flow Key c onto a Hash Range R. A flow is selected if the hash value h(c) is within the Hash Selection Range S, which is a subset of R. Hash-based D'Antonio, et al. Expires May 17, 2012 [Page 11] Internet-Draft Flow Selection Techniques November 2011 Flow Filtering can be used to emulate a random sampling process but still enable the correlation between selected flow subsets at different observation points. Hash-based Flow Filtering is similar to Hash-based Packet Selection, and in fact is identical when Hash- based Packet Selection uses the Flow Key that defines the flow as the hash input. Nevertheless there MAY be the incentive to apply Hash- based Flow Filtering not on the packet level during the Metering Process, for example when the size of the selection range and therefore the sampling probability is dependent on the number of observed flows. 5.2. Flow Sampling Flow Sampling operates on Flow Record sequence or arrival times. It can use either a systematic or a random function for the selection process. Flow Sampling usually aims at the selection of a representative subset of all flows in order to estimate characteristics of the whole set (e.g. mean flow size in the network). 5.2.1. Systematic sampling Systematic sampling is a deterministic selection function. Systematic sampling may be a periodic selection of the N-th Flow Record which arrives at the Exporting or Intermediate Selection Process. Systematic sampling MAY BE applied during the Metering Process. An example would be to create, besides the Flow cache of selected flows, an additional data structure that saves the Flow Keys of the flows that are not selected. The selection of a flow would then be based on the first packet of a flow. Everytime a packet belonging to a new flow (which is neither in the data structure of the selected or not selected flows) arrives at the measurement point, a counter is increased. In case the counter is increased to a multiple of N a new flow cache entry is created, and in case the counter is not a multiple of N the Flow Key is added to the data structure for not selected flows. Systematic sampling can also be time-based. Time-based systematic sampling is applied by only creating flows that are observed between time-based start and stop triggers. The time interval may be applied at packet level during the Metering Process or after aggregation on flow level, e.g. by selecting a flow arriving at the Exporting Process every n seconds. 5.2.2. Random Sampling Random flow sampling is based on a random process which requires the calculation of random numbers. One can differentiate between n-out-N D'Antonio, et al. Expires May 17, 2012 [Page 12] Internet-Draft Flow Selection Techniques November 2011 and probabilistic flow sampling. 5.2.2.1. n-out-of-N Flow Sampling In n-out-of-N Sampling, n elements are selected out of the parent population that consists of N elements. One example would be to generate n different random numbers in the range [1,N] and select all flows that have a flow position equal to one of the random numbers. 5.2.2.2. Probabilistic Flow Sampling In probabilistic Sampling, the decision whether or not a flow is selected is made in accordance with a predefined selection probability. For probabilistic Sampling, the Sample Size can vary for different trials. The selection probability does not necessarily have to be the same for each flow. Therefore, we distinguish between uniform probabilistic sampling (with the same selection probability for all flows) and non-uniform probabilistic sampling (where the selection probability can vary for different flows). For non-uniform probabilistic Flow Sampling the sampling probability may be adjusted according to the Flow Record content. An example would be to increase the selection probability of large volume flows over small volume flows as described in the Smart Sampling technique [DuLT01]. 5.3. Flow-state Dependent Flow Selection Flow-state Dependent Flow Selection can be a deterministic or random flow selection process based on the Flow Record content and the flow state which may be kept additionally for each of the flows. External processes may update counters, bounds and timers for each of the Flow Records and the Flow Selection Process utilises this information for the selection decision. A review of Flow-state Dependent Flow Selection techniques that aim at the selection of the most frequent items by keeping additional flow state information can be found in [CoHa08]. Flow-state Dependent Flow Selection can only be applied after packet aggregation, when a packet has been assigned to a flow. The selection process then decides based upon the flow state for each flow if it is kept in the flow cache or not. Two Flow State Dependent Flow Selection Algorithms are here described: The frequent algorithm [KaPS03] is a technique that aims at the selection of all flows that at least exceed a 1/k fraction of the Observed Packet Stream. The algorithm has only a flow cache of size k-1 and each flow in the cache has an additional counter. The counter is incremented each time a packet belonging to the flow in the flow cache is observed. In case the observed packet does not belong to any flow all counters are decremented and if any of the flow counters has a value of zero the flow is replaced with a flow D'Antonio, et al. Expires May 17, 2012 [Page 13] Internet-Draft Flow Selection Techniques November 2011 formed from the new packet. Lossy counting is a selection technique that identifies all flows whose packet count exceeds a certain percentage of the whole observed packet stream (e.g. 5% of all packets) with a certain estimation error e. Lossy counting separates the observed packet stream in windows of size N=1/e, where N is an amount of consecutive packets. For each observed flow an additional counter will be held in the flow state. The counter is incremented each time a packet belonging to the flow is observed and all counters are decremented at the end of each window and all flows with a counter of zero are removed from the flow cache. 5.4. Flow-state Dependent Packet Selection Flow-state Dependent Packet Selection is not a flow selection technique but a packet selection technique. Nevertheless we will describe configuration and reporting parameters for this technique in this document. An example is the "Sample and Hold" algorithm [EsVa01] that tries to prefer large volume flows in the selection. When a packet arrives it is selected when a Flow Record for this packet already exists. In case there is no Flow Record, the packet is selected by a certain probability that is dependent on the packet size. 6. Configuration of Flow Selection Techniques This section describes the configuration parameters of the flow selection techniques presented above. It provides the basis for an information model to be adopted in order to configure the Flow Selection Process within an IPFIX Device. The actual information model with the Information Elements (IEs) for the configuration is described together with the reporting IEs in section 7. The following table gives an overview of the defined selection techniques, where they can be applied and what their input parameters are. Depending on where the flow selection techniques are applied different input parameters can be configured. Overview of Flow Selection Techniques: D'Antonio, et al. Expires May 17, 2012 [Page 14] Internet-Draft Flow Selection Techniques November 2011 +------------------+-----------------+------------------------------+ | Location | Selection | Selection Input | | | Method | | +------------------+-----------------+------------------------------+ | During the | Flow-state | packet sampling | | Metering Process | Dependent | probabilities, Flow | | based on Packets | Packet | Selection State, packet | | | Selection | properties | +------------------+-----------------+------------------------------+ | | Property Match | Flow record IEs, Selection | | | Flow Filtering | Interval | +------------------+-----------------+------------------------------+ | | Hash-based Flow | selection range, Hash | | | Filtering | Function, Flow Key, (seed) | +------------------+-----------------+------------------------------+ | | Time-based | flow position (derived from | | | Systematic Flow | arrival time of packets), | | | Sampling | flow selection state | +------------------+-----------------+------------------------------+ | | Sequence-based | flow position (derived from | | | Systematic Flow | packet position), flow | | | Sampling | selection state | +------------------+-----------------+------------------------------+ | | Random Flow | random number generator or | | | Sampling | list and packet position, | | | | flow state | +------------------+-----------------+------------------------------+ | Exporting / | Property Match | Flow Record content, filter | | Intermediate | Flow Filtering | function | | Selection | | | | Process | | | +------------------+-----------------+------------------------------+ | | Hash-based Flow | selection range, Hash | | | Filtering | Function, hash input (Flow | | | | Keys and other flow | | | | properties) | +------------------+-----------------+------------------------------+ | | Flow-state | flow state parameters, | | | Dependent Flow | random number generator or | | | Selection | list | +------------------+-----------------+------------------------------+ | | Time-based | flow arrival time, flow | | | Systematic Flow | state | | | Sampling | | +------------------+-----------------+------------------------------+ | | Sequence-based | flow position, flow state | | | Systematic Flow | | | | Sampling | | D'Antonio, et al. Expires May 17, 2012 [Page 15] Internet-Draft Flow Selection Techniques November 2011 | | Random Flow | random number generator or | | | Sampling | list and flow position, flow | | | | state | +------------------+-----------------+------------------------------+ 6.1. Flow Selection Parameters In this section, we define what parameters are required to describe the most common Flow Selection techniques. Flow Selection Parameters: For Property Match Filtering: - Information Element as specified in [iana-ipfix-assignments]): Specifies the Information Element which is used as the property in the filter expression. - Selection Value or Value Interval: Specifies the value or interval of the filter expression. Packets and Flow Record that have a value equal to the Selection Value or within the Interval will be selected. For Hash-based Flow Filtering: - Hash Domain: Specifies the bits from the packet or flow which are taken as the hash input to the Hash Function. - Hash Function: Specifies the name of the Hash Function that is used to calculate the hash value. Possible Hash Functions are BOB, IPSX, CRC-32 - Hash Selection Range: Flows that have a hash value within the Hash Selection Range are selected. The Hash Selection Range can be a value interval or arbitrary hash values within the Hash Range of the Hash Function. - Random Seed or Initializer Value: Some Hash Functions require an initializing value. In order to make the selection decision more secure one can choose a random seed that configures the hash function. For Flow-state Dependent Flow Selection: D'Antonio, et al. Expires May 17, 2012 [Page 16] Internet-Draft Flow Selection Techniques November 2011 - frequency threshold: Specifies the frequency threshold s for flow state dependent flow selection techniques that try to find the most frequent items within a dataset. All flows which exceed the defined threshold will be selected. - accuracy parameter: specifies the accuracy parameter e for techniques that deal with the frequent items problems. The accuracy parameter defines the maximum error, i.e. no flows that have a true frequency less than ( s - e) N are selected, where s is the frequency threshold and N is the total number of packets. The above list of parameters for Flow-state Dependent Flow Selection techniques is suitable for the presented frequent item and lossy counting algorithms. Nevertheless a variety of techniques exist with very specific parameters which are not defined here. For Systematic time-based Flow Sampling: - Interval length (in usec) Defines the length of the sampling interval during which flows are selected. - Spacing (in usec) The spacing parameter defines the spacing in usec between the end of one sampling interval and the start of the next succeeding interval. For Systematic count-based Flow Sampling: - Interval length Defines the number of flows that are selected within the sampling interval. - Spacing The spacing parameter defines the spacing in number of observed flows between the end of one sampling interval and the start of the next succeeding interval. For random n-out-of-N Flow Sampling: - Population Size N The Population Size N is the number of all flows in the Population from which the sample is drawn. D'Antonio, et al. Expires May 17, 2012 [Page 17] Internet-Draft Flow Selection Techniques November 2011 - Sampling Size n The sampling size n is the number of flows that are randomly drawn from the population N. For probabilistic Flow Sampling: - Sampling probability p The sampling probability p defines the probability by which each of the observed flows is selected. 6.2. Description of Flow-state Dependent Packet Selection The configuration of Flow-state Dependent Packet Selection has not been described in [RFC5475] therefore the parameters are defined here: For Flow-state Dependent Packet Selection: - packet selection probability per possible flow state interval Defines multiple {flow interval, packet selection probability} value pairs that configure the sampling probability depending on the current flow state. - additional parameters For the configuration of flow state dependent packet selection additional parameters or packet properties may be required, e.g. the packet size ([EsVa01]) 7. Information Model for Flow Selection Configuration and Reporting In this section we describe Information Elements (IEs) that SHOULD be exported by a flow selection process in order to support the interpretation of measurement results from flow measurements where only some flows are selected. The information is mainly used to report how many packets and flows have been observed in total and how many of them were selected. This helps for instance to calculate the Attained Selection Fraction (see also [RFC5476]), which is an important parameter to provide an accuracy statement. The IEs can provide reporting information about Flow Records, packets or bytes. The reported metrics are total number of elements and the number of selected elements. From this the number of dropped elements can be derived. All counters SHOULD be exported and reset when a new measurement interval starts. List of Flow Selection Information Elements: D'Antonio, et al. Expires May 17, 2012 [Page 18] Internet-Draft Flow Selection Techniques November 2011 +------+-------------------------+-------+--------------------------+ | ID | Name | ID | Name | +------+-------------------------+-------+--------------------------+ | 301 | selectionSequenceID | 302 | selectorID | +------+-------------------------+-------+--------------------------+ | TBD1 | FlowSelectorAlgorithm | 1 | octetDeltaCount | +------+-------------------------+-------+--------------------------+ | TBD2 | flowSelectedOctetDeltaC | 2 | PacketDeltaCount | | | ount | | | +------+-------------------------+-------+--------------------------+ | TBD3 | flowSelectedPacketDelta | 3 | originalFlowsPresent | | | Count | | | +------+-------------------------+-------+--------------------------+ | TBD4 | flowSelectedFlowDeltaCo | TBD5 | selectorIDTotalFlowsObse | | | unt | | rved | +------+-------------------------+-------+--------------------------+ | TBD6 | selectorIDTotalFlowsSel | TBD7 | samplingFlowInterval | | | ected | | | +------+-------------------------+-------+--------------------------+ | TBD8 | samplingFlowSpace | 309 | samplingSize | +------+-------------------------+-------+--------------------------+ | 310 | samplingPopulation | 311 | samplingProbability | +------+-------------------------+-------+--------------------------+ | TBD9 | flowSamplingTimeInterva | TBD10 | flowSamplingTimeSpace | | | l | | | +------+-------------------------+-------+--------------------------+ | 326 | digestHashValue | TBD11 | hashFlowOffset | +------+-------------------------+-------+--------------------------+ | TBD1 | hashFlowSize | 329 | hashOutputRangeMin | | 2 | | | | +------+-------------------------+-------+--------------------------+ | 330 | hashOutputRangeMax | 331 | hashSelectedRangeMin | +------+-------------------------+-------+--------------------------+ | 332 | hashSelectedRangeMax | 333 | hashDigestOutput | +------+-------------------------+-------+--------------------------+ | 334 | hashInitialiserValue | 320 | absoluteError | +------+-------------------------+-------+--------------------------+ | 321 | relativeError | 336 | upperCILimit | +------+-------------------------+-------+--------------------------+ | 337 | lowerCILimit | 338 | confidenceLevel | +------+-------------------------+-------+--------------------------+ 7.1. FlowSelectorAlgorithm Description: This Information Element identifies the flow selection method(e.g., Filtering, Sampling) that is applied by the Flow D'Antonio, et al. Expires May 17, 2012 [Page 19] Internet-Draft Flow Selection Techniques November 2011 Selection Process. Most of these methods have parameters as decribed in Section 6. Further Information Elements are needed to fully specify packet selection with these methods and all their parameters. Further method identifiers may be added to the list below. It might be necessary to define new Information Elements to specify their parameters. The flowSelectorAlgorithm registry is maintained by IANA. New assignments for the registry will be administered by IANA and are subject to Expert Review [RFC5226]. The registry can be updated when specifications of the new method(s) and any new Information Elements are provided. +----+------------------------+--------------------------+ | ID | Method | Parameters | +----+------------------------+--------------------------+ | 1 | Systematic count-based | flowSamplingInterval | | | Sampling | flowSamplingSpace | +----+------------------------+--------------------------+ | 2 | Systematic time-based | flowSamplingTimeInterval | | | Sampling | flowSamplingTimeSpace | +----+------------------------+--------------------------+ | 3 | Random n-out-of-N | samplingSize | | | Sampling | samplingPopulation | +----+------------------------+--------------------------+ | 4 | Uniform probabilistic | samplingProbability | | | Sampling | | +----+------------------------+--------------------------+ | 5 | Property Match | Information Element | | | Filtering | Value Range | +----+------------------------+--------------------------+ | Hash-based Filtering | hashInitialiserValue | +----+------------------------+ hashFlowDomain | | 6 | using BOB | hashSelectedRangeMin | +----+------------------------+ hashSelectedRangeMax | | 7 | using IPSX | hashOutputRangeMin | +----+------------------------+ hashOutputRangeMax | | 8 | using CRC | | +----+------------------------+--------------------------+ | 9 | Flow State Dependent | No agreed Parameters | | | Flow Selection | | +----+------------------------+--------------------------+ Abstract Data Type: unsigned16 ElementId: TBD1 Data Type Semantics: identifier D'Antonio, et al. Expires May 17, 2012 [Page 20] Internet-Draft Flow Selection Techniques November 2011 Status: Proposed 7.2. flowSelectedOctetDeltaCount Description: This Information Element specifies the volume in octets of all flows that are selected during the Flow Selection Process since the previous report. Abstract Data Type: unsigned64 ElementId: TBD2 Units: Octets Status: Proposed 7.3. flowSelectedPacketDeltaCount Description: This Information Element specifies the volume in packets of all flows that were selected during the Flow Selection Process since the previous report. Abstract Data Type: unsigned64 ElementId: TBD3 Units: Packets Status: Proposed 7.4. flowSelectedFlowDeltaCount Description: This Information Element specifies the number of Flows that were selected during the Flow Selection Process since the last report. Abstract Data Type: unsigned64 ElementId: TBD4 Units: Flows Status: Proposed D'Antonio, et al. Expires May 17, 2012 [Page 21] Internet-Draft Flow Selection Techniques November 2011 7.5. selectorIDTotalFlowsObserved Description: This Information Element specifies the total number of flows observed by a Selector, for a specific value of SelectorId. This Information Element should be used in an Options Template scoped to the observation to which it refers. See Section 3.4.2.1 of the IPFIX protocol document [RFC5101] . Abstract Data Type: unsigned64 ElementId: TBD5 Units: Flows Status: Proposed 7.6. selectorIDTotalFlowsSelected Description: This Information Element specifies the total number of flows selected by a Selector, for a specific value of SelectorId. This Information Element should be used in an Options Template scoped to the observation to which it refers. See Section 3.4.2.1 of the IPFIX protocol document [RFC5101]. Abstract Data Type: unsigned64 ElementId: TBD6 Units: Flows Status: Proposed 7.7. samplingFlowInterval Description: This Information Element specifies the number of flows that are consecutively sampled. A value of 100 means that 100 consecutive flows are sampled. For example, this Information Element may be used to describe the configuration of a systematic count-based Sampling Selector. Abstract Data Type: unsigned32 D'Antonio, et al. Expires May 17, 2012 [Page 22] Internet-Draft Flow Selection Techniques November 2011 ElementId: TBD7 Units: Flows Status: Proposed 7.8. samplingFlowSpace Description: This Information Element specifies the number of flows between two "samplingFlowInterval"s. A value of 100 means that the next interval starts 100 flows (which are not sampled) after the current "samplingFlowInterval" is over. For example, this Information Element may be used to describe the configuration of a systematic count-based Sampling Selector. Abstract Data Type: unsigned32 ElementId: TBD8 Units: Flows Status: Proposed 7.9. flowSamplingTimeInterval Description: This Information Element specifies the time interval in microseconds during which all arriving flows are sampled. For example, this Information Element may be used to describe the configuration of a systematic time-based Sampling Selector. Abstract Data Type: unsigned32 ElementId: TBD9 Units: microseconds Status: Proposed 7.10. flowSamplingTimeSpace Description: This Information Element specifies the time interval in microseconds between two "flowSamplingTimeInterval"s. A value of D'Antonio, et al. Expires May 17, 2012 [Page 23] Internet-Draft Flow Selection Techniques November 2011 100 means that the next interval starts 100 microseconds (during which no flows are sampled) after the current "flowsamplingTimeInterval" is over. For example, this Information Element may used to describe the configuration of a systematic time-based Sampling Selector. Abstract Data Type: unsigned32 ElementId: TBD10 Units: microseconds Status: Proposed 7.11. hashFlowDomain Description: This Information Element specifies the Information Elements that are used by the Hash-based flow Selection Selector as the Hash Domain. Abstract Data Type: unsigned16 ElementId: TBD11 Data Type Semantics: identifier Status: Proposed 8. IANA Considerations 8.1. Registration of Information Elements IANA will register the following IEs in the IPFIX Information Elements registry at http://www.iana.org/assignments/ipfix/ipfix.xml: D'Antonio, et al. Expires May 17, 2012 [Page 24] Internet-Draft Flow Selection Techniques November 2011 +-----+----------------+--------+---------+-------+-----------------+ | Val | Name | Data | Data | Statu | Description | | ue | | Type | Type | s | | | | | | Semanti | | | | | | | cs | | | +-----+----------------+--------+---------+-------+-----------------+ | 1 | FlowSelectorAl | unsign | identif | Propo | This | | | gorithm | ed16 | ier | sed | Information | | | | | | | Element | | | | | | | identifies the | | | | | | | flow selection | | | | | | | method(e.g., | | | | | | | Filtering, | | | | | | | Sampling) that | | | | | | | is applied by | | | | | | | the Flow | | | | | | | Selection | | | | | | | Process | +-----+----------------+--------+---------+-------+-----------------+ | 2 | FlowSelectedOc | unsign | Octets | Propo | This | | | tetDeltaCount | ed64 | | sed | Information | | | | | | | Element | | | | | | | specifies the | | | | | | | volume in | | | | | | | octets of all | | | | | | | flows that are | | | | | | | selected during | | | | | | | the Flow | | | | | | | Selection | | | | | | | Process since | | | | | | | the previous | | | | | | | report. | +-----+----------------+--------+---------+-------+-----------------+ | 3 | flowSelectedPa | unsign | Packets | Propo | This | | | cketDeltaCount | ed64 | | sed | Information | | | | | | | Element | | | | | | | specifies the | | | | | | | volume in | | | | | | | packets of all | | | | | | | flows that were | | | | | | | selected during | | | | | | | the Flow | | | | | | | Selection | | | | | | | Process since | | | | | | | the previous | | | | | | | report. | +-----+----------------+--------+---------+-------+-----------------+ D'Antonio, et al. Expires May 17, 2012 [Page 25] Internet-Draft Flow Selection Techniques November 2011 +-----+----------------+--------+---------+-------+-----------------+ | 4 | flowSelectedFl | unsign | Flows | Propo | This | | | owDeltaCount | ed64 | | sed | Information | | | | | | | Element | | | | | | | specifies the | | | | | | | number of Flows | | | | | | | that were | | | | | | | selected during | | | | | | | the Flow | | | | | | | Selection | | | | | | | Process since | | | | | | | the last | | | | | | | report. | +-----+----------------+--------+---------+-------+-----------------+ | 5 | selectorIDTota | unsign | Flows | Propo | This | | | lFlowsObserved | ed64 | | sed | Information | | | | | | | Element | | | | | | | specifies the | | | | | | | total number of | | | | | | | flows observed | | | | | | | by a Selector, | | | | | | | for a specific | | | | | | | value of | | | | | | | SelectorId. | | | | | | | This | | | | | | | Information | | | | | | | Element should | | | | | | | be used in an | | | | | | | Options | | | | | | | Template scoped | | | | | | | to the | | | | | | | observation to | | | | | | | which it | | | | | | | refers. See | | | | | | | Section 3.4.2.1 | | | | | | | of the IPFIX | | | | | | | protocol | | | | | | | document | | | | | | | [RFC5101] | +-----+----------------+--------+---------+-------+-----------------+ D'Antonio, et al. Expires May 17, 2012 [Page 26] Internet-Draft Flow Selection Techniques November 2011 +-----+----------------+--------+---------+-------+-----------------+ | 6 | selectorIDTota | unsign | Flows | Propo | This | | | lFlowsSelected | ed64 | | sed | Information | | | | | | | Element | | | | | | | specifies the | | | | | | | total number of | | | | | | | flows selected | | | | | | | by a Selector, | | | | | | | for a specific | | | | | | | value of | | | | | | | SelectorId. | | | | | | | This | | | | | | | Information | | | | | | | Element should | | | | | | | be used in an | | | | | | | Options | | | | | | | Template scoped | | | | | | | to the | | | | | | | observation to | | | | | | | which it | | | | | | | refers. See | | | | | | | Section 3.4.2.1 | | | | | | | of the IPFIX | | | | | | | protocol | | | | | | | document | | | | | | | [RFC5101]. | +-----+----------------+--------+---------+-------+-----------------+ D'Antonio, et al. Expires May 17, 2012 [Page 27] Internet-Draft Flow Selection Techniques November 2011 +-----+----------------+--------+---------+-------+-----------------+ | 7 | samplingFlowIn | unsign | Flows | Propo | This | | | terval | ed32 | | sed | Information | | | | | | | Element | | | | | | | specifies the | | | | | | | number of flows | | | | | | | that are | | | | | | | consecutively | | | | | | | sampled. A | | | | | | | value of 100 | | | | | | | means that 100 | | | | | | | consecutive | | | | | | | flows are | | | | | | | sampled. For | | | | | | | example, this | | | | | | | Information | | | | | | | Element may be | | | | | | | used to | | | | | | | describe the | | | | | | | configuration | | | | | | | of a systematic | | | | | | | count-based | | | | | | | Sampling | | | | | | | Selector. | +-----+----------------+--------+---------+-------+-----------------+ D'Antonio, et al. Expires May 17, 2012 [Page 28] Internet-Draft Flow Selection Techniques November 2011 +-----+----------------+--------+---------+-------+-----------------+ | 8 | samplingFlowSp | unsign | Flows | Propo | This | | | ace | ed32 | | sed | Information | | | | | | | Element | | | | | | | specifies the | | | | | | | number of flows | | | | | | | between two | | | | | | | "samplingFlowIn | | | | | | | terval"s. A | | | | | | | value of 100 | | | | | | | means that the | | | | | | | next interval | | | | | | | starts 100 | | | | | | | flows (which | | | | | | | are not | | | | | | | sampled) after | | | | | | | the current | | | | | | | "samplingFlowI | | | | | | | nterval" is ove | | | | | | | r.For example, | | | | | | | this | | | | | | | Information | | | | | | | Element may b | | | | | | | e used to | | | | | | | describe the | | | | | | | configuration | | | | | | | of a systemat | | | | | | | iccount-based | | | | | | | Sampling | | | | | | | Selector. | +-----+----------------+--------+---------+-------+-----------------+ D'Antonio, et al. Expires May 17, 2012 [Page 29] Internet-Draft Flow Selection Techniques November 2011 +-----+----------------+--------+---------+-------+-----------------+ | 9 | flowSamplingTi | unsign | microse | Propo | This | | | meInterval | ed32 | conds | sed | Information | | | | | | | Element | | | | | | | specifies the | | | | | | | time interval | | | | | | | in microseconds | | | | | | | during which | | | | | | | all arriving | | | | | | | flows are | | | | | | | sampled. For | | | | | | | example, this | | | | | | | Information | | | | | | | Element may be | | | | | | | used to | | | | | | | describe the | | | | | | | configuration | | | | | | | of a systematic | | | | | | | time-based | | | | | | | Sampling | | | | | | | Selector. | +-----+----------------+--------+---------+-------+-----------------+ D'Antonio, et al. Expires May 17, 2012 [Page 30] Internet-Draft Flow Selection Techniques November 2011 +-----+----------------+--------+---------+-------+-----------------+ | 10 | flowSamplingTi | unsign | microse | Propo | This | | | meSpace | ed32 | conds | sed | Information | | | | | | | Element | | | | | | | specifies the | | | | | | | time interval | | | | | | | in microseconds | | | | | | | between two | | | | | | | "flowSamplingTi | | | | | | | meInterval"s. | | | | | | | Avalue of 100 | | | | | | | means that the | | | | | | | next interval | | | | | | | starts 100 | | | | | | | microseconds | | | | | | | (during which | | | | | | | no flows are | | | | | | | sampled) after | | | | | | | the current | | | | | | | "flowsamplingT | | | | | | | imeInterval" is | | | | | | | over. For | | | | | | | example, this | | | | | | | Information | | | | | | | Element may | | | | | | | used to | | | | | | | describe the | | | | | | | configuration | | | | | | | of a systemat | | | | | | | ictime-based | | | | | | | Sampling | | | | | | | Selector. | +-----+----------------+--------+---------+-------+-----------------+ | 11 | hashFlowDomain | unsign | identif | Propo | This | | | | ed16 | ier | sed | Information | | | | | | | Element | | | | | | | specifies the | | | | | | | Information | | | | | | | Elements that | | | | | | | are used by the | | | | | | | Hash-based flow | | | | | | | Selection | | | | | | | Selector as the | | | | | | | Hash Domain. | +-----+----------------+--------+---------+-------+-----------------+ D'Antonio, et al. Expires May 17, 2012 [Page 31] Internet-Draft Flow Selection Techniques November 2011 8.2. Registration of Object Identifier IANA will register the following OID in the IPFIX-SELECTOR-MIB Functions sub-registry at http://www.iana.org/assignments/smi-numbers according to the procedures set forth in [I-D.dkcm-ipfix-rfc5815bis] +---------+-----------------------+---------------------+-----------+ | Decimal | Name | Description | Reference | +---------+-----------------------+---------------------+-----------+ | 1 | FlowSelectorAlgorithm | This Object | [RFCyyyy] | | | | Identifier | | | | | identifies the flow | | | | | selection | | | | | method(e.g., | | | | | Filtering, | | | | | Sampling) that is | | | | | applied by the Flow | | | | | Selection Process | | +---------+-----------------------+---------------------+-----------+ Editor's Note (to be removed prior to publication): the RFC editor is asked to replace "yyyy" in this document by the number of the RFC when the assignment has been made. 9. Security Considerations The described flow sampling techniques and the hash-based flow filtering technique aim at the selection of a representative subset in order to make an accurate estimation of the population. An adversary may have incentives to influence the selection of his flows, for example to circumvent accounting. Security considerations concerning the choice of a Hash Function for Hash-based Packet Selection have been discussed in Section 6.2.3 of [RFC5475] and are also appropiate for Hash-Based Flow Selection. This section discussed a number of potential attacks to craft Streams that are disproportionately detected and/or discover the Hash Function parameters, the vulnerabilities of different Hash Functions to these attacks, and practices to minimize these vulnerabilities. For other sampling approaches a user can gain knowledge about the start and stop triggers in time-based systematic Sampling, e.g., by sending test packets. This knowledge might allow users to modify their send schedule in a way that their packets are disproportionately selected or not selected. For random Sampling, a cryptographically strong random number generator should be used in order to prevent that an advisory can predict the selection decision D'Antonio, et al. Expires May 17, 2012 [Page 32] Internet-Draft Flow Selection Techniques November 2011 [GoRe07]. Further security threats can occur when Sampling parameters are configured or communicated to other entities. The protocol(s) for the configuration and reporting of Sampling parameters are out of scope of this document. Therefore, the security threats that originate from this kind of communication cannot be assessed with the information given in this document. Some of these threats can probably be addressed by keeping configuration information confidential and by authenticating entities that configure Sampling. Nevertheless, a full analysis and assessment of threats for configuration and reporting has to be done if configuration or reporting methods are proposed. 10. Acknowledgments We would like to thank the IPFIX group, especially Brian Trammell, Paul Aitken and Benoit Claise for fruitful discussions and for proofreading the document. 11. References 11.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. 11.2. Informative References [CoHa08] Cormode, G. and M. Hadjieleftheriou, "Finding frequent items in data streams", Journal, Proceedings of the Very Large DataBase Endowment VLDB Endowment, Volume 1 Issue 2, August 2008, August 2008. [DuLT01] Duffield, N., Lund, C., and M. Thorup, "Charging from Sampled Network Usage", ACM Internet Measurement Workshop IMW 2001, San Francisco, USA, November 2001. [EsVa01] Estan, C. and G,. Varghese, "New Directions in Traffic Measurement and Accounting: Focusing on the Elephants, Ignoring the Mice", ACM SIGCOMM Internet Measurement Workshop 2001, San Francisco (CA), November 2001. [KaPS03] Karp, R., Papadimitriou, C., and S. S. Shenker, "A simple algorithm for finding frequent elements in sets and bags.", ACM Transactions on Database Systems, Volume 28, D'Antonio, et al. Expires May 17, 2012 [Page 33] Internet-Draft Flow Selection Techniques November 2011 51-55, 2003, March 2003. [MSZC10] Mai, J., Sridharan, A., Zang, H., and C. Chuah, "Fast Filtered Sampling", Computer Networks Volume 54, Issue 11, Pages 1885-1898, ISSN 1389-1286, January 2010. [MaMo02] Manku, G. and R. Motwani, "Approximate Frequency Counts over Data Streams", Proceedings of the International Conference on Very large DataBases (VLDB) pages 346--357, 2002, Hong Kong, China, 2002. [RFC3917] Quittek, J., Zseby, T., Claise, B., and S. Zander, "Requirements for IP Flow Information Export (IPFIX)", RFC 3917, October 2004. [RFC5101] Claise, B., "Specification of the IP Flow Information Export (IPFIX) Protocol for the Exchange of IP Traffic Flow Information", RFC 5101, January 2008. [RFC5102] Quittek, J., Bryant, S., Claise, B., Aitken, P., and J. Meyer, "Information Model for IP Flow Information Export", RFC 5102, January 2008. [RFC5470] Sadasivan, G., Brownlee, N., Claise, B., and J. Quittek, "Architecture for IP Flow Information Export", RFC 5470, March 2009. [RFC5475] Zseby, T., Molina, M., Duffield, N., Niccolini, S., and F. Raspall, "Sampling and Filtering Techniques for IP Packet Selection", RFC 5475, March 2009. [RFC5476] Claise, B., Johnson, A., and J. Quittek, "Packet Sampling (PSAMP) Protocol Specifications", RFC 5476, March 2009. [RFC6183] Kobayashi, A., Claise, B., Muenz, G., and K. Ishibashi, "IP Flow Information Export (IPFIX) Mediation: Framework", RFC 6183, April 2011. [iana-ipfix-assignments] "IP Flow Information Export Information Elements", 2007, . D'Antonio, et al. Expires May 17, 2012 [Page 34] Internet-Draft Flow Selection Techniques November 2011 Authors' Addresses Salvatore D'Antonio University of Napoli "Parthenope" Centro Direzionale di Napoli Is. C4 Naples 80143 Italy Phone: +39 081 5476766 Email: salvatore.dantonio@uniparthenope.it Tanja Zseby Fraunhofer Institute FOKUS Kaiserin-Augusta-Allee 31 Berlin 10589 Germany Phone: +49 30 3463 7153 Email: tanja.zseby@fokus.fraunhofer.de Christian Henke Technische Universitat Berlin Strasse des 17. Juni 135 Berlin 10623 Germany Phone: +49 30 3463 7366 Email: c.henke@tu-berlin.de Lorenzo Peluso University of Napoli Via Claudio 21 Napoli 80125 Italy Phone: +39 081 7683821 Email: lorenzo.peluso@unina.it D'Antonio, et al. Expires May 17, 2012 [Page 35]