< draft-ietf-netmod-routing-cfg-14.txt   draft-ietf-netmod-routing-cfg-15.txt >
NETMOD L. Lhotka NETMOD L. Lhotka
Internet-Draft CZ.NIC Internet-Draft CZ.NIC
Intended status: Standards Track May 22, 2014 Intended status: Standards Track May 25, 2014
Expires: November 23, 2014 Expires: November 26, 2014
A YANG Data Model for Routing Management A YANG Data Model for Routing Management
draft-ietf-netmod-routing-cfg-14 draft-ietf-netmod-routing-cfg-15
Abstract Abstract
This document contains a specification of three YANG modules. This document contains a specification of three YANG modules.
Together they form the core routing data model which serves as a Together they form the core routing data model which serves as a
framework for configuring and managing a routing subsystem. It is framework for configuring and managing a routing subsystem. It is
expected that these modules will be augmented by additional YANG expected that these modules will be augmented by additional YANG
modules defining data models for individual routing protocols and modules defining data models for individual routing protocols and
other related functions. The core routing data model provides common other related functions. The core routing data model provides common
building blocks for such extensions - routing instances, routes, building blocks for such extensions - routing instances, routes,
skipping to change at page 1, line 37 skipping to change at page 1, line 37
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet- working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/. Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
This Internet-Draft will expire on November 23, 2014. This Internet-Draft will expire on November 26, 2014.
Copyright Notice Copyright Notice
Copyright (c) 2014 IETF Trust and the persons identified as the Copyright (c) 2014 IETF Trust and the persons identified as the
document authors. All rights reserved. document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of (http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents publication of this document. Please review these documents
skipping to change at page 2, line 49 skipping to change at page 2, line 49
13. References . . . . . . . . . . . . . . . . . . . . . . . . . . 73 13. References . . . . . . . . . . . . . . . . . . . . . . . . . . 73
13.1. Normative References . . . . . . . . . . . . . . . . . . . 73 13.1. Normative References . . . . . . . . . . . . . . . . . . . 73
13.2. Informative References . . . . . . . . . . . . . . . . . . 73 13.2. Informative References . . . . . . . . . . . . . . . . . . 73
Appendix A. The Complete Data Trees . . . . . . . . . . . . . . . 74 Appendix A. The Complete Data Trees . . . . . . . . . . . . . . . 74
A.1. Configuration Data . . . . . . . . . . . . . . . . . . . . 74 A.1. Configuration Data . . . . . . . . . . . . . . . . . . . . 74
A.2. Operational State Data . . . . . . . . . . . . . . . . . . 76 A.2. Operational State Data . . . . . . . . . . . . . . . . . . 76
Appendix B. Minimum Implementation . . . . . . . . . . . . . . . 78 Appendix B. Minimum Implementation . . . . . . . . . . . . . . . 78
Appendix C. Example: Adding a New Routing Protocol . . . . . . . 79 Appendix C. Example: Adding a New Routing Protocol . . . . . . . 79
Appendix D. Example: NETCONF <get> Reply . . . . . . . . . . . . 82 Appendix D. Example: NETCONF <get> Reply . . . . . . . . . . . . 82
Appendix E. Change Log . . . . . . . . . . . . . . . . . . . . . 89 Appendix E. Change Log . . . . . . . . . . . . . . . . . . . . . 89
E.1. Changes Between Versions -13 and -14 . . . . . . . . . . . 89 E.1. Changes Between Versions -14 and -15 . . . . . . . . . . . 89
E.2. Changes Between Versions -12 and -13 . . . . . . . . . . . 89 E.2. Changes Between Versions -13 and -14 . . . . . . . . . . . 89
E.3. Changes Between Versions -11 and -12 . . . . . . . . . . . 90 E.3. Changes Between Versions -12 and -13 . . . . . . . . . . . 89
E.4. Changes Between Versions -10 and -11 . . . . . . . . . . . 90 E.4. Changes Between Versions -11 and -12 . . . . . . . . . . . 90
E.5. Changes Between Versions -09 and -10 . . . . . . . . . . . 90 E.5. Changes Between Versions -10 and -11 . . . . . . . . . . . 90
E.6. Changes Between Versions -08 and -09 . . . . . . . . . . . 91 E.6. Changes Between Versions -09 and -10 . . . . . . . . . . . 90
E.7. Changes Between Versions -07 and -08 . . . . . . . . . . . 91 E.7. Changes Between Versions -08 and -09 . . . . . . . . . . . 91
E.8. Changes Between Versions -06 and -07 . . . . . . . . . . . 91 E.8. Changes Between Versions -07 and -08 . . . . . . . . . . . 91
E.9. Changes Between Versions -05 and -06 . . . . . . . . . . . 91 E.9. Changes Between Versions -06 and -07 . . . . . . . . . . . 91
E.10. Changes Between Versions -04 and -05 . . . . . . . . . . . 92 E.10. Changes Between Versions -05 and -06 . . . . . . . . . . . 91
E.11. Changes Between Versions -03 and -04 . . . . . . . . . . . 93 E.11. Changes Between Versions -04 and -05 . . . . . . . . . . . 92
E.12. Changes Between Versions -02 and -03 . . . . . . . . . . . 93 E.12. Changes Between Versions -03 and -04 . . . . . . . . . . . 93
E.13. Changes Between Versions -01 and -02 . . . . . . . . . . . 94 E.13. Changes Between Versions -02 and -03 . . . . . . . . . . . 93
E.14. Changes Between Versions -00 and -01 . . . . . . . . . . . 94 E.14. Changes Between Versions -01 and -02 . . . . . . . . . . . 94
E.15. Changes Between Versions -00 and -01 . . . . . . . . . . . 94
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 95 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 95
1. Introduction 1. Introduction
This document contains a specification of the following YANG modules: This document contains a specification of the following YANG modules:
o Module "ietf-routing" provides generic components of a routing o Module "ietf-routing" provides generic components of a routing
data model. data model.
o Module "ietf-ipv4-unicast-routing" augments the "ietf-routing" o Module "ietf-ipv4-unicast-routing" augments the "ietf-routing"
skipping to change at page 21, line 13 skipping to change at page 21, line 13
it into the core routing framework in the following way: it into the core routing framework in the following way:
o A new identity MUST be defined for the routing protocol and its o A new identity MUST be defined for the routing protocol and its
base identity MUST be set to "rt:routing-protocol", or to an base identity MUST be set to "rt:routing-protocol", or to an
identity derived from "rt:routing-protocol". identity derived from "rt:routing-protocol".
o Additional route attributes MAY be defined, preferably in one o Additional route attributes MAY be defined, preferably in one
place by means of defining a YANG grouping. The new attributes place by means of defining a YANG grouping. The new attributes
have to be inserted by augmenting the definitions of the nodes have to be inserted by augmenting the definitions of the nodes
/rt:routing-state/rt:ribs/rt:rib/rt:route /rt:routing-state/rt:ribs/rt:rib/rt:routes/rt:route
and and
/rt:active-route/rt:output/rt:route, /rt:active-route/rt:output/rt:route,
and possibly other places in the configuration, state data and RPC and possibly other places in the configuration, state data and RPC
input or output. input or output.
o Configuration parameters and/or state data for the new protocol o Configuration parameters and/or state data for the new protocol
can be defined by augmenting the "routing-protocol" data node can be defined by augmenting the "routing-protocol" data node
skipping to change at page 25, line 11 skipping to change at page 25, line 11
direct route. The destination prefix of this route is set according direct route. The destination prefix of this route is set according
to the configured IP address and network prefix/mask, and the to the configured IP address and network prefix/mask, and the
interface is set as the outgoing interface for that route. interface is set as the outgoing interface for that route.
7. Routing Management YANG Module 7. Routing Management YANG Module
RFC Ed.: In this section, replace all occurrences of 'XXXX' with the RFC Ed.: In this section, replace all occurrences of 'XXXX' with the
actual RFC number and all occurrences of the revision date below with actual RFC number and all occurrences of the revision date below with
the date of RFC publication (and remove this note). the date of RFC publication (and remove this note).
<CODE BEGINS> file "ietf-routing@2014-05-22.yang" <CODE BEGINS> file "ietf-routing@2014-05-24.yang"
module ietf-routing { module ietf-routing {
namespace "urn:ietf:params:xml:ns:yang:ietf-routing"; namespace "urn:ietf:params:xml:ns:yang:ietf-routing";
prefix "rt"; prefix "rt";
import ietf-yang-types { import ietf-yang-types {
prefix "yang"; prefix "yang";
} }
skipping to change at page 26, line 11 skipping to change at page 26, line 11
Redistribution and use in source and binary forms, with or Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents Relating to IETF Documents
(http://trustee.ietf.org/license-info). (http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see the This version of this YANG module is part of RFC XXXX; see the
RFC itself for full legal notices."; RFC itself for full legal notices.";
revision 2014-05-22 { revision 2014-05-24 {
description description
"Initial revision."; "Initial revision.";
reference reference
"RFC XXXX: A YANG Data Model for Routing Management"; "RFC XXXX: A YANG Data Model for Routing Management";
} }
/* Features */ /* Features */
feature multiple-ribs { feature multiple-ribs {
description description
skipping to change at page 31, line 34 skipping to change at page 31, line 34
value "1"; value "1";
description description
"Primary next-hop."; "Primary next-hop.";
} }
enum backup { enum backup {
value "2"; value "2";
description description
"Backup next-hop."; "Backup next-hop.";
} }
} }
default "primary";
description description
"Simple priority for distinguishing between primary and "Simple priority for distinguishing between primary and
backup next-hops. backup next-hops.
Backup next-hops are used if and only if no primary Backup next-hops are used if and only if no primary
next-hops are reachable."; next-hops are reachable.";
} }
leaf weight { leaf weight {
type uint8; type uint8;
must ". = 0 or not(../../next-hop/weight = 0)" { must ". = 0 or not(../../next-hop/weight = 0)" {
error-message "Illegal combination of zero and non-zero " error-message "Illegal combination of zero and non-zero "
+ "next-hop weights."; + "next-hop weights.";
description description
"Next-hop weights must be either all zero (equal "Next-hop weights must be either all zero (equal
load-balancing) or all non-zero."; load-balancing) or all non-zero.";
} }
default "0";
description description
"This parameter specifies the weight of the next-hop for load "This parameter specifies the weight of the next-hop for load
balancing. The number specifies the relative fraction of the balancing. The number specifies the relative fraction of the
traffic that will use the corresponding next-hop. traffic that will use the corresponding next-hop.
The default value of 0 represents equal load-balancing. A value of 0 represents equal load-balancing.
If both primary and backup next-hops are present, then the If both primary and backup next-hops are present, then the
weights for each priority level are used separately."; weights for each priority level are used separately.";
} }
} }
grouping next-hop-content { grouping next-hop-content {
description description
"Generic parameters of next-hops in routes."; "Generic parameters of next-hops in routes.";
choice next-hop-options { choice next-hop-options {
skipping to change at page 34, line 4 skipping to change at page 33, line 50
i.e., it SHOULD NOT change across reboots."; i.e., it SHOULD NOT change across reboots.";
} }
uses state-entry-id { uses state-entry-id {
refine "id" { refine "id" {
mandatory "true"; mandatory "true";
} }
} }
leaf type { leaf type {
type identityref { type identityref {
base routing-instance-type; base routing-instance-type;
} }
default "rt:standard-routing-instance";
description description
"The routing instance type, primarily intended for "The routing instance type, primarily intended for
discriminating among different types of logical routers, discriminating among different types of logical routers,
route virtualization, master-slave arrangements etc., route virtualization, master-slave arrangements etc.,
while keeping all routing instances in the same flat while keeping all routing instances in the same flat
list."; list.";
} }
uses router-id { uses router-id {
description description
"Global router ID. "Global router ID.
skipping to change at page 47, line 11 skipping to change at page 47, line 11
} }
<CODE ENDS> <CODE ENDS>
8. IPv4 Unicast Routing Management YANG Module 8. IPv4 Unicast Routing Management YANG Module
RFC Ed.: In this section, replace all occurrences of 'XXXX' with the RFC Ed.: In this section, replace all occurrences of 'XXXX' with the
actual RFC number and all occurrences of the revision date below with actual RFC number and all occurrences of the revision date below with
the date of RFC publication (and remove this note). the date of RFC publication (and remove this note).
<CODE BEGINS> file "ietf-ipv4-unicast-routing@2014-05-22.yang" <CODE BEGINS> file "ietf-ipv4-unicast-routing@2014-05-24.yang"
module ietf-ipv4-unicast-routing { module ietf-ipv4-unicast-routing {
namespace "urn:ietf:params:xml:ns:yang:ietf-ipv4-unicast-routing"; namespace "urn:ietf:params:xml:ns:yang:ietf-ipv4-unicast-routing";
prefix "v4ur"; prefix "v4ur";
import ietf-routing { import ietf-routing {
prefix "rt"; prefix "rt";
} }
skipping to change at page 48, line 12 skipping to change at page 48, line 12
Redistribution and use in source and binary forms, with or Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents Relating to IETF Documents
(http://trustee.ietf.org/license-info). (http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see the This version of this YANG module is part of RFC XXXX; see the
RFC itself for full legal notices."; RFC itself for full legal notices.";
revision 2014-05-22 { revision 2014-05-24 {
description description
"Initial revision."; "Initial revision.";
reference reference
"RFC XXXX: A YANG Data Model for Routing Management"; "RFC XXXX: A YANG Data Model for Routing Management";
} }
/* Identities */ /* Identities */
identity ipv4-unicast { identity ipv4-unicast {
base rt:ipv4; base rt:ipv4;
skipping to change at page 51, line 29 skipping to change at page 51, line 29
type leafref { type leafref {
path "../../../../../../../../rt:interfaces/" path "../../../../../../../../rt:interfaces/"
+ "rt:interface/rt:name"; + "rt:interface/rt:name";
} }
description description
"Name of the outgoing interface. "Name of the outgoing interface.
Only interfaces configured for the ancestor Only interfaces configured for the ancestor
routing instance can be given."; routing instance can be given.";
} }
uses rt:next-hop-classifiers; uses rt:next-hop-classifiers {
refine "priority" {
default "primary";
}
refine "weight" {
default "0";
}
}
} }
} }
} }
} }
} }
} }
} }
/* RPC methods */ /* RPC methods */
skipping to change at page 53, line 4 skipping to change at page 53, line 11
} }
if-feature rt:multipath-routes; if-feature rt:multipath-routes;
description description
"This leaf augments the 'next-hop-list' case in the reply to "This leaf augments the 'next-hop-list' case in the reply to
the 'rt:active-route' operation."; the 'rt:active-route' operation.";
leaf address { leaf address {
type inet:ipv4-address; type inet:ipv4-address;
description description
"IPv4 address of the next-hop."; "IPv4 address of the next-hop.";
} }
} }
} }
<CODE ENDS> <CODE ENDS>
9. IPv6 Unicast Routing Management YANG Module 9. IPv6 Unicast Routing Management YANG Module
RFC Ed.: In this section, replace all occurrences of 'XXXX' with the RFC Ed.: In this section, replace all occurrences of 'XXXX' with the
actual RFC number and all occurrences of the revision date below with actual RFC number and all occurrences of the revision date below with
the date of RFC publication (and remove this note). the date of RFC publication (and remove this note).
<CODE BEGINS> file "ietf-ipv6-unicast-routing@2014-05-22.yang" <CODE BEGINS> file "ietf-ipv6-unicast-routing@2014-05-25.yang"
module ietf-ipv6-unicast-routing { module ietf-ipv6-unicast-routing {
namespace "urn:ietf:params:xml:ns:yang:ietf-ipv6-unicast-routing"; namespace "urn:ietf:params:xml:ns:yang:ietf-ipv6-unicast-routing";
prefix "v6ur"; prefix "v6ur";
import ietf-routing { import ietf-routing {
prefix "rt"; prefix "rt";
} }
skipping to change at page 55, line 20 skipping to change at page 55, line 20
Redistribution and use in source and binary forms, with or Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents Relating to IETF Documents
(http://trustee.ietf.org/license-info). (http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see the This version of this YANG module is part of RFC XXXX; see the
RFC itself for full legal notices."; RFC itself for full legal notices.";
revision 2014-05-22 { revision 2014-05-25 {
description description
"Initial revision."; "Initial revision.";
reference reference
"RFC XXXX: A YANG Data Model for Routing Management"; "RFC XXXX: A YANG Data Model for Routing Management";
} }
/* Identities */ /* Identities */
identity ipv6-unicast { identity ipv6-unicast {
base rt:ipv6; base rt:ipv6;
skipping to change at page 55, line 46 skipping to change at page 55, line 46
augment "/rt:routing-state/rt:routing-instance/rt:interfaces/" augment "/rt:routing-state/rt:routing-instance/rt:interfaces/"
+ "rt:interface" { + "rt:interface" {
description description
"IPv6-specific parameters of router interfaces."; "IPv6-specific parameters of router interfaces.";
container ipv6-router-advertisements { container ipv6-router-advertisements {
description description
"Parameters of IPv6 Router Advertisements."; "Parameters of IPv6 Router Advertisements.";
leaf send-advertisements { leaf send-advertisements {
type boolean; type boolean;
default "false";
description description
"A flag indicating whether or not the router sends periodic "A flag indicating whether or not the router sends periodic
Router Advertisements and responds to Router Router Advertisements and responds to Router
Solicitations."; Solicitations.";
} }
leaf max-rtr-adv-interval { leaf max-rtr-adv-interval {
type uint16 { type uint16 {
range "4..1800"; range "4..1800";
} }
units "seconds"; units "seconds";
default "600";
description description
"The maximum time allowed between sending unsolicited "The maximum time allowed between sending unsolicited
multicast Router Advertisements from the interface."; multicast Router Advertisements from the interface.";
} }
leaf min-rtr-adv-interval { leaf min-rtr-adv-interval {
type uint16 { type uint16 {
range "3..1350"; range "3..1350";
} }
units "seconds"; units "seconds";
description description
"The minimum time allowed between sending unsolicited "The minimum time allowed between sending unsolicited
multicast Router Advertisements from the interface."; multicast Router Advertisements from the interface.";
} }
leaf managed-flag { leaf managed-flag {
type boolean; type boolean;
default "false";
description description
"The boolean value that is placed in the 'Managed address "The value that is placed in the 'Managed address
configuration' flag field in the Router Advertisement."; configuration' flag field in the Router Advertisement.";
} }
leaf other-config-flag { leaf other-config-flag {
type boolean; type boolean;
default "false";
description description
"The boolean value that is placed in the 'Other "The value that is placed in the 'Other configuration' flag
configuration' flag field in the Router Advertisement."; field in the Router Advertisement.";
} }
leaf link-mtu { leaf link-mtu {
type uint32; type uint32;
default "0";
description description
"The value that is placed in MTU options sent by the "The value that is placed in MTU options sent by the
router. A value of zero indicates that no MTU options are router. A value of zero indicates that no MTU options are
sent."; sent.";
} }
leaf reachable-time { leaf reachable-time {
type uint32 { type uint32 {
range "0..3600000"; range "0..3600000";
} }
units "milliseconds"; units "milliseconds";
default "0";
description description
"The value that is placed in the Reachable Time field in "The value that is placed in the Reachable Time field in
the Router Advertisement messages sent by the router. The the Router Advertisement messages sent by the router. A
value zero means unspecified (by this router)."; value of zero means unspecified (by this router).";
} }
leaf retrans-timer { leaf retrans-timer {
type uint32; type uint32;
units "milliseconds"; units "milliseconds";
default "0";
description description
"The value that is placed in the Retrans Timer field in the "The value that is placed in the Retrans Timer field in the
Router Advertisement messages sent by the router. The Router Advertisement messages sent by the router. A value
value zero means unspecified (by this router)."; of zero means unspecified (by this router).";
} }
leaf cur-hop-limit { leaf cur-hop-limit {
type uint8; type uint8;
description description
"The default value that is placed in the Cur Hop Limit "The value that is placed in the Cur Hop Limit field in the
field in the Router Advertisement messages sent by the Router Advertisement messages sent by the router. A value
router. The value zero means unspecified (by this of zero means unspecified (by this router).";
router).";
} }
leaf default-lifetime { leaf default-lifetime {
type uint16 { type uint16 {
range "0..9000"; range "0..9000";
} }
units "seconds"; units "seconds";
description description
"The value that is placed in the Router Lifetime field of "The value that is placed in the Router Lifetime field of
Router Advertisements sent from the interface, in seconds. Router Advertisements sent from the interface, in seconds.
A value of zero indicates that the router is not to be A value of zero indicates that the router is not to be
skipping to change at page 58, line 9 skipping to change at page 57, line 49
description description
"Advertised prefix entry and its parameters."; "Advertised prefix entry and its parameters.";
leaf prefix-spec { leaf prefix-spec {
type inet:ipv6-prefix; type inet:ipv6-prefix;
description description
"IPv6 address prefix."; "IPv6 address prefix.";
} }
leaf valid-lifetime { leaf valid-lifetime {
type uint32; type uint32;
units "seconds"; units "seconds";
default "2592000";
description description
"The value that is placed in the Valid Lifetime in the "The value that is placed in the Valid Lifetime in the
Prefix Information option. The designated value of all Prefix Information option. The designated value of all
1's (0xffffffff) represents infinity."; 1's (0xffffffff) represents infinity.";
} }
leaf on-link-flag { leaf on-link-flag {
type boolean; type boolean;
default "true";
description description
"The value that is placed in the on-link flag ('L-bit') "The value that is placed in the on-link flag ('L-bit')
field in the Prefix Information option."; field in the Prefix Information option.";
} }
leaf preferred-lifetime { leaf preferred-lifetime {
type uint32; type uint32;
units "seconds"; units "seconds";
default "604800";
description description
"The value that is placed in the Preferred Lifetime in "The value that is placed in the Preferred Lifetime in
the Prefix Information option, in seconds. The the Prefix Information option, in seconds. The
designated value of all 1's (0xffffffff) represents designated value of all 1's (0xffffffff) represents
infinity."; infinity.";
} }
leaf autonomous-flag { leaf autonomous-flag {
type boolean; type boolean;
default "true";
description description
"The value that is placed in the Autonomous Flag field "The value that is placed in the Autonomous Flag field
in the Prefix Information option."; in the Prefix Information option.";
} }
} }
} }
} }
} }
augment "/rt:routing-state/rt:ribs/rt:rib/rt:routes/rt:route" { augment "/rt:routing-state/rt:ribs/rt:rib/rt:routes/rt:route" {
skipping to change at page 61, line 17 skipping to change at page 61, line 5
- otherwise it is 0.75 * max-rtr-adv-interval."; - otherwise it is 0.75 * max-rtr-adv-interval.";
reference reference
"RFC 4861: Neighbor Discovery for IP version 6 (IPv6) - "RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -
MinRtrAdvInterval."; MinRtrAdvInterval.";
} }
leaf managed-flag { leaf managed-flag {
type boolean; type boolean;
default "false"; default "false";
description description
"The boolean value to be placed in the 'Managed address "The value to be placed in the 'Managed address
configuration' flag field in the Router Advertisement."; configuration' flag field in the Router Advertisement.";
reference reference
"RFC 4861: Neighbor Discovery for IP version 6 (IPv6) - "RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -
AdvManagedFlag."; AdvManagedFlag.";
} }
leaf other-config-flag { leaf other-config-flag {
type boolean; type boolean;
default "false"; default "false";
description description
"The boolean value to be placed in the 'Other "The value to be placed in the 'Other configuration' flag
configuration' flag field in the Router Advertisement."; field in the Router Advertisement.";
reference reference
"RFC 4861: Neighbor Discovery for IP version 6 (IPv6) - "RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -
AdvOtherConfigFlag."; AdvOtherConfigFlag.";
} }
leaf link-mtu { leaf link-mtu {
type uint32; type uint32;
default "0"; default "0";
description description
"The value to be placed in MTU options sent by the router. "The value to be placed in MTU options sent by the router.
A value of zero indicates that no MTU options are sent."; A value of zero indicates that no MTU options are sent.";
skipping to change at page 61, line 51 skipping to change at page 61, line 39
AdvLinkMTU."; AdvLinkMTU.";
} }
leaf reachable-time { leaf reachable-time {
type uint32 { type uint32 {
range "0..3600000"; range "0..3600000";
} }
units "milliseconds"; units "milliseconds";
default "0"; default "0";
description description
"The value to be placed in the Reachable Time field in the "The value to be placed in the Reachable Time field in the
Router Advertisement messages sent by the router. The Router Advertisement messages sent by the router. A value
value zero means unspecified (by this router)."; of zero means unspecified (by this router).";
reference reference
"RFC 4861: Neighbor Discovery for IP version 6 (IPv6) - "RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -
AdvReachableTime."; AdvReachableTime.";
} }
leaf retrans-timer { leaf retrans-timer {
type uint32; type uint32;
units "milliseconds"; units "milliseconds";
default "0"; default "0";
description description
"The value to be placed in the Retrans Timer field in the "The value to be placed in the Retrans Timer field in the
Router Advertisement messages sent by the router. The Router Advertisement messages sent by the router. A value
value zero means unspecified (by this router)."; of zero means unspecified (by this router).";
reference reference
"RFC 4861: Neighbor Discovery for IP version 6 (IPv6) - "RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -
AdvRetransTimer."; AdvRetransTimer.";
} }
leaf cur-hop-limit { leaf cur-hop-limit {
type uint8; type uint8;
default "64";
description description
"The default value to be placed in the Cur Hop Limit field "The value to be placed in the Cur Hop Limit field in the
in the Router Advertisement messages sent by the router. Router Advertisement messages sent by the router. A value
The value zero means unspecified (by this router). of zero means unspecified (by this router).
If this parameter is not configured, the device SHOULD use If this parameter is not configured, the device SHOULD use
the value specified in IANA Assigned Numbers that was in the value specified in IANA Assigned Numbers that was in
effect at the time of implementation."; effect at the time of implementation.";
reference reference
"- RFC 4861: Neighbor Discovery for IP version 6 (IPv6) - "RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -
AdvCurHopLimit. AdvCurHopLimit.
- IANA: IP Parameters, IANA: IP Parameters,
http://www.iana.org/assignments/ip-parameters"; http://www.iana.org/assignments/ip-parameters";
} }
leaf default-lifetime { leaf default-lifetime {
type uint16 { type uint16 {
range "0..9000"; range "0..9000";
} }
units "seconds"; units "seconds";
description description
"The value to be placed in the Router Lifetime field of "The value to be placed in the Router Lifetime field of
Router Advertisements sent from the interface, in seconds. Router Advertisements sent from the interface, in seconds.
MUST be either zero or between max-rtr-adv-interval and It MUST be either zero or between max-rtr-adv-interval and
9000 seconds. A value of zero indicates that the router is 9000 seconds. A value of zero indicates that the router is
not to be used as a default router. These limits may be not to be used as a default router. These limits may be
overridden by specific documents that describe how IPv6 overridden by specific documents that describe how IPv6
operates over different link layers. operates over different link layers.
If this parameter is not configured, the device SHOULD use If this parameter is not configured, the device SHOULD use
a value of 3 * max-rtr-adv-interval."; a value of 3 * max-rtr-adv-interval.";
reference reference
"RFC 4861: Neighbor Discovery for IP version 6 (IPv6) - "RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -
AdvDefaultLifeTime."; AdvDefaultLifeTime.";
skipping to change at page 67, line 9 skipping to change at page 66, line 46
type leafref { type leafref {
path "../../../../../../../../rt:interfaces/" path "../../../../../../../../rt:interfaces/"
+ "rt:interface/rt:name"; + "rt:interface/rt:name";
} }
description description
"Name of the outgoing interface. "Name of the outgoing interface.
Only interfaces configured for the ancestor Only interfaces configured for the ancestor
routing instance can be given."; routing instance can be given.";
} }
uses rt:next-hop-classifiers; uses rt:next-hop-classifiers {
refine "priority" {
default "primary";
}
refine "weight" {
default "0";
}
}
} }
} }
} }
} }
} }
} }
} }
/* RPC methods */ /* RPC methods */
skipping to change at page 89, line 9 skipping to change at page 89, line 9
</rt:rib> </rt:rib>
</rt:ribs> </rt:ribs>
</rt:routing-state> </rt:routing-state>
</data> </data>
</rpc-reply> </rpc-reply>
Appendix E. Change Log Appendix E. Change Log
RFC Editor: remove this section upon publication as an RFC. RFC Editor: remove this section upon publication as an RFC.
E.1. Changes Between Versions -13 and -14 E.1. Changes Between Versions -14 and -15
o Removed all defaults from state data.
o Removed default from 'cur-hop-limit' in config.
E.2. Changes Between Versions -13 and -14
o Removed dependency of 'connected-ribs' on the 'multiple-ribs' o Removed dependency of 'connected-ribs' on the 'multiple-ribs'
feature. feature.
o Removed default value of 'cur-hop-limit' in state data. o Removed default value of 'cur-hop-limit' in state data.
o Moved parts of descriptions and all references on IPv6 RA o Moved parts of descriptions and all references on IPv6 RA
parameters from state data to configuration. parameters from state data to configuration.
o Added reference to RFC 6536 in the Security section. o Added reference to RFC 6536 in the Security section.
E.2. Changes Between Versions -12 and -13 E.3. Changes Between Versions -12 and -13
o Wrote appendix about minimum implementation. o Wrote appendix about minimum implementation.
o Remove "when" statement for IPv6 router interface operational o Remove "when" statement for IPv6 router interface operational
state - it was dependent on a config value that may not be state - it was dependent on a config value that may not be
present. present.
o Extra container for the next-hop list. o Extra container for the next-hop list.
o Names rather than numeric ids are used for referring to list o Names rather than numeric ids are used for referring to list
skipping to change at page 90, line 5 skipping to change at page 90, line 8
o o
o Removed "if-feature multiple-ribs;" from connected-ribs. o Removed "if-feature multiple-ribs;" from connected-ribs.
o "rib-name" instead of "name" is used as the name of leafref nodes. o "rib-name" instead of "name" is used as the name of leafref nodes.
o "next-hop" instead of "nexthop" or "gateway" used throughout, both o "next-hop" instead of "nexthop" or "gateway" used throughout, both
in node names and text. in node names and text.
E.3. Changes Between Versions -11 and -12 E.4. Changes Between Versions -11 and -12
o Removed feature "advanced-router" and introduced two features o Removed feature "advanced-router" and introduced two features
instead: "multiple-ribs" and "multipath-routes". instead: "multiple-ribs" and "multipath-routes".
o Unified the keys of config and state versions of "routing- o Unified the keys of config and state versions of "routing-
instance" and "rib" lists. instance" and "rib" lists.
o Numerical identifiers of state list entries are not keys anymore, o Numerical identifiers of state list entries are not keys anymore,
but they are constrained using the "unique" statement. but they are constrained using the "unique" statement.
o Updated acknowledgements. o Updated acknowledgements.
E.4. Changes Between Versions -10 and -11 E.5. Changes Between Versions -10 and -11
o Migrated address families from IANA enumerations to identities. o Migrated address families from IANA enumerations to identities.
o Terminology and node names aligned with the I2RS RIB model: router o Terminology and node names aligned with the I2RS RIB model: router
-> routing instance, routing table -> RIB. -> routing instance, routing table -> RIB.
o Introduced uint64 keys for state lists: routing-instance, rib, o Introduced uint64 keys for state lists: routing-instance, rib,
route, nexthop. route, nexthop.
o Described the relationship between system-controlled and user- o Described the relationship between system-controlled and user-
skipping to change at page 90, line 42 skipping to change at page 90, line 45
router". router".
o Made nexthop into a choice in order to allow for nexthop-list o Made nexthop into a choice in order to allow for nexthop-list
(I2RS requirement). (I2RS requirement).
o Added nexthop-list with entries having priorities (backup) and o Added nexthop-list with entries having priorities (backup) and
weights (load balancing). weights (load balancing).
o Updated bibliography references. o Updated bibliography references.
E.5. Changes Between Versions -09 and -10 E.6. Changes Between Versions -09 and -10
o Added subtree for operational state data ("/routing-state"). o Added subtree for operational state data ("/routing-state").
o Terms "system-controlled entry" and "user-controlled entry" o Terms "system-controlled entry" and "user-controlled entry"
defined and used. defined and used.
o New feature "user-defined-routing-tables". Nodes that are useful o New feature "user-defined-routing-tables". Nodes that are useful
only with user-defined routing tables are now conditional. only with user-defined routing tables are now conditional.
o Added grouping "router-id". o Added grouping "router-id".
o In routing tables, "source-protocol" attribute of routes now o In routing tables, "source-protocol" attribute of routes now
reports only protocol type, and its datatype is "identityref". reports only protocol type, and its datatype is "identityref".
o Renamed "main-routing-table" to "default-routing-table". o Renamed "main-routing-table" to "default-routing-table".
E.6. Changes Between Versions -08 and -09 E.7. Changes Between Versions -08 and -09
o Fixed "must" expresion for "connected-routing-table". o Fixed "must" expresion for "connected-routing-table".
o Simplified "must" expression for "main-routing-table". o Simplified "must" expression for "main-routing-table".
o Moved per-interface configuration of a new routing protocol under o Moved per-interface configuration of a new routing protocol under
'routing-protocol'. This also affects the 'example-rip' module. 'routing-protocol'. This also affects the 'example-rip' module.
E.7. Changes Between Versions -07 and -08 E.8. Changes Between Versions -07 and -08
o Changed reference from RFC6021 to RFC6021bis. o Changed reference from RFC6021 to RFC6021bis.
E.8. Changes Between Versions -06 and -07 E.9. Changes Between Versions -06 and -07
o The contents of <get-reply> in Appendix D was updated: "eth[01]" o The contents of <get-reply> in Appendix D was updated: "eth[01]"
is used as the value of "location", and "forwarding" is on for is used as the value of "location", and "forwarding" is on for
both interfaces and both IPv4 and IPv6. both interfaces and both IPv4 and IPv6.
o The "must" expression for "main-routing-table" was modified to o The "must" expression for "main-routing-table" was modified to
avoid redundant error messages reporting address family mismatch avoid redundant error messages reporting address family mismatch
when "name" points to a non-existent routing table. when "name" points to a non-existent routing table.
o The default behavior for IPv6 RA prefix advertisements was o The default behavior for IPv6 RA prefix advertisements was
clarified. clarified.
o Changed type of "rt:router-id" to "ip:dotted-quad". o Changed type of "rt:router-id" to "ip:dotted-quad".
o Type of "rt:router-id" changed to "yang:dotted-quad". o Type of "rt:router-id" changed to "yang:dotted-quad".
o Fixed missing prefixes in XPath expressions. o Fixed missing prefixes in XPath expressions.
E.9. Changes Between Versions -05 and -06 E.10. Changes Between Versions -05 and -06
o Document title changed: "Configuration" was replaced by o Document title changed: "Configuration" was replaced by
"Management". "Management".
o New typedefs "routing-table-ref" and "route-filter-ref". o New typedefs "routing-table-ref" and "route-filter-ref".
o Double slashes "//" were removed from XPath expressions and o Double slashes "//" were removed from XPath expressions and
replaced with the single "/". replaced with the single "/".
o Removed uniqueness requirement for "router-id". o Removed uniqueness requirement for "router-id".
skipping to change at page 92, line 17 skipping to change at page 92, line 22
o Complete data tree is now in Appendix A. o Complete data tree is now in Appendix A.
o Changed type of "source-protocol" from "leafref" to "string". o Changed type of "source-protocol" from "leafref" to "string".
o Clarified the relationship between routing protocol instances and o Clarified the relationship between routing protocol instances and
connected routing tables. connected routing tables.
o Added a must constraint saying that a routing table connected to o Added a must constraint saying that a routing table connected to
the direct pseudo-protocol must not be a main routing table. the direct pseudo-protocol must not be a main routing table.
E.10. Changes Between Versions -04 and -05 E.11. Changes Between Versions -04 and -05
o Routing tables are now global, i.e., "routing-tables" is a child o Routing tables are now global, i.e., "routing-tables" is a child
of "routing" rather than "router". of "routing" rather than "router".
o "must" statement for "static-routes" changed to "when". o "must" statement for "static-routes" changed to "when".
o Added "main-routing-tables" containing references to main routing o Added "main-routing-tables" containing references to main routing
tables for each address family. tables for each address family.
o Removed the defaults for "address-family" and "safi" and made them o Removed the defaults for "address-family" and "safi" and made them
skipping to change at page 93, line 5 skipping to change at page 93, line 8
o The "direct" pseudo-protocol is always connected to main routing o The "direct" pseudo-protocol is always connected to main routing
tables. tables.
o Entries in the list of connected routing tables renamed from o Entries in the list of connected routing tables renamed from
"routing-table" to "connected-routing-table". "routing-table" to "connected-routing-table".
o Added "must" constraint saying that a routing table must not be o Added "must" constraint saying that a routing table must not be
its own recipient. its own recipient.
E.11. Changes Between Versions -03 and -04 E.12. Changes Between Versions -03 and -04
o Changed "error-tag" for both RPC methods from "missing element" to o Changed "error-tag" for both RPC methods from "missing element" to
"data-missing". "data-missing".
o Removed the decrementing behavior for advertised IPv6 prefix o Removed the decrementing behavior for advertised IPv6 prefix
parameters "valid-lifetime" and "preferred-lifetime". parameters "valid-lifetime" and "preferred-lifetime".
o Changed the key of the static route lists from "seqno" to "id" o Changed the key of the static route lists from "seqno" to "id"
because the routes needn't be sorted. because the routes needn't be sorted.
o Added 'must' constraint saying that "preferred-lifetime" must not o Added 'must' constraint saying that "preferred-lifetime" must not
be greater than "valid-lifetime". be greater than "valid-lifetime".
E.12. Changes Between Versions -02 and -03 E.13. Changes Between Versions -02 and -03
o Module "iana-afn-safi" moved to I-D "iana-if-type". o Module "iana-afn-safi" moved to I-D "iana-if-type".
o Removed forwarding table. o Removed forwarding table.
o RPC "get-route" changed to "active-route". Its output is a list o RPC "get-route" changed to "active-route". Its output is a list
of routes (for multi-path routing). of routes (for multi-path routing).
o New RPC "route-count". o New RPC "route-count".
skipping to change at page 94, line 5 skipping to change at page 94, line 7
"ietf-ip". "ietf-ip".
o Added "router-id" leaf. o Added "router-id" leaf.
o Specified the names for IPv4/IPv6 unicast main routing tables. o Specified the names for IPv4/IPv6 unicast main routing tables.
o Route parameter "last-modified" changed to "age". o Route parameter "last-modified" changed to "age".
o Added container "recipient-routing-tables". o Added container "recipient-routing-tables".
E.13. Changes Between Versions -01 and -02 E.14. Changes Between Versions -01 and -02
o Added module "ietf-ipv6-unicast-routing". o Added module "ietf-ipv6-unicast-routing".
o The example in Appendix D now uses IP addresses from blocks o The example in Appendix D now uses IP addresses from blocks
reserved for documentation. reserved for documentation.
o Direct routes appear by default in the forwarding table. o Direct routes appear by default in the forwarding table.
o Network layer interfaces must be assigned to a router instance. o Network layer interfaces must be assigned to a router instance.
Additional interface configuration may be present. Additional interface configuration may be present.
skipping to change at page 94, line 29 skipping to change at page 94, line 31
o Additional "must" statements were added. o Additional "must" statements were added.
o The "route-content" grouping for IPv4 and IPv6 unicast now o The "route-content" grouping for IPv4 and IPv6 unicast now
includes the material from the "ietf-routing" version via "uses includes the material from the "ietf-routing" version via "uses
rt:route-content". rt:route-content".
o Explanation of symbols in the tree representation of data model o Explanation of symbols in the tree representation of data model
hierarchy. hierarchy.
E.14. Changes Between Versions -00 and -01 E.15. Changes Between Versions -00 and -01
o AFN/SAFI-independent stuff was moved to the "ietf-routing" module. o AFN/SAFI-independent stuff was moved to the "ietf-routing" module.
o Typedefs for AFN and SAFI were placed in a separate "iana-afn- o Typedefs for AFN and SAFI were placed in a separate "iana-afn-
safi" module. safi" module.
o Names of some data nodes were changed, in particular "routing- o Names of some data nodes were changed, in particular "routing-
process" is now "router". process" is now "router".
o The restriction of a single AFN/SAFI per router was lifted. o The restriction of a single AFN/SAFI per router was lifted.
 End of changes. 58 change blocks. 
86 lines changed or deleted 89 lines changed or added

This html diff was produced by rfcdiff 1.48. The latest version is available from http://tools.ietf.org/tools/rfcdiff/