< draft-ietf-psamp-mib-05.txt		draft-ietf-psamp-mib-06.txt >
	Network Working Group T. Dietz, Ed.		Network Working Group T. Dietz, Ed.
	Internet-Draft NEC Europte Ltd.		Internet-Draft NEC Europte Ltd.
	Expires: April 27, 2006 B. Claise		Expires: December 25, 2006 B. Claise
	Cisco Systems		Cisco Systems
	October 24, 2005		June 23, 2006
	Definitions of Managed Objects for Packet Sampling		Definitions of Managed Objects for Packet Sampling
	draft-ietf-psamp-mib-05.txt		<draft-ietf-psamp-mib-06.txt>
	Status of this Memo		Status of this Memo
	By submitting this Internet-Draft, each author represents that any		By submitting this Internet-Draft, each author represents that any
	applicable patent or other IPR claims of which he or she is aware		applicable patent or other IPR claims of which he or she is aware
	have been or will be disclosed, and any of which he or she becomes		have been or will be disclosed, and any of which he or she becomes
	aware will be disclosed, in accordance with Section 6 of BCP 79.		aware will be disclosed, in accordance with Section 6 of BCP 79.
	Internet-Drafts are working documents of the Internet Engineering		Internet-Drafts are working documents of the Internet Engineering
	Task Force (IETF), its areas, and its working groups. Note that		Task Force (IETF), its areas, and its working groups. Note that
	skipping to change at page 1, line 35 ¶		skipping to change at page 1, line 35 ¶
	and may be updated, replaced, or obsoleted by other documents at any		and may be updated, replaced, or obsoleted by other documents at any
	time. It is inappropriate to use Internet-Drafts as reference		time. It is inappropriate to use Internet-Drafts as reference
	material or to cite them other than as "work in progress."		material or to cite them other than as "work in progress."
	The list of current Internet-Drafts can be accessed at		The list of current Internet-Drafts can be accessed at
	http://www.ietf.org/ietf/1id-abstracts.txt.		http://www.ietf.org/ietf/1id-abstracts.txt.
	The list of Internet-Draft Shadow Directories can be accessed at		The list of Internet-Draft Shadow Directories can be accessed at
	http://www.ietf.org/shadow.html.		http://www.ietf.org/shadow.html.
	This Internet-Draft will expire on April 27, 2006.		This Internet-Draft will expire on December 25, 2006.
	Copyright Notice		Copyright Notice
	Copyright (C) The Internet Society (2005).		Copyright (C) The Internet Society (2006).
	Abstract		Abstract
	This memo defines managed objects for sampling and filtering		This memo defines managed objects for sampling and filtering
	techniques for IP packet selection. These objects provide		techniques for IP packet selection. These objects provide
	information about managed nodes supporting packet sampling, including		information about managed nodes supporting packet sampling, including
	packet sampling capabilities, configuration and statistics. They		packet sampling capabilities and configuration. They also allow to
	also allow to configure packet sampling concerning the IP interface		configure packet sampling concerning the IP interface at which
	at which packets are sampled, the packet selections methods used for		packets are sampled and the packet selections methods used for
	sampling, and the collector to which packet samples are exported.		sampling.
	Table of Contents		Table of Contents
	1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3		1. Open Issues/TODOs . . . . . . . . . . . . . . . . . . . . . . 3
	1.1. Points of Discussion . . . . . . . . . . . . . . . . . . . 3
	2. PSAMP Documents Overview . . . . . . . . . . . . . . . . . . . 6
	3. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 6
	3.1. Base Association . . . . . . . . . . . . . . . . . . . . . 6
	4. The Internet-Standard Management Framework . . . . . . . . . . 6
	5. Structure of the PSAMP MIB module . . . . . . . . . . . . . . 7
	5.1. TEXTUAL CONVENTIONS . . . . . . . . . . . . . . . . . . . 7
	5.2. The Selection Methods . . . . . . . . . . . . . . . . . . 8
	5.2.1. Selecting All Packets . . . . . . . . . . . . . . . . 8
	5.2.2. Systematic Count-based Sampling . . . . . . . . . . . 8
	5.2.3. Systematic Time-based Sampling . . . . . . . . . . . . 9
	5.2.4. Random n-out-of-N Sampling . . . . . . . . . . . . . . 9
	5.2.5. Uniform Probabilistic Sampling . . . . . . . . . . . . 9
	5.2.6. Non-Uniform Probabilistic Sampling . . . . . . . . . . 9
	5.2.7. Flow State Sampling . . . . . . . . . . . . . . . . . 10
	5.2.8. Match Filtering . . . . . . . . . . . . . . . . . . . 10
	5.2.9. Hash Filtering . . . . . . . . . . . . . . . . . . . . 10
	5.2.10. Router State Filtering . . . . . . . . . . . . . . . . 11
	5.3. The Hash Functions . . . . . . . . . . . . . . . . . . . . 12
	5.4. The Reporting . . . . . . . . . . . . . . . . . . . . . . 12
	5.5. The Base Associations . . . . . . . . . . . . . . . . . . 12
	6. Definition . . . . . . . . . . . . . . . . . . . . . . . . . . 14
	7. Security Considerations . . . . . . . . . . . . . . . . . . . 60
	8. Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . 60
	9. References . . . . . . . . . . . . . . . . . . . . . . . . . . 60
	9.1. Normative References . . . . . . . . . . . . . . . . . . . 60
	9.2. Informative References . . . . . . . . . . . . . . . . . . 61
	Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 62
	Intellectual Property and Copyright Statements . . . . . . . . . . 63
	1. Introduction
	The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
	"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
	document are to be interpreted as described in RFC 2119 [8].
	This document is a product of the Packet Sampling (PSAMP) working
	group. Its purpose is to define standards-based MIB modules for
	monitoring and configuring PSAMP devices performing packet selection
	by sampling, filtering and hashing.
	It is assumed that packet sampling is performed according to the
	framework defined in [1]. Packet selection methods considered in the
	MIB module are specified in [2]. Configuration of the export of
	packet samples to a collector is modeled according to [3].
	1.1. Points of Discussion
	This section covers the open issues, still to be resolved/updated in
	this draft.
	MIB-1: Title should include sampling and filtering not only sampling.
	The titles of all documents not only the MIB document should
	reflect that.
	MIB-2: We are missing some examples, such as slide 8 of PSAMP-MIB-
	IETF60.ppt. It is planned to integrate a entity relationship
	diagram plus some examples in the next version. Examples should
	always display named OIDs otherwise they are difficult to
	understand.
	MIB-3: Do we want to be consistent with the upper cases in the
	terminology? Do we want to say a note about it in the terminology
	section. Something such as: "all terms in upper cases are defined
	in..." or "all referenced terminology are written with an upper
	case"
	MIB-4: The following caese definitively requires some more
	explanation, with some examples.
	* When you refers to an OID for the interface, you don't specify
	if we need the OID for the ifIndex, for the ifDescr, for
	something else
	* When you refer to an OID for a function, an example is needed
	* When you refer to an OID for set of input parameters, which OID
	do we need? What if there are multiple indexes in the table?
	Thus a new section about undefined function, parameters and
	observation point is really needed.
	MIB-5: The section on hash filtering is difficult to understand. We
	have some terms defined. And we don't use them. Hence if I would
	have to implement this MIB, I would not be sure at all what to put
	in there.
	I would like to have a structure with:		2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
	IN;
	Parameter1
	Parameter2
	...
	OUT
	Parameter1
	Parameter2
	MIB-6: Question: as far as I recall (but I could be wrong), when		3. PSAMP Documents Overview . . . . . . . . . . . . . . . . . . . 3
	using the RowStatus, we have to speficy the minimum set of MIB
	variables in that table that need to be set in order for the
	status to go to "create", i.e. the states information. That's one
	of biggest missing things.
	MIB-7: psampSampNonUniProbFuncParam OBJECT-TYPE: here we must explain		4. The Internet-Standard Management Framework . . . . . . . . . . 4
	how to do when several input parameters references are needed!
	See also MIB-2 and MIB-4.
	MIB-8: psampFilterHashPayloadBytes OBJECT-TYPE: What does Payload		5. Structure of the PSAMP MIB module . . . . . . . . . . . . . . 4
	mean? Above layer 4? It is not specified in [2].		5.1. The Sampling Group . . . . . . . . . . . . . . . . . . . . 5
			5.1.1. Selecting All Packets . . . . . . . . . . . . . . . . 5
			5.1.2. Systematic Count-based Sampling . . . . . . . . . . . 6
			5.1.3. Systematic Time-based Sampling . . . . . . . . . . . . 6
			5.1.4. Random n-out-of-N Sampling . . . . . . . . . . . . . . 6
			5.1.5. Uniform Probabilistic Sampling . . . . . . . . . . . . 6
			5.1.6. Non-Uniform Probabilistic Sampling . . . . . . . . . . 7
			5.1.7. Flow State Sampling . . . . . . . . . . . . . . . . . 7
			5.2. The Filtering Methods Group . . . . . . . . . . . . . . . 7
			5.2.1. Match Filtering . . . . . . . . . . . . . . . . . . . 7
			5.2.2. Hash Filtering . . . . . . . . . . . . . . . . . . . . 7
			5.2.3. Router State Filtering . . . . . . . . . . . . . . . . 8
			5.3. The Hash Functions Group . . . . . . . . . . . . . . . . . 9
	MIB-9: psampFilterRState OBJECT IDENTIFIER: Try to rename to		6. Definition . . . . . . . . . . . . . . . . . . . . . . . . . . 10
	RouterState if maximum OID name length of 32 chars is not
	exceeded.
	MIB-10: psampFilterRStateAvail OBJECT-TYPE: It should be specified		7. Security Considerations . . . . . . . . . . . . . . . . . . . 43
	when this object is "available". It should be available when one
	of the given functions is available."
	MIB-11: PsampFilterRStateParamSetEntry: Specifically in this case, we		8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 43
	need to define which minimum set of MIB variable should be set up
	for the entry to go "createandgo". For example, is
	psampFilterRStateVendorFunc enough? See aslo MIB-6.
	MIB-12: We are missing the observation domain in both the PSAMP-MIB		9. Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . 43
	PsampBaseAssocEntry and PSAMP-TECH document.
	MIB-13: psampBaseAssoceObservationPoint OBJECT-TYPE: Where should the		10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 43
	OID point to? ifIndex, ifDescr?		10.1. Normative References . . . . . . . . . . . . . . . . . . . 43
			10.2. Informative References . . . . . . . . . . . . . . . . . . 44
	MIB-14: Capitalization should be consistent throughout the document.		Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 45
	Maybe the solution is to list all reference terms from PSAMP and		Intellectual Property and Copyright Statements . . . . . . . . . . 46
	IPFIX drafts (the ones used in the draft). So just a list, with
	no definition, in the terminology section. Feedback?
	MIB-15: Consistent usage of data types (especially Unsigned32 and		1. Open Issues/TODOs
	Integer32 with ranges) must be checked! Not sure if especially an		o Align MIB with other drafts, esp. the Sampling Techniques one.
	index can be Unsigned32, if he must have a limited range, etc.		o Is the selecting all method mandatory for all implementations?
	Can some experts speak up?		o Describe row status objects to writable tables.
			o Elaborate conformance statements.
			o Add option template id to each parameter set for exporting option
			data.
			o Check data type for "microseconds", protocol type, port, template
			id and maybe some others.
			o Need to achieve a common layout and naming on the different MIB
			parts.
			o Elaborate security considerations, particularly concerning SET
			operations.
	MIB-16: Hash filtering again (see also MIB-5). The hash filtering		2. Introduction
	group is confusing because it was specified before the hash
	function group. We mainly care about the hash function defined in
	the appendix of PSAMP-TECH, so why do we have this group before
	the hash function group and do we have this group at all. If
	someone would like to specify a new hash function, he will
	potentially have a new RFC and part of it, the new MIB OID for
	this specific hash function could be specified.
	So we could just introduce two hash filtering method (IPSX and		The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
	Bob) specified in the PSAMP-TECH document and leave other hash		"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
	functions to extended drafts. But what about vendor specific hash		document are to be interpreted as described in RFC 2119 [RFC2119].
	functions?? How do we know they exist??
	Potentially because a vendor would produce a new private MIB?		This document is a product of the Packet Sampling (PSAMP) working
	Maybe a question for the mailing list! We mainly need the hash		group. Its purpose is to define standards-based MIB modules for
	function in hardware, where it can not be changed so easily as		monitoring and configuring PSAMP devices performing packet selection
	changing a mib.		by sampling, filtering and hashing.
	MIB-17: Hash filtering again (see also MIB-5 and MIB-16). Question		It is assumed that packet sampling is performed according to the
	of security! Do we want to be able to read all of the values in		framework defined in [I-D.ietf-psamp-framework]. Packet selection
	PsampFilterHashParamSetEntry. Including the output of the hash		methods considered in the MIB module are specified in [I-D.ietf-
	function? Could an attacker with SNMP read access deduce what		psamp-sample-tech]. Configuration of the export of packet samples to
	type of traffic to send to manipulate the NMS application? Do we		a collector is modeled according to [I-D.ietf-psamp-protocol]. The
	want to export all the 10 parameters in PSAMP export? Does		exporter uses the IPFIX protocol as specified in [I-D.ietf-ipfix-
	PSAMP-FW requires it? See "6.2.2 Guarding Against Pitfalls and		protocol].
	Vulnerabilities". So the best thing to do is to ask Nick and
	Tanja.
	MIB-18: Router State Filtering (see also MIB-10). It might be easier		The MIB presented here is a module of the IPFIX MIB [I-D.dietz-ipfix-
	with subtables for each router state function. That would also		mib]. It starts at an Object ID in the IPFIX MIB and imports the
	clarify the point of psampFilterRStateAvail: one capability per		textual conventions defined there.
	function -> that make more sense. That would also solve MIB-10.
	We can extend with new methods easily.
	2. PSAMP Documents Overview		3. PSAMP Documents Overview
	[PSAMP-FW]: "A Framework for Packet Selection and Reporting" The		PSAMP Framework: [I-D.ietf-psamp-framework] "A Framework for Packet
	document describes the PSAMP framework for network elements to		Selection and Reporting" The document describes the PSAMP
	select subsets of packets by statistical and other methods, and to		framework for network elements to select subsets of packets by
	export a stream of reports on the selected packets to a collector.		statistical and other methods, and to export a stream of reports
	Definitions of terminology and the use of the terms "must",		on the selected packets to a collector. Definitions of
	"should" and "may" in this document are informational only.		terminology and the use of the terms "must", "should" and "may" in
			this document are informational only.
	[PSAMP-TECH]: "Sampling and Filtering Techniques for IP Packet		PSAMP Sampling Techniques: [I-D.ietf-psamp-sample-tech] "Sampling and
	Selection", describes the set of packet selection techniques		Filtering Techniques for IP Packet Selection", describes the set
	supported by PSAMP.		of packet selection techniques supported by PSAMP.
	PSAMP-MIB: "Definitions of Managed Objects for Packet Sampling" (this		PSAMP MIB: "Definitions of Managed Objects for Packet Sampling" (this
	document) describes the PSAMP Management Information Base.		document) describes the PSAMP Management Information Base.
	[PSAMP-PROTO]: "Packet Sampling (PSAMP) Protocol Specifications"		PSAMP Protocol: [I-D.ietf-psamp-protocol] "Packet Sampling (PSAMP)
	specifies the export of packet information from a PSAMP Exporting		Protocol Specifications" specifies the export of packet
	Process to a PSAMP Colleting Process.		information from a PSAMP Exporting Process to a PSAMP Colleting
			Process.
	[PSAMP-INFO]: "Information Model for Packet Sampling Exports" defines
	an information and data model for PSAMP.
	3. Terminology
	The PSAMP terminology defined here includes (and is consistent with)
	all terms listed in [2]. We here define additional terms required
	for the definition of managed objects. An architecture overview and
	possible configurations of PSAMP elements can be found in [1].
	Detailed definitions of selectors can be found in [2]. PSAMP
	terminology also aims to be consistent with terms used in [9]. The
	relationship between some PSAMP and IPFIX terms is described in [1].
	3.1. Base Association		PSAMP Information Model: [I-D.ietf-psamp-info] "Information Model for
			Packet Sampling Exports" defines an information and data model for
			PSAMP.
	The Base Association combines several values defined at a PSAMP		Section 5 describes the structure of the PSAMP MIB module and section
	device. It is derived from the ASSOCIATION defined in [2] section 7.		6 contains the formal definition. Security issues are finally
	It contains references to an Observation Point, a template record, a		discussed in section 7.
	list of Collectors, a list of Selectors and process ids of the
	metering and the reporting process. It associates these values to
	specify one Measurement Process on the PSAMP device. Several
	Measurement Processes can be defined on the PSAMP device and every
	Measurement Process will be described by a Base Association.
	4. The Internet-Standard Management Framework		4. The Internet-Standard Management Framework
	For a detailed overview of the documents that describe the current		For a detailed overview of the documents that describe the current
	Internet-Standard Management Framework, please refer to section 7 of		Internet-Standard Management Framework, please refer to section 7 of
	RFC 3410 [10].		RFC 3410 [RFC3410].
	Managed objects are accessed via a virtual information store, termed		Managed objects are accessed via a virtual information store, termed
	the Management Information Base or MIB. MIB objects are generally		the Management Information Base or MIB. MIB objects are generally
	accessed through the Simple Network Management Protocol (SNMP).		accessed through the Simple Network Management Protocol (SNMP).
	Objects in the MIB are defined using the mechanisms defined in the		Objects in the MIB are defined using the mechanisms defined in the
	Structure of Management Information (SMI). This memo specifies a MIB		Structure of Management Information (SMI). This memo specifies a MIB
	module that is compliant to the SMIv2, which is described in STD 58,		module that is compliant to the SMIv2, which is described in STD 58,
	RFC 2578 [4], STD 58, RFC 2579 [5] and STD 58, RFC 2580 [6].		RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
			[RFC2580].
	5. Structure of the PSAMP MIB module		5. Structure of the PSAMP MIB module
	The PSAMP MIB module follows the structures given in [1] and [2].		The PSAMP MIB module is structure according to the sample techniques
	The psampBaseAssociations subtree builds the heart of the PSAMP MIB.		document [I-D.ietf-psamp-sample-tech]. The main structure follows
	This subtree models the values described by the Base Association.		the building blocks of the PSAMP framework [I-D.ietf-psamp-
	The psampBaseAssocTable contains one entry per Base Association. The		framework], describing sampling/filtering at an observation point
	list of Selectors is modelled by a second table the		then exporting the collected information to one or more collectors.
	psampSelectorListTable. This table is linked to the		The objects needed for exporting the information and describing and
	psampBaseAssocTable by the first index which is the		configuring the selection methods used in the metering process are
	psampBaseAssocIndex. A psampBaseAssocEntry also references an entry		already defined in the IPFIX MIB Exporter Module [I-D.dietz-ipfix-
	in the psampTemplateRecordTable and the psampCollectorGroupTable to		mib].
	link the metering process with the reporting process.
	Every selection method described in [2] gets its own subtree in the
	PSAMP MIB. The subtree always contains a capability section and a
	parameter set table. So several parameter sets can be defined for
	each selection method. The parameter set is linked to the Base
	Association by an entry in the psampSelectorListTable. The
	psampSelectorListMethod point to the first object id of a parameter
	set entry. The hash functions proposed in [2] are modelled in a
	similar way as the selection methods and are referenced by a
	psampFilterHashParamSetEntry.
	The reporting and exporting processes are modeled by the
	psampCollectorTable, the psampCollectorGroupTable and the
	psampTemplateRecordTable. The psampTemplateRecordTable contains
	Template Records as defined by the IPFIX protocol. They are used to
	export the selected packets to the collectors. The collectors itself
	are modelled in the psampCollectorTable and the
	psampCollectorGroupTable combines several Collectors to which the
	packet reports are sent simultaniously.
	5.1. TEXTUAL CONVENTIONS		The PSAMP MIB Module contains parameter sets for the sampling and
			filtering methods described in [I-D.ietf-psamp-sample-tech]. The
			sampling and filtering methods and their parameter sets are
			controlled by three groups of objects: The sampling group, the
			filtering group and the hash functions group. The sampling group and
			the filtering group define the parameters for the sampling and
			filtering methods. The hash functions group defines the available
			hash functions for hash based filtering. Finally we have the
			statistics group that represent all objects collecting the optional
			statistical values like packets observed by a hash function or
			reports sent to a collector.
	The PSAMP MIB defines one new textual convention, the		In the next sections we will briefly describe every object group and
	PsampMethodAvailability. It is used as SYNTAX of all those objects		its usage.
	that indicate if a selection method or hash function is available in
	a specific implementation of a PSAMP device.
	5.2. The Selection Methods		5.1. The Sampling Group
	The first group of objects contains information about sampling		The first group of objects contains information about sampling
	methods and filtering methods. Each method is covered by an		methods. Each sampling method is covered by an individual sub-tree
	individual subtree. Expect for the first method that corresponds to		of this group. The following objects are defined for each method
	the exceptional selection of all packets, the following objects are		except the first: a sub-group of objects indicating specific
	defined for each method: a subtree of objects indicating specific
	capabilities and limits of the method that may be empty if no		capabilities and limits of the method that may be empty if no
	capabilities or limits are available, and a subtree specifying sets		capabilities or limits are available, and a sub-group specifying sets
	of parameters in a table. Each row in the parameter set table		of parameters in a table. Each row in the parameter set table
	uniquely specifies all parameters of a packet selection process of		uniquely specifies all parameters of a packet sampling instance of
	the method. Also all parameters sets contain a row status.		the method. Also all parameters sets contain a row status.
	The PSAMP MIB covers all methods and their parameters specified in		Methods and parameters of methods are specified in [I-D.ietf-psamp-
	[2]. If the given methods could be extended by some implementation		sample-tech]. The PSAMP MIB document specifies all methods defined
	dependent functionality the MIB contains objects that reference an		in the sample tech document. If some object need further
	OBJECT IDENTIFIER. These objects are used as pointers to functions		specification then OBJECT IDENTIFIERS are used as pointers to
	or parameters that are out of the scope of this document. These		functions or parameters that are out of the scope of this document.
	functions or parameters can be either vendor specific or may be		They can be implemented in a vendor specific way or may be documented
	documented in an additional standard document or an updated version		in another document or a later version of this document. An
	of this document. An implementer may specify e.g., one or more		implementer may specify e.g., one or more functions used for non-
	functions used for non-uniform probabilistic sampling, additional		uniform probabilistic sampling. The seven methods specified in this
	router state matches or additional hash functions for hash filtering.		document are selecting all, systematic count-based sampling,
			systematic time-based sampling, random n-out-of-N sampling, uniform
			probabilistic sampling, non-uniform probabilistic sampling and flow
			state sampling.
	5.2.1. Selecting All Packets		5.1.1. Selecting All Packets
	This is the most trivial packet selection method. If it is applied,		This trivial packet selection method is alway available. If it is
	all packets will be selected.		applied, all packets will be selected.
	5.2.2. Systematic Count-based Sampling		5.1.2. Systematic Count-based Sampling
	Count-based sampling means, that all packets that arrive in this		The systematic count-based sampling method has two capability
	packet interval are selected. The spacing parameter defines the		objects: The psampSampCountBasedMaxInterval object indicates the
	spacing in number of packets between the end of one sampling interval		maximum sampling interval in packets supported by the implementation,
	and the start of the next succeeding interval. The systematic count-		whereas psampSampCountBasedMaxSpacing indicates the maximum spacing
	based sampling method has two capability objects: The		in packets supported by the implementation.
	psampSampCountBasedMaxInterval object indicates the maximum sampling
	interval supported by the implementation, whereas
	psampSampCountBasedMinSpacing indicates the minimum spacing supported
	by the implementation.
	Finally the psampSampCountBasedParamSetTable contains two parameters:		Finally the psampSampCountBasedParamSetTable contains two parameters:
	the sampling interval length and the spacing specified in number of		the sampling interval length and the spacing specified in numbers of
	packets.		packets.
	5.2.3. Systematic Time-based Sampling		5.1.3. Systematic Time-based Sampling
	Time-based sampling means, that all packets that arrive in this time		The systematic time-based sampling method has two capability objects:
	interval are selected. The spacing parameter defines the spacing in		psampSampTimeBasedMaxInterval indicates the maximum sampling interval
	time between the end of one sampling interval and the start of the		in microseconds supported by the implementation, whereas
	next succeeding interval. The systematic time-based sampling methods		psampSampTimeBasedMaxSpacing indicates the maximum spacing in
	have two capability objects: The psampSampTimeBasedMaxInterval object		microseconds supported by the implementation.
	indicates the maximum sampling interval supported by the
	implementation, whereas psampSampTimeBasedMinSpacing indicates the
	minimum spacing supported by the implementation: both MIB objects
	units are specified in microseconds.
	Finally the psampSampTimeBasedParamSetTable contains two parameters:		Finally the psampSampTimeBasedParamSetTable contains two parameters:
	the sampling interval length and the spacing specified in number of		the sampling interval length and the spacing specified in
	microseconds.		microseconds.
	5.2.4. Random n-out-of-N Sampling		5.1.4. Random n-out-of-N Sampling
	The random n-out-of-N sampling method has one capability object:		The random n-out-of-N sampling method has two capability objects:
	psampSampRandOutOfNMaxPopulation specifying the maximum population N.		psampSampRandOutOfNMaxPopulation specifying the maximum population N,
			and psampSampRandOutOfNMaxSample the maximum size of n supported by
			the implementation.
	The random n-out-of-N sampling method has also two parameter objects		The random n-out-of-N sampling method has also two parameter objects
	in the psampSampRandOutOfNParamSetTable. The first one is		in the psampSampRandOutOfNParamSetTable. The first one is
	psampSampRandOutOfNPopulation and gives the number of elements N in		psampSampRandOutOfNPopulation and gives the number of elements N in
	the parent population. The second psampSampRandOutOfNSample gives		the parent population. The second psampSampRandOutOfNSample gives
	the number of elements n taken from the parent population N. With		the number of elements n taken from the parent population N. With
	these two parameters you sample n packets out of N.		these two parameters you sample n packets out of N.
	5.2.5. Uniform Probabilistic Sampling		5.1.5. Uniform Probabilistic Sampling
	Capability objects are not specified for the uniform probabilistic		The uniform probabilistic sampling method has no capabilities and
	sampling method. It has only one parameter in the		only one parameter in the psampSampUniProbParamSetTable, the
	psampSampUniProbParamSetTable, the psampSampUniProbProbability. This		psampSampUniProbProbability. This object gives the probability that
	object gives the probability that a packet is sampled. The		a packet is sampled. The probability is equal for every packet. The
	probability is equal for every packet. The given value must be		given value must be divided by 4294967295 (=2^32-1), so a value of 0
	divided by 4294967295 (=2^32-1), so a value of 0 means no packet is		means no packet is sampled (probability is 0) and a value of
	sampled (probability is 0) and a value of 4294967295 means every		4294967295 means every packet is sampled (probability is 1).
	packet is sampled (probability is 1).
	5.2.6. Non-Uniform Probabilistic Sampling		5.1.6. Non-Uniform Probabilistic Sampling
	Capability objects are not specified for the non-uniform		The non-uniform probabilistic sampling method has also no
	probabilistic sampling method. The psampSampNonUniProbParamSetTable		capabilities defined. The psampSampNonUniProbParamSetTable contains
	contains two parameters, the psampSampNonUniProbFunction and the		two parameters, the psampSampNonUniProbFunction and the
	psampSampNonUniProbFuncParam. Those two objects point to the		psampSampNonUniProbFuncParam. Those two objects point to the
	function that computes the probability that a packet is sampled and		function that computes the probability that a packet is sampled and
	the parameters used for that function. The definition of the		the parameters used for that function. The definition of the
	function and its parameters is implementation dependent and beyond		function and its parameters is implementation dependent and beyond
	the scope of this document.		the scope of this document.
	5.2.7. Flow State Sampling		5.1.7. Flow State Sampling
	Capability objects are not specified for the flow state sampling		The capabilities and parameter set of the flow state sampling method
	method. The psampSampFlowStateParamSetTable holds two parameters		are equal to those of the non-uniform probabilistic sampling method.
	pointing to the flow state function and the parameters used by the		There are no capabilities defined and the
	flow state function (psampSampFlowStateFunction and		psampSampFlowStateParamSetTable hold two parameters pointing to the
			flow state function and the parameters used by the flow state
			function (psampSampFlowStateFunction and
	psampSampFlowStateFuncParam). Again the function and its parameters		psampSampFlowStateFuncParam). Again the function and its parameters
	are implementation dependent and beyond the scope of this document.		are implementation dependent and beyond the scope of this document.
	5.2.8. Match Filtering		5.2. The Filtering Methods Group
	Capability objects are not specified for the match filtering method.		The second group contains information about the filtering methods.
	It contains four parameters in the psampFilterMatchParamSetTable: The		This group is build up similarly to the sampling methods group. It
	psampFilterMatchFieldId contain the PSAMP or IPFIX information		currently contains three filtering methods, the match filtering, the
	element id defined in the information model [7], [11]. The		hash filtering and the router state filtering.
			5.2.1. Match Filtering
			The match filtering method has no capabilities defined and contains
			four parameters in the psampFilterMatchParamSetTable: The
			psampFilterMatchFieldId contain the PSAMP or IPFIX field id defined
			in the information model as reference what to match. The
	psampFilterMatchStartValue and psampFilterMatchStopValue contain the		psampFilterMatchStartValue and psampFilterMatchStopValue contain the
	start and stop value to match the content against. In this way you		start and stop value to match the content against. In this way you
	can match e.g., a range x-z of transport protocol ports by specifying		can match e.g., a range x-z of transport protocol ports by specifying
	the field id that represents the transport protocol port and giving x		the field id that represents the transport protocol port and giving x
	as start value and y as stop value. If a single value should be		as start value and y as stop value. If a single value should be
	matched than start and stop value must be equal. A mask		matched than start and stop value must be equal. A mask
	psampFilterMatchMask can be applied if it is applicable for the field		psampFilterMatchMask can be applied if it is applicable for the field
	id. The encoding of the values is dependent on the field id and has		id. The encoding of the values is dependent on the field id and has
	to be done according to the PSAMP protocol document.		to be done according to the PSAMP protocol document.
	5.2.9. Hash Filtering		5.2.2. Hash Filtering
	Capability objects are not specified for the hash filtering method.		Capabilities are not specified for the hash filtering method. But
	But according to the sample tech document [2] ten parameters are		according to the sample tech document [I-D.ietf-psamp-sample-tech]
	defined in the psampFilterHashParamSetTable. The		ten parameters are defined in the psampFilterHashParamSetTable. The
	psampFilterHashAddrType specifies the address type to hash - either		psampFilterHashAddrType specifies the address type to hash - either
	IPv4 or IPv6. Then psampFilterHashHeaderBits specifies a bit mask		IPv4 or IPv6. Then psampFilterHashHeaderBits specifies a bit mask
	applied to the packet header selecting the bits to hash from the		applied to the packet header selecting the bits to hash from the
	packet header. Then psampFilterHashPayloadBytes gives the number of		packet header. Then psampFilterHashPayloadBytes gives the number of
	payload bytes that should be included in the hashing. The final bits		payload bytes that should be included in the hashing. The final bits
	that are selected from the payload bytes are masked with the		that are selected from the payload bytes are masked with the
	psampFilterHashPayloadBits.		psampFilterHashPayloadBits.
	The above parameters specified what gets feed into the hash function.		The above parameters specified what gets feed into the hash function.
	The following parameters specify the hash function itself. The		The following parameters specify the hash function itself. The
	psampFilterHashFunction points to a hash function and		psampFilterHashFunction points to a hash function and
	psampFilterHashFuncParam point to a function specific parameter set		psampFilterHashFuncParam point to a function specific parameter set
	for the hashing function. The number of input and output bits for		for the hashing function. The number of input and output bits for
	the hash function is specified with psampFilterHashInputBits and		the hash function is specified with psampFilterHashInputBits and
	psampFilterHashOutputBits. Finally the output may be masked with the		psampFilterHashOutputBits. Finally the output may be masked with the
	psampFilterHashOutputMask. The results gained by applying all those		psampFilterHashOutputMask. The results gained by applying all those
	parameters are then compared with the psampFilterHashSelection. The		parameters are then compared with the psampFilterHashSelection. The
	psampFilterHashSelection contains the hash value ranges or single		psampFilterHashSelection contains the hash value ranges or single
	hash values that get selected. The psampFilterHashSelection is a		hash values that get selected. The psampFilterHashSelection is a
	human readable string containing only the ASCII characters 0-9, a-f,		human readable string containing only the ASCII characters 0-9, a-f,
	comma(,) and dash(-).		comma(,) and dash(-). The ASCII string is defined as follows:
			selections := selection | selections,selection
			selection := range | value
			range := value-value
			value := 0x[0-9,a-f]* | [1-9][0-9]*
	The two hash functions given in the sample tech document can be		The two hash functions given in the sample tech document can be
	referenced within this parameter set table and are also contained in		referenced within this parameter set table and are also contained in
	this PSAMP MIB document.		this PSAMP MIB document.
	5.2.10. Router State Filtering		5.2.3. Router State Filtering
	Capability objects are not specified for the router state filtering		The router state filtering does also not specify any capabilities.
	method. The parameter table psampFilterRStateParamSetTable contains		The parameter table psampFilterRStateParamSetTable contains six
	six parameters to specify the router state to filter against. The		parameters to specify the router state to filter against. The first
	first object psampFilterRStateFunction defines one of nine functions		object psampFilterRStateFunction defines one of nine functions that
	that may be used as router state.		may be used as router state.
	other: an other router state function that is not defined here. Then		other: an other router state function that is not defined here. Then
	psampFilterRStateVendorFunc points to the implementation specific		psampFilterRStateVendorFunc points to the implementation specific
	function that is used.		function that is used.
	ingressIf: packets that enter the PSAMP device at the interface		ingressIf: packets that enter the probe at the interface specified by
	specified by psampFilterRStateIfIndex are matched.		psampFilterRStateIfIndex are matched.
	egressIf: packets that leave the PSAMP device at the interface		egressIf: packets that leave the probe at the interface specified by
	specified by psampFilterRStateIfIndex are matched.		psampFilterRStateIfIndex are matched.
	aclViolation: packets that violate the access control list are		aclViolation: packets that violate the access control list are
	matched.		matched.
	rpfFailure: packets for which the reverse path forwarding fails are		rpfFailure: packets for that the reverse path forwarding fails are
	matched.		matched.
	noResources: packets for which not enough resources are allocated		noResources: packets for that not enough resources are allocated will
	will be matched.		be matched.
	noRoute: packets that could not be routed further are matched.		noRoute: packets that could not be routed further are matched.
	originAS: packets that originate in an autonomous system specified by		originAS: packets that originate in an autonomous system specified by
	the range of psampFilterRStateStartAS and psampFilterRStateStopAS		the range of psampFilterRStateStartAS and psampFilterRStateStopAS
	are matched.		are matched.
	destAS: packets whose destination is in an autonomous system		destAS: packets whose destination is in an autonomous system
	specified by the range of psampFilterRStateStartAS and		specified by the range of psampFilterRStateStartAS and
	psampFilterRStateStopAS are matched.		psampFilterRStateStopAS are matched.
	skipping to change at page 12, line 4 ¶		skipping to change at page 9, line 31 ¶
	originAS: packets that originate in an autonomous system specified by		originAS: packets that originate in an autonomous system specified by
	the range of psampFilterRStateStartAS and psampFilterRStateStopAS		the range of psampFilterRStateStartAS and psampFilterRStateStopAS
	are matched.		are matched.
	destAS: packets whose destination is in an autonomous system		destAS: packets whose destination is in an autonomous system
	specified by the range of psampFilterRStateStartAS and		specified by the range of psampFilterRStateStartAS and
	psampFilterRStateStopAS are matched.		psampFilterRStateStopAS are matched.
	The parameter psampFilterRStateIfIndex defaults to 0 if not used.		The parameter psampFilterRStateIfIndex defaults to 0 if not used.
	The parameters psampFilterRStateStartAS and psampFilterRStateStopAS		The parameters psampFilterRStateStartAS and psampFilterRStateStopAS
	default to 0 if they are not used. If a single autonomous system		default to 0 if they are not used. If a single autonomous system
	number should be matched psampFilterRStateStopAS remains 0.		number should be matched psampFilterRStateStopAS remains 0.
	5.3. The Hash Functions		5.3. The Hash Functions Group
	The hash function subtree specifies the two hash functions defined in		The hash function group specifies the two hash functions defined in
	the sample tech document [2]. The hash functions are defined here so		the sample tech document [I-D.ietf-psamp-sample-tech]. The hash
	that they can be referenced by the hash filter above. The design of		functions are defined here so that they can be referenced by the hash
	the hash function part of the MIB SHOULD be taken as a guideline for		filter above. The design of the hash function part of the MIB SHOULD
	vendor specific hash function definitions.		be taken as a guideline for vendor specific hash function
			definitions.
	The two hash functions IPSX and Bob have both an empty parameter set		The two hash functions IPSX and Bob have both an empty parameter set
	table since they both take now additional parameters than those		table since they both take now additional parameters than those
	specified in the hash filter method. Other hash functions of course		specified in the hash filter method. Other hash functions of course
	could specify additional parameters.		could specify additional parameters.
	5.4. The Reporting
	The reporting subtree of managed objects provides information on
	collectors to which selected packets (sampled, filtered, or hashed)
	are exported and they allow to configure collectors. The group
	contains two tables, the psampCollectorTable and the
	psampCollectorGroupTable.
	Each entry in the psampCollectorTable specifies a collector by its IP
	address, used transport protocol and port number. Also it contains
	the number of reports sent to this collector. The default transport
	protocol is SCTP.
	The psampCollectorGroupTable groups one or more collectors to a set
	of collectors where sampled packets are sent to simultaneously. Thus
	reporting to more than one collector at the same time is possible.
	5.5. The Base Associations
	The objects in the Base Asssociations subtree combine all the objects
	needed to model the measurement processes on the PSAMP device. It
	contains three tables, the psampBaseAssocTable, the
	psampSelectorListTable and the psampTemplateRecordTable. Each entry
	of the psampBaseAssocTable describes one measurement process on the
	PSAMP device. The observation point is given as a pointer to another
	object in psampBaseAssoceObservationPoint. This other object could
	be an entry in the mib-II interface table or any other interface
	point where you can observe packets. The
	psampBaseAssocTemplateRecordId gives the template record id used to
	link the data gathered in the metering process to an export format
	described in the information model of the PSAMP framework. The
	collectors where the data packets should be sent are specified by
	their index in the psampCollectorGroupTable. In addition the process
	id of the metering process and the process id of the exporting
	process used for this instance is saved in the instance table. Last
	but not least statistical values about the packets observed at the
	observation point, packets dropped during the metering process and
	the reports sent to the collectors are maintained.
	The psampSelectorListTable describes the concatenation of methods for
	a given Base Association. If concatenation of methods is not
	supported on the PSAMP device the table will hold exactly one entry
	per Base Association.
	The methods used for the metering process of an Base Association can
	be retrieved through the index given in the psampBaseAssocTable. The
	index of the Base Association table is also the first index in the
	psampSelectorListTable. So each method entry with the same (first)
	index as the Base Association is used to produce the data record for
	the reporting process. The second index is the running index for the
	method. The method itself is represented by a pointer (OID) to a
	parameter set. The methods are applied in the order given by this
	second index psampSelectorListIndex. Assume the following table:
	1.4.4.1.2.5.1 = 1 (second index)
	1.4.4.1.2.5.2 = 2 (second index)
	1.4.4.1.3.5.1 = 1.3.6.1.2.1.XXX.1.1.2.3.1.10
	(pointer to a parameter set psampSampTimeBasedParamSetTableEntry.10)
	1.4.4.1.3.5.2 = 1.3.6.1.2.1.XXX.1.1.1.3.1.4
	(pointer to a parameter set psampSampCountBasedParamSetTableEntry.4)
	1.4.4.1.4.5.1 = xxx (status of the row)
	1.4.4.1.4.5.2 = xxx (status of the row)
	This would mean that the method psampSampTimeBased with parameter set
	psampSampTimeBasedParamSetTableEntry.10 is applied prior to the
	method psampSampCountBased with parameter set
	psampSampCountBasedParamSetTableEntry.4 for the instance with index
	5.
	In addition every entry in the selector list table contains two
	statistical values: the packets observed at the entry point of the
	method and the packets dropped by the method.
	The psampTemplateRecordTable lists all data template records that are
	used by the PSAMP exporter. It has two indexes. The first one is
	the template record id and the second one is just a running index for
	the information element ids listed in the table. So the
	psampTemplateRecordEntry.4.x will list all information element ids
	used for template record id 4 in the order given by x.
	6. Definition		6. Definition
	PSAMP-MIB DEFINITIONS ::= BEGIN		PSAMP-MIB DEFINITIONS ::= BEGIN
	IMPORTS		IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, mib-2		MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, mib-2
	FROM SNMPv2-SMI -- RFC2578		FROM SNMPv2-SMI -- RFC2578
	TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue		TEXTUAL-CONVENTION, DateAndTime, DisplayString, RowStatus,
			TruthValue
	FROM SNMPv2-TC -- RFC2579		FROM SNMPv2-TC -- RFC2579
	MODULE-COMPLIANCE, OBJECT-GROUP		MODULE-COMPLIANCE, OBJECT-GROUP
	FROM SNMPv2-CONF -- RFC2580		FROM SNMPv2-CONF -- RFC2580
	InterfaceIndexOrZero		InterfaceIndexOrZero
	FROM IF-MIB -- RFC2863		FROM IF-MIB -- RFC2863
	InetAddressType, InetAddress, InetAutonomousSystemNumber		InetAddressType, InetAddress, InetAutonomousSystemNumber
	FROM INET-ADDRESS-MIB; -- RFC3291		FROM INET-ADDRESS-MIB -- RFC3291
			PsampMethodAvailability, ipfixMIB, ipfixGroupMetering,
			ipfixGroupReporting
			FROM IPFIX-EXPORTER-MIB;
	psampMIB MODULE-IDENTITY		psampMIB MODULE-IDENTITY
	LAST-UPDATED "200502181600Z" -- 18 February 2005		LAST-UPDATED "200606221200Z" -- 22 June 2006
	ORGANIZATION "IETF Packet Sampling Working Group"		ORGANIZATION "IETF Packet Sampling Working Group"
	CONTACT-INFO		CONTACT-INFO
	"WG charter:		"WG charter:
	http://www.ietf.org/html.charters/psamp-charter.html		http://www.ietf.org/html.charters/psamp-charter.html
	Mailing Lists:		Mailing Lists:
	General Discussion: psamp@ops.ietf.org		General Discussion: psamp@ops.ietf.org
	To Subscribe: psamp-request@ops.ietf.org		To Subscribe: psamp-request@ops.ietf.org
	In Body: subscribe		In Body: subscribe
	Archive: https://ops.ietf.org/lists/psamp/		Archive: https://ops.ietf.org/lists/psamp/
	skipping to change at page 14, line 43 ¶		skipping to change at page 10, line 48 ¶
	Editor:		Editor:
	Thomas Dietz		Thomas Dietz
	NEC Europe Ltd.		NEC Europe Ltd.
	Network Laboratories		Network Laboratories
	Kurfuersten-Anlage 36		Kurfuersten-Anlage 36
	69115 Heidelberg		69115 Heidelberg
	Germany		Germany
	Phone: +49 6221 90511-28		Phone: +49 6221 90511-28
	Email: dietz@netlab.nec.de"		Email: dietz@netlab.nec.de"
	DESCRIPTION		DESCRIPTION
	"The PSAMP MIB defines managed objects for packet sampling		"The PSAMP MIB defines managed objects for packet sampling.
	and filtering techniques for IP packet selection. These		These objects provide information about managed nodes
	objects provide information about managed nodes supporting		supporting packet sampling, including packet sampling
	packet sampling, including packet sampling capabilities,		capabilities, configuration and statistics.
	configuration and statistics. They also allow to configure
	packet sampling and filtering concerning the observation
	point at which packets are sampled, the packet selections
	methods used for sampling and filtering, and the collector
	to which packet samples are exported.
	Copyright (C) The Internet Society (2005). This version		Copyright (C) The Internet Society (2006). This version
	of this MIB module is part of RFC yyyy; see the RFC		of this MIB module is part of RFC yyyy; see the RFC
	itself for full legal notices."		itself for full legal notices."
	-- RFC Ed.: replace yyyy with actual RFC number & remove this notice		-- RFC Ed.: replace yyyy with actual RFC number & remove this notice
	-- Revision history		-- Revision history
	REVISION "200502181600Z" -- 18 February 2005		REVISION "200606221200Z" -- 22 June 2006
	DESCRIPTION		DESCRIPTION
	"Initial version, published as RFC yyyy."		"Initial version, published as RFC yyyy."
	-- RFC Ed.: replace yyyy with actual RFC number & remove this notice		-- RFC Ed.: replace yyyy with actual RFC number & remove this notice
	::= { mib-2 4937 }		::= { ipfixMIB 3 }
	-- XXX to be assigned by IANA.
	-- Textual Conventions
	PsampMethodAvailability ::= TEXTUAL-CONVENTION
	STATUS current
	DESCRIPTION
	"Used to report the availability of a packet selection
	method:
	available (1) - the method is available on the PSAMP
	device
	notAvailable (2) - the method is not available on the
	PSAMP device"
	SYNTAX INTEGER {
	available(1),
	notAvailable(2)
	}
	-- Top level structure of the MIB		-- Top level structure of the MIB
	psampObjects OBJECT IDENTIFIER ::= { psampMIB 1 }		psampObjects OBJECT IDENTIFIER ::= { psampMIB 1 }
	psampConformance OBJECT IDENTIFIER ::= { psampMIB 2 }		psampConformance OBJECT IDENTIFIER ::= { psampMIB 2 }
	--==================================================================		--==================================================================
	-- Packet selection sampling methods group of objects		-- Packet selection sampling methods group of objects
	--==================================================================		--==================================================================
	skipping to change at page 16, line 4 ¶		skipping to change at page 11, line 35 ¶
	-- Packet selection sampling methods group of objects		-- Packet selection sampling methods group of objects
	--==================================================================		--==================================================================
	psampSamplingMethods OBJECT IDENTIFIER ::= { psampObjects 1 }		psampSamplingMethods OBJECT IDENTIFIER ::= { psampObjects 1 }
	--==================================================================		--==================================================================
	--* Method 0: Selecting All Packets		--* Method 0: Selecting All Packets
	--==================================================================		--==================================================================
	psampSelectAll OBJECT IDENTIFIER ::= { psampSamplingMethods 0 }		psampSelectAll OBJECT IDENTIFIER ::= { psampSamplingMethods 0 }
	psampSelectAllAvail OBJECT-TYPE		psampSelectAllAvail OBJECT-TYPE
	SYNTAX PsampMethodAvailability		SYNTAX PsampMethodAvailability
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object indicates the availability of the trivial		"When retrieved, this object indicates the availability of
	method of selecting all packets."		the trivial method of selecting all packets."
	DEFVAL { notAvailable }		DEFVAL { available }
	::= { psampSelectAll 1 }		::= { psampSelectAll 1 }
	--==================================================================		--==================================================================
	--* Method 1: Systematic Count-based Sampling		--* Method 1: Systematic Count-based Sampling
	--==================================================================		--==================================================================
	psampSampCountBased OBJECT IDENTIFIER ::= { psampSamplingMethods 1 }		psampSampCountBased OBJECT IDENTIFIER ::= { psampSamplingMethods 1 }
	psampSampCountBasedAvail OBJECT-TYPE		psampSampCountBasedAvail OBJECT-TYPE
	SYNTAX PsampMethodAvailability		SYNTAX PsampMethodAvailability
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object indicates the availability of systematic		"When retrieved, this object indicates the availability of
	count-based sampling at the managed node."		systematic count-based sampling at the managed node."
	DEFVAL { notAvailable }		DEFVAL { notAvailable }
	::= { psampSampCountBased 1 }		::= { psampSampCountBased 1 }
	-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++		-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++
	psampSampCountBasedCap OBJECT IDENTIFIER		psampSampCountBasedCap OBJECT IDENTIFIER
	::= { psampSampCountBased 2 }		::= { psampSampCountBased 2 }
	psampSampCountBasedMaxInterval OBJECT-TYPE		psampSampCountBasedMaxInterval OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "number of packets"		UNITS "number of packets"
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object indicates the maximum number that can be		"When retrieved, this object indicates the maximum number
	specified for the sampling interval. Sampling means, that		that can be specified for the sampling interval."
	all packets that arrive in this interval are selected.
	The interval is given in number of packets."
	::= { psampSampCountBasedCap 1 }		::= { psampSampCountBasedCap 1 }
	psampSampCountBasedMinSpacing OBJECT-TYPE		psampSampCountBasedMaxSpacing OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "packets"		UNITS "number of packets"
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object indicates the minimum number that can be		"When retrieved, this object indicates the maximum number
	specified for the sampling spacing. The spacing parameter		that can be specified for the sampling spacing."
	defines the spacing number of packets between the end of
	one sampling interval and the start of the next
	succeeding interval."
	::= { psampSampCountBasedCap 2 }		::= { psampSampCountBasedCap 2 }
	-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++		-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++
	psampSampCountBasedParamSetTable OBJECT-TYPE		psampSampCountBasedParamSetTable OBJECT-TYPE
	SYNTAX SEQUENCE OF		SYNTAX SEQUENCE OF
	PsampSampCountBasedParamSetEntry		PsampSampCountBasedParamSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	skipping to change at page 17, line 48 ¶		skipping to change at page 13, line 27 ¶
	psampSampCountBasedInterval Unsigned32,		psampSampCountBasedInterval Unsigned32,
	psampSampCountBasedSpacing Unsigned32,		psampSampCountBasedSpacing Unsigned32,
	psampSampCountBasedRowStatus RowStatus		psampSampCountBasedRowStatus RowStatus
	}		}
	psampSampCountBasedIndex OBJECT-TYPE		psampSampCountBasedIndex OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)		SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The locally arbitrary, but unique identifier of an entry		"The index of this parameter set in the
	in this parameter set table.		psampSampCountBasedParamSetTable. It is used in entries of
			the psampInstanceTable as reference to this parameter set."
	The value is expected to remain constant at least from one
	re-initialization of the entity's network management system
	to the next re-initialization.
	It is used in entries of the psampSelectorListTable as
	reference to this method and its associated parameter set."
	::= { psampSampCountBasedParamSetEntry 1 }		::= { psampSampCountBasedParamSetEntry 1 }
	psampSampCountBasedInterval OBJECT-TYPE		psampSampCountBasedInterval OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "packets"		UNITS "number of packets"
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object specifies the sampling interval for systematic		"When retrieved, this object specifies the sampling interval
	count-based sampling. Sampling means, that all packets that		for systematic count-based sampling."
	arrive in this interval are selected. The interval is
	given in number of packets."
	REFERENCE		REFERENCE
	"PSAMP-SAMPLE-TECH, Section 5.1"		"PSAMP-SAMPLE-TECH, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampSampCountBasedParamSetEntry 2 }		::= { psampSampCountBasedParamSetEntry 2 }
	psampSampCountBasedSpacing OBJECT-TYPE		psampSampCountBasedSpacing OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "packets"		UNITS "number of packets"
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object specifies the sampling spacing for systematic		"When retrieved, this object specifies the sampling spacing
	count-based sampling. The spacing parameter defines the		for systematic count-based sampling."
	spacing number of packets between the end of one sampling
	interval and the start of the next succeeding interval."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampSampCountBasedParamSetEntry 3 }		::= { psampSampCountBasedParamSetEntry 3 }
	psampSampCountBasedRowStatus OBJECT-TYPE		psampSampCountBasedRowStatus OBJECT-TYPE
	SYNTAX RowStatus		SYNTAX RowStatus
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The status of this row of the table."		"The status of this row of the table."
	::= { psampSampCountBasedParamSetEntry 4 }		::= { psampSampCountBasedParamSetEntry 4 }
	skipping to change at page 19, line 4 ¶		skipping to change at page 14, line 21 ¶
	SYNTAX RowStatus		SYNTAX RowStatus
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The status of this row of the table."		"The status of this row of the table."
	::= { psampSampCountBasedParamSetEntry 4 }		::= { psampSampCountBasedParamSetEntry 4 }
	--==================================================================		--==================================================================
	--* Method 2: Systematic Time-based Sampling		--* Method 2: Systematic Time-based Sampling
	--==================================================================		--==================================================================
	psampSampTimeBased OBJECT IDENTIFIER ::= { psampSamplingMethods 2 }		psampSampTimeBased OBJECT IDENTIFIER ::= { psampSamplingMethods 2 }
	psampSampTimeBasedAvail OBJECT-TYPE		psampSampTimeBasedAvail OBJECT-TYPE
	SYNTAX PsampMethodAvailability		SYNTAX PsampMethodAvailability
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object indicates the availability of systematic		"When retrieved, this object indicates the availability of
	time-based sampling at the managed node."		systematic time-based sampling at the managed node."
	DEFVAL { notAvailable }		DEFVAL { notAvailable }
	::= { psampSampTimeBased 1 }		::= { psampSampTimeBased 1 }
	-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++		-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++
	psampSampTimeBasedCap OBJECT IDENTIFIER		psampSampTimeBasedCap OBJECT IDENTIFIER
	::= { psampSampTimeBased 2 }		::= { psampSampTimeBased 2 }
	psampSampTimeBasedMaxInterval OBJECT-TYPE		psampSampTimeBasedMaxInterval OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "micro-seconds"		UNITS "microseconds"
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object indicates the maximum number that can be		"When retrieved, this object indicates the maximum number
	specified for the sampling interval. Sampling means, that		that can be specified for the sampling interval."
	all packets that arrive in an interval are selected. The
	interval is given in micro-seconds."
	::= { psampSampTimeBasedCap 1 }		::= { psampSampTimeBasedCap 1 }
	psampSampTimeBasedMinSpacing OBJECT-TYPE		psampSampTimeBasedMaxSpacing OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "micro-seconds"		UNITS "microseconds"
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object indicates the minimum number that can be		"When retrieved, this object indicates the maximum number
	specified for the sampling spacing. The spacing parameter		that can be specified for the sampling spacing."
	defines the spacing in micro-seconds between the end of
	one sampling interval and the start of the next
	succeeding interval."
	::= { psampSampTimeBasedCap 2 }		::= { psampSampTimeBasedCap 2 }
	-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++		-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++
	psampSampTimeBasedParamSetTable OBJECT-TYPE		psampSampTimeBasedParamSetTable OBJECT-TYPE
	SYNTAX SEQUENCE OF		SYNTAX SEQUENCE OF
	PsampSampTimeBasedParamSetEntry		PsampSampTimeBasedParamSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	skipping to change at page 20, line 34 ¶		skipping to change at page 15, line 46 ¶
	psampSampTimeBasedInterval Unsigned32,		psampSampTimeBasedInterval Unsigned32,
	psampSampTimeBasedSpacing Unsigned32,		psampSampTimeBasedSpacing Unsigned32,
	psampSampTimeBasedRowStatus RowStatus		psampSampTimeBasedRowStatus RowStatus
	}		}
	psampSampTimeBasedIndex OBJECT-TYPE		psampSampTimeBasedIndex OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)		SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The locally arbitrary, but unique identifier of an entry		"The index of this parameter set in the
	in this parameter set table.		psampSampTimeBasedParameterSetTable. It is used in entries
			of the psampInstanceTable as reference to this parameter
	The value is expected to remain constant at least from one		set."
	re-initialization of the entity's network management system
	to the next re-initialization.
	It is used in entries of the psampSelectorListTable as
	reference to this method and its associated parameter set."
	::= { psampSampTimeBasedParamSetEntry 1 }		::= { psampSampTimeBasedParamSetEntry 1 }
	psampSampTimeBasedInterval OBJECT-TYPE		psampSampTimeBasedInterval OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "micro-seconds"		UNITS "microseconds"
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object specifies a sampling interval for systematic		"When retrieved, this object specifies a sampling interval
	time-based sampling. Sampling means, that all packets that		for systematic time-based sampling."
	arrive in this interval are selected. The interval is
	given in micro-seconds."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampSampTimeBasedParamSetEntry 2 }		::= { psampSampTimeBasedParamSetEntry 2 }
	psampSampTimeBasedSpacing OBJECT-TYPE		psampSampTimeBasedSpacing OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "micro-seconds"		UNITS "microseconds"
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object specifies a sampling spacing for systematic		"When retrieved, this object specifies a sampling spacing
	time-based sampling. The spacing parameter defines the		for systematic time-based sampling."
	spacing in micro-seconds between the end of one sampling
	interval and the start of the next succeeding interval."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampSampTimeBasedParamSetEntry 3 }		::= { psampSampTimeBasedParamSetEntry 3 }
	psampSampTimeBasedRowStatus OBJECT-TYPE		psampSampTimeBasedRowStatus OBJECT-TYPE
	SYNTAX RowStatus		SYNTAX RowStatus
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The status of this row of the table."		"The status of this row of the table."
	::= { psampSampTimeBasedParamSetEntry 4 }		::= { psampSampTimeBasedParamSetEntry 4 }
	skipping to change at page 21, line 46 ¶		skipping to change at page 16, line 50 ¶
	--* Method 3: Random n-out-of-N Sampling		--* Method 3: Random n-out-of-N Sampling
	--==================================================================		--==================================================================
	psampSampRandOutOfN OBJECT IDENTIFIER ::= { psampSamplingMethods 3 }		psampSampRandOutOfN OBJECT IDENTIFIER ::= { psampSamplingMethods 3 }
	psampSampRandOutOfNAvail OBJECT-TYPE		psampSampRandOutOfNAvail OBJECT-TYPE
	SYNTAX PsampMethodAvailability		SYNTAX PsampMethodAvailability
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object indicates the availability of random		"When retrieved, this object indicates the availability of
	n-out-of-N sampling at the managed node."		random n-out-of-N sampling at the managed node."
	DEFVAL { notAvailable }		DEFVAL { notAvailable }
	::= { psampSampRandOutOfN 1 }		::= { psampSampRandOutOfN 1 }
	-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++		-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++
	psampSampRandOutOfNCap OBJECT IDENTIFIER		psampSampRandOutOfNCap OBJECT IDENTIFIER
	::= { psampSampRandOutOfN 2 }		::= { psampSampRandOutOfN 2 }
	psampSampRandOutOfNMaxPopulation OBJECT-TYPE		psampSampRandOutOfNMaxPopulation OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "packets"		UNITS "number of packets"
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object indicates the maximum number of packets that		"When retrieved, this object indicates the maximum number
	can be specified for the population size."		that can be specified for the population size."
	::= { psampSampRandOutOfNCap 1 }		::= { psampSampRandOutOfNCap 1 }
			psampSampRandOutOfNMaxSample OBJECT-TYPE
			SYNTAX Unsigned32
			UNITS "number of packets"
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
			"When retrieved, this object indicates the maximum number
			that can be specified for the sampling size."
			::= { psampSampRandOutOfNCap 2 }
	-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++		-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++
	psampSampRandOutOfNParamSetTable OBJECT-TYPE		psampSampRandOutOfNParamSetTable OBJECT-TYPE
	SYNTAX SEQUENCE OF		SYNTAX SEQUENCE OF
	PsampSampRandOutOfNParamSetEntry		PsampSampRandOutOfNParamSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This table lists configurations of random n-out-of-N		"This table lists configurations of random n-out-of-N
	sampling. A parameter set describing a configuration		sampling. A parameter set describing a configuration
	contains a two parameters: the population size and the		contains a single parameter only: the sampling rate."
	sample size."
	::= { psampSampRandOutOfN 3 }		::= { psampSampRandOutOfN 3 }
	psampSampRandOutOfNParamSetEntry OBJECT-TYPE		psampSampRandOutOfNParamSetEntry OBJECT-TYPE
	SYNTAX PsampSampRandOutOfNParamSetEntry		SYNTAX PsampSampRandOutOfNParamSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"Defines an entry in the psampSampRandOutOfNParamSetTable."		"Defines an entry in the psampSampRandOutOfNParamSetTable."
	INDEX { psampSampRandOutOfNIndex }		INDEX { psampSampRandOutOfNIndex }
	::= { psampSampRandOutOfNParamSetTable 1 }		::= { psampSampRandOutOfNParamSetTable 1 }
	skipping to change at page 23, line 5 ¶		skipping to change at page 18, line 18 ¶
	psampSampRandOutOfNPopulation Unsigned32,		psampSampRandOutOfNPopulation Unsigned32,
	psampSampRandOutOfNSample Unsigned32,		psampSampRandOutOfNSample Unsigned32,
	psampSampRandOutOfNRowStatus RowStatus		psampSampRandOutOfNRowStatus RowStatus
	}		}
	psampSampRandOutOfNIndex OBJECT-TYPE		psampSampRandOutOfNIndex OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)		SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The locally arbitrary, but unique identifier of an entry		"The index of this parameter set in the
	in this parameter set table.		psampSampRandOutOfNParamSetTable. It is used in entries of
			the psampInstanceTable as reference to this parameter set."
	The value is expected to remain constant at least from one
	re-initialization of the entity's network management system
	to the next re-initialization.
	It is used in entries of the psampSelectorListTable as
	reference to this method and its associated parameter set."
	::= { psampSampRandOutOfNParamSetEntry 1 }		::= { psampSampRandOutOfNParamSetEntry 1 }
	psampSampRandOutOfNPopulation OBJECT-TYPE		psampSampRandOutOfNPopulation OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "packets"		UNITS "packets"
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object specifies the number of packets in the parent		"When retrieved, this object specifies the number of elements
	population of the sampling algorithm."		in the parent population of the sampling algorithm."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampSampRandOutOfNParamSetEntry 2 }		::= { psampSampRandOutOfNParamSetEntry 2 }
	psampSampRandOutOfNSample OBJECT-TYPE		psampSampRandOutOfNSample OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "packets"		UNITS "packets"
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object specifies the number of packets that are		"When retrieved, this object specifies the number of
	sampled from the parent population of the sampling		elements that are sampled from the parent population of the
	algorithm."		sampling algorithm."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampSampRandOutOfNParamSetEntry 3 }		::= { psampSampRandOutOfNParamSetEntry 3 }
	psampSampRandOutOfNRowStatus OBJECT-TYPE		psampSampRandOutOfNRowStatus OBJECT-TYPE
	SYNTAX RowStatus		SYNTAX RowStatus
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The status of this row of the table."		"The status of this row of the table."
	::= { psampSampRandOutOfNParamSetEntry 4 }		::= { psampSampRandOutOfNParamSetEntry 4 }
	skipping to change at page 24, line 14 ¶		skipping to change at page 19, line 20 ¶
	--* Method 4: Uniform Probabilistic Sampling		--* Method 4: Uniform Probabilistic Sampling
	--==================================================================		--==================================================================
	psampSampUniProb OBJECT IDENTIFIER ::= { psampSamplingMethods 4 }		psampSampUniProb OBJECT IDENTIFIER ::= { psampSamplingMethods 4 }
	psampSampUniProbAvail OBJECT-TYPE		psampSampUniProbAvail OBJECT-TYPE
	SYNTAX PsampMethodAvailability		SYNTAX PsampMethodAvailability
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object indicates the availability of uniform		"When retrieved, this object indicates the availability of
	probabilistic sampling at the managed node."		random uniform probabilistic sampling at the managed node."
	DEFVAL { notAvailable }		DEFVAL { notAvailable }
	::= { psampSampUniProb 1 }		::= { psampSampUniProb 1 }
	psampSampUniProbCap OBJECT IDENTIFIER		psampSampUniProbCap OBJECT IDENTIFIER
	::= { psampSampUniProb 2 }		::= { psampSampUniProb 2 }
	-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++		-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++
	-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++		-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++
	psampSampUniProbParamSetTable OBJECT-TYPE		psampSampUniProbParamSetTable OBJECT-TYPE
	SYNTAX SEQUENCE OF		SYNTAX SEQUENCE OF
	PsampSampUniProbParamSetEntry		PsampSampUniProbParamSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This table lists configurations of uniform probabilistic		"This table lists configurations of random probabilistic
	sampling. A parameter set describing a configuration		sampling. A parameter set describing a configuration
	contains a single parameter only: the sampling		contains a single parameter only: the sampling rate."
	probability."
	::= { psampSampUniProb 3 }		::= { psampSampUniProb 3 }
	psampSampUniProbParamSetEntry OBJECT-TYPE		psampSampUniProbParamSetEntry OBJECT-TYPE
	SYNTAX PsampSampUniProbParamSetEntry		SYNTAX PsampSampUniProbParamSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"Defines an entry in the psampSampUniProbParamSetTable."		"Defines an entry in the psampSampUniProbParamSetTable."
	INDEX { psampSampUniProbIndex }		INDEX { psampSampUniProbIndex }
	::= { psampSampUniProbParamSetTable 1 }		::= { psampSampUniProbParamSetTable 1 }
	skipping to change at page 25, line 4 ¶		skipping to change at page 20, line 10 ¶
	DESCRIPTION		DESCRIPTION
	"Defines an entry in the psampSampUniProbParamSetTable."		"Defines an entry in the psampSampUniProbParamSetTable."
	INDEX { psampSampUniProbIndex }		INDEX { psampSampUniProbIndex }
	::= { psampSampUniProbParamSetTable 1 }		::= { psampSampUniProbParamSetTable 1 }
	PsampSampUniProbParamSetEntry ::=		PsampSampUniProbParamSetEntry ::=
	SEQUENCE {		SEQUENCE {
	psampSampUniProbIndex Integer32,		psampSampUniProbIndex Integer32,
	psampSampUniProbProbability Unsigned32,		psampSampUniProbProbability Unsigned32,
	psampSampUniProbRowStatus RowStatus		psampSampUniProbRowStatus RowStatus
	}		}
	psampSampUniProbIndex OBJECT-TYPE		psampSampUniProbIndex OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)		SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The locally arbitrary, but unique identifier of an entry		"The index of this parameter set in the
	in this parameter set table.		psampSampUniProbParameterSetTable. It is used in entries of
			the psampInstanceTable as reference to this parameter set."
	The value is expected to remain constant at least from one
	re-initialization of the entity's network management system
	to the next re-initialization.
	It is used in entries of the psampSelectorListTable as
	reference to this method and its associated parameter set."
	::= { psampSampUniProbParamSetEntry 1 }		::= { psampSampUniProbParamSetEntry 1 }
	psampSampUniProbProbability OBJECT-TYPE		psampSampUniProbProbability OBJECT-TYPE
	SYNTAX Unsigned32 (0..4294967295)		SYNTAX Unsigned32 (0..4294967295)
			UNITS "packets"
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object gives the probability that a packet is sampled.		"When retrieved, this object specifies the number of
	The probability is equal for every packet. The given value		elements in the parent population of the sampling
	must be divided by 4294967295 (=2^32-1), so a value of 0		algorithm."
	means no packet is sampled (probability is 0) and a value of
	4294967295 means every packet is sampled (probability is
	1)."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampSampUniProbParamSetEntry 2 }		::= { psampSampUniProbParamSetEntry 2 }
	psampSampUniProbRowStatus OBJECT-TYPE		psampSampUniProbRowStatus OBJECT-TYPE
	SYNTAX RowStatus		SYNTAX RowStatus
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The status of this row of the table."		"The status of this row of the table."
	::= { psampSampUniProbParamSetEntry 3 }		::= { psampSampUniProbParamSetEntry 3 }
	skipping to change at page 26, line 4 ¶		skipping to change at page 20, line 49 ¶
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The status of this row of the table."		"The status of this row of the table."
	::= { psampSampUniProbParamSetEntry 3 }		::= { psampSampUniProbParamSetEntry 3 }
	--==================================================================		--==================================================================
	--* Method 5: Non-Uniform Probabilistic Sampling		--* Method 5: Non-Uniform Probabilistic Sampling
	--==================================================================		--==================================================================
	psampSampNonUniProb OBJECT IDENTIFIER ::= { psampSamplingMethods 5 }		psampSampNonUniProb OBJECT IDENTIFIER ::= { psampSamplingMethods 5 }
	psampSampNonUniProbAvail OBJECT-TYPE		psampSampNonUniProbAvail OBJECT-TYPE
	SYNTAX PsampMethodAvailability		SYNTAX PsampMethodAvailability
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object indicates the availability of non-uniform		"When retrieved, this object indicates the availability of
	probabilistic sampling at the managed node."		random non-uniform probabilistic sampling at the managed
			node."
	DEFVAL { notAvailable }		DEFVAL { notAvailable }
	::= { psampSampNonUniProb 1 }		::= { psampSampNonUniProb 1 }
	-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++		-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++
	-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++		-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++
	psampSampNonUniProbParamSetTable OBJECT-TYPE		psampSampNonUniProbParamSetTable OBJECT-TYPE
	SYNTAX SEQUENCE OF		SYNTAX SEQUENCE OF
	PsampSampNonUniProbParamSetEntry		PsampSampNonUniProbParamSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This table lists configurations of non-uniform		"This table lists configurations of random probabilistic
	probabilistic sampling. A parameter set describing a		sampling. A parameter set describing a configuration
	configuration contains two parameter: a pointer to a		contains a single parameter only: the sampling rate."
	probability function and a pointer to an associated
	parameter set."
	::= { psampSampNonUniProb 3 }		::= { psampSampNonUniProb 3 }
	psampSampNonUniProbParamSetEntry OBJECT-TYPE		psampSampNonUniProbParamSetEntry OBJECT-TYPE
	SYNTAX PsampSampNonUniProbParamSetEntry		SYNTAX PsampSampNonUniProbParamSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"Defines an entry in the psampSampNonUniProbParamSetTable."		"Defines an entry in the psampSampNonUniProbParamSetTable."
	INDEX { psampSampNonUniProbIndex }		INDEX { psampSampNonUniProbIndex }
	::= { psampSampNonUniProbParamSetTable 1 }		::= { psampSampNonUniProbParamSetTable 1 }
	skipping to change at page 27, line 5 ¶		skipping to change at page 21, line 49 ¶
	psampSampNonUniProbFunction OBJECT IDENTIFIER,		psampSampNonUniProbFunction OBJECT IDENTIFIER,
	psampSampNonUniProbFuncParam OBJECT IDENTIFIER,		psampSampNonUniProbFuncParam OBJECT IDENTIFIER,
	psampSampNonUniProbRowStatus RowStatus		psampSampNonUniProbRowStatus RowStatus
	}		}
	psampSampNonUniProbIndex OBJECT-TYPE		psampSampNonUniProbIndex OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)		SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The locally arbitrary, but unique identifier of an entry		"The index of this parameter set in the
	in this parameter set table.		psampSampNonUniProbParameterSetTable. It is used in entries
			of the psampInstanceTable as reference to this parameter
	The value is expected to remain constant at least from one		set."
	re-initialization of the entity's network management system
	to the next re-initialization.
	It is used in entries of the psampSelectorListTable as
	reference to this method and its associated parameter set."
	::= { psampSampNonUniProbParamSetEntry 1 }		::= { psampSampNonUniProbParamSetEntry 1 }
	psampSampNonUniProbFunction OBJECT-TYPE		psampSampNonUniProbFunction OBJECT-TYPE
	SYNTAX OBJECT IDENTIFIER		SYNTAX OBJECT IDENTIFIER
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object specifies the function that is used to compute		"When retrieved, this object specifies the function that is
	the probability for sampling."		used to compute the probability for sampling."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampSampNonUniProbParamSetEntry 2 }		::= { psampSampNonUniProbParamSetEntry 2 }
	psampSampNonUniProbFuncParam OBJECT-TYPE		psampSampNonUniProbFuncParam OBJECT-TYPE
	SYNTAX OBJECT IDENTIFIER		SYNTAX OBJECT IDENTIFIER
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object specifies the parameters set for the function		"When retrieved, this object specifies the parameter set for
	specified with psampSampNonUniProbFunction that is used to		the function specified with psampSampNonUniProbFunction
	compute the probability for sampling."		that is used to compute the probability for sampling."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampSampNonUniProbParamSetEntry 3 }		::= { psampSampNonUniProbParamSetEntry 3 }
	psampSampNonUniProbRowStatus OBJECT-TYPE		psampSampNonUniProbRowStatus OBJECT-TYPE
	SYNTAX RowStatus		SYNTAX RowStatus
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The status of this row of the table."		"The status of this row of the table."
	::= { psampSampNonUniProbParamSetEntry 4 }		::= { psampSampNonUniProbParamSetEntry 4 }
	skipping to change at page 28, line 4 ¶		skipping to change at page 22, line 43 ¶
	SYNTAX RowStatus		SYNTAX RowStatus
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The status of this row of the table."		"The status of this row of the table."
	::= { psampSampNonUniProbParamSetEntry 4 }		::= { psampSampNonUniProbParamSetEntry 4 }
	--==================================================================		--==================================================================
	--* Method 6: Flow State Sampling		--* Method 6: Flow State Sampling
	--==================================================================		--==================================================================
	psampSampFlowState OBJECT IDENTIFIER ::= { psampSamplingMethods 6 }		psampSampFlowState OBJECT IDENTIFIER ::= { psampSamplingMethods 6 }
	psampSampFlowStateAvail OBJECT-TYPE		psampSampFlowStateAvail OBJECT-TYPE
	SYNTAX PsampMethodAvailability		SYNTAX PsampMethodAvailability
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object indicates the availability of flow state		"When retrieved, this object indicates the availability of
	sampling at the managed node."		flow state sampling at the managed node."
	DEFVAL { notAvailable }		DEFVAL { notAvailable }
	::= { psampSampFlowState 1 }		::= { psampSampFlowState 1 }
	-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++		-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++
	-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++		-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++
	psampSampFlowStateParamSetTable OBJECT-TYPE		psampSampFlowStateParamSetTable OBJECT-TYPE
	SYNTAX SEQUENCE OF		SYNTAX SEQUENCE OF
	PsampSampFlowStateParamSetEntry		PsampSampFlowStateParamSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This table lists configurations of flow state sampling. A		"This table lists configurations of random probabilistic
	parameter set describing a configuration contains two		sampling. A parameter set describing a configuration
	parameter: a pointer to a flow state function and a pointer		contains a single parameter only: the sampling rate."
	to an associated parameter set."
	::= { psampSampFlowState 3 }		::= { psampSampFlowState 3 }
	psampSampFlowStateParamSetEntry OBJECT-TYPE		psampSampFlowStateParamSetEntry OBJECT-TYPE
	SYNTAX PsampSampFlowStateParamSetEntry		SYNTAX PsampSampFlowStateParamSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"Defines an entry in the psampSampFlowStateParamSetTable."		"Defines an entry in the psampSampFlowStateParamSetTable."
	INDEX { psampSampFlowStateIndex }		INDEX { psampSampFlowStateIndex }
	::= { psampSampFlowStateParamSetTable 1 }		::= { psampSampFlowStateParamSetTable 1 }
	skipping to change at page 29, line 6 ¶		skipping to change at page 23, line 45 ¶
	psampSampFlowStateFunction OBJECT IDENTIFIER,		psampSampFlowStateFunction OBJECT IDENTIFIER,
	psampSampFlowStateFuncParam OBJECT IDENTIFIER,		psampSampFlowStateFuncParam OBJECT IDENTIFIER,
	psampSampFlowStateRowStatus RowStatus		psampSampFlowStateRowStatus RowStatus
	}		}
	psampSampFlowStateIndex OBJECT-TYPE		psampSampFlowStateIndex OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)		SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The locally arbitrary, but unique identifier of an entry		"The index of this parameter set in the
	in this parameter set table.		psampSampFlowStateParameterSetTable. It is used in entries
			of the psampInstanceTable as reference to this parameter
	The value is expected to remain constant at least from one		set."
	re-initialization of the entity's network management system
	to the next re-initialization.
	It is used in entries of the psampSelectorListTable as
	reference to this method and its associated parameter set."
	::= { psampSampFlowStateParamSetEntry 1 }		::= { psampSampFlowStateParamSetEntry 1 }
	psampSampFlowStateFunction OBJECT-TYPE		psampSampFlowStateFunction OBJECT-TYPE
	SYNTAX OBJECT IDENTIFIER		SYNTAX OBJECT IDENTIFIER
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object specifies the function that is used to check		"When retrieved, this object specifies the function that is
	the flow state for sampling."		used to check the flow state for sampling."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampSampFlowStateParamSetEntry 2 }		::= { psampSampFlowStateParamSetEntry 2 }
	psampSampFlowStateFuncParam OBJECT-TYPE		psampSampFlowStateFuncParam OBJECT-TYPE
	SYNTAX OBJECT IDENTIFIER		SYNTAX OBJECT IDENTIFIER
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object specifies the parameter set for the function		"When retrieved, this object specifies the parameter set for
	specified with psampSampFlowStateFunction that is used to		the function specified with psampSampFlowStateFunction that
	determine the packet that is to be sampled."		is used to determine the packet that is to be sampled."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampSampFlowStateParamSetEntry 3 }		::= { psampSampFlowStateParamSetEntry 3 }
	psampSampFlowStateRowStatus OBJECT-TYPE		psampSampFlowStateRowStatus OBJECT-TYPE
	SYNTAX RowStatus		SYNTAX RowStatus
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The status of this row of the table."		"The status of this row of the table."
	::= { psampSampFlowStateParamSetEntry 4 }		::= { psampSampFlowStateParamSetEntry 4 }
	skipping to change at page 30, line 19 ¶		skipping to change at page 25, line 5 ¶
	--* Method 0: Match filtering		--* Method 0: Match filtering
	--==================================================================		--==================================================================
	psampFilterMatch OBJECT IDENTIFIER ::= { psampFilteringMethods 0 }		psampFilterMatch OBJECT IDENTIFIER ::= { psampFilteringMethods 0 }
	psampFilterMatchAvail OBJECT-TYPE		psampFilterMatchAvail OBJECT-TYPE
	SYNTAX PsampMethodAvailability		SYNTAX PsampMethodAvailability
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object indicates the availability of match filtering		"When retrieved, this object indicates the availability of
	at the managed node."		match filtering at the managed node."
	DEFVAL { notAvailable }		DEFVAL { notAvailable }
	::= { psampFilterMatch 1 }		::= { psampFilterMatch 1 }
	-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++		-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++
	-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++		-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++
	psampFilterMatchParamSetTable OBJECT-TYPE		psampFilterMatchParamSetTable OBJECT-TYPE
	SYNTAX SEQUENCE OF		SYNTAX SEQUENCE OF
	PsampFilterMatchParamSetEntry		PsampFilterMatchParamSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This table lists configurations of match filtering. The		"This table lists configurations of match filtering. The
	match filtering is based on the IPFIX/PSAMP Information		match filtering is based on the IPFIX/PSAMP Information
	Elements. The parameter set contains the Information		Elements. The parameter set contains the Field Id, a value
	Element Id, a value or value range and a mask."		or value range and a mask."
	::= { psampFilterMatch 3 }		::= { psampFilterMatch 3 }
	psampFilterMatchParamSetEntry OBJECT-TYPE		psampFilterMatchParamSetEntry OBJECT-TYPE
	SYNTAX PsampFilterMatchParamSetEntry		SYNTAX PsampFilterMatchParamSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"Defines an entry in the psampFilterMatchParamSetTable."		"Defines an entry in the psampFilterMatchParamSetTable."
	INDEX { psampFilterMatchIndex }		INDEX { psampFilterMatchIndex }
	::= { psampFilterMatchParamSetTable 1 }		::= { psampFilterMatchParamSetTable 1 }
	PsampFilterMatchParamSetEntry ::=		PsampFilterMatchParamSetEntry ::=
	SEQUENCE {		SEQUENCE {
	psampFilterMatchIndex Integer32,		psampFilterMatchIndex Integer32,
	psampFilterMatchInfoElementId Integer32,		psampFilterMatchFieldId Integer32,
	psampFilterMatchStartValue OCTET STRING,		psampFilterMatchStartValue OCTET STRING,
	psampFilterMatchEndValue OCTET STRING,		psampFilterMatchStopValue OCTET STRING,
	psampFilterMatchMask OCTET STRING,		psampFilterMatchMask OCTET STRING,
	psampFilterMatchRowStatus RowStatus		psampFilterMatchRowStatus RowStatus
	}		}
	psampFilterMatchIndex OBJECT-TYPE		psampFilterMatchIndex OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)		SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The locally arbitrary, but unique identifier of an entry		"The index of this parameter set in the
	in this parameter set table.		psampFilterMatchParameterSetTable. It is used in entries of
			the psampInstanceTable as reference to this parameter set."
	The value is expected to remain constant at least from one
	re-initialization of the entity's network management system
	to the next re-initialization.
	It is used in entries of the psampSelectorListTable as
	reference to this method and its associated parameter set."
	::= { psampFilterMatchParamSetEntry 1 }		::= { psampFilterMatchParamSetEntry 1 }
	psampFilterMatchInfoElementId OBJECT-TYPE		psampFilterMatchFieldId OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)		SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The id of the information element that is encoded as the		"The id of the field that is encoded as the FieldId defined
	InfoElementId defined in the IPFIX/PSAMP Information		in the IPFIX/PSAMP Information Models."
	Models."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1, ipfix and		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1, ipfix and
	psamp info model!!"		psamp info model!!"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampFilterMatchParamSetEntry 2 }		::= { psampFilterMatchParamSetEntry 2 }
	psampFilterMatchStartValue OBJECT-TYPE		psampFilterMatchStartValue OBJECT-TYPE
	SYNTAX OCTET STRING		SYNTAX OCTET STRING
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The value of the information element or the start of the		"The value of the field or the start of the value range if
	value range. If psampFilterMatchEndValue is defined then		psampFilterMatchStopValue is not equal to this value. The
	this value is the start value of a value range. If		data type and its encoding is the same as in PSAMP-PROTO."
	psampFilterMatchMask is defined then
	psampFilterMatchEndValue is ignored. In this case the
	packet is selected if the masked value exactly matches the
	start value psampFilterMatchStartValue. The data type and
	its encoding is the same as in PSAMP-PROTO."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1, PROTO!!"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1, PROTO!!"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampFilterMatchParamSetEntry 3 }		::= { psampFilterMatchParamSetEntry 3 }
	psampFilterMatchEndValue OBJECT-TYPE		psampFilterMatchStopValue OBJECT-TYPE
	SYNTAX OCTET STRING		SYNTAX OCTET STRING
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The final value of a value range. It should be equal to		"The final value of a value range. It should be equal to
	it's default value (''H) if a single value should be		psampFilterMatchStartValue if a single value should be
	encoded. It is ignored if psampFilterMatchMask is defined.		encoded. The data type and its encoding is the same as in
	The data type and its encoding is the same as in		PSAMP-PROTO."
	PSAMP-PROTO."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1, PROTO!!"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1, PROTO!!"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	DEFVAL { ''H }
	::= { psampFilterMatchParamSetEntry 4 }		::= { psampFilterMatchParamSetEntry 4 }
	psampFilterMatchMask OBJECT-TYPE		psampFilterMatchMask OBJECT-TYPE
	SYNTAX OCTET STRING		SYNTAX OCTET STRING
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The selected value of the given information element is		"The value of the field is a mask like the netmask for IP
	masked with this value. The resulting value is compared to		addresses if this is applicable for the given field Id
	psampFilterMatchStartValue and the packet is selected if		psampFilterMatchFieldId or empty if not. The data type and
	they match. If psampFilterMatchEndValue and		its encoding is the same as in PSAMP-PROTO."
	psampFilterMatchMask are defined at the same time
	psampFilterMatchEndValue is ignored. Note that a mask does
	not make sense for all information elements and if it is
	specified the mask has the same data type and encoding as
	the information element referenced by the
	psampFilterMatchInfoElementId."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1, PROTO!!"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1, PROTO!!"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	DEFVAL { ''H }		DEFVAL { ''H }
	::= { psampFilterMatchParamSetEntry 5 }		::= { psampFilterMatchParamSetEntry 5 }
	psampFilterMatchRowStatus OBJECT-TYPE		psampFilterMatchRowStatus OBJECT-TYPE
	SYNTAX RowStatus		SYNTAX RowStatus
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The status of this row of the table."		"The status of this row of the table."
	skipping to change at page 33, line 19 ¶		skipping to change at page 27, line 33 ¶
	--* Method 1: Hash filtering		--* Method 1: Hash filtering
	--==================================================================		--==================================================================
	psampFilterHash OBJECT IDENTIFIER ::= { psampFilteringMethods 1 }		psampFilterHash OBJECT IDENTIFIER ::= { psampFilteringMethods 1 }
	psampFilterHashAvail OBJECT-TYPE		psampFilterHashAvail OBJECT-TYPE
	SYNTAX PsampMethodAvailability		SYNTAX PsampMethodAvailability
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object indicates the availability of hash filtering		"When retrieved, this object indicates the availability of
	at the managed node."		hash filtering at the managed node."
	DEFVAL { notAvailable }		DEFVAL { notAvailable }
	::= { psampFilterHash 1 }		::= { psampFilterHash 1 }
	psampFilterHashCapabilities OBJECT IDENTIFIER		psampFilterHashCapabilities OBJECT IDENTIFIER
	::= { psampFilterHash 2 }		::= { psampFilterHash 2 }
	-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++		-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++
	-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++		-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++
	skipping to change at page 34, line 26 ¶		skipping to change at page 28, line 39 ¶
	psampFilterHashOutputMask OCTET STRING,		psampFilterHashOutputMask OCTET STRING,
	psampFilterHashSelection DisplayString,		psampFilterHashSelection DisplayString,
	psampFilterHashRowStatus RowStatus		psampFilterHashRowStatus RowStatus
	}		}
	psampFilterHashIndex OBJECT-TYPE		psampFilterHashIndex OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)		SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The locally arbitrary, but unique identifier of an entry		"The index of this parameter set in the
	in this parameter set table.		psampFilterHashParamSetTable. It is used in entries of the
			psampInstanceTable as reference to this parameter set."
	The value is expected to remain constant at least from one
	re-initialization of the entity's network management system
	to the next re-initialization.
	It is used in entries of the psampSelectorListTable as
	reference to this method and its associated parameter set."
	::= { psampFilterHashParamSetEntry 1 }		::= { psampFilterHashParamSetEntry 1 }
	psampFilterHashAddrType OBJECT-TYPE		psampFilterHashAddrType OBJECT-TYPE
	SYNTAX InetAddressType		SYNTAX InetAddressType
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The address type the hash function is applied to (either		"The address type the hash function is applied to (either
	IPv4 or IPv6 packets). If a hash function applies to both		IPv4 or IPv6 packets)."
	IPv4 and IPv6 addresses two entries in this table are
	needed."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampFilterHashParamSetEntry 2 }		::= { psampFilterHashParamSetEntry 2 }
	psampFilterHashHeaderBits OBJECT-TYPE		psampFilterHashHeaderBits OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE (40))		SYNTAX OCTET STRING (SIZE (40))
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The object specifies the header bits of the layer 3 header		"The object specifies the header bits used for hashing. The
	used for hashing. The size is 40 bytes but when		size is 40 bytes but when psampFilterHashAddrType is IPv4
	psampFilterHashAddrType is IPv4 then only the first 20		then only the first 20 bytes are used."
	bytes are used."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampFilterHashParamSetEntry 3 }		::= { psampFilterHashParamSetEntry 3 }
	psampFilterHashPayloadBytes OBJECT-TYPE		psampFilterHashPayloadBytes OBJECT-TYPE
	SYNTAX Integer32 (0..2147483647)		SYNTAX Integer32 (0..2147483647)
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The number of bytes of payload used as input to the hash		"The number of bytes of payload used as input to the hash
	function."		function."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampFilterHashParamSetEntry 4 }		::= { psampFilterHashParamSetEntry 4 }
	psampFilterHashPayloadBits OBJECT-TYPE		psampFilterHashPayloadBits OBJECT-TYPE
	SYNTAX OCTET STRING		SYNTAX OCTET STRING
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The object specifies the payload bits used for hashing. The		"The object specifies the payload bits used for hashing. The
	size depends on the value of psampFilterHashPayloadBytes."		size depends on the value of psampFilterHashPayloadBytes."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampFilterHashParamSetEntry 5 }		::= { psampFilterHashParamSetEntry 5 }
	psampFilterHashFunction OBJECT-TYPE		psampFilterHashFunction OBJECT-TYPE
	SYNTAX OBJECT IDENTIFIER		SYNTAX OBJECT IDENTIFIER
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object specifies the hash function executed by the		"When retrieved, this object specifies the the hash function
	current filtering method."		executed by the current filtering method."
	::= { psampFilterHashParamSetEntry 6 }		::= { psampFilterHashParamSetEntry 6 }
	psampFilterHashFuncParam OBJECT-TYPE		psampFilterHashFuncParam OBJECT-TYPE
	SYNTAX OBJECT IDENTIFIER		SYNTAX OBJECT IDENTIFIER
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object specifies the parameters used in addition to		"When retrieved, this object specifies the the paramters
	those specified in this table."		used in addition to those specified in this table."
	::= { psampFilterHashParamSetEntry 7 }		::= { psampFilterHashParamSetEntry 7 }
	psampFilterHashInputBits OBJECT-TYPE		psampFilterHashInputBits OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)		SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The number of bits used as input key to the hash function.		"The number of bits used as input key to the hash function.
	Usually this should be in the form of 2^x."		Usually this should be in the form of 2^x."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampFilterHashParamSetEntry 8 }		::= { psampFilterHashParamSetEntry 8 }
	psampFilterHashOutputBits OBJECT-TYPE		psampFilterHashOutputBits OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)		SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The number of bits that form the output value of the hash		"The number of bits that form the output value of the hash
	function."		function. Usually this should be in the form of 2^x."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampFilterHashParamSetEntry 9 }		::= { psampFilterHashParamSetEntry 9 }
	psampFilterHashOutputMask OBJECT-TYPE		psampFilterHashOutputMask OBJECT-TYPE
	SYNTAX OCTET STRING		SYNTAX OCTET STRING
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The mask applied to the output bits of the hash function.		"The mask applied to the output bits of the hash function.
	If less hash values are needed the number of hashes can be		If less hash values are needed the number of hashes can be
	reduced by masking the output value. The size is dependent		reduced by masking the output value. The size is dependent
	on the number of output bits. If the output mask is empty		on the number of output bits. If the output mask is empty
	then no mask is applied."		then no mask is applied."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	DEFVAL { ''H }		DEFVAL { ''H }
	::= { psampFilterHashParamSetEntry 10 }		::= { psampFilterHashParamSetEntry 10 }
	psampFilterHashSelection OBJECT-TYPE		psampFilterHashSelection OBJECT-TYPE
	SYNTAX DisplayString		SYNTAX DisplayString
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object represents the hash values that select a		"This object represents the hash values that select a
	packet. It is represented in a human readable form. The		packet. It is represented in a human readable form. The
	only allowed characters are [0-9a-f,-x]. A single hash		only allowed characters are [0-9a-f,-x]. A single hash
	value is represented by its decimal ASCII notation or if		value is represented by its decimal ASCII notation or if
	prefixed with 0x by its hexadecimal ASCII notation. A range		prefixed with 0x by its hexadecimal ASCII notation. A range
	can be given by hash_value - hash_value and several single		can be given by hash_value - hash_value and several single
	values or ranges are separated by , (comma). The ASCII		values or ranges are separated by , (comma). So, if you
	string is defined as follows:		with to select hash values 0, 5 - 10 and 250-255 you could
			specify: 0,5-10,0xfa-0xff"
	selections := selection | selections,selection
	selection := range | value
	range := value-value
	value := 0x[0-9,a-f]* | [1-9][0-9]*
	So, if you with to select hash values 0, 5 - 10 and 250-255
	you could specify: 0,5-10,0xfa-0xff"
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampFilterHashParamSetEntry 11 }		::= { psampFilterHashParamSetEntry 11 }
	psampFilterHashRowStatus OBJECT-TYPE		psampFilterHashRowStatus OBJECT-TYPE
	SYNTAX RowStatus		SYNTAX RowStatus
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The status of this row of the table."		"The status of this row of the table."
	::= { psampFilterHashParamSetEntry 12 }		::= { psampFilterHashParamSetEntry 12 }
	skipping to change at page 37, line 47 ¶		skipping to change at page 31, line 45 ¶
	--* Method 2: Router State filtering		--* Method 2: Router State filtering
	--==================================================================		--==================================================================
	psampFilterRState OBJECT IDENTIFIER ::= { psampFilteringMethods 2 }		psampFilterRState OBJECT IDENTIFIER ::= { psampFilteringMethods 2 }
	psampFilterRStateAvail OBJECT-TYPE		psampFilterRStateAvail OBJECT-TYPE
	SYNTAX PsampMethodAvailability		SYNTAX PsampMethodAvailability
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object indicates the availability of router state		"When retrieved, this object indicates the availability of
	filtering at the managed node."		router state filtering at the managed node."
	DEFVAL { notAvailable }		DEFVAL { notAvailable }
	::= { psampFilterRState 1 }		::= { psampFilterRState 1 }
	-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++		-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++
	-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++		-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++
	psampFilterRStateParamSetTable OBJECT-TYPE		psampFilterRStateParamSetTable OBJECT-TYPE
	SYNTAX SEQUENCE OF		SYNTAX SEQUENCE OF
	PsampFilterRStateParamSetEntry		PsampFilterRStateParamSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This table lists configurations of router state filtering.		"This table lists configurations of router state filtering.
	A parameter set describing a configuration contains six		A parameter set describing a configuration contains six
	skipping to change at page 38, line 39 ¶		skipping to change at page 32, line 36 ¶
	INDEX { psampFilterRStateIndex }		INDEX { psampFilterRStateIndex }
	::= { psampFilterRStateParamSetTable 1 }		::= { psampFilterRStateParamSetTable 1 }
	PsampFilterRStateParamSetEntry ::=		PsampFilterRStateParamSetEntry ::=
	SEQUENCE {		SEQUENCE {
	psampFilterRStateIndex Integer32,		psampFilterRStateIndex Integer32,
	psampFilterRStateFunction INTEGER,		psampFilterRStateFunction INTEGER,
	psampFilterRStateNegate TruthValue,		psampFilterRStateNegate TruthValue,
	psampFilterRStateIfIndex InterfaceIndexOrZero,		psampFilterRStateIfIndex InterfaceIndexOrZero,
	psampFilterRStateStartAS InetAutonomousSystemNumber,		psampFilterRStateStartAS InetAutonomousSystemNumber,
	psampFilterRStateEndAS InetAutonomousSystemNumber,		psampFilterRStateStopAS InetAutonomousSystemNumber,
	psampFilterRStateVendorFunc OBJECT IDENTIFIER,		psampFilterRStateVendorFunc OBJECT IDENTIFIER,
	psampFilterRStateRowStatus RowStatus		psampFilterRStateRowStatus RowStatus
	}		}
	psampFilterRStateIndex OBJECT-TYPE		psampFilterRStateIndex OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)		SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The locally arbitrary, but unique identifier of an entry		"The index of this parameter set in the
	in this parameter set table.		psampFilterRStateParameterSetTable.
			It is used in entries of the psampInstanceTable as
	The value is expected to remain constant at least from one		reference to this parameter set."
	re-initialization of the entity's network management system
	to the next re-initialization.
	It is used in entries of the psampSelectorListTable as
	reference to this method and its associated parameter set."
	::= { psampFilterRStateParamSetEntry 1 }		::= { psampFilterRStateParamSetEntry 1 }
	psampFilterRStateFunction OBJECT-TYPE		psampFilterRStateFunction OBJECT-TYPE
	SYNTAX INTEGER {		SYNTAX INTEGER {
	other (1),		other (1),
	ingressIf (2),		ingressIf (2),
	egressIf (3),		egressIf (3),
	aclViolation (4),		aclViolation (4),
	rpfFailure (5),		rpfFailure (5),
	noResources (6),		noResources (6),
	skipping to change at page 39, line 33 ¶		skipping to change at page 33, line 27 ¶
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object indicates which function is applied to the		"This object indicates which function is applied to the
	router state. The validity of the following objects depends		router state. The validity of the following objects depends
	on the function selected here. The psampFilterRStateIfIndex		on the function selected here. The psampFilterRStateIfIndex
	is only valid if the function is ingressIf or egressIf. The		is only valid if the function is ingressIf or egressIf. The
	psampFilterRstateStartAS/StopAS objects are only valid if		psampFilterRstateStartAS/StopAS objects are only valid if
	the function is originAS or destAS. The		the function is originAS or destAS. The
	psampFilterRStateVendor object is only valid if the function		psampFilterRStateVendor object is only valid if the function
	other is chosen; in that case it points to a vendor specific		other is chosen. Then it point to a vendor specific
	function."		function."
	REFERENCE		REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"		"draft-ietf-psamp-sample-tech-04.txt, Section 5.1"
	-- Editor Note: get reference right!		-- Editor Note: get reference right!
	::= { psampFilterRStateParamSetEntry 2 }		::= { psampFilterRStateParamSetEntry 2 }
	psampFilterRStateNegate OBJECT-TYPE		psampFilterRStateNegate OBJECT-TYPE
	SYNTAX TruthValue		SYNTAX TruthValue
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"If set to true this object will negate the output of the		"If set to true this object will negate the output of the
	psampFilterRStateFunction."		psampFilterRStateFunction."
	skipping to change at page 40, line 11 ¶		skipping to change at page 34, line 4 ¶
	psampFilterRStateIfIndex OBJECT-TYPE		psampFilterRStateIfIndex OBJECT-TYPE
	SYNTAX InterfaceIndexOrZero		SYNTAX InterfaceIndexOrZero
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"Used if the function is egressIf or ingressIf. Selects		"Used if the function is egressIf or ingressIf. Selects
	the packet if the egressIf/ingressIf is the same as the		the packet if the egressIf/ingressIf is the same as the
	interface indicated by this object. If the object is not		interface indicated by this object. If the object is not
	used it contains a value of 0."		used it contains a value of 0."
	DEFVAL { 0 }		DEFVAL { 0 }
	::= { psampFilterRStateParamSetEntry 4 }		::= { psampFilterRStateParamSetEntry 4 }
	psampFilterRStateStartAS OBJECT-TYPE		psampFilterRStateStartAS OBJECT-TYPE
	SYNTAX InetAutonomousSystemNumber		SYNTAX InetAutonomousSystemNumber
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"Used if the function is originAS or destAS. Selects the		"Used if the function is originAS or destAS. Selects the
	packet if the AS Number lies in the range of		packet if the AS Number lies in the range of
	psampFilterRStateStartAS and psampFilterRStateEndAS. If		psampFilterRStateStartAS and psampFilterRStateStopAS. If
	the object is not used it default to 0."		the object is not used it default to 0."
	DEFVAL { 0 }		DEFVAL { 0 }
	::= { psampFilterRStateParamSetEntry 5 }		::= { psampFilterRStateParamSetEntry 5 }
	psampFilterRStateEndAS OBJECT-TYPE		psampFilterRStateStopAS OBJECT-TYPE
	SYNTAX InetAutonomousSystemNumber		SYNTAX InetAutonomousSystemNumber
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"Used if the function is originAS or destAS. Selects the		"Used if the function is originAS or destAS. Selects the
	packet if the AS Number lies in the range of		packet if the AS Number lies in the range of
	psampFilterRStateStartAS and psampFilterRStateStopAS. If		psampFilterRStateStartAS and psampFilterRStateStopAS. If
	psampFilterRStateStartAS is not 0 and this object is 0 then		psampFilterRStateStartAS is not 0 and this object is 0 then
	the range is single value, the value given in		the range is single value, the value given in
	psampFilterRStateStartAS."		psampFilterRStateStartAS."
	skipping to change at page 41, line 30 ¶		skipping to change at page 35, line 22 ¶
	--* Hash Function 0: IPSX		--* Hash Function 0: IPSX
	--==================================================================		--==================================================================
	psampHashIPSX OBJECT IDENTIFIER ::= { psampHashFunctions 0 }		psampHashIPSX OBJECT IDENTIFIER ::= { psampHashFunctions 0 }
	psampHashIPSXAvail OBJECT-TYPE		psampHashIPSXAvail OBJECT-TYPE
	SYNTAX PsampMethodAvailability		SYNTAX PsampMethodAvailability
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object indicates the availability of the IPSX hash		"When retrieved, this object indicates the availability of
	function at the managed node."		the IPSX hash function at the managed node."
	DEFVAL { notAvailable }		DEFVAL { notAvailable }
	::= { psampHashIPSX 1 }		::= { psampHashIPSX 1 }
	-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++		-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++
	-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++		-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++
	psampHashIPSXParamSetTable OBJECT-TYPE		psampHashIPSXParamSetTable OBJECT-TYPE
	SYNTAX SEQUENCE OF		SYNTAX SEQUENCE OF
	PsampHashIPSXParamSetEntry		PsampHashIPSXParamSetEntry
	skipping to change at page 42, line 23 ¶		skipping to change at page 36, line 16 ¶
	SEQUENCE {		SEQUENCE {
	psampHashIPSXIndex Integer32,		psampHashIPSXIndex Integer32,
	psampHashIPSXRowStatus RowStatus		psampHashIPSXRowStatus RowStatus
	}		}
	psampHashIPSXIndex OBJECT-TYPE		psampHashIPSXIndex OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)		SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The locally arbitrary, but unique identifier of an entry		"The index of this parameter set in the
	in this parameter set table.		psampHashIPSXParameterSetTable. It is used in entries of
			the psampFilterHashParamSetTable as reference to this
	The value is expected to remain constant at least from one		parameter set."
	re-initialization of the entity's network management system
	to the next re-initialization.
	It is used in entries of the psampFilterHashParamSetTable
	as reference to this method and its associated parameter
	set."
	::= { psampHashIPSXParamSetEntry 1 }		::= { psampHashIPSXParamSetEntry 1 }
	psampHashIPSXRowStatus OBJECT-TYPE		psampHashIPSXRowStatus OBJECT-TYPE
	SYNTAX RowStatus		SYNTAX RowStatus
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The status of this row of the table."		"The status of this row of the table."
	::= { psampHashIPSXParamSetEntry 2 }		::= { psampHashIPSXParamSetEntry 2 }
	skipping to change at page 43, line 6 ¶		skipping to change at page 36, line 41 ¶
	--* Hash Function 1: Bob		--* Hash Function 1: Bob
	--==================================================================		--==================================================================
	psampHashBob OBJECT IDENTIFIER ::= { psampHashFunctions 1 }		psampHashBob OBJECT IDENTIFIER ::= { psampHashFunctions 1 }
	psampHashBobAvail OBJECT-TYPE		psampHashBobAvail OBJECT-TYPE
	SYNTAX PsampMethodAvailability		SYNTAX PsampMethodAvailability
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object indicates the availability of the Bob hash		"When retrieved, this object indicates the availability of
	function at the managed node."		the Bob hash function at the managed node."
	DEFVAL { notAvailable }		DEFVAL { notAvailable }
	::= { psampHashBob 1 }		::= { psampHashBob 1 }
	-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++		-- Capabilities ++++++++++++++++++++++++++++++++++++++++++++++++++++
	-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++		-- Parameter Set Table +++++++++++++++++++++++++++++++++++++++++++++
	psampHashBobParamSetTable OBJECT-TYPE		psampHashBobParamSetTable OBJECT-TYPE
	SYNTAX SEQUENCE OF		SYNTAX SEQUENCE OF
	PsampHashBobParamSetEntry		PsampHashBobParamSetEntry
	skipping to change at page 43, line 48 ¶		skipping to change at page 37, line 35 ¶
	SEQUENCE {		SEQUENCE {
	psampHashBobIndex Integer32,		psampHashBobIndex Integer32,
	psampHashBobRowStatus RowStatus		psampHashBobRowStatus RowStatus
	}		}
	psampHashBobIndex OBJECT-TYPE		psampHashBobIndex OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)		SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The locally arbitrary, but unique identifier of an entry		"The index of this parameter set in the
	in this parameter set table.		psampHashBobParameterSetTable. It is used in entries of the
			psampFilterHashParamSetTable as reference to this parameter
	The value is expected to remain constant at least from one
	re-initialization of the entity's network management system
	to the next re-initialization.
	It is used in entries of the psampFilterHashParamSetTable
	as reference to this method and its associated parameter
	set."		set."
	::= { psampHashBobParamSetEntry 1 }		::= { psampHashBobParamSetEntry 1 }
	psampHashBobRowStatus OBJECT-TYPE		psampHashBobRowStatus OBJECT-TYPE
	SYNTAX RowStatus		SYNTAX RowStatus
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The status of this row of the table."		"The status of this row of the table."
	::= { psampHashBobParamSetEntry 2 }		::= { psampHashBobParamSetEntry 2 }
	--==================================================================		--==================================================================
	-- Reporting Group
	--==================================================================
	psampReporting OBJECT IDENTIFIER ::= { psampObjects 4 }
	-- Collector Table +++++++++++++++++++++++++++++++++++++++++++++++++
	psampCollectorTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PsampCollectorEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"This table lists collectors to which PSAMP selected
	packets are exported."
	::= { psampReporting 1 }
	psampCollectorEntry OBJECT-TYPE
	SYNTAX PsampCollectorEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"Defines an entry in the psampCollectorTable."
	INDEX { psampCollectorIndex }
	::= { psampCollectorTable 1 }
	PsampCollectorEntry ::= SEQUENCE {
	psampCollectorIndex Integer32,
	psampCollectorDstIpAddressType InetAddressType,
	psampCollectorDstIpAddress InetAddress,
	psampCollectorDstProtocol Integer32,
	psampCollectorDstPort Integer32,
	psampCollectorReportsSent Integer32,
	psampCollectorRowStatus RowStatus
	}
	psampCollectorIndex OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"The locally arbitrary, but unique identifier of an entry
	in this collector table.
	The value is expected to remain constant at least from one
	re-initialization of the entity's network management system
	to the next re-initialization.
	It is used in entries of the psampCollectorGroupTable as
	reference to this collector and its associated parameters."
	::= { psampCollectorEntry 1 }
	psampCollectorDstIpAddressType OBJECT-TYPE
	SYNTAX InetAddressType
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"The IP address type of the collector. The value for IPv4
	is ipv4(1). The value for IPv6 is ipv6(2)."
	::= { psampCollectorEntry 2 }
	psampCollectorDstIpAddress OBJECT-TYPE
	SYNTAX InetAddress
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"The IP address of the collector."
	::= { psampCollectorEntry 3 }
	psampCollectorDstProtocol OBJECT-TYPE
	SYNTAX Integer32 (0..256)
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"The transport protocol used for exporting sampled packets
	to the collector. The recommended protocols are TCP (6),
	UDP (17) and SCTP (132). The default is SCTP."
	DEFVAL { 132 }
	::= { psampCollectorEntry 4 }
	psampCollectorDstPort OBJECT-TYPE
	SYNTAX Integer32 (0..65535)
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"The transport protocol port number of the collector."
	::= { psampCollectorEntry 5 }
	psampCollectorReportsSent OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The number of packet reports sent to the collector."
	::= { psampCollectorEntry 6 }
	psampCollectorRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"The status of this row of the table."
	::= { psampCollectorEntry 7 }
	-- Collector Group Table +++++++++++++++++++++++++++++++++++++++++++
	psampCollectorGroupTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PsampCollectorGroupEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"This table lists groups of collectors to which PSAMP
	selected packets are exported simultaneously. If PSAMP
	selected packets are exported to only one collector the
	group consists of exactly one collector."
	::= { psampReporting 2 }
	psampCollectorGroupEntry OBJECT-TYPE
	SYNTAX PsampCollectorGroupEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"Defines an entry in the psampCollectorGroupTable."
	INDEX { psampCollectorGroupIndex, psampCollectorIndex }
	::= { psampCollectorGroupTable 1 }
	PsampCollectorGroupEntry ::= SEQUENCE {
	psampCollectorGroupIndex Integer32,
	psampCollectorGroupRowStatus RowStatus
	}
	psampCollectorGroupIndex OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"The locally arbitrary, but unique identifier of an entry
	in this parameter set table.
	The value is expected to remain constant at least from one
	re-initialization of the entity's network management system
	to the next re-initialization.
	It is used in entries of the psampBaseAssocTable as
	reference to this collector group and its associated
	parameters."
	::= { psampCollectorGroupEntry 1 }
	psampCollectorGroupRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"The status of this row of the table."
	::= { psampCollectorGroupEntry 3 }
	-- (Data) Template Record Table
	psampTemplateRecordTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PsampTemplateRecordEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"This table lists templates used by the exporter."
	::= { psampReporting 3 }
	psampTemplateRecordEntry OBJECT-TYPE
	SYNTAX PsampTemplateRecordEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"Defines an entry in the psampTemplateTable."
	INDEX { psampTemplateRecordId, psampTemplateRecordIndex }
	::= { psampTemplateRecordTable 1 }
	PsampTemplateRecordEntry ::= SEQUENCE {
	psampTemplateRecordId Integer32,
	psampTemplateRecordIndex Integer32,
	psampTemplateRecordInfoElementId Integer32,
	psampTemplateRecordRowStatus RowStatus
	}
	psampTemplateRecordId OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"The locally arbitrary, but unique identifier of an entry
	in this template record table.
	The value is expected to remain constant at least from one
	re-initialization of the entity's network management system
	to the next re-initialization.
	It is used in entries of the psampBaseAssocTable as
	reference to this template record and its associated
	parameters. It groups the information element ids in a
	template record."
	REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, Section 5.1"
	-- Editor Note: get reference right!
	::= { psampTemplateRecordEntry 1 }
	psampTemplateRecordIndex OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"The locally arbitrary, but unique identifier of a
	information element id in the template record identified by
	psampTemplateRecordId.
	The value is expected to remain constant at least from one
	re-initialization of the entity's network management system
	to the next re-initialization.
	The psampTemplateRecordIndex specifies the order in which
	the informatation element ids are used in the template
	record."
	::= { psampTemplateRecordEntry 2 }
	psampTemplateRecordInfoElementId OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The Information Element Id at position
	psampTemplateRecordIndex in the template
	psampTemplateRecordId. This implicitly gives the data type
	and state values that are exported."
	REFERENCE
	"draft-ietf-psamp-sample-tech-07.txt, IPFIX/PSAMP INFO MODEL"
	-- Editor Note: get reference right!
	::= { psampTemplateRecordEntry 3 }
	psampTemplateRecordRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"The status of this row of the table."
	::= { psampTemplateRecordEntry 4 }
	--==================================================================
	-- Base Associations Group
	--==================================================================
	psampBaseAssociations OBJECT IDENTIFIER ::= { psampObjects 5 }
	psampBaseAssociationTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PsampBaseAssociationEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"This table lists all base associations at the managed
	node."
	::= { psampBaseAssociations 1 }
	psampBaseAssociationEntry OBJECT-TYPE
	SYNTAX PsampBaseAssociationEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"Defines an entry in the psampInstanceTable."
	INDEX { psampBaseAssocIndex }
	::= { psampBaseAssociationTable 1 }
	PsampBaseAssociationEntry ::= SEQUENCE {
	psampBaseAssocIndex Integer32,
	psampBaseAssocObservationPoint OBJECT IDENTIFIER,
	psampBaseAssocTemplateRecordId Integer32,
	psampBaseAssocCollectorGrpIndex Integer32,
	psampBaseAssocPacketsObserved Integer32,
	psampBaseAssocPacketsDropped Integer32,
	psampBaseAssocMeteringProcessId Integer32,
	psampBaseAssocReportingProcessId Integer32,
	psampBaseAssocReportsSent Integer32,
	psampBaseAssocRowStatus RowStatus
	}
	psampBaseAssocIndex OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"The locally arbitrary, but unique identifier of the base
	associations.
	The value is expected to remain constant at least from one
	re-initialization of the entity's network management system
	to the next re-initialization."
	::= { psampBaseAssociationEntry 1 }
	psampBaseAssocObservationPoint OBJECT-TYPE
	SYNTAX OBJECT IDENTIFIER
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"The point where the packet is observed. If it is e.g, an
	interface it points to the mib-II object of the interface."
	::= { psampBaseAssociationEntry 2 }
	psampBaseAssocTemplateRecordId OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"The Id of a template in the template table. This implies
	the knowledge about the method chain from the method chain
	table. Furthermore it links the instance, method chain
	(selector) and template together.
	The identified template is applied to the stream of
	filtered/sampled packets observed after applying the method
	chain at the observation point."
	::= { psampBaseAssociationEntry 3 }
	psampBaseAssocCollectorGrpIndex OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"The index of the collector group to which packet reports
	are sent."
	::= { psampBaseAssociationEntry 4 }
	psampBaseAssocPacketsObserved OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The number of packets passing at the observation point."
	::= { psampBaseAssociationEntry 5 }
	psampBaseAssocPacketsDropped OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The number of packets dropped while filtering/sampling
	packets due to lack of resources."
	::= { psampBaseAssociationEntry 6 }
	psampBaseAssocMeteringProcessId OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The process id of the metering process used by this
	Base Association."
	::= { psampBaseAssociationEntry 7 }
	psampBaseAssocReportingProcessId OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The process id of the reporting process used by this
	Base Association."
	::= { psampBaseAssociationEntry 8 }
	psampBaseAssocReportsSent OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The number of packet reports on sampled packets sent to
	the collector."
	::= { psampBaseAssociationEntry 9 }
	psampBaseAssocRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"The status of this row of the table."
	::= { psampBaseAssociationEntry 10 }
	-- Selector List Table ++++++++++++++++++++++++++++++++++++++++++++++
	psampSelectorListTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PsampSelectorListEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"This table contains lists of selectors and connects them
	to the base associations where they are applied to
	different observation points. The packets that are selected
	by the last selection method are then exported."
	::= { psampBaseAssociations 4 }
	psampSelectorListEntry OBJECT-TYPE
	SYNTAX PsampSelectorListEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"Defines an entry in the psampSelectorListTable."
	INDEX { psampBaseAssocIndex, psampSelectorListIndex }
	::= { psampSelectorListTable 1 }
	PsampSelectorListEntry ::= SEQUENCE {
	psampSelectorListIndex Integer32,
	psampSelectorListMethod OBJECT IDENTIFIER,
	psampSelectorListPacketsObserved Integer32,
	psampSelectorListPacketsDropped Integer32,
	psampSelectorListRowStatus RowStatus
	}
	psampSelectorListIndex OBJECT-TYPE
	SYNTAX Integer32 (1..2147483647)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"The locally arbitrary, but unique identifier of an entry
	in this selector list table.
	The value is expected to remain constant at least from one
	re-initialization of the entity's network management system
	to the next re-initialization.
	It is used in entries of the psampBaseAssocTable as
	reference to this selector list and its associated
	parameters."
	::= { psampSelectorListEntry 2 }
	psampSelectorListMethod OBJECT-TYPE
	SYNTAX OBJECT IDENTIFIER
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"The selector used at a certain position in the selector
	list."
	::= { psampSelectorListEntry 3 }
	psampSelectorListPacketsObserved OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The number of packets observed at the method entry point."
	::= { psampSelectorListEntry 4 }
	psampSelectorListPacketsDropped OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The number of packets dropped due to lack of resources by
	this selection method."
	::= { psampSelectorListEntry 5 }
	psampSelectorListRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"The status of this row of the table."
	::= { psampSelectorListEntry 6 }
	--==================================================================
	-- Conformance information		-- Conformance information
	--==================================================================		--==================================================================
	psampCompliances OBJECT IDENTIFIER ::= { psampConformance 1 }		psampCompliances OBJECT IDENTIFIER ::= { psampConformance 1 }
	psampGroups OBJECT IDENTIFIER ::= { psampConformance 2 }		psampGroups OBJECT IDENTIFIER ::= { psampConformance 2 }
	--==================================================================		--==================================================================
	-- Compliance statements		-- Compliance statements
	--==================================================================		--==================================================================
	psampCompliance MODULE-COMPLIANCE		psampCompliance MODULE-COMPLIANCE
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"An implementation that complies to this module must		"An implementation that complies to this module must
	implement the objects defined in the mandatory groups		implement the objects defined in the mandatory groups
	psampGroupMetering and psampGroupReporting. The		ipfixGroupMetering and ipfixGroupReporting. The
	implementation of all other objects depends on the		implementation of all other objects depends on the
	implementation of the corresponding functionality in the		implementation of the corresponding functionality in the
	equipment."		equipment."
	MODULE -- this module		MODULE -- this module
	MANDATORY-GROUPS {		MANDATORY-GROUPS {
	psampGroupMetering,		psampGroupSelectAll,
	psampGroupReporting		ipfixGroupMetering,
			ipfixGroupReporting
	}		}
	GROUP psampGroupSampCountBased		GROUP psampGroupSampCountBased
	DESCRIPTION		DESCRIPTION
	"These objects must be implemented if the corresponding		"These objects must be implemented if the corresponding
	sampling function is implemented in the equipment."		sampling function is implemented in the equipment."
	GROUP psampGroupSampTimeBased		GROUP psampGroupSampTimeBased
	DESCRIPTION		DESCRIPTION
	"These objects must be implemented if the corresponding		"These objects must be implemented if the corresponding
	sampling function is implemented in the equipment."		sampling function is implemented in the equipment."
	GROUP psampGroupSampRandOutOfN		GROUP psampGroupSampRandOutOfN
	skipping to change at page 55, line 4 ¶		skipping to change at page 39, line 6 ¶
	"These objects must be implemented if the corresponding		"These objects must be implemented if the corresponding
	sampling function is implemented in the equipment."		sampling function is implemented in the equipment."
	GROUP psampGroupSampFlowState		GROUP psampGroupSampFlowState
	DESCRIPTION		DESCRIPTION
	"These objects must be implemented if the corresponding		"These objects must be implemented if the corresponding
	sampling function is implemented in the equipment."		sampling function is implemented in the equipment."
	GROUP psampGroupFilterMatch		GROUP psampGroupFilterMatch
	DESCRIPTION		DESCRIPTION
	"These objects must be implemented if the corresponding		"These objects must be implemented if the corresponding
	filter function is implemented in the equipment."		filter function is implemented in the equipment."
	GROUP psampGroupFilterHash		GROUP psampGroupFilterHash
	DESCRIPTION		DESCRIPTION
	"These objects must be implemented if the corresponding		"These objects must be implemented if the corresponding
	filter function is implemented in the equipment."		filter function is implemented in the equipment."
	GROUP psampGroupFilterRState		GROUP psampGroupFilterRState
	DESCRIPTION		DESCRIPTION
	"These objects must be implemented if the corresponding		"These objects must be implemented if the corresponding
	filter function is implemented in the equipment."		filter function is implemented in the equipment."
	GROUP psampGroupHashIPSX		GROUP psampGroupHashIPSX
	DESCRIPTION		DESCRIPTION
	"These objects must be implemented if the corresponding		"These objects must be implemented if the corresponding
	hash function is implemented in the equipment."		hash function is implemented in the equipment."
	GROUP psampGroupHashBob		GROUP psampGroupHashBob
	DESCRIPTION		DESCRIPTION
	"These objects must be implemented if the corresponding		"These objects must be implemented if the corresponding
	hash function is implemented in the equipment."		hash function is implemented in the equipment."
	GROUP psampGroupStatistics
	DESCRIPTION
	"These objects must be implemented if statistics are
	implemented on the equipment."
	::= { psampCompliances 1 }		::= { psampCompliances 1 }
	--==================================================================		--==================================================================
	-- MIB groupings		-- MIB groupings
	--==================================================================		--==================================================================
	psampGroupMetering OBJECT-GROUP		psampGroupSelectAll OBJECT-GROUP
	OBJECTS {		OBJECTS {
	psampSelectAllAvail,		psampSelectAllAvail
	psampSampCountBasedAvail,
	psampSampTimeBasedAvail,
	psampSampRandOutOfNAvail,
	psampSampUniProbAvail,
	psampSampNonUniProbAvail,
	psampSampFlowStateAvail,
	psampFilterMatchAvail,
	psampFilterHashAvail,
	psampFilterRStateAvail,
	psampHashIPSXAvail,
	psampHashBobAvail,
	psampTemplateRecordInfoElementId,
	psampTemplateRecordRowStatus,
	psampSelectorListMethod,
	psampSelectorListRowStatus,
	psampBaseAssocObservationPoint,
	psampBaseAssocTemplateRecordId,
	psampBaseAssocCollectorGrpIndex,
	psampBaseAssocMeteringProcessId,
	psampBaseAssocReportingProcessId,
	psampBaseAssocRowStatus
	}		}
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"All objects that are basic for the metering process. It		"The select all Method that must be present on all PSAMP
	contains a basic metering function (psampSelectAll), The		complient devices."
	template definitions needed for the export of data, the
	method chain that fixes the metering functions applied to
	the observation point and several parameters concering
	the export process and the collectors."
	::= { psampGroups 1 }		::= { psampGroups 1 }
	psampGroupSampCountBased OBJECT-GROUP		psampGroupSampCountBased OBJECT-GROUP
	OBJECTS {		OBJECTS {
			psampSampCountBasedAvail,
	psampSampCountBasedMaxInterval,		psampSampCountBasedMaxInterval,
	psampSampCountBasedMinSpacing,		psampSampCountBasedMaxSpacing,
	psampSampCountBasedInterval,		psampSampCountBasedInterval,
	psampSampCountBasedSpacing,		psampSampCountBasedSpacing,
	psampSampCountBasedRowStatus		psampSampCountBasedRowStatus
	}		}
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"These objects are needed if count based sampling is		"These objects are needed if count based sampling is
	implemented."		implemented."
	::= { psampGroups 2 }		::= { psampGroups 2 }
	psampGroupSampTimeBased OBJECT-GROUP		psampGroupSampTimeBased OBJECT-GROUP
	OBJECTS {		OBJECTS {
			psampSampTimeBasedAvail,
	psampSampTimeBasedMaxInterval,		psampSampTimeBasedMaxInterval,
	psampSampTimeBasedMinSpacing,		psampSampTimeBasedMaxSpacing,
	psampSampTimeBasedInterval,		psampSampTimeBasedInterval,
	psampSampTimeBasedSpacing,		psampSampTimeBasedSpacing,
	psampSampTimeBasedRowStatus		psampSampTimeBasedRowStatus
	}		}
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"These objects are needed if time based sampling is		"These objects are needed if time based sampling is
	implemented."		implemented."
	::= { psampGroups 3 }		::= { psampGroups 3 }
	psampGroupSampRandOutOfN OBJECT-GROUP		psampGroupSampRandOutOfN OBJECT-GROUP
	OBJECTS {		OBJECTS {
			psampSampRandOutOfNAvail,
	psampSampRandOutOfNMaxPopulation,		psampSampRandOutOfNMaxPopulation,
			psampSampRandOutOfNMaxSample,
	psampSampRandOutOfNPopulation,		psampSampRandOutOfNPopulation,
	psampSampRandOutOfNSample,		psampSampRandOutOfNSample,
	psampSampRandOutOfNRowStatus		psampSampRandOutOfNRowStatus
	}		}
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"These objects are needed if random n-out-of-N sampling is		"These objects are needed if random n-out-of-N sampling is
	implemented."		implemented."
	::= { psampGroups 4 }		::= { psampGroups 4 }
	psampGroupSampUniProb OBJECT-GROUP		psampGroupSampUniProb OBJECT-GROUP
	OBJECTS {		OBJECTS {
			psampSampUniProbAvail,
	psampSampUniProbProbability,		psampSampUniProbProbability,
	psampSampUniProbRowStatus		psampSampUniProbRowStatus
	}		}
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"These objects are needed if uniform probabilistic sampling		"These objects are needed if uniform probabilistic sampling
	is implemented."		is implemented."
	::= { psampGroups 5 }		::= { psampGroups 5 }
	psampGroupSampNonUniProb OBJECT-GROUP		psampGroupSampNonUniProb OBJECT-GROUP
	OBJECTS {		OBJECTS {
			psampSampNonUniProbAvail,
	psampSampNonUniProbFunction,		psampSampNonUniProbFunction,
	psampSampNonUniProbFuncParam,		psampSampNonUniProbFuncParam,
	psampSampNonUniProbRowStatus		psampSampNonUniProbRowStatus
	}		}
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"These objects are needed if non-uniform probabilistic		"These objects are needed if non-uniform probabilistic
	sampling is implemented."		sampling is implemented."
	::= { psampGroups 6 }		::= { psampGroups 6 }
	psampGroupSampFlowState OBJECT-GROUP		psampGroupSampFlowState OBJECT-GROUP
	OBJECTS {		OBJECTS {
			psampSampFlowStateAvail,
	psampSampFlowStateFunction,		psampSampFlowStateFunction,
	psampSampFlowStateFuncParam,		psampSampFlowStateFuncParam,
	psampSampFlowStateRowStatus		psampSampFlowStateRowStatus
	}		}
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"These objects are needed if flow state sampling is		"These objects are needed if flow state sampling is
	implemented."		implemented."
	::= { psampGroups 7 }		::= { psampGroups 7 }
	psampGroupFilterMatch OBJECT-GROUP		psampGroupFilterMatch OBJECT-GROUP
	OBJECTS {		OBJECTS {
	psampFilterMatchInfoElementId,		psampFilterMatchAvail,
			psampFilterMatchFieldId,
	psampFilterMatchStartValue,		psampFilterMatchStartValue,
	psampFilterMatchEndValue,		psampFilterMatchStopValue,
	psampFilterMatchMask,		psampFilterMatchMask,
	psampFilterMatchRowStatus		psampFilterMatchRowStatus
	}		}
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"These objects are needed if match filtering is implemented."		"These objects are needed if match filtering is implemented."
	::= { psampGroups 8 }		::= { psampGroups 8 }
	psampGroupFilterHash OBJECT-GROUP		psampGroupFilterHash OBJECT-GROUP
	OBJECTS {		OBJECTS {
			psampFilterHashAvail,
	psampFilterHashAddrType,		psampFilterHashAddrType,
	psampFilterHashHeaderBits,		psampFilterHashHeaderBits,
	psampFilterHashPayloadBytes,		psampFilterHashPayloadBytes,
	psampFilterHashPayloadBits,		psampFilterHashPayloadBits,
	psampFilterHashFunction,		psampFilterHashFunction,
	psampFilterHashFuncParam,		psampFilterHashFuncParam,
	psampFilterHashInputBits,		psampFilterHashInputBits,
	psampFilterHashOutputBits,		psampFilterHashOutputBits,
	psampFilterHashOutputMask,		psampFilterHashOutputMask,
	psampFilterHashSelection,		psampFilterHashSelection,
	skipping to change at page 58, line 26 ¶		skipping to change at page 42, line 4 ¶
	psampFilterHashHeaderBits,		psampFilterHashHeaderBits,
	psampFilterHashPayloadBytes,		psampFilterHashPayloadBytes,
	psampFilterHashPayloadBits,		psampFilterHashPayloadBits,
	psampFilterHashFunction,		psampFilterHashFunction,
	psampFilterHashFuncParam,		psampFilterHashFuncParam,
	psampFilterHashInputBits,		psampFilterHashInputBits,
	psampFilterHashOutputBits,		psampFilterHashOutputBits,
	psampFilterHashOutputMask,		psampFilterHashOutputMask,
	psampFilterHashSelection,		psampFilterHashSelection,
	psampFilterHashRowStatus		psampFilterHashRowStatus
	}		}
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"These objects are needed if hash filtering is implemented."		"These objects are needed if hash filtering is implemented."
	::= { psampGroups 9 }		::= { psampGroups 9 }
	psampGroupFilterRState OBJECT-GROUP		psampGroupFilterRState OBJECT-GROUP
	OBJECTS {		OBJECTS {
			psampFilterRStateAvail,
	psampFilterRStateFunction,		psampFilterRStateFunction,
	psampFilterRStateNegate,		psampFilterRStateNegate,
	psampFilterRStateIfIndex,		psampFilterRStateIfIndex,
	psampFilterRStateStartAS,		psampFilterRStateStartAS,
	psampFilterRStateEndAS,		psampFilterRStateStopAS,
	psampFilterRStateVendorFunc,		psampFilterRStateVendorFunc,
	psampFilterRStateRowStatus		psampFilterRStateRowStatus
	}		}
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"These objects are needed if router state filtering is		"These objects are needed if router state filtering is
	implemented."		implemented."
	::= { psampGroups 10 }		::= { psampGroups 10 }
	psampGroupHashIPSX OBJECT-GROUP		psampGroupHashIPSX OBJECT-GROUP
	OBJECTS {		OBJECTS {
			psampHashIPSXAvail,
	psampHashIPSXRowStatus		psampHashIPSXRowStatus
	}		}
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"These objects are needed if the IPSX hash function is		"These objects are needed if the IPSX hash function is
	implemented."		implemented."
	::= { psampGroups 11 }		::= { psampGroups 11 }
	psampGroupHashBob OBJECT-GROUP		psampGroupHashBob OBJECT-GROUP
	OBJECTS {		OBJECTS {
			psampHashBobAvail,
	psampHashBobRowStatus		psampHashBobRowStatus
	}		}
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"These objects are needed if the Bob hash function is		"These objects are needed if the Bob hash function is
	implemented."		implemented."
	::= { psampGroups 12 }		::= { psampGroups 12 }
	psampGroupReporting OBJECT-GROUP
	OBJECTS {
	psampCollectorDstIpAddressType,
	psampCollectorDstIpAddress,
	psampCollectorDstProtocol,
	psampCollectorDstPort,
	psampCollectorRowStatus,
	psampCollectorGroupRowStatus
	}
	STATUS current
	DESCRIPTION
	"These objects define the collectors i.e., the destinations
	of the exporting process."
	::= { psampGroups 13 }
	psampGroupStatistics OBJECT-GROUP
	OBJECTS {
	psampCollectorReportsSent,
	psampSelectorListPacketsObserved,
	psampSelectorListPacketsDropped,
	psampBaseAssocPacketsObserved,
	psampBaseAssocReportsSent,
	psampBaseAssocPacketsDropped
	}
	STATUS current
	DESCRIPTION
	"These objects contain statistical values gathered at
	different points in the metering process."
	::= { psampGroups 14 }
	END		END
	7. Security Considerations		7. Security Considerations
	There are a number of management objects defined in this MIB module		There are a number of management objects defined in this MIB module
	with a MAX-ACCESS clause of read-write and/or read-create. Such		with a MAX-ACCESS clause of read-write and/or read-create. Such
	objects may be considered sensitive or vulnerable in some network		objects may be considered sensitive or vulnerable in some network
	environments. The support for SET operations in a non-secure		environments. The support for SET operations in a non-secure
	environment without proper protection can have a negative effect on		environment without proper protection can have a negative effect on
	network operations.		network operations.
	8. Acknowledgment		8. IANA Considerations
	This document is a product of the PSAMP working group.		This document requires no assignment to be made by IANA.
	9. References		9. Acknowledgment
	9.1. Normative References		This document is a product of the PSAMP working group.
	[1] Duffield, N., "A Framework for Packet Selection and Reporting",		10. References
	draft-ietf-psamp-framework-10 (work in progress), January 2005.
	[2] Zseby, T., "Sampling and Filtering Techniques for IP Packet		10.1. Normative References
	Selection", draft-ietf-psamp-sample-tech-07 (work in progress),
	July 2005.
	[3] Claise, B., "Packet Sampling (PSAMP) Protocol Specifications",		[I-D.ietf-psamp-framework]
	draft-ietf-psamp-protocol-01 (work in progress), February 2004.		Duffield, N., "A Framework for Packet Selection and
			Reporting", draft-ietf-psamp-framework-10 (work in
			progress), January 2005.
	[4] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,		[I-D.ietf-psamp-sample-tech]
	McCloghrie, K., Rose, M., and S. Waldbusser, "Structure of		Zseby, T., "Sampling and Filtering Techniques for IP
	Management Information Version 2 (SMIv2)", STD 58, RFC 2578,		Packet Selection", draft-ietf-psamp-sample-tech-07 (work
	April 1999.		in progress), July 2005.
	[5] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,		[I-D.ietf-psamp-protocol]
	McCloghrie, K., Rose, M., and S. Waldbusser, "Textual		Claise, B., "Packet Sampling (PSAMP) Protocol
	Conventions for SMIv2", STD 58, RFC 2579, April 1999.		Specifications", draft-ietf-psamp-protocol-05 (work in
			progress), April 2006.
	[6] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Conformance		[I-D.ietf-ipfix-protocol]
	Statements for SMIv2", STD 58, RFC 2580, April 1999.		Claise, B., "IPFIX Protocol Specification",
			draft-ietf-ipfix-protocol-20 (work in progress),
			April 2006.
	[7] Dietz, T., "Information Model for Packet Sampling Exports",		[I-D.dietz-ipfix-mib]
	draft-ietf-psamp-info-02 (work in progress), July 2004.		Dietz, T., Kobayashi, A., and B. Claise, "Definitions of
			Managed Objects for IP Flow Information Export",
			draft-dietz-ipfix-mib-00 (work in progress), June 2006.
	9.2. Informative References		[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J.
			Schoenwaelder, Ed., "Structure of Management Information
			Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
	[8] Bradner, S., "Key words for use in RFCs to Indicate Requirement		[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.
	Levels", BCP 14, RFC 2119, March 1997.		Schoenwaelder, Ed., "Textual Conventions for SMIv2",
			STD 58, RFC 2579, April 1999.
	[9] Quittek, J., "Requirements for IP Flow Information Export",		[RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
	draft-ietf-ipfix-reqs-16 (work in progress), June 2004.		"Conformance Statements for SMIv2", STD 58, RFC 2580,
			April 1999.
	[10] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction		10.2. Informative References
	and Applicability Statements for Internet-Standard Management
	Framework", RFC 3410, December 2002.
	[11] Quittek, J., "Information Model for IP Flow Information		[I-D.ietf-psamp-info]
	Export", draft-ietf-ipfix-info-11 (work in progress),		Dietz, T., "Information Model for Packet Sampling
	September 2005.		Exports", draft-ietf-psamp-info-04 (work in progress),
			March 2006.
	[12] Sadasivan, G., "Architecture for IP Flow Information Export",		[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
	draft-ietf-ipfix-architecture-09 (work in progress),		Requirement Levels", BCP 14, RFC 2119, March 1997.
	August 2005.
			[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
			"Introduction and Applicability Statements for Internet-
			Standard Management Framework", RFC 3410, December 2002.
	Authors' Addresses		Authors' Addresses
	Thomas Dietz (editor)		Thomas Dietz (editor)
	NEC Europte Ltd.		NEC Europte Ltd.
	Network Laboratories		Network Laboratories
	Kurfuersten-Anlage 36		Kurfuersten-Anlage 36
	69115 Heidelberg		Heidelberg 69115
	Germany		DE
	Phone: +49 6221 90511-28		Phone: +49 6221 4342-128
	Email: dietz@netlab.nec.de		Email: dietz@netlab.nec.de
	Benoit Claise		Benoit Claise
	Cisco Systems		Cisco Systems
	De Kleetlaan 6a b1		De Kleetlaan 6a b1
	1831 Degem		Degem 1831
	Belgium		BE
	Phone: +32 2 704 5622		Phone: +32 2 704 5622
	Email: bclaise@cisco.com		Email: bclaise@cisco.com
	Intellectual Property Statement		Intellectual Property Statement
	The IETF takes no position regarding the validity or scope of any		The IETF takes no position regarding the validity or scope of any
	Intellectual Property Rights or other rights that might be claimed to		Intellectual Property Rights or other rights that might be claimed to
	pertain to the implementation or use of the technology described in		pertain to the implementation or use of the technology described in
	this document or the extent to which any license under such rights		this document or the extent to which any license under such rights
	skipping to change at page 63, line 41 ¶		skipping to change at page 46, line 41 ¶
	This document and the information contained herein are provided on an		This document and the information contained herein are provided on an
	"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS		"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
	OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET		OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
	ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,		ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
	INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE		INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
	INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED		INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
	WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.		WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
	Copyright Statement		Copyright Statement
	Copyright (C) The Internet Society (2005). This document is subject		Copyright (C) The Internet Society (2006). This document is subject
	to the rights, licenses and restrictions contained in BCP 78, and		to the rights, licenses and restrictions contained in BCP 78, and
	except as set forth therein, the authors retain all their rights.		except as set forth therein, the authors retain all their rights.
	Acknowledgment		Acknowledgment
	Funding for the RFC Editor function is currently provided by the		Funding for the RFC Editor function is currently provided by the
	Internet Society.		Internet Society.
End of changes. 236 change blocks.
	1321 lines changed or deleted		512 lines changed or added
This html diff was produced by rfcdiff 1.48. The latest version is available from http://tools.ietf.org/tools/rfcdiff/