idnits 2.17.1 draft-ietf-ipp-media-engineering-00.txt: Checking boilerplate required by RFC 5378 and the IETF Trust (see https://trustee.ietf.org/license-info): ---------------------------------------------------------------------------- ** Looks like you're using RFC 2026 boilerplate. This must be updated to follow RFC 3978/3979, as updated by RFC 4748. Checking nits according to https://www.ietf.org/id-info/1id-guidelines.txt: ---------------------------------------------------------------------------- ** Missing expiration date. The document expiration date should appear on the first and last page. ** The document seems to lack a 1id_guidelines paragraph about Internet-Drafts being working documents. ** The document seems to lack a 1id_guidelines paragraph about the list of Shadow Directories -- however, there's a paragraph with a matching beginning. Boilerplate error? ** The document is more than 15 pages and seems to lack a Table of Contents. == No 'Intended status' indicated for this document; assuming Proposed Standard == The page length should not exceed 58 lines per page, but there was 25 longer pages, the longest (page 4) being 68 lines == It seems as if not all pages are separated by form feeds - found 0 form feeds but 25 pages Checking nits according to https://www.ietf.org/id-info/checklist : ---------------------------------------------------------------------------- ** The document seems to lack separate sections for Informative/Normative References. All references will be assumed normative when checking for downward references. ** The abstract seems to contain references ([RFC2568], [RFC2616], [RFC2569], [RFC2567]), which it shouldn't. Please replace those with straight textual mentions of the documents in question. == There are 1 instance of lines with non-RFC2606-compliant FQDNs in the document. ** The document seems to lack a both a reference to RFC 2119 and the recommended RFC 2119 boilerplate, even if it appears to use RFC 2119 keywords. RFC 2119 keyword, line 59: '... IPP/1.0. A few OPTIONAL operator ope...' RFC 2119 keyword, line 156: '...ection 14. An administrator MAY define...' RFC 2119 keyword, line 1041: '... implementations MAY support different...' Miscellaneous warnings: ---------------------------------------------------------------------------- == The copyright year in the RFC 3978 Section 5.4 Copyright Line does not match the current year == Line 1127 has weird spacing: '...for the purpo...' -- The document seems to lack a disclaimer for pre-RFC5378 work, but may have content which was first submitted before 10 November 2008. If you have contacted all the original authors and they are all willing to grant the BCP78 rights to the IETF Trust, then this is fine, and you can ignore this comment. If not, you may need to add the pre-RFC5378 disclaimer. (See the Legal Provisions document at https://trustee.ietf.org/license-info for more information.) -- The document date (October 8, 1999) is 8957 days in the past. Is this intentional? Checking references for intended status: Proposed Standard ---------------------------------------------------------------------------- (See RFCs 3967 and 4897 for information about using normative references to lower-maturity documents in RFCs) == Missing Reference: 'RFC2026' is mentioned on line 21, but not defined == Missing Reference: 'RFC2616' is mentioned on line 70, but not defined ** Obsolete undefined reference: RFC 2616 (Obsoleted by RFC 7230, RFC 7231, RFC 7232, RFC 7233, RFC 7234, RFC 7235) == Missing Reference: 'ISO10175' is mentioned on line 178, but not defined == Missing Reference: 'RFC1759' is mentioned on line 179, but not defined ** Obsolete undefined reference: RFC 1759 (Obsoleted by RFC 3805) == Unused Reference: 'RFC2639' is defined on line 1089, but no explicit reference was found in the text ** Obsolete normative reference: RFC 2565 (Obsoleted by RFC 2910) ** Obsolete normative reference: RFC 2566 (Obsoleted by RFC 2911) ** Downref: Normative reference to an Experimental RFC: RFC 2567 ** Downref: Normative reference to an Experimental RFC: RFC 2568 ** Downref: Normative reference to an Experimental RFC: RFC 2569 ** Obsolete normative reference: RFC 2639 (Obsoleted by RFC 3196) Summary: 16 errors (**), 0 flaws (~~), 11 warnings (==), 2 comments (--). Run idnits with the --verbose option for more detailed information about the items above. -------------------------------------------------------------------------------- 1 INTERNET-DRAFT 2 3 T. Hastings 4 Xerox Corporation 5 D. Fullman 6 Xerox Corporation 7 October 8, 1999 9 Internet Printing Protocol/1.1: "media" Engineering attribute values 10 extension 12 Copyright (C) The Internet Society (1999). All Rights Reserved. 14 Status of this Memo 16 This document is an Internet-Draft and is in full conformance with all 17 provisions of Section 10 of [RFC2026]. Internet-Drafts are working 18 documents of the Internet Engineering Task Force (IETF), its areas, and 19 its working groups. Note that other groups may also distribute working 20 documents as Internet-Drafts. 22 Internet-Drafts are draft documents valid for a maximum of six months 23 and may be updated, replaced, or obsoleted by other documents at any 24 time. It is inappropriate to use Internet-Drafts as reference material 25 or to cite them other than as "work in progress". 27 The list of current Internet-Drafts can be accessed at 28 http://www.ietf.org/ietf/1id-abstracts.txt 30 The list of Internet-Draft Shadow Directories can be accessed as 31 http://www.ietf.org/shadow.html. 33 Abstract 35 This document specifies additional type3 keyword values for the IPP/1.1 36 "media" Job Template attribute for use with the Internet Printing 37 Protocol/1.1 (IPP). These additional attribute values permit the client 38 to specify additional media options, including values of media common to 39 engineering drawings. For completeness, all of the existing "media" 40 keyword values are included as well. 42 Expires April 8, 2000 43 The full set of IPP documents includes: 45 Design Goals for an Internet Printing Protocol [RFC2567] 46 Rationale for the Structure and Model and Protocol for the Internet 47 Printing Protocol [RFC2568] 48 Internet Printing Protocol/1.1: Model and Semantics [ipp-mod] 49 Internet Printing Protocol/1.1: Encoding and Transport [ipp-pro] 50 Internet Printing Protocol/1.1: Implementer's Guide [ipp-iig] 51 Mapping between LPD and IPP Protocols [RFC2569] 53 The "Design Goals for an Internet Printing Protocol" document takes a 54 broad look at distributed printing functionality, and it enumerates 55 real-life scenarios that help to clarify the features that need to be 56 included in a printing protocol for the Internet. It identifies 57 requirements for three types of users: end users, operators, and 58 administrators. It calls out a subset of end user requirements that are 59 satisfied in IPP/1.0. A few OPTIONAL operator operations have been 60 added to IPP/1.1. 62 The "Rationale for the Structure and Model and Protocol for the Internet 63 Printing Protocol" document describes IPP from a high level view, 64 defines a roadmap for the various documents that form the suite of IPP 65 specification documents, and gives background and rationale for the IETF 66 working group's major decisions. 68 The "Internet Printing Protocol/1.1: Encoding and Transport" document is 69 a formal mapping of the abstract operations and attributes defined in 70 the model document onto HTTP/1.1 [RFC2616]. It defines the encoding 71 rules for a new Internet MIME media type called "application/ipp". This 72 document also defines the rules for transporting over HTTP a message 73 body whose Content-Type is "application/ipp". This document defines a 74 new scheme named 'ipp' for identifying IPP printers and jobs. 76 The "Internet Printing Protocol/1.1: Implementer's Guide" document gives 77 insight and advice to implementers of IPP clients and IPP objects. It 78 is intended to help them understand IPP/1.1 and some of the 79 considerations that may assist them in the design of their client and/or 80 IPP object implementations. For example, a typical order of processing 81 requests is given, including error checking. Motivation for some of the 82 specification decisions is also included. 84 The "Mapping between LPD and IPP Protocols" document gives some advice 85 to implementers of gateways between IPP and LPD (Line Printer Daemon) 86 implementations. 88 Expires April 8, 2000 89 TABLE OF CONTENTS 91 1 Additional values for the "media" Job Template attribute...........4 93 1.1 Problem.........................................................4 95 1.2 Suggested solution..............................................4 97 1.3 Proposed Text...................................................4 99 2 IANA Considerations...............................................23 101 3 Internationalization Considerations...............................23 103 4 Security Considerations...........................................23 105 5 References........................................................23 107 6 Author's Addresses................................................24 109 7 Full Copyright Statement..........................................25 111 Expires April 8, 2000 112 1 Additional values for the "media" Job Template attribute 114 1.1 Problem 116 Need additional type3 keyword values for media to support the additional 117 sizes and types of media common to engineering drawings. 119 1.2 Suggested solution 121 This solution is a new solution to address the unique requirements for 122 the engineering market. The suggestion is to add additional type3 123 keyword values to the "media" Job Template attributes (also applies to 124 "media-default", "media-supported" and "media-ready" attributes). 126 1.3 Proposed Text 128 Add the following paragraphs indicated with revision marks to the 129 description of the "media" Job Template attribute (section 4.2.11), 130 References (section 9), and Appendix C: "media" keyword values (section 131 14), so that the entire sections would be: 133 4.2.11 media (type3 keyword | name(MAX)) 135 This attribute identifies the medium that the Printer uses for all 136 impressions of the Job. 138 The values for "media" include medium-names, medium-sizes, input-trays 139 and electronic forms so that one attribute specifies the media. If a 140 Printer object supports a medium name as a value of this attribute, such 141 a medium name implicitly selects an input-tray that contains the 142 specified medium. If a Printer object supports a medium size as a value 143 of this attribute, such a medium size implicitly selects a medium name 144 that in turn implicitly selects an input-tray that contains the medium 145 with the specified size. If a Printer object supports an input-tray as 146 the value of this attribute, such an input-tray implicitly selects the 147 medium that is in that input-tray at the time the job prints. This case 148 includes manual-feed input-trays. If a Printer object supports an 149 electronic form as the value of this attribute, such an electronic form 150 implicitly selects a medium-name that in turn implicitly selects an 151 input-tray that contains the medium specified by the electronic form. 152 The electronic form also implicitly selects an image that the Printer 153 MUST merge with the document data as its prints each page. 155 Standard keyword values are taken from ISO DPA, the Printer MIB and 156 ASME-Y14.1M and are listed in section 14. An administrator MAY define 158 Expires April 8, 2000 159 additional values using the 'name' or 'keyword' attribute syntax, 160 depending on implementation. 162 There is also an additional Printer attribute named "media-ready" which 163 differs from "media-supported" in that legal values only include the 164 subset of "media-supported" values that are physically loaded and ready 165 for printing with no operator intervention required. If an IPP object 166 supports "media-supported", it NEED NOT support "media-ready". 168 The relationship of this attribute and the other attributes that control 169 document processing is described in section 15.3. 171 The following text includes all of the current Appendix C in [ipp-mod] 172 plus additional values: 174 14. APPENDIX C: "media" keyword values 176 Standard keyword values are taken from several sources. 178 Standard values are defined (taken from DPA[ISO10175] and the Printer 179 MIB[RFC1759]): 181 'default': The default medium for the output device 182 'iso-a4-white': Specifies the ISO A4 white medium: 210 mm x 297 mm 183 'iso-a4-colored': Specifies the ISO A4 colored medium: 210 mm x 297 184 mm 185 'iso-a4-transparent' Specifies the ISO A4 transparent medium: 210 mm 186 x 297 mm 187 'iso-a3-white': Specifies the ISO A3 white medium: 297 mm x 420 mm 188 'iso-a3-colored': Specifies the ISO A3 colored medium: 297 mm x 420 189 mm 190 'iso-a5-white': Specifies the ISO A5 white medium: 148 mm x 210 mm 191 'iso-a5-colored': Specifies the ISO A5 colored medium: 148 mm x 210 192 mm 193 'iso-b4-white': Specifies the ISO B4 white medium: 250 mm x 353 mm 194 'iso-b4-colored': Specifies the ISO B4 colored medium: 250 mm x 353 195 mm 196 'iso-b5-white': Specifies the ISO B5 white medium: 176 mm x 250 mm 197 'iso-b5-colored': Specifies the ISO B5 colored medium: 176 mm x 250 198 mm 199 'jis-b4-white': Specifies the JIS B4 white medium: 257 mm x 364 mm 200 'jis-b4-colored': Specifies the JIS B4 colored medium: 257 mm x 364 201 mm 202 'jis-b5-white': Specifies the JIS B5 white medium: 182 mm x 257 mm 203 'jis-b5-colored': Specifies the JIS B5 colored medium: 182 mm x 257 204 mm 206 The following standard values are defined for North American media: 208 Expires April 8, 2000 209 'na-letter-white': Specifies the North American letter white medium 210 'na-letter-colored': Specifies the North American letter colored 211 medium 212 'na-letter-transparent': Specifies the North American letter 213 transparent medium 214 'na-legal-white': Specifies the North American legal white medium 215 'na-legal-colored': Specifies the North American legal colored medium 217 The following standard values are defined for envelopes: 219 'iso-b4-envelope': Specifies the ISO B4 envelope medium 220 'iso-b5-envelope': Specifies the ISO B5 envelope medium 221 'iso-c3-envelope': Specifies the ISO C3 envelope medium 222 'iso-c4-envelope': Specifies the ISO C4 envelope medium 223 'iso-c5-envelope': Specifies the ISO C5 envelope medium 224 'iso-c6-envelope': Specifies the ISO C6 envelope medium 225 'iso-designated-long-envelope': Specifies the ISO Designated Long 226 envelope medium 227 'na-10x13-envelope': Specifies the North American 10x13 envelope 228 medium 229 'na-9x12-envelope': Specifies the North American 9x12 envelope medium 230 'monarch-envelope': Specifies the Monarch envelope 231 'na-number-10-envelope': Specifies the North American number 10 232 business envelope medium 233 'na-7x9-envelope': Specifies the North American 7x9 inch envelope 234 'na-9x11-envelope': Specifies the North American 9x11 inch envelope 235 'na-10x14-envelope': Specifies the North American 10x14 inch envelope 236 'na-number-9-envelope': Specifies the North American number 9 237 business envelope 238 'na-6x9-envelope': Specifies the North American 6x9 inch envelope 239 'na-10x15-envelope': Specifies the North American 10x15 inch envelope 241 The following standard values are defined for the less commonly used 242 media: 244 'executive-white': Specifies the white executive medium 245 'folio-white': Specifies the folio white medium 246 'invoice-white': Specifies the white invoice medium 247 'ledger-white': Specifies the white ledger medium 248 'quarto-white': Specified the white quarto medium 249 'iso-a0-white': Specifies the ISO A0 white medium: 841 mm x 1189 mm 250 'iso-a0-transparent': Specifies the ISO A0 transparent medium: 841 mm 251 x 1189 mm 252 'iso-a0-translucent': Specifies the ISO A0 translucent medium: 841 mm 253 x 1189 mm 254 'iso-a1-white': Specifies the ISO A1 white medium: 594 mm x 841 mm 255 'iso-a1-transparent': Specifies the ISO A1 transparent medium: 594 mm 256 x 841 mm 257 'iso-a1-translucent': Specifies the ISO A1 translucent medium: 594 mm 258 x 841 mm 260 Expires April 8, 2000 262 'iso-a2-white': Specifies the ISO A2 white medium: 420 mm x 594 mm 263 'iso-a2-transparent': Specifies the ISO A2 transparent medium: 420 mm 264 x 594 mm 265 'iso-a2-translucent': Specifies the ISO A2 translucent medium: 420 mm 266 x 594 mm 267 'iso-a3-transparent': Specifies the ISO A3 transparent medium: 297 mm 268 x 420 mm 269 'iso-a3-translucent': Specifies the ISO A3 translucent medium: 297 mm 270 x 420 mm 271 'iso-a4-translucent': Specifies the ISO A4 translucent medium: 210 mm 272 x 297 mm 273 'iso-a5-transparent': Specifies the ISO A5 transparent medium: 148 mm 274 x 210 mm 275 'iso-a5-translucent': Specifies the ISO A5 translucent medium: 148 mm 276 x 210 mm 277 'iso-a6-white': Specifies the ISO A6 white medium: 105 mm x 148 mm 278 'iso-a7-white': Specifies the ISO A7 white medium: 74 mm x 105 mm 279 'iso-a8-white': Specifies the ISO A8 white medium: 52 mm x 74 mm 280 'iso-a9-white': Specifies the ISO A9 white medium: 37 mm x 52 mm 281 'iso-10-white': Specifies the ISO A10 white medium: 26 mm x 37 mm 282 'iso-b0-white': Specifies the ISO B0 white medium: 1000 mm x 1414 mm 283 'iso-b1-white': Specifies the ISO B1 white medium: 707 mm x 1000 mm 284 'iso-b2-white': Specifies the ISO B2 white medium: 500 mm x 707 mm 285 'iso-b3-white': Specifies the ISO B3 white medium: 353 mm x 500 mm 286 'iso-b6-white': Specifies the ISO B6 white medium: 125 mm x 176 mm 287 'iso-b7-white': Specifies the ISO B7 white medium: 88 mm x 125 mm 288 'iso-b8-white': Specifies the ISO B8 white medium: 62 mm x 88 mm 289 'iso-b9-white': Specifies the ISO B9 white medium: 44 mm x 62 mm 290 'iso-b10-white': Specifies the ISO B10 white medium: 31 mm x 44 mm 291 'jis-b0-white': Specifies the JIS B0 white medium: 1030 mm x 1456 mm 292 'jis-b0-transparent': Specifies the JIS B0 transparent medium: 1030 293 mm x 1456 mm 294 'jis-b0-translucent': Specifies the JIS B0 translucent medium: 1030 295 mm x 1456 mm 296 'jis-b1-white': Specifies the JIS B1 white medium: 728 mm x 1030 mm 297 'jis-b1-transparent': Specifies the JIS B1 transparent medium: 728 mm 298 x 1030 mm 299 'jis-b1-translucent': Specifies the JIS B1 translucent medium: 728 mm 300 x 1030 mm 301 'jis-b2-white': Specifies the JIS B2 white medium: 515 mm x 728 mm 302 'jis-b2-transparent': Specifies the JIS B2 transparent medium: 515 mm 303 x 728 mm 304 'jis-b2-translucent': Specifies the JIS B2 translucent medium: 515 mm 305 x 728 mm 306 'jis-b3-white': Specifies the JIS B3 white medium: 364 mm x 515 mm 307 'jis-b3-transparent': Specifies the JIS B3 transparent medium: 364 mm 308 x 515 mm 309 'jis-b3-translucent': Specifies the JIS B3 translucent medium: 364 mm 310 x 515 mm 311 'jis-b4-transparent': Specifies the JIS B4 transparent medium: 257 mm 312 x 364 mm 313 'jis-b4-translucent': Specifies the JIS B4 translucent medium: 257 mm 314 x 364 mm 316 Expires April 8, 2000 318 'jis-b5-transparent': Specifies the JIS B5 transparent medium: 182 mm 319 x 257 mm 320 'jis-b5-translucent': Specifies the JIS B5 translucent medium: 182 mm 321 x 257 mm 322 'jis-b6-white': Specifies the JIS B6 white medium: 128 mm x 182 mm 323 'jis-b7-white': Specifies the JIS B7 white medium: 91 mm x 128 mm 324 'jis-b8-white': Specifies the JIS B8 white medium: 64 mm x 91 mm 325 'jis-b9-white': Specifies the JIS B9 white medium: 45 mm x 64 mm 326 'jis-b10-white': Specifies the JIS B10 white medium: 32 mm x 45 mm 328 The following standard values are defined for American Standard (i.e. 329 ANSI) engineering media: 331 'a-white': Specifies the engineering ANSI A size white medium: 8.5 332 inches x 11 inches 333 'a-transparent': Specifies the engineering ANSI A size transparent 334 medium: 8.5 inches x 11 inches 335 'a-translucent': Specifies the engineering ANSI A size translucent 336 medium: 8.5 inches x 11 inches 337 'b-white': Specifies the engineering ANSI B size white medium: 11 338 inches x 17 inches 339 'b-transparent': Specifies the engineering ANSI B size transparent 340 medium: 11 inches x 17 inches) 341 'b-translucent': Specifies the engineering ANSI B size translucent 342 medium: 11 inches x 17 inches 343 'c-white': Specifies the engineering ANSI C size white medium: 17 344 inches x 22 inches 345 'c-transparent': Specifies the engineering ANSI C size transparent 346 medium: 17 inches x 22 inches 347 'c-translucent': Specifies the engineering ANSI C size translucent 348 medium: 17 inches x 22 inches 349 'd-white': Specifies the engineering ANSI D size white medium: 22 350 inches x 34 inches 351 'd-transparent': Specifies the engineering ANSI D size transparent 352 medium: 22 inches x 34 inches 353 'd-translucent': Specifies the engineering ANSI D size translucent 354 medium: 22 inches x 34 inches 355 'e-white': Specifies the engineering ANSI E size white medium: 34 356 inches x 44 inches 357 'e-transparent': Specifies the engineering ANSI E size transparent 358 medium: 34 inches x 44 inches 359 'e-translucent': Specifies the engineering ANSI E size translucent 360 medium: 34 inches x 44 inches 362 The following standard values are defined for American Standard (i.e. 363 ANSI) engineering media for devices that provide the "synchro-cut" 364 feature (see section 14.1): 366 'axsynchro-white': Specifies the roll paper having the width of the 367 longer edge (11 inches) of the engineering ANSI A size white 368 medium and cuts synchronizing with data. 370 Expires April 8, 2000 372 'axsynchro-transparent': Specifies the roll paper having the width of 373 the longer edge (11 inches) of the engineering ANSI A size 374 transparent medium and cuts synchronizing with data. 375 'axsynchro-translucent': Specifies the roll paper having the width of 376 the longer edge (11 inches) of the engineering ANSI A size 377 translucent medium and cuts synchronizing with data. 378 'bxsynchro-white': Specifies the roll paper having the width of the 379 longer edge (17 inches) of the engineering ANSI B size white 380 medium and cuts synchronizing with data. 381 'bxsynchro-transparent': Specifies the roll paper having the width of 382 the longer edge (17 inches) of the engineering ANSI B size 383 transparent medium and cuts synchronizing with data. 384 'bxsynchro-translucent': Specifies the roll paper having the width of 385 the longer edge (17 inches) of the engineering ANSI B size 386 translucent medium and cuts synchronizing with data. 387 'cxsynchro-white': Specifies the roll paper having the width of the 388 longer edge (22 inches) of the engineering ANSI C size white 389 medium and cuts synchronizing with data. 390 'cxsynchro-transparent': Specifies the roll paper having the width of 391 the longer edge (22 inches) of the engineering ANSI C size 392 transparent medium and cuts synchronizing with data. 393 'cxsynchro-translucent': Specifies the roll paper having the width of 394 the longer edge (22 inches) of the engineering ANSI C size 395 translucent medium and cuts synchronizing with data. 396 'dxsynchro-white': Specifies the roll paper having the width of the 397 longer edge (34 inches) of the engineering ANSI D size white 398 medium and cuts synchronizing with data. 399 'dxsynchro-transparent': Specifies the roll paper having the width of 400 the longer edge (34 inches) of the engineering ANSI D size 401 transparent medium and cuts synchronizing with data. 402 'dxsynchro-translucent': Specifies the roll paper having the width of 403 the longer edge (34 inches) of the engineering ANSI D size 404 translucent medium and cuts synchronizing with data. 405 'exsynchro-white': Specifies the roll paper having the width of the 406 longer edge (44 inches) of the engineering ANSI E size white 407 medium and cuts synchronizing with data. 408 'exsynchro-transparent': Specifies the roll paper having the width of 409 the longer edge (44 inches) of the engineering ANSI E size 410 transparent medium and cuts synchronizing with data. 411 'exsynchro-translucent': Specifies the roll paper having the width of 412 the longer edge (44 inches) of the engineering ANSI E size 413 translucent medium and cuts synchronizing with data. 415 The following standard values are defined for American Architectural 416 engineering media: 418 'arch-a-white': Specifies the Architectural A size white medium: 9 419 inches x 12 inches 420 'arch-a-transparent': Specifies the Architectural A size transparent 421 medium: 9 inches x 12 inches 422 'arch-a-translucent': Specifies the Architectural A size translucent 423 medium: 9 inches x 12 inches 425 Expires April 8, 2000 427 'arch-b-white': Specifies the Architectural B size white medium: 12 428 inches x 18 inches 429 'arch-b-transparent': Specifies the Architectural B size transparent 430 medium: 12 inches x 18 inches 431 'arch-b-translucent': Specifies the Architectural B size translucent 432 medium: 12 inches x 18 inches 433 'arch-c-white': Specifies the Architectural C size white medium: 18 434 inches x 24 inches 435 'arch-c-transparent': Specifies the Architectural C size transparent 436 medium: 18 inches x 24 inches 437 'arch-c-translucent': Specifies the Architectural C size translucent 438 medium: 18 inches x 24 inches 439 'arch-d-white': Specifies the Architectural D size white medium: 24 440 inches x 36 inches 441 'arch-d-transparent': Specifies the Architectural D size transparent 442 medium: 24 inches x 36 inches 443 'arch-d-translucent': Specifies the Architectural D size translucent 444 medium: 24 inches x 36 inches 445 'arch-e-white': Specifies the Architectural E size white medium: 36 446 inches x 48 inches 447 'arch-e-transparent': Specifies the Architectural E size transparent 448 medium: 36 inches x 48 inches 449 'arch-e-translucent': Specifies the Architectural E size translucent 450 medium: 36 inches x 48 inches 452 The following standard values are defined for American Architectural 453 engineering media for devices that provide the "synchro-cut" feature 454 (see section 14.1): 456 'arch-axsynchro-white': Specifies the roll paper having the width of 457 the longer edge (12 inches) of the Architectural A size white 458 medium and cuts synchronizing with data. 459 'arch-axsynchro-transparent': Specifies Specifies the roll paper 460 having the width of the longer edge (12 inches) of the 461 Architectural A size transparent medium and cuts synchronizing 462 with data. 463 'arch-axsynchro-translucent': Specifies Specifies the roll paper 464 having the width of the longer edge (12 inches) of the 465 Architectural A size translucent medium and cuts synchronizing 466 with data. 467 'arch-bxsynchro-white': Specifies the roll paper having the width of 468 the longer edge (18 inches) of the Architectural B size white 469 medium and cuts synchronizing with data. 470 'arch-bxsynchro-transparent': Specifies the roll paper having the 471 width of the longer edge (18 inches) of the Architectural B size 472 transparent medium and cuts synchronizing with data. 473 'arch-bxsynchro-translucent': Specifies the roll paper having the 474 width of the longer edge (18 inches) of the Architectural B size 475 translucent medium and cuts synchronizing with data. 476 'arch-cxsynchro-white': Specifies the roll paper having the width of 477 the longer edge (24 inches) of the Architectural C size white 478 medium and cuts synchronizing with data. 480 Expires April 8, 2000 482 'arch-cxsynchro-transparent': Specifies the roll paper having the 483 width of the longer edge (24 inches) of the Architectural C size 484 transparent medium and cuts synchronizing with data. 485 'arch-cxsynchro-translucent': Specifies the roll paper having the 486 width of the longer edge (24 inches) of the Architectural C size 487 translucent medium and cuts synchronizing with data. 488 'arch-dxsynchro-white': Specifies the roll paper having the width of 489 the longer edge (36 inches) of the Architectural D size white 490 medium and cuts synchronizing with data. 491 'arch-dxsynchro-transparent': Specifies the roll paper having the 492 width of the longer edge (36 inches) of the Architectural D size 493 transparent medium and cuts synchronizing with data. 494 'arch-dxsynchro-translucent': Specifies the roll paper having the 495 width of the longer edge (36 inches) of the Architectural D size 496 translucent medium and cuts synchronizing with data. 497 'arch-exsynchro-white': Specifies the roll paper having the width of 498 the longer edge (48 inches) of the Architectural E size white 499 medium and cuts synchronizing with data. 500 'arch-exsynchro-transparent': Specifies the roll paper having the 501 width of the longer edge (48 inches) of the Architectural E size 502 transparent medium and cuts synchronizing with data. 503 'arch-exsynchro-translucent': Specifies the roll paper having the 504 width of the longer edge (48 inches) of the Architectural E size 505 translucent medium and cuts synchronizing with data. 507 The following standard values are defined for Japanese and European 508 Standard (i.e. ISO) engineering media, which are of a long fixed size 509 [ASME-Y14.1M]: 511 'iso-a1x3-white': Specifies the ISO A1X3 white medium having the 512 width of the longer edge (841 mm) of the ISO A1 medium 513 'iso-a1x3-transparent': Specifies the ISO A1X3 transparent medium 514 having the width of the longer edge (841 mm) of the ISO A1 515 medium 516 'iso-a1x3-translucent': Specifies the ISO A1X3 translucent medium 517 having the width of the longer edge (841 mm) of the ISO A1 518 medium 519 'iso-a1x4-white': Specifies the ISO A1X4 white medium having the 520 width of the longer edge (841 mm) of the ISO A1 medium 521 'iso-a1x4-transparent': Specifies the ISO A1X4 transparent medium 522 having the width of the longer edge (841 mm) of the ISO A1 523 medium 524 'iso-a1x4- translucent': Specifies the ISO A1X4 translucent medium 525 having the width of the longer edge (841 mm) of the ISO A1 526 medium 527 'iso-a2x3-white': Specifies the ISO A2X3 white medium having the 528 width of the longer edge (594 mm) of the ISO A2 medium 529 'iso-a2x3-transparent': Specifies the ISO A2X3 transparent medium 530 having the width of the longer edge (594 mm) of the ISO A2 531 medium 532 'iso-a2x3-translucent': Specifies the ISO A2X3 translucent medium 533 having the width of the longer edge (594 mm) of the ISO A2 534 medium 536 Expires April 8, 2000 538 'iso-a2x4-white': Specifies the ISO A2X4 white medium having the 539 width of the longer edge (594 mm) of the ISO A2 medium 540 'iso-a2x4-transparent': Specifies the ISO A2X4 transparent medium 541 having the width of the longer edge (594 mm) of the ISO A2 542 medium 543 'iso-a2x4-translucent': Specifies the ISO A2X4 translucent medium 544 having the width of the longer edge (594 mm) of the ISO A2 545 medium 546 'iso-a2x5-white': Specifies the ISO A2X5 white medium having the 547 width of the longer edge (594 mm) of the ISO A2 medium 548 'iso-a2x5-transparent': Specifies the ISO A2X5 transparent medium 549 having the width of the longer edge (594 mm) of the ISO A2 550 medium 551 'iso-a2x5-translucent': Specifies the ISO A2X5 translucent medium 552 having the width of the longer edge (594 mm) of the ISO A2 553 medium 554 'iso-a3x3-white': Specifies the ISO A3X3 white medium having the 555 width of the longer edge (420 mm) of the ISO A3 medium 556 'iso-a3x3-transparent': Specifies the ISO A3X3 transparent medium 557 having the width of the longer edge (420 mm) of the ISO A3 558 medium 559 'iso-a3x3-translucent': Specifies the ISO A3X3 translucent medium 560 having the width of the longer edge (420 mm) of the ISO A3 561 medium 562 'iso-a3x4-white': Specifies the ISO A3X4 white medium having the 563 width of the longer edge (420 mm) of the ISO A3 medium 564 'iso-a3x4-transparent': Specifies the ISO A3X4 transparent medium 565 having the width of the longer edge (420 mm) of the ISO A3 566 medium 567 'iso-a3x4-translucent': Specifies the ISO A3X4 translucent medium 568 having the width of the longer edge (420 mm) of the ISO A3 569 medium 570 'iso-a3x5-white': Specifies the ISO A3X5 white medium having the 571 width of the longer edge (420 mm) of the ISO A3 medium 572 'iso-a3x5-transparent': Specifies the ISO A3X5 transparent medium 573 having the width of the longer edge (420 mm) of the ISO A3 574 medium 575 'iso-a3x5-translucent': Specifies the ISO A3X5 translucent medium 576 having the width of the longer edge (420 mm) of the ISO A3 577 medium 578 'iso-a3x6-white': Specifies the ISO A3X6 white medium having the 579 width of the longer edge (420 mm) of the ISO A3 medium 580 'iso-a3x6-transparent': Specifies the ISO A3X6 transparent medium 581 having the width of the longer edge (420 mm) of the ISO A3 582 medium 583 'iso-a3x6-translucent': Specifies the ISO A3X6 translucent medium 584 having the width of the longer edge (420 mm) of the ISO A3 585 medium 586 'iso-a3x7-white': Specifies the ISO A3X7 white medium having the 587 width of the longer edge (420 mm) of the ISO A3 medium 588 'iso-a3x7-transparent': Specifies the ISO A3X7 transparent medium 589 having the width of the longer edge (420 mm) of the ISO A3 590 medium 592 Expires April 8, 2000 594 'iso-a3x7-translucent'': Specifies the ISO A3X7 translucent' medium 595 having the width of the longer edge (420 mm) of the ISO A3 596 medium 597 'iso-a4x3-white': Specifies the ISO A4X3 white medium having the 598 width of the longer edge (297 mm) of the ISO A4 medium 599 'iso-a4x3-transparent': Specifies the ISO A4X3 transparent medium 600 having the width of the longer edge (297 mm) of the ISO A4 601 medium 602 'iso-a4x3-translucent'': Specifies the ISO A4X3 translucent' medium 603 having the width of the longer edge (297 mm) of the ISO A4 604 medium 605 'iso-a4x4-white': Specifies the ISO A4X4 white medium having the 606 width of the longer edge (297 mm) of the ISO A4 medium 607 'iso-a4x4-transparent': Specifies the ISO A4X4 transparent medium 608 having the width of the longer edge (297 mm) of the ISO A4 609 medium 610 'iso-a4x4-translucent': Specifies the ISO A4X4 translucent medium 611 having the width of the longer edge (297 mm) of the ISO A4 612 medium 613 'iso-a4x5-white': Specifies the ISO A4X5 white medium having the 614 width of the longer edge (297 mm) of the ISO A4 medium 615 'iso-a4x5-transparent': Specifies the ISO A4X5 transparent medium 616 having the width of the longer edge (297 mm) of the ISO A4 617 medium 618 'iso-a4x5-translucent': Specifies the ISO A4X5 translucent medium 619 having the width of the longer edge (297 mm) of the ISO A4 620 medium 621 'iso-a4x6-white': Specifies the ISO A4X6 white medium having the 622 width of the longer edge (297 mm) of the ISO A4 medium 623 'iso-a4x6-transparent': Specifies the ISO A4X6 transparent medium 624 having the width of the longer edge (297 mm) of the ISO A4 625 medium 626 'iso-a4x6-translucent': Specifies the ISO A4X6 translucent medium 627 having the width of the longer edge (297 mm) of the ISO A4 628 medium 629 'iso-a4x7-white': Specifies the ISO A4X7 white medium having the 630 width of the longer edge (297 mm) of the ISO A4 medium 631 'iso-a4x7-transparent': Specifies the ISO A4X7 transparent medium 632 having the width of the longer edge (297 mm) of the ISO A4 633 medium 634 'iso-a4x7-translucent': Specifies the ISO A4X7 translucent medium 635 having the width of the longer edge (297 mm) of the ISO A4 636 medium 637 'iso-a4x8-white': Specifies the ISO A4X8 white medium having the 638 width of the longer edge (297 mm) of the ISO A4 medium 639 'iso-a4x8-transparent': Specifies the ISO A4X8 transparent medium 640 having the width of the longer edge (297 mm) of the ISO A4 641 medium 642 'iso-a4x8-translucent': Specifies the ISO A4X8 translucent medium 643 having the width of the longer edge (297 mm) of the ISO A4 644 medium 645 'iso-a4x9-white': Specifies the ISO A4X9 white medium having the 646 width of the longer edge (297 mm) of the ISO A4 medium 648 Expires April 8, 2000 650 'iso-a4x9-transparent': Specifies the ISO A4X9 transparent medium 651 having the width of the longer edge (297 mm) of the ISO A4 652 medium 653 'iso-a4x9-translucent': Specifies the ISO A4X9 translucent medium 654 having the width of the longer edge (297 mm) of the ISO A4 655 medium 657 The following standard values are defined for Japanese and European 658 Standard (i.e. ISO) engineering media, which are either a long fixed 659 size [ASME-Y14.1M] or roll feed, for devices that provide the "synchro- 660 cut" feature (see section 14.1): 662 'iso-a0xsynchro-white': Specifies the paper having the width of the 663 longer edge (1189 mm) of the ISO A0 white medium and cuts 664 synchronizing with data. 665 'iso-a0xsynchro-transparent': Specifies the paper having the width of 666 the longer edge (1189 mm) of the ISO A0 transparent medium and 667 cuts synchronizing with data. 668 'iso-a0xsynchro-translucent': Specifies the paper having the width of 669 the longer edge (1189 mm) of the ISO A0 translucent medium and 670 cuts synchronizing with data. 671 'iso-a1xsynchro-white': Specifies the paper having the width of the 672 longer edge (841 mm) of the ISO A1 white medium and cuts 673 synchronizing with data. 674 'iso-a1xsynchro-transparent': Specifies the paper having the width of 675 the longer edge (841 mm) of the ISO A1 transparent medium and 676 cuts synchronizing with data. 677 'iso-a1xsynchro-translucent': Specifies the paper having the width of 678 the longer edge (841 mm) of the ISO A1 translucent medium and 679 cuts synchronizing with data. 680 'iso-a2xsynchro-white': Specifies the paper having the width of the 681 longer edge (594 mm) of the ISO A2 white medium and cuts 682 synchronizing with data. 683 'iso-a2xsynchro-transparent': Specifies the paper having the width of 684 the longer edge (594 mm) of the ISO A2 transparent medium and 685 cuts synchronizing with data. 686 'iso-a2xsynchro-translucent': Specifies the paper having the width of 687 the longer edge (594 mm) of the ISO A2 translucent medium and 688 cuts synchronizing with data. 689 'iso-a3xsynchro-white': Specifies the paper having the width of the 690 longer edge (420 mm) of the ISO A3 white medium and cuts 691 synchronizing with data. 692 'iso-a3xsynchro-transparent': Specifies the paper having the width of 693 the longer edge (420 mm) of the ISO A3 transparent medium and 694 cuts synchronizing with data. 695 'iso-a3xsynchro-translucent': Specifies the paper having the width of 696 the longer edge (420 mm) of the ISO A3 translucent medium and 697 cuts synchronizing with data. 698 'iso-a4xsynchro-white': Specifies the paper having the width of the 699 longer edge (297 mm) of the ISO A4 white medium and cuts 700 synchronizing with data. 702 Expires April 8, 2000 704 'iso-a4xsynchro-transparent': Specifies the paper having the width of 705 the longer edge (297 mm) of the ISO A4 transparent medium and 706 cuts synchronizing with data. 707 'iso-a4xsynchro-translucent': Specifies the paper having the width of 708 the longer edge (297 mm) of the ISO A4 transparent medium and 709 cuts synchronizing with data. 711 The following standard values are defined for American Standard (i.e. 712 ANSI) engineering media, American Architectural engineering media, and 713 Japanese and European Standard (i.e. ISO) engineering media, which are 714 either a long fixed size [ASME-Y14.1M] or roll feed, for devices that 715 provide the "synchro-cut" feature and/or the "auto-select" feature (see 716 section 14.1): 718 'auto-white': Specifies that the printer selects the white medium 719 with the appropriate fixed size (e.g. a1, a2, etc.) or data- 720 synchro size, and the selection is implementation-defined. 721 'auto-transparent': Specifies that the printer selects the 722 transparent medium with the appropriate fixed size (e.g. a1, a2, 723 etc.) or data-synchro size, and the selection is implementation- 724 defined. 725 'auto-translucent': Specifies that the printer selects the 726 translucent medium with the appropriate fixed size (e.g. a1, a2, 727 etc.) or data-synchro size, and the selection is implementation- 728 defined. 729 'auto-fixed-size-white': Specifies that the printer selects the white 730 medium with the appropriate fixed size (e.g. a1, a2, etc.) or 731 the appropriate long fixed size listed above. 732 'auto-fixed-size-transparent': Specifies that the printer selects the 733 transparent medium with the appropriate fixed size (e.g. a1, a2, 734 etc.) or the appropriate long fixed size listed above. 735 'auto-fixed-size-translucent': Specifies that the printer selects the 736 translucent medium with the appropriate fixed size (e.g. a1, a2, 737 etc.) or the appropriate long fixed size listed above. 738 'auto-synchro-white': Specifies that the printer selects the white 739 paper with the appropriate width and cuts it synchronizing with 740 data. 741 'auto-synchro-transparent': Specifies that the printer selects the 742 transparent paper with the appropriate width and cuts it 743 synchronizing with data. 744 'auto-synchro-translucent': Specifies that the printer selects the 745 translucent paper with the appropriate width and cuts it 746 synchronizing with data. 748 The following standard values are defined for input-trays (from ISO DPA 749 and the Printer MIB): 751 'top': The top input tray in the printer. 752 'middle': The middle input tray in the printer. 753 'bottom': The bottom input tray in the printer. 754 'envelope': The envelope input tray in the printer. 756 Expires April 8, 2000 757 'manual': The manual feed input tray in the printer. 758 'large-capacity': The large capacity input tray in the printer. 759 'main': The main input tray 760 'side': The side input tray 762 The following standard values are defined for media sizes (from ISO 763 DPA): 765 'iso-a0': Specifies the ISO A0 size: 841 mm by 1189 mm as defined in 766 ISO 216 767 'iso-a1': Specifies the ISO A1 size: 594 mm by 841 mm as defined in 768 ISO 216 769 'iso-a2': Specifies the ISO A2 size: 420 mm by 594 mm as defined in 770 ISO 216 771 'iso-a3': Specifies the ISO A3 size: 297 mm by 420 mm as defined in 772 ISO 216 773 'iso-a4': Specifies the ISO A4 size: 210 mm by 297 mm as defined in 774 ISO 216 775 'iso-a5': Specifies the ISO A5 size: 148 mm by 210 mm as defined in 776 ISO 216 777 'iso-a6': Specifies the ISO A6 size: 105 mm by 148 mm as defined in 778 ISO 216 779 'iso-a7': Specifies the ISO A7 size: 74 mm by 105 mm as defined in 780 ISO 216 781 'iso-a8': Specifies the ISO A8 size: 52 mm by 74 mm as defined in ISO 782 216 783 'iso-a9': Specifies the ISO A9 size: 37 mm by 52 mm as defined in ISO 784 216 785 'iso-a10': Specifies the ISO A10 size: 26 mm by 37 mm as defined in 786 ISO 216 787 'iso-b0': Specifies the ISO B0 size: 1000 mm by 1414 mm as defined in 788 ISO 216 789 'iso-b1': Specifies the ISO B1 size: 707 mm by 1000 mm as defined in 790 ISO 216 791 'iso-b2': Specifies the ISO B2 size: 500 mm by 707 mm as defined in 792 ISO 216 793 'iso-b3': Specifies the ISO B3 size: 353 mm by 500 mm as defined in 794 ISO 216 795 'iso-b4': Specifies the ISO B4 size: 250 mm by 353 mm as defined in 796 ISO 216 797 'iso-b5': Specifies the ISO B5 size: 176 mm by 250 mm as defined in 798 ISO 216 799 'iso-b6': Specifies the ISO B6 size: 125 mm by 176 mm as defined in 800 ISO 216 801 'iso-b7': Specifies the ISO B7 size: 88 mm by 125 mm as defined in 802 ISO 216 803 'iso-b8': Specifies the ISO B8 size: 62 mm by 88 mm as defined in ISO 804 216 805 'iso-b9': Specifies the ISO B9 size: 44 mm by 62 mm as defined in ISO 806 216 807 'iso-b10': Specifies the ISO B10 size: 31 mm by 44 mm as defined in 808 ISO 216 810 Expires April 8, 2000 812 'na-letter': Specifies the North American letter size: 8.5 inches by 813 11 inches 814 'na-legal': Specifies the North American legal size: 8.5 inches by 14 815 inches 816 'executive': Specifies the executive size (7.25 X 10.5 in) 817 'folio': Specifies the folio size (8.5 X 13 in) 818 'invoice': Specifies the invoice size (5.5 X 8.5 in) 819 'ledger': Specifies the ledger size (11 X 17 in) 820 'quarto': Specifies the quarto size (8.5 X 10.83 in) 821 'iso-c3': Specifies the ISO C3 size: 324 mm by 458 mm as defined in 822 ISO 269 823 'iso-c4': Specifies the ISO C4 size: 229 mm by 324 mm as defined in 824 ISO 269 825 'iso-c5': Specifies the ISO C5 size: 162 mm by 229 mm as defined in 826 ISO 269 827 'iso-c6': Specifies the ISO C6 size: 114 mm by 162 mm as defined in 828 ISO 269 829 'iso-designated-long': Specifies the ISO Designated Long size: 110 mm 830 by 220 mm as defined in ISO 269 831 'na-10x13-envelope': Specifies the North American 10x13 size: 10 832 inches by 13 inches 833 'na-9x12-envelope': Specifies the North American 9x12 size: 9 inches 834 by 12 inches 835 'na-number-10-envelope': Specifies the North American number 10 836 business envelope size: 4.125 inches by 9.5 inches 837 'na-7x9-envelope': Specifies the North American 7x9 inch envelope 838 size 839 'na-9x11-envelope': Specifies the North American 9x11 inch envelope 840 size 841 'na-10x14-envelope': Specifies the North American 10x14 inch envelope 842 size 843 'na-number-9-envelope': Specifies the North American number 9 844 business envelope size 845 'na-6x9-envelope': Specifies the North American 6x9 envelope size 846 'na-10x15-envelope': Specifies the North American 10x15 envelope size 847 'monarch-envelope': Specifies the Monarch envelope size (3.87 x 7.5 848 in) 849 'jis-b0': Specifies the JIS B0 size: 1030mm x 1456mm 850 'jis-b1': Specifies the JIS B1 size: 728mm x 1030mm 851 'jis-b2': Specifies the JIS B2 size: 515mm x 728mm 852 'jis-b3': Specifies the JIS B3 size: 364mm x 515mm 853 'jis-b4': Specifies the JIS B4 size: 257mm x 364mm 854 'jis-b5': Specifies the JIS B5 size: 182mm x 257mm 855 'jis-b6': Specifies the JIS B6 size: 128mm x 182mm 856 'jis-b7': Specifies the JIS B7 size: 91mm x 128mm 857 'jis-b8': Specifies the JIS B8 size: 64mm x 91mm 858 'jis-b9': Specifies the JIS B9 size: 45mm x 64mm 859 'jis-b10': Specifies the JIS B10 size: 32mm x 45mm 861 The following standard values are defined for American Standard (i.e. 862 ANSI) engineering media sizes: 864 'a': Specifies the engineering ANSI A size medium: 8.5 inches x 11 865 inches 867 Expires April 8, 2000 869 'b': Specifies the engineering ANSI B size medium: 11 inches x 17 870 inches 871 'c': Specifies the engineering ANSI C size medium: 17 inches x 22 872 inches 873 'd': Specifies the engineering ANSI D size medium: 22 inches x 34 874 inches 875 'e': Specifies the engineering ANSI E size medium: 34 inches x 44 876 inches 878 The following standard values are defined for American Architectural 879 engineering media sizes: 881 'arch-a': Specifies the Architectural A size medium: 9 inches x 12 882 inches 883 'arch-b': Specifies the Architectural B size medium: 12 inches x 18 884 inches 885 'arch-c': Specifies the Architectural C size medium: 18 inches x 24 886 inches 887 'arch-d': Specifies the Architectural D size medium: 24 inches x 36 888 inches 889 'arch-e': Specifies the Architectural E size medium: 36 inches x 48 890 inches 892 Expires April 8, 2000 894 14.1.Examples 896 Below are examples to supplement the engineering media value 897 definitions. 899 Example 1: "Synchro-Cut", a device cutting the roll paper in 900 synchronization with the data 902 data height: A1 height 903 data width (shaded): A1 width < data width < (A1 width) x 2 904 specified value: 'iso-a1xsynchro-white' 906 | | 907 |<--- data width --->| 908 | | 909 | | | | 910 |<- A1 width ->|<- A1 width ->| 911 | | | | 912 cross ^ | | | | 913 feed | +--------------------------------------------/ 914 direction | |//////////////|/////| | ^ / 915 | |//////////////|/////| | | / 916 | |//////////////|/////| | | / 917 | |//////////////|/////| | | \ 918 <-----------+- |//////////////|/////| | A1 \ roll 919 feed | |//////////////|/////| | height \ paper 920 direction |//////////////|/////| | | \ 921 |//////////////|/////| | | / 922 |//////////////|/////| | v / 923 +------------------------------------------/ 924 | 925 | 926 |<------ CUT HERE (to synchronize 927 | with data width) 928 | 930 Expires April 8, 2000 932 Example 2: "Auto-Cut", a device cutting the roll paper at multiples of 933 fixed-size media width 935 data height: A1 height 936 data width (shaded): A1 width < data width < (A1 width) x 2 937 specified value: 'auto-fixed-size-white' 939 | | 940 |<--- data width --->| 941 | | 942 | | | | 943 |<- A1 width ->|<- A1 width ->| 944 | | | | 945 cross ^ | | | | 946 feed | +--------------------------------------------/ 947 direction | |//////////////|/////| | ^ / 948 | |//////////////|/////| | | / 949 | |//////////////|/////| | | / 950 | |//////////////|/////| | | \ 951 <-----------+- |//////////////|/////| | A1 \ roll 952 feed | |//////////////|/////| | height \ paper 953 direction |//////////////|/////| | | \ 954 |//////////////|/////| | | / 955 |//////////////|/////| | v / 956 +------------------------------------------/ 957 | 958 | 959 |<--- CUT HERE 960 | (to synchronize 961 | with data width) 963 Expires April 8, 2000 965 Example 3: the 'iso-a4x4-white' fixed size paper 967 paper height: A4 height 968 paper width: (A4 width) x 4 969 specified value: 'iso-a4x4-white' 971 | | | | | 972 |<- A4 width ->|<- A4 width ->|<- A4 width ->|<- A4 width ->| 973 | | | | | 974 | | | | | 975 +-----------------------------------------------------------+ 976 | ^ | | | | 977 | | | | | | 978 | | | | | | 979 | A4 | | | | 980 | height | | | | 981 | | | | | | 982 | | | | | | 983 | | | | | | 984 | v | | | | 985 +-----------------------------------------------------------+ 987 Expires April 8, 2000 988 Example 4: "Synchro-Cut", a device cutting the fixed size paper in 989 synchronization with the data 991 data height: A4 height 992 data width (shaded): (A4 width) x 2 < data width < (A4 width) x 3 993 specified value: 'iso-a4xsynchro-white' 995 | | 996 |<---------- data width ----------->| 997 | | 998 | | | | | 999 |<- A4 width ->|<- A4 width ->|<- A4 width ->| 1000 | | | | | 1001 cross ^ | | | | | 1002 feed | +--------------------------------------------+ 1003 direction | |//////////////|//////////////|/////| ^ | 1004 | |//////////////|//////////////|/////| | | 1005 | |//////////////|//////////////|/////| | | 1006 | |//////////////|//////////////|/////| | | 1007 <-----------+- |//////////////|//////////////|/////| A4 | 1008 feed | |//////////////|//////////////|/////| height | 1009 direction |//////////////|//////////////|/////| | | 1010 |//////////////|//////////////|/////| | | 1011 |//////////////|//////////////|/////| v | 1012 +--------------------------------------------+ 1013 | 1014 CUT HERE ---->| 1015 (to synchronize | 1016 with data width) | 1018 Expires April 8, 2000 1020 2 IANA Considerations 1022 These "media" type3 keyword attribute values will be published by IANA 1023 according to the procedures in RFC 2566 [rfc2566] section 6.1 with the 1024 following URL: 1026 ftp.isi.edu/iana/assignments/ipp/attribute- 1027 values/media/engineering.txt 1029 3 Internationalization Considerations 1031 Normally a client will provide localization of the keywords values of 1032 this attribute to the language of the user. On the other hand, the 1033 client will not localize any name values for the "media" attribute 1034 defined by the system administrator of the IPP Printer (see [ipp-mod] 1035 section 4.1.2 and 4.1.3). 1037 4 Security Considerations 1039 This extension poses no additional security threats or burdens than 1040 those in IPP/1.0 [RFC2566, RFC2565] and IPP/1.1 [ipp-mod, ipp-pro]. 1041 However, implementations MAY support different access control to various 1042 media, depending on the identity of the job submitting user. 1044 5 References 1046 [ASME-Y14.1M] 1047 Metric Drawing Sheet Size and Format, ASME Y14.1M-1995. This 1048 standard defines metric sheet sizes and formats for engineering 1049 drawings. 1051 [ipp-iig] 1052 Hastings, T., Manros, C., "Internet Printing Protocol/1.1: , work in progress, 1054 September 27, 1999. 1056 [ipp-mod] 1057 R. deBry, T. Hastings, R. Herriot, S. Isaacson, P. Powell, 1058 "Internet Printing Protocol/1.1: Model and Semantics", , work in progress, June 1999. 1061 Expires April 8, 2000 1063 [ipp-pro] 1064 Herriot, R., Butler, S., Moore, P., Tuner, R., "Internet Printing 1065 Protocol/1.1: Encoding and Transport", , work in progress, June 1999. 1068 [RFC2565] 1069 Herriot, R., Butler, S., Moore, P., Tuner, R., "Internet Printing 1070 Protocol/1.0: Encoding and Transport", RFC 2565, April 1999. 1072 [RFC2566] 1073 R. deBry, T. Hastings, R. Herriot, S. Isaacson, P. Powell, 1074 "Internet Printing Protocol/1.0: Model and Semantics", RFC 2566, 1075 April 1999. 1077 [RFC2567] 1078 Wright, D., "Design Goals for an Internet Printing Protocol", RFC 1079 2567, April 1999. 1081 [RFC2568] 1082 Zilles, S., "Rationale for the Structure and Model and Protocol for 1083 the Internet Printing Protocol", RFC 2568, April 1999. 1085 [RFC2569] 1086 Herriot, R., Hastings, T., Jacobs, N., Martin, J., "Mapping between 1087 LPD and IPP Protocols", RFC 2569, April 1999. 1089 [RFC2639] 1090 Hastings, T., Manros, C., "Internet Printing Protocol/1.0: 1091 Implementer's Guide", RFC 2639, July 1999. 1093 6 Author's Addresses 1095 Tom Hastings 1096 Xerox Corporation 1097 737 Hawaii St. ESAE 231 1098 El Segundo, CA 90245 1100 Phone: 310-333-6413 1101 Fax: 310-333-5514 1102 e-mail: hastings@cp10.es.xerox.com 1104 Don Fullman 1105 Xerox Corporation 1106 737 Hawaii St. ESAE 231 1107 El Segundo, CA 90245 1109 Phone: 310-333-8342 1110 Fax: 310-333-5514 1112 Expires April 8, 2000 1113 e-mail: dfullman@cp10.es.xerox.com 1115 7 Full Copyright Statement 1117 Copyright (C) The Internet Society (1999). All Rights Reserved. 1119 This document and translations of it may be copied and furnished to 1120 others, and derivative works that comment on or otherwise explain it or 1121 assist in its implementation may be prepared, copied, published and 1122 distributed, in whole or in part, without restriction of any kind, 1123 provided that the above copyright notice and this paragraph are included 1124 on all such copies and derivative works. However, this document itself 1125 may not be modified in any way, such as by removing the copyright notice 1126 or references to the Internet Society or other Internet organizations, 1127 except as needed for the purpose of developing Internet standards in 1128 which case the procedures for copyrights defined in the Internet 1129 Standards process must be followed, or as required to translate it into 1130 languages other than English. 1132 The limited permissions granted above are perpetual and will not be 1133 revoked by the Internet Society or its successors or assigns. 1135 This document and the information contained herein is provided on an "AS 1136 IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK 1137 FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT 1138 LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT 1139 INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR 1140 FITNESS FOR A PARTICULAR PURPOSE. 1142 Expires April 8, 2000